aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* rootfs.py: change the logic in _uninstall_unneededChenQi/rootfs-postinstsChen Qi2014-06-111-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | Previously, if we have 'package-management' and 'read-only-rootfs' both in IMAGE_FEATRUES, we would meet the following error at system start-up. rm: can't remove '/etc/rcS.d/S99run-postinsts': Read-only file system However, what's really expected is that when there's no postinstall script at system start-up, the /etc/rcS.d/S99run-postinsts should not even be there. Whether or not to remove the init script symlinks to run-postinsts should not depend on whether we have 'package-management' in IMAGE_FEATURES; rather, it should only depend on whether we have any postinstall script left to run at system start-up. This patch changes the _uninstall_unneeded function based on the logic stated above. [YOCTO #6257] Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
* Revert "fontconfig: enable 64 bit file support"Ross Burton2014-06-101-2/+0
| | | | | | | | | | Fontconfig doesn't need to be passed large file flags through CPPFLAGS because it's configure script uses AC_SYS_LARGEFILE. This reverts commit 5a49a24d35794fcf9e3895469a67db992a52305e. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* update-rc.d: Allow to use different initscripts providerMartin Jansa2014-06-101-1/+2
| | | | | | | | | * until now all recipes were respecting VIRTUAL-RUNTIME_initscripts variable but commit bba835fed88c3bd5bb5bd58962034aef57c408d8 hardcoded "initscripts" runtime dependency Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* nfs-utils: unset CFLAGS for testlk buildChong Lu2014-06-102-1/+34
| | | | | | | | | testlk is built with host gcc at do_compile stage, which leads to unrecognized some flags for special architecture. So unset CFLAGS for testlk to make sure it passed. Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* oe-core/init-install.sh: do not overwrite /etc/mtab if the link already existShan Hai2014-06-101-1/+3
| | | | | | | | | | | | Overwriting of /etc/mtab would fail as below if the /etc/mtab link already exist during installation phase, this patch fix this problem by checking existance of the link before try to overwrite it. Error message during installation if the /etc/mtab exists: "cat: /proc/mounts: input file is output file Signed-off-by: Shan Hai <shan.hai@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* oprofile: Add PTEST regression testing to oprofileChong Lu2014-06-103-2/+145
| | | | | | | | | | | | | | | | | | The commit changes the oe-core oprofile recipe by adding the PTEST interface, implementing do_compile_ptest() and do_install_ptest(). The install routine adds several files that only the regression tests require. Also, a patch is necessary to inhibit executing the tests on the build host and to point to the correct target directory for the libutil++ test 'file-manip-tests'. That test requires the recipe to set SRCDIR in the build environment instead of determining the value from build-time host paths as for a self-hosted build. Signed-off-by: Dave Lerner <dave.lerner@windriver.com> Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* gawk: remove dgawk and pgawk packages, merge gawk-common into gawkRoss Burton2014-06-101-9/+1
| | | | | | | | | | | The dgawk and pgawk commands no longer exist in gawk 4.1 onwards, replaced by options to gawk. Remove the dgawk and pgawk binary packages, and merge gawk-common into gawk as it is needless splitting. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* gawk: fix module pathsRoss Burton2014-06-101-2/+2
| | | | | Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* libgcrypt: fix do_configure failedRobert Yang2014-06-101-1/+1
| | | | | | | | | | Fixed: rm: cannot remove `/path/libgcrypt-1.6.1/m4/*.m4': No such file or directory We would meet this error if we stop the configure and run again. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* python-gst: link python shared library to config directoryyanjun.zhu2014-06-101-0/+6
| | | | | | | python-gst needs python shared library in python config directory. Signed-off-by: yanjun.zhu <yanjun.zhu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* xorg-font-common.inc: remove shell debug optionKai Kang2014-06-101-1/+0
