aboutsummaryrefslogtreecommitdiffstats
path: root/meta/recipes-devtools/python/python3_3.5.6.bb
diff options
context:
space:
mode:
Diffstat (limited to 'meta/recipes-devtools/python/python3_3.5.6.bb')
-rw-r--r--meta/recipes-devtools/python/python3_3.5.6.bb334
1 files changed, 0 insertions, 334 deletions
diff --git a/meta/recipes-devtools/python/python3_3.5.6.bb b/meta/recipes-devtools/python/python3_3.5.6.bb
deleted file mode 100644
index d64cb18c38..0000000000
--- a/meta/recipes-devtools/python/python3_3.5.6.bb
+++ /dev/null
@@ -1,334 +0,0 @@
-require recipes-devtools/python/python3.inc
-
-DEPENDS = "python3-native libffi bzip2 gdbm openssl \
- sqlite3 zlib virtual/libintl xz qemu-native \
- qemu-helper-native virtual/crypt"
-
-DISTRO_SRC_URI ?= "file://sitecustomize.py"
-DISTRO_SRC_URI_linuxstdbase = ""
-SRC_URI = "http://www.python.org/ftp/python/${PV}/Python-${PV}.tar.xz \
-file://python-config.patch \
-file://030-fixup-include-dirs.patch \
-file://130-readline-setup.patch \
-file://150-fix-setupterm.patch \
-file://0001-h2py-Fix-issue-13032-where-it-fails-with-UnicodeDeco.patch \
-file://tweak-MULTIARCH-for-powerpc-linux-gnuspe.patch \
-file://tweak-MULTIARCH-for-powerpc-linux-musl.patch \
-file://support_SOURCE_DATE_EPOCH_in_py_compile.patch \
-${DISTRO_SRC_URI} \
-"
-
-SRC_URI += "\
- file://03-fix-tkinter-detection.patch \
- ${@bb.utils.contains('PACKAGECONFIG', 'tk', '', 'file://avoid_warning_about_tkinter.patch', d)} \
- file://cgi_py.patch \
- file://host_include_contamination.patch \
- file://python-3.3-multilib.patch \
- file://sysroot-include-headers.patch \
- file://unixccompiler.patch \
- file://avoid-ncursesw-include-path.patch \
- file://python3-use-CROSSPYTHONPATH-for-PYTHON_FOR_BUILD.patch \
- file://sysconfig.py-add-_PYTHON_PROJECT_SRC.patch \
- file://setup.py-check-cross_compiling-when-get-FLAGS.patch \
- file://configure.ac-fix-LIBPL.patch \
- file://0001-Issue-21272-Use-_sysconfigdata.py-to-initialize-dist.patch \
- file://pass-missing-libraries-to-Extension-for-mul.patch \
- file://Use-correct-CFLAGS-for-extensions-when-cross-compili.patch \
- file://0002-Makefile-add-target-to-split-profile-generation.patch \
- file://float-endian.patch \
- file://ftplib.patch \
- file://signal.patch \
- file://0001-Issue-28043-SSLContext-has-improved-default-settings.patch \
- file://0002-bpo-29136-Add-TLS-1.3-cipher-suites-and-OP_NO_TLSv1_.patch \
- file://0003-bpo-32947-Fixes-for-TLS-1.3-and-OpenSSL-1.1.1-GH-876.patch \
- file://0004-bpo-33570-TLS-1.3-ciphers-for-OpenSSL-1.1.1-GH-6976.patch \
- file://0005-bpo-30714-ALPN-changes-for-OpenSSL-1.1.0f-2305.patch \
- file://run-ptest \
- file://0001-python3-use-cc_basename-to-replace-CC-for-checking-c.patch \
- "
-
-inherit multilib_header python3native update-alternatives qemu ptest
-
-MULTILIB_SUFFIX = "${@d.getVar('base_libdir',1).split('/')[-1]}"
-
-ALTERNATIVE_${PN}-dev = "python-config"
-ALTERNATIVE_LINK_NAME[python-config] = "${bindir}/python${PYTHON_BINABI}-config"
-ALTERNATIVE_TARGET[python-config] = "${bindir}/python${PYTHON_BINABI}-config-${MULTILIB_SUFFIX}"
-
-CONFIGUREOPTS += " --with-system-ffi "
-
-CACHED_CONFIGUREVARS = "ac_cv_have_chflags=no \
- ac_cv_have_lchflags=no \
- ac_cv_have_long_long_format=yes \
- ac_cv_buggy_getaddrinfo=no \
- ac_cv_file__dev_ptmx=yes \
