Age | Commit message (Collapse) | Author |
|
In prior round, the perl module recipes in recipes-extended/perl
were inadvertantly overlooked.
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
* Enable ptest by inheriting new ptest-perl.bbclass
* Install testfiles/ into PTEST_PATH
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
* Enable ptest by inheriting new ptest-perl.bbclass
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
* Enable pteset with new ptest-perl.bbclass
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
* Enable ptest using new ptest-perl.bbclass
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
Also, take over the other recipes that were just enabled for
ptest:
- liberror-perl
- liburi-perl
- libxml-parser-perl
- libxml-perl
- libxml-simple-perl
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
* Enable ptest by inheriting new ptest-perl.bbclass
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
* Enable ptest by inheriting new ptest-perl.bbclass
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
* Enable ptest by inheriting new ptest-perl.bbclass
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
* Enable ptest by inheriting new ptest-perl.bbclass
* Remove t/cwd.t and t/file.t which require "-T"
(taint) command line option as they will fail.
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
* Enable ptest by inheriting new ptest-perl.bbclass
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
Skip tests when modules not available
* Dependency for ptest of liburi-perl
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
* Enable easier testing of perl modules
- Installs t/* to PTEST_PATH
- Uses common run-ptest script
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As glibc 2.27 can't read older locale-archives, SDKs using glibc 2.27 on hosts
using glibc earlier than 2.27 won't be able to find any locales, so bitbake
won't start and Python can't use UTF-8.
So by default install all locales into the SDK. Special-case Extensible SDKs by
installing no locales as they ship glibc in a buildtools, and that will have the
locales.
Locale installation requires cross-localedef, so add that to DEPENDS.
Also remove the explicit en_US addition in buildtools-tarball as it is now
redundant.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- No need to use bb.utils.which() as subprocess will search $PATH
- Clarity flow by moving the install inside the try/except
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
localedef has no way to specify which locale archive to use, and the
compile-time default isn't useful as it points to the work directory.
Add support to read an environmental variable for the path, and don't fail to
write a new locale archive.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
nativesdk is built with a specific prefix but this will be different at install
time, however glibc hard-codes the path to locale files. Expand these strings to 4K and move them to a magic segment which we can relocate when the SDK is installed.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The result of running dbus-test-ptest was a series of
various segfaults, interpreted as FAILs. This was a direct consequence
of the test suite loading the installed shared library libdbus-1.so, not the
one built along the test suite.
While we normally want to test against the installed libraries, we cannot
do this in this case as the test suite expects a library that is configured/compiled
differently from the installed one. We could configure the installed library
identically as the test suite expects, (and there should be no issues), however
this is not desirable for performance reasons.
Hence we need to use the library built along with the test suite.
Of course, running the test suite against its own library does not
test the installed library, however they are both built from the same
sources so that can give us some kind of indication.
The following changes were made:
1. Configure the test library as close as possible to the installed one,
with some additional configuration options that are needed for testing.
(Use dbus_1.12.2.bb recipe as a template)
2. Include the shared libraries in the package, use LD_LIBRARY_PATH during
testing to load them instead of the installed ones.
3. Add a few more tests. (There are still some additional tests built that
are not used, but they would have to be special-cased).
4. When evaluating the test results, differentiate between "FAIL" and "SKIP"
[YOCTO #10841]
[YOCTO #12277]
(From OE-Core rev: 5d148aa9c3c338fabab1e60e2ca64d09c9b8477f)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The shlibs detection/handling iterates the package list twice, but PRIVATE_LIBS
is only fetched in the first loop which means the second loop only considers the
value set.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The recipe depends on many machine specific tasks and should be marked
as machine specific itself. This fixes signature tests after some dependency
issues were fixed at the bitbake level which exposed that issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* We now match on more than just target recipes, so don't specify that
only target recipes are searched.
* We're printing the SUMMARY value in addition to the name, so mention
that so it's clear where that text is coming from.
* Remind users that they should use quotes around the keyword to avoid
shell expansion when using regular expressions.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If pkgdata isn't present or is incomplete, then you get either a
traceback or you don't see the results you were hoping for. The recipe
cache that bitbake collects during startup contains some useful
information for each recipe that we could search through as well, and
we can access it easily using tinfoil's all_recipes() API function,
so add some code that does that. (We still show a warning if pkgdata
isn't present, as there are certain dynamic packages that are generated
at packaging time that won't show up in the cache).
One side-effect of this is that we will start showing non-target
recipes - that's actually a good thing, since seeing those is useful,
however we exclude nativesdk recipes when in the eSDK to avoid confusion
since nativesdk isn't directly applicable there.
