aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-09-01kernel-yocto: simplify branch SRCREV validationBruce Ashfield
The checking of machine and meta branch SRCREVs was inconsistent and didn't allow a mixed AUTOREV machine/meta branch combination. By simplifying the checks and changing the logic, we can now allow this combination. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-09-01kernel-yocto: remove KBRANCH_DEFAULTBruce Ashfield
KBRANCH_DEFAULT was introduced as a way to trigger the enforced build of a particular branch of the tree. With the fetcher now enforcing SRCREVs existing on a branch, we can simply validate that the SRCREV is reachable from the final branch and no longer care about enforcing a given branch. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-09-01kernel-yocto: remove branch existence checking in do_validate_branchesBruce Ashfield
Now that the fetcher will enforce branch existence, we no longer need to confirm that a branch exists, and that it was the branch requested to be built. We know the branch exists and we'll confirm that the specified SRCREV is going to be built after we've patched the tree. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-09-01kernel-yocto: remove SRC_URI kbranch validationBruce Ashfield
We no longer need to check if the KBRANCH matches the branch specified in the SRC_URI. This is taken care of by the fetcher at the beginning and SRCREV ancestor validation after patching. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-09-01kernel-yocto: remove containing branch checkBruce Ashfield
The bitbake fetcher now enforces that a commit is contained by a branch, so this code can be dropped from do_validate_branches. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-09-01kernel-yocto: move SRCREV validation to patching phaseBruce Ashfield
Rather than attempting to condition the entire tree to machine SRCREV (since we don't know what branch will be built), we can instead wait until patching has completed and then confirm that we are indeed building a decendant of the specified SRCREV. The result is a much simpler check, and no mangling of the tree. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-09-01kernel-yocto: use cat-file instead of git-showBruce Ashfield
Parsing the output of git show is error prone, since it changes based on the type of issue with bad comit IDs. Since the output is no longer used in the case of a valid ref, we can switch to git-cat-file and simply check the return code. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-09-01kernel-yocto: remove redundant SRCREV checkBruce Ashfield
do_validate_branches checks to ensure that a valid machine SRCREV was set. A test against an empty SRCREV is done in two separate locations, we only need one, since the first check immediately returns and the second check never hits. At the same time, we can stop referring to the same commit hash by 3 different names. Instead we assign to a local variable at the top of the routine, and refer to it at all times. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-08-31tzcode: update to 2014gArmin Kuster
The readme md5sum changed do you wording changes. Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31tzdata: update to 2014gArmin Kuster
For a full description of the changes see: http://mm.icann.org/pipermail/tz-announce/2014-August/000024.html Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31libpam: remove MLPREFIX from PNRobert Yang
The commit df3038768f59f7a0c814974ff674d4e59cbdfca4 changed 'libpam' to 'pn', then we don't need the "MLPREFIX + pn" any more, otherwise we would get the name like: "lib32-lib32-libpam-x", and the warn: WARNING: QA Issue: lib32-pam-plugin-access rdepends on lib32-lib32-libpam-suffix, but it isn't a build dependency? [build-deps] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31linux-libc-headers: update to 3.16Bruce Ashfield
Updating the linux-libc-headers to the 3.16 release. This matches the current -dev kernel version, and is compatible with the existing named kernel versions (3.10, 3.14). Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2014-08-31libpam: Fix multilib packagingOtavio Salvador
The plugin runtime dependencies were not including the multilib prefix, fix it. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31libpam: Fix runtime providersOtavio Salvador
The runtime providers were commented out. Removing the comment brings up a issue with the native renaming which has been workarounded disabling the runtime recommendation. This is indeed a workaround so a FIXME comment has been added to remind about it in case we someday move to native prefix. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31libical: upgrade to 1.0.0Cristian Iorga
