aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2016-11-08qemuarm64.conf: make runqemu's graphic workrbt/arm64Robert Yang
Fixed: $ runqemu qemuarm64 (without nographic) There is no output in qemu console without this fix. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-11-07devtool: add "rename" subcommandPaul Eggleton
When you run devtool add on a source tree we attempt to figure out the correct name and version for the recipe. However, despite our best efforts, sometimes the name and/or version we come up with isn't correct, and the only way to remedy that up until now was to reset the recipe, delete the source tree and start again, specifying the name this time. To avoid this slightly painful procedure, add a "rename" subcommand that lets you rename the recipe and/or change the version. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-07oe-selftest: devtool: fix error message in _test_recipe_contents()Paul Eggleton
If a variable is being set in the recipe when we've explicitly passed None as the value to _test_recipe_contents() indicating that it shouldn't be set at all, then we should be printing out the variable name in the assertion message but it seems like I forgot to do a substitution. Also include the value for informational purposes. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-07recipetool: create: separate LICENSE items with & by defaultPaul Eggleton
recipetool sets the LICENSE value based on licenses detected from the source tree. If there are multiple licenses then they were being separated by spaces, but this isn't actually legal formatting and if you're using "devtool add" you get a warning printed when devtool parses the recipe internally. Earlier I had made a conscious decision to do it this way since it's up to the user to figure out whether the multiple licenses should all apply (in which case they'd be separated with &) or if there is a choice of license (in which case | is the correct separator). However, I've come to the conclusion that we can just default to & and then the ugly warning goes away, and it's the safest alternative of the two (and most likely to be correct, since it's more common to have a codebase which is made up of code with different licenses, i.e. all of them apply to the combined work). I've tweaked the comment that we add to the recipe to explicitly state that we've used & and that the user needs to change that if that's not accurate. Fixes [YOCTO #10413]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-07devtool: finish: warn if moving recipe to unconfigured destination layerPaul Eggleton
If you run devtool finish to move a recipe created in the workspace by devtool add or devtool upgrade to a layer, and that layer is not currently included in bblayers.conf (perhaps unintentionally), then the recipe will no longer be visible to bitbake. In this scenario, show a warning so that the user isn't surprised by the recipe "going missing". Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-07devtool: finish: fix error if destination layer is not in bblayers.confPaul Eggleton
If devtool finish is run on a recipe where the recipe file itself is in the workspace (e.g. where devtool add / devtool upgrade has been used) and the specified destination layer is not in bblayers.conf, then we need to avoid running bitbake -c clean at the end because the recipe has been moved, but the bbappend is still present in the workspace layer at that point and so if we do it will fail due to the dangling bbappend. It's difficult to do the clean at the point we'd want to because tinfoil is holding bitbake.lock for most of the time, but in any case cleaning the recipe is less important than it used to be since we started managing the sysroot contents more strictly, so just disable cleaning under these circumstances to avoid the problem. Fixes [YOCTO #10484]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-07devtool: add: show recipetool create outputPaul Eggleton
When running devtool add, instead of hiding the recipetool create output, change it so that it's appropriate to show in the devtool context and show it in real-time. This means that you get status output such as when a URL is being fetched (though currently no progress information.) recipetool create now has a hidden --devtool option to enable this display mode. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06distro_check: partial rewrite to make it work againRoss Burton
This library suffered as part of the Python 2 to Python 3 migration and stopped working entirely. Fix all the migration problems such as files being treated as strings but opened in binary mode, insufficient use of with on files, and so on. Rewrite large amounts to be Pythonic instead of C-in-Python. Update OpenSuse and Fedora URLs. Fedora now splits the archive alphabetically so handle that. [ YOCTO #10562 ] Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06gdb: update 7.11+git1a982b689c -> 7.11.1Andre McCurdy
