aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2016-09-05oeqa/parselogs/qemuarm: Whitelist amba and jitter for 4.8+ kernelsBruce Ashfield
With the update to the 4.8 kernel the versatile platform (and hence qemuarm) has switched to a device tree boot. We are using an ummodified mainline kernel versatilepb device tree, which includes definitions of multiple amba devices. These devices are not present in the qemu system emulation, hence throw warnings during boot. These warnings are not unique to oe-core, and rather than carry kernel patches to the device tree (for now), we whitelist the known warnings so qa testing will pass. We also can't turn amba off completely, since it is providing valid devices (like the serial port) and AMBA is force selected by other kconfig values. We also have a jitterentropy warning that shows up on some hosts. This warning is harmless, and like amba we can't turn it off in a fragment since it is force selected by crypto (and we'd rather not turn all crypto off). So we add it to the whitelist while investigations continue into what is needed in the host to support this fully. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-05cryptodev: Add backported patches for 4.6+ kernelsRichard Purdie
This allows 4.6 onward kernels to build, backported from upstream master. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-05linux-yocto/4.x: configuration updatesBruce Ashfield
Integrating a series to expliclity set the quark build to 32 bits and avoid 64 bit x86 defaults. We also have a series of commits that fix configuration warnings on x86 platforms: intel-quark.cfg: Explicitly disable CONFIG_64BIT common-pc-drivers.cfg: Remove I2O configs features: Fix dependencies and =m vs =y discrepancies for corei7 intel-core2-32.cfg: Explicitly disable CONFIG_64BIT features: Add 6lowpan feature and add it where necessary Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-05kernel-yocto: do_kernel_configme: Fix silent sysroot poisoning errorIoan-Adrian Ratiu
do_kernel_configme calls merge_config.sh (installed in the sysroot by the kern-tools-native recipe) which may invoke the compiler to complete the configuration process. Depending on the build (and dependencies), this may error due to sysroot poisoning [1]. The errors are similar to: make[1]: Entering directory '4.1+gitAUTOINC+a7e53ecc27-r0/linux-x64-standard-build' HOSTCC scripts/basic/fixdep work-shared/x64/kernel-source/scripts/basic/fixdep.c:106:23: fatal error: sys/types.h: No such file or directory compilation terminated. make[2]: *** [work-shared/x64/kernel-source/scripts/basic/Makefile:22: scripts/basic/x86_64-nilrt-linux-fixdep] Error 1 Adding $TOOLCHAIN_OPTIONS to $CFLAGS before calling merge_configs.sh fixes the error because $TOOLCHAIN_OPTIONS defines the sysroot and make uses it to correctly compile & fill all missing kernel config options. [1] http://lists.openembedded.org/pipermail/openembedded-core/2014-October/098253.html Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-05kernel-yocto: test for empty artifactsBruce Ashfield
With the updated kernel tools, we generate a list of sccs, patches, configs and BSP definitions as part of the meta data generation. It is valid if there aren't any of these artifacts found (i.e. you are just building a branch and a default config), but invoking the tools with no inputs isn't a good idea. To avoid this issue, we generate a string based on the artifacts and skip calling the tools if there's nothing to do. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-05linux-yocto/4.8: add qemuarm device tree specificationBruce Ashfield
4.7+ requires a device tree for the arm versatile family of platforms. We add the definition to our 4.8 linux-yocto recipes so we can continue to boot! Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-05linux-libc-headers: Refresh musl patches against newer kernel headers versionRichard Purdie
The musl patches need to be updated against the latest kernel verison in order to apply. No functionality changes. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-05libc-headers: update to v4.8Bruce Ashfield
Updating the libc-headers to use the 4.8 kernel as the default. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-05linux-yocto-dev: bump to v4.8+Bruce Ashfield
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-05perf: adapt to Makefile.configBruce Ashfield
commit 4842576cd857 [perf tools: Move config/Makefile into Makefile.config] relocated the configuration Makefile of perf. As such, we need to adapt our fixup routines to work with the Makefile no matter where it is. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-05linux-yocto: introduce v4.8 recipesBruce Ashfield
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-04toaster: fire TaskArtifacts eventEd Bartosh
Fire TaskArtifact MetaData event for deployment tasks when task either completed or skipped. Event contains full task id (recipe+task) and list of deployment artifacts from sstate manifest. This should allow Toaster to always get notified about deployment artifacts produced by the build. [YOCTO #9869] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-04buildtools-tarball/uninative-tarball: Fix for working with populate_sdk ↵Richard Purdie