| | | | | | | | | | 'set -x' is added to package postinstall scripts. It causes trace information are printed when image first time boots such as core-image-sato. Remove it. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* oeqa/utils/commands.py: add support for postconfig optionCorneliu Stoicescu2014-06-101-9/+22
| | | | | | | | | | | | | | | Adding support for postconfig option to the bitbake() and related methods. This enables us to use 'bitbake -R postconfig_file <command>'. Usage: bitbake(cmd, postconfig="some confguration") 'postconfig_file' would contain what we add in 'postconfig' Other methods affected: get_bb_env(), get_bb_var() Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* gawk: fix libexec of the old 3.1.5 versionChen Qi2014-06-101-2/+2
| | | | | | | | ${libexec} doesn't necessarily equals to ${libdir}/${BPN}. So fix this problem by using ${libdir}/${BPN} in FILES variable. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* libgcrypt: workaround ICE failure on mips with '-O -g'Hongxu Jia2014-06-102-1/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hit a ICE and could reduce it to the following minimal example: 1. Only the size of array assigned with 2 caused the issue: $ cat > mipgcc-test.c << END int main (int argc, char **argv) { char *pStrArry[ARRAY_SIZE_MAX] = {"hello"}; int i = 0; while(pStrArry[i] && i<ARRAY_SIZE_MAX) { printf("%s\n", pStrArry[i]); i++; } return 0; } END 2. Only -O1 and -g on mips caused the issue: $ mips-poky-linux-gcc -O1 -g -o mipgcc-test mipgcc-test.c mipgcc-test.c: In function 'main': mipgcc-test.c:18:1: internal compiler error: in dwarf2out_var_location, at dwarf2out.c:20810 } ^ Please submit a full bug report, with preprocessed source if appropriate. See <http://gcc.gnu.org/bugs.html> for instructions [YOCTO #6034] 3. The quick workround is trying to enlarge the size of array with larger than 2. 4. File a bug to GNU, but it could not be reproduced on there environment. http://gcc.gnu.org/bugzilla/show_bug.cgi?id=60643 Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* xorg-xserver: disable DRI3 by defaultRoss Burton2014-06-101-0/+1
| | | | | | | | | | | Add a PACKAGECONFIG for DRI3 but don't enable it yet. Based on a patch by Valentin Popa <valentin.popa@intel.com>. [YOCTO #6402] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mesa: upgrade to 10.1.3Valentin Popa2014-06-104-14/+22
| | | | | | | | | | | | | | libdricore was removed and replaced with a megadriver with hardlinks from the old driver names. Add PACKAGECONFIG for DRI3 but disable by default as there are currently regressions compared to DRI2. License is unchanged. Signed-off-by: Valentin Popa <valentin.popa@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mesa: add build-dependency on libxml2-nativeRoss Burton2014-06-101-1/+1
| | | | | | | | glapi/gen needs the libxml2 Python module, but this isn't listed as a build dependency. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* glib-2.0: fix paths to test binariesRoss Burton2014-06-101-1/+1
| | | | | | | | The tests are installed to $libexecdir not $libdir/glib-2.0. By default these are the same location but they can be changed independently. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gdk-pixbuf: fix paths to test binariesRoss Burton2014-06-101-1/+1
| | | | | | | | The tests are installed to $libexecdir not $libdir/gdk-pixbuf. By default these are the same location but they can be changed independently. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* openssl: fix ptestsPaul Eggleton2014-06-093-1/+33
| | | | | | | | | | | Add some missing dependencies and fix the Makefile in order to get most of the ptest tests working (specifically test_bn, test_verify, test_cms, test_srp and test_heartbeat). test_verify still fails for unknown reasons (perhaps some of the now expired certificates weren't meant to have expired as far as the test is concerned?) but at least it has the certificates to run now. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* openssl: upgrade to 1.0.1hPaul Eggleton2014-06-095-453/+48
| | | | | | | | | | | | | | | | | | | Fixes the following security issues: * CVE-2014-0224 * CVE-2014-0221 * CVE-2014-0195 * CVE-2014-3470 The patch for CVE-2010-5298, CVE-2014-0198 and a fix for building the documentation are integrated upstream in this release and so were dropped. Additionally, a patch from upstream was added in order to fix a failure during do_compile_ptest_base. A similar upgrade was also submitted by Yao Xinpan <yaoxp@cn.fujitsu.com> and Lei Maohui <leimaohui@cn.fujitsu.com>. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* wic: check if BBLAYERS is valid before useJoão Henrique Ferreira de Freitas2014-06-062-6/+8