- ac_cv_file__dev_ptc=no \
-"
-
-TARGET_CC_ARCH += "-DNDEBUG -fno-inline"
-SDK_CC_ARCH += "-DNDEBUG -fno-inline"
-EXTRA_OEMAKE += "CROSS_COMPILE=yes"
-EXTRA_OECONF += "CROSSPYTHONPATH=${STAGING_LIBDIR_NATIVE}/python${PYTHON_MAJMIN}/lib-dynload/ --without-ensurepip"
-
-PYTHON3_PROFILE_TASK ?= "./python -m test.regrtest --pgo test_grammar test_opcodes test_dict test_builtin test_exceptions test_types test_support || true"
-
-export CROSS_COMPILE = "${TARGET_PREFIX}"
-export CCSHARED = "-fPIC"
-
-# Fix cross compilation of different modules
-export CROSSPYTHONPATH = "${STAGING_LIBDIR_NATIVE}/python${PYTHON_MAJMIN}/lib-dynload/:${B}/build/lib.linux-${TARGET_ARCH}-${PYTHON_MAJMIN}:${S}/Lib:${S}/Lib/plat-linux"
-
-PACKAGECONFIG ??= "readline ${@bb.utils.contains('MACHINE_FEATURES', 'qemu-usermode', 'pgo', '', d)}"
-PACKAGECONFIG[readline] = ",,readline"
-# Use profile guided optimisation by running PyBench inside qemu-user
-PACKAGECONFIG[pgo] = "--enable-optimizations"
-PACKAGECONFIG[tk] = ",,tk"
-
-do_configure_append() {
- rm -f ${S}/Makefile.orig
-}
-
-run_make() {
- oe_runmake PGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
- HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
- STAGING_LIBDIR=${STAGING_LIBDIR} \
- STAGING_INCDIR=${STAGING_INCDIR} \
- STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
- LIB=${baselib} \
- ARCH=${TARGET_ARCH} \
- OPT="${CFLAGS}" \
- "$@"
-}
-
-do_compile() {
- # regenerate platform specific files, because they depend on system headers
- cd ${S}/Lib/plat-linux*
- include=${STAGING_INCDIR} ${STAGING_BINDIR_NATIVE}/python3-native/python3 \
- ${S}/Tools/scripts/h2py.py -i '(u_long)' \
- ${STAGING_INCDIR}/dlfcn.h \
- ${STAGING_INCDIR}/linux/cdrom.h \
- ${STAGING_INCDIR}/netinet/in.h \
- ${STAGING_INCDIR}/sys/types.h
- sed -e 's,${STAGING_DIR_HOST},,g' -i *.py
- cd -
-
- # remove any bogus LD_LIBRARY_PATH
- sed -i -e s,RUNSHARED=.*,RUNSHARED=, Makefile
-
- if [ ! -f Makefile.orig ]; then
- install -m 0644 Makefile Makefile.orig
- fi
- sed -i -e 's,^CONFIGURE_LDFLAGS=.*,CONFIGURE_LDFLAGS=-L. -L${STAGING_LIBDIR},g' \
- -e 's,libdir=${libdir},libdir=${STAGING_LIBDIR},g' \
- -e 's,libexecdir=${libexecdir},libexecdir=${STAGING_DIR_HOST}${libexecdir},g' \
- -e 's,^LIBDIR=.*,LIBDIR=${STAGING_LIBDIR},g' \
- -e 's,includedir=${includedir},includedir=${STAGING_INCDIR},g' \
- -e 's,^INCLUDEDIR=.*,INCLUDE=${STAGING_INCDIR},g' \
- -e 's,^CONFINCLUDEDIR=.*,CONFINCLUDE=${STAGING_INCDIR},g' \
- Makefile
- # save copy of it now, because if we do it in do_install and
- # then call do_install twice we get Makefile.orig == Makefile.sysroot
- install -m 0644 Makefile Makefile.sysroot
-
- if ${@bb.utils.contains('PACKAGECONFIG', 'pgo', 'true', 'false', d)}; then
- run_make profile-opt
- qemu_binary="${@qemu_wrapper_cmdline(d, '${STAGING_DIR_TARGET}', ['${B}', '${STAGING_DIR_TARGET}/${base_libdir}'])}"
- cat >pgo-wrapper <<EOF
-#!/bin/sh
-cd ${B}
-$qemu_binary "\$@"
-EOF
- chmod +x pgo-wrapper
- bbnote Gathering profiling data
- ./pgo-wrapper ${PYTHON3_PROFILE_TASK}
- bbnote Profiling data gathered, rebuilding
- run_make clean_and_use_profile
- else
- run_make libpython3.so
- run_make
- fi
-}
-
-do_install() {
- # make install needs the original Makefile, or otherwise the inclues would
- # go to ${D}${STAGING...}/...
