aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2016-02-18glew: upgrade to 1.13.0.Ross Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18glew: rewrite to use upstream build systemRoss Burton
Instead of patching in a whole new build system using autotools, use the makefile-based system in upstream with careful variable assignments so that it cross-compiles correctly. One small patch was required to stop an unavoidable strip. Upstream does have a cmake-based build but it's not used or supported by the maintainer, and is quite buggy (for example: doesn't version the libraries, fails to link to required libraries). Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18socat: Fix build with muslKhem Raj
NETDB_INTERNAL is a glibc define Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18binutils: Fix useless rpaths QA warningKhem Raj
elfedit and readelf contains /usr/lib in elf header this patch deletes them from binaries, ideally it should be fixed in libtool and Makery of binutils mips target binutils dont build gold so remove them from ALTERNATIVES list depend on own version of chrpath native, so builds on build OS like Centos can work, the verison of chrpath on centos is old enough to not support dealing with multi-arch ELF files. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18image/populate_sdk: seprate variables to fix dependencyChen Qi
Previously, do_rootfs depends on variables like SDK_OS, SDK_OUTPUT, etc. And changing variables like POPULATE_SDK_POST_HOST_COMMAND doesn't cause do_populate_sdk to rerun. This patch separates variables so that do_rootfs and do_populate_sdk could correctly depend on their related variables. [YOCTO #8670] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18gcc: Backport nios2 r31 fixMarek Vasut
Backport a fix from GCC mainline, which fixes libpcre 8.38 and expat 2.1.0 build on nios2. The example of the fixed error follows: | ./nios2-poky-linux-libtool --silent --mode=compile nios2-poky-linux-gcc -mel -mhw-div -mhw-mul --sysroot=/mnt/work/Yocto/build-nios2/tmp/sysroots/10m50 -I../expat-2.1.0/lib -I. -O2 -pipe -g -feliminate-unused-debug-types -Wall -Wmissing-prototypes -Wstrict-prototypes -fexceptions -DHAVE_EXPAT_CONFIG_H -o lib/xmltok.lo -c ../expat-2.1.0/lib/xmltok.c | {standard input}: Assembler messages: | {standard input}:4988: Error: r31 cannot be used with jmp; use ret instead | {standard input}:9703: Error: r31 cannot be used with jmp; use ret instead | {standard input}:20068: Error: r31 cannot be used with jmp; use ret instead | {standard input}:24020: Error: r31 cannot be used with jmp; use ret instead | Makefile:196: recipe for target 'lib/xmltok.lo' failed | make: *** [lib/xmltok.lo] Error 1 | WARNING: exit code 1 from a shell command. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18sqlite3: update 3.10.2 -> 3.11.0Andre McCurdy
http://www.sqlite.org/releaselog/3_11_0.html Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18insane: wrap autotools checks in inherits_class(autotools) checksRoss Burton
There's no point doing the autotools sanity checks if a recipe didn't inherit autotools, so check the inherits before doing the checks. Also pass -F (fixed strings) and -q (quiet) to grep. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18cmake: don't inherit autotoolsRoss Burton
autotools was inherited for some functions some time ago, but now all it's using it for explicitly is autotools_do_install(), which is basically just "make install". Invoke that directly and we can remove the inherit autotools. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18oeqa/selftest/bbtests: Test bitbake --setscene-only optionDaniel Istrate
Bitbake option to restore from sstate only within a build (i.e. execute no real tasks, only setscene) fix for [YOCTO #8876] Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18glew: don't put our CFLAGS into the pkgconfig fileRoss Burton
The pkgconfig file doesn't need to know what CFLAGS we're using to build with. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18dbus: update large file patchRoss Burton
Upstream has accepted this patch, so update the header and revise the patch to reflect the form that was merged. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18coreutils: fix problem with acl for 6.9 versionChen Qi
If 'acl' is not in DISTRO_FEATURES, building coreutils 6.9 would sometimes fail. The problem could be reproduced by executing the following command. `bitbake acl && bitbake coreutils -c configure && bitbake acl -c cleansstate && bitbake coreutils -c compile' Fix this problem by setting the correct value for the 'acl' PACKAGECONFIG. [YOCTO #8906] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18gcc-4.9/5.3: Ignore -fdebug-prefix-map in producer stringHongxu Jia