| | | | | | | | | | If wic is running as raw mode, it's better to check if BBLAYERS is valid before inspect it. No functional changes. Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* wic: default plugin type directory should be added only onceJoão Henrique Ferreira de Freitas2014-06-061-2/+2
| | | | | | | | | | Fix 'for' statement identention so plugin type directory will be added only once in layers_dirs list. No functional changes. Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gnutls: upgrade to 3.2.15Valentin Popa2014-06-062-7/+7
| | | | | Signed-off-by: Valentin Popa <valentin.popa@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* busybox: put udhcpc in backgroundSaul Wold2014-06-061-0/+1
| | | | | | | | | If the interface is slow to come up udhcpc will continue in the background [YOCTO #6339] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* update-rc.d/useradd: Add additional dependeciesSaul Wold2014-06-062-1/+3
| | | | | | | | | | | These dependcies are needed to ensure that thier packages are created correctly since these classes have runtime dependiences in their packages but they are not actually created yet at rootfs time. [YOCTO #6072] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* generate-manifest-2.7.py: Add importlibMatt Fleming2014-06-062-5/+11
| | | | | | | | | importlib isn't currently included in any of the python packages, so create a new one for recipes that require it. Cc: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* autogen-native: upgrade from 2.18.2 to 2.18.3Chen Qi2014-06-062-3/+34
| | | | | | | | Upgrade autogen-native from 2.18.2 to 2.18.3. A patch is made to fix the compilation error. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* file: upgrade from 5.17 to 5.18Chen Qi2014-06-061-2/+2
| | | | | | | Upgrade file from 5.17 to 5.18. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub-2.00: remove our 40_customRoy Li2014-06-061-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | We have this in recipes-bsp/grub/grub/40_custom: [snip] menuentry "Linux" { set root=(hd0,1) linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet } [snip] These lines are only for initrdscripts/files/init-install.sh, the side effect is that it would make the target's grub-mkconfig doesn't work well since the 40_custom will be installed to /etc/grub.d/40_custom, the grub-mkconfig will run the 40_custom, and there will always be a 'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we can do this in init-install.sh rather than grub to fix the problem, which is also much simpler. We have done the related work in init-install.sh, now we need remove our own 40_custom, and use grub's own 40_custom which is the right one. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub-2.00: remove our 40_customRoy Li2014-06-063-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | We have this in recipes-bsp/grub/grub/40_custom: [snip] menuentry "Linux" { set root=(hd0,1) linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet } [snip] These lines are only for initrdscripts/files/init-install.sh, the side effect is that it would make the target's grub-mkconfig doesn't work well since the 40_custom will be installed to /etc/grub.d/40_custom, the grub-mkconfig will run the 40_custom, and there will always be a 'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we can do this in init-install.sh rather than grub to fix the problem, which is also much simpler. We have done the related work in init-install.sh, now we need remove our own 40_custom, and use grub's own 40_custom which is the right one. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fontconfig: enable 64 bit file supportSaul Wold2014-06-061-0/+2
| | | | | | | | | | | | | When running 32bit code on a large filessytem with 64bit inodes, the fontcache was not being created correctly because an EOVERFLOW was being returned from the fstat when reading the 64 inode on a 32bit system. The fontcache is created at rootfs time on the host system via qemu. [YOCTO #6338] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* freetype: enable 64 bit file supportSaul Wold2014-06-061-0/+2
