aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2016-08-18kbd: remove PARALLEL_MAKEINST = ""rbt/kbdRobert Yang
There isn't anything wrong when looked into its Makefile, I guess that it had been fixed during ugprade, and I've applied this patch locally for more than 2 months, there isn't anything wrong. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-08-18systemd-compat-units: Only enable for systemd in DISTRO_FEATURESRichard Purdie
This recipe only makes sense when systemd is enabled and otherwise causes world build failures. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-18systemd-compat-units: pkg_postinst() does not workJoe Slater
The test for various files is wrong and will always be true, even if init.d does not exist. Exit if init.d does not exist, and correctly test for file existence otherwise. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-18sanity: Require bitbake 1.31.1 for multi-config changesRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-18devtool/recipetool/meta: Adapt to bitbake API changes for ↵Richard Purdie
multi-configuration builds Unfortunately to implenent multiconfig support in bitbake some APIs had to change. This updates code in OE to match the changes in bitbake. Its mostly periperhal changes around devtool/recipetool [Will need a bitbake version requirement bump which I'll make when merging] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-18parselogs: Ignore amb_nb warning messages under qemux86*Richard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-18parselogs.py: Add failed to setup card detect gpio error on x86California Sullivan
This error has occurred on the MinnowBoard Max and Turbot since its inception. It supposedly indicates a non-working SD card reader, but ours works fine. Whitelist the error. Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-18parselogs.py: Add dmi and ioremap errors to ignore list for core2California Sullivan
These errors have been occuring since the introduction of the 4.4 kernel with no apparent functionality loss. Whitelist for now. Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-18parselogs.py: Ignore Skylake graphics firmware load errors on genericx86-64California Sullivan
These errors can't be fixed without adding the firmware to the initramfs and building it into the kernel, which we don't want to do for genericx86-64. Since graphics still work acceptably without the firmware blobs, just ignore the errors for that MACHINE. Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-18testimage: allow using kvm when running qemux86* machinesBill Randle
Using kvm can provide significant speedups when running qemux86* machines on an x86* host. Enabled by using the new QEMU_USE_KVM variable. [YOCTO #9298] Signed-off-by: Bill Randle <william.c.randle@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-18image.bbclass: rename COMPRESS(ION) to CONVERSIONPatrick Ohly
With the enhanced functionality, the term "compression" is no longer accurate, because the mechanism also gets used for conversion operations that do not actually compress data. It is possible to remove this naming problem in a backward-compatible manner by including COMPRESSIONTYPES in CONVERSIONTYPES and checking for the old COMPRESS_CMD/DEPENDS as fallbacks. [YOCTO #9346] Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-18grub: split grub-editenv into it's own packageAlejandro del Castillo
grub-editenv edits the env block at runtime on a booted system. Other tools can depend on it to configure a live system, for ex. to set next boot mode upon reboot. By splitting grub-editenv, tools don't have to depend on the entire grub package (grub-editenv just edits one file). Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com> Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-18bash: 4.3.39 -> 4.3.46Dengke Du
Signed-off-by: Dengke Du <dengke.du@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-18openssh: add ed25519 host key location to read-only sshd configAndré Draszik
It's simply been missing. Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-18connman: add missing space in _appendAndré Draszik
We do that everywhere else, and otherwise anybody extending SRC_URI through bbappend must know to add a space at the end, which is an unusual requirement. Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-18kernel-yocto: streamline patch, configuration and audit phasesBruce Ashfield
We've been running with a set of kern-tools that were designed to work with build systems that knew nothing about git, trees, commits, etc. As such, there's been a set of shims/wrappers in place to work with within bitbake/oe-core. These were the *me scripts: createme, updateme, patchme and configme. With this commit, we strip that legacy code and use the tools directly. This means less complexity, fewer corner cases .. and no surprises when the tools are arunning. As another benefit, the tools consume much less time during a typical build and have no noticeable impact on the overall build time. Existing .scc files, features, and processing are not impacted as these tools are compatible with existing feature descriptions and kerne configuration fragments. The audit of kernel configuration fragments is now detached from the linux-yocto build structure and process. This means that they can eventually