diff options
Diffstat (limited to 'meta/recipes-core/util-linux/util-linux/MCONFIG')
| -rw-r--r-- | meta/recipes-core/util-linux/util-linux/MCONFIG | 223 |
1 files changed, 0 insertions, 223 deletions
diff --git a/meta/recipes-core/util-linux/util-linux/MCONFIG b/meta/recipes-core/util-linux/util-linux/MCONFIG deleted file mode 100644 index 3fea2c02d7..0000000000 --- a/meta/recipes-core/util-linux/util-linux/MCONFIG +++ /dev/null @@ -1,223 +0,0 @@ -# MCONFIG -- Configuration stuff for util-linux -# Created: Sat Feb 4 15:50:30 1995 -# Copyright 1995 Rickard E. Faith (faith@cs.unc.edu) - -# For a user-mode install, make (at least) three changes: -# - remove the `-o root' part in INSTALLSUID -# - set USE_TTY_GROUP=no -# - define DESTDIR - -# Select for ARCH one of intel, alpha, sparc, arm, m68k, mips -# Select for CPU i386 if the binaries must be able to run on an intel 386 -# (by default i486 code is generated, see below) -CPU=$(shell uname -m) -ARCH=$(shell echo $(CPU) | sed 's/i.86/intel/;s/arm.*/arm/') - -# If HAVE_PAM is set to "yes", then login, chfn, chsh, and newgrp -# will use PAM for authentication. Additionally, passwd will not be -# installed as it is not PAM aware. -HAVE_PAM=no - -# If HAVE_SHADOW is set to "yes", then login, chfn, chsh, newgrp, passwd, -# and vipw will not be built or installed from the login-utils -# subdirectory. -HAVE_SHADOW=yes - -# If HAVE_PASSWD is set to "yes", then passwd will not be built or -# installed from the login-utils subdirectory (but login, chfn, chsh, -# newgrp, and vipw *will* be installed). -HAVE_PASSWD=no - -# If you use chfn and chsh from this package, REQUIRE_PASSWORD will require -# non-root users to enter the account password before updating /etc/passwd. -REQUIRE_PASSWORD=yes -#REQUIRE_PASSWORD=no - -# If you use chsh from this package, ONLY_LISTED_SHELLS will require that -# the selected shell be listed in /etc/shells -- otherwise only a warning is -# printed. This prevents someone from setting their shell to /bin/false. -ONLY_LISTED_SHELLS=yes -#ONLY_LISTED_SHELLS=no - - -# If HAVE_SYSVINIT is set to "yes", then simpleinit and shutdown will not -# be built or installed from the login-utils subdirectory. (The shutdown -# and halt that come with the SysVinit package should be used with the init -# found in that package.) -HAVE_SYSVINIT=no - -# If HAVE_SYSVINIT_UTILS is set to "yes", then last, mesg, and wall will -# not be built or installed from the login-utils subdirectory. (The -# shutdown and init from the SysVinit package do not depend on the last, -# mesg, and wall from that package.) -HAVE_SYSVINIT_UTILS=no - -# If HAVE_WRITE is set to "yes", then write will not be built or -# installed from the misc-utils subdirectory. -# (There is a network aware write in netwrite from NetKit 0.16 or later.) -HAVE_WRITE=no - -# If HAVE_GETTY is set to "yes", then agetty will not be built or -# installed from the login-utils subdirectory. Note that agetty can -# co-exist with other gettys, so this option should never be used. -HAVE_GETTY=no - -# If USE_TTY_GROUP is set to "yes", then wall and write will be installed -# setgid to the "tty" group, and mesg will only set the group write bit. -# Note that this is only useful if login/xterm/etc. change the group of the -# user's tty to "tty" [The login in util-linux does this correctly, and -# xterm will do it correctly if X is compiled with USE_TTY_GROUP set -# properly.] -USE_TTY_GROUP=no - -# If HAVE_KILL is set to "yes", then kill will not be built or -# installed from the misc-utils subdirectory. -# (There is also a kill in the procps package.) -HAVE_KILL=no - -# If ALLOW_VCS_USE is set to "yes", then login will chown /dev/vcsN -# to the current user, allowing her to make