| | | | | | | | | | | | | When running 32bit code on a large filessytem with 64bit inodes, the fontcache was not being created correctly because an EOVERFLOW was being returned from the fstat when reading the 64 inode on a 32bit system. The fontcache is created at rootfs time on the host system via qemu. [YOCTO #6338] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* autoconf: don't disable the autoheader warningsRoss Burton2014-06-062-16/+0
| | | | | | | | | | | | | | | | | | | The usual autoheader warning is due to AC_DEFINE variables not having a description. This results in no variable being defined in config.h, which leads to code behaving as if the test failed when it actually succeeded. This patch was introduced to OpenEmbedded back in 2004: http://git.openembedded.org/openembedded/commit/?id=5eab06d132cb2895fd579f5cedffbb54c27794f8 There is no rationale for the patch so I suspect this is due to the warnings being fatal and the submitter not understanding that the problem is more than cosmetic. (From OE-Core rev: de5fb9d7f60763082327ddeca71842c00a2fa23e) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libxml2: fix python packaging for nativesdkPaul Eggleton2014-06-062-1/+31
| | | | | | | | | | | | | We enable the python module in nativesdk-libxml2, but the python binary used is in the native sysroot and thus you get the module installed in the wrong path. Even with that fixed the python files are still unpackaged, so create an ${PN}-python package and add them to it. (This does not affect the libxml target build at all since python is disabled for that.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libarchive: avoid dependency on e2fsprogsPaul Eggleton2014-06-061-0/+11
| | | | | | | | | | | | | | | | | libarchive's configure script looks for ext2fs/ext2_fs.h in order to use some defines for file attributes support if present (but doesn't link to any additional libraries.) There is no configure option to disable this, and if e2fsprogs is rebuilding between do_configure and do_compile you can currently get a failure. Because it doesn't need anything else from e2fsprogs, and e2fsprogs isn't currently buildable for nativesdk anyway, copy the headers in from e2fsprogs-native which we're likely to have built already (and add it to DEPENDS just to be sure we have.) Fixes [YOCTO #6268]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* neard: fix for parallel buildRichard Purdie2014-06-062-0/+32
| | | | | | | | | | | | | | | for neard tools/snep-send object might cause a parallel build failure,due to undetected dependency on dbus.h header file. Patch will be submitted upstream. Fixes [YOCTO #6389]. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gawk: upgrade from 4.0.2 to 4.1.1Chen Qi2014-06-062-3/+4
| | | | | | | | Upgrade gawk from 4.0.2 to 4.1.1. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* generate-manifest-3.3.py: Add importlibMatt Fleming2014-06-062-3/+10
| | | | | | | | | | importlib isn't currently included in any of the python packages, so create a new one for recipes that require it. Cc: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-rtsp-server: Add recipe to support gst-rtsp-serverAlex J Lennon2014-06-062-0/+23
| | | | | | | | | | A Gstreamer library which provides an API to create an RTSP server (e.g. to stream RTP to VLC clients and similar). Tested, works with GStreamer 1.2.3 + videotestsrc based pipeline on RPi. Signed-off-by: Alex J Lennon <ajlennon@dynamicdevices.co.uk> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Added new test cases for bitbake modes (-e -n -p -r -R -c -k)Lucian Musat2014-06-061-0/+52
| | | | | | Signed-off-by: Lucian Musat <georgex.l.musat@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd: update a uclibc specific patch to avoid segment fault errorChen Qi2014-06-061-24/+32
