aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2019-01-11busybox: Enable mountpoint and setsid appletsKhem Raj
This is needed by some init system services and if init system is not sysvinit then we dont have it, therefore its useful to have it provided via busybox as a backup Enable CONFIG_SETSID to get setsid, needed by runit Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-11initramfs-boot: create /dev/consoleJacob Kroon
The Yocto kernel expects a proper /dev/console to exist before running init, otherwise booting will fail with the message: Kernel panic - not syncing: /dev/console is missing or not a character device! Please ensure your rootfs is properly configured Add similar fix as was done for initramfs-framework and initramfs-live-boot in commits 0352841cd92f6316bcac092e2fff9d28c352b36b 1b64664f0c388f41084f5db6e46e3e68c53fb6d9 Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-11buildhistory: simplify buildhistory_list_files()Jacob Kroon
Avoid duplicating shell code for the two cases, fakeroot/non-fakeroot. Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-11python3-pbr:Upgrade to 5.1.1Hong Liu
Upgrade python3-pbr from 4.2.0 to 5.1.1. Signed-off-by: Hong Liu <hongl.fnst@cn.fujitsu.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-11package.bbclass: Do not hide cpio's errorRobert Yang
We use subprocess.check_output() to run the command, which means that we need care about the error, so the 2>/dev/null should not be used, otherwise it is hard to debug when the error happens. I guess it was copied from previous lines, but that command's error can be ignored (excpet: pass): try: subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT) except subprocess.CalledProcessError: # Can "fail" if internal headers/transient sources are attempted pass But we don't do this in the current location, so remove "2>/dev/null" Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2019-01-11at-spi2: fix dbus-daemon pathJed
"dbus_daemon" is supposed to be set to the full dbus-daemon file path, not just its directory. Signed-off-by: Jed <jed.openxt@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-11mdadm: fix gcc-8 format-truncation warningHongxu Jia
While compiling with `-Werror=format-truncation=', it failed [snip] |super0.c:236:32: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=] | snprintf(nb, sizeof(nb), "%4d", d); | ^ |super0.c:236:3: note: 'snprintf' output between 5 and 12 bytes into a destination of size 11 | snprintf(nb, sizeof(nb), "%4d", d); [snip] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-11uboot-sign.bbclass: silence warnings when UBOOT_DTB_BINARY is emptyAlex Kiernan
When UBOOT_DTB_BINARY is set to "", the keys for signed booting are expected to be already present in U-Boot's DTB, so don't issue warnings for this. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-11distro_features_check.bbclass: show all error info at one timeKai Kang
In distro_features_check.bbclass it checks whether items in REQUIRED_DISTRO_FEATURES and CONFLICT_DISTRO_FEATURES exist in DISTRO_FEATURES. But it only shows one required or conflict distro feature when error occurs. Update to show them all at one time. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-11json-glib: upgrade 1.4.2 -> 1.4.4Yi Zhao
Add PACKAGECONFIG[manpages] for generating man pages. Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11logrotate: upgrade 3.14.0 -> 3.15.0Yi Zhao
Refresh patches: act-as-mv-when-rotate.patch disable-check-different-filesystems.patch Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11gnu-efi: upgrade 3.0.8 -> 3.0.9Yi Zhao
Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11wget: upgrade 1.19.5 -> 1.20.1Yi Zhao
Drop 0001-Unset-need_charset_alias-when-building-for-musl.patch as it had been fixed upstream. Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11libsdl2: upgrade 2.0.8 -> 2.0.9Yi Zhao
Drop 0001-GLES2-Get-sin-cos-out-of-vertex-shader.patch as it had been merged upstream. Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11libcap: upgrade 2.25 -> 2.26Yi Zhao
Drop 0001-Fix-build-with-gperf-3.1.patch as it had been fixed upstream. Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11file: upgrade 5.34 -> 5.35Yi Zhao
License-Update: remove trailing whitespace from COPYING Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11ltp: update HOMEPAGEYi Zhao
The project pages and wiki has been moved to GitHub. Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11libcheck: update HOMEPAGEYi Zhao
The project has been moved to GitHub. Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11package.bbclass: Sort FILES_INFO by keyJacob Kroon