- install -m 0644 Makefile.orig Makefile
-
- install -d ${D}${libdir}/pkgconfig
- install -d ${D}${libdir}/python${PYTHON_MAJMIN}/config
-
- # rerun the build once again with original makefile this time
- # run install in a separate step to avoid compile/install race
- if ${@bb.utils.contains('PACKAGECONFIG', 'pgo', 'true', 'false', d)}; then
- run_make DESTDIR=${D} LIBDIR=${libdir} build_all_use_profile
- else
- run_make DESTDIR=${D} LIBDIR=${libdir}
- fi
-
- run_make DESTDIR=${D} LIBDIR=${libdir} install
-
- # avoid conflict with 2to3 from Python 2
- rm -f ${D}/${bindir}/2to3
-
- install -m 0644 Makefile.sysroot ${D}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile
- install -m 0644 Makefile.sysroot ${D}/${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}${PYTHON_ABI}/Makefile
-
- if [ -e ${WORKDIR}/sitecustomize.py ]; then
- install -m 0644 ${WORKDIR}/sitecustomize.py ${D}/${libdir}/python${PYTHON_MAJMIN}
- fi
-
- oe_multilib_header python${PYTHON_BINABI}/pyconfig.h
-}
-
-do_install_append_class-nativesdk () {
- create_wrapper ${D}${bindir}/python${PYTHON_MAJMIN} PYTHONHOME='${prefix}' TERMINFO_DIRS='${sysconfdir}/terminfo:/etc/terminfo:/usr/share/terminfo:/usr/share/misc/terminfo:/lib/terminfo' PYTHONNOUSERSITE='1'
-}
-
-SSTATE_SCAN_FILES += "Makefile"
-PACKAGE_PREPROCESS_FUNCS += "py_package_preprocess"
-
-py_package_preprocess () {
- # copy back the old Makefile to fix target package
- install -m 0644 ${B}/Makefile.orig ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile
- install -m 0644 ${B}/Makefile.orig ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}${PYTHON_ABI}/Makefile
- # Remove references to buildmachine paths in target Makefile and _sysconfigdata
- sed -i -e 's:--sysroot=${STAGING_DIR_TARGET}::g' -e s:'--with-libtool-sysroot=${STAGING_DIR_TARGET}'::g \
- -e 's|${DEBUG_PREFIX_MAP}||g' \
- -e 's:${HOSTTOOLS_DIR}/::g' \
- -e 's:${RECIPE_SYSROOT_NATIVE}::g' \
- -e 's:${RECIPE_SYSROOT}::g' \
- -e 's:${BASE_WORKDIR}/${MULTIMACH_TARGET_SYS}::g' \
- ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile \
- ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}${PYTHON_ABI}/Makefile \
- ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata.py \
- ${PKGD}/${bindir}/python${PYTHON_BINABI}-config
-
- # Recompile _sysconfigdata after modifying it
- cd ${PKGD}
- ${STAGING_BINDIR_NATIVE}/${PYTHON_PN}-native/${PYTHON_PN} \
- -c "from py_compile import compile; compile('./${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata.py')"
- ${STAGING_BINDIR_NATIVE}/${PYTHON_PN}-native/${PYTHON_PN} \
- -c "from py_compile import compile; compile('./${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata.py', optimize=1)"
- ${STAGING_BINDIR_NATIVE}/${PYTHON_PN}-native/${PYTHON_PN} \
- -c "from py_compile import compile; compile('./${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata.py', optimize=2)"
- cd -
-
- mv ${PKGD}/${bindir}/python${PYTHON_BINABI}-config ${PKGD}/${bindir}/python${PYTHON_BINABI}-config-${MULTILIB_SUFFIX}
-}
-
-PACKAGES_remove = "${PN}"
-
-# manual dependency additions
-RPROVIDES_${PN}-modules = "${PN}"
-RRECOMMENDS_${PN}-core_append_class-nativesdk = " nativesdk-python3-modules"
-RRECOMMENDS_${PN}-crypt = "openssl ca-certificates"
-
-FILES_${PN}-2to3 += "${bindir}/2to3-${PYTHON_MAJMIN}"
-FILES_${PN}-pydoc += "${bindir}/pydoc${PYTHON_MAJMIN} ${bindir}/pydoc3"
-FILES_${PN}-idle += "${bindir}/idle3 ${bindir}/idle${PYTHON_MAJMIN}"
-
-# provide python-pyvenv from python3-venv
-RPROVIDES_${PN}-venv += "${PN}-pyvenv"
-
-# package libpython3
-PACKAGES =+ "libpython3 libpython3-staticdev"
-FILES_libpython3 = "${libdir}/libpython*.so.*"