| | | | | | | | | | | | | | | The alloca() function allocates space in the stack frame of the caller, so using alloca(new_size - old_size) would possibly crash the stack, causing a segment fault error. This patch fixes the above problem by avoiding using this function in journal-file.c. [YOCTO #6201] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* apr: upgrade to 1.5.1Hongxu Jia2014-06-062-3/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LICENSE has no change, except a newline added. Fix do_compile failed: | tools/gen_test_char > include/private/apr_escape_test_char.h | /bin/sh: tools/gen_test_char: No such file or directory | make[1]: *** [include/private/apr_escape_test_char.h] Error 127 The tools/gen_test_char was invoked at build time, and it didn't work for the cross compiling, so we built it with $BUILD_CC. To make sure there was no side effect on the change, not adding this patch, I did the test: 1. Built the native tools/gen_test_char on x86-64 host, and invoke it on that host; 2. Built the target tools/gen_test_char which arch was arm, and invoke it on the qemuarm; 3. Comparing the results, they were total the same; ... /* this file is automatically generated by gen_test_char, do not edit. "make include/private/apr_escape_test_char.h" to regenerate. */ static const unsigned char test_char_table[256] = { 32,30,30,30,30,30,30,30,30,30,31,30,30,30,30,30,30,30,30,30, 30,30,30,30,30,30,30,30,30,30,30,30,6,16,63,22,17,22,49,17, 17,17,1,16,16,0,0,18,0,0,0,0,0,0,0,0,0,0,16,23, 55,16,55,23,16,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,23,31,23,23,0,23,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,23,23,23,17,30,30,30,30,30,30,30,30,30,30,30,30,30, 30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30, 30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30, 30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30, 30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30, 30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30, 30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30 }; ... Fix do_install failed: | DEBUG: Executing shell function do_install | NOTE: make -j 16 DESTDIR=tmp/work/x86_64-linux/apr-native/1.5.1-r0/image install | tmp/work/x86_64-linux/apr-native/1.5.1-r0/apr-1.5.1/build/mkdir.sh tools | gcc -isystem/home/pokybuild/yocto-autobuilder/yocto-slave/build-appliance/ build/build/tmp/sysroots/x86_64-linux/usr/include -O2 -pipe tools/gen_test_char.c -o tools/gen_test_char | make[1]: Entering directory `tmp/work/x86_64-linux/apr-native/1.5.1-r0/ apr-1.5.1' | tmp/work/x86_64-linux/apr-native/1.5.1-r0/apr-1.5.1/build/mkdir.sh tools | gcc -isystem/home/pokybuild/yocto-autobuilder/yocto-slave/build-appliance/ build/build/tmp/sysroots/x86_64-linux/usr/include -O2 -pipe tools/gen_test_char.c -o tools/gen_test_char | tmp/work/x86_64-linux/apr-native/1.5.1-r0/apr-1.5.1/build/mkdir.sh include/private | tools/gen_test_char > include/private/apr_escape_test_char.h | /bin/sh: tools/gen_test_char: Permission denied Remove the 'tools' dir creation, it always existed. And it caused gen_test_char unexpected rebuilt at do_install time. Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* apr-util: upgrade to 1.5.3Hongxu Jia2014-06-061-2/+2
| | | | | | Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* readline-5.2: exclude autoheaderRoss Burton2014-06-062-0/+3
| | | | | | | | | | | | readline hand-maintains config.h.in so exclude autoheader and re-use a patch from readline-6.3 to fix a typo in variable names. See oe-core 8c37d32d6133c6ad2b9142e7a42775e7a979b570 against readline-6.3 for further rationale. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* readline-5.2: use upstream's aclocal.m4 as acinclude.m4Ross Burton2014-06-062-1817/+3
| | | | | | | | | | Instead of shipping a fork of the upstream aclocal.m4, simply rename it to acinclude.m4 at configure time. We don't need the fork now that autoheader is excluded. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grep: upgrade 2.18 to 2.19Chen Qi2014-06-061-2/+2
| | | | | | | | Upgrade grep from 2.18 to 2.19. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* clutter: update to 1.18.2Tim Orling2014-06-063-20/+10
| | | | | | | | | | | * Updated Ross's install-examples.patch to current ** AM_CPPFLAGS changes no longer needed ** example_DATA = ... redhand.png no longer needed ** minor line # changes Signed-off-by: Tim Orling <TicoTimo@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cogl: update to 1.18.0Tim Orling2014-06-064-42/+7
| | | | | | | | | | | | Announcement: http://lists.freedesktop.org/archives/cogl/2014-March/001636.html * License changed from LGPL to MIT * kms-include-stddef.h-before-drm.h.patch fixed upstream Signed-off-by: Tim Orling <TicoTimo@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mesa-demos: Use DEMOS_DATA_DIR.Drew Moseley2014-06-062-1/+236
| | | | | | | | | Modify mesa demo apps to respect the DEMOS_DATA_DIR configuration parameter for locating data files. Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>