<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >

<chapter id='ref-bitbake'>

    <title>BitBake</title>

    <para>
        BitBake is a program written in Python that interprets the
        <ulink url='&YOCTO_DOCS_DEV_URL;#metadata'>Metadata</ulink> used by
        the OpenEmbedded build system.
        At some point, developers wonder what actually happens when you enter:
        <literallayout class='monospaced'>
     $ bitbake core-image-sato
        </literallayout>
    </para>

    <para>
        This chapter provides an overview of what happens behind the scenes from BitBake's perspective.
    </para>

    <note>
        BitBake strives to be a generic "task" executor that is capable of handling complex dependency relationships.
        As such, it has no real knowledge of what the tasks being executed actually do.
        BitBake just considers a list of tasks with dependencies and handles 
        <ulink url='&YOCTO_DOCS_DEV_URL;#metadata'>Metadata</ulink>
        consisting of variables in a certain format that get passed to the tasks.
    </note>

    <section id='ref-bitbake-parsing'>
        <title>Parsing</title>

        <para>
            BitBake parses configuration files, classes, and <filename>.bb</filename> files.
        </para>

        <para>
            The first thing BitBake does is look for the <filename>bitbake.conf</filename> file.
            This file resides in the
            <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>
            within the <filename>meta/conf/</filename> directory.
            BitBake finds it by examining its
            <link linkend='var-BBPATH'><filename>BBPATH</filename></link> environment
            variable and looking for the <filename>meta/conf/</filename>
            directory.
        </para>

        <para>
            The <filename>bitbake.conf</filename> file lists other configuration
            files to include from a <filename>conf/</filename>
            directory below the directories listed in <filename>BBPATH</filename>.
            In general, the most important configuration file from a user's perspective
            is <filename>local.conf</filename>, which contains a user's customized
            settings for the OpenEmbedded build environment.
            Other notable configuration files are the distribution
            configuration file (set by the
            <filename><link linkend='var-DISTRO'>DISTRO</link></filename> variable)
            and the machine configuration file
            (set by the
            <filename><link linkend='var-MACHINE'>MACHINE</link></filename> variable).
            The <filename>DISTRO</filename> and <filename>MACHINE</filename> BitBake environment
            variables are both usually set in
            the <filename>local.conf</filename> file.
            Valid distribution
            configuration files are available in the <filename>meta/conf/distro/</filename> directory
            and valid machine configuration
            files in the <filename>meta/conf/machine/</filename> directory.
            Within the <filename>meta/conf/machine/include/</filename>
            directory are various <filename>tune-*.inc</filename> configuration files that provide common
            "tuning" settings specific to and shared between particular architectures and machines.
        </para>

        <para>
            After the parsing of the configuration files, some standard classes are included.
            The <filename>base.bbclass</filename> file is always included.
            Other classes that are specified in the configuration using the
            <filename><link linkend='var-INHERIT'>INHERIT</link></filename>
            variable are also included.
            Class files are searched for in a <filename>classes</filename> subdirectory
            under the paths in <filename>BBPATH</filename> in the same way as
            configuration files.
        </para>

        <para>
            After classes are included, the variable
            <filename><link linkend='var-BBFILES'>BBFILES</link></filename>
            is set, usually in
            <filename>local.conf</filename>, and defines the list of places to search for
            <filename>.bb</filename> files.
            By default, the <filename>BBFILES</filename> variable specifies the
            <filename>meta/recipes-*/</filename> directory within Poky.
            Adding extra content to <filename>BBFILES</filename> is best achieved through the use of
            BitBake layers as described in the
            "<ulink url='&YOCTO_DOCS_DEV_URL;#understanding-and-creating-layers'>Understanding and
            Creating Layers</ulink>" section of the Yocto Project Development Manual.
        </para>

        <para>
            BitBake parses each <filename>.bb</filename> file in <filename>BBFILES</filename> and
            stores the values of various variables.
            In summary, for each <filename>.bb</filename>
            file the configuration plus the base class of variables are set, followed
            by the data in the <filename>.bb</filename> file
            itself, followed by any inherit commands that
            <filename>.bb</filename> file might contain.
        </para>

