| Age | Commit message (Collapse) | Author |
|---|
|
Occurrences in many manuals and one figure.
(From yocto-docs rev: 26d30cd162083c62216fb4ab526d0b231f453de1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I updated the figure for this section to include some stuff
for the extensible SDK. I updated the text supporting the
figure to cover the different SDKs and the different SDK
variable sets.
(From yocto-docs rev: 5aafab3e2e841293ddba45dfd8683cbdc223ed7c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updated the figure used to show SDK generation. I added a block
to cover the extensible SDK stuff. This affected the figures
folder in both the ref-manual and the mega-manual.
Updated the text section to support the new figure.
(From yocto-docs rev: b9fd7c2b0ea0e2fe1805a1bb1eb1bcb82c807b66)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added the SDKPATH variable to figure. It was missing.
Also, had to adjust the display parameters to get it to
display decently.
(From yocto-docs rev: 4862288ab4675051ec6fc93927839da7eb3634b6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The old version was off schematically. Moved some boxes around
and created more detail to reflect technical correctness.
(From yocto-docs rev: 7793101e6866c0c58d0f1202fb04769a21f2f882)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was a complete re-write of the YP Quick Start in an attempt
to streamline it, remove unecessary detail, and make it flow better
with the examples. In doing so, many manuals were affected due to
section headings being renamed, information being moved, etc. Here
is a list of the changes by manual:
Makefile - Removed two figures from TARFILE list for the
yocto-project-qs.
Added building-an-image.png to the ref-manual TARFILE list.
Added using-a-pre-build-image.png to the adt-manual TARFILE
list.
Repositioned 'eclipse' in the adt-manual TARFILE list.
adt-manual: Fixed a cross-reference so that it goes to the new
'Building Images' section that is within the YP QS.
Added new section 'Example Using Pre-Build Binaries and
QEMU' to hold the information that was formerly in YP QS.
dev-manual: Removed a cross-reference into the YP QS that promised how
to configure the most efficent build.
Changed a cross-reference into the YP QS from 'The Packages'
to 'The Build System Packages'.
Changed a cross-reference into the YP QS from 'Building an
Image' to 'Building Images'.
Changed a text reference from the YP QS to the adt-manual.
Moved the bit about getting YP files by using the YP website
from the YP QS to the dev-manual.
Changed a cross-reference into the YP QS from 'Using Pre-Built
Binaries and QEMU' to 'Example Using Pre-built Binaries and
QEMU', which was moved to the adt-manual.
ref-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto Project'.
Moved the note about if your system has oss4-dev in the
packages area in the YP QS to the appropriate area in the
ref-manual.
Moved the introduction information regarding building an image
along with the figure from YP QS to the ref-manual's section on
building images.
toaster-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto
Project'.
yocto-project-qs: Complete rewrite that changed many section headings and
removed much detail, which was placed in other manuals.
(From yocto-docs rev: da4ed8147b04963a700caa784bda709c57b4eb6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In response to community input where developers were attempting to
locate information on how to write packages out to a directory
other than ${DEPLOY_DIR}/<package_type>, I updated the "Package
Feeds" section, added several new DEPLOY_DIR_* variables, updated
four classes, and updated four tasks. Here are some details:
* Made changes to the "Package Feeds" section to provide more
accurate information in the package feeds directory structure
used by the build system in build/tmp. These changes included
updating the figure itself and some explanatory text.
* Updated the DEPLOY_DIR variable description.
* Added new variable descriptions for DEPLOY_DIR_DEB, DEPLOY_DIR_IPK,
DEPLOY_DIR_RPM, and DEPLOY_DIR_TAR.
* Updated the related classes: package_deb, package_ipk, package_rpm,
and package_tar.
* Updated the related tasks: do_package_write_deb, do_package_write_ipk,
do_package_write_rpm, and do_package_write_tar.
Reported-by: Trieu Nguyen <trieu.t.nguyen@intel.com>
(From yocto-docs rev: e8742267506bf9359346cfcd3965f762ed2c7d6f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #5601]
Discovered that the solution I had to display a small PNG file
to indicate the context a variable is used in the build system
was not displaying properly in the ref-manual variable glossary
when using the Chrome browser. The solution was to adjust some
settings in the CSS file and place the image after the term.
This allowed me to dump the webkit stuff that I had inserted
into the CSS file styles to make it work in Mozilla, which
ended up not working in Chrome.
Additionally, I needed to update the 'define-generic.png' file to
have less white space on top as part of the figure. Note that
this commit adds the figure to Git for tracking as well.
(From yocto-docs rev: 59a1295aeb1c866f330634907ad28642a997cd63)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Scrubbed the eglibc from the buildhistory directory and
also replaced with an i586 example.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: c7469f1a857f278e1adac9012d99802195e36849)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The figure needed to be updated to reflect that build-id.txt
is now part of the tree and not build-id.
The publication scheme dictates that figures are kept in
individual manuals and in the mega-manual figures directory.
(From yocto-docs rev: 0711a3e41c42eb058db25ff2ea7f1c0982e06963)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #5410]
I updated the figure that shows what do_rootfs does to create
the image. The new addition is the creation of the .manifest file
that lists out package information in the image. Supporting text
was also added in the section.
