| Age | Commit message (Collapse) | Author |
|---|
|
A few firmware files use this filename extension, like korg/k1212.dsp .
Create respective packages.
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
SSTATEPOSTINSTFUNCS is now set with = in sstate.bbclass, and because
the line here in buildhistory.bbclass ends up being parsed before that
we now need to use _append or the value we are adding will be wiped out.
This fixes buildhistory no longer recording package information since
OE-Core revision 9d659c6f20fa4a141b491c62a3ef0dfb1f896d9c.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that glibc 2.20 has been released. We switch
to use release branch and remove the already applied
patch
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
asm/ptrace.h must be included in two files.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous commit, 'wic: Remove 3rdparty/urlgrabber' didn't actually
remove all references to urlgrabber - this does however.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that we're running glibc 2.20 not 2.19, backport the configure.ac fixes from
upstream.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These two services are fairly immature and need careful integration into the
rest of the system, so disable them for now.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This recipe is used by alsa-utils-alsaconf so don't use ${BP} in the SRC_URI.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* in some cases (e.g. with external toolchain which doesn't respect our
reasonably old version set in OLDEST_KERNEL) it's possible to have libc
which requires newer kernel than what we have on builders, qemu supports
-r param to use different uname than what's returned by host system.
* change qemu_run_binary to pass -r ${OLDEST_KERNEL} and add the same to
QEMU_OPTIONS which are used by qemuwrapper-cross
* maybe we should eventually convert all qemu_run_binary usages always include
qemuwrapper-cross dependency and always call qemu through that (it
seems very strange that qemu_target_binary is called from qemuwrapper
and for allarch recipes it can return qemu-allarch as qemu binary).
qemu_run_binary is used by:
meta/classes/gtk-immodules-cache.bbclass: ${@qemu_run_binary(d, '$D', '${bindir}/gtk-query-immodules-$maj_ver.0')} \
meta/classes/qemu.bbclass:def qemu_run_binary(data, rootfs_path, binary):
meta/recipes-core/systemd/systemd_213.bb: ${@qemu_run_binary(d, '$D', '${base_bindir}/udevadm')} hwdb --update \
meta/recipes-graphics/pango/pango.inc: ${@qemu_run_binary(d, '$D','${bindir}/${MLPREFIX}pango-querymodules')} \
and qemuwrapper directly by:
scripts/postinst-intercepts/update_font_cache:PSEUDO_UNLOAD=1 qemuwrapper -L $D -E LD_LIBRARY_PATH=$D/${libdir}:$D/${base_libdir}\
scripts/postinst-intercepts/update_pixbuf_cache:PSEUDO_UNLOAD=1 qemuwrapper -L $D -E LD_LIBRARY_PATH=$D/${libdir}:$D/${base_libdir}\
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Reported-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently a USB stick gets mounted on /run/media/sdX, where X is the
letter corresponding to a certain drive. In older builds of core-image-sato
it got mounted in /media/sdX. This change made the drives to not be
displayed in graphical applications which use glib-2.0 such as the
File Manager (pcmanfm). The reason is that the gio component of glib-2.0
which handles mounts contains a function which determines if a mount
is worthy to be displayed in the UI or not. The function is called
g_unix_mount_guess_should_display().
It expects a drive to be mounted in /run/media/<username>/sdX, but
in the current build the username part is missing in case a root user
is authenticated in the system.
The easiest solution is to allow the display of drives mounted in the
path used by the current configuration and that is /run/media/sdX.
[YOCTO #6492]
Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The user site-packages gets inserted into sys.path ahead of the
system site directories, so a site package installed there will
be used in preference to what's in our sysroot, causing less
deterministic builds, and potential build breakage, depending
on what the user has installed there. Disable it for our native
python, so they don't affect our builds.
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Yasir-Khan <yasir_khan@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Only add plugins-ugly or plugins-bad to the DEPENDS if they are
added to the COMMERCIAL_AUDIO_PLUGINS or COMMERCIAL_VIDEO_PLUGINS.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch changes the dbus policy settings in order to allow
calling methods over dbus. bluez5 and pulseaudio rely on this
mechanism to configure media end points. Previously bluetoothd
was failing to configure the media end points with error
org.freedesktop.DBus.Error.AccessDenied, due to which bluetooth
headset and smartphone were unable to connect in A2DP mode.
Signed-off-by: Yasir-Khan <yasir_khan@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changelog:
http://www.alsa-project.org/main/index.php/Changes_v1.0.27.2_v1.0.28
0001-alsactl-don-t-let-systemd-unit-restore-the-volume-wh.patch updated.