Backport from upstream master. The discussion detail: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69821 Compile without this fix: objdump -g packages-split/lib32-glibc-dev/usr/lib/gcrt1.o ... | <5f> DW_AT_producer : (indirect string, offset: 0x1b): GNU C99 5.3.0 -m32-march=core2 -mtune=core2 -msse3 -mfpmath=sse -mpreferred-stack-boundary=4 -g -O2 -std=gnu99 -fgnu89-inline -fdebug-prefix-map=/buildarea/raid0/hjia/buil d-20160127-yocto-buildpath-2/tmp/sysroots/lib32-qemux86-64= -feliminate-unused-debug-types -fmerge-all-constants -frounding-math -ftls-model=initial-exec ... Compile with this fix: objdump -g packages-split/lib32-glibc-dev/usr/lib/gcrt1.o ... | <5f> DW_AT_producer : (indirect string, offset: 0xa1): GNU C99 5.3.0 -m32 -march=core2 -mtune=core2 -msse3 -mfpmath=sse -mpreferred-stack-boundary=4 -g -O2 -std=gnu99 -fgnu89-inline -feliminate-unused-debug-types -fmerge-all-constants -frounding-math -ftls-model=initial-exec ... [YOCTO #7058] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18bitbake.conf: use target path as compile dir in debugging infoHongxu Jia
In debugging information, it uses target paths rather than build ones as compile dir. ... -fdebug-prefix-map=old=new When compiling files in directory old, record debugging information describing them as in new instead. ... Compile without this fix: objdump -g git/test.o ... The Directory Table (offset 0x1b): | 1 /buildarea/raid0/hjia/build-20160119-yocto-buildpath/tmp/sysroots/x86_64-linux/usr/lib/ i686-pokymllib32-linux.lib32-gcc-cross-initial-i686/gcc/i686-pokymllib32-linux/5.3.0/include | 2 /buildarea/raid0/hjia/build-20160119-yocto-buildpath/tmp/sysroots/lib32-qemux86-64/usr/include/bits | 3 /buildarea/raid0/hjia/build-20160119-yocto-buildpath/tmp/sysroots/lib32-qemux86-64/usr/include ... Compile with this fix: objdump -g git/test.o ... The Directory Table (offset 0x1b): | 1 /usr/lib/i686-pokymllib32-linux.lib32-gcc-cross-initial-i686/gcc/i686-pokymllib32-linux/ 5.3.0/include | 2 /usr/include/bits | 3 /usr/include ... [YOCTO #7058] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18glibc: Security fix CVE-2015-7547Armin Kuster
CVE-2015-7547: getaddrinfo() stack-based buffer overflow Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18glibc: CVE-2015-8776Armin Kuster
it was found that out-of-range time values passed to the strftime function may cause it to crash, leading to a denial of service, or potentially disclosure information. Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18glibc: CVE-2015-9761Armin Kuster
A stack overflow vulnerability was found in nan* functions that could cause applications which process long strings with the nan function to crash or, potentially, execute arbitrary code. Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18glibc: CVE-2015-8779Armin Kuster
A stack overflow vulnerability in the catopen function was found, causing applications which pass long strings to the catopen function to crash or, potentially execute arbitrary code. Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18glibc: CVE-2015-8777.patchArmin Kuster
The process_envvars function in elf/rtld.c in the GNU C Library (aka glibc or libc6) before 2.23 allows local users to bypass a pointer-guarding protection mechanism via a zero value of the LD_POINTER_GUARD environment variable. Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-16oeqa/parselogs: Whitelist dmi firmware failure message in 4.4 kernelsRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-16rng-tools: Fix underquoted m4 and libgcrypt floating dependencyRichard Purdie
The underquoted m4 caused build failures if libgcrypt wasn't present. The floating dependency on libgcrypt was just plain incorrect, particularly given the incorrect libgcrypt RDEPENDS. Change to use PACKAGECONFIG an default to on. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-16lib/qa.py: raise ValueError if file isn't an ELFRoss Burton
Instead of raising a generic Exception that can't be handled specifically, raise a ValueError. Also update the callers so any unexpected exceptions are not ignored. Also, rename isBigEngian() to isBigEndian(). Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-16lib/oe/qa: ELFFile: check that a path is a file before opening itRoss Burton
When opening an ELF file check that a filename points to a normal file before attempting to open it, as if the file turns out to be something more exotic like a FIFO it could hang forever. (From OE-Core rev: 4b3576bc30d8f8cdcde25189def8b059fc92b27c) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-16rng-tools: fix the build with muslChristopher Larson
musl doesn't provide argp, so we need argp-standalone, as we do for uclibc. Rather than passing in -largp via the recipe, patch the configure script to provide an argument for the libargp usage and check for it when needed, and use PACKAGECONFIG. The initial patch to check for libargp and use it if available came from Gentoo. The patches are kept separate despite the second modifying what the first does, in order to keep the history/origin clear. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-16layer.conf: Add gstreamer1.0-meta-base to SIGGEN_EXCLUDERECIPES_ABISAFERichard Purdie