-FILES_libpython3-staticdev += "${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_BINABI}/libpython${PYTHON_BINABI}.a"
-INSANE_SKIP_${PN}-dev += "dev-elf"
-
-# catch all the rest (unsorted)
-PACKAGES += "${PN}-misc"
-RDEPENDS_${PN}-misc += "${PN}-core ${PN}-email ${PN}-codecs"
-RDEPENDS_${PN}-modules += "${PN}-misc"
-FILES_${PN}-misc = "${libdir}/python${PYTHON_MAJMIN}"
-
-# catch manpage
-PACKAGES += "${PN}-man"
-FILES_${PN}-man = "${datadir}/man"
-
-RDEPENDS_${PN}-ptest = "${PN}-modules ${PN}-tests unzip bzip2"
-RDEPENDS_${PN}-tkinter += "${@bb.utils.contains('PACKAGECONFIG', 'tk', 'tk', '', d)}"
-RDEPENDS_${PN}-dev = ""
-
-BBCLASSEXTEND = "nativesdk"
-
-# We want bytecode precompiled .py files (.pyc's) by default
-# but the user may set it on their own conf
-INCLUDE_PYCS ?= "1"
-
-python(){
- import collections, json
-
- filename = os.path.join(d.getVar('THISDIR'), 'python3', 'python3-manifest.json')
- # This python changes the datastore based on the contents of a file, so mark
- # that dependency.
- bb.parse.mark_dependency(d, filename)
-
- with open(filename) as manifest_file:
- manifest_str = manifest_file.read()
- json_start = manifest_str.find('# EOC') + 6
- manifest_file.seek(json_start)
- manifest_str = manifest_file.read()
- python_manifest = json.loads(manifest_str, object_pairs_hook=collections.OrderedDict)
-
- include_pycs = d.getVar('INCLUDE_PYCS')
-
- packages = d.getVar('PACKAGES').split()
- pn = d.getVar('PN')
-
- newpackages=[]
- for key in python_manifest:
- pypackage= pn + '-' + key
-
- if pypackage not in packages:
- # We need to prepend, otherwise python-misc gets everything
- # so we use a new variable
- newpackages.append(pypackage)
-
- # "Build" python's manifest FILES, RDEPENDS and SUMMARY
- d.setVar('FILES_' + pypackage, '')
- for value in python_manifest[key]['files']:
- d.appendVar('FILES_' + pypackage, ' ' + value)
-
- # Add cached files
- if include_pycs == '1':
- for value in python_manifest[key]['cached']:
- d.appendVar('FILES_' + pypackage, ' ' + value)
-
- for value in python_manifest[key]['rdepends']:
- # Make it work with or without $PN
- if '${PN}' in value:
- value=value.split('-')[1]
- d.appendVar('RDEPENDS_' + pypackage, ' ' + pn + '-' + value)
- d.setVar('SUMMARY_' + pypackage, python_manifest[key]['summary'])
-
- # Prepending so to avoid python-misc getting everything
- packages = newpackages + packages
- d.setVar('PACKAGES', ' '.join(packages))
- d.setVar('ALLOW_EMPTY_${PN}-modules', '1')
-}
-
-# Files needed to create a new manifest
-SRC_URI += "file://create_manifest3.py file://get_module_deps3.py file://python3-manifest.json"
-
-do_create_manifest() {
- # This task should be run with every new release of Python.
- # We must ensure that PACKAGECONFIG enables everything when creating
- # a new manifest, this is to base our new manifest on a complete
- # native python build, containing all dependencies, otherwise the task
- # wont be able to find the required files.
- # e.g. BerkeleyDB is an optional build dependency so it may or may not
- # be present, we must ensure it is.
-
- cd ${WORKDIR}
- # This needs to be executed by python-native and NOT by HOST's python
- nativepython3 create_manifest3.py ${PYTHON_MAJMIN}
- cp python3-manifest.json.new ${THISDIR}/python3/python3-manifest.json
-}
-
-# bitbake python -c create_manifest
-addtask do_create_manifest
-
-# Make sure we have native python ready when we create a new manifest
-do_create_manifest[depends] += "python3:do_prepare_recipe_sysroot"
-do_create_manifest[depends] += "python3:do_patch"
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-26 14:34:33 +0000