(From OE-Core rev: 5a3331b7ee8bb565ebb3823fc23123120ccd653d)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Systemd depends on the os-release hence adding
RRECOMMENDS for the systemd package.
[ RB - updated for 216 ]
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Sujith H <Sujith_Haridasan@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The /etc/os-release will have the operating system identification data.
Tested on target with systemd enabled. Here is the sample file looks
in the file:
ID=poky-ivi-systemd
NAME=Yocto GENIVI Baseline (Poky/meta-ivi)
VERSION=6.0+snapshot-20140721 (daisy)
VERSION_ID=6.0+snapshot-20140721
PRETTY_NAME=Yocto GENIVI Baseline (Poky/meta-ivi) 6.0+snapshot-20140721 (daisy)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Sujith H <Sujith_Haridasan@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Revert a patch to the MIPS-specific code that was causing compile failures.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
fix-build-when-wayland-backend-enabled.patch removed as the issue
is fixed in upstream.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
License terms have not changed. In case of LICENSE and png.h lines 0-15
the version numbers and release dates have changed. In case of png.h lines
229-343 the text has not changed at all, but old line numbers were not
pointing to correctly to the licensing terms segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Automake recipe provides automake 1.14.1 anyway
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
libxkbcommon depends on xkeyboard-config
Signed-off-by: Mikhail Durnev <mikhail_durnev@mentor.com>
Signed-off-by: Abhijit Potnis <abhijit_potnis@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In some cases we do either need to add extra sstate manipulation
functions, or change the existing modification functions. This patch
parametrizes it to SSTATEPOSTCREATEFUNCS after sstate_create_package
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use RPM_PREFER_ELF_ARCH to instead of RPM_PREFER_COLOR as rpm upstream
suggested, and use "4" to instead of "3" since it is a bit mask (not
enumeration), so we need "4" here.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a new feature named 'perf-libunwind'. Adding this support to perf allows it
to do stack traces on ARM - thumb2 and MIPS targets. PERF_FEATURES variable in
perf-features.inc will enable the perf-libunwind.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add libunwind from meta-oe to oe-core, since perf depends on it.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The ipk or deb can't depend on file such as "/bin/bash" or
"/usr/bin/perl", so it knows nothing about the pkg depends bash or perl,
thus there would be dependencies problems when we run "apt-get
install/remove <pkg>" on the target, this check can help us find the
issues and then fix them manually.
* Benefits:
- Help to fix file rdepends issues for ipk and deb
- Help to fix abnormal rdepends.
- Help to check whether the rdepends is OK or not after build each
recipe (don't have to install to the image), for example, a recipe may
generate 10 binary packages, only a part of them will be installed to
the image by default, we can know whether the rdepends are OK or
not for the ones which are installed, but can't know the ones which
are not installed, this patch can help check all the 10 binary
packages' rdepends.
* Basic designs:
- Get all the RDEPENDS on the chain.
- Get the pkg's FILERPROVIDES from oe.packagedata.read_subpkgdata()
and save to set filerdepends.
- Get each RPDEPENDS' FILERPROVIDES, RPROVIDES and FILERPROVIDESFLIST,
and save to set rdep_rprovides.
- Do the set "filerdepends -= rdep_rprovides" and QA issue if
filerdepends is not null.
[YOCTO #1662]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Do not set the rpm_version to 5 if it is not provided, instead
determine the real rpm version.
(From OE-Core rev: 48beaee2e5b2b4ae35c596c19f8a38e0ff4427e9)
Signed-off-by: Kévin THIERRY <kevin.thierry@open.eurogiciel.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make libasound runtime depends on alsa-conf to install alsa-conf to rootfs.
Signed-off-by: Zidan Wang <b50113@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It is not a problem if a package requires nothing (similar to RDEPENDS
is null), for example, these packages depends on nothing:
[snip]
alsa-conf-base
base-files
eglibc-binary-localedata-en-us
xserver-xf86-config
[snip]
The rpmresolve-native's algorithm is:
===fake code
for pkg in pkg1, pkg2, pkg3:
rc = get_req(pkg)
return rc
===fake code
Suppose of the 3 pkgs requires null:
- We are lukcy if pkg1 or pkg2 is null, nothing happend.
- We are *not* lukcy if pkg3 is null, and will get the error when "INHERIT +=
'buildhistory'":
ERROR: Cannot get the package dependencies. Command
'/path/to/x86_64-linux/usr/bin/rpmresolve -t /path/to/var/lib/rpm' returned 1:
This patch fixes the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a cross compilation fix. It allows systemtap to find the
kernel map file in the right place, i.e. in the kernel build tree.
