aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2016-02-24sanity.bbclass: remove conflict checking for image vm and liverbt/syslinuxRobert Yang
[YOCTO #9161] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-02-24syslinux.bbclass: make vm and live can be built togetherRobert Yang
* The vm image(hdddirect, vmdk, qcow2, vdi) and live image (hddimg, iso) couldn't be built together because the following vars settings are conflicted: - SYSLINUX_ROOT (/dev/sda2 vs /dev/ram0) - LABELS (boot vs boot install) - INITRD (None vs live install) - SYSLINUX_CFG (see above) Introduce new vars (SYSLINUX_ROOT_VM/_LIVE, the samilar to others) to make them can work together, now we can build all of them together: IMAGE_FSTYPES += "live iso hddimg hdddirect vmdk qcow2 vdi" * Use SYSLINUX_CFG rather than SYSLINUXCFG to keep align with others SYSLINUX vars. * The SYSLINUX_TIMEOUT had been set, but it didn't work since AUTO_SYSLINUXMENU wasn't set, this would cause confusions, so also set AUTO_SYSLINUXMENU. * Move SYSLINUX_PROMPT and SYSLINUX_TIMEOUT to syslinux.bbclass rather than in separate classes since they are the same. * Set SYSLINUX_TIMEOUT to 50 to have a unique timeout for syslinux. [YOCTO #9161] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-02-24boot-directdisk.bbclass: drop IS_VM chechkingRobert Yang
The IS_VM was used for making menus for vmdk, vdi and qcow2, except hddimg, there is no reason to not make menus for hddimg, so drop it. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-02-24image-live/boot-directdisk.bbclass: remove AUTO_SYSLINUXCFGRobert Yang
No one uses it. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-02-22uclibc: Do not use immediate expansion operatorKhem Raj
:= causes none of _remove flags to work with uclibc e.g. security flags where we remove ssp options for libcs but it does not become effective for uclibc and hence the build fails Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-22security_flags: Disable ssp when compiling uclibcKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-22rpm: fix building rpm 5 with internal beecryptJoshua Lock
RPM 5 cannot be built without beecrypt, therefore the EXTRA_OECONF arguments to pass when the beecrypt PACKAGECONFIG is disabled should enable the internal/bundled beecrypt. [YOCTO #9150] Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-22alsa-lib: topology: Add missing include sys/stat.hMaxin B. John
Fixes this build error with uclibc: alsa-lib-1.1.0/src/topology/parser.c: In function 'snd_tplg_build_file': alsa-lib-1.1.0/src/topology/parser.c:262:35: error: 'S_IRUSR' undeclared (first use in this function) open(outfile, O_RDWR | O_CREAT, S_IRUSR | S_IWUSR); Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-22libsdl2: Fix patch after upgradeRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-22gstreamer1.0-libav_git: update 1.7.1 -> 1.7.2Andre McCurdy
Hash for libav LICENSE.md updated due to dropping libaacplus: https://github.com/FFmpeg/FFmpeg/commit/9ba54c1b82a81581e5283da75c153a76f04324c0 Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-22gstreamer1.0-plugins-ugly_git: update 1.7.1 -> 1.7.2Andre McCurdy
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-22gstreamer1.0-plugins-bad_git: update 1.7.1 -> 1.7.2Andre McCurdy
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-22gstreamer1.0-plugins-good_git: update 1.7.1 -> 1.7.2Andre McCurdy
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-22gstreamer1.0-plugins-base_git: update 1.7.1 -> 1.7.2Andre McCurdy
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-22gstreamer1.0_git: update 1.7.1 -> 1.7.2Andre McCurdy
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21libnewt: Fix build with PIE flagsKhem Raj
security flags add -pie -fpie to CFLAGS which is not right options for compiling .so files, they are only useful for compiling executables Signed-off-by: Khem Raj <raj.khem@gmail.com>
2016-02-21pseudo: Fix build when security flags are enabledKhem Raj
filter out PIE options Signed-off-by: Khem Raj <raj.khem@gmail.com>
2016-02-21glibc: Upgrade to 2.23Khem Raj
Drop kconfig and options-group support Forward port cross-localedef support Assume ssp support in libc when building gcc-initial Signed-off-by: Khem Raj <raj.khem@gmail.com>
2016-02-21no-static-libs: remove eglinfoRoss Burton
waf.bbclass disables no-static-libs for all waf recipes, so we don't need to have it explicitly disabled here now. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21freetype: use autotools instead of a manual do_configureRoss Burton
autotools.bbclass has enough variables now that we can use it instead of hand-coding a do_configure. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21classes/populate_sdk_ext: add a better config extension mechanismPaul Eggleton
The sdk_extraconf() method of setting the configuration was awkward since you needed to set it in a class and then inherit that class since function definitions aren't allowed in conf files. It seemed to me the a neater way to do this was to read the extra lines from an additional conf file sdk-extra.conf (which can be located in a conf/ directory anywhere along BBPATH as with other configuration files). Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21recipetool: create: improve CMake package mappingPaul Eggleton
* Package names are actually case sensitive near as I can tell, so we shouldn't be lowercasing them everywhere. * Look for CMake packages in pkgdata and map those back to recipes, so we aren't dependent on the hardcoded mappings (though those are still preserved). * Avoid duplicates in the unmapped package list Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21recipetool: create: add additional extension mechanismsPaul Eggleton
