aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2016-04-12linux-yocto-tiny: update SRCREV_meta to support /proc/sysrbt/sysRobert Yang
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-04-12archiver: Ensure sstate-inputdir directory is createdRichard Purdie
Without this, do_archive_sources will fail for the gcc tasks where there is common source and the other tasks are not added as dependencies. The failure happens when trying to restore these tasks from sstate. To fix this ensure the sources directory is created as expected by the sstate code. [YOCTO #9433] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-12linux-yocto-tiny: fix COMPATIBLE_MACHINERobert Yang
It only works with qemux86, but mismatched qemux86-64 which caused runtime errros. (kernel is bigger, can't boot, no output, and so on). Add '$' in the end to fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-12glib-2.0: Put glib-compile-schemas back in -utilsJussi Kukkonen
Commit cc97d576 moved a bunch of development tools to the -dev package. glib-compile-schemas is actually used in postinst by gsettings.bbclass so it needs to be available on target at package install time: Move the tool back to glib-2.0-utils which gsettings.bbclass depends on. Fixes [YOCTO #9431]. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-12oeqa/runexported.py: Fix exported testMariano Lopez
With the changes introduced to test the eSDK the runexported test failed during the execution. This change fix runexported test in the least invasive way, because of the release cycle. Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-11oeqa/selftest/sstatetests: split 32/64 build host from no-op action testsRoss Burton
As more variables were being added it made sense to split this test into two: one quick test that verifies that the host being 32-bit or 64-bit doesn't impact the hashes, and another which compares stamps for two builds with several variables changed and classes inherited. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-11util-linux: take ownership of hwclock if installedRoss Burton
Previously util-linux had a lower priority for hwclock than busybox but the reasoning was lost in the mists of time, with just this enigmatic comment remaining: There seems to be problem, atleast on nslu2, with these, until they are fixed the busybox ones have higher priority. Chasing the comment back through history it first appeared in the following oe-classic commit: commit 5e01906b8433bc6a8c03be2e31758589641124c9 Author: David Karlstrom <daka@thg.se> Date: Sat Jul 23 13:36:38 2005 +0000 Updated to use update-alternatives and fix some FHS bugs Which doesn't really give a lot away. Let's assume that in the past eleven years both hwclock and hardware have improved, and restore util-linux's hwclock to it's intended priority. [ YOCTO #9103 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-11meta: remove redundant ac_cv_sizeof_off_t assignmentsRoss Burton
ac_cv_sizeof_off_t was previously in the site cache files, which was breaking large file support and required a workaround in each recipe that actually wanted to use large files. Now that the entry has been removed from the site cache, we can remove the workarounds. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-11meta/site: remove sizeof_off_tRoss Burton
The size of off_t depends on whether large file support is enabled through preprocessor flags, so we can't cache this. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-09archiver: Fix ASSUME_PROVIDED issuesRichard Purdie
Currently the dependencies injected by this class for recipes in ASSUME_PROVIDED e.g. tar-native or chrpath-native are ignored. We need to use their "replacement" names, e.g. tar-replacement-native. This avoids broken archives and sstate failures with these recipes. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-09distrodata: Exclude DATETIME reference from sstate checksumRichard Purdie
Otherwise the task hash changes between server and worker context leading to changing task checksums. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-09build-appliance-image: Support for VirtualBox guest additionsJuro Bystricky
Add support for VirtualBox guest additions. The additions are built inside the Build Appliance VM. For this to be possible, the environment for out-of-tree kernel module builds must be present and set up properly. A README file with detailed steps on how to build the guest additions is placed in the home directory of the user "builder" as well. The main purpose of the guest additions is to allow sharing folders between the host and Build Appliance VM. [YOCTO #8073] Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-09local.conf.sample: Make it possible to override EXTRA_IMAGE_FEATURESPeter Kjellerstedt