Without this fix it takes a map file from the build host, if available.
Signed-off-by: Mikhail Durnev <mikhail_durnev@mentor.com>
Signed-off-by: Muzaffar Mahmood <muzaffar_mahmood@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Marked __syscall.compat_sendfile as optional
Signed-off-by: Mikhail Durnev <mikhail_durnev@mentor.com>
Signed-off-by: Muzaffar Mahmood <muzaffar_mahmood@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using the useradd-staticids.bbclass under meta/classes,
this error occurs:
"<username> - <username>: Username does not have a static uid defined."
There was a problem with the regular expression for parsing parameters,
it was sometimes returning an empty string.
I have fixed this by skipping empty strings.
Signed-off-by: Fabrice Coulon <fabrice@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
During spec generation, ideally directories should not be auto
packaged under the %file section of rpm packages but take ownership of
specific directories.
* packages only empty directories or explict directory.
See:
- http://www.rpm.org/max-rpm/s1-rpm-inside-files-list-directives.html
- "The %dir Directive"
* This will prevent the overlapping of security permission.
For example, in Tizen the directory /etc have smack label 'System::Shared'
So Only one package should own and set the label of /etc to prevent
the overwriting of the smack label.
Existing behaviour is maintained if DIRFILES is not set. If it is set,
the modified behaviour is used. If can be set to an empty value by
core recipes to trigger the modified behaviour.
[RP: Modified to allow optional usage of DIRFILES]
Signed-off-by: Ronan Le Martret <ronan@fridu.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In systemd_216, journald by default doesn't forward messages to
syslog daemon. This breaks the oeqa testing cases. So we enable
forwarding the messages for now.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The basic.target itself requires sysinit.target, so there's no
need to write this redundant line in the run-postinsts unit file.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to prevent the init script from running via systemd because
its functionality has been implemented interanlly in systemd.
In a systemd system, we can add configuration files under
/etc/modules-load.d/ to make things work.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to prevent the psplash init script from running via systemd
because the script is supposed to be used by sysvinit system and it
doesn't have any real effect in a systemd based system.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When 'sysvinit' and 'systemd' are both in DISTRO_FEATURES, we need
to prevent the init script from running via systemd.
This is because that the functionality has been implemented internally
in systemd.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When 'sysvinit' and 'systemd' are both in DISTRO_FEATURES, we need
to prevent the init script from running via systemd.
This is because that the functionality of the init script has implemented
in systemd internally.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We now support executing scripts under /etc/rcS.d. So we need to
mask several more init scripts here to prevent them from running
at boot time.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we are building a systemd image with 'sysvinit' not in DISTRO_FEATURES,
the initscripts should not be installed into the image, as they are useless.
What's more, we as now support executing scripts under /etc/rcS.d, the
boot time will be increased by these scripts as the systemd will try to
translate them into temporary service files.
These init scritps are actually needed only when 'sysvinit' is in
DISTRO_FEATURES.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 'keymaps' package actually doesn't have runtime dependency on
VIRTUAL-RUNTIME_initscripts, thus removing this dependency.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Inherit update-rc.d.bbclass to handle sysv init script.
Also make the 'at' daemon start in runlevel 2,3,4,5 instead of S.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 'at' package actually doesn't have runtime dependency on
VIRTUAL-RUNTIME_initscripts, so remove this dependency.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Exiting with '2' is actually expected with rpcbind, because it catches
SIGTERM and exits with '2' explicitly.
The related code is as follows.
(void) signal(SIGTERM, terminate);
/*
* Catch the signal and die
*/
static void
terminate(int dummy /*__unused*/)
{
close(rpcbindlockfd);
unlink(_PATH_RPCBINDSOCK);
unlink(RPCBINDDLOCK);
syslog(LOG_ERR,
"rpcbind terminating on signal. Restart with \"rpcbind -w\"");
write_warmstart(); /* Dump yourself */
exit(2);
}
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Carlos Rafael Giani
Paul Eggleton
Khem Raj
Joe Slater
Tom Zanussi
Ross Burton
Richard Purdie
Martin Jansa
Fathi Boudra
Marius Avram
Yasir-Khan
Drew Moseley
Cristian Iorga
Sujith H
Marko Lindqvist
Mikhail Durnev
Hongxu Jia
Robert Yang
Chong Lu
Dan McGregor
Kévin THIERRY
Zidan Wang
Fabrice Coulon
Ronan Le Martret
Chen Qi