Add a means of extending the dependency extraction for autotools and cmake. Note: in order to have this work, you need to have an __init__.py in the lib/recipetool directory within your layer along with the module implementing the handlers, and the __init__.py needs to contain: # Enable other layers to have modules in the same named directory from pkgutil import extend_path __path__ = extend_path(__path__, __name__) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21devtool: modify: tweak help description for behaviour changePaul Eggleton
I should have adjusted this in OE-Core commit 80a44e52609a89d9ffe816181ae193af491c06ac where the behaviour changed. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21devtool: deploy-target: preserve existing filesPaul Eggleton
If files would be overwritten by the deployment, preserve them in a separate location on the target so that they can be restored if you later run devtool undeploy-target. At the same time, also check for sufficient space before starting the operation so that we avoid potentially failing part way through. Fixes [YOCTO #8978]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21devtool: undeploy-target: support undeploying all recipesPaul Eggleton
If you want to put the target device back to exactly how it was before devtool deploy-target started poking things into it, then it would make things easier if you didn't have to figure out which recipes were deployed. Now that we have the list stored on the target we can determine this reliably, so add a -a/--all option to undeploy-target to undeploy everything that has been deployed. One of the side-effects of this is that the dry-run functionality for undeploy-target had to be reimplemented to actually run the script on the target, since we have no way of knowing what's been deployed from the host side. We don't need to do the same for deploy-target though since we know exactly which files will be deployed without referring to the target. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21devtool: deploy-target: write deployed files list to targetPaul Eggleton
When running devtool deploy-target, we save a list of deployed files, and this list is used by devtool undeploy-target (or the next time deploy-target is run if the list is present, in case any files have been renamed or deleted since the first time). We were writing this file to the host, but it makes more sense to write the list to the target instead, so that if we for example swap in a different board, or switch hosts, things will work as expected. In order to do this properly we have to construct a shell script and ship it over to the target so we can run it. The manifest is written out to a hidden directory in the root (/.devtool). Fixes [YOCTO #7908]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21devtool: sdk-update: tweak command-line handling of updateserverPaul Eggleton
Get the default value for updateserver from the configuration file and show it in the help; also only make the parameter optional if it's specified. This means we can also drop the check in the function as argparse will then ensure it's specified if there's no config setting. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21devtool: (un)deploy-target: add help descriptionsPaul Eggleton
Add a long description used when running --help on the specific command. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21scripts/lib/argparse_oe: tweak title above optionsPaul Eggleton
Naming these as "optional arguments" is perhaps slightly confusing since some of the positional arguments might also be optional; in addition it's rare (though possible) for options to be mandatory - up until recently we had a recipetool option (-o) that was mandatory. It's not perfect, but change it to "options" so it's at least a bit more appropriate. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21devtool: categorise and order subcommands in help outputPaul Eggleton
The listing of subcommands in the --help output for devtool was starting to get difficult to follow, with commands appearing in no particular order (due to some being in separate modules and the order of those modules being parsed). Logically grouping the subcommands as well as being able to exercise some control over the order of the subcommands and groups would help, if we do so without losing the dynamic nature of the list (i.e. that it comes from the plugins). Argparse provides no built-in way to handle this and really, really makes it a pain to add, but with some subclassing and hacking it's now possible, and can be extended by any plugin as desired. To put a subcommand into a group, all you need to do is specify a group= parameter in the call to subparsers.add_parser(). you can also specify an order= parameter to make the subcommand sort higher or lower in the list (higher order numbers appear first, so use negative numbers to force items to the end if that's what you want). To add a new group, use subparsers.add_subparser_group(), supplying the name, description and optionally an order number for the group itself (again, higher numbers appear first). Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21devtool: update-recipe: don't show workspace recipe warning if no updatePaul Eggleton
If we didn't make any changes to the file then there's no point warning the user that we have done. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21devtool: reset: fix preserving patches/other files next to recipesPaul Eggleton
If files had been created next to the recipe (for example devtool add, edit the source and commit and then devtool update-recipe), running devtool reset failed to preserve those files and gave an error due to trying to rmdir the directory containing them which wasn't empty. Fix the preservation of files in the "attic" directory properly so we catch anything under the directory for the recipe, and replicate the same structure in the attic directory rather than slightly flattening it as we were before. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21devtool / recipetool: use common code for launching editorPaul Eggleton