The updated figure was needed in both the ref-manual and
mega-manual figures folders.
Also, part of the fix included a new variable description for the
IMAGE_MANIFEST variable.
(From yocto-docs rev: 770448e0e8ce2e2c517ced5e71f5a916fefe5cf2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #5303]
Updated the figure to include a new folder named image-files.
Also changed the folder build-id to a file.
(From yocto-docs rev: eb6491858eabca3ce08ac1e4218b73e1ea7c893c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
I updated the figure to not call out the SDK environment setup
script as it is part of the .sh file. The figure was placed
in the "figures" directory of the ref-manual and the
mega-manual.
Also, I removed the duplicated variable descriptions and referenced
these descriptions in the "Application Development SDK" section,
which is further down in the manual. The descriptions have more
to do with where output is placed.
(From yocto-docs rev: 256bb1447b571299b57c657bf030d5b4f033fb5f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Updated the figure and placed it in the folders area for both
the ref-manual and mega-manual. I had to add the
DEPLOY_DIR_IMAGE variable and create a new machine-specific
directory below deploy. The text had to be adjusted to reflect
this change as well.
Also, created a new variable entry for DEPLOY_DIR_IMAGE for
the glossary of the ref-manual.
(From yocto-docs rev: 50a68810f854b32fa5dba477eafa8fd1eebbd7a4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Added a new figure to support the expanded section on SDK
generation. Figure added to "figures" directory for both
the ref-manual and the mega-manual. Updated Makefile to
include the figure in the TARBALL variable for both the
manuals.
(From yocto-docs rev: 41f78fddfd871fdd4c1c963b98093567d4b4d230)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Had to update the figure.
(From yocto-docs rev: 9b9b168bee84d32da0838da7940cb1ae7d780bee)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Applied review comments to the section from Paul Eggleton. I
updated the figure and the text areas.
(From yocto-docs rev: a89b126861e8ee2f43a89afb0a16e56659270fee)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Moved some variables around to make better sense of how I
think it works.
(From yocto-docs rev: 2f40edbb792d56808482fdc3a1bf3d3457673546)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Created the figure for the BitBake-resident image generation
discussion. Figure added to the Makefile so it is included
in the TARBALLS for ref-manual and mega-manual.
(From yocto-docs rev: 607c88dcf060a804475b2f4b9cf22f2d8172a61d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
The Build Directory should be inside the BB blue box here and
not outside of it. Adjusted the figure, which resides in
the figures directory of both the ref-manual and the
mega-manual. Also had to widen the image footprint to make
it readable.
(From yocto-docs rev: b4ff9292cf629894fda6ad4a29fbdaad85f43cd0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
I tweaked the SCM box in the figure so that the connection to
real SCMs is better. This was causing confusion.
(From yocto-docs rev: f4080315ab6b57068ab2fbb948c52f731d1ea5dd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The main changes are captured in a new section devoted to the
oe-init-build-env-memres script within the ref-structure.xml
file and in the variables.xml file in a BBSERVER variable entry
in the glossary.
All other changes were necessary to integrate the new functionality
into areas where running the setup script are discussed. Before
this feature, there was a single setup script (oe-init-build-env).
Consequently, wordings and such were designed exclusively for this
single method. With the introduction of a second possible method
to initialize the build environment, tweaks to many sections were
needed. Beside the wording tweaks, appropriate cross-referencing
was also needed.
All these changes cover the integration of the new feature.
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From yocto-docs rev: c55c9a53c9b4cd1e06e6e81e32d56f9bbf5fe98c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Found some errors in how I was labeling the various directories
created in the Build Directory upon image configuration. I corrected
the labeling by editing these two figures.
(From yocto-docs rev: 4a08ad8bda0617e18b9998b794267f743e445eaa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Updated the images and SDK figures so the outside box would be
red as that is what it is in the general figure.
(From yocto-docs rev: 8f43a328c68bdb96e6b7cc1086400c8e3493d3b7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
I made some small cosmetic corrections to two figures in the
expanded look at YP process chapter.
(From yocto-docs rev: 50950f7ae6ea87cde1a9228837aa15985c88b579)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Updated several figures to get rid of shadows and gradients in the
colors. This completes the work on getting the figures to all be
consistent.
(From yocto-docs rev: 9e59810ed4772cd75ffe1604b66afe16e9cf9c67)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Modified the BitBake box to have a "spatula" form to be like
the BitBake box in the more general diagram.
(From yocto-docs rev: f42867929336c807977a584fba42613cbca44dfc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Updated the analysis-for-package-splitting.png figure so that
the BitBake box has the "spatula" form used in the regular
overview picture.
(From yocto-docs rev: 4ef43f3a4f96b867ab0985aa70996abe4c2caf75)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Updated the configuration-compile-autoreconf.png figure so that
the general shape of the BitBake box represents the "spatula"
form used in the general overview figure.
(From yocto-docs rev: b4c81b94a3ced5645a92076022abc4a3938be5b3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO # 2808]
Updated the figure for patching so that it uses the "spatula"
type BitBake shape rather than a square box.