Fixes [YOCTO #12356].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Prompted by bitbake commit 2ba8a6b25ccc12e7b543e8450121e5311c7a701d,
add .txz to the list of archives used within get_recipe_local_files()
here as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the user doesn't specify a port then we should avoid specifying one
on the ssh/scp command line in case the user has configured one for the
host they are connecting to, which was being overridden unnecessarily.
Fixes [YOCTO #12381].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
After OE-Core rev 5e3fe00a0233d563781849a44f53885b4e924a9c we call
os.path.abspath() on the original layer path, but we later compare that
to the destination layer path. If that layer path isn't absolute but is
effectively the same path, it should be writing to the original recipe
but because we weren't making it absolute we were writing a bbappend
instead. Call os.path.abspath() on the destination path as well to avoid
that.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the .devtool_md5 file doesn't contain a reference to the bbappend
file (e.g. because devtool was interrupted before it could write that
out) then _check_preserve() won't delete it, so we need to delete it
separately because otherwise the recipe won't actually be reset.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix two aspects of handling BBCLASSEXTENDed targets (e.g.
openssl-native) that have been run through "devtool upgrade":
* Fix recipe name not showing up in "devtool status"
* Fix "devtool reset" not deleting empty directories under the recipe
directory within the workspace, which may lead to problems if you
subsequently run "devtool upgrade" on the same target again
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In a few places we have checks to see path B is the parent of path A, by
adding / to the end of the path B and then seeing if path A starts with
the suffixed path B. Unfortunately there are two potential flaws:
(1) path A needs to be suffixed with / as well or the directory itself
won't match (semantics perhaps, but in a lot of scenarios returning True
is correct); (2) you need to run os.path.abspath() on both paths first
or you will wrongly return False for some relative paths where you
should return True. Let's solve this once and for all by writing a
function that takes care of these and put it in oe.path.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
atm, 'oe-init-build-env' expects 'bitbake' to be within the OE core git
repository. This complicates the project setup because you have to
manage the 'bitbake' directory or symlink manually (or specify the
bitbake location explicitly).
Looking for 'bitbake' outside the main git repository will ease project
management significantly. Now, you can put everything into git submodules,
clone the project with
| git clone --recursive ...
and continue immediately with
| ..../oe-init-build-env
E.g. when you had previously
| .
| |-- build/
| `-- sources/
| `-- org.openembedded.core/
| `-- bitbake -> ../bitbake
(where 'bitbake' must be created manually after cloning the project),
you can have now
| .
| |-- build/
| `-- sources/
| |-- bitbake/
| `-- org.openembedded.core/
which is completely managed by 'git'.
Patch adds $OEROOT/.. to the search path for 'bitbake'
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS supports the wildcard syntax,
these exclusions no longer need to be hardcoded
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The special string "*" on the left hand side of the dependency
specification matches all recipes except the one on the right hand side.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changes to the icecc-create-env recipe should not cause all recipes to
rebuild just because the have inherited icecc.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changing ICECC_ENV_VERSION or select variables that the user can set to
control the behavior of icecc should not cause recipes to rebuild
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
License-Update: checksum change is due to standardization of
character encoding of source tree on UTF-8
1. Remove upstreamed patch:
0001-signpost-Add-paranthesis-to-remove-doubt-about-prece.patch
2. Bump PE to prevent version going backwards
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrade to revision:
4ce0887e2f7f848d2be2e435a2d0f3c80e44ea3b
remove backported patch:
0001-tests-egl-egl-context-priority.c-Use-piglit_egl_get_.patch
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add missing Upstream-Status to the following patch:
0001-WebKitMacros-Append-to-I-and-not-to-isystem.patch
Upstream-Status is fetched from the first commit of the patch:
commit id: 700b846ba0e0f31b06459aee3ebb3ce5f1715918
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Create a common function for locating task manifest files rather than
several implementations with missing pieces.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently do_rootfs gets to see all rpms in the deploy directory. This filters
that view to only rpms which the image recipe has actual depends upon which
potentially removes some sources of confusion in the image construction.
This makes builds more reproducibile and also fixes contamination issues
where dnf picks up packages it shouldn't be able to 'see'.
[YOCTO #12039]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make sure that we're passing a bool value. Without this, buildhistory
shows all the output for all the keys/fields when it shouldn't be by
default.
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Remove debian.patch which is already in the source.
* License-Update: The license is changed to GPLv3, and move v2 one to meta-gplv2.
* Merge time.inc into time_1.8.bb.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|