41d8236 Set GDB version number to 7.11.1. 136613e Fix PR gdb/19828: gdb -p <process from a container>: internal error a0de87e Make gdb/linux-nat.c consider a waitstatus pending on the infrun side cf2cd51 Add mi-threads-interrupt.exp test (PR 20039) f0a8d0d Fix double prompt output after run control MI commands with mi-async on (PR 20045) b5f0db4 Fix -exec-run not running asynchronously with mi-async on (PR gdb/18077) 7f8e34d Use target_terminal_ours_for_output in MI Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06wic: call os.ftruncate instead of running truncateEd Bartosh
Replaced running of truncate utility with the standard library call os.ftruncate Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06populate_sdk_base.bbclass: add documentation packages to SDKs if ↵Alexander Kanavin
api-documentation is in DISTRO_FEATURES Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06lib/oe/recipeutils: print just filename in bbappend_recipe() if in temp dirPaul Eggleton
If you use devtool update-recipe with the --append option, and a "local" (in oe-local-files) has been modified we copy it into the specified destination layer. With the way the devtool update-recipe code works now the source is always a temp directory, and printing paths from within that is just confusing, so if the path starts with the temp directory then just print the file name alone. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06db: remove pointless documentationRoss Burton
db-doc has an installed footprint of 94MB, but 60MB of that is the documentation for the Java and C# bindings which are not part of this recipe. Remove them and the for-print PDF manuals to massively reduce the footprint of db-doc. Also improve the fix for the documentation install path, and put the documentation under ${docdir}/db instead of just ${docdir} (which is /usr/share/doc by default). Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06libsamplerate0: clean up dependenciesTanu Kaskinen
The flac dependency was completely bogus. Flac isn't used at all. FFTW is only used by tests, so we don't need to provide a packageconfig for that. ALSA is only used by example code that isn't part of the packaged files, so even if ALSA is enabled, it doesn't affect the build result. Nevertheless, I prefer to disable it explicitly to be extra sure. --disable-alsa resulted in a warning about an unsupported configure option, although by some magic it seemed to actually work as expected. A patch is added to get rid of that warning. Signed-off-by: Tanu Kaskinen <tanuk@iki.fi> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06libsamplerate0: 0.1.8 -> 0.1.9Tanu Kaskinen
The license has changed to BSD as explained here: http://www.mega-nerd.com/SRC/license.html Signed-off-by: Tanu Kaskinen <tanuk@iki.fi> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06task-time: Add simple buildstats analysis scriptUlf Magnusson
The 'task-time' Python script is used for simple manual analysis of buildstats. It displays task timing information in the same format (and using the same calculation) as the Bash 'time' builtin, and can optionally sort tasks by real (wall-clock), user (user space CPU), or sys (kernel CPU) time used. The timing information comes from the getrusage(2) fields added by commit adfdca4df18f ("buildstats: Improve to add getrusage data and corrected IO stats"). That commit is required for the script to work. Example 1: Running 'task-time' on a specific task buildstat: $ task-time ./20161005235448/gettext-0.16.1-r6/do_compile ./20161005235448/gettext-0.16.1-r6/do_compile: real 0m54.560s user 0m46.028s sys 0m2.772s Example 2: Running 'task-time' on a directory, sorting on wall-clock time: $ task-time tmp/buildstats/20161018083535 --sort real tmp/buildstats/20161018083535/bash-4.3.30-r0/do_fetch: real 10m59.140s user 0m1.152s sys 0m0.320s tmp/buildstats/20161018083535/readline-native-6.3-r0/do_fetch: real 8m57.310s user 0m0.860s sys 0m0.288s tmp/buildstats/20161018083535/perl-5.22.1-r0/do_compile: real 4m28.840s user 4m1.348s sys 0m15.816s ... Example 3: Running 'task-time' on all do_compile buildstats for a particular build by using shell globbing, sorting on user space CPU time: $ task-time tmp/buildstats/20161018083535/*/do_compile --sort user tmp/buildstats/20161018083535/qemu-native-2.7.0-r1/do_compile: real 0m49.570s user 21m45.236s sys 1m44.380s tmp/buildstats/20161018083535/linux-yocto-4.8+gitAUTOINC+03bf3dd731_67813e7efa-r0/do_compile: real 0m49.530s user 21m39.588s sys 1m59.576s tmp/buildstats/20161018083535/gcc-cross-i586-6.2.0-r0/do_compile: real 1m8.130s user 15m54.256s sys 1m28.776s ... Example 4: Comparing a task between two builds: $ task-time 201610052{25856,35448}/gettext-0*/do_compile --sort real 20161005235448/gettext-0.16.1-r6/do_compile: real 0m54.560s user 0m46.028s sys 0m2.772s 20161005225856/gettext-0.19.8.1-r0/do_compile: real 0m41.520s user 2m17.312s sys 0m7.536s Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06classes/license: copy licenses even if there are no checksummed filesRoss Burton