(From yocto-docs rev: 61c2bdc1a0d6f33d18f5fef1b0640213b899ec63)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Updated the figure to use the "spatula" type version of the
general BitBake box. Also had to adjust the width a bit to
get the figure to display correctly.
(From yocto-docs rev: 3049e20eb215b00e61dabed9c124fa8ebc6c946b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I modified the sdg.png figure that shows detail for SDK
generation by creating a spatula-like shape for the general
BitBake box.
(From yocto-docs rev: 597d121e8286d51be73f87594d2f99354621c112)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I updated several figures to implement some of Dave Stewart's
review feedback for the expanded section on the build process.
(From yocto-docs rev: abd78cd6eaad8173ef8f9b3376c323875e5c4542)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Applied review comments to the package splitting section in the
section that digs deeper into the build process. This involved
updating the figure that resides in both "figures" directories
of the ref-manual and the mega-manual. Also updated supporting
text throughout the section per Paul's comments.
(From yocto-docs rev: 34e3610d0c6912530f678e9f1fa4587aaaf9fc70)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Updated the figure per Paul Eggleton's feedback to be clearer.
The figure resides in both the ref-manual and the mega-manual.
(From yocto-docs rev: 8a0f391c9404582b3b7f62d740d5c0488a6220be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Added a new section to the expanded discussion on how builds
are done. This section is on package creation. A new figure
was added to both the ref-manual and mega-manual figures
directories.
(From yocto-docs rev: e31e5aeb7d93f3cfa4fc9c12e324f03a27b5f8ed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Added a new section on configuration and compilation for the
expanded discussion for the build process. This involved a new
figure that had to be added to both the ref-manual and
mega-manual figures directories.
(From yocto-docs rev: 9ba90c79990b79226d6e95e4a01ddedeccb94b35)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Updated a couple figures to be consistent for how directories
and their contents are displayed.
(From yocto-docs rev: 5a3d08b2543c5ea1f76d65d67bf8a5615f6b5a0e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Added a new sub-section to the BitBake section that takes a
closer look at the build process. Part of the requirements
was a new figure that had to be added to both the ref-manual
and the mega-manual figures directories.
(From yocto-docs rev: c40476b079cf5765b8228502f0ef33072f8b2b85)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Created a new section called "BitBake" that will provide an
expanded discussion of the basic YP build process. The
"BitBake" section has a new sub-section called "Source Fetching."
Part of the new section is a new figure named source-fetching.png.
The figure must reside in the "figures" directory in both the
ref-manual and the mega-manual. It must also be listed for each
of these manuals in the TARBALL statement in the Makefile.
(From yocto-docs rev: 41eff3e755a98ff31cadccfb1cd7dfcf569b4d9e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Applied review comments to the "Images" and SDK sections that
are part of the "A Closer Look at the Yocto Project Development
Environment" section. Comments from Paul. They resulted
in a single figure being removed and split into two new
figures - one for the image part and one for the sdk part.
Some terminology issues were cleaned up in the main sections
as well as the documented variables sections.
Makefile changes involved adding the two new figures and
removing the old combined one.
(From yocto-docs rev: a32908fa68b9786e295097c16f70a5a9c3cc4c1e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Added a new section for the closer look at how BitBake creates
images and the SDK installer files. This included the section
itself, a new .PNG figure that had to be added to the figures
directory of both the ref-manual and the mega-manual. Finally,
the Makefile needed to be edited so that the tarballs for the
ref-manual and mega-manual also included the new figure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
New section for package feeds created. Includes a new figure
also.
(From yocto-docs rev: 6d8b41114ebadcfb06f6064a13c4da5b47a9f73c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
I updated the "Sources" section with review comments from
Paul. The figure needed changed as well as some text changes.
(From yocto-docs rev: 0a44dbdebce50fb599b8dcb2f17adc76f9fb862c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
The "Sources" section provides a more detailed look at where
BitBake gets source files from. This change included the
first draft of the text and the first draft of the expanded
figure.
(From yocto-docs rev: 4e432a05666e67c6494486f392a05f629c6c148a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Some small changes to the layer figure and the software
layer wording.
(From yocto-docs rev: 687652a4970910de8a4636999f63ad5c7e861069)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
Applied review comments from Paul Eggleton on the user configuration
and the layers section. Changes applied to the figure for the
user configuration section as well.
(From yocto-docs rev: b05af4b740f0daf3d6c59acf71c362decba2a176)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
I applied extensive review comments to the user configuration
and to the layer sections. These revisions also included
updates to the two figures.
(From yocto-docs rev: 029692b07cb7dff605b81aa45de7c891a3a77db1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2808]
This figure is slightly different than our reference environment
figure used in the QS. I did not want to simply duplicate it.
Here the only difference is boxing in the metadata layer input
to the left.
(From yocto-docs rev: d1c8c69dfb5ec4261b8e5d15de6d5088fde86024)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: ff952a9681df798cde34b50d1046233a47ca0ce5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Scott Rifenbark
Scott Rifenbark