be tweaked to offer kernel audit to any type of kernel build and configuration process. Additionally, the kernel symbol audit phase can now resolve symbol dependencies and offer guidance when a symbol is missing: WARNING: linux-yocto-4.4.15+gitAUTOINC+b030d96c7b_f5e2c49d58-r0 do_kernel_configcheck: [kernel config]: specified values did not make it into the kernel's final configuration: ---------- CONFIG_BT_6LOWPAN ----------------- Config: CONFIG_BT_6LOWPAN From: /home/bruce/poky/build/tmp/work-shared/qemux86-64/kernel-source/.kernel-meta/configs/standard/features/bluetooth/bluetooth.cfg Requested value: CONFIG_BT_6LOWPAN=y Actual value: Config 'BT_6LOWPAN' has the following conditionals: BT_LE && 6LOWPAN (value: "n") Dependency values are: BT_LE [y] 6LOWPAN [n] Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-18linux-yocto/4.4: -rt update patch meta-data to remove ()Bruce Ashfield
The existing kernel patching scripts don't like () in patch names, since they are detected as function calls. Although the scripts will be updated to avoid this error, it is worthwhile fixing the patch names in the meantime. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-18linux-yocto/4.1: config updatesBruce Ashfield
Integrating the following configuration changes: features: usb-net: provide more coverage on USB network devices features: broxton: enable iTCO watchdog support features: broxton: enable iSMT support features: broxton: enable LPC bridge function for Intel ICH and SCH Signed-off-by: Bruce Ashfield <bruce@zedd.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-18linux-yocto/4.1: bump to v4.1.29Bruce Ashfield
Integrating the korg 4.1.29 -stable release Signed-off-by: Bruce Ashfield <bruce@zedd.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-18linux-yocto/4.1: netfilter: x_tables: fix stable backportBruce Ashfield
There was an issue with a netfilter backport in 4.1.28-stable. To address it, we backport the -stable fix: netfilter: x_tables: fix stable backport Stable-4.1 backport of mainline commit 364723410175 ("netfilter: x_tables: validate targets of jumps") doesn't handle correctly the fact that 4.1 kernel is missing commit 482cfc318559 ("netfilter: xtables: avoid percpu ruleset duplication") so that t->entries is still a per-cpu array in find_jump_target(). Use the same fix as e.g. stable-3.14 backport. Fixes: 8163327a3a92 ("netfilter: x_tables: validate targets of jumps") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-18dbus: 1.10.8 -> 1.10.10Dai Caiyun
Upgrade dbus from 1.10.8 to 1.10.10. Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-18busybox: Backport makefile fix from upstreamRichard Purdie
This at least partially addresses one of the build races we've seen on the autobuilder in busybox. Its a straightforward backport from upstream. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-18gobject-introspection: Ensure prelink config file exists to avoid build failuresRichard Purdie
gobject-introspection relies upon prelink-rtld. In order to function correctly, we generate an ld.so.conf file which is generated before users of prelink-rtld are called. There is currently a race in gobject-introspection since the configuration file may not have been created. This adds in code to ensure that regardless of codepath (new build, existing build, from sstate), we trigger the creation of the configuration file and avoid build failures. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-18alsa-utils: 1.1.1 -> 1.1.2Tanu Kaskinen
Changelog: http://www.alsa-project.org/main/index.php/Changes_v1.1.1_v1.1.2 The FFT code in alsabat changed from double precision to single precision floating point numbers, which is why the fftw dependency changed to fftwf. Signed-off-by: Tanu Kaskinen <tanuk@iki.fi> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-18alsa-lib: 1.1.1 -> 1.1.2Tanu Kaskinen
Changelog: http://www.alsa-project.org/main/index.php/Changes_v1.1.1_v1.1.2 Removed upstreamed patch: 0001-pcm_plugin-fix-appl-pointer-not-correct-when-mmap_co.patch Rebased avoid-including-sys-poll.h-directly.patch Signed-off-by: Tanu Kaskinen <tanuk@iki.fi> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-17oeqa.buildperf: use oe.path.remove()Markus Lehtonen
Drop the self-baked force_rm() method. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17oeqa.buildperf: be more verbose about failed commandsMarkus Lehtonen
Log failures of commands whose output is stored. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17oe-build-perf-test: simplify stderr log formatMarkus Lehtonen
Remove timestamps from the stderr log in order to make the console output more readable, i.e. more in line with the output from unittest runner. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17oe-build-perf-test: set-up file logging as early as possibleMarkus Lehtonen
So that the log file would not miss any records. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17oe-build-perf-test: suppress logger output when tests are being runMarkus Lehtonen
Prevent logger from writing to stderr when the tests are being run by the TestRunner. During this time the logger output is only written to the log file. This way the console output from the script is cleaner and not mixed with possible logger records. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17oeqa.buildperf: introduce runCmd2()Markus Lehtonen