        <para>
            Because parsing <filename>.bb</filename> files is a time
            consuming process, a cache is kept to speed up subsequent parsing.
            This cache is invalid if the timestamp of the <filename>.bb</filename>
            file itself changes, or if the timestamps of any of the include,
            configuration files or class files on which the
            <filename>.bb</filename> file depends change.
        </para>
    </section>

    <section id='ref-bitbake-providers'>
        <title>Preferences and Providers</title>

        <para>
            Once all the <filename>.bb</filename> files have been
            parsed, BitBake starts to build the target (<filename>core-image-sato</filename>
            in the previous section's example) and looks for providers of that target.
            Once a provider is selected, BitBake resolves all the dependencies for
            the target.
            In the case of <filename>core-image-sato</filename>, it would lead to
            <filename>packagegroup-core-x11-sato</filename>,
            which in turn leads to recipes like <filename>matchbox-terminal</filename>,
            <filename>pcmanfm</filename> and <filename>gthumb</filename>.
            These recipes in turn depend on <filename>eglibc</filename> and the toolchain.
        </para>

        <para>
            Sometimes a target might have multiple providers.
            A common example is "virtual/kernel", which is provided by each kernel package.
            Each machine often selects the best kernel provider by using a line similar to the
            following in the machine configuration file:
        </para>

        <literallayout class='monospaced'>
     PREFERRED_PROVIDER_virtual/kernel = "linux-yocto"
        </literallayout>

        <para>
            The default <filename><link linkend='var-PREFERRED_PROVIDER'>PREFERRED_PROVIDER</link></filename>
            is the provider with the same name as the target.
        </para>

        <para>
            Understanding how providers are chosen is made complicated by the fact
            that multiple versions might exist.
            BitBake defaults to the highest version of a provider.
            Version comparisons are made using the same method as Debian.
            You can use the
            <filename><link linkend='var-PREFERRED_VERSION'>PREFERRED_VERSION</link></filename>
            variable to specify a particular version (usually in the distro configuration).
            You can influence the order by using the
            <filename><link linkend='var-DEFAULT_PREFERENCE'>DEFAULT_PREFERENCE</link></filename>
            variable.
            By default, files have a preference of "0".
            Setting the <filename>DEFAULT_PREFERENCE</filename> to "-1" makes the
            package unlikely to be used unless it is explicitly referenced.
            Setting the <filename>DEFAULT_PREFERENCE</filename> to "1" makes it likely the package is used.
            <filename>PREFERRED_VERSION</filename> overrides any <filename>DEFAULT_PREFERENCE</filename> setting.
            <filename>DEFAULT_PREFERENCE</filename> is often used to mark newer and more experimental package
            versions until they have undergone sufficient testing to be considered stable.
        </para>

        <para>
            In summary, BitBake has created a list of providers, which is prioritized, for each target.
        </para>
    </section>

    <section id='ref-bitbake-dependencies'>
        <title>Dependencies</title>

        <para>
            Each target BitBake builds consists of multiple tasks such as
            <filename>fetch</filename>, <filename>unpack</filename>,
            <filename>patch</filename>, <filename>configure</filename>,
            and <filename>compile</filename>.
            For best performance on multi-core systems, BitBake considers each task as an independent
            entity with its own set of dependencies.
        </para>

        <para>
            Dependencies are defined through several variables.
            You can find information about variables BitBake uses in the BitBake documentation,
            which is found in the <filename>bitbake/doc/manual</filename> directory within the
            <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>.
            At a basic level, it is sufficient to know that BitBake uses the
            <filename><link linkend='var-DEPENDS'>DEPENDS</link></filename> and
            <filename><link linkend='var-RDEPENDS'>RDEPENDS</link></filename> variables when
            calculating dependencies.
        </para>
    </section>

    <section id='ref-bitbake-tasklist'>
        <title>The Task List</title>

        <para>
            Based on the generated list of providers and the dependency information,
            BitBake can now calculate exactly what tasks it needs to run and in what
            order it needs to run them.
            The build now starts with BitBake forking off threads up to the limit set in the
            <filename><link linkend='var-BB_NUMBER_THREADS'>BB_NUMBER_THREADS</link></filename> variable.
            BitBake continues to fork threads as long as there are tasks ready to run,
            those tasks have all their dependencies met, and the thread threshold has not been
            exceeded.
        </para>

