Age | Commit message (Collapse) | Author |
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
useradd tested is done via:
test_non_root_user_can_connect_via_ssh_without_password and
test_non_root_user_can_connect_via_ssh_without_password
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
remove test
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
xserver testing is done at runtime and selftest via sato image
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
ltpstress was removed in Oct 2018
https://github.com/linux-test-project/ltp/commit/e752f7c19674d9b2f7d37aed123561a3f6410e97#diff-5231627fc8640e0adb955f9e69c3c08d
Remove LTP stress tests
ltpstress.sh runs stress.part[1-3]. But these runtest files just
duplicate definitions:
* stress.part1: fs, mm, nfs
* stress.part2: ipc, math, nptl
* stress.part3: net.multicast, pty, syscalls
The definitions are outdated anyway. There is no point trying
to keep them sync.
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Some test should not be run in QEMU systems so
add some checks to make that easier
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
This is so we can standardize what is being run as a baseline
for folks who want to submit for Compatiblitity
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
This reverts commit 1d5ab1936c9fdf5d2613562ab1ace920089de49b.
|
|
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that ldconfig may get installed from a feed, use it when it's
available on the target.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Only recommend its installation, if it's enabled in distro features.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Back in 2010[1] we made pseudo statically link against sqlite3. Since then
the world has changed, pseudo now has separate processes for the database
in the server and the client and they have separate linking commands.
Also, whilst there were concerns about needing specific versions of sqlite3,
in the OE environment, this is always the case.
[1] http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=ad0ac0ecd38fc77daf42485489fccc10a5e1e3e7
The static sqlite3-native is causing us problems, in particular:
tmp/work/x86_64-linux/pseudo-native/1.9.0+gitAUTOINC+060058bb29-r0/recipe-sysroot-native/usr/lib/libsqlite3.a(sqlite3.o):(.data.rel+0xb0): undefined reference to `fcntl64'
which occurs if sqlite3-native was built on a machine with glibc 2.28 or later
and pseudo-native is being built on glibc before that. With dyanmical linking,
libc is backwards compatible and works but with static linking it does not.
There appears to be no easy way to avoid this other than adding a copy of
sqlite3 into the pseudo recipe. Given the static linking doesn't seem to
be required any longer due to the separate processes, drop that to fix
those issues.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Instead of overwriting the stamp name with 'dummy', handle
setscene promotion in the default case block
* Merge '*do_image_complete_setscene*' and '*do_image_qa_setscene*'
case handling
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we try to build images for machine which is tuned for
cortex-a32, then libgcc-initial recipe fails to build with
below error message.
-- snip --
configure:3529: aarch64-poky-linux-gcc -mcpu=cortex-a32+crc -fstack-protector-strong -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=.../tmp/work/aarch64-poky-linux/libgcc-initial/9.2.0-r0/recipe-sysroot -o conftest -O2 -pipe -g -feliminate-unused-debug-types -fmacro-prefix-map=.../tmp/work/aarch64-poky-linux/libgcc-initial/9.2.0-r0=/usr/src/debug/libgcc-initial/9.2.0-r0 -fdebug-prefix-map=.../tmp/work/aarch64-poky-linux/libgcc-initial/9.2.0-r0=/usr/src/debug/libgcc-initial/9.2.0-r0 -fdebug-prefix-map=.../tmp/work/aarch64-poky-linux/libgcc-initial/9.2.0-r0/recipe-sysroot= -fdebug-prefix-map=.../tmp/work/aarch64-poky-linux/libgcc-initial/9.2.0-r0/recipe-sysroot-native= -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -fstack-protector-strong -Wl,-z,relro,-z,now conftest.c >&5
aarch64-poky-linux-gcc: fatal error: unknown value 'cortex-a32+crc' for '-mcpu'
-- snip --
- Replacing TUNE_FEATURES from aarch64 to armv8a will solve the above
build issue.
- Changed BASE_LIB to 'lib', as cortex-a32 is a 32bit ARMv8a architecture.
The sample machine config file (qemuarma32.conf) used to reproduce
the error looks like:
-- snip --
require conf/machine/include/tune-cortexa32.inc
require conf/machine/include/qemu.inc
KERNEL_IMAGETYPE = "Image"
SERIAL_CONSOLES ?= "115200;ttyAMA0 115200;hvc0"
KMACHINE_qemuarma32 = "qemuarm64"
-- snip --
Signed-off-by: Jagadeesh Krishnanjanappa <workjagadeesh@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
harfbuzz binary package size increased from 624608 bytes in yocto 2.5 to
1365431 bytes in yocto 3.0. Most of the size increase is in the new
libharfbuzz-subset.so* library
https://harfbuzz.github.io/utilities.html#utilities-command-line-hbsubset
Split it to its own binary package which will be installed if anyone needs it.