pthread-fix.patch no longer needed, included upstream; Switched to new website, new bug tracker, new source repo. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31libpcap: upgrade to 1.6.1Cristian Iorga
- Still BSD licensed, some changes into pcap triggered a checksum change; - ieee80215-arphrd.patch removed, obsolete. - switched to ${BP} variable; Changelog from previous version: Saturday Jul. 19, 2014 mcr@sandelman.ca Summary for 1.6.1 libpcap release some fixes for the any device changes for how --enable-XXX works Wednesday Jul. 2, 2014 mcr@sandelman.ca Summary for 1.6.0 libpcap release Don't support D-Bus sniffing on OS X fixes for byte order issues with NFLOG captures Handle using cooked mode for DLT_NETLINK in activate_new(). on platforms where you can not capture on down interfaces, do not list them but: do list interfaces which are down, if you can capture on them! Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31iproute2: upgrade to 3.16.0Cristian Iorga
Bugfixes. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31at: Upgrade to 3.1.15Saul Wold
Rebase pam.conf.patch Move to generic files -> at for patches directory Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31libassuan: Upgrade to 2.1.2Saul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31libxkbcommon: Upgrade to 0.4.3Saul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31man-pages: Upgrade to 3.71Saul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31less: Upgrade to 466Saul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31alsa-utils: upgrade to 1.0.28Cristian Iorga
Changelog: http://www.alsa-project.org/main/index.php/Changes_v1.0.27.2_v1.0.28 0001-alsactl-don-t-let-systemd-unit-restore-the-volume-wh.patch updated. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31alsa-tools: upgrade to 1.0.28Cristian Iorga
mips_has_no_io_h.patch removed, no longer necessary. Changelog: http://www.alsa-project.org/main/index.php/Changes_v1.0.27.2_v1.0.28 Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31alsa-lib: upgrade to 1.0.28Cristian Iorga
Changelog: http://www.alsa-project.org/main/index.php/Changes_v1.0.27.2_v1.0.28 Update-iatomic.h-functions-definitions-for-mips.patch removed, integrated upstream. Check-if-wordexp-function-is-supported.patch updated. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31package_manager.py: enable smart non-interactive modeEd Bartosh
Added --quiet option to smart command line. Without this option smart 1.4.1 turns into interactive mode, i.e. start asking questions and expecting answers. Internally within smart, this changes the default UI to one which just prints to stderr, the naming of the parameter is a little odd but does what we need. Signed-off-by: Ed Bartosh <eduard.bartosh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31libtirpc: upgrade to 0.2.5Cristian Iorga
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31gstreamer1.0-plugins-ugly: upgrade to 1.4.1Cristian Iorga
Bugfix release. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31gstreamer1.0-rtsp-server: upgrade to 1.4.1Cristian Iorga
Bugfix release. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31gstreamer1.0-plugins-bad: upgrade to 1.4.1Cristian Iorga
Bugfix release. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31gstreamer1.0-plugins-good: upgrade to 1.4.1Cristian Iorga
Bugfix release. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31gstreamer1.0-plugins-base: upgrade to 1.4.1Cristian Iorga
Bugfix release. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31gstreamer1.0-libav: upgrade to 1.4.1Cristian Iorga
Bugfix release. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31gstreamer1.0: upgrade to 1.4.1Cristian Iorga
bugfix release. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31systemd: add PACKAGECONFIG for 'elfutils'Chen Qi
Add PACKAGECONFIG for 'elfutils'. This also fixes a build-deps QA warning about libdw. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-29useradd: Add setscene dep on pseudo-nativeJate Sujjavanich
A recipe will sometimes be rebuilt unnecessarily if it adds users via useradd and the pseudo-native task has not been populated. This patch adds the correct dependency. Signed-off-by: Jate Sujjavanich <jatedev@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-29qemu-native: depends on libxext-native when enable sdlRobert Yang
