| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Without this, you are not able to use mips32r2 on a mips64 based tune.
We want to be able to do a tri-lib system of mips64, mips64-n32 and mips32r2.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fix an issue on a multilib configuration that contains more then 1 multilib.
I.e. on MIPS64:
DEFAULTTUNE = "mips64"
MULTILIBS = "lib32n:mips64_n32 lib32:mips32"
While normally you'd use 'libn32', the above is legal.
With the startswith code, the system will look to expand the 'lib32' element
and find the 'lib32n' instead, and will result in a warning:
lib32 doesn't have a corresponding tune. Skipping...
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When attempting to use a binary toolchain, such as meta-mentor,
we want the ability to verify that the CCARGS, ASARGS and LDARGS
contain the necessary and appropriate flags.
This change specifically verifies, if set:
TUNEABI_REQUIRED_CCARGS_tune-<tune>
TUNEABI_REQUIRED_ASARGS_tune-<tune>
TUNEABI_REQUIRED_LDARGS_tune-<tune>
Each of these, will be processed by the class and verified that the
selected tune's CCARGS, ASARGS, and LDARGS contains the listed item. This
can be used to validate that the user has not accidently or otherwise
missed an argument. Note, conflicting arguments are not verified.
Without verification it's possible for a misconfiguration to go
undetected, presenting runtime and debugging errors.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This is needed in case the boot disk was created with mkdiskimage.
In that case the parameter passed is a variant of /dev/sda4 which
includes the partition number. Without this change this install script
will offer to install onto the live media.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Some mmc cards do not have all the data files in /sys/block
populated. Check for existence before displaying the files
to avoid erroring out of the install process.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Drop patches which are already available in 4.9.1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When using the RPM packaging backend to generate a rootfs there needs to
be a way to configure the preferred ABI to resolve ELF file conflicts.
Currently RPM resolves ELF file conflicts with the last-installed wins.
Using SMART it's difficult to know what the last installed will be.
There are three specific policies that can be selected:
1: ELF32 wins
2: ELF64 wins
3: ELF64 N32 wins (mips64 or mips64el only)
Another option "0" is uncontrollable, which means that if two are being
installed at once Elf64 is preferred, but if they're being installed in
two different transactions, last in wins, so we don't document it.
Add RPM_PREFER_COLOR to let the user config the preferred ABI.
[YOCTO #4073]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Remove one patch and rebase another
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
An 'import os' was omitted here while testing the previous decorators using runtime tests that import the os module before this one. Unfortunately oe-selftest fails because of this missing import.
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Currently, if pkg-config isn't installed on the build system, this code
can cause an error. We don't need to require this, only use it if its
present so allow the test to fail gracefully.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* Backported patch removed, since it is already included in this release
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* eglglessink was replaced by glimagesink
* sndfile plugin has been ported to 1.0
* webp support added since libwep recipe has been added to meta-multimedia
* mfc was replaced by v4l2videodec, which does not need special flags
* cdaudio was removed
* directshow plugin was replaced by winks
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* xvideo options removed, since the V4L2 XV support never became upstream
and is pretty much dead now
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* Backported patch removed, since it is already included in this release
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
1. Updated the SRC_URI to http://dl.lm-sensors.org/i2c-tools/
2. Corrected the License to GPLv2+ as the "COPYING" file include these
statements:
"This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version."
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Previous commit removed non PN based -dev packages
but lack of upgrade path for alsa-dev.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When run smart, it fails:
root@qemu1:~# smart channel --remove-all
error: No action specified for command 'channel'
If no default value of arg 'dest' is provided in method add_option() of
optparse.OptionParser, it replaces hyphen('-') in new added option with
underscore('_') as dest.
In function ensure_action() it checks action strings with options from
optparse.OptionParser. So it is 'remove_all' which need to be checked
rather than 'remove-all'.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
A -native variant of python-pycairo will be necessary for running the native
version of pybootchartgui. It may also come in handy for running other Python
utilities from the native sysroot.