under sstate control Firstly, these recipes are not target (MACHINE) specific so they should by SDK_ARCH based, not PACKAGE_ARCH. Also fix use of SDK_DEPLOY -> SDKDEPOLYDIR after other recent changes. Together these fixes avoid various build failures and ensure the tarballs only get built once rather than multiple times. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-04populate_sdk_ext: Put populate_sdk_ext under sstate controlRichard Purdie
Adding populate_sdk task to SSTATE_TASKS should make sstate machinery to generate manifest for deployed ext sdk artifacts and do final deployment to SDK_DEPLOY. This is done in a similar way to do_populate_sdk in a previous patch. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-04populate_sdk_base: Put populate_sdk under sstate controlEd Bartosh
Adding populate_sdk task to SSTATE_TASKS should make sstate machinery to generate manifest for deployed sdk artifacts and do final deployment to SDK_DEPLOY. Set stamp-extra-info flag for do_populate_sdk task. This flag is used in the name of sstate manifest. Setting it to predetermined value for populate_sdk task should help to get correct manifest filenames when processing runQueueTask events. The do_populate_sdk function is also executed by do_populate_sdk_ext so in order to avoid conflicts with the sstate postfuncs, split the main code into a separate function. We also need to set SDKDEPLOYDIR as do_populate_sdk_ext expects it in order not to break ESDK generation. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-04sstate: Avoid duplicate README file errors for sdk under sstate controlRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-04image.bbclass: Put image_complete under sstate controlEd Bartosh
Adding image_complete task should make sstate machinery to generate manifest for deployed images and do final deployment to DEPLOY_DIR_IMAGE. Made sure IMGDEPLOYDIR doesn't contain images from past deployments to prevent them to be included into sstate manifests. Set stamp-extra-info flag for do_image_complete task. This flag is used in the name of sstate manifest. Setting it to predetermined value for image_complete should help to get correct manifest filenames when processing runQueueTask events. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-04populate_sdk_base: Deploy images to SDKDEPLOYDIRRichard Purdie
Changed deployment directory from DEPLOY_DIR_IMAGE to SDKDEPLOYDIR to make sstate machinery to do final deployment and generate manifest. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-04image: Deploy images to IMGDEPLOYDIREd Bartosh
Changed deployment directory from DEPLOY_DIR_IMAGE to IMGDEPLOYDIR to make sstate machinery to do final deployment and generate manifest. Renamed variable deploy_dir to deploy_dir_image in selftest code to avoid confusion with DEPLOYDIR variable. Updated the code of rootfs.py:Rootfs class to use IMGDEPLOYDIR variable as it's now used as a new deployment destination. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-04image/populate_sdk_base: Add *DEPLOYDIR variablesEd Bartosh
This is a preparation for changing deployment directory for image and populate_sdk targets. Introduced new variables, IMGDEPLOYDIR and SDKDEPLOYDIR. Set it to current image/sdk deployment locations. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03arch-mips.inc: Disable QEMU usermode usage when building with n32 ABIAlexander Kanavin
QEMU usermode doesn't support n32 binaries, erroring with "Invalid ELF image for this architecture". Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03busybox: fix "sed n (flushes pattern space, terminates early)" testcase failureDengke Du
It is a busybox upstream known bug. When the busybox sed sub-command 'n' hit the files EOF, it print an extra character that have been printed, but the GNU sed would not print it. In busybox source code ../editors/sed.c ------------------------------------------------------------------------ case 'n': if (!G.be_quiet) sed_puts(pattern_space, last_gets_char); if (next_line) { free(pattern_space); pattern_space = next_line; last_gets_char = next_gets_char; next_line = get_next_line(&next_gets_char, &last_puts_char, last_gets_char); substituted = 0; linenum++; break; } /* fall through */ /* Quit. End of script, end of input. */ case 'q': /* Exit the outer while loop */ free(next_line); next_line = NULL; goto discard_commands; ------------------------------------------------------------------------ when read at the end of the file, the 'next_line' is null, it would go "case 'q'" and goto discard_commands, the discard_commands would print the old pattern space which have been printed. So in order to comply with GNU sed, in case 'n', when the next_line is null I add "else" at the end of the second "if": "goto again;" and send it to the busybox upstream, the busybox maintainer adopt it and make a little changes to the patch, we can see it at: His reply: http://lists.busybox.net/pipermail/busybox/2016-September/084613.html The new patch on busybox master branch: https://git.busybox.net/busybox/commit/?id=76d72376e0244a5cafd4880cdc623e37d86a75e4 Signed-off-by: Dengke Du <dengke.du@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03kernel.bbclass: include signing keys when copying files required for module ↵Mattias Waldo
