diff options
Diffstat (limited to 'meta/recipes-core/coreutils')
13 files changed, 0 insertions, 5133 deletions
diff --git a/meta/recipes-core/coreutils/coreutils-6.9/coreutils-6.9-cp-i-u.patch b/meta/recipes-core/coreutils/coreutils-6.9/coreutils-6.9-cp-i-u.patch deleted file mode 100644 index 5452b46bbc..0000000000 --- a/meta/recipes-core/coreutils/coreutils-6.9/coreutils-6.9-cp-i-u.patch +++ /dev/null @@ -1,120 +0,0 @@ -Upstream-Status: Inappropriate [legacy version] - -This patch was imported from the Fedora Core 8 coreutils-6.9-9 package. - -The package is stated as being Licensed as GPLv2+. - -Signed-off-by: Mark Hatle <mark.hatle@windriver.com> - ----- - -When "cp -i --update old new" would do nothing because "new" is -newer than "old", cp would nonetheless prompt for whether it is -ok to overwrite "new". Then, regardless of the response (because -of the --update option), cp would do nothing. - -The following patch eliminates the unnecessary prompt in that case. - -diff --git a/src/copy.c b/src/copy.c -index b7bf73b..0e549d2 100644 ---- a/src/copy.c -+++ b/src/copy.c -@@ -1210,6 +1210,30 @@ copy_internal (char const *src_name, char const *dst_name, - return false; - } - -+ if (!S_ISDIR (src_mode) && x->update) -+ { -+ /* When preserving time stamps (but not moving within a file -+ system), don't worry if the destination time stamp is -+ less than the source merely because of time stamp -+ truncation. */ -+ int options = ((x->preserve_timestamps -+ && ! (x->move_mode -+ && dst_sb.st_dev == src_sb.st_dev)) -+ ? UTIMECMP_TRUNCATE_SOURCE -+ : 0); -+ -+ if (0 <= utimecmp (dst_name, &dst_sb, &src_sb, options)) -+ { -+ /* We're using --update and the destination is not older -+ than the source, so do not copy or move. Pretend the -+ rename succeeded, so the caller (if it's mv) doesn't -+ end up removing the source file. */ -+ if (rename_succeeded) -+ *rename_succeeded = true; -+ return true; -+ } -+ } -+ - /* When there is an existing destination file, we may end up - returning early, and hence not copying/moving the file. - This may be due to an interactive `negative' reply to the -@@ -1302,30 +1326,6 @@ copy_internal (char const *src_name, char const *dst_name, - return false; - } - } -- -- if (x->update) -- { -- /* When preserving time stamps (but not moving within a file -- system), don't worry if the destination time stamp is -- less than the source merely because of time stamp -- truncation. */ -- int options = ((x->preserve_timestamps -- && ! (x->move_mode -- && dst_sb.st_dev == src_sb.st_dev)) -- ? UTIMECMP_TRUNCATE_SOURCE -- : 0); -- -- if (0 <= utimecmp (dst_name, &dst_sb, &src_sb, options)) -- { -- /* We're using --update and the destination is not older -- than the source, so do not copy or move. Pretend the -- rename succeeded, so the caller (if it's mv) doesn't -- end up removing the source file. */ -- if (rename_succeeded) -- *rename_succeeded = true; -- return true; -- } -- } - } - - if (x->move_mode) -diff --git a/tests/mv/update b/tests/mv/update -index 0c06024..6c3d149 100755 ---- a/tests/mv/update -+++ b/tests/mv/update -@@ -1,7 +1,7 @@ - #!/bin/sh - # make sure --update works as advertised - --# Copyright (C) 2001, 2004, 2006 Free Software Foundation, Inc. -+# Copyright (C) 2001, 2004, 2006-2007 Free Software Foundation, Inc. - - # This program is free software; you can redistribute it and/or modify - # it under the terms of the GNU General Public License as published by -@@ -46,11 +46,16 @@ fi - - fail=0 - --for cp_or_mv in cp mv; do -- # This is a no-op. -- $cp_or_mv --update old new || fail=1 -- case "`cat new`" in new) ;; *) fail=1 ;; esac -- case "`cat old`" in old) ;; *) fail=1 ;; esac -+for interactive in '' -i; do -+ for cp_or_mv in cp mv; do -+ # This is a no-op, with no prompt. -+ # With coreutils-6.9 and earlier, using --update with -i would -+ # mistakenly elicit a prompt. -+ $cp_or_mv $interactive --update old new < /dev/null > out 2>&1 || fail=1 -+ test -s out && fail=1 -+ case "`cat new`" in new) ;; *) fail=1 ;; esac -+ case "`cat old`" in old) ;; *) fail=1 ;; esac -+ done - done - - # This will actually perform the rename. --- -1.5.3.rc1.16.g9d6f diff --git a/meta/recipes-core/coreutils/coreutils-6.9/coreutils-fix-install.patch b/meta/recipes-core/coreutils/coreutils-6.9/coreutils-fix-install.patch deleted file mode 100644 index 88f61fa108..0000000000 --- a/meta/recipes-core/coreutils/coreutils-6.9/coreutils-fix-install.patch +++ /dev/null @@ -1,101 +0,0 @@ -Upstream-Status: Inappropriate [legacy version] - -The install command doesn't over write the dangling symlink, for -example: - -$ install fileA /tmp/fileA - -If /tmp/fileA is a dangling symlink, there would be an error: - -install: cannot create regular file '/tmp/fileA': File exists - -This is because of the following code in copy.c: - - if (!new_dst) - { - if (XSTAT (x, dst_name, &dst_sb) != 0) - { - if (errno != ENOENT) - { - error (0, errno, _("cannot stat %s"), quote (dst_name)); - return false; - } - else - { - new_dst = true; - } - } - -XSTAT() use stat() for dst_name(the dangling symlink /tmp/fileA) when -install.c invokes it, and stat will set errno to ENOENT, and then -new_dst will be set to true which means that /tmp/fileA doesn't exist, -then we will create /tmp/fileA without remove it first, so the error -comes. - -This is fixed in a way which adds the member cmd_install in -struct cp_options to make sure my change only affected to the install -command and use lstat to fix the problem. - -Signed-off-by: Robert Yang <liezhi.yang@windriver.com> -Signed-off-by: Mark Hatle <mark.hatle@windriver.com> - ---- - src/copy.c | 10 +++++++++- - src/copy.h | 3 +++ - src/install.c | 1 + - 3 files changed, 13 insertions(+), 1 deletions(-) - -diff --git a/src/copy.c b/src/copy.c ---- a/src/copy.c -+++ b/src/copy.c -@@ -1029,6 +1029,7 @@ copy_internal (char const *src_name, char const *dst_name, - bool delayed_ok; - bool copied_as_regular = false; - bool preserve_metadata; -+ int dst_stat_result; - - if (x->move_mode && rename_succeeded) - *rename_succeeded = false; -@@ -1069,7 +1070,14 @@ copy_internal (char const *src_name, char const *dst_name, - - if (!new_dst) - { -- if (XSTAT (x, dst_name, &dst_sb) != 0) -+ if ( x->cmd_install && ( x->backup_type == no_backups)) -+ dst_stat_result = lstat (dst_name, &dst_sb); -+ else -+ { -+ dst_stat_result = XSTAT (x, dst_name, &dst_sb); -+ } -+ -+ if (dst_stat_result != 0) - { - if (errno != ENOENT) - { -diff --git a/src/copy.h b/src/copy.h ---- a/src/copy.h -+++ b/src/copy.h -@@ -114,6 +114,9 @@ struct cp_options - If that fails, then resort to copying. */ - bool move_mode; - -+ /* For the install command */ -+ bool cmd_install; -+ - /* Whether this process has appropriate privileges to chown a file - whose owner is not the effective user ID. */ - bool chown_privileges; -diff --git a/src/install.c b/src/install.c ---- a/src/install.c -+++ b/src/install.c -@@ -149,6 +149,7 @@ cp_option_init (struct cp_options *x) - x->hard_link = false; - x->interactive = I_UNSPECIFIED; - x->move_mode = false; -+ x->cmd_install = true; - x->chown_privileges = chown_privileges (); - x->one_file_system = false; - x->preserve_ownership = false; --- -1.7.0.1 - diff --git a/meta/recipes-core/coreutils/coreutils-6.9/coreutils-fix-texinfo.patch b/meta/recipes-core/coreutils/coreutils-6.9/coreutils-fix-texinfo.patch deleted file mode 100644 index 3ae5a2faeb..0000000000 --- a/meta/recipes-core/coreutils/coreutils-6.9/coreutils-fix-texinfo.patch +++ /dev/null @@ -1,375 +0,0 @@ -From 170be4023bbf9e9698a709e03265945588ac8e01 Mon Sep 17 00:00:00 2001 -From: Robert Yang <liezhi.yang@windriver.com> -Date: Tue, 26 Nov 2013 00:21:50 +0800 -Subject: [PATCH] doc/coreutils.texi: Use '@item' instead of '@itemx' - -Use '@item' instead of '@itemx' in several places, as Texinfo 5 refuses -to process an '@itemx' that is not preceded by an '@item'. Ensure that -node extended names in menus and sectioning are consistent, and that -ordering and presence of nodes in menus and in the actual text are -consistent as well. - -Upstream-Status: Backport [From: coreutils.7620.n7.nabble.com, bug#11828] - -Signed-off-by: Robert Yang <liezhi.yang@windriver.com> ---- - doc/coreutils.texi | 82 +++++++++++++++++++++++++++--------------------------- - 1 file changed, 41 insertions(+), 41 deletions(-) - -diff --git a/doc/coreutils.texi b/doc/coreutils.texi -index 588147f..2dae3fe 100644 ---- a/doc/coreutils.texi -+++ b/doc/coreutils.texi -@@ -555,7 +555,7 @@ symbolic link to a directory. @xref{Target directory}. - @end macro - - @macro optSi --@itemx --si -+@item --si - @opindex --si - @cindex SI output - Append an SI-style abbreviation to each size, such as @samp{M} for -@@ -578,7 +578,7 @@ Use the @option{--si} option if you prefer powers of 1000. - @end macro - - @macro optStripTrailingSlashes --@itemx @w{@kbd{--strip-trailing-slashes}} -+@item @w{@kbd{--strip-trailing-slashes}} - @opindex --strip-trailing-slashes - @cindex stripping trailing slashes - Remove any trailing slashes from each @var{source} argument. -@@ -2496,7 +2496,7 @@ by 1048576. - However, if @var{n} starts with a @samp{-}, - print all but the last @var{n} bytes of each file. - --@itemx -n @var{n} -+@item -n @var{n} - @itemx --lines=@var{n} - @opindex -n - @opindex --lines -@@ -2633,7 +2633,7 @@ This option is the same as @option{--follow=name --retry}. That is, tail - will attempt to reopen a file when it is removed. Should this fail, tail - will keep trying until it becomes accessible again. - --@itemx --retry -+@item --retry - @opindex --retry - This option is useful mainly when following by name (i.e., with - @option{--follow=name}). -@@ -2641,7 +2641,7 @@ Without this option, when tail encounters a file that doesn't - exist or is otherwise inaccessible, it reports that fact and - never checks it again. - --@itemx --sleep-interval=@var{number} -+@item --sleep-interval=@var{number} - @opindex --sleep-interval - Change the number of seconds to wait between iterations (the default is 1.0). - During one iteration, every specified file is checked to see if it has -@@ -2651,7 +2651,7 @@ Historical implementations of @command{tail} have required that - an arbitrary floating point number (using a period before any - fractional digits). - --@itemx --pid=@var{pid} -+@item --pid=@var{pid} - @opindex --pid - When following by name or by descriptor, you may specify the process ID, - @var{pid}, of the sole writer of all @var{file} arguments. Then, shortly -@@ -2674,7 +2674,7 @@ terminate until long after the real writer has terminated. - Note that @option{--pid} cannot be supported on some systems; @command{tail} - will print a warning if this is the case. - --@itemx --max-unchanged-stats=@var{n} -+@item --max-unchanged-stats=@var{n} - @opindex --max-unchanged-stats - When tailing a file by name, if there have been @var{n} (default - n=@value{DEFAULT_MAX_N_UNCHANGED_STATS_BETWEEN_OPENS}) consecutive -@@ -2686,7 +2686,7 @@ number of seconds between when tail prints the last pre-rotation lines - and when it prints the lines that have accumulated in the new log file. - This option is meaningful only when following by name. - --@itemx -n @var{n} -+@item -n @var{n} - @itemx --lines=@var{n} - @opindex -n - @opindex --lines -@@ -2817,7 +2817,7 @@ option. - @opindex --numeric-suffixes - Use digits in suffixes rather than lower-case letters. - --@itemx --verbose -+@item --verbose - @opindex --verbose - Write a diagnostic to standard error just before each output file is opened. - -@@ -3055,7 +3055,7 @@ Print only the newline counts. - @opindex --max-line-length - Print only the maximum line lengths. - --@itemx --files0-from=@var{FILE} -+@item --files0-from=@var{FILE} - @opindex --files0-from=@var{FILE} - @cindex including files from @command{du} - Rather than processing files named on the command line, process those -@@ -3250,7 +3250,7 @@ an MD5 checksum inconsistent with the associated file, or if no valid - line is found, @command{md5sum} exits with nonzero status. Otherwise, - it exits successfully. - --@itemx --status -+@item --status - @opindex --status - @cindex verifying MD5 checksums - This option is useful only when verifying checksums. -@@ -5837,7 +5837,7 @@ command line unless the @option{--dereference-command-line} (@option{-H}), - If a command line argument specifies a symbolic link, show information - for the file the link references rather than for the link itself. - --@itemx --dereference-command-line-symlink-to-dir -+@item --dereference-command-line-symlink-to-dir - @opindex --dereference-command-line-symlink-to-dir - @cindex symbolic links, dereferencing - Do not dereference symbolic links, with one exception: -@@ -7015,15 +7015,15 @@ If specified, the @var{attribute_list} must be a comma-separated list - of one or more of the following strings: - - @table @samp --@itemx mode -+@item mode - Preserve the file mode bits and access control lists. --@itemx ownership -+@item ownership - Preserve the owner and group. On most modern systems, - only users with appropriate privileges may change the owner of a file, - and ordinary users - may preserve the group ownership of a file only if they happen to be - a member of the desired group. --@itemx timestamps -+@item timestamps - Preserve the times of last access and last modification, when possible. - In general, it is not possible to preserve these attributes - when the affected file is a symbolic link. -@@ -7031,12 +7031,12 @@ However, FreeBSD now provides the @code{lutimes} function, which makes - it possibile even for symbolic links. However, this implementation does - not yet take advantage of that. - @c FIXME: once we provide lutimes support, update the above. --@itemx links -+@item links - Preserve in the destination files - any links between corresponding source files. - @c Give examples illustrating how hard