Special runCmd() for build perf tests which doesn't raise an AssertionError when the command fails. This causes command failures to be detected as test errors instead of test failures. This way "failed" state of tests is reserved for future making it possible to set e.g. thresholds for certain measurement results. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17oe-build-perf-test: use new unittest based frameworkMarkus Lehtonen
Convert scripts/oe-build-perf-test to be compatible with the new Python unittest based buildperf test framework. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17oeqa.buildperf: convert test cases to unittestMarkus Lehtonen
This commit converts the actual tests to be compatible with the new Python unittest based framework. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17oeqa.buildperf: add BuildPerfTestResult classMarkus Lehtonen
The new class is derived from unittest.TextTestResult class. It is actually implemented by modifying the old BuildPerfTestRunner class which, in turn, is replaced by a totally new simple implementation derived from unittest.TestRunner. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17oeqa.buildperf: add BuildPerfTestLoader classMarkus Lehtonen
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17oeqa.buildperf: derive BuildPerfTestCase class from unitest.TestCaseMarkus Lehtonen
Rename BuildPerfTest to BuildPerfTestCase and convert it to be derived from TestCase class from the unittest framework of the Python standard library. This doesn't work with our existing testcases or test runner class and these need to be modified, too. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17oeqa.buildperf: rename module containing basic testsMarkus Lehtonen
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17buildperf: Add support for times without decimal partJose Perez Carranza
Add logic for the cases when the time retrieved does not have decimal part. Signed-off-by: Jose Perez Carranza <jose.perez.carranza@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17lib/oeqa/selftest/bbtests: don't report expected failuresRoss Burton
Another instance where expected failures need to be not reported to the error reporting service. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17oeqa/runtime/syslog.py: Improve test_syslog_logger on systemdAníbal Limón
When an image uses systemd journald acts as a main syslog daemon using /dev/log. The test_syslog_logger try to log a predifined message into the syslog using logger and then search using grep in /var/log/messages if this fails for some reason (file rotated) now search the predifined message into the journal. Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17python3.5-manifest: Fixes several dependencies on the newest python3Alejandro Hernandez
This patch adds the following packages: python3-enum (needed by python3-git), python3-selectors (needed by python3-subprocess), python3-signal (needed by python3-subprocess), and it also fixes the following ones with missing dependencies: python3-subprocess, python3-compression, python3-datetime [YOCTO #10127] [YOCTO #10124] [YOCTO #10122] Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17ncurses: upgrade to 6.0+20160625Hongxu Jia
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17gnupg: upgrade to 2.1.14Hongxu Jia
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17man-pages: upgrade to 4.07Hongxu Jia
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17python3-git: Fixes dependencies, avoiding to install python3-miscAlejandro Hernandez
This patch adds the following dependencies to be able to import git on python3: python3-enum, python3-logging, python3-datetime, python3-netclient. [YOCTO #9757] Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17python3-gitdb: Fixes zlib missing dependencyAlejandro Hernandez
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17gmp: Fix wrong detection of -march flagKhem Raj
Configure detects -march flag based upon target triplet, it wrongly passes -march=armv4 for all arm, this is unearthed when compiling with clang since it errors out with flags like /tmp/kraj01/a-0c2038.s:27: Error: selected processor does not support `bx r0' in ARM mode since it does not pass --fix-v4bx along with -march=armv4, which does not happen with gcc toolchain since this flag is passed impicitly hence this error was indetected Fixed thusly Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17graph-tool: update to new networkx API, be iterativeRoss Burton
Update the dot parser to the new networkx API (using pydotplus to parse). Also, switch the path display to output the paths as they are found instead of collecting them into a list, so output appears sooner. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17python-3.5-manifest: Add some missing RDEPENDSKyle Russell
ctype's util.py needs subprocess lang's inspect.py needs importlib.machinery math's random.py needs crypt's hashlib subprocess imports threading Signed-off-by: Kyle Russell <bkylerussell@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-17libpng: update 1.6.23 -> 1.6.24Maxin B. John
Updates in License files are due to changes in Copyright date and Version. Ensure all tools are packaged into $PN-tools. Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>