        <para>
            It is worth noting that you can greatly speed up the build time by properly setting
            the <filename>BB_NUMBER_THREADS</filename> variable.
            See the
            "<ulink url='&YOCTO_DOCS_QS_URL;#building-image'>Building an Image</ulink>"
            section in the Yocto Project Quick Start for more information.
        </para>

        <para>
            As each task completes, a timestamp is written to the directory specified by the
            <filename><link linkend='var-STAMP'>STAMP</link></filename> variable.
            On subsequent runs, BitBake looks within the <filename>/build/tmp/stamps</filename>
            directory and does not rerun
            tasks that are already completed unless a timestamp is found to be invalid.
            Currently, invalid timestamps are only considered on a per
            <filename>.bb</filename> file basis.
            So, for example, if the configure stamp has a timestamp greater than the
            compile timestamp for a given target, then the compile task would rerun.
            Running the compile task again, however, has no effect on other providers
            that depend on that target.
            This behavior could change or become configurable in future versions of BitBake.
        </para>

        <note>
            Some tasks are marked as "nostamp" tasks.
            No timestamp file is created when these tasks are run.
            Consequently, "nostamp" tasks are always rerun.
        </note>
    </section>

    <section id='ref-bitbake-runtask'>
        <title>Running a Task</title>

        <para>
            Tasks can either be a shell task or a Python task.
            For shell tasks, BitBake writes a shell script to
            <filename>${WORKDIR}/temp/run.do_taskname.pid</filename> and then executes the script.
            The generated shell script contains all the exported variables, and the shell functions
            with all variables expanded.
            Output from the shell script goes to the file <filename>${WORKDIR}/temp/log.do_taskname.pid</filename>.
            Looking at the expanded shell functions in the run file and the output in the log files
            is a useful debugging technique.
        </para>

        <para>
            For Python tasks, BitBake executes the task internally and logs information to the
            controlling terminal.
            Future versions of BitBake will write the functions to files similar to the way
            shell tasks are handled.
            Logging will be handled in a way similar to shell tasks as well.
        </para>

        <para>
            Once all the tasks have been completed BitBake exits.
        </para>

        <para>
            When running a task, BitBake tightly controls the execution environment
            of the build tasks to make sure unwanted contamination from the build machine
            cannot influence the build.
            Consequently, if you do want something to get passed into the build
            task's environment, you must take a few steps:
            <orderedlist>
                <listitem><para>Tell BitBake to load what you want from the environment
                    into the data store.
                    You can do so through the <filename>BB_ENV_EXTRAWHITE</filename>
                    variable.
                    For example, assume you want to prevent the build system from
                    accessing your <filename>$HOME/.ccache</filename> directory.
                    The following command tells BitBake to load
                    <filename>CCACHE_DIR</filename> from the environment into the data
                    store:
                    <literallayout class='monospaced'>
     export BB_ENV_EXTRAWHITE="$BB_ENV_EXTRAWHITE CCACHE_DIR"
                    </literallayout></para></listitem>
                <listitem><para>Tell BitBake to export what you have loaded into the
                    environment store to the task environment of every running task.
                    Loading something from the environment into the data store
                    (previous step) only makes it available in the datastore.
                    To export it to the task environment of every running task,
                    use a command similar to the following in your
                    <filename>local.conf</filename> or distro configuration file:
                    <literallayout class='monospaced'>
     export CCACHE_DIR
                    </literallayout></para></listitem>
            </orderedlist>
        </para>

        <note>
            A side effect of the previous steps is that BitBake records the variable
            as a dependency of the build process in things like the shared state
            checksums.
            If doing so results in unnecessary rebuilds of tasks, you can whitelist the
            variable so that the shared state code ignores the dependency when it creates
            checksums.
            For information on this process, see the <filename>BB_HASHBASE_WHITELIST</filename>
            example in the "<link linkend='checksums'>Checksums (Signatures)</link>" section.
        </note>
    </section>

    <section id='ref-bitbake-commandline'>
        <title>BitBake Command Line</title>

        <para>
            Following is the BitBake help output:
        </para>

        <screen>
$ bitbake --help
Usage: bitbake [options] [package ...]