Previously do_populate_lic would bail writing the license files (such as the MIT license text) to deploy/licenses/${PN}/ if there were no files listed in LIC_FILES_CHKSUM. In general this isn't a problem since LIC_FILES_CHKSUM was effectively a required field, and for packages which don't have traditional content was generally set to a separate license such as ${COREBASE}/meta/COPYING.MIT. However LIC_FILES_CHKSUM is now only required if there are sources in SRC_URI, so oe-core b18fa5f removed these now redundant values. The unexpected side effect of this is that that recipes that generate their content (such as os-release) or are otherwise "interesting" (such as perf) don't have their license files copied over, resulting in warnings from do_rootfs. Resolve this by not returning early if LIC_FILES_CHKSUM is empty, and always copy the references license files. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06guilt: removeRoss Burton
This was used by the kernel tooling but has since been replaced by kgit-s2q. As there are no other users in oe-core, and this was just a native recipe, remove it. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06subversion: fix "svnadmin create" fail on x86Dengke Du
When run the following command on x86: svnadmin create /var/test_repo It cause segmentation fault error like the following: [16499.751837] svnadmin[21117]: segfault at 83 ip 00000000f74bf7f6 sp 00000000ffdd9b34 error 4 in libc-2.24.so[f7441000+1af000] Segmentation fault (core dumped) This is because in source code ./subversion/libsvn_fs_fs/low_level.c, function svn_fs_fs__unparse_footer, when: target arch: x86 apr_off_t: 4 bytes if the "APR_OFF_T_FMT" is "lld", it still use type "apr_off_t" to pass data to apr, but in apr source code file apr_snprintf.c the function apr_vformatter meet "lld", it would use the: i_quad = va_arg(ap, apr_int64_t); It uses the apr_int64_t to deal data, it read 8 bytes, so the follow-up data may be error. Signed-off-by: Dengke Du <dengke.du@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06classes/populate_sdk_ext: require uninativePaul Eggleton
It seems that possibly due to OE-Core commit ac59063bee0e32d0737340974f657341717a6abe, binaries produced without uninative aren't compatible with the uninative glibc. I did try earlier to ensure that the eSDK could work without uninative since the default configuration in OE-Core does not enable it, but it seems like I didn't go far enough. Given the practical considerations, just give up and require uninative to be enabled in order to build the eSDK. I'm not particularly happy about this, but I don't seem much of an alternative. Fixes [YOCTO #10566]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06classes/populate_sdk_ext: prevent invalid TEMPLATECONF entering eSDKPaul Eggleton
If you are using a repository which contains a .templateconf file that sets TEMPLATECONF to point into a layer it contains, but you aren't using that layer in your bblayers.conf, the eSDK would produce an error during the preparation step of the installation. An example would be using the poky repository but setting DISTRO to your own custom distro and removing meta-poky from your bblayers.conf. The eSDK doesn't support creating new build directories, so we don't care about the templates and can thus force a known good value to prevent this from happening. Fixes [YOCTO #10568]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06oe-setup-builddir: fix TEMPLATECONF error messagePaul Eggleton
This directory shouldn't contain local.conf and bblayers.conf - just templates for them; except it doesn't have to contain those, it just has to exist to pass this test. Change the error message accordingly, and mention TEMPLATECONF so that the user has at least some context. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06libxrandr: Update to version 1.5.1Fabio Berton
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06clutter-gst-3.0: Update to version 3.0.20Fabio Berton
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06clutter-gtk-1.0: Update to version 1.8.2Fabio Berton
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06autogen-native: Update to version 5.18.12Fabio Berton
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06texinfo.bbclass: use dummy dep for libtool-crossChristopher Larson
The class clearly intends build tools to depend upon the dummy texinfo, but it does so using the class-cross override for cross recipes, and libtool-cross doesn't inherit cross. Add a special case to cover this. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06runqemu: add user mode (SLIRP) support to x86 QEMU targetsTodor Minchev
Using 'slirp' as a command line option to runqemu will start QEMU with user mode networking instead of creating tun/tap devices. SLIRP does not require root access. By default port 2222 on the host will be mapped to port 22 in the guest. The default port mapping can be overwritten with the QB_SLIRP_OPT variable e.g. QB_SLIRP_OPT = "-net nic,model=e1000 -net user,hostfwd=tcp::2222-:22" Signed-off-by: Todor Minchev <todor.minchev@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06bash_3.2.x: update recipe version to match what we're shippingAndré Draszik
Make sure the recipe version matches what we're actually shipping, so that tools like cve-check can do the right thing. Rather than fetching version 3.2.48 and applying all patches up to and including version 3.2.57, we just fetch the latter in the first place. Signed-off-by: André Draszik <adraszik@tycoint.com> Acked-by: Sylvain Lemieux <slemieux@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06qemu: fix CVE-2016-7423 and CVE-2016-7908Kai Kang