Observing depsig.do_package for a package inbetween rebuilds indicated that FILES_INFO was changing content order randomly. Force it to be deterministic by sorting with respect to the keys when serializing. Suggested-by: Joshua Watt <jpewhacker@gmail.com> Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11linux-libc-headers_4.19.bb: Backport patch to fix clockid_t in UAPIKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11linux-libc-headers: Remove spurious x.mbox fileKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11musl: Update to master tipKhem Raj
Detaild log https://git.musl-libc.org/cgit/musl/log/?qt=range&q=21a172dd36cae7a08492fd3a7500d7bf0daee13e..de7dc1318f493184b20f7661bc12b1829b957b67 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11meta/classes: adjust perl-related classes to the new recipesAlexander Kanavin
This mostly means tweaking the paths to match upstream defaults. get_perl_arch() functions are taken from the patch by Jens Rehsack: http://lists.openembedded.org/pipermail/openembedded-core/2018-November/276546.html Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
2019-01-11perl: remove the previous version of the recipeAlexander Kanavin
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
2019-01-11perl: add a version that builds the recipe using perl-cross, and update to ↵Alexander Kanavin
5.28.1 perl-cross is a build system overlay from buildroot project that aims to bring a bit of sanity to cross-building perl. The advantage of using that is that we can drop a lot of custom patches (that no one really understands), and simplify the perl recipe as well. Also the build time goes down from several minutes to about 30 seconds. The whole thing becomes maintainable again, in my opinion. When rewriting the recipe I had two goals in mind: 1. Stay with upstream defaults as much as possible 2. Add custom patches only when their necessity was proven through testing. http://arsv.github.io/perl-cross/ Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
2019-01-11openssh: use tarballs instead of gitAlexander Kanavin
This was change to git recently to obtain openssl 1.1 compatible pre-release code (before 7.9 was out), however tarballs are preferred, and with them upstream version checks work (openssh uses a weird git tag scheme). Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11selftest/distrodata: un-break the upstream version check testAlexander Kanavin
And fix the reported upstream check failures. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-08bitbake.conf: add --enable-new-dtags to linkerAlexander Kanavin
Various versions of ld have different defaults for this (even between e.g. Ubuntu 16.04 and 18.04). This has the consequence of putting either RPATH or RUNPATH into the binary, depending on the linker, which have different priorities vs LD_LIBRARY_PATH env var. Also, I think, the original executable binary is looked up for the tags when resolving a dependency of a shared library when using RPATH, but not RUNPATH. Let's make this deterministic. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-08patch: reproducibility: Fix host umask leakageDouglas Royds
Some patch files create entirely new files, so their permissions are subject to the host umask. If such a file is later installed into a package with no change in permissions, it breaks the reproducibility of the package. This was observed on libpam, for instance: The patch file pam-security-abstract-securetty-handling.patch creates a new file (tty_secure.c). This file is later copied into the -dbg package with no change in permissions. Signed-off-by: Douglas Royds <douglas.royds@taitradio.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-08libpcap: upgrade 1.8.1 -> 1.9.0Anuj Mittal
* For changes, see: https://www.tcpdump.org/libpcap-changes.txt * Merge inc and bb and remove unnecessary flags. * Remove all patches, they have either been upstreamed or fixed differently. * Compilation with bluez5 works just fine, enable it and remove bluez4 config. * Backport a commit to fix musl builds. Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-08at-spi2-atk: upgrade 2.26.2 -> 2.30.0Anuj Mittal
For changes, see: https://github.com/GNOME/at-spi2-atk/blob/AT_SPI2_ATK_2_30_0/NEWS Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-08atk: upgrade 2.28.1 -> 2.30.0Anuj Mittal
* For changes, see: https://github.com/GNOME/atk/blob/ATK_2_30_0/NEWS * Change in doc and introspection switches and patch refresh. Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-08libjpeg-turbo: upgrade 2.0.0 -> 2.0.1Anuj Mittal