a screendump and do other -# nifty things on the console, but also allowing him to keep an open -# file descriptor after logging out to trick the next user. -ALLOW_VCS_USE=yes - -# If HAVE_RESET is set to "yes", then reset won't be installed. The version -# of reset that comes with the ncurses package is less aggressive. -HAVE_RESET=yes - -# If HAVE_SLN is set to "yes", then sln won't be installed -# (but the man page sln.8 will be installed anyway). -# sln also comes with libc and glibc. -HAVE_SLN=no - -# If HAVE_FDUTILS is set to "yes", then setfdprm won't be installed. -HAVE_FDUTILS=no - -# If SILENT_PG is set to "yes", then pg will not ring the bell -# when an invalid key is pressed -SILENT_PG=no - -# If configure decides that Native Language Support (NLS) is available, -# it sets MAY_ENABLE_NLS in defines.h. If you don't want NLS, set -# DISABLE_NLS to "yes". -DISABLE_NLS=no - -# Different optimizations for different cpus. -# gcc 3.0 likes options -mcpu=i486 instead of -m486 -ifeq "$(ARCH)" "intel" - ifeq "$(HAVE_OLD_GCC)" "yes" - CPUHEAD=-m - else - CPUHEAD=-mcpu=i - endif - ifeq "$(CPU)" "i386" - CPUTAIL=386 - else - CPUTAIL=486 - endif - CPUOPT= $(CPUHEAD)$(CPUTAIL) - OPT= -pipe -O2 $(CPUOPT) -fomit-frame-pointer -else - ifeq "$(ARCH)" "arm" - OPT= -pipe -O2 -fsigned-char -fomit-frame-pointer - else - OPT= -O2 -fomit-frame-pointer - endif -endif - -WARNFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes - -LIB=../lib - -ERR_O=$(LIB)/err.o - -# Set HAVE_SLANG to yes if you have slang (and prefer to use that for cfdisk) -# (If neither HAVE_NCURSES nor HAVE_SLANG is defined, cfdisk is not made.) -# HAVE_SLANG=yes -# There is a subdirectory /usr/include/slang containing slcurses.h -# SLANGFLAGS=-I/usr/include/slang -# No such subdirectory - slcurses.h lives in /usr/include -# (no extra definition required). -LIBSLANG=-lslang - -# -# Paths used for compilation (not all are actually used, see CFLAGS below) -# -DEV_DIR= /dev -ETC_DIR= /etc -SBIN_DIR= /sbin -USRSBIN_DIR= /usr/sbin -USRLIB_DIR= /usr/lib -USRBIN_DIR= /usr/bin -USRGAMES_DIR= /usr/games -USRSHAREMISC_DIR=/usr/share/misc -LOCALE_DIR= /usr/share/locale -BIN_DIR= /bin -VAR_PATH= /var -LOG_DIR= /var/log -MAN_DIR= /usr/share/man -INFO_DIR= /usr/share/info - -# -# Paths used for install -# -DEVDIR= $(DESTDIR)$(DEV_DIR) -ETCDIR= $(DESTDIR)$(ETC_DIR) -SBINDIR= $(DESTDIR)$(SBIN_DIR) -USRSBINDIR= $(DESTDIR)$(USRSBIN_DIR) -USRLIBDIR= $(DESTDIR)$(USRLIB_DIR) -USRBINDIR= $(DESTDIR)$(USRBIN_DIR) -USRGAMESDIR= $(DESTDIR)$(USRGAMES_DIR) -USRSHAREMISCDIR=$(DESTDIR)$(USRSHAREMISC_DIR) -LOCALEDIR= $(DESTDIR)$(LOCALE_DIR) -BINDIR= $(DESTDIR)$(BIN_DIR) -VARPATH= $(DESTDIR)$(VAR_PATH) -LOGDIR= $(DESTDIR)$(LOG_DIR) -MANDIR= $(DESTDIR)$(MAN_DIR) -MAN1DIR= $(MANDIR)/man1 -MAN3DIR= $(MANDIR)/man3 -MAN5DIR= $(MANDIR)/man5 -MAN6DIR= $(MANDIR)/man6 -MAN8DIR= $(MANDIR)/man8 -INFODIR= $(DESTDIR)$(INFO_DIR) - -# Directory for shutdown, halt, reboot, etc. -SHUTDOWNDIR= $(SBINDIR) - -# Modes -DIRMODE= 755 -BINMODE= 755 -MANMODE= 644 -DATMODE= 644 -INFOMODE= 644 -SUIDMODE= 4755 - -CHMOD= chmod -INSTALL= install -INSTALLDIR= $(INSTALL) -d -m $(DIRMODE) -INSTALLBIN= $(INSTALL) -m $(BINMODE) -INSTALLMAN= $(INSTALL) -m $(MANMODE) -INSTALLDAT= $(INSTALL) -m $(DATMODE) -INSTALLSUID= $(INSTALL) -m $(SUIDMODE) - -ifeq "$(DISABLE_NLS)" "yes" -NLSFLAGS = -DDISABLE_NLS -endif - -CFLAGS := $(OPT) -I$(LIB) $(WARNFLAGS) \ - $(CURSESFLAGS) $(SLANGFLAGS) $(NLSFLAGS) \ - -D_FILE_OFFSET_BITS=64 \ - -DSBINDIR=\"$(SBIN_DIR)\" \ - -DUSRSBINDIR=\"$(USRSBIN_DIR)\" \ - -DLOGDIR=\"$(LOG_DIR)\" \ - -DVARPATH=\"$(VAR_PATH)\" \ - -DLOCALEDIR=\"$(LOCALE_DIR)\" \ - $(CFLAGS) - - -%.o: %.c - $(CC) -c $(CFLAGS) $< -o $@ - -%: %.cc - $(CXX) $(CFLAGS) $< -o $@ - |