Effect to harfbuzz binary package size is:
-PKGSIZE = 1476271
+PKGSIZE = 1007424
Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Pass `--checksum md5` and `--checksum sha256` to opkg-make-index.
Sha256 checksum enables more reliable install-time validation of IPKs.
This is particularly useful when installing from signed feeds --
I.e. feeds using signed Packages index files that deliver otherwise
unsigned IPKs. Such feeds rely on hash validation of enclosed IPKs to
thwart tampering. After download, opkg verifies IPK's checksum against
the (signed) Packages index file. Weak hashes like md5 are prone to
collision and therefore tampering.
The md5 checksum is purely for backward compatibility. Sha256 validation
was recently added to opkg. Newer builds of opkg will use it. Older
builds still look for an md5 checksum. Md5 is deprecated and should be
removed once old build are phased out.
Testing: I ran `bitbake package-index` after building a few IPKs and
verified MD5Sum and SHA256sum attributes are present in Packages.
Using opkg-utils 0.4.0.
Performance Impact: It takes about 40 seconds to cleanly re-index 8000
IPKs on an Intel Xeon E5-1620 machine. This was previously about
20 seconds.
NOTE: It's recommended to delete all Packages* files after applying this
patch. Otherwise, some IPKs won't have sha256.
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable nativesdk builds of gnupg and it's dependencies (libksba, npth,
and pinentry) to fix builds of nativesdk-opkg.
This is necessary on distribution which enable gpg signature
verification in opkg and also build SDK images that include opkg.
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gnupg-gpg is a minimal installation of gnupg with enough functionality
to verify signatures and manage keys. Use this package instead of full
gnupg to slim down opkg installations with "--enable-gpg".
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add minimal "gnupg-gpg" package containing just enough binaries to run
gpg and gpg-agent. Add dependency in normal "gnupg" package to preserve
old behavior.
Some applications like opkg don't need all functionality provided by
normal gnupg installations. This minimal package provides just enough
functionality to verify and manage keys in opkg, in order to minimize
disk overhead.
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
libevent produces several libraries that might or might not
be used in the end. We can prevent those potentially unused
libraries from being pulled into a file-system by splitting
the individual shared libraries into individual packages.
Because this recipe only provides shared libraries which are
handled automatically by bitbake (shlibs), there is no need
to add the subpackages to the RDEPENDS of PN for backwards
compatibility. The packaging process of dependees will
simply pull in the sub-packages as runtime dependency as
needed.
This also how Debian splits this up.
While updating the packaging, we can also drop event_rpcgen.py
which appears to be a tool for generating rpc bindings, i.e.
something that should normally be in -dev. Given Debian
doesn't package this at all, and given it actually requires
python to run but no runtime dependency is stated at the
moment, it would appear that no users of this exist.
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this change, efibootmgr is unable to recover BootOrder if lost
during a previous write operation, e.g. exceeded storage capacity. This
is problematic using EFI to manage boot flow from Linux (E.g. via RAUC).
https://www.kernel.org/doc/Documentation/filesystems/efivarfs.txt
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add "esp_extra_blocks" plugin parameter so that caller may change
ESP's free space from the default 100 blocks.
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add "esp_label" plugin parameter so that caller may override default
ESP partition label 'EFIimg'.
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since the Sun RPC is deprecated in glibc, the rpc header files
are not provided any more, but it allows alternative RPC
implementations, such as TIRPC or rpcsvc-proto, to be used.
So we create the symbol link for rpc header files for tirpc to
be more compatible with the glibc version and the application usage.
Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
>From announcement:
What's new in the WebKitGTK 2.26.2 release?
===========================================
- Improve performance of querying system fallback fonts.
- Don't use prgname in dbus-proxy socket path.
- Fix thread-safety issues in image decoders.
- Fix the build with WebDriver disabled.
- Disable accelerated compositing when we fail to initialize the EGL dispaly under Wayland.
- Fill the objects category in emoji picker.
- Fix several crashes and rendering issues.
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Modern distros (e.g. fedora30) are starting to use the new statx() syscall through
the newly exposed glibc wrapper function in software like coreutils (e.g. the ls
command). Add support to intercept this to pseudo.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds an option that can be used to copy the offending packages to a temp
directory for later evaluation. This is useful on the Autobuilder to
investigate failures.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There isn't anything specific about the target in these cases an in
general recipes should touch CFLAGS. This ensures people don't
copy/paste bad example usages. In reality, behaviour is mostly
unchanged.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[ YOCTO #13212 ]
Suggested-by: Romuald Jeanne <romuald.jeanne@st.com>
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add new package for bcm4366c and include available NVRAM config files
into the corrent bcm* packages.
Signed-off-by: Samuli Piippo <samuli.piippo@qt.io>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes CVE-2019-17266.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Zang Ruochen <zangrc.fnst@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
-Refresh the following patch:
ethtool/avoid_parallel_tests.patch
Signed-off-by: Zang Ruochen <zangrc.fnst@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|