This recipe and its packages are by design like a packagegroup and can be safely depended not to change names upon despite it being machine specific. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-16sstate: Add ca-certificates-native to postinst recipes listMing Liu
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-16nss: define RPATH variable for nss-nativeMarkus Lehtonen
Otherwise the nss libs do not get any RPATH/RUNPATH. Consequently, the .so dependencies of nss libs are always searched from the base lib directories of the host (i.e. /lib/ and /usr/lib). This causes problems with nss-native where the .so's should be searched from the base lib directories of the sysroot instead of the host file system. This particular problem has probably been unnoticed as most users are likely to have nss libraries installed on their host system. In this case everything most likely work as expected. [YOCTO #9041] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-16Revert "lsbinitscripts: fix the path for mountpoint"Richard Tollerton
This reverts commit e1a3c6e218779e2237c494e58209c06b871c47c4. util-linux upstream, busybox, and sysvinit all install mountpoint by default to /bin. Arch Linux, Debian, and Ubuntu (at least) all appear to install mountpount to /bin. AFAIK only Fedora and possibly other Red Hat derived distributions install it to /usr/bin. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Reviewed-by: Ken Sharp <ken.sharp@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-16libunwind: Fix build on ppcKhem Raj
gcc driver is fixed to pass correct options to linker to do secure plt linking when enabled. however this option --secure-plt is not supported by gold linker which is now passed by default from gcc driver. Hence the build fails when using gold. Therefore when we use gold then we do not use secure plt Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-16dbus-glib: 0.104 -> 0.106Maciej Borzecki
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-16conf/no-static-libs: add explicit rule for libicalRoss Burton
cmake doesn't have a standard for disabling static libraries so libical needs an explicit statement. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15runtime/systemd: Fix for boot time string parse errorBenjamin Esquivel
boot time string can change its format of the output of the amount of time it took to boot. It is required to handle graceful fail of the parsing errors that it provokes [YOCTO #8889] Signed-off-by: Benjamin Esquivel <benjamin.esquivel@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15security_flags: Add SECURITY_CFLAGS to TARGET_CC_ARCH for binutilsKhem Raj
libtool decides to filter out -fstack-protector-strong on its own and its documented here https://www.gnu.org/software/libtool/manual/html_node/Stripped-link-flags.html this causes linking errors when linking libbfd.so since objects (.o) are compiled using -fstack-protector-strong so they are expecting to link with libssp but the option goes missing in linker flags. With this patch the security flags are hoisted upto CC itself and libtool thankfully does not touch CC. Adding to CC also means that we can now remove it from LDFLAGS since when gcc driver is used to do linking then we have LD = CC and this option makes to linker cmdline Since CC is used without CFLAGS in configure tests, some tests fail complaining that -Olevel is not used while using _FORTIFY_SOURCE therefore added SELECTED_OPTIMIZATION to TARGET_CC_ARCH as well Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15binutils: Use tip of 2.26 branchKhem Raj
Until 2.26.1 is released there are few fixes which are needed especially when using -fpie, here are changes that are part of this version bump H.J. Lu (7): Add a testcase for PR ld/18591 Store estimated distances in compressed_size Remove duplicated marker for 2.26 in gas/NEWS Add -mrelax-relocations= to x86 assembler Mask off the least significant bit in GOT offset Enable -Bsymbolic and -Bsymbolic-functions to PIE Fix a typo in objcopy manual John David Anglin (1): Fix /usr/bin/ld: final link failed: File truncated error on hppa Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15buildhistory.bbclass: remove out-dated information on requestPatrick Ohly
buildhistory.bbclass by design is incremental: each build adds or updates information. Information is never removed. Sometimes it can be useful to reduce the information only to those recipes that were build during a specific bitbake invocation, for example when the invocation does a full world build. This is now possible by setting BUILDHISTORY_RESET as explained in the modified class. The comment on the variable also mentions the caveats associated with using this mode. In this mode, buildhistory.bbclass first moves all existing information into a temporary directory called "old" inside the build history directory. There the information is used for the "version going backwards" QA check. Then when the build is complete and before (potentially) committing to git, the temporary directory gets deleted. Because information that has not changed during the build will be reconstructed during full world rebuilds, a git log will then only show real updates, additions and removals. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKEMike Crowe