It should be possible to override EXTRA_IMAGE_FEATURES in auto.conf, which is read before local.conf. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-09oeqa/selftest/wic: add test case for sparse imagesJoshua Lock
Add a testcase to build a directdisk image and check that the used disk size is less than the apparent size, as wic now assembles images as sparse files. Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-09wic/utils/partitionedfs.py: assemble .wic images as sparse filesJoshua Lock
The individual partitions created by wic are sparse but without this change the assembled image is written as one (potentially very) large file. Preserve sparseness in the assembled image by passing the sparse conversion symbol. [YOCTO #9099] Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-09image-vm.bbclass/image_types.bbclass: IMAGE_NAME -> IMAGE_LINK_NAMERobert Yang
If we create hdddirect in the first time, and run bitbake to create vmimg in the second time, then the previouse created ${IMAGE_LINK_NAME}.hdddirect may can not be found since it contains the data string which are different. Use IMAGE_LINK_NAME to fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-09image_types.bbclass: fix elfRobert Yang
Fixed: | DEBUG: Executing shell function do_image_elf | Cannot open `/path/to/tmp/sysroots/qemux86-64/usr/src/kernel/bzImage': (null) | WARNING: exit code 1 from a shell command. The bzImage is in DEPLOY_DIR_IMAGE Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-09image_types.bbclass: set nodesize for btrfsRobert Yang
The default value is 16K which is too big to create image for core-image-minimal: rootfs.btrfs is too small to make a usable filesystem Minimum size for each btrfs device is 41943040. Use 4K as ext2/3/4 to fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-09libxml2: fix AM_PATH_XML2Robert Yang
The code: suppose $1 == 2.7: verdep=ifelse([$1], [], [], [>= $1]) results in: verdep=>= 2.7 This is wrong in shell: bash: 2.7: command not found Use quotation marks to fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-09useradd_base.bbclass: prevent variable expansion in $optsMark Asselstine
Many user/group operations will involve hashes which will include '$' followed by a number or even possibly an env. variable name. Passing $opts to flock requires that we take additional precautions to prevent the unexpected expansion of these instances. This was found by an image which used usermod operations to set the password hash for root. The image could not be logged-in to and examining /etc/shadow clearly showed that $0 and other $* variables had been expanded unexpectedly. This change returnes the behavior to what existed prior to commit 2ebf697b46c42cee8bfa6d2e6087397f8cce385c [useradd_base.bbclass: replace retry logic with flock]. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-09extrausers.bbclass: drop retry count for perform_user/group* callsMark Asselstine
Commit 2ebf697b46c42cee8bfa6d2e6087397f8cce385c [useradd_base.bbclass: replace retry logic with flock] dropped the 3rd (retry) parameter for these functions. These are simply being ignored now but we should remove the retry count to avoid confusion. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08build-perf-test: add eSDK installed size to metricsRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08rpm: brace expansion is a bashismRoss Burton
The constuct rm *.{a,la} is a bashism and as tasks are run under /bin/sh this may not work as expected. Expand the {a,la} to two separate calls, and remove the architecture-specific macro deletion as they are not installed in the first place anymore. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08openssl.inc: minor packaging cleanupAndre McCurdy
libcrypto.so was explicitly added to FILES_${PN}-dev as part of moving libcrypto from libdir -> base_libdir to support dhclient [1]. However, the line has been unnecessary since ${base_libdir}/lib*.so files started to be included in FILES_${PN}-dev by default [2] (and it's still unnecessary now, after moving libcrypto from back to libdir to support ntp [3]). [1] http://git.openembedded.org/openembedded-core/commit/?id=01ea85f7f6c53c66c76d6f832518b28bf06ec072 [2] http://git.openembedded.org/openembedded-core/commit/?id=66c36bcb7d9368718453265e58bd5e3c854c786a [3] http://git.openembedded.org/openembedded-core/commit/?id=0be2ab32f690a2fcba0e821abe11460958bbc6dc Also define FILES_libssl using SOLIBS instead of a hardcoded pattern. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08systemd-systemctl-native: fix unit detectionRoss Burton
The regexs were too strict and didn't allow for trailing whitespace. [ YOCTO #9337 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08apr-util: fix path in rules.mk for nativesdkRobert Yang
Fixed when build nativesdk-apr-util: | gawk: fatal: can't open source file `/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/build-1/make_exports.awk' for reading (No such file or directory) The ${S} should be ${B}. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08bdwgc: installed-vs-shipped for nativesdkRobert Yang