Fixed do_configure error: ERROR: User requested feature sdl configure was not able to find it. Install SDL devel The error message from log.do_configure, and if we check config.log, the error is: sysroots/x86_64-linux/usr/lib/libXext.so.6: undefined reference to `_XEatDataWords' The _XEatDataWords is provided by libX11.so, the dependencies are: qemu-native -> sdl(from the host) -> libXext.so(maybe host or native) -> libX11.so (maybe host or native) For example on Ubuntu 12.04 x86_64, the link route is: qemu-native's do_configure sdl checking: /usr/lib/x86_64-linux-gnu/libSDL.so --> <sysroots>/x86_64-linux/usr/lib/libXext.so.6 --> /usr/lib/x86_64-linux-gnu/libX11.so So it is: host sdl -> sysroot libXext.so.6 -> host X11.so qemu-native doesn't depend on libxext-native, so the error would happen if the libx11-native is being rebuilding and the host's libX11.so doesn't have _XEatDataWords. Manually reproduce it on Ubuntu 12.04 x86_64: $ bitbake qemu-native libx11-native libxext-native $ bitbake qemu-native libx11-native -ccleansstate && bitbake qemu-native Note, only qemu-native has this problem since libxext depends on libX11, and SDL would depend on libxext when x11 is enabled. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-29package: Correct two typos in a commentPeter Kjellerstedt
This quite coincidentally invalidates the sstate for do_package which is needed due to the correction of oe.utils.multiprocess_exec(). Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-29lib/oe/utils: Make multiprocess_exec() return anythingPeter Kjellerstedt
The variable "results" was accidentally used for multiple different things at the same time, which unintentionally discarded anything that was supposed to be returned from the function... Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-29oeqa: xorg log test is being replaced by parselogs so removeRichard Purdie
Now we have the parselogs test, this one can be removed. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-29testimage: Add parselogs to the default tests for sato imagesRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-29oeqa/pasrselogs: Improve the machine/string whitelistRichard Purdie
Currently the whitelist is imcomplete, inaccurate and suffers duplication. These changes: * Add common groups of errors * Change to make the default whitelist clear * Correctly (or at least better) escape the regexp expressions * Add in missing machines to allow builds on the autobuilder to suceed Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-29oeqa/runtime: Automatic test for parsing the logs on a machine and search ↵Lucian Musat
for certain error keywords. This adds a common new qa test for general processing of log files. One significant improvement is machine dependent ignore filters. This can be used to replace several weaker individual QA tests that are currently used. Signed-off-by: Lucian Musat <georgex.l.musat@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-29classes/cpan_build.bbclass: add EXTRA_CPAN_BUILD_FLAGSTim Orling
Some packages have additional configuration options that are currently not accessible through cpan_build.bbclass. Similar to cpan.bbclass, add EXTRA_CPAN_BUILD_FLAGS to pass the optional parameters to perl Build.PL. Signed-off-by: Tim Orling <TicoTimo@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-29buildtools-tarball: export GIT_SSL_CAINFOFahad Usman
export GIT_SSL_CAINFO so git can find the certs Signed-off-by: Fahad Usman <fahad.usman@gmail.com> Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-29buildtools-tarball: include nativesdk-ca-certificatesFahad Usman
nativesdk-ca-certificates is needed in order to support oe/yocto builds with buildtools-tarball on old hosts, as we provide libcurl, and that needs to be able to find the certs, and there's no standard path or bundle path, so we can't rely on the host. Signed-off-by: Fahad Usman <fahad.usman@gmail.com> Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-29lttng-tools: fix ptest execution failureChong Lu
Ptest will hang when execute "./run.sh fast_regression" and lttng background daemon can't be killed normally. This patch fixes this issue and use ${PTEST_PATH} instead of long path. Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-28populate_sdk_base: Remap TOOLCHAIN_HOST_TASK variableRichard Purdie
Currently this variable isn't passed through the magic rename mangling. This means that if you try adding "nativesdk-eglibc" to an image directly, you can't since the package is renamed by debian.bbclass and nothing sees the renaming. This is annoying since I wanted to exactly that. This code change passes it through the standard renaming function, the tricky part is that we have to set PKGDATA_DIR to point to the correct sysroot during the call. We create a copy of the datastore for the purposes of the call to do this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-28python3-distribute: fix interpreterRobert Yang
It should use "/usr/bin/env python3" rather than python. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-28bootchart2: no bashism in bootchartd.inRobert Yang
So use /bin/sh Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-16 10:41:22 +0000