Setting EXTRA_OEMAKE to "-e MAKEFLAGS=" by default is a historical accident and many classes (e.g. autotools.bbclass, module.bbclass) and recipes have to override this default in order to work with sensible build systems. Now that openssl and pciutils have been fixed to set EXTRA_OEMAKE explicitly it is possible to set EXTRA_OEMAKE = "". Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15apmd: fix build with static libraries disabledRoss Burton
apmd was using foo.o in Makefile dependencies but if libtool is being used then those are the statically linked intermediate files. When static libraries are globally disabled they won't be generated by libtool-cross so the build fails. Instead, use the libtool intermediate wrapper .lo files so the build succeeds. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15oeqa: Update to handle domain specific references in build logsRichard Purdie
With the addition of the task name to recipe output, the sanity tests need updates where they are looking for specific messages. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15libpng12: Handle no static libsRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15ed_0.5: Handle --disable-static optionRichard Purdie
Also clean up use of immediate expansion as there are cleaner mechanisms now. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15conf/distro/include: Add no-static-libs.incRichard Purdie
Static libraries are old technology. We've left them around since in previous tests, they only added around 5% to the overall build time. With new and interesting uses of OE, they're becoming more problematic. For example, sstate becomes much larger with static libs enabled which increases the size of eSDK and increases the time taken for sstate operations. Since the static libs contain all the debugging symbols, they're also pretty huge. This patch adds a common include file which allows the user or distro to disable the static libraries in the majority of cases. There are some libs where we do need the static lib, a good example being pseudo-native which uses sqlite3-native static libs. These are left enabled by the include file, as are recipes where --disable-static doesn't work, or isn't supported. This list can likely be reduced over time as individual corner cases are addressed. Maintaining this list in a common location is more desireable than everyone doing it themselves. Poky will switch to using this, OE-Core will need to discuss that as its default. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15classes/buildhistory: fix for python function parsing changePaul Eggleton
Variable expressions are no longer expanded in python functions as of BitBake commit 8bf33a8e92c0e188fa392030025756196c96fcbb, so we've now got to do this explicitly here. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15valgrind: Fix build with muslKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15rpm: Fix build with muslKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15gstreamer1.0-meta-base: Mark as machine specific due to COMBINED_FEATURESRichard Purdie
http://git.openembedded.org/openembedded-core/commit/?id=948165dce7475b815a344fd3c3d58165e6865d48 makes gstreamer1.0-plugins-base-alsa depend on COMBINED_FEATURES. This is an allarch recipe so this only works if all your machines have the same MACHINE_FEATURES. The recipe therefore needs to become machine specific. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15gdb-cross-canadian: Add missing virtual/* DEPENDSRichard Purdie
cross-canadian does INHIBIT_DEFAULT_DEPS so we need to add the various virtual/* toolchain pieces we rely on manually. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15e2fsprogs: Update to upstream version of a patchRichard Purdie
Switch to the upstream version of the xattr patch. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15gdb: Rationalise PACKAGECONFIGRichard Purdie
Having two separate PACKAGECONFIG defaults and settings in two separate files is confusing. Move all to the common inc file. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15insane: Add --disable-static to UNKNOWN_CONFIGURE_WHITELISTRichard Purdie
With the addition of a common class passing in this option, add it to the list of standard "unknown" configure options which are known about. Its not interesting/productive to go and update every recipe to handle this flag. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>