Fixed: ERROR: nativesdk-bdwgc-7.4.2-r0 do_package: QA Issue: nativesdk-bdwgc: Files/directories were installed but not shipped in any package: /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/gc /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/gc/porting.html /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/gc/gcinterface.html /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/gc/gcdescr.html /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/gc/README.solaris2 [snip] This was caused by hardcode of datadir. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08libsolv: fix installed-vs-shipped for nativesdkRobert Yang
Fixed: ERROR: nativesdk-libsolv-0.6.19-r0 do_package: QA Issue: nativesdk-libsolv: Files/directories were installed but not shipped in any package: /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3 /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1 /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-constantids.3 /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv.3 /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-history.3 /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-pool.3 /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-bindings.3 /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/mergesolv.1 /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/testsolv.1 /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/installcheck.1 /opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/dumpsolv.1 It checks ${CMAKE_INSTALL_PREFIX}/share/man when configure, but it may not exist when crosscompile, for example, when CMAKE_INSTALL_PREFIX="/", it is OK, but when CMAKE_INSTALL_PREFIX="/some/path/else", then it doesn't exist, and the man dir would be set to "/usr/man" which is incorrect. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08desktop-file-utils-native: disable emacsRobert Yang
Fixed when len(TMPDIR) == 410: | ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] | /bin/bash: line 12: 903 Aborted emacs --batch $am__subdir_includes -L Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08toaster: add DL_DIR and SSTATE_DIR to oe toasterconfEd Bartosh
Add the DL_DIR and SSTATE_DIR to the toasterconf with defaults set We now support per project sharing of the DL_DIR and SSTATE_DIR in toaster. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08toaster.bbclass: strip task from the targetEd Bartosh
Current code in toaster_buildhistory_dump assumes that bitbake target doesn't contain task name. It uses target as a part of path to the files with data that it analizes. It fails to find files if target contains task name. Stripping task from the target should solve this. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08x11-common: Add PACKAGECONFIG for screen blankingJussi Kukkonen
when "blank" is not in PACKAGECONFIG, explicitly set dpms and screensaver off. The intention here is to make it easier to create builds that should not blank the screen (just remove "blank" from x11-common PACKAGECONFIG). Also remove a unneeded "find -exec rm" from do_install. Partly fixes [YOCTO #7278]. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08opkg-utils: re-do find/ls code to not fail on filenames with spacesDenys Dmytriyenko
Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08image-live.bbclass: fix iso + efi onlyRobert Yang
When the user only builds iso + efi only, the syslinux-native which provides isohybrid is required to build iso, so add syslinux-native to DEPENDS. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08Add missing runtime dependency to python-pygobjectChris Trobridge
Signed-off-by: Chris Trobridge <christrobridge@hotmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08devtool: Create unlocked-sigs.inc containing items in the workspaceRandy Witt
When a recipe is added to the workspace, the signatures for the tasks will change. This means that bitbake must be told to allow the signatures to be different if they are in locked-sigs.inc. This is done by creating an unlocked-sigs.inc file which contains all the recipes in the workspace each time devtool reads the workspace. So not only will necessary things get added, previously added items will be removed by virtue of them no longer being in the workspace. This also makes sure that the extensible sdk picks up unlocked-sigs.inc as part of the configuration. [YOCTO #9195] Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08sstatesig.py: Add a method to "unlock" recipesRandy Witt