* For changes, see: https://github.com/libjpeg-turbo/libjpeg-turbo/blob/master/ChangeLog.md * Removed upstreamed patch Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-08libsolv: upgrade 0.7.1 -> 0.7.2Anuj Mittal
>From NEWS: - bug fixes: * do not autouninstall packages because of forcebest updates - new features: * support rpm's new '^' version separator * support set/get_considered_list in bindings * new experimental SOLVER_FLAG_ONLY_NAMESPACE_RECOMMENDED flag Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-08netbase/base-files: move /etc/hosts from netbase to base-filesChen Qi
Move /etc/hosts to base-files, and also add entry to it according to hostname setting. This fixes the problem of commands like `hostname -f' failing due to lack of such entry. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-07oeqa/sdk: add test to exercise MesonRoss Burton
(From OE-Core rev: 29359493e391d68a5a6b4fa4d09ffdc1fe6db620) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-07oeqa/sdk/assimp: cleanupRoss Burton
Unify style with the other tests. Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-07oeqa/sdk/cases: clean up DL_DIR handlingRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-07meson: write correct host endian into SDK cross fileRoss Burton
Meson doesn't ignore this but will emit a warning, so write the correct value. Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-07meson: fix nativesdk-meson for multilib SDKsRoss Burton
Multilib SDKs differ only in the environment variables set, so nativesdk-meson's setup script needs to write a cross file for each environment. Rename the shipped meson.cross to meson.cross.template, as it cannot be used directly. Now that post-relocate scripts are called once for each environment, the generated meson.cross can be prefixed with TARGET_PREFIX to ensure it is unique. Finally rewrite the setup script to use string.Template to perform the expansion instead of hand-coding the logic. Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-07meson: use a sensible default for libdir when cross-compilingRoss Burton
If --libdir isn't passed to Meson a default is used, but as this default value changes depending on the host (whether it is Debian-like, or has /usr/lib64) this isn't appropriate for cross builds. Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-07toolchain-scripts: run post-relocate scripts for every environmentRoss Burton
SDKs for multilib configurations have multiple environment scripts, so re-arrange the post-relocate hook invocation so that it runs the post-relocate hooks after sourcing each environment script. Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-07gtk+3: add PACKAGECONFIG for cupsDiego Rondini
Signed-off-by: Diego Rondini <diego.rondini@kynetics.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-07libsndfile1: Security fix CVE-2017-17456/17457 CVE-2018-19661/19662Changqing Li
fix 4 CVEs, which is backport from https://github.com/erikd/libsndfile/commit/585cc28a93be27d6938f276af0011401b9f7c0ca Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-07fts: Bump FTS to version 1.2.7Alistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-07scripts/oe-git-archive: fix non-existent key referencing errorYeoh Ee Peng
Without installing gitpython package, oe-git-archive will face error below, where it was referencing key that was non-existent inside metadata object. Traceback (most recent call last): File "<poky_dir>/scripts/oe-git-archive", line 271, in <module> sys.exit(main()) File "<poky_dir>/scripts/oe-git-archive", line 229, in main 'commit_count': metadata['layers']['meta']['commit_count'], KeyError: 'commit_count' Fix this error by adding exception catch when referencing non-existent key (based on inputs provided by Richard Purdie). [YOCTO# 13082] Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-07swig: Fix configure failureAlistair Francis
Fix the swig build failure by calling the default do_configure from autotools. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-07buildoptions.py: use different STAMPS_DIR and SSTATE_DIRChen Qi
Use a different STAMPS_DIR and SSTATE_DIR in test_yocto_source_mirror. Otherwise, when executing `oe-selftest -a', we will get a lot of failures due to do_unpack failure. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-07oeqa/selftest/runqemu: Enable kvm when QEMU_USE_KVM is setRobert Yang
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-07oeqa/manual/bsp-qemu.json: Update for QEMU_USE_KVMRobert Yang
Now QEMU_USE_KVM can only be boolean, can not contain MACHINE any more. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-28 17:44:03 +0000