Backport patches to fix CVE-2016-7423 and CVE-2016-7908 of qemu. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06qemu: supplementary fix of CVE-2016-5403Kai Kang
It is reported in qemu community that VM always exits with: | 2016-10-17T07:33:40.393592Z qemu-kvm: Virtqueue size exceede when VM is suspend and resume. Solution from the maintainer of virtio is to merge following 3 commits: http://git.qemu.org/?p=qemu.git;a=commit;h=bccdef6 http://git.qemu.org/?p=qemu.git;a=commit;h=58a83c6 http://git.qemu.org/?p=qemu.git;a=commit;h=4b7f91e The first 2 commits have been merged in qemu 2.7.0. Then apply the third one. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06oe-pkgdata-util: Use standard verb form in help info.Robert P. J. Day
"Shows" -> "Show", to be consistent with standard form of help output. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06tzdata: Update to 2016hArmin Kuster
Changes to future time stamps Asia/Gaza and Asia/Hebron end DST on 2016-10-29 at 01:00, not 2016-10-21 at 00:00. (Thanks to Sharef Mustafa.) Predict that future fall transitions will be on the last Saturday of October at 01:00, which is consistent with predicted spring transitions on the last Saturday of March. (Thanks to Tim Parenti.) Changes to past time stamps In Turkey, transitions in 1986-1990 were at 01:00 standard time not at 02:00, and the spring 1994 transition was on March 20, not March 27. (Thanks to Kıvanç Yazan.) Changes to past and future time zone abbreviations Asia/Colombo now uses numeric time zone abbreviations like "+0530" instead of alphabetic ones like "IST" and "LKT". Various English-language sources use "IST", "LKT" and "SLST", with no working consensus. (Usage of "SLST" mentioned by Sadika Sumanapala.) Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06tzcode-native: update to 2016hArmin Kuster
Changes to code zic no longer mishandles relativizing file names when creating symbolic links like /etc/localtime, when these symbolic links are outside the usual directory hierarchy. This fixes a bug introduced in 2016g. (Problem reported by Andreas Stieger.) Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06libpng: Upgrade 1.6.24 -> 1.6.25Maxin B. John
License file changes are due to updates in Version and Copyright date Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06libjpeg-turbo: Upgrade 1.5.0 -> 1.5.1Maxin B. John
Bug fixes and various improvements for AArch64 and PowerPC. Apply a patch from upstream to fix compilation on MIPS [RB] Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06ethtool: Upgrade 4.6 -> 4.8Maxin B. John
Various bug fixes and improvements. Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06harfbuzz: Upgrade 1.3.0 -> 1.3.2Maxin B. John
1.3.0 -> 1.3.2 Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06bluez5: Upgrade 5.41 -> 5.42Maxin B. John
Bug fixes, add support for new management tracing capability and marking GATT D-Bus APIs as stable interfaces Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06acpid: Upgrade 2.0.27 -> 2.0.28Maxin B. John
Bug fix release Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06orc: Upgrade 0.4.25 -> 0.4.26Maxin B. John
New upstream bugfix release Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06mmc-utils: Upgrade to latest git versionMaxin B. John
Upgrade to most recent commit: 2cb6695e8dec00d887bdd5309d1b57d836fcd214 Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06neon: Upgrade 0.30.1 -> 0.30.2Maxin B. John
Remove "gnutls_4.3_fixup.patch" since fix for PKCS#11 support under GnuTLS 3.x is included in version 0.30.2 Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06mc: Upgrade 4.8.17 -> 4.8.18Maxin B. John
New release contains bug fixes and refactoring of widget subsystem Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06testsdk.bbclass: Clean up comments, clarify image choices.Robert P. J. Day
Make it clear that SDK testing can use any valid image. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06texi2html: Allow compiling out-of-sourceOlaf Mandel
Compiling texi2html 5.0 out-of-source with USE_NLS set to no failed because it tried to copy from srcdir without using that variable. Fix this issue and add a reference to the upstream commit. Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06boost: fix upstream version checkAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06rt-tests: fix the recipe version to match upstreamAlexander Kanavin
Upstream had a 2.0 tag for a while, then removed it and added a 1.1 tag :-/ Let's make it match to avoid confusion. There's only one new commit added, which adds a missing manpage. Also, update the outdated version comment in rt-tests.inc Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06valgrind: update to 3.12.0Alexander Kanavin
Remove backported gcc5-port.patch Remove 11_mips-link-tool.patch as there is nothing in the target file (or the entire source tree) that resembles anything contained in the patch. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06libarchive: update to 3.2.2Alexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-19 10:55:06 +0000