Executes the specified task (default is 'build') for a given set of BitBake files.
It expects that BBFILES is defined, which is a space separated list of files to
be executed.  BBFILES does support wildcards.
Default BBFILES are the .bb files in the current directory.

Options:
  --version             show program's version number and exit
  -h, --help            show this help message and exit
  -b BUILDFILE, --buildfile=BUILDFILE
                        execute the task against this .bb file, rather than a
                        package from BBFILES. Does not handle any
                        dependencies.
  -k, --continue        continue as much as possible after an error. While the
                        target that failed, and those that depend on it,
                        cannot be remade, the other dependencies of these
                        targets can be processed all the same.
  -a, --tryaltconfigs   continue with builds by trying to use alternative
                        providers where possible.
  -f, --force           force run of specified cmd, regardless of stamp status
  -c CMD, --cmd=CMD     Specify task to execute. Note that this only executes
                        the specified task for the providee and the packages
                        it depends on, i.e. 'compile' does not implicitly call
                        stage for the dependencies (IOW: use only if you know
                        what you are doing). Depending on the base.bbclass a
                        listtasks tasks is defined and will show available
                        tasks
  -r PREFILE, --read=PREFILE
                        read the specified file before bitbake.conf
  -R POSTFILE, --postread=POSTFILE
                        read the specified file after bitbake.conf
  -v, --verbose         output more chit-chat to the terminal
  -D, --debug           Increase the debug level. You can specify this more
                        than once.
  -n, --dry-run         don't execute, just go through the motions
  -S, --dump-signatures
                        don't execute, just dump out the signature
                        construction information
  -p, --parse-only      quit after parsing the BB files (developers only)
  -s, --show-versions   show current and preferred versions of all packages
  -e, --environment     show the global or per-package environment (this is
                        what used to be bbread)
  -g, --graphviz        emit the dependency trees of the specified packages in
                        the dot syntax
  -I EXTRA_ASSUME_PROVIDED, --ignore-deps=EXTRA_ASSUME_PROVIDED
                        Assume these dependencies don't exist and are already
                        provided (equivalent to ASSUME_PROVIDED). Useful to
                        make dependency graphs more appealing
  -l DEBUG_DOMAINS, --log-domains=DEBUG_DOMAINS
                        Show debug logging for the specified logging domains
  -P, --profile         profile the command and print a report
  -u UI, --ui=UI        userinterface to use
  -t SERVERTYPE, --servertype=SERVERTYPE
                        Choose which server to use, none, process or xmlrpc
  --revisions-changed   Set the exit code depending on whether upstream
                        floating revisions have changed or not
        </screen>
    </section>

    <section id='ref-bitbake-fetchers'>
        <title>Fetchers</title>

        <para>
            BitBake also contains a set of "fetcher" modules that allow
            retrieval of source code from various types of sources.
            For example, BitBake can get source code from a disk with the metadata, from websites,
            from remote shell accounts, or from Source Code Management (SCM) systems
            like <filename>cvs/subversion/git</filename>.
        </para>

        <para>
            Fetchers are usually triggered by entries in
            <filename><link linkend='var-SRC_URI'>SRC_URI</link></filename>.
            You can find information about the options and formats of entries for specific
            fetchers in the BitBake manual located in the
            <filename>bitbake/doc/manual</filename> directory of the
            <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>.
        </para>

        <para>
            One useful feature for certain Source Code Manager (SCM) fetchers is the ability to
            "auto-update" when the upstream SCM changes version.
            Since this ability requires certain functionality from the SCM, not all
            systems support it.
            Currently Subversion, Bazaar and to a limited extent, Git support the ability to "auto-update".
            This feature works using the <filename><link linkend='var-SRCREV'>SRCREV</link></filename>
            variable.
            See the
            "<ulink url='&YOCTO_DOCS_DEV_URL;#platdev-appdev-srcrev'>Using an External SCM</ulink>" section
            in the Yocto Project Development Manual for more information.
        </para>

    </section>

</chapter>
<!--
vim: expandtab tw=80 ts=4 spell spelllang=en_gb
-->