links are preserved. - @c Also, show how soft links map to hard links with -L and -H. --@itemx all -+@item all - Preserve all file attributes. - Equivalent to specifying all of the above. - @end table -@@ -7049,12 +7049,12 @@ mode bits of the corresponding source file, minus the bits set in the - umask and minus the set-user-ID and set-group-ID bits. - @xref{File permissions}. - --@itemx @w{@kbd{--no-preserve}=@var{attribute_list}} -+@item @w{@kbd{--no-preserve}=@var{attribute_list}} - @cindex file information, preserving - Do not preserve the specified attributes. The @var{attribute_list} - has the same form as for @option{--preserve}. - --@itemx --parents -+@item --parents - @opindex --parents - @cindex parent directories and @command{cp} - Form the name of each destination file by appending to the target -@@ -7070,7 +7070,7 @@ cp --parents a/b/c existing_dir - copies the file @file{a/b/c} to @file{existing_dir/a/b/c}, creating - any missing intermediate directories. - --@itemx @w{@kbd{--reply}=@var{how}} -+@item @w{@kbd{--reply}=@var{how}} - @opindex --reply - @cindex interactivity - @c FIXME: remove in 2008 -@@ -7742,7 +7742,7 @@ Prompt whether to overwrite each existing destination file, regardless - of its permissions. - If the response is not affirmative, the file is skipped. - --@itemx @w{@kbd{--reply}=@var{how}} -+@item @w{@kbd{--reply}=@var{how}} - @opindex --reply - @cindex interactivity - @c FIXME: remove in 2008 -@@ -7847,7 +7847,7 @@ files are named or if a recursive removal is requested. Ignore any - previous @option{--force} (@option{-f}) option. Equivalent to - @option{--interactive=once}. - --@itemx --interactive [=@var{when}] -+@item --interactive [=@var{when}] - @opindex --interactive - Specify when to issue an interactive prompt. @var{when} may be - omitted, or one of: -@@ -7866,7 +7866,7 @@ removal is requested. Equivalent to @option{-I}. - Specifying @option{--interactive} and no @var{when} is equivalent to - @option{--interactive=always}. - --@itemx --one-file-system -+@item --one-file-system - @opindex --one-file-system - @cindex one file system, restricting @command{rm} to - When removing a hierarchy recursively, skip any directory that is on a -@@ -7884,7 +7884,7 @@ warn about and skip directories on other file systems. - Of course, this will not save your @file{/home} if it and your - chroot happen to be on the same file system. - --@itemx --preserve-root -+@item --preserve-root - @opindex --preserve-root - @cindex root directory, disallow recursive destruction - Fail upon any attempt to remove the root directory, @file{/}, -@@ -7892,7 +7892,7 @@ when used with the @option{--recursive} option. - This is the default behavior. - @xref{Treating / specially}. - --@itemx --no-preserve-root -+@item --no-preserve-root - @opindex --no-preserve-root - @cindex root directory, allow recursive destruction - Do not treat @file{/} specially when removing recursively. -@@ -8874,7 +8874,7 @@ actually changes. - Do not print error messages about files whose ownership cannot be - changed. - --@itemx @w{@kbd{--from}=@var{old-owner}} -+@item @w{@kbd{--from}=@var{old-owner}} - @opindex --from - @cindex symbolic links, changing owner - Change a @var{file}'s ownership only if it has current attributes specified -@@ -8928,14 +8928,14 @@ is a symbolic link. - By default, no diagnostic is issued for symbolic links encountered - during a recursive traversal, but see @option{--verbose}. - --@itemx --preserve-root -+@item --preserve-root - @opindex --preserve-root - @cindex root directory, disallow recursive modification - Fail upon any attempt to recursively change the root directory, @file{/}. - Without @option{--recursive}, this option has no effect. - @xref{Treating / specially}. - --@itemx --no-preserve-root -+@item --no-preserve-root - @opindex --no-preserve-root - @cindex root directory, allow recursive modification - Cancel the effect of any preceding @option{--preserve-root} option. -@@ -9054,14 +9054,14 @@ is a symbolic link. - By default, no diagnostic is issued for symbolic links encountered - during a recursive traversal, but see @option{--verbose}. - --@itemx --preserve-root -+@item --preserve-root - @opindex --preserve-root - @cindex root directory, disallow recursive modification - Fail upon any attempt to recursively change the root directory, @file{/}. - Without @option{--recursive}, this option has no effect. - @xref{Treating / specially}. - --@itemx --no-preserve-root -+@item --no-preserve-root - @opindex --no-preserve-root - @cindex root directory, allow recursive modification - Cancel the effect of any preceding @option{--preserve-root} option. -@@ -9175,14 +9175,14 @@ actually changes. - Do not print error messages about files whose permissions cannot be - changed. - --@itemx --preserve-root -+@item --preserve-root - @opindex --preserve-root - @cindex root directory, disallow recursive modification - Fail upon any attempt to recursively change the root directory, @file{/}. - Without @option{--recursive}, this option has no effect. - @xref{Treating / specially}. - --@itemx --no-preserve-root -+@item --no-preserve-root - @opindex --no-preserve-root - @cindex root directory, allow recursive modification - Cancel the effect of any preceding @option{--preserve-root} option. -@@ -9603,7 +9603,7 @@ The program accepts the following options. Also see @ref{Common options}. - @opindex --all - Show counts for all files, not just directories. - --@itemx --apparent-size -+@item --apparent-size - @opindex --apparent-size - Print apparent sizes, rather than disk usage. The apparent size of a - file is the number of bytes reported by @code{wc -c} on regular files, -@@ -9654,7 +9654,7 @@ Does not affect other symbolic links. This is helpful for finding - out the disk usage of directories, such as @file{/usr/tmp}, which - are often symbolic links. - --@itemx --files0-from=@var{FILE} -+@item --files0-from=@var{FILE} - @opindex --files0-from=@var{FILE} - @cindex including files from @command{du} - Rather than processing files named on the command line, process those -@@ -9733,7 +9733,7 @@ Output a null byte at the end of each line, rather than a newline. - This option enables other programs to parse the output of @command{du} - even when that output would contain file names with embedded newlines. - --@itemx --si -+@item --si - @opindex --si - @cindex SI output - Append an SI-style abbreviation to each size, such as @samp{MB} for -@@ -9754,13 +9754,13 @@ Display only a total for each argument. - Report the size of each directory separately, not including the sizes - of subdirectories. - --@itemx --time -+@item --time - @opindex --time - @cindex last modified dates, displaying in @command{du} - Show time of the most recent modification of any file in the directory, - or any of its subdirectories. - --@itemx --time=ctime -+@item --time=ctime - @itemx --time=status - @itemx --time=use - @opindex --time -@@ -9770,7 +9770,7 @@ or any of its subdirectories. - Show the most recent status change time (the @samp{ctime} in the inode) of - any file in the directory, instead of the modification time. - --@itemx --time=atime -+@item --time=atime - @itemx --time=access - @opindex --time - @opindex atime@r{, show the most recent} -@@ -9911,7 +9911,7 @@ $ stat --format=%d:%i / /usr - 2057:2 - @end example - --@itemx --printf=@var{format} -+@item --printf=@var{format} - @opindex --printf=@var{format} - @cindex output format - Use @var{format} rather than the default format. -@@ -12240,7 +12240,7 @@ Overrides all other options. - @opindex -s - Ignored; for compatibility with other versions of @command{who}. - --@itemx -u -+@item -u - @opindex -u - @cindex idle time - After the login time, print the number of hours and minutes that the -@@ -12254,7 +12254,7 @@ user has been idle. @samp{.} means the user was active in the last minute. - List only the entries that correspond to processes via which the - system is waiting for a user to login. The user name is always @samp{LOGIN}. - --@itemx --lookup -+@item --lookup - @opindex --lookup - Attempt to canonicalize hostnames found in utmp through a DNS lookup. This - is not the default because it can cause significant delays on systems with --- -1.8.3.1 - diff --git a/meta/recipes-core/coreutils/coreutils-6.9/coreutils-i18n.patch b/meta/recipes-core/coreutils/coreutils-6.9/coreutils-i18n.patch deleted file mode 100644 index 653722348a..0000000000 --- a/meta/recipes-core/coreutils/coreutils-6.9/coreutils-i18n.patch +++ /dev/null @@ -1,4051 +0,0 @@ -Upstream-Status: Inappropriate [legacy version] - -This patch was imported from the Fedora Core 8 coreutils-6.9-9 package. - -The package is stated as being Licensed as GPLv2+. - -The comment indicates that the purpose is lin18nux/lsb compliance. - -Signed-off-by: Mark Hatle <mark.hatle@windriver.com> - ---- /dev/null 2007-03-01 09:16:39.219409909 +0000 -+++ coreutils-6.8+/tests/sort/sort-mb-tests 2007-03-01 15:08:24.000000000 +0000 -@@ -0,0 +1,58 @@ -+#! /bin/sh -+case $# in -+ 0) xx='../../src/sort';; -+ *) xx="$1";; -+esac -+test "$VERBOSE" && echo=echo || echo=: -+$echo testing program: $xx -+errors=0 -+test "$srcdir" || srcdir=. -+test "$VERBOSE" && $xx --version 2> /dev/null -+ -+export LC_ALL=en_US.UTF-8 -+locale -k LC_CTYPE 2>&1 | grep -q charmap.*UTF-8 || exit 77 -+errors=0 -+ -+$xx -t ï¼ -k2 -n mb1.I > mb1.O -+code=$? -+if test $code != 0; then -+ $echo "Test mb1 failed: $xx return code $code differs from expected value 0" 1>&2 -+ errors=`expr $errors + 1` -+else -+ cmp mb1.O $srcdir/mb1.X > /dev/null 2>&1 -+ case $? in -+ 0) if test "$VERBOSE"; then $echo "passed mb1"; fi;; -+ 1) $echo "Test mb1 failed: files mb1.O and $srcdir/mb1.X differ" 1>&2 -+ (diff -c mb1.O $srcdir/mb1.X) 2> /dev/null -+ errors=`expr $errors + 1`;; -+ 2) $echo "Test mb1 may have failed." 1>&2 -+ $echo The command "cmp mb1.O $srcdir/mb1.X" failed. 1>&2 -+ errors=`expr $errors + 1`;; -+ esac -+fi -+ -+$xx -t ï¼ -k4 -n mb2.I > mb2.O -+code=$? -+if test $code != 0; then -+ $echo "Test mb2 failed: $xx return code $code differs from expected value 0" 1>&2 -+ errors=`expr $errors + 1` -+else -+ cmp mb2.O $srcdir/mb2.X > /dev/null 2>&1 -+ case $? in -+ 0) if test "$VERBOSE"; then $echo "passed mb2"; fi;; -+ 1) $echo "Test mb2 failed: files mb2.O and $srcdir/mb2.X differ" 1>&2 -+ (diff -c mb2.O $srcdir/mb2.X) 2> /dev/null -+ errors=`expr $errors + 1`;; -+ 2) $echo "Test mb2 may have failed." 1>&2 -+ $echo The command "cmp mb2.O $srcdir/mb2.X" failed. 1>&2 -+ errors=`expr $errors + 1`;; -+ esac -+fi -+ -+if test $errors = 0; then -+ $echo Passed all 113 tests. 1>&2 -+else -+ $echo Failed $errors tests. 1>&2 -+fi -+test $errors = 0 || errors=1 -+exit $errors ---- /dev/null 2007-03-01 09:16:39.219409909 +0000 -+++ coreutils-6.8+/tests/sort/mb2.I 2007-03-01 15:08:24.000000000 +0000 -@@ -0,0 +1,4 @@ -+Appleï¼ ï¼¡ï¼¡10ï¼ ï¼ 20 -+Bananaï¼ ï¼¡ï¼¡5ï¼ ï¼ 30 -+Citrusï¼ ï¼¡ï¼¡20ï¼ ï¼ 5 -+Cherryï¼ ï¼¡ï¼¡30ï¼ ï¼ 10 ---- /dev/null 2007-03-01 09:16:39.219409909 +0000 -+++ coreutils-6.8+/tests/sort/mb2.X 2007-03-01 15:08:24.000000000 +0000 -@@ -0,0 +1,4 @@ -+Citrusï¼ ï¼¡ï¼¡20ï¼ ï¼ 5 -+Cherryï¼ ï¼¡ï¼¡30ï¼ ï¼ 10 -+Appleï¼ ï¼¡ï¼¡10ï¼ ï¼ 20 -+Bananaï¼ ï¼¡ï¼¡5ï¼ ï¼ 30 ---- /dev/null 2007-03-01 09:16:39.219409909 +0000 -+++ coreutils-6.8+/tests/sort/mb1.I 2007-03-01 15:08:24.000000000 +0000 -@@ -0,0 +1,4 @@ -+Appleï¼ 10 -+Bananaï¼ 5 -+Citrusï¼ 20 -+Cherryï¼ 30 ---- /dev/null 2007-03-01 09:16:39.219409909 +0000 -+++ coreutils-6.8+/tests/sort/mb1.X 2007-03-01 15:08:24.000000000 +0000 -@@ -0,0 +1,4 @@ -+Bananaï¼ 5 -+Appleï¼ 10 -+Citrusï¼ 20 -+Cherryï¼ 30 ---- coreutils-6.8+/tests/sort/Makefile.am.i18n 2007-01-24 07:47:37.000000000 +0000 -+++ coreutils-6.8+/tests/sort/Makefile.am 2007-03-01 15:09:59.000000000 +0000 -@@ -66,15 +66,17 @@ - bigfield.O bigfield.E - ##test-files-end - --EXTRA_DIST = Test.pm $x-tests $(explicit) $(maint_gen) --noinst_SCRIPTS = $x-tests -+run_gen += mb1.0 mb2.0 -+ -+EXTRA_DIST = Test.pm $x-tests $(explicit) $(maint_gen) mb1.I mb1.X mb2.I mb2.X -+noinst_SCRIPTS = $x-tests # $x-mb-tests - TESTS_ENVIRONMENT = \ - CU_TEST_NAME=`basename $(abs_srcdir)`,$$tst \ - PATH="$(VG_PATH_PREFIX)`pwd`/../../src$(PATH_SEPARATOR)$$PATH" - - editpl = sed -e 's,@''PERL''@,$(PERL),g' -e 's,@''srcdir''@,$(srcdir),g' - --TESTS = $x-tests -+TESTS = $x-tests $x-mb-tests - - mk_script = $(srcdir)/../mk-script - $(srcdir)/$x-tests: $(mk_script) Test.pm Makefile.am ---- coreutils-6.8+/lib/linebuffer.h.i18n 2005-05-14 07:44:24.000000000 +0100 -+++ coreutils-6.8+/lib/linebuffer.h 2007-03-01 15:08:24.000000000 +0000 -@@ -22,6 +22,11 @@ - - # include <stdio.h> - -+/* Get mbstate_t. */ -+# if HAVE_WCHAR_H -+# include <wchar.h> -+# endif -+ - /* A `struct linebuffer' holds a line of text. */ - - struct linebuffer -@@ -29,6 +34,9 @@ - size_t size; /* Allocated. */ - size_t length; /* Used. */ - char *buffer; -+# if HAVE_WCHAR_H -+ mbstate_t state; -+# endif - }; - - /* Initialize linebuffer LINEBUFFER for use. */ ---- coreutils-6.8+/src/expand.c.i18n 2007-01-14 15:41:28.000000000 +0000 -+++ coreutils-6.8+/src/expand.c 2007-03-01 15:08:24.000000000 +0000 -@@ -38,11 +38,28 @@ - #include <stdio.h> - #include <getopt.h> - #include <sys/types.h> -+ -+/* Get mbstate_t, mbrtowc(), wcwidth(). */ -+#if HAVE_WCHAR_H -+# include <wchar.h> -+#endif -+ - #include "system.h" - #include "error.h" - #include "quote.h" - #include "xstrndup.h" - -+/* MB_LEN_MAX is incorrectly defined to be 1 in at least one GCC -+ installation; work around this configuration error. */ -+#if !defined MB_LEN_MAX || MB_LEN_MAX < 2 -+# define MB_LEN_MAX 16 -+#endif -+ -+/* Some systems, like BeOS, have multibyte encodings but lack mbstate_t. */ -+#if HAVE_MBRTOWC && defined mbstate_t -+# define mbrtowc(pwc, s, n, ps) (mbrtowc) (pwc, s, n, 0) -+#endif -+ - /* The official name of this program (e.g., no `g' prefix). */ - #define