In order to support workflows using devtool where a user might want to modify tasks that exist in locked-sigs.inc, there must be a way to unlock recipes. This patch adds that support by allowing the user to add recipes to SIGGEN_UNLOCKED_RECIPES. Recipes that exist in that variable will have all their tasks unlocked, as well as any tasks that depend on that recipe. For example if foo->bar->baz, if you unlock baz, it will also unlock bar so that foo can be rebuilt without explicitly specifying bar as being unlocked. [YOCTO #9195] Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08populate_sdk_ext.bbclass: Enable locked sigs errorsRandy Witt
With the extensible sdk we want there to be an error if a task tries to run without signatures that match locked-sigs.inc. This patch enables that error. [YOCTO #9195] Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08sstatesig.py: Improve the SIGGEN_LOCKEDSIGS_TASKSIG_CHECK messageRandy Witt
The previous message when signatures didn't match between the metadata and the locked signatures file, the message output was a bit confusing. Now the message should be of the form: The zlib-native:do_install sig is computed to be 53531910a2a7848432da89def942a91a, but the sig is locked to d25ba9035f7ccb308e51bbe1066e8d27 in SIGGEN_LOCKEDSIGS_t-x86-64 which will hopefully be more useful in understanding the problem. [YOCTO #9195] Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08sstatesig.py: Split single locked sigs check into multiple checksRandy Witt
Add the SIGGEN_LOCKEDSIGS_TASKSIG_CHECK and SIGGEN_LOCKEDSIGS_SSTATE_EXISTS_CHECK variables to replace SIGGEN_LOCKEDSIGS_CHECK_LEVEL. SIGGEN_LOCKEDSIGS_TASKSIG_CHECK will no control whether there is a warning or error if a task's hash in the locked signature file doesn't match the computed hash from the current metadata. SIGGEN_LOCKEDSIGS_SSTATE_EXISTS_CHECK will control whther there is a warning or error if a task that supports sstate is in the locked signature file, but no sstate exists for the task. Previously you could only have warning/errors for both controlled by SIGGEN_LOCKEDSIGS_CHECK_LEVEL. This was an issue in the extensible sdk, because we know sstate won't exist for certain items in the reverse dependencies list for tasks. However, we still want to error if task signatures don't match. [YOCTO #9195] Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-08local.conf.sample: remove reference to adtYi Zhao
Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-07toasterconf.json: Set default distro to nodistroKhem Raj
This makes it self-sufficient with OE-Core Generate ext4 instead of ext3, most of Qemu targets in oe-core now use ext4 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-06build-appliance-image: Update to master head revisionRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-06build-appliance-image: Update to master head revisionRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-06build-appliance-image: Update to master head revisionRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-06image_types: use compress framework to produce checksums for imagesAlexander D. Kanevskiy
Existing compress framework for producing various compressed versions of images is powerfull enough to be extended for other uses, e.g. to convert types of images. It is possible to use it also to produce image checksums at the time of image generation. This commit adds support for all supported at the moment coreutils hashing algorithms: md5, sha1, sha224, sha256, sha384 and sha512 Usage: IMAGE_FSTYPES_append = " hddimg.sha256sum" Signed-off-by: Alexander D. Kanevskiy <kad@kad.name> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-06runqemu-gen-tapdevs: Add note about NetworkManager & tap devicesSaul Wold
NetworkManager can clobber tap devices if left alone, this gives a note about how to set tap* as unmanaged [YOCTO #8587] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-06libtool: fix contaminated path to lt_truncate_binAlexandru Moise
lt_truncate_bin path is contaminated by the path from the sysroot directory for the build host. Steps to reproduce this issue: $ bitbake -c cleanall libtool $ bitbake coreutils-native $ bitbake libtool $ grep -in "lt_truncate_bin=" tmp/work/*/libtool/*/image/usr/bin/libtool Signed-off-by: Alexandru Moise <alexandru.moise@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-06create-pull-request: fix for newer gitRobert Yang
Fixed when git > 2.1.0: $ ./scripts/create-pull-request -r HEAD^ -u contrib -b rbt/git fatal: Not a valid revision: rbt/git ERROR: git request-pull reported an error This is because newer git requires both local and remote branch named as rbt/git, but usually, we only named the remote branch as rbt/foo, and foo for local branch. Add a option '-l' to fix the problem, default is HEAD. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-06wget: fix build when len(TMPDIR) == 410Robert Yang
Fixed: aclocal: error: cannot open [snip] |: Argument list too long Set acpaths to fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>