builds The absence of signing_key.* in $kerneldir made signing of out-of-tree kernel modules fail (silently). Add copying of these files during the shared_workdir task. Signed-off-by: Mattias Waldo <mattias.waldo@saabgroup.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03oeqa/selftest Adds eSDK test cases to devtool verification.Francisco Pedraza
The covered functions are, install libraries headers and image generation binary feeds. Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03/oeqa/sdkext Adds verification for devtool on eSDK.Francisco Pedraza
The covered funcions are, build make, build esdk package, build cmake extend autotools recipe creation, kernel module, node.js installation and recipe creation. Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03scripts: ensure tinfoil is shut down correctlyPaul Eggleton
We should always shut down tinfoil when we're finished with it, either by explicitly calling the shutdown() method or by using it as a context manager ("with ..."). Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03gcc-runtime.inc: add CPP support for mips64-n32 tuneJuro Bystricky
This patch fixes the problem where the CPP compiler cannot find include files. The compiler is configured to look for the files in places that do not exist. When querying the CPP for search paths, we observe messages such as these: multilib configuration: MACHINE="qemumips64" require conf/multilib.conf MULTILIBS = "multilib:lib64 multilib:lib32" DEFAULTTUNE = "mips64-n32" DEFAULTTUNE_virtclass-multilib-lib64 = "mips64" DEFAULTTUNE_virtclass-multilib-lib32 = "mips32r2" ignoring nonexistent directory "<path>/sysroots/mips64-n32-poky-linux-gnun32/usr/include/c++/6.2.0/mips64-poky-linux/32 single lib configuration: MACHINE="qemumips64" DEFAULTTUNE = "mips64-n32" ignoring nonexistent directory "<path>/sysroots/mips64-n32-poky-linux-gnun32/usr/include/c++/6.2.0/mips64-poky-linux/ To fix this, create a symlink of the name CPP expects and point it to the corresponding "gnun32" directory. [YOCTO#10142] Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03kernel.bbclass: add user output to savedefconfigStefan Müller-Klieser
In a similar manner to diffconfig, tell the bitbake user where the defconfig will be saved to. Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03Fix out of tree builds of u-boot with gold linkerAndrew Goodbody
Need to reference config.mk file in source tree which is no longer the current directory when using out of tree builds. Signed-off-by: Andrew Goodbody <andrew.goodbody@cambrionix.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03sstate.bbclass: skip packaging if SSTATE_SKIP_CREATION is setEd Bartosh
SSTATE_SKIP_CREATION variable will be used to skip creation of sstate .tgz files. It makes sense for image creation tasks as tarring images and keeping them in sstate would consume a lot of disk space. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03initscripts: Start devpts at 06 instead of 38Mike Looijmans
For example bootlogd needs devpts to be running, but bootlogd starts at 07. Starting bootlogd early makes perfect sense, so the best option here is to move devpts up to 06 to prevent this error message at boot: cannot allocate pseudo tty: No such file or directory Systems that have CONFIG_LEGACY_PTYS in the kernel will not see this message. Since it is called "LEGACY" for a reason, fixing this in userspace appears to be the better option here. The devpts script does not need anything except a mounted "/dev" which has been arranged in "S02sysfs.sh" already. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03lighttpd: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03xhost: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03xauth: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03wget: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES instead of unconditionally enabled. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03rsync: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03rsync: use rsync.inc to avoid duplicated codesJackie Huang
There are two versions of rsync but the rsync.inc is only used by 3.x, there are duplicated codes in 2.x, so this commit include changes: * remove duplicated codes in 2.x and require the inc * move the LICENSE from inc to each bb Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03pulseaudio: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03psmisc: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03nspr: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03nfs-utils: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03libxmu: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03libxml2: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03libxfont: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03libsm: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03libpcap: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03libice: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03apr: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03scripts/contrib: update scripts for changes to internal APIPaul Eggleton
The multiconfig changes altered some of the functions being called here, so update the calls. Make use of the new Tinfoil.parse_recipe_file() function to make parsing easier. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03base-files: Add shell test quotingJussi Kukkonen
tty can return "not a tt" which results in warnings when /etc/profile is executed. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-26 14:26:26 +0000