Looking at Chris Larson's code for starting the user's editor for "recipetool newappend" it was slightly better than what I wrote for "devtool edit-recipe" in that it checks VISUAL as well as EDITOR and defaults to vi if neither are set, so break this out to its own function and call it from both places. The broken out version passes shell=True however in case it's a more complicated command rather than just a name of an executable. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21devtool: minor fix for error messagePaul Eggleton
There is no -N/--name option for devtool, that's a recipetool option - with devtool you just specify the name as a positional argument. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21staging.bbclass: remove trail slash from SYSROOT_DESTDIRRobert Yang
Fixed path: QA Issue: <foo> sysroot-destdir//usr/lib/ <foo> Note the 2 slashes "//". Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21terminal.bbclass: import oe.terminal for oe.terminal.prioritized()Robert Yang
Fixed: INHERIT += "typecheck" $ bitbake -p ERROR: Failure expanding expression auto none ${@" ".join(o.name for o in oe.terminal.prioritized())} which triggered exception AttributeError: 'module' object has no attribute 'terminal' Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21recipe_sanity.bbclass: skip DataSmart in recipe_sanity_eh()Robert Yang
Fixed: $ bitbake quilt -crecipe_sanity File "/path/to/poky/bitbake/lib/bb/siggen.py", line 261, in dump_sigtask p = pickle.dump(data, stream, -1) PicklingError: Can't pickle <COWDict Level: 1 Current Keys: 0>: attribute lookup bb.COW.C failed This is because of: cfgdata[k] = d.getVar(k, 0) If d.getVar(k, 0) is a DataSmart (for example, BB_ORIGENV), it won't have the attribute of bb.COW.C, so the error happend. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21image.bbclass: fix circular dependency when IMAGE_FSTYPES append hddimgRobert Yang
Fixed: IMAGE_FSTYPES_append = " hddimg" $ bitbake -g core-image-minimal-initramfs NOTE: Resolving any missing task queue dependencies NOTE: Preparing RunQueue ERROR: Task /path/to/core-image-minimal-initramfs.bb (do_bootimg) has circular dependency on /path/to/core-image-minimal-initramfs.bb (do_image_complete) ERROR: Command execution failed: Exited with 1 This is because IMAGE_FSTYPES = "${INITRAMFS_FSTYPES}", and if IMAGE_FSTYPES append hddimg, then core-image-minimal-initramfs.bb would be circular dependency: do_bootimg -> do_image_complete -> do_bootimg. Now we check and error out. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21toolchain-scripts.bbclass: add three other path to PATH in env.shJun Zhang
in sdk,there are some utils in sysroot/host-os/bin, sysroot/host-os/sbin/,sysroot/host-os/usr/bin need to use, so add these three paths to PATH in env.sh. Signed-off-by: Jun Zhang <jun.zhang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21libsoup-2.4: disable libsoup-gnome by defaultAndre McCurdy
libsoup-gnome is entirely deprecated and has just been stubs since 2.42. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21libsoup-2.4: prevent PACKAGECONFIG dependant package renamingAndre McCurdy
When built without gnome support, libsoup-2.4 will contain only one shared lib and will therefore become subject to renaming by debian.bbclass. Prevent renaming in order to keep the package name consistent regardless of whether gnome support is enabled or disabled. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21libsoup-2.4: minor formatting improvementsAndre McCurdy
Also update HOMEPAGE from generic Gnome to something libsoup specific. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21populate_sdk_ext.bbclass: Add SDK_RECRDEP_TASKS variableRandy Witt
Currently there isn't a way for the extensible sdk to know all the tasks that will need sstate for an image. This is because a layer can add it's on custom tasks that are required for an image to be generated. The extensible sdk solved this for poky by using recrdeptask and specifying the tasks known to be required for the image as well as for building new recipes. So the SDK_RECRDEP_TASKS variable allows a user to specify additional tasks that need to be pulled in. Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21devtool: Don't recursively look for .devtoolbase in --basepathRandy Witt
If the user specifies --basepath on the commandline, only the directory specified should be searched for .devtoolbase. Otherwise when --basepath is a child of the sdk directory, .devtoolbase will always be found and devtool will only show options meant to be used within an sdk. Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-21populate_sdk_ext: Don't ignore SDK_TARGETS valueRandy Witt
This fixes a problem where SDK_INSTALL_TARGETS wouldn't pick up the value in SDK_TARGETS. It also removes the inline python to make the code more readable. Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-19cml1/sstate: Fix missing getVar parameterRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-19linux-yocto/4.1: capabilities backportsBruce Ashfield
Backporting the following upstream commits to the 4.1 yocto tree: bdf4565e5dcc capabilities: add a securebit to disable PR_CAP_AMBIENT_RAISE 2483c95caedc selftests/capabilities: Add tests for capability evolution 4c274aa74e5d capabilities: ambient capabilities Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-19waf.bbclass: Remove --disable-static from EXTRA_OECONFFabio Berton
As of commit OE-Core:773c9e18071d71454473dd81aff911104a2e9bc6 EXTRA_OECONF is appended with the option --disable-static on DISABLE_STATIC variable and this cause the error: waf: error: no such option: --disable-static So, we need to disable this option. Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-19gcc-5.3: backport fix for PR-target-65358Martin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-25 01:37:03 +0000