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Modify the read_only_rootfs_hook function to make it also have effect
on systemd based systems.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This services generated from volatile-binds.bb recipe file only have
effect in a read-only filesystem. So if the rootfs is read-write, the
related service are not started.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This recipe is designed to play a key role in a read-only rootfs
of systemd based systems. It generates service files from a template,
volatile-binds.service.in and the VOLATILE_BINDS variable.
By default, VOLATILE_BINDS takes the value of "/var/volatile/lib /var/lib\n",
which leads to the generation of volatile-var-lib.service file.
This file doesn't have any effect in a read-write system, as it
has "ConditionPathIsReadWrite = !/var/lib" in the [Unit] section.
In other words, this file only has effect in a read-only rootfs.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The initrd image used by the Linux kernel is list of file system images
concatenated together and presented as a single initrd file at boot time.
So far the initrd is a single filesystem image. But in cases like to support
early microcode loading, the initrd image need to have multiple filesystem
images concatenated together.
This commit is extending the INITRD variable from a single filesystem image
to a list of filesystem images to satisfy the need mentioned above.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a set of miscellaneous help text updates noticed while
transcribing wic help for the dev manual.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
squashfs support was recently added to wic, so document it.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
--fsoptions support was recently added to wic, so document it.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fix various typoes and grammar problems noticed while transcribing for
the dev manual.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The modern kernels may not support IDE (CONFIG_IDE=y), but it should
support SCSI in most of the cases. The boot-directdisk.bbclass uses
sda, too.
Remove an extra space from image-live.bbclass and image-vmdk.bbclass to
not confuse the user.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The gcc-ar.o, gcc-nm.o, gcc-ranlib.o and errors.o included
config.h which was a generated file. But no explicity rule
to clarify the dependency. There was potential building
failure while parallel make.
For gcc-ar.o, gcc-nm.o and gcc-ranlib.o, they were compiled from one C
source file gcc-ar.c, we add them to ALL_HOST_BACKEND_OBJS, so the
'$(ALL_HOST_OBJS) : | $(generated_files)' rule could work for these
objects.
For errors.o, it is part of gengtype, and the gengtype generator program
is special: Two versions are built. One is for the build machine, and one
is for the host. We refered what gengtype-parse.o did (which also is part
of gengtype).
[YOCTO #6568]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
"man grep" on centos:
-R, -r, --recursive
Read all files under each directory, recursively; this is equivalent to the -d recurse option.
"man grep" on a more recent ubuntu system:
-r, --recursive
Read all files under each directory, recursively, following symbolic links only if they are on the command line. This
is equivalent to the -d recurse option.
So we have an issue when the SDK installer (even with
buildtools-tarball) is used on old hosts since it may try and
dereference paths which it should not. This is caused by differences in
the behaviour of grep -r on older systems.
The fix is to wrap this in find so that only real files are found (as
elsewhere in the script.
[YOCTO #6577]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The -ccleansstate should be done before building the package for the second time.
Also printing the command output when failing.
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a check for NULL on dereferencing the xim pointer.
Using mplayer with the x11 backend will trigger this and result
in a segfault.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If used with some packages using kconfig mechanism, the diffconfig
command generates wrong output format. Diff provides all options to
format the output correctly. This method formats as intended, is more
robust and works with the merge_config.h script from yocto-kernel-tools.
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
the patch comes from:
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2013-5606
https://bugzilla.mozilla.org/show_bug.cgi?id=910438
http://hg.mozilla.org/projects/nss/rev/d29898e0981c
The CERT_VerifyCert function in lib/certhigh/certvfy.c in
Mozilla Network Security Services (NSS) 3.15 before 3.15.3 provides
an unexpected return value for an incompatible key-usage certificate
when the CERTVerifyLog argument is valid, which might allow remote
attackers to bypass intended access restrictions via a crafted certificate.