PROGRAM_NAME "expand" - -@@ -183,6 +200,7 @@ - stops = num_start + len - 1; - } - } -+ - else - { - error (0, 0, _("tab size contains invalid character(s): %s"), -@@ -365,6 +383,142 @@ - } - } - -+#if HAVE_MBRTOWC -+static void -+expand_multibyte (void) -+{ -+ FILE *fp; /* Input strem. */ -+ mbstate_t i_state; /* Current shift state of the input stream. */ -+ mbstate_t i_state_bak; /* Back up the I_STATE. */ -+ mbstate_t o_state; /* Current shift state of the output stream. */ -+ char buf[MB_LEN_MAX + BUFSIZ]; /* For spooling a read byte sequence. */ -+ char *bufpos; /* Next read position of BUF. */ -+ size_t buflen = 0; /* The length of the byte sequence in buf. */ -+ wchar_t wc; /* A gotten wide character. */ -+ size_t mblength; /* The byte size of a multibyte character -+ which shows as same character as WC. */ -+ int tab_index = 0; /* Index in `tab_list' of next tabstop. */ -+ int column = 0; /* Column on screen of the next char. */ -+ int next_tab_column; /* Column the next tab stop is on. */ -+ int convert = 1; /* If nonzero, perform translations. */ -+ -+ fp = next_file ((FILE *) NULL); -+ if (fp == NULL) -+ return; -+ -+ memset (&o_state, '\0', sizeof(mbstate_t)); -+ memset (&i_state, '\0', sizeof(mbstate_t)); -+ -+ for (;;) -+ { -+ /* Refill the buffer BUF. */ -+ if (buflen < MB_LEN_MAX && !feof(fp) && !ferror(fp)) -+ { -+ memmove (buf, bufpos, buflen); -+ buflen += fread (buf + buflen, sizeof(char), BUFSIZ, fp); -+ bufpos = buf; -+ } -+ -+ /* No character is left in BUF. */ -+ if (buflen < 1) -+ { -+ fp = next_file (fp); -+ -+ if (fp == NULL) -+ break; /* No more files. */ -+ else -+ { -+ memset (&i_state, '\0', sizeof(mbstate_t)); -+ continue; -+ } -+ } -+ -+ /* Get a wide character. */ -+ i_state_bak = i_state; -+ mblength = mbrtowc (&wc, bufpos, buflen, &i_state); -+ -+ switch (mblength) -+ { -+ case (size_t)-1: /* illegal byte sequence. */ -+ case (size_t)-2: -+ mblength = 1; -+ i_state = i_state_bak; -+ if (convert) -+ { -+ ++column; -+ if (convert_entire_line == 0) -+ convert = 0; -+ } -+ putchar (*bufpos); -+ break; -+ -+ case 0: /* null. */ -+ mblength = 1; -+ if (convert && convert_entire_line == 0) -+ convert = 0; -+ putchar ('\0'); -+ break; -+ -+ default: -+ if (wc == L'\n') /* LF. */ -+ { -+ tab_index = 0; -+ column = 0; -+ convert = 1; -+ putchar ('\n'); -+ } -+ else if (wc == L'\t' && convert) /* Tab. */ -+ { -+ if (tab_size == 0) -+ { -+ /* Do not let tab_index == first_free_tab; -+ stop when it is 1 less. */ -+ while (tab_index < first_free_tab - 1 -+ && column >= tab_list[tab_index]) -+ tab_index++; -+ next_tab_column = tab_list[tab_index]; -+ if (tab_index < first_free_tab - 1) -+ tab_index++; -+ if (column >= next_tab_column) -+ next_tab_column = column + 1; -+ } -+ else -+ next_tab_column = column + tab_size - column % tab_size; -+ -+ while (column < next_tab_column) -+ { -+ putchar (' '); -+ ++column; -+ } -+ } -+ else /* Others. */ -+ { -+ if (convert) -+ { -+ if (wc == L'\b') -+ { -+ if (column > 0) -+ --column; -+ } -+ else -+ { -+ int width; /* The width of WC. */ -+ -+ width = wcwidth (wc); -+ column += (width > 0) ? width : 0; -+ if (convert_entire_line == 0) -+ convert = 0; -+ } -+ } -+ fwrite (bufpos, sizeof(char), mblength, stdout); -+ } -+ } -+ buflen -= mblength; -+ bufpos += mblength; -+ } -+} -+#endif -+ - int - main (int argc, char **argv) - { -@@ -429,7 +583,12 @@ - - file_list = (optind < argc ? &argv[optind] : stdin_argv); - -- expand (); -+#if HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1) -+ expand_multibyte (); -+ else -+#endif -+ expand (); - - if (have_read_stdin && fclose (stdin) != 0) - error (EXIT_FAILURE, errno, "-"); ---- coreutils-6.8+/src/join.c.i18n 2007-01-14 15:41:28.000000000 +0000 -+++ coreutils-6.8+/src/join.c 2007-03-01 15:08:24.000000000 +0000 -@@ -23,16 +23,30 @@ - #include <sys/types.h> - #include <getopt.h> - -+/* Get mbstate_t, mbrtowc(), mbrtowc(), wcwidth(). */ -+#if HAVE_WCHAR_H -+# include <wchar.h> -+#endif -+ -+/* Get iswblank(), towupper. */ -+#if HAVE_WCTYPE_H -+# include <wctype.h> -+#endif -+ - #include "system.h" - #include "error.h" - #include "hard-locale.h" - #include "linebuffer.h" --#include "memcasecmp.h" - #include "quote.h" - #include "stdio--.h" - #include "xmemcoll.h" - #include "xstrtol.h" - -+/* Some systems, like BeOS, have multibyte encodings but lack mbstate_t. */ -+#if HAVE_MBRTOWC && defined mbstate_t -+# define mbrtowc(pwc, s, n, ps) (mbrtowc) (pwc, s, n, 0) -+#endif -+ - /* The official name of this program (e.g., no `g' prefix). */ - #define PROGRAM_NAME "join" - -@@ -104,10 +118,12 @@ - /* Last element in `outlist', where a new element can be added. */ - static struct outlist *outlist_end = &outlist_head; - --/* Tab character separating fields. If negative, fields are separated -- by any nonempty string of blanks, otherwise by exactly one -- tab character whose value (when cast to unsigned char) equals TAB. */ --static int tab = -1; -+/* Tab character separating fields. If NULL, fields are separated -+ by any nonempty string of blanks. */ -+static char *tab = NULL; -+ -+/* The number of bytes used for tab. */ -+static size_t tablen = 0; - - static struct option const longopts[] = - { -@@ -190,6 +206,8 @@ - - /* Fill in the `fields' structure in LINE. */ - -+/* Fill in the `fields' structure in LINE. */ -+ - static void - xfields (struct line *line) - { -@@ -199,10 +217,11 @@ - if (ptr == lim) - return; - -- if (0 <= tab) -+ if (tab != NULL) - { -+ unsigned char t = tab[0]; - char *sep; -- for (; (sep = memchr (ptr, tab, lim - ptr)) != NULL; ptr = sep + 1) -+ for (; (sep = memchr (ptr, t, lim - ptr)) != NULL; ptr = sep + 1) - extract_field (line, ptr, sep - ptr); - } - else -@@ -229,6 +248,148 @@ - extract_field (line, ptr, lim - ptr); - } - -+#if HAVE_MBRTOWC -+static void -+xfields_multibyte (struct line *line) -+{ -+ char *ptr = line->buf.buffer; -+ char const *lim = ptr + line->buf.length - 1; -+ wchar_t wc = 0; -+ size_t mblength = 1; -+ mbstate_t state, state_bak; -+ -+ memset (&state, 0, sizeof (mbstate_t)); -+ -+ if (ptr == lim) -+ return; -+ -+ if (tab != NULL) -+ { -+ unsigned char t = tab[0]; -+ char *sep = ptr; -+ for (; ptr < lim; ptr = sep + mblength) -+ { -+ sep = ptr; -+ while (sep < lim) -+ { -+ state_bak = state; -+ mblength = mbrtowc (&wc, sep, lim - sep + 1, &state); -+ -+ if (mblength == (size_t)-1 || mblength == (size_t)-2) -+ { -+ mblength = 1; -+ state = state_bak; -+ } -+ mblength = (mblength < 1) ? 1 : mblength; -+ -+ if (mblength == tablen && !memcmp (sep, tab, mblength)) -+ break; -+ else -+ { -+ sep += mblength; -+ continue; -+ } -+ } -+ -+ if (sep == lim) -+ break; -+ -+ extract_field (line, ptr, sep - ptr); -+ } -+ } -+ else -+ { -+ /* Skip leading blanks before the first field. */ -+ while(ptr < lim) -+ { -+ state_bak = state; -+ mblength = mbrtowc (&wc, ptr, lim - ptr + 1, &state); -+ -+ if (mblength == (size_t)-1 || mblength == (size_t)-2) -+ { -+ mblength = 1; -+ state = state_bak; -+ break; -+ } -+ mblength = (mblength < 1) ? 1 : mblength; -+ -+ if (!iswblank(wc)) -+ break; -+ ptr += mblength; -+ } -+ -+ do -+ { -+ char *sep; -+ state_bak = state; -+ mblength = mbrtowc (&wc, ptr, lim - ptr + 1, &state); -+ if (mblength == (size_t)-1 || mblength == (size_t)-2) -+ { -+ mblength = 1; -+ state = state_bak; -+ break; -+ } -+ mblength = (mblength < 1) ? 1 : mblength; -+ -+ sep = ptr + mblength; -+ while (sep != lim) -+ { -+ state_bak = state; -+ mblength = mbrtowc (&wc, sep, lim - sep + 1, &state); -+ if (mblength == (size_t)-1 || mblength == (size_t)-2) -+ { -+ mblength = 1; -+ state = state_bak; -+ break; -+ } -+ mblength = (mblength < 1) ? 1 : mblength; -+ -+ if (iswblank (wc)) -+ break; -+ -+ sep += mblength; -+ } -+ -+ extract_field (line, ptr, sep - ptr); -+ if (sep == lim) -+ return; -+ -+ state_bak = state; -+ mblength = mbrtowc (&wc, sep, lim - sep + 1, &state); -+ if (mblength == (size_t)-1 || mblength == (size_t)-2) -+ { -+ mblength = 1; -+ state = state_bak; -+ break; -+ } -+ mblength = (mblength < 1) ? 1 : mblength; -+ -+ ptr = sep + mblength; -+ while (ptr != lim) -+ { -+ state_bak = state; -+ mblength = mbrtowc (&wc, ptr, lim - ptr + 1, &state); -+ if (mblength == (size_t)-1 || mblength == (size_t)-2) -+ { -+ mblength = 1; -+ state = state_bak; -+ break; -+ } -+ mblength = (mblength < 1) ? 1 : mblength; -+ -+ if (!iswblank (wc)) -+ break; -+ -+ ptr += mblength; -+ } -+ } -+ while (ptr != lim); -+ } -+ -+ extract_field (line, ptr, lim - ptr); -+} -+#endif -+ - /* Read a line from FP into LINE and split it into fields. - Return true if successful. */ - -@@ -249,6 +410,11 @@ - line->nfields_allocated = 0; - line->nfields = 0; - line->fields = NULL; -+#if HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1) -+ xfields_multibyte (line); -+ else -+#endif - xfields (line); - return true; - } -@@ -303,56 +469,114 @@ - keycmp (struct line const *line1, struct line const *line2) - { - /* Start of field to compare in each file. */ -- char *beg1; -- char *beg2; -- -- size_t len1; -- size_t len2; /* Length of fields to compare. */ -+ char *beg[2]; -+ char *copy[2]; -+ size_t len[2]; /* Length of fields to compare. */ - int diff; -+ int i, j; - - if (join_field_1 < line1->nfields) - { -- beg1 = line1->fields[join_field_1].beg; -- len1 = line1->fields[join_field_1].len; -+ beg[0] = line1->fields[join_field_1].beg; -+ len[0] = line1->fields[join_field_1].len; - } - else - { -- beg1 = NULL; -- len1 = 0; -+ beg[0] = NULL; -+ len[0] = 0; - } - - if (join_field_2 < line2->nfields) - { -- beg2 = line2->fields[join_field_2].beg; -- len2 = line2->fields[join_field_2].len; -+ beg[1] = line2->fields[join_field_2].beg; -+ len[1] = line2->fields[join_field_2].len; - } - else - { -- beg2 = NULL; -- len2 = 0; -+ beg[1] = NULL; -+ len[1] = 0; - } - -- if (len1 == 0) -- return len2 == 0 ? 0 : -1; -- if (len2 == 0) -+ if (len[0] == 0) -+ return len[1] == 0 ? 0 : -1; -+ if (len[1] == 0) - return 1; - - if (ignore_case) - { -- /* FIXME: ignore_case does not work with NLS (in particular, -- with multibyte chars). */ -- diff = memcasecmp (beg1, beg2, MIN (len1, len2)); -+#ifdef HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1) -+ { -+ size_t mblength; -+ wchar_t wc, uwc; -+ mbstate_t state, state_bak; -+ -+ memset (&state, '\0', sizeof (mbstate_t)); -+ -+ for (i = 0; i < 2; i++) -+ { -+ copy[i] = alloca (len[i] + 1); -+ -+ for (j = 0; j < MIN (len[0], len[1]);) -+ { -+ state_bak = state; -+ mblength = mbrtowc (&wc, beg[i] + j, len[i] - j, &state); -+ -+ switch (mblength) -+ { -+ case (size_t) -1: -+ case (size_t) -2: -+ state = state_bak; -+ /* Fall through */ -+ case 0: -+ mblength = 1; -+ break; -+ -+ default: -+ uwc = towupper (wc); -+ -+ if (uwc != wc) -+ { -+ mbstate_t state_wc; -+ -+ memset (&state_wc, '\0', sizeof (mbstate_t)); -+ wcrtomb (copy[i] + j, uwc, &state_wc); -+ } -+ else -+ memcpy (copy[i] + j, beg[i] + j, mblength); -+ } -+ j += mblength; -+ } -+ copy[i][j] = '\0'; -+ } -+ } -+ else -+#endif -+ { -+ for (i = 0; i < 2; i++) -+ { -+ copy[i] = alloca (len[i] + 1); -+ -+ for (j = 0; j < MIN (len[0], len[1]); j++) -+ copy[i][j] = toupper (beg[i][j]); -+ -+ copy[i][j] = '\0'; -+ } -+ } - } - else - { -- if (hard_LC_COLLATE) -- return xmemcoll (beg1, len1, beg2, len2); -- diff = memcmp (beg1, beg2, MIN (len1, len2)); -+ copy[0] = (unsigned char *) beg[0]; -+ copy[1] = (unsigned char *) beg[1]; - } - -+ if (hard_LC_COLLATE) -+ return xmemcoll ((char *) copy[0], len[0], (char *) copy[1], len[1]); -+ diff = memcmp (copy[0], copy[1], MIN (len[0], len[1])); -+ - if (diff) - return diff; -- return len1 < len2 ? -1 : len1 != len2; -+ return len[0] - len[1]; - } - - /* Print field N of LINE if it exists and is nonempty, otherwise -@@ -377,11 +601,18 @@ - - /* Print the join of LINE1 and LINE2. */ - -+#define PUT_TAB_CHAR \ -+ do \ -+ { \ -+ (tab != NULL) ? \ -+ fwrite(tab, sizeof(char), tablen, stdout) : putchar (' '); \ -+ } \ -+ while (0) -+ - static void - prjoin (struct line const *line1, struct line const *line2) - { - const struct outlist *outlist; -- char output_separator = tab < 0 ? ' ' : tab; - - outlist = outlist_head.next; - if (outlist) -@@ -397,12 +628,12 @@ - if (o->file == 0) - { - if (line1 == &uni_blank) -- { -+ { - line = line2; - field = join_field_2; - } - else -- { -+ { - line = line1; - field = join_field_1; - } -@@ -416,7 +647,7 @@ - o = o->next; - if (o == NULL) - break; -- putchar (output_separator); -+ PUT_TAB_CHAR; - } - putchar ('\n'); - } -@@ -434,23 +665,23 @@ - prfield (join_field_1, line1); - for (i = 0; i < join_field_1 && i < line1->nfields; ++i) - { -- putchar (output_separator); -+ PUT_TAB_CHAR; - prfield (i, line1); - } - for (i = join_field_1 + 1; i < line1->nfields; ++i) - { -- putchar (output_separator); -+ PUT_TAB_CHAR; - prfield (i, line1); - } - - for (i = 0; i < join_field_2 && i < line2->nfields; ++i) - { -- putchar (output_separator); -+ PUT_TAB_CHAR; - prfield (i, line2); - } - for (i = join_field_2 + 1; i < line2->nfields; ++i) - { -- putchar (output_separator); -+ PUT_TAB_CHAR; - prfield (i, line2); - } - putchar ('\n'); -@@ -859,20 +1090,41 @@ - - case 't': - { -- unsigned char newtab = optarg[0]; -- if (! newtab) -+ char *newtab; -+ size_t newtablen; -+ if (! optarg[0]) - error (EXIT_FAILURE, 0, _("empty tab")); -- if (optarg[1]) -+ newtab = xstrdup (optarg); -+#if HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1) -+ { -+ mbstate_t state; -+ -+ memset (&state, 0, sizeof (mbstate_t)); -+ newtablen = mbrtowc (NULL, newtab, -+ strnlen (newtab, MB_LEN_MAX), -+ &state); -+ if (newtablen == (size_t) 0 -+ || newtablen == (size_t) -1 -+ || newtablen == (size_t) -2) -+ newtablen = 1; -+ } -+ else -+#endif -+ newtablen = 1; -+ -+ if (newtablen == 1 && newtab[1]) -+ { -+ if (STREQ (newtab, "\\0")) -+ newtab[0] = '\0'; -+ } -+ if (tab != NULL && strcmp (tab, newtab)) - { -- if (STREQ (optarg, "\\0")) -- newtab = '\0'; -- else -- error (EXIT_FAILURE, 0, _("multi-character tab %s"), -- quote (optarg)); -+ free (newtab); -+ error (EXIT_FAILURE, 0, _("incompatible tabs")); - } -- if (0 <= tab && tab != newtab) -- error (EXIT_FAILURE, 0, _("incompatible tabs")); - tab = newtab; -+ tablen = newtablen; - } - break; - ---- coreutils-6.8+/src/uniq.c.i18n 2007-01-14 15:41:28.000000000 +0000 -+++ coreutils-6.8+/src/uniq.c 2007-03-01 15:08:24.000000000 +0000 -@@ -23,6 +23,16 @@ - #include <getopt.h> - #include <sys/types.h> - -+/* Get mbstate_t, mbrtowc(). */ -+#if HAVE_WCHAR_H -+# include <wchar.h> -+#endif -+ -+/* Get isw* functions. */ -+#if HAVE_WCTYPE_H -+# include <wctype.h> -+#endif -+ - #include "system.h" - #include "argmatch.h" - #include "linebuffer.h" -@@ -32,7 +42,19 @@ - #include "quote.h" - #include "xmemcoll.h" - #include "xstrtol.h" --#include "memcasecmp.h" -+#include "xmemcoll.h" -+ -+/* MB_LEN_MAX is incorrectly defined to be 1 in at least one GCC -+ installation; work around this configuration error. */ -+#if !defined MB_LEN_MAX || MB_LEN_MAX < 2 -+# define MB_LEN_MAX 16 -+#endif -+ -+/* Some systems, like BeOS, have multibyte encodings but lack mbstate_t. */ -+#if HAVE_MBRTOWC && defined mbstate_t -+# define mbrtowc(pwc, s, n, ps) (mbrtowc) (pwc, s, n, 0) -+#endif -+ - - /* The official name of this program (e.g., no `g' prefix). */ - #define PROGRAM_NAME "uniq" -@@ -109,6 +131,10 @@ - /* Select whether/how to delimit groups of duplicate lines. */ - static enum delimit_method delimit_groups; - -+/* Function pointers. */ -+static char * -+(*find_field) (struct linebuffer *line); -+ - static struct option const longopts[] = - { - {"count", no_argument, NULL, 'c'}, -@@ -198,7 +224,7 @@ - return a pointer to the beginning of the line's field to be compared. */ - - static char * --find_field (const struct linebuffer *line) -+find_field_uni (struct linebuffer *line) - { - size_t count; - char *lp = line->buffer; -@@ -219,6 +245,83 @@ - return lp + i; - } - -+#if HAVE_MBRTOWC -+ -+# define MBCHAR_TO_WCHAR(WC, MBLENGTH, LP, POS, SIZE, STATEP, CONVFAIL) \ -+ do \ -+ { \ -+ mbstate_t state_bak; \ -+ \ -+ CONVFAIL = 0; \ -+ state_bak = *STATEP; \ -+ \ -+ MBLENGTH = mbrtowc (&WC, LP + POS, SIZE - POS, STATEP); \ -+ \ -+ switch (MBLENGTH) \ -+ { \ -+ case (size_t)-2: \ -+ case (size_t)-1: \ -+ *STATEP = state_bak; \ -+ CONVFAIL++; \ -+ /* Fall through */ \ -+ case 0: \ -+ MBLENGTH = 1; \ -+ } \ -+ } \ -+ while (0) -+ -+static char * -+find_field_multi (struct linebuffer *line) -+{ -+ size_t count; -+ char *lp = line->buffer; -+ size_t size = line->length - 1; -+ size_t pos; -+ size_t mblength; -+ wchar_t wc; -+ mbstate_t *statep; -+ int convfail; -+ -+ pos = 0; -+ statep = &(line->state); -+ -+ /* skip fields. */ -+ for (count = 0; count < skip_fields && pos < size; count++) -+ { -+ while (pos < size) -+ { -+ MBCHAR_TO_WCHAR (wc, mblength, lp, pos, size, statep, convfail); -+ -+ if (convfail || !iswblank (wc)) -+ { -+ pos += mblength; -+ break; -+ } -+ pos += mblength; -+ } -+ -+ while (pos < size) -+ { -+ MBCHAR_TO_WCHAR (wc, mblength, lp, pos, size, statep, convfail); -+ -+ if (!convfail && iswblank (wc)) -+ break; -+ -+ pos += mblength; -+ } -+ } -+ -+ /* skip fields. */ -+ for (count = 0; count < skip_chars && pos < size; count++) -+ { -+ MBCHAR_TO_WCHAR (wc, mblength, lp, pos, size, statep, convfail); -+ pos += mblength; -+ } -+ -+ return lp + pos; -+} -+#endif -+ - /* Return false if two strings OLD and NEW match, true if not. - OLD and NEW point not to the beginnings of the lines - but rather to the beginnings of the fields to compare. -@@ -227,6 +330,8 @@ - static bool - different (char *old, char *new, size_t oldlen, size_t newlen) - { -+ char *copy_old, *copy_new; -+ - if (check_chars < oldlen) - oldlen = check_chars; - if (check_chars < newlen) -@@ -234,14 +339,92 @@ - - if (ignore_case) - { -- /* FIXME: This should invoke strcoll somehow. */ -- return oldlen != newlen || memcasecmp (old, new, oldlen); -+ size_t i; -+ -+ copy_old = alloca (oldlen + 1); -+ copy_new = alloca (oldlen + 1); -+ -+ for (i = 0; i < oldlen; i++) -+ { -+ copy_old[i] = toupper (old[i]); -+ copy_new[i] = toupper (new[i]); -+ } - } -- else if (hard_LC_COLLATE) -- return xmemcoll (old, oldlen, new, newlen) != 0; - else -- return oldlen != newlen || memcmp (old, new, oldlen); -+ { -+ copy_old = (char *)old; -+ copy_new = (char *)new; -+ } -+ -+ return xmemcoll (copy_old, oldlen, copy_new, newlen); -+} -+ -+#if HAVE_MBRTOWC -+static int -+different_multi (const char *old, const char *new, size_t oldlen, size_t newlen, mbstate_t oldstate, mbstate_t newstate) -+{ -+ size_t i, j, chars; -+ const char *str[2]; -+ char *copy[2]; -+ size_t len[2]; -+ mbstate_t state[2]; -+ size_t mblength; -+ wchar_t wc, uwc; -+ mbstate_t state_bak; -+ -+ str[0] = old; -+ str[1] = new; -+ len[0] = oldlen; -+ len[1] = newlen; -+ state[0] = oldstate; -+ state[1] = newstate; -+ -+ for (i = 0; i < 2; i++) -+ { -+ copy[i] = alloca (len[i] + 1); -+ -+ for (j = 0, chars = 0; j < len[i] && chars < check_chars; chars++) -+ { -+ state_bak = state[i]; -+ mblength = mbrtowc (&wc, str[i] + j, len[i] - j, &(state[i])); -+ -+ switch (mblength) -+ { -+ case (size_t)-1: -+ case (size_t)-2: -+ state[i] = state_bak; -+ /* Fall through */ -+ case 0: -+ mblength = 1; -+ break; -+ -+ default: -+ if (ignore_case) -+ { -+ uwc = towupper (wc); -+ -+ if (uwc != wc) -+ { -+ mbstate_t state_wc; -+ -+ memset (&state_wc, '\0', sizeof(mbstate_t)); -+ wcrtomb (copy[i] + j, uwc, &state_wc); -+ } -+ else -+ memcpy (copy[i] + j, str[i] + j, mblength); -+ } -+ else -+ memcpy (copy[i] + j, str[i] + j, mblength); -+ } -+ j += mblength; -+ } -+ copy[i][j] = '\0'; -+ len[i] = j; -+ } -+ -+ return xmemcoll (copy[0], len[0], copy[1], len[1]); - } -+#endif - - /* Output the line in linebuffer LINE to standard output - provided that the switches say it should be output. -@@ -295,15 +478,43 @@ - { - char *prevfield IF_LINT (= NULL); - size_t prevlen IF_LINT (= 0); -+#if HAVE_MBRTOWC -+ mbstate_t prevstate; -+ -+ memset (&prevstate, '\0', sizeof (mbstate_t)); -+#endif - - while (!feof (stdin)) - { - char *thisfield; - size_t thislen; -+#if HAVE_MBRTOWC -+ mbstate_t thisstate; -+#endif -+ - if (readlinebuffer (thisline, stdin) == 0) - break; - thisfield = find_field (thisline); - thislen = thisline->length - 1 - (thisfield - thisline->buffer); -+#if HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1) -+ { -+ thisstate = thisline->state; -+ -+ if (prevline->length == 0 || different_multi -+ (thisfield, prevfield, thislen, prevlen, thisstate, prevstate)) -+ { -+ fwrite (thisline->buffer, sizeof (char), -+ thisline->length, stdout); -+ -+ SWAP_LINES (prevline, thisline); -+ prevfield = thisfield; -+ prevlen = thislen; -+ prevstate = thisstate; -+ } -+ } -+ else -+#endif - if (prevline->length == 0 - || different (thisfield, prevfield, thislen, prevlen)) - { -@@ -322,17 +533,26 @@ - size_t prevlen; - uintmax_t match_count = 0; - bool first_delimiter = true; -+#if HAVE_MBRTOWC -+ mbstate_t prevstate; -+#endif - - if (readlinebuffer (prevline, stdin) == 0) - goto closefiles; - prevfield = find_field (prevline); - prevlen = prevline->length - 1 - (prevfield - prevline->buffer); -+#if HAVE_MBRTOWC -+ prevstate = prevline->state; -+#endif - - while (!feof (stdin)) - { - bool match; - char *thisfield; - size_t thislen; -+#if HAVE_MBRTOWC -+ mbstate_t thisstate; -+#endif - if (readlinebuffer (thisline, stdin) == 0) - { - if (ferror (stdin)) -@@ -341,6 +561,15 @@ - } - thisfield = find_field (thisline); - thislen = thisline->length - 1 - (thisfield - thisline->buffer); -+#if HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1) -+ { -+ thisstate = thisline->state; -+ match = !different_multi (thisfield, prevfield, -+ thislen, prevlen, thisstate, prevstate); -+ } -+ else -+#endif - match = !different (thisfield, prevfield, thislen, prevlen); - match_count += match; - -@@ -373,6 +602,9 @@ - SWAP_LINES (prevline, thisline); - prevfield = thisfield; - prevlen = thislen; -+#if HAVE_MBRTOWC -+ prevstate = thisstate; -+#endif - if (!match) - match_count = 0; - } -@@ -417,6 +649,19 @@ - - atexit (close_stdout); - -+#if HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1) -+ { -+ find_field = find_field_multi; -+ } -+ else -+#endif -+ { -+ find_field = find_field_uni; -+ } -+ -+ -+ - skip_chars = 0; - skip_fields = 0; - check_chars = SIZE_MAX; ---- coreutils-6.8+/src/fold.c.i18n 2007-02-23 12:01:47.000000000 +0000 -+++ coreutils-6.8+/src/fold.c 2007-03-01 15:08:24.000000000 +0000 -@@ -23,11 +23,33 @@ - #include <getopt.h> - #include <sys/types.h> - -+/* Get mbstate_t, mbrtowc(), wcwidth(). */ -+#if HAVE_WCHAR_H -+# include <wchar.h> -+#endif -+ -+/* Get iswprint(), iswblank(), wcwidth(). */ -+#if HAVE_WCTYPE_H -+# include <wctype.h> -+#endif -+ - #include "system.h" - #include "error.h" - #include "quote.h" - #include "xstrtol.h" - -+/* MB_LEN_MAX is incorrectly defined to be 1 in at least one GCC -+ installation; work around this configuration error. */ -+#if !defined MB_LEN_MAX || MB_LEN_MAX < 2 -+# undef MB_LEN_MAX -+# define MB_LEN_MAX 16 -+#endif -+ -+/* Some systems, like BeOS, have multibyte encodings but lack mbstate_t. */ -+#if HAVE_MBRTOWC && defined mbstate_t -+# define mbrtowc(pwc, s, n, ps) (mbrtowc) (pwc, s, n, 0) -+#endif -+ - #define TAB_WIDTH 8 - - /* The official name of this program (e.g., no `g' prefix). */ -@@ -35,23 +57,44 @@ - - #define AUTHORS "David MacKenzie" - -+#define FATAL_ERROR(Message) \ -+ do \ -+ { \ -+ error (0, 0, (Message)); \ -+ usage (2); \ -+ } \ -+ while (0) -+ -+enum operating_mode -+{ -+ /* Fold texts by columns that are at the given positions. */ -+ column_mode, -+ -+ /* Fold texts by bytes that are at the given positions. */ -+ byte_mode, -+ -+ /* Fold texts by characters that are at the given positions. */ -+ character_mode, -+}; -+ - /* The name this program was run with. */ - char *program_name; - -+/* The argument shows current mode. (Default: column_mode) */ -+static enum operating_mode operating_mode; -+ - /* If nonzero, try to break on whitespace. */ - static bool break_spaces; - --/* If nonzero, count bytes, not column positions. */ --static bool count_bytes; -- - /* If nonzero, at least one of the files we read was standard input. */ - static bool have_read_stdin; - --static char const shortopts[] = "bsw:0::1::2::3::4::5::6::7::8::9::"; -+static char const shortopts[] = "bcsw:0::1::2::3::4::5::6::7::8::9::"; - - static struct option const longopts[] = - { - {"bytes", no_argument, NULL, 'b'}, -+ {"characters", no_argument, NULL, 'c'}, - {"spaces", no_argument, NULL, 's'}, - {"width", required_argument, NULL, 'w'}, - {GETOPT_HELP_OPTION_DECL}, -@@ -81,6 +124,7 @@ - "), stdout); - fputs (_("\ - -b, --bytes count bytes rather than columns\n\ -+ -c, --characters count characters rather than columns\n\ - -s, --spaces break at spaces\n\ - -w, --width=WIDTH use WIDTH columns instead of 80\n\ - "), stdout); -@@ -98,7 +142,7 @@ - static size_t - adjust_column (size_t column, char c) - { -- if (!count_bytes) -+ if (operating_mode != byte_mode) - { - if (c == '\b') - { -@@ -121,30 +165,14 @@ - to stdout, with maximum line length WIDTH. - Return true if successful. */ - --static bool --fold_file (char const *filename, size_t width) -+static void -+fold_text (FILE *istream, size_t width, int *saved_errno) - { -- FILE *istream; - int c; - size_t column = 0; /* Screen column where next char will go. */ - size_t offset_out = 0; /* Index in `line_out' for next char. */ - static char *line_out = NULL; - static size_t allocated_out = 0; -- int saved_errno; -- -- if (STREQ (filename, "-")) -- { -- istream = stdin; -- have_read_stdin = true; -- } -- else -- istream = fopen (filename, "r"); -- -- if (istream == NULL) -- { -- error (0, errno, "%s", filename); -- return false; -- } - - while ((c = getc (istream)) != EOF) - { -@@ -172,6 +200,15 @@ - bool found_blank = false; - size_t logical_end = offset_out; - -+ /* If LINE_OUT has no wide character, -+ put a new wide character in LINE_OUT -+ if column is bigger than width. */ -+ if (offset_out == 0) -+ { -+ line_out[offset_out++] = c; -+ continue; -+ } -+ - /* Look for the last blank. */ - while (logical_end) - { -@@ -218,11 +255,225 @@ - line_out[offset_out++] = c; - } - -- saved_errno = errno; -+ *saved_errno = errno; -+ -+ if (offset_out) -+ fwrite (line_out, sizeof (char), (size_t) offset_out, stdout); -+ -+ free(line_out); -+} -+ -+#if HAVE_MBRTOWC -+static void -+fold_multibyte_text (FILE *istream, size_t width, int *saved_errno) -+{ -+ char buf[MB_LEN_MAX + BUFSIZ]; /* For spooling a read byte sequence. */ -+ size_t buflen = 0; /* The length of the byte sequence in buf. */ -+ char *bufpos; /* Next read position of BUF. */ -+ wint_t wc; /* A gotten wide character. */ -+ size_t mblength; /* The byte size of a multibyte character which shows -+ as same character as WC. */ -+ mbstate_t state, state_bak; /* State of the stream. */ -+ int convfail; /* 1, when conversion is failed. Otherwise 0. */ -+ -+ char *line_out = NULL; -+ size_t offset_out = 0; /* Index in `line_out' for next char. */ -+ size_t allocated_out = 0; -+ -+ int increment; -+ size_t column = 0; -+ -+ size_t last_blank_pos; -+ size_t last_blank_column; -+ int is_blank_seen; -+ int last_blank_increment; -+ int is_bs_following_last_blank; -+ size_t bs_following_last_blank_num; -+ int is_cr_after_last_blank; -+ -+#define CLEAR_FLAGS \ -+ do \ -+ { \ -+ last_blank_pos = 0; \ -+ last_blank_column = 0; \ -+ is_blank_seen = 0; \ -+ is_bs_following_last_blank = 0; \ -+ bs_following_last_blank_num = 0; \ -+ is_cr_after_last_blank = 0; \ -+ } \ -+ while (0) -+ -+#define START_NEW_LINE \ -+ do \ -+ { \ -+ putchar ('\n'); \ -+ column = 0; \ -+ offset_out = 0; \ -+ CLEAR_FLAGS; \ -+ } \ -+ while (0) -+ -+ CLEAR_FLAGS; -+ memset (&state, '\0', sizeof(mbstate_t)); -+ -+ for (;; bufpos += mblength, buflen -= mblength) -+ { -+ if (buflen < MB_LEN_MAX && !feof (istream) && !ferror (istream)) -+ { -+ memmove (buf, bufpos, buflen); -+ buflen += fread (buf + buflen, sizeof(char), BUFSIZ, istream); -+ bufpos = buf; -+ } -+ -+ if (buflen < 1) -+ break; -+ -+ /* Get a wide character. */ -+ convfail = 0; -+ state_bak = state; -+ mblength = mbrtowc ((wchar_t *)&wc, bufpos, buflen, &state); -+ -+ switch (mblength) -+ { -+ case (size_t)-1: -+ case (size_t)-2: -+ convfail++; -+ state = state_bak; -+ /* Fall through. */ -+ -+ case 0: -+ mblength = 1; -+ break; -+ } -+ -+rescan: -+ if (operating_mode == byte_mode) /* byte mode */ -+ increment = mblength; -+ else if (operating_mode == character_mode) /* character mode */ -+ increment = 1; -+ else /* column mode */ -+ { -+ if (convfail) -+ increment = 1; -+ else -+ { -+ switch (wc) -+ { -+ case L'\n': -+ fwrite (line_out, sizeof(char), offset_out, stdout); -+ START_NEW_LINE; -+ continue; -+ -+ case L'\b': -+ increment = (column > 0) ? -1 : 0; -+ break; -+ -+ case L'\r': -+ increment = -1 * column; -+ break; -+ -+ case L'\t': -+ increment = 8 - column % 8; -+ break; -+ -+ default: -+ increment = wcwidth (wc); -+ increment = (increment < 0) ? 