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The pa_rtp_recv function in modules/rtp/rtp.c in the module-rtp-recv module
in PulseAudio 5.0 and earlier allows remote attackers to cause a denial of
service (assertion failure and abort) via an empty UDP packet.
Fix it by picking a patch from pulseaudio upstream code.
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In commit b0df35f47fb79dc149504bd66d1186b3276f9510
("base-files: Add to make some directories needed by LSB.") there
were new groupings of dirs made. But rather than keep the grouping
names permissions based as they clearly were, it seems that it was
unfortunately misinterpreted as a counter, simply incrementing as
a new group was added.
This leads to dir3755 getting chmod'd to 0755 and dir4775 being
chmod'd to 2775 which to any new reader of the code is terribly
confusing.
Choose names that clearly reflect the permissions, and add a lsb
suffix to indicate the role.
Also note that the settings for /var/mail seem incorrect, and so
they have been aligned with what is seen in most common distros.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Mark Hatle did the historical research into why this was so,
and found that it originally was via debian import, and then
it morphed over time:
<fray> +# chown -R root:root ${D}
<fray> +# cd ${D} && chown root:src usr/src
<fray> +# cd ${D} && chown root:staff var/local
<fray> +# cd ${D} && chown root:staff home
<fray> + cd ${D} && chmod 755 `find . -type d`
<fray> + cd ${D} && chmod 1777 `cat ${S}/debian/1777-dirs`
<fray> + cd ${D} && chmod 2775 `cat ${S}/debian/2775-dirs`
<fray> that was the original code
<fray> so THAT is why they're 2775..
<fray> they were original 'src' and 'staff'.. which has gotten lost
sometime in the last 10 years
<fray> AND the origin:
<fray> commit b45c9ed40bb4f893f99127a21776aef3ae888ad7
<fray> Author: Chris Larson <clarson@kergoth.com>
<fray> Date: Tue Sep 30 16:30:41 2003 +0000
<fray> Add base-files 3.0.10 (from debian).
<fray> thats where the brain damage started ... Debian in 2003..
Here we simply convert them to being normal 755 dirs.
[YOCTO #6579]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Nothing interesting to see in the git history ; appears to have
been this way since its creation.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Switches must not be in EXTRA_OECONF anymore.
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since 2004 we've been carrying a patch[1] make autoreconf pass --foreign to
automake. Presumably at the time this was due to many upstreams using
hand-coded bootstrap scripts that passed --foreign manually, but we were using
autoreconf. These days many projects have added foreign to AM_INIT_AUTOMAKE and
use autoreconf directly, so this patch isn't as critical as it used to be.
Signed-off-by: Ross Burton <ross.burton@intel.com>
[1] oe-classic 2ab2a92eadaf2f80410d8746099f8a9b1b81ff91
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #6493]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes the following build error:
,----
| .../configure: line 4229: syntax error near unexpected token `DIRECTFB,'
| .../configure: line 4229: `PKG_CHECK_MODULES(DIRECTFB, directfb >= $DIRECTFB_REQUIRED_VERSION, WATER=`$PKG_CONFIG --variable=water directfb` ,'
`----
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If building with SDKMACHINE=i686 and using the deb backend, populate_sdk
would fail. Its clear when looking at the options that the 32 bit values
were overwritten.
Replace this code with code similar to that used in package_deb itself.
[YOCTO #6458]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Martin Jansa
Mark Hatle
Drew Moseley
Khem Raj
Robert Yang
Saul Wold
Corneliu Stoicescu
Richard Purdie
Carlos Rafael Giani
Maxin B. John
Jackie Huang
Kai Kang
Max Eliaser
Chen Qi
Nitin A Kamble
Tom Zanussi
Hongxu Jia
Stefan Müller-Klieser
Li Wang
Shan Hai
Paul Gortmaker
Matthieu Crapet
Ross Burton
Otavio Salvador