0 : increment; -+ } -+ } -+ } -+ -+ if (column + increment > width && break_spaces && last_blank_pos) -+ { -+ fwrite (line_out, sizeof(char), last_blank_pos, stdout); -+ putchar ('\n'); -+ -+ offset_out = offset_out - last_blank_pos; -+ column = column - last_blank_column + ((is_cr_after_last_blank) -+ ? last_blank_increment : bs_following_last_blank_num); -+ memmove (line_out, line_out + last_blank_pos, offset_out); -+ CLEAR_FLAGS; -+ goto rescan; -+ } -+ -+ if (column + increment > width && column != 0) -+ { -+ fwrite (line_out, sizeof(char), offset_out, stdout); -+ START_NEW_LINE; -+ goto rescan; -+ } -+ -+ if (allocated_out < offset_out + mblength) -+ { -+ allocated_out += 1024; -+ line_out = xrealloc (line_out, allocated_out); -+ } -+ -+ memcpy (line_out + offset_out, bufpos, mblength); -+ offset_out += mblength; -+ column += increment; -+ -+ if (is_blank_seen && !convfail && wc == L'\r') -+ is_cr_after_last_blank = 1; -+ -+ if (is_bs_following_last_blank && !convfail && wc == L'\b') -+ ++bs_following_last_blank_num; -+ else -+ is_bs_following_last_blank = 0; -+ -+ if (break_spaces && !convfail && iswblank (wc)) -+ { -+ last_blank_pos = offset_out; -+ last_blank_column = column; -+ is_blank_seen = 1; -+ last_blank_increment = increment; -+ is_bs_following_last_blank = 1; -+ bs_following_last_blank_num = 0; -+ is_cr_after_last_blank = 0; -+ } -+ } -+ -+ *saved_errno = errno; - - if (offset_out) - fwrite (line_out, sizeof (char), (size_t) offset_out, stdout); - -+ free(line_out); -+} -+#endif -+ -+/* Fold file FILENAME, or standard input if FILENAME is "-", -+ to stdout, with maximum line length WIDTH. -+ Return 0 if successful, 1 if an error occurs. */ -+ -+static bool -+fold_file (char *filename, size_t width) -+{ -+ FILE *istream; -+ int saved_errno; -+ -+ if (STREQ (filename, "-")) -+ { -+ istream = stdin; -+ have_read_stdin = 1; -+ } -+ else -+ istream = fopen (filename, "r"); -+ -+ if (istream == NULL) -+ { -+ error (0, errno, "%s", filename); -+ return 1; -+ } -+ -+ /* Define how ISTREAM is being folded. */ -+#if HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1) -+ fold_multibyte_text (istream, width, &saved_errno); -+ else -+#endif -+ fold_text (istream, width, &saved_errno); -+ - if (ferror (istream)) - { - error (0, saved_errno, "%s", filename); -@@ -255,7 +506,8 @@ - - atexit (close_stdout); - -- break_spaces = count_bytes = have_read_stdin = false; -+ operating_mode = column_mode; -+ break_spaces = have_read_stdin = false; - - while ((optc = getopt_long (argc, argv, shortopts, longopts, NULL)) != -1) - { -@@ -264,7 +516,15 @@ - switch (optc) - { - case 'b': /* Count bytes rather than columns. */ -- count_bytes = true; -+ if (operating_mode != column_mode) -+ FATAL_ERROR (_("only one way of folding may be specified")); -+ operating_mode = byte_mode; -+ break; -+ -+ case 'c': -+ if (operating_mode != column_mode) -+ FATAL_ERROR (_("only one way of folding may be specified")); -+ operating_mode = character_mode; - break; - - case 's': /* Break at word boundaries. */ ---- coreutils-6.8+/src/sort.c.i18n 2007-02-24 11:23:23.000000000 +0000 -+++ coreutils-6.8+/src/sort.c 2007-03-01 15:10:57.000000000 +0000 -@@ -23,10 +23,19 @@ - - #include <config.h> - -+#include <assert.h> - #include <getopt.h> - #include <sys/types.h> - #include <sys/wait.h> - #include <signal.h> -+#if HAVE_WCHAR_H -+# include <wchar.h> -+#endif -+/* Get isw* functions. */ -+#if HAVE_WCTYPE_H -+# include <wctype.h> -+#endif -+ - #include "system.h" - #include "argmatch.h" - #include "error.h" -@@ -116,14 +125,38 @@ - /* Thousands separator; if -1, then there isn't one. */ - static int thousands_sep; - -+static int force_general_numcompare = 0; -+ - /* Nonzero if the corresponding locales are hard. */ - static bool hard_LC_COLLATE; --#if HAVE_NL_LANGINFO -+#if HAVE_LANGINFO_CODESET - static bool hard_LC_TIME; - #endif - - #define NONZERO(x) ((x) != 0) - -+/* get a multibyte character's byte length. */ -+#define GET_BYTELEN_OF_CHAR(LIM, PTR, MBLENGTH, STATE) \ -+ do \ -+ { \ -+ wchar_t wc; \ -+ mbstate_t state_bak; \ -+ \ -+ state_bak = STATE; \ -+ mblength = mbrtowc (&wc, PTR, LIM - PTR, &STATE); \ -+ \ -+ switch (MBLENGTH) \ -+ { \ -+ case (size_t)-1: \ -+ case (size_t)-2: \ -+ STATE = state_bak; \ -+ /* Fall through. */ \ -+ case 0: \ -+ MBLENGTH = 1; \ -+ } \ -+ } \ -+ while (0) -+ - /* The kind of blanks for '-b' to skip in various options. */ - enum blanktype { bl_start, bl_end, bl_both }; - -@@ -261,13 +294,11 @@ - they were read if all keys compare equal. */ - static bool stable; - --/* If TAB has this value, blanks separate fields. */ --enum { TAB_DEFAULT = CHAR_MAX + 1 }; -- --/* Tab character separating fields. If TAB_DEFAULT, then fields are -+/* Tab character separating fields. If tab_length is 0, then fields are - separated by the empty string between a non-blank character and a blank - character. */ --static int tab = TAB_DEFAULT; -+static char tab[MB_LEN_MAX + 1]; -+static size_t tab_length = 0; - - /* Flag to remove consecutive duplicate lines from the output. - Only the last of a sequence of equal lines will be output. */ -@@ -639,6 +670,44 @@ - update_proc (pid); - } - -+/* Function pointers. */ -+static void -+(*inittables) (void); -+static char * -+(*begfield) (const struct line*, const struct keyfield *); -+static char * -+(*limfield) (const struct line*, const struct keyfield *); -+static int -+(*getmonth) (char const *, size_t); -+static int -+(*keycompare) (const struct line *, const struct line *); -+static int -+(*numcompare) (const char *, const char *); -+ -+/* Test for white space multibyte character. -+ Set LENGTH the byte length of investigated multibyte character. */ -+#if HAVE_MBRTOWC -+static int -+ismbblank (const char *str, size_t len, size_t *length) -+{ -+ size_t mblength; -+ wchar_t wc; -+ mbstate_t state; -+ -+ memset (&state, '\0', sizeof(mbstate_t)); -+ mblength = mbrtowc (&wc, str, len, &state); -+ -+ if (mblength == (size_t)-1 || mblength == (size_t)-2) -+ { -+ *length = 1; -+ return 0; -+ } -+ -+ *length = (mblength < 1) ? 1 : mblength; -+ return iswblank (wc); -+} -+#endif -+ - /* Clean up any remaining temporary files. */ - - static void -@@ -978,7 +1047,7 @@ - free (node); - } - --#if HAVE_NL_LANGINFO -+#if HAVE_LANGINFO_CODESET - - static int - struct_month_cmp (const void *m1, const void *m2) -@@ -993,7 +1062,7 @@ - /* Initialize the character class tables. */ - - static void --inittables (void) -+inittables_uni (void) - { - size_t i; - -@@ -1005,7 +1074,7 @@ - fold_toupper[i] = toupper (i); - } - --#if HAVE_NL_LANGINFO -+#if HAVE_LANGINFO_CODESET - /* If we're not in the "C" locale, read different names for months. */ - if (hard_LC_TIME) - { -@@ -1031,6 +1100,64 @@ - #endif - } - -+#if HAVE_MBRTOWC -+static void -+inittables_mb (void) -+{ -+ int i, j, k, l; -+ char *name, *s; -+ size_t s_len, mblength; -+ char mbc[MB_LEN_MAX]; -+ wchar_t wc, pwc; -+ mbstate_t state_mb, state_wc; -+ -+ for (i = 0; i < MONTHS_PER_YEAR; i++) -+ { -+ s = (char *) nl_langinfo (ABMON_1 + i); -+ s_len = strlen (s); -+ monthtab[i].name = name = (char *) xmalloc (s_len + 1); -+ monthtab[i].val = i + 1; -+ -+ memset (&state_mb, '\0', sizeof (mbstate_t)); -+ memset (&state_wc, '\0', sizeof (mbstate_t)); -+ -+ for (j = 0; j < s_len;) -+ { -+ if (!ismbblank (s + j, s_len - j, &mblength)) -+ break; -+ j += mblength; -+ } -+ -+ for (k = 0; j < s_len;) -+ { -+ mblength = mbrtowc (&wc, (s + j), (s_len - j), &state_mb); -+ assert (mblength != (size_t)-1 && mblength != (size_t)-2); -+ if (mblength == 0) -+ break; -+ -+ pwc = towupper (wc); -+ if (pwc == wc) -+ { -+ memcpy (mbc, s + j, mblength); -+ j += mblength; -+ } -+ else -+ { -+ j += mblength; -+ mblength = wcrtomb (mbc, pwc, &state_wc); -+ assert (mblength != (size_t)0 && mblength != (size_t)-1); -+ } -+ -+ for (l = 0; l < mblength; l++) -+ name[k++] = mbc[l]; -+ } -+ name[k] = '\0'; -+ } -+ qsort ((void *) monthtab, MONTHS_PER_YEAR, -+ sizeof (struct month), struct_month_cmp); -+} -+#endif -+ - /* Specify the amount of main memory to use when sorting. */ - static void - specify_sort_size (char const *s) -@@ -1241,7 +1368,7 @@ - by KEY in LINE. */ - - static char * --begfield (const struct line *line, const struct keyfield *key) -+begfield_uni (const struct line *line, const struct keyfield *key) - { - char *ptr = line->text, *lim = ptr + line->length - 1; - size_t sword = key->sword; -@@ -1251,10 +1378,10 @@ - /* The leading field separator itself is included in a field when -t - is absent. */ - -- if (tab != TAB_DEFAULT) -+ if (tab_length) - while (ptr < lim && sword--) - { -- while (ptr < lim && *ptr != tab) -+ while (ptr < lim && *ptr != tab[0]) - ++ptr; - if (ptr < lim) - ++ptr; -@@ -1282,11 +1409,70 @@ - return ptr; - } - -+#if HAVE_MBRTOWC -+static char * -+begfield_mb (const struct line *line, const struct keyfield *key) -+{ -+ int i; -+ char *ptr = line->text, *lim = ptr + line->length - 1; -+ size_t sword = key->sword; -+ size_t schar = key->schar; -+ size_t mblength; -+ mbstate_t state; -+ -+ memset (&state, '\0', sizeof(mbstate_t)); -+ -+ if (tab_length) -+ while (ptr < lim && sword--) -+ { -+ while (ptr < lim && memcmp (ptr, tab, tab_length) != 0) -+ { -+ GET_BYTELEN_OF_CHAR (lim, ptr, mblength, state); -+ ptr += mblength; -+ } -+ if (ptr < lim) -+ { -+ GET_BYTELEN_OF_CHAR (lim, ptr, mblength, state); -+ ptr += mblength; -+ } -+ } -+ else -+ while (ptr < lim && sword--) -+ { -+ while (ptr < lim && ismbblank (ptr, lim - ptr, &mblength)) -+ ptr += mblength; -+ if (ptr < lim) -+ { -+ GET_BYTELEN_OF_CHAR (lim, ptr, mblength, state); -+ ptr += mblength; -+ } -+ while (ptr < lim && !ismbblank (ptr, lim - ptr, &mblength)) -+ ptr += mblength; -+ } -+ -+ if (key->skipsblanks) -+ while (ptr < lim && ismbblank (ptr, lim - ptr, &mblength)) -+ ptr += mblength; -+ -+ for (i = 0; i < schar; i++) -+ { -+ GET_BYTELEN_OF_CHAR (lim, ptr, mblength, state); -+ -+ if (ptr + mblength > lim) -+ break; -+ else -+ ptr += mblength; -+ } -+ -+ return ptr; -+} -+#endif -+ - /* Return the limit of (a pointer to the first character after) the field - in LINE specified by KEY. */ - - static char * --limfield (const struct line *line, const struct keyfield *key) -+limfield_uni (const struct line *line, const struct keyfield *key) - { - char *ptr = line->text, *lim = ptr + line->length - 1; - size_t eword = key->eword, echar = key->echar; -@@ -1299,10 +1485,10 @@ - `beginning' is the first character following the delimiting TAB. - Otherwise, leave PTR pointing at the first `blank' character after - the preceding field. */ -- if (tab != TAB_DEFAULT) -+ if (tab_length) - while (ptr < lim && eword--) - { -- while (ptr < lim && *ptr != tab) -+ while (ptr < lim && *ptr != tab[0]) - ++ptr; - if (ptr < lim && (eword | echar)) - ++ptr; -@@ -1348,10 +1534,10 @@ - */ - - /* Make LIM point to the end of (one byte past) the current field. */ -- if (tab != TAB_DEFAULT) -+ if (tab_length) - { - char *newlim; -- newlim = memchr (ptr, tab, lim - ptr); -+ newlim = memchr (ptr, tab[0], lim - ptr); - if (newlim) - lim = newlim; - } -@@ -1384,6 +1570,107 @@ - return ptr; - } - -+#if HAVE_MBRTOWC -+static char * -+limfield_mb (const struct line *line, const struct keyfield *key) -+{ -+ char *ptr = line->text, *lim = ptr + line->length - 1; -+ size_t eword = key->eword, echar = key->echar; -+ int i; -+ size_t mblength; -+ mbstate_t state; -+ -+ memset (&state, '\0', sizeof(mbstate_t)); -+ -+ if (tab_length) -+ while (ptr < lim && eword--) -+ { -+ while (ptr < lim && memcmp (ptr, tab, tab_length) != 0) -+ { -+ GET_BYTELEN_OF_CHAR (lim, ptr, mblength, state); -+ ptr += mblength; -+ } -+ if (ptr < lim && (eword | echar)) -+ { -+ GET_BYTELEN_OF_CHAR (lim, ptr, mblength, state); -+ ptr += mblength; -+ } -+ } -+ else -+ while (ptr < lim && eword--) -+ { -+ while (ptr < lim && ismbblank (ptr, lim - ptr, &mblength)) -+ ptr += mblength; -+ if (ptr < lim) -+ { -+ GET_BYTELEN_OF_CHAR (lim, ptr, mblength, state); -+ ptr += mblength; -+ } -+ while (ptr < lim && !ismbblank (ptr, lim - ptr, &mblength)) -+ ptr += mblength; -+ } -+ -+ -+# ifdef POSIX_UNSPECIFIED -+ /* Make LIM point to the end of (one byte past) the current field. */ -+ if (tab_length) -+ { -+ char *newlim, *p; -+ -+ newlim = NULL; -+ for (p = ptr; p < lim;) -+ { -+ if (memcmp (p, tab, tab_length) == 0) -+ { -+ newlim = p; -+ break; -+ } -+ -+ GET_BYTELEN_OF_CHAR (lim, ptr, mblength, state); -+ p += mblength; -+ } -+ } -+ else -+ { -+ char *newlim; -+ newlim = ptr; -+ -+ while (newlim < lim && ismbblank (newlim, lim - newlim, &mblength)) -+ newlim += mblength; -+ if (ptr < lim) -+ { -+ GET_BYTELEN_OF_CHAR (lim, ptr, mblength, state); -+ ptr += mblength; -+ } -+ while (newlim < lim && !ismbblank (newlim, lim - newlim, &mblength)) -+ newlim += mblength; -+ lim = newlim; -+ } -+# endif -+ -+ /* If we're skipping leading blanks, don't start counting characters -+ * until after skipping past any leading blanks. */ -+ if (key->skipsblanks) -+ while (ptr < lim && ismbblank (ptr, lim - ptr, &mblength)) -+ ptr += mblength; -+ -+ memset (&state, '\0', sizeof(mbstate_t)); -+ -+ /* Advance PTR by ECHAR (if possible), but no further than LIM. */ -+ for (i = 0; i < echar; i++) -+ { -+ GET_BYTELEN_OF_CHAR (lim, ptr, mblength, state); -+ -+ if (ptr + mblength > lim) -+ break; -+ else -+ ptr += mblength; -+ } -+ -+ return ptr; -+} -+#endif -+ - /* Fill BUF reading from FP, moving buf->left bytes from the end - of buf->buf to the beginning first. If EOF is reached and the - file wasn't terminated by a newline, supply one. Set up BUF's line -@@ -1466,8 +1753,24 @@ - else - { - if (key->skipsblanks) -- while (blanks[to_uchar (*line_start)]) -- line_start++; -+ { -+#if HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1) -+ { -+ size_t mblength; -+ mbstate_t state; -+ memset (&state, '\0', sizeof(mbstate_t)); -+ while (line_start < line->keylim && -+ ismbblank (line_start, -+ line->keylim - line_start, -+ &mblength)) -+ line_start += mblength; -+ } -+ else -+#endif -+ while (blanks[to_uchar (*line_start)]) -+ line_start++; -+ } - line->keybeg = line_start; - } - } -@@ -1500,7 +1803,7 @@ - hideously fast. */ - - static int --numcompare (const char *a, const char *b) -+numcompare_uni (const char *a, const char *b) - { - while (blanks[to_uchar (*a)]) - a++; -@@ -1510,6 +1813,25 @@ - return strnumcmp (a, b, decimal_point, thousands_sep); - } - -+#if HAVE_MBRTOWC -+static int -+numcompare_mb (const char *a, const char *b) -+{ -+ size_t mblength, len; -+ len = strlen (a); /* okay for UTF-8 */ -+ while (*a && ismbblank (a, len > MB_CUR_MAX ? MB_CUR_MAX : len, &mblength)) -+ { -+ a += mblength; -+ len -= mblength; -+ } -+ len = strlen (b); /* okay for UTF-8 */ -+ while (*b && ismbblank (b, len > MB_CUR_MAX ? MB_CUR_MAX : len, &mblength)) -+ b += mblength; -+ -+ return strnumcmp (a, b, decimal_point, thousands_sep); -+} -+#endif /* HAV_EMBRTOWC */ -+ - static int - general_numcompare (const char *sa, const char *sb) - { -@@ -1543,7 +1865,7 @@ - Return 0 if the name in S is not recognized. */ - - static int --getmonth (char const *month, size_t len) -+getmonth_uni (char const *month, size_t len) - { - size_t lo = 0; - size_t hi = MONTHS_PER_YEAR; -@@ -1698,11 +2020,79 @@ - return diff; - } - -+#if HAVE_MBRTOWC -+static int -+getmonth_mb (const char *s, size_t len) -+{ -+ char *month; -+ register size_t i; -+ register int lo = 0, hi = MONTHS_PER_YEAR, result; -+ char *tmp; -+ size_t wclength, mblength; -+ const char **pp; -+ const wchar_t **wpp; -+ wchar_t *month_wcs; -+ mbstate_t state; -+ -+ while (len > 0 && ismbblank (s, len, &mblength)) -+ { -+ s += mblength; -+ len -= mblength; -+ } -+ -+ if (len == 0) -+ return 0; -+ -+ month = (char *) alloca (len + 1); -+ -+ tmp = (char *) alloca (len + 1); -+ memcpy (tmp, s, len); -+ tmp[len] = '\0'; -+ pp = (const char **)&tmp; -+ month_wcs = (wchar_t *) alloca ((len + 1) * sizeof (wchar_t)); -+ memset (&state, '\0', sizeof(mbstate_t)); -+ -+ wclength = mbsrtowcs (month_wcs, pp, len + 1, &state); -+ assert (wclength != (size_t)-1 && *pp == NULL); -+ -+ for (i = 0; i < wclength; i++) -+ { -+ month_wcs[i] = towupper(month_wcs[i]); -+ if (iswblank (month_wcs[i])) -+ { -+ month_wcs[i] = L'\0'; -+ break; -+ } -+ } -+ -+ wpp = (const wchar_t **)&month_wcs; -+ -+ mblength = wcsrtombs (month, wpp, len + 1, &state); -+ assert (mblength != (-1) && *wpp == NULL); -+ -+ do -+ { -+ int ix = (lo + hi) / 2; -+ -+ if (strncmp (month, monthtab[ix].name, strlen (monthtab[ix].name)) < 0) -+ hi = ix; -+ else -+ lo = ix; -+ } -+ while (hi - lo > 1); -+ -+ result = (!strncmp (month, monthtab[lo].name, strlen (monthtab[lo].name)) -+ ? monthtab[lo].val : 0); -+ -+ return result; -+} -+#endif -+ - /* Compare two lines A and B trying every key in sequence until there - are no more keys or a difference is found. */ - - static int --keycompare (const struct line *a, const struct line *b) -+keycompare_uni (const struct line *a, const struct line *b) - { - struct keyfield const *key = keylist; - -@@ -1875,6 +2265,179 @@ - return key->reverse ? -diff : diff; - } - -+#if HAVE_MBRTOWC -+static int -+keycompare_mb (const struct line *a, const struct line *b) -+{ -+ struct keyfield *key = keylist; -+ -+ /* For the first iteration only, the key positions have been -+ precomputed for us. */ -+ char *texta = a->keybeg; -+ char *textb = b->keybeg; -+ char *lima = a->keylim; -+ char *limb = b->keylim; -+ -+ size_t mblength_a, mblength_b; -+ wchar_t wc_a, wc_b; -+ mbstate_t state_a, state_b; -+ -+ int diff; -+ -+ memset (&state_a, '\0', sizeof(mbstate_t)); -+ memset (&state_b, '\0', sizeof(mbstate_t)); -+ -+ for (;;) -+ { -+ unsigned char *translate = (unsigned char *) key->translate; -+ bool const *ignore = key->ignore; -+ -+ /* Find the lengths. */ -+ size_t lena = lima <= texta ? 0 : lima - texta; -+ size_t lenb = limb <= textb ? 0 : limb - textb; -+ -+ /* Actually compare the fields. */ -+ if (key->random) -+ diff = compare_random (texta, lena, textb, lenb); -+ else if (key->numeric | key->general_numeric) -+ { -+ char savea = *lima, saveb = *limb; -+ -+ *lima = *limb = '\0'; -+ if (force_general_numcompare) -+ diff = general_numcompare (texta, textb); -+ else -+ diff = ((key->numeric ? numcompare : general_numcompare) -+ (texta, textb)); -+ *lima = savea, *limb = saveb; -+ } -+ else if (key->month) -+ diff = getmonth (texta, lena) - getmonth (textb, lenb); -+ else -+ { -+ if (ignore || translate) -+ { -+ char *copy_a = (char *) alloca (lena + 1 + lenb + 1); -+ char *copy_b = copy_a + lena + 1; -+ size_t new_len_a, new_len_b; -+ size_t i, j; -+ -+ /* Ignore and/or translate chars before comparing. */ -+# define IGNORE_CHARS(NEW_LEN, LEN, TEXT, COPY, WC, MBLENGTH, STATE) \ -+ do \ -+ { \ -+ wchar_t uwc; \ -+ char mbc[MB_LEN_MAX]; \ -+ mbstate_t state_wc; \ -+ \ -+ for (NEW_LEN = i = 0; i < LEN;) \ -+ { \ -+ mbstate_t state_bak; \ -+ \ -+ state_bak = STATE; \ -+ MBLENGTH = mbrtowc (&WC, TEXT + i, LEN - i, &STATE); \ -+ \ -+ if (MBLENGTH == (size_t)-2 || MBLENGTH == (size_t)-1 \ -+ || MBLENGTH == 0) \ -+ { \ -+ if (MBLENGTH == (size_t)-2 || MBLENGTH == (size_t)-1) \ -+ STATE = state_bak; \ -+ if (!ignore) \ -+ COPY[NEW_LEN++] = TEXT[i++]; \ -+ continue; \ -+ } \ -+ \ -+ if (ignore) \ -+ { \ -+ if ((ignore == nonprinting && !iswprint (WC)) \ -+ || (ignore == nondictionary \ -+ && !iswalnum (WC) && !iswblank (WC))) \ -+ { \ -+ i += MBLENGTH; \ -+ continue; \ -+ } \ -+ } \ -+ \ -+ if (translate) \ -+ { \ -+ \ -+ uwc = towupper(WC); \ -+ if (WC == uwc) \ -+ { \ -+ memcpy (mbc, TEXT + i, MBLENGTH); \ -+ i += MBLENGTH; \ -+ } \ -+ else \ -+ { \ -+ i += MBLENGTH; \ -+ WC = uwc; \ -+ memset (&state_wc, '\0', sizeof (mbstate_t)); \ -+ \ -+ MBLENGTH = wcrtomb (mbc, WC, &state_wc); \ -+ assert (MBLENGTH != (size_t)-1 && MBLENGTH != 0); \ -+ } \ -+ \ -+ for (j = 0; j < MBLENGTH; j++) \ -+ COPY[NEW_LEN++] = mbc[j]; \ -+ } \ -+ else \ -+ for (j = 0; j < MBLENGTH; j++) \ -+ COPY[NEW_LEN++] = TEXT[i++]; \ -+ } \ -+ COPY[NEW_LEN] = '\0'; \ -+ } \ -+ while (0) -+ IGNORE_CHARS (new_len_a, lena, texta, copy_a, -+ wc_a, mblength_a, state_a); -+ IGNORE_CHARS (new_len_b, lenb, textb, copy_b, -+ wc_b, mblength_b, state_b); -+ diff = xmemcoll (copy_a, new_len_a, copy_b, new_len_b); -+ } -+ else if (lena == 0) -+ diff = - NONZERO (lenb); -+ else if (lenb == 0) -+ goto greater; -+ else -+ diff = xmemcoll (texta, lena, textb, lenb); -+ } -+ -+ if (diff) -+ goto not_equal; -+ -+ key = key->next; -+ if (! key) -+ break; -+ -+ /* Find the beginning and limit of the next field. */ -+ if (key->eword != -1) -+ lima = limfield (a, key), limb = limfield (b, key); -+ else -+ lima = a->text + a->length - 1, limb = b->text + b->length - 1; -+ -+ if (key->sword != -1) -+ texta = begfield (a, key), textb = begfield (b, key); -+ else -+ { -+ texta = a->text, textb = b->text; -+ if (key->skipsblanks) -+ { -+ while (texta < lima && ismbblank (texta, lima - texta, &mblength_a)) -+ texta += mblength_a; -+ while (textb < limb && ismbblank (textb, limb - textb, &mblength_b)) -+ textb += mblength_b; -+ } -+ } -+ } -+ -+ return 0; -+ -+greater: -+ diff = 1; -+not_equal: -+ return key->reverse ? -diff : diff; -+} -+#endif -+ - /* Compare two lines A and B, returning negative, zero, or positive - depending on whether A compares less than, equal to, or greater than B. */ - -@@ -2744,7 +3305,7 @@ - initialize_exit_failure (SORT_FAILURE); - - hard_LC_COLLATE = hard_locale (LC_COLLATE); --#if HAVE_NL_LANGINFO -+#if HAVE_LANGINFO_CODESET - hard_LC_TIME = hard_locale (LC_TIME); - #endif - -@@ -2765,6 +3326,27 @@ - thousands_sep = -1; - } - -+#if HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1) -+ { -+ inittables = inittables_mb; -+ begfield = begfield_mb; -+ limfield = limfield_mb; -+ getmonth = getmonth_mb; -+ keycompare = keycompare_mb; -+ numcompare = numcompare_mb; -+ } -+ else -+#endif -+ { -+ inittables = inittables_uni; -+ begfield = begfield_uni; -+ limfield = limfield_uni; -+ getmonth = getmonth_uni; -+ keycompare = keycompare_uni; -+ numcompare = numcompare_uni; -+ } -+ - have_read_stdin = false; - inittables (); - -@@ -3015,13 +3597,35 @@ - - case 't': - { -- char newtab = optarg[0]; -- if (! newtab) -+ char newtab[MB_LEN_MAX + 1]; -+ size_t newtab_length = 1; -+ strncpy (newtab, optarg, MB_LEN_MAX); -+ if (! newtab[0]) - error (SORT_FAILURE, 0, _("empty tab")); -- if (optarg[1]) -+#if HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1) -+ { -+ wchar_t wc; -+ mbstate_t state; -+ size_t i; -+ -+ memset (&state, '\0', sizeof (mbstate_t)); -+ newtab_length = mbrtowc (&wc, newtab, strnlen (newtab, -+ MB_LEN_MAX), -+ &state); -+ switch (newtab_length) -+ { -+ case (size_t) -1: -+ case (size_t) -2: -+ case 0: -+ newtab_length = 1; -+ } -+ } -+#endif -+ if (newtab_length == 1 && optarg[1]) - { - if (STREQ (optarg, "\\0")) -- newtab = '\0'; -+ newtab[0] = '\0'; - else - { - /* Provoke with `sort -txx'. Complain about -@@ -3032,9 +3636,12 @@ - quote (optarg)); - } - } -- if (tab != TAB_DEFAULT && tab != newtab) -+ if (tab_length -+ && (tab_length != newtab_length -+ || memcmp (tab, newtab, tab_length) != 0)) - error (SORT_FAILURE, 0, _("incompatible tabs")); -- tab = newtab; -+ memcpy (tab, newtab, newtab_length); -+ tab_length = newtab_length; - } - break; - ---- coreutils-6.8+/src/unexpand.c.i18n 2007-01-14 15:41:28.000000000 +0000 -+++ coreutils-6.8+/src/unexpand.c 2007-03-01 15:08:24.000000000 +0000 -@@ -39,11 +39,28 @@ - #include <stdio.h> - #include <getopt.h> - #include <sys/types.h> -+ -+/* Get mbstate_t, mbrtowc(), wcwidth(). */ -+#if HAVE_WCHAR_H -+# include <wchar.h> -+#endif -+ - #include "system.h" - #include "error.h" - #include "quote.h" - #include "xstrndup.h" - -+/* MB_LEN_MAX is incorrectly defined to be 1 in at least one GCC -+ installation; work around this configuration error. */ -+#if !defined MB_LEN_MAX || MB_LEN_MAX < 2 -+# define MB_LEN_MAX 16 -+#endif -+ -+/* Some systems, like BeOS, have multibyte encodings but lack mbstate_t. */ -+#if HAVE_MBRTOWC && defined mbstate_t -+# define mbrtowc(pwc, s, n, ps) (mbrtowc) (pwc, s, n, 0) -+#endif -+ - /* The official name of this program (e.g., no `g' prefix). */ - #define PROGRAM_NAME "unexpand" - -@@ -110,6 +127,208 @@ - {NULL, 0, NULL, 0} - }; - -+static FILE *next_file (FILE *fp); -+ -+#if HAVE_MBRTOWC -+static void -+unexpand_multibyte (void) -+{ -+ FILE *fp; /* Input stream. */ -+ mbstate_t i_state; /* Current shift state of the input stream. */ -+ mbstate_t i_state_bak; /* Back up the I_STATE. */ -+ mbstate_t o_state; /* Current shift state of the output stream. */ -+ char buf[MB_LEN_MAX + BUFSIZ]; /* For spooling a read byte sequence. */ -+ char *bufpos; /* Next read position of BUF. */ -+ size_t buflen = 0; /* The length of the byte sequence in buf. */ -+ wint_t wc; /* A gotten wide character. */ -+ size_t mblength; /* The byte size of a multibyte character -+ which shows as same character as WC. */ -+ -+ /* Index in `tab_list' of next tabstop: */ -+ int tab_index = 0; /* For calculating width of pending tabs. */ -+ int print_tab_index = 0; /* For printing as many tabs as possible. */ -+ unsigned int column = 0; /* Column on screen of next char. */ -+ int next_tab_column; /* Column the next tab stop is on. */ -+ int convert = 1; /* If nonzero, perform translations. */ -+ unsigned int pending = 0; /* Pending columns of blanks. */ -+ -+ fp = next_file ((FILE *) NULL); -+ if (fp == NULL) -+ return; -+ -+ memset (&o_state, '\0', sizeof(mbstate_t)); -+ memset (&i_state, '\0', sizeof(mbstate_t)); -+ -+ for (;;) -+ { -+ if (buflen < MB_LEN_MAX && !feof(fp) && !ferror(fp)) -+ { -+ memmove (buf, bufpos, buflen); -+ buflen += fread (buf + buflen, sizeof(char), BUFSIZ, fp); -+ bufpos = buf; -+ } -+ -+ /* Get a wide character. */ -+ if (buflen < 1) -+ { -+ mblength = 1; -+ wc = WEOF; -+ } -+ else -+ { -+ i_state_bak = i_state; -+ mblength = mbrtowc ((wchar_t *)&wc, bufpos, buflen, &i_state); -+ } -+ -+ if (mblength == (size_t)-1 || mblength == (size_t)-2) -+ { -+ i_state = i_state_bak; -+ wc = L'\0'; -+ } -+ -+ if (wc == L' ' && convert && column < INT_MAX) -+ { -+ ++pending; -+ ++column; -+ } -+ else if (wc == L'\t' && convert) -+ { -+ if (tab_size == 0) -+ { -+ /* Do not let tab_index == first_free_tab; -+ stop when it is 1 less. */ -+ while (tab_index < first_free_tab - 1 -+ && column >= tab_list[tab_index]) -+ tab_index++; -+ next_tab_column = tab_list[tab_index]; -+ if (tab_index < first_free_tab - 1) -+ tab_index++; -+ if (column >= next_tab_column) -+ { -+ convert = 0; /* Ran out of tab stops. */ -+ goto flush_pend_mb; -+ } -+ } -+ else -+ { -+ next_tab_column = column + tab_size - column % tab_size; -+ } -+ pending += next_tab_column - column; -+ column = next_tab_column; -+ } -+ else -+ { -+flush_pend_mb: -+ /* Flush pending spaces. Print as many tabs as possible, -+ then print the rest as spaces. */ -+ if (pending == 1) -+ { -+ putchar (' '); -+ pending = 0; -+ } -+ column -= pending; -+ while (pending > 0) -+ { -+ if (tab_size == 0) -+ { -+ /* Do not let print_tab_index == first_free_tab; -+ stop when it is 1 less. */ -+ while (print_tab_index < first_free_tab - 1 -+ && column >= tab_list[print_tab_index]) -+ print_tab_index++; -+ next_tab_column = tab_list[print_tab_index]; -+ if (print_tab_index < first_free_tab - 1) -+ print_tab_index++; -+ } -+ else -+ { -+ next_tab_column = -+ column + tab_size - column % tab_size; -+ } -+ if (next_tab_column - column <= pending) -+ { -+ putchar ('\t'); -+ pending -= next_tab_column - column; -+ column = next_tab_column; -+ } -+ else -+ { -+ --print_tab_index; -+ column += pending; -+ while (pending != 0) -+ { -+ putchar (' '); -+ pending--; -+ } -+ } -+ } -+ -+ if (wc == WEOF) -+ { -+ fp = next_file (fp); -+ if (fp == NULL) -+ break; /* No more files. */ -+ else -+ { -+ memset (&i_state, '\0', sizeof(mbstate_t)); -+ continue; -+ } -+ } -+ -+ if (mblength == (size_t)-1 || mblength == (size_t)-2) -+ { -+ if (convert) -+ { -+ ++column; -+ if (convert_entire_line == 0) -+ convert = 0; -+ } -+ mblength = 1; -+ putchar (buf[0]); -+ } -+ else if (mblength == 0) -+ { -+ if (convert && convert_entire_line == 0) -+ convert = 0; -+ mblength = 1; -+ putchar ('\0'); -+ } -+ else -+ { -+ if (convert) -+ { -+ if (wc == L'\b') -+ { -+ if (column > 0) -+ --column; -+ } -+ else -+ { -+ int width; /* The width of WC. */ -+ -+ width = wcwidth (wc); -+ column += (width > 0) ? width : 0; -+ if (convert_entire_line == 0) -+ convert = 0; -+ } -+ } -+ -+ if (wc == L'\n') -+ { -+ tab_index = print_tab_index = 0; -+ column = pending = 0; -+ convert = 1; -+ } -+ fwrite (bufpos, sizeof(char), mblength, stdout); -+ } -+ } -+ buflen -= mblength; -+ bufpos += mblength; -+ } -+} -+#endif -+ -+ - void - usage (int status) - { -@@ -531,7 +750,12 @@ - - file_list = (optind < argc ? &argv[optind] : stdin_argv); - -- unexpand (); -+#if HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1) -+ unexpand_multibyte (); -+ else -+#endif -+ unexpand (); - - if (have_read_stdin && fclose (stdin) != 0) - error (EXIT_FAILURE, errno, "-"); ---- coreutils-6.8+/src/pr.c.i18n 2007-01-14 15:41:28.000000000 +0000 -+++ coreutils-6.8+/src/pr.c 2007-03-01 15:08:24.000000000 +0000 -@@ -313,6 +313,32 @@ - - #include <getopt.h> - #include <sys/types.h> -+ -+/* Get MB_LEN_MAX. */ -+#include <limits.h> -+/* MB_LEN_MAX is incorrectly defined to be 1 in at least one GCC -+ installation; work around this configuration error. */ -+#if !defined MB_LEN_MAX || MB_LEN_MAX == 1 -+# define MB_LEN_MAX 16 -+#endif -+ -+/* Get MB_CUR_MAX. */ -+#include <stdlib.h> -+ -+/* Solaris 2.5 has a bug: <wchar.h> must be included before <wctype.h>. */ -+/* Get mbstate_t, mbrtowc(), wcwidth(). */ -+#if HAVE_WCHAR_H -+# include <wchar.h> -+#endif -+ -+/* Get iswprint(). -- for wcwidth(). */ -+#if HAVE_WCTYPE_H -+# include <wctype.h> -+#endif -+#if !defined iswprint && !HAVE_ISWPRINT -+# define iswprint(wc) 1 -+#endif -+ - #include "system.h" - #include "error.h" - #include "hard-locale.h" -@@ -324,6 +350,18 @@ - #include "strftime.h" - #include "xstrtol.h" - -+/* Some systems, like BeOS, have multibyte encodings but lack mbstate_t. */ -+#if HAVE_MBRTOWC && defined mbstate_t -+# define mbrtowc(pwc, s, n, ps) (mbrtowc) (pwc, s, n, 0) -+#endif -+ -+#ifndef HAVE_DECL_WCWIDTH -+"this configure-time declaration test was not run" -+#endif -+#if !HAVE_DECL_WCWIDTH -+extern int wcwidth (); -+#endif -+ - /* The official name of this program (e.g., no `g' prefix). */ - #define PROGRAM_NAME "pr" - -@@ -416,7 +454,20 @@ - - #define NULLCOL (COLUMN *)0 - --static int char_to_clump (char c); -+/* Funtion pointers to switch functions for single byte locale or for -+ multibyte locale. If multibyte functions do not exist in your sysytem, -+ these pointers always point the function for single byte locale. */ -+static void (*print_char) (char c); -+static int (*char_to_clump) (char c); -+ -+/* Functions for single byte locale. */ -+static void print_char_single (char c); -+static int char_to_clump_single (char c); -+ -+/* Functions for multibyte locale. */ -+static void print_char_multi (char c); -+static int char_to_clump_multi (char c); -+ - static bool read_line (COLUMN *p); - static bool print_page (void); - static bool print_stored (COLUMN *p); -@@ -426,6 +477,7 @@ - static void pad_across_to (int position); - static void add_line_number (COLUMN *p); - static void getoptarg (char *arg, char switch_char, char *character, -+ int *character_length, int *character_width, - int *number); - void usage (int status); - static void print_files (int number_of_files, char **av); -@@ -440,7 +492,6 @@ - static void pad_down (int lines); - static void read_rest_of_line (COLUMN *p); - static void skip_read (COLUMN *p, int column_number); --static void print_char (char c); - static void cleanup (void); - static void print_sep_string (void); - static void separator_string (const char *optarg_S); -@@ -455,7 +506,7 @@ - we store the leftmost columns contiguously in buff. - To print a line from buff, get the index of the first character - from line_vector[i], and print up to line_vector[i + 1]. */ --static char *buff; -+static unsigned char *buff; - - /* Index of the position in buff where the next character - will be stored. */ -@@ -559,7 +610,7 @@ - static bool untabify_input = false; - - /* (-e) The input tab character. */ --static char input_tab_char = '\t'; -+static char input_tab_char[MB_LEN_MAX] = "\t"; - - /* (-e) Tabstops are at chars_per_tab, 2*chars_per_tab, 3*chars_per_tab, ... - where the leftmost column is 1. */ -@@ -569,7 +620,10 @@ - static bool tabify_output = false; - - /* (-i) The output tab character. */ --static char output_tab_char = '\t'; -+static char output_tab_char[MB_LEN_MAX] = "\t"; -+ -+/* (-i) The byte length of output tab character. */ -+static int output_tab_char_length = 1; - - /* (-i) The width of the output tab. */ - static int chars_per_output_tab = 8; -@@ -643,7 +697,13 @@ - static bool numbered_lines = false; - - /* (-n) Character which follows each line number. */ --static char number_separator = '\t'; -+static char number_separator[MB_LEN_MAX] = "\t"; -+ -+/* (-n) The byte length of the character which follows each line number. */ -+static int number_separator_length = 1; -+ -+/* (-n) The character width of the character which follows each line number. */ -+static int number_separator_width = 0; - - /* (-n) line counting starts with 1st line of input file (not with 1st - line of 1st page printed). */ -@@ -696,6 +756,7 @@ - -a|COLUMN|-m is a `space' and with the -J option a `tab'. */ - static char *col_sep_string = ""; - static int col_sep_length = 0; -+static int col_sep_width = 0; - static char *column_separator = " "; - static char *line_separator = "\t"; - -@@ -852,6 +913,13 @@ - col_sep_length = (int) strlen (optarg_S); - col_sep_string = xmalloc (col_sep_length + 1); - strcpy (col_sep_string, optarg_S); -+ -+#if HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1) -+ col_sep_width = mbswidth (col_sep_string, 0); -+ else -+#endif -+ col_sep_width = col_sep_length; - } - - int -@@ -877,6 +945,21 @@ - - atexit (close_stdout); - -+/* Define which functions are used, the ones for single byte locale or the ones -+ for multibyte locale. */ -+#if HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1) -+ { -+ print_char = print_char_multi; -+ char_to_clump = char_to_clump_multi; -+ } -+ else -+#endif -+ { -+ print_char = print_char_single; -+ char_to_clump = char_to_clump_single; -+ } -+ - n_files = 0; - file_names = (argc > 1 - ? xmalloc ((argc - 1) * sizeof (char *)) -@@ -949,8 +1032,12 @@ - break; - case 'e': - if (optarg) -- getoptarg (optarg, 'e', &input_tab_char, -- &chars_per_input_tab); -+ { -+ int dummy_length, dummy_width; -+ -+ getoptarg (optarg, 'e', input_tab_char, &dummy_length, -+ &dummy_width, &chars_per_input_tab); -+ } - /* Could check tab width > 0. */ - untabify_input = true; - break; -@@ -963,8 +1050,12 @@ - break; - case 'i': - if (optarg) -- getoptarg (optarg, 'i', &output_tab_char, -- &chars_per_output_tab); -+ { -+ int dummy_width; -+ -+ getoptarg (optarg, 'i', output_tab_char, &output_tab_char_length, -+ &dummy_width, &chars_per_output_tab); -+ } - /* Could check tab width > 0. */ - tabify_output = true; - break; -@@ -991,8 +1082,8 @@ - case 'n': - numbered_lines = true; - if (optarg) -- getoptarg (optarg, 'n', &number_separator, -- &chars_per_number); -+ getoptarg (optarg, 'n', number_separator, &number_separator_length, -+ &number_separator_width, &chars_per_number); - break; - case 'N': - skip_count = false; -@@ -1031,7 +1122,7 @@ - old_s = false; - /* Reset an additional input of -s, -S dominates -s */ - col_sep_string = ""; -- col_sep_length = 0; -+ col_sep_length = col_sep_width = 0; - use_col_separator = true; - if (optarg) - separator_string (optarg); -@@ -1188,10 +1279,45 @@ - a number. */ - - static void --getoptarg (char *arg, char switch_char, char *character, int *number) -+getoptarg (char *arg, char switch_char, char *character, int *character_length, -+ int *character_width, int *number) - { - if (!ISDIGIT (*arg)) -- *character = *arg++; -+ { -+#ifdef HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1) /* for multibyte locale. */ -+ { -+ wchar_t wc; -+ size_t mblength; -+ int width; -+ mbstate_t state = {'\0'}; -+ -+ mblength = mbrtowc (&wc, arg, strnlen(arg, MB_LEN_MAX), &state); -+ -+ if (mblength == (size_t)-1 || mblength == (size_t)-2) -+ { -+ *character_length = 1; -+ *character_width = 1; -+ } -+ else -+ { -+ *character_length = (mblength < 1) ? 1 : mblength; -+ width = wcwidth (wc); -+ *character_width = (width < 0) ? 0 : width; -+ } -+ -+ strncpy (character, arg, *character_length); -+ arg += *character_length; -+ } -+ else /* for single byte locale. */ -+#endif -+ { -+ *character = *arg++; -+ *character_length = 1; -+ *character_width = 1; -+ } -+ } -+ - if (*arg) - { - long int tmp_long; -@@ -1256,7 +1382,7 @@ - else - col_sep_string = column_separator; - -- col_sep_length = 1; -+ col_sep_length = col_sep_width = 1; - use_col_separator = true; - } - /* It's rather pointless to define a TAB separator with column -@@ -1288,11 +1414,11 @@ - TAB_WIDTH (chars_per_input_tab, chars_per_number); */ - - /* Estimate chars_per_text without any margin and keep it constant. */ -- if (number_separator == '\t') -+ if (number_separator[0] == '\t') - number_width = chars_per_number + - TAB_WIDTH (chars_per_default_tab, chars_per_number); - else -- number_width = chars_per_number + 1; -+ number_width = chars_per_number + number_separator_width; - - /* The number is part of the column width unless we are - printing files in parallel. */ -@@ -1307,7 +1433,7 @@ - } - - chars_per_column = (chars_per_line - chars_used_by_number - -- (columns - 1) * col_sep_length) / columns; -+ (columns - 1) * col_sep_width) / columns; - - if (chars_per_column < 1) - error (EXIT_FAILURE, 0, _("page width too narrow")); -@@ -1432,7 +1558,7 @@ - - /* Enlarge p->start_position of first column to use the same form of - padding_not_printed with all columns. */ -- h = h + col_sep_length; -+ h = h + col_sep_width; - - /* This loop takes care of all but the rightmost column. */ - -@@ -1466,7 +1592,7 @@ - } - else - { -- h = h_next + col_sep_length; -+ h = h_next + col_sep_width; - h_next = h + chars_per_column; - } - } -@@ -1756,9 +1882,9 @@ - align_column (COLUMN *p) - { - padding_not_printed = p->start_position; -- if (padding_not_printed - col_sep_length > 0) -+ if (padding_not_printed - col_sep_width > 0) - { -- pad_across_to (padding_not_printed - col_sep_length); -+ pad_across_to (padding_not_printed - col_sep_width); - padding_not_printed = ANYWHERE; - } - -@@ -2029,13 +2155,13 @@ - /* May be too generous. */ - buff = X2REALLOC (buff, &buff_allocated); - } -- buff[buff_current++] = c; -+ buff[buff_current++] = (unsigned char) c; - } - - static void - add_line_number (COLUMN *p) - { -- int i; -+ int i, j; - char *s; - int left_cut; - -@@ -2058,22 +2184,24 @@ - /* Tabification is assumed for multiple columns, also for n-separators, - but `default n-separator = TAB' hasn't been given priority over - equal column_width also specified by POSIX. */ -- if (number_separator == '\t') -+ if (number_separator[0] == '\t') - { - i = number_width - chars_per_number; - while (i-- > 0) - (p->char_func) (' '); - } - else -- (p->char_func) (number_separator); -+ for (j = 0; j < number_separator_length; j++) -+ (p->char_func) (number_separator[j]); - } - else - /* To comply with POSIX, we avoid any expansion of default TAB - separator with a single column output. No column_width requirement - has to be considered. */ - { -- (p->char_func) (number_separator); -- if (number_separator == '\t') -+ for (j = 0; j < number_separator_length; j++) -+ (p->char_func) (number_separator[j]); -+ if (number_separator[0] == '\t') - output_position = POS_AFTER_TAB (chars_per_output_tab, - output_position); - } -@@ -2234,7 +2362,7 @@ - while (goal - h_old > 1 - && (h_new = POS_AFTER_TAB (chars_per_output_tab, h_old)) <= goal) - { -- putchar (output_tab_char); -+ fwrite (output_tab_char, sizeof(char), output_tab_char_length, stdout); - h_old = h_new; - } - while (++h_old <= goal) -@@ -2254,6 +2382,7 @@ - { - char *s; - int l = col_sep_length; -+ int not_space_flag; - - s = col_sep_string; - -@@ -2267,6 +2396,7 @@ - { - for (; separators_not_printed > 0; --separators_not_printed) - { -+ not_space_flag = 0; - while (l-- > 0) - { - /* 3 types of sep_strings: spaces only, spaces and chars, -@@ -2280,12 +2410,15 @@ - } - else - { -+ not_space_flag = 1; - if (spaces_not_printed > 0) - print_white_space (); - putchar (*s++); -- ++output_position; - } - } -+ if (not_space_flag) -+ output_position += col_sep_width; -+ - /* sep_string ends with some spaces */ - if (spaces_not_printed > 0) - print_white_space (); -@@ -2313,7 +2446,7 @@ - required number of tabs and spaces. */ - - static void --print_char (char c) -+print_char_single (char c) - { - if (tabify_output) - { -@@ -2337,6 +2470,74 @@ - putchar (c); - } - -+#ifdef HAVE_MBRTOWC -+static void -+print_char_multi (char c) -+{ -+ static size_t mbc_pos = 0; -+ static char mbc[MB_LEN_MAX] = {'\0'}; -+ static mbstate_t state = {'\0'}; -+ mbstate_t state_bak; -+ wchar_t wc; -+ size_t mblength; -+ int width; -+ -+ if (tabify_output) -+ { -+ state_bak = state; -+ mbc[mbc_pos++] = c; -+ mblength = mbrtowc (&wc, mbc, mbc_pos, &state); -+ -+ while (mbc_pos > 0) -+ { -+ switch (mblength) -+ { -+ case (size_t)-2: -+ state = state_bak; -+ return; -+ -+ case (size_t)-1: -+ state = state_bak; -+ ++output_position; -+ putchar (mbc[0]); -+ memmove (mbc, mbc + 1, MB_CUR_MAX - 1); -+ --mbc_pos; -+ break; -+ -+ case 0: -+ mblength = 1; -+ -+ default: -+ if (wc == L' ') -+ { -+ memmove (mbc, mbc + mblength, MB_CUR_MAX - mblength); -+ --mbc_pos; -+ ++spaces_not_printed; -+ return; -+ } -+ else if (spaces_not_printed > 0) -+ print_white_space (); -+ -+ /* Nonprintables are assumed to have width 0, except L'\b'. */ -+ if ((width = wcwidth (wc)) < 1) -+ { -+ if (wc == L'\b') -+ --output_position; -+ } -+ else -+ output_position += width; -+ -+ fwrite (mbc, sizeof(char), mblength, stdout); -+ memmove (mbc, mbc + mblength, MB_CUR_MAX - mblength); -+ mbc_pos -= mblength; -+ } -+ } -+ return; -+ } -+ putchar (c); -+} -+#endif -+ - /* Skip to page PAGE before printing. - PAGE may be larger than total number of pages. */ - -@@ -2517,9 +2718,9 @@ - align_empty_cols = false; - } - -- if (padding_not_printed - col_sep_length > 0) -+ if (padding_not_printed - col_sep_width > 0) - { -- pad_across_to (padding_not_printed - col_sep_length); -+ pad_across_to (padding_not_printed - col_sep_width); - padding_not_printed = ANYWHERE; - } - -@@ -2620,9 +2821,9 @@ - } - } - -- if (padding_not_printed - col_sep_length > 0) -+ if (padding_not_printed - col_sep_width > 0) - { -- pad_across_to (padding_not_printed - col_sep_length); -+ pad_across_to (padding_not_printed - col_sep_width); - padding_not_printed = ANYWHERE; - } - -@@ -2635,8 +2836,8 @@ - if (spaces_not_printed == 0) - { - output_position = p->start_position + end_vector[line]; -- if (p->start_position - col_sep_length == chars_per_margin) -- output_position -= col_sep_length; -+ if (p->start_position - col_sep_width == chars_per_margin) -+ output_position -= col_sep_width; - } - - return true; -@@ -2655,7 +2856,7 @@ - number of characters is 1.) */ - - static int --char_to_clump (char c) -+char_to_clump_single (char c) - { - unsigned char uc = c; - char *s = clump_buff; -@@ -2665,10 +2866,10 @@ - int chars; - int chars_per_c = 8; - -- if (c == input_tab_char) -+ if (c == input_tab_char[0]) - chars_per_c = chars_per_input_tab; - -- if (c == input_tab_char || c == '\t') -+ if (c == input_tab_char[0] || c == '\t') - { - width = TAB_WIDTH (chars_per_c, input_position); - -@@ -2739,6 +2940,154 @@ - return chars; - } - -+#ifdef HAVE_MBRTOWC -+static int -+char_to_clump_multi (char c) -+{ -+ static size_t mbc_pos = 0; -+ static char mbc[MB_LEN_MAX] = {'\0'}; -+ static mbstate_t state = {'\0'}; -+ mbstate_t state_bak; -+ wchar_t wc; -+ size_t mblength; -+ int wc_width; -+ register char *s = clump_buff; -+ register int i, j; -+ char esc_buff[4]; -+ int width; -+ int chars; -+ int chars_per_c = 8; -+ -+ state_bak = state; -+ mbc[mbc_pos++] = c; -+ mblength = mbrtowc (&wc, mbc, mbc_pos, &state); -+ -+ width = 0; -+ chars = 0; -+ while (mbc_pos > 0) -+ { -+ switch (mblength) -+ { -+ case (size_t)-2: -+ state = state_bak; -+ return 0; -+ -+ case (size_t)-1: -+ state = state_bak; -+ mblength = 1; -+ -+ if (use_esc_sequence || use_cntrl_prefix) -+ { -+ width = +4; -+ chars = +4; -+ *s++ = '\\'; -+ sprintf (esc_buff, "%03o", mbc[0]); -+ for (i = 0; i <= 2; ++i) -+ *s++ = (int) esc_buff[i]; -+ } -+ else -+ { -+ width += 1; -+ chars += 1; -+ *s++ = mbc[0]; -+ } -+ break; -+ -+ case 0: -+ mblength = 1; -+ /* Fall through */ -+ -+ default: -+ if (memcmp (mbc, input_tab_char, mblength) == 0) -+ chars_per_c = chars_per_input_tab; -+ -+ if (memcmp (mbc, input_tab_char, mblength) == 0 || c == '\t') -+ { -+ int width_inc; -+ -+ width_inc = TAB_WIDTH (chars_per_c, input_position); -+ width += width_inc; -+ -+ if (untabify_input) -+ { -+ for (i = width_inc; i; --i) -+ *s++ = ' '; -+ chars += width_inc; -+ } -+ else -+ { -+ for (i = 0; i < mblength; i++) -+ *s++ = mbc[i]; -+ chars += mblength; -+ } -+ } -+ else if ((wc_width = wcwidth (wc)) < 1) -+ { -+ if (use_esc_sequence) -+ { -+ for (i = 0; i < mblength; i++) -+ { -+ width += 4; -+ chars += 4; -+ *s++ = '\\'; -+ sprintf (esc_buff, "%03o", c); -+ for (j = 0; j <= 2; ++j) -+ *s++ = (int) esc_buff[j]; -+ } -+ } -+ else if (use_cntrl_prefix) -+ { -+ if (wc < 0200) -+ { -+ width += 2; -+ chars += 2; -+ *s++ = '^'; -+ *s++ = wc ^ 0100; -+ } -+ else -+ { -+ for (i = 0; i < mblength; i++) -+ { -+ width += 4; -+ chars += 4; -+ *s++ = '\\'; -+ sprintf (esc_buff, "%03o", c); -+ for (j = 0; j <= 2; ++j) -+ *s++ = (int) esc_buff[j]; -+ } -+ } -+ } -+ else if (wc == L'\b') -+ { -+ width += -1; -+ chars += 1; -+ *s++ = c; -+ } -+ else -+ { -+ width += 0; -+ chars += mblength; -+ for (i = 0; i < mblength; i++) -+ *s++ = mbc[i]; -+ } -+ } -+ else -+ { -+ width += wc_width; -+ chars += mblength; -+ for (i = 0; i < mblength; i++) -+ *s++ = mbc[i]; -+ } -+ } -+ memmove (mbc, mbc + mblength, MB_CUR_MAX - mblength); -+ mbc_pos -= mblength; -+ } -+ -+ input_position += width; -+ return chars; -+} -+#endif -+ - /* We've just printed some files and need to clean up things before - looking for more options and printing the next batch of files. - ---- coreutils-6.8+/src/cut.c.i18n 2007-01-14 15:41:28.000000000 +0000 -+++ coreutils-6.8+/src/cut.c 2007-03-01 15:08:24.000000000 +0000 -@@ -29,6 +29,11 @@ - #include <assert.h> - #include <getopt.h> - #include <sys/types.h> -+ -+/* Get mbstate_t, mbrtowc(). */ -+#if HAVE_WCHAR_H -+# include <wchar.h> -+#endif - #include "system.h" - - #include "error.h" -@@ -37,6 +42,18 @@ - #include "quote.h" - #include "xstrndup.h" - -+/* MB_LEN_MAX is incorrectly defined to be 1 in at least one GCC -+ installation; work around this configuration error. */ -+#if !defined MB_LEN_MAX || MB_LEN_MAX < 2 -+# undef MB_LEN_MAX -+# define MB_LEN_MAX 16 -+#endif -+ -+/* Some systems, like BeOS, have multibyte encodings but lack mbstate_t. */ -+#if HAVE_MBRTOWC && defined mbstate_t -+# define mbrtowc(pwc, s, n, ps) (mbrtowc) (pwc, s, n, 0) -+#endif -+ - /* The official name of this program (e.g., no `g' prefix). */ - #define PROGRAM_NAME "cut" - -@@ -67,6 +84,52 @@ - } \ - while (0) - -+/* Refill the buffer BUF to get a multibyte character. */ -+#define REFILL_BUFFER(BUF, BUFPOS, BUFLEN, STREAM) \ -+ do \ -+ { \ -+ if (BUFLEN < MB_LEN_MAX && !feof (STREAM) && !ferror (STREAM)) \ -+ { \ -+ memmove (BUF, BUFPOS, BUFLEN); \ -+ BUFLEN += fread (BUF + BUFLEN, sizeof(char), BUFSIZ, STREAM); \ -+ BUFPOS = BUF; \ -+ } \ -+ } \ -+ while (0) -+ -+/* Get wide character on BUFPOS. BUFPOS is not included after that. -+ If byte sequence is not valid as a character, CONVFAIL is 1. Otherwise 0. */ -+#define GET_NEXT_WC_FROM_BUFFER(WC, BUFPOS, BUFLEN, MBLENGTH, STATE, CONVFAIL) \ -+ do \ -+ { \ -+ mbstate_t state_bak; \ -+ \ -+ if (BUFLEN < 1) \ -+ { \ -+ WC = WEOF; \ -+ break; \ -+ } \ -+ \ -+ /* Get a wide character. */ \ -+ CONVFAIL = 0; \ -+ state_bak = STATE; \ -+ MBLENGTH = mbrtowc ((wchar_t *)&WC, BUFPOS, BUFLEN, &STATE); \ -+ \ -+ switch (MBLENGTH) \ -+ { \ -+ case (size_t)-1: \ -+ case (size_t)-2: \ -+ CONVFAIL++; \ -+ STATE = state_bak; \ -+ /* Fall througn. */ \ -+ \ -+ case 0: \ -+ MBLENGTH = 1; \ -+ break; \ -+ } \ -+ } \ -+ while (0) -+ - struct range_pair - { - size_t lo; -@@ -85,7 +148,7 @@ - /* The number of bytes allocated for FIELD_1_BUFFER. */ - static size_t field_1_bufsize; - --/* The largest field or byte index used as an endpoint of a closed -+/* The largest byte, character or field index used as an endpoint of a closed - or degenerate range specification; this doesn't include the starting - index of right-open-ended ranges. For example, with either range spec - `2-5,9-', `2-3,5,9-' this variable would be set to 5. */ -@@ -97,10 +160,11 @@ - - /* This is a bit vector. - In byte mode, which bytes to output. -+ In character mode, which characters to output. - In field mode, which DELIM-separated fields to output. -- Both bytes and fields are numbered starting with 1, -+ Bytes, characters and fields are numbered starting with 1, - so the zeroth bit of this array is unused. -- A field or byte K has been selected if -+ A byte, character or field K has been selected if - (K <= MAX_RANGE_ENDPOINT and is_printable_field(K)) - || (EOL_RANGE_START > 0 && K >= EOL_RANGE_START). */ - static unsigned char *printable_field; -@@ -109,9 +173,12 @@ - { - undefined_mode, - -- /* Output characters that are in the given bytes. */ -+ /* Output bytes that are at the given positions. */ - byte_mode, - -+ /* Output characters that are at the given positions. */ -+ character_mode, -+ - /* Output the given delimeter-separated fields. */ - field_mode - }; -@@ -121,6 +188,13 @@ - - static enum operating_mode operating_mode; - -+/* If nonzero, when in byte mode, don't split multibyte characters. */ -+static int byte_mode_character_aware; -+ -+/* If nonzero, the function for single byte locale is work -+ if this program runs on multibyte locale. */ -+static int force_singlebyte_mode; -+ - /* If true do not output lines containing no delimeter characters. - Otherwise, all such lines are printed. This option is valid only - with field mode. */ -@@ -132,6 +206,9 @@ - - /* The delimeter character for field mode. */ - static unsigned char delim; -+#if HAVE_WCHAR_H -+static wchar_t wcdelim; -+#endif - - /* True if the --output-delimiter=STRING option was specified. */ - static bool output_delimiter_specified; -@@ -205,7 +282,7 @@ - -f, --fields=LIST select only these fields; also print any line\n\ - that contains no delimiter character, unless\n\ - the -s option is specified\n\ -- -n (ignored)\n\ -+ -n with -b: don't split multibyte characters\n\ - "), stdout); - fputs (_("\ - --complement complement the set of selected bytes, characters\n\ -@@ -362,7 +439,7 @@ - in_digits = false; - /* Starting a range. */ - if (dash_found) -- FATAL_ERROR (_("invalid byte or field list")); -+ FATAL_ERROR (_("invalid byte, character or field list")); - dash_found = true; - fieldstr++; - -@@ -387,14 +464,16 @@ - if (value == 0) - { - /* `n-'. From `initial' to end of line. */ -- eol_range_start = initial; -+ if (eol_range_start == 0 || -+ (eol_range_start != 0 && eol_range_start > initial)) -+ eol_range_start = initial; - field_found = true; - } - else - { - /* `m-n' or `-n' (1-n). */ - if (value < initial) -- FATAL_ERROR (_("invalid byte or field list")); -+ FATAL_ERROR (_("invalid byte, character or field list")); - - /* Is there already a range going to end of line? */ - if (eol_range_start != 0) -@@ -467,6 +546,9 @@ - if (operating_mode == byte_mode) - error (0, 0, - _("byte offset %s is too large"), quote (bad_num)); -+ else if (operating_mode == character_mode) -+ error (0, 0, -+ _("character offset %s is too large"), quote (bad_num)); - else - error (0, 0, - _("field number %s is too large"), quote (bad_num)); -@@ -477,7 +559,7 @@ - fieldstr++; - } - else -- FATAL_ERROR (_("invalid byte or field list")); -+ FATAL_ERROR (_("invalid byte, character or field list")); - } - - max_range_endpoint = 0; -@@ -570,6 +652,63 @@ - } - } - -+#if HAVE_MBRTOWC -+/* This function is in use for the following case. -+ -+ 1. Read from the stream STREAM, printing to standard output any selected -+ characters. -+ -+ 2. Read from stream STREAM, printing to standard output any selected bytes, -+ without splitting multibyte characters. */ -+ -+static void -+cut_characters_or_cut_bytes_no_split (FILE *stream) -+{ -+ int idx; /* number of bytes or characters in the line so far. */ -+ char buf[MB_LEN_MAX + BUFSIZ]; /* For spooling a read byte sequence. */ -+ char *bufpos; /* Next read position of BUF. */ -+ size_t buflen; /* The length of the byte sequence in buf. */ -+ wint_t wc; /* A gotten wide character. */ -+ size_t mblength; /* The byte size of a multibyte character which shows -+ as same character as WC. */ -+ mbstate_t state; /* State of the stream. */ -+ int convfail; /* 1, when conversion is failed. Otherwise 0. */ -+ -+ idx = 0; -+ buflen = 0; -+ bufpos = buf; -+ memset (&state, '\0', sizeof(mbstate_t)); -+ -+ while (1) -+ { -+ REFILL_BUFFER (buf, bufpos, buflen, stream); -+ -+ GET_NEXT_WC_FROM_BUFFER (wc, bufpos, buflen, mblength, state, convfail); -+ -+ if (wc == WEOF) -+ { -+ if (idx > 0) -+ putchar ('\n'); -+ break; -+ } -+ else if (wc == L'\n') -+ { -+ putchar ('\n'); -+ idx = 0; -+ } -+ else -+ { -+ idx += (operating_mode == byte_mode) ? mblength : 1; -+ if (print_kth (idx, NULL)) -+ fwrite (bufpos, mblength, sizeof(char), stdout); -+ } -+ -+ buflen -= mblength; -+ bufpos += mblength; -+ } -+} -+#endif -+ - /* Read from stream STREAM, printing to standard output any selected fields. */ - - static void -@@ -692,13 +831,192 @@ - } - } - -+#if HAVE_MBRTOWC -+static void -+cut_fields_mb (FILE *stream) -+{ -+ int c; -+ unsigned int field_idx; -+ int found_any_selected_field; -+ int buffer_first_field; -+ int empty_input; -+ char buf[MB_LEN_MAX + BUFSIZ]; /* For spooling a read byte sequence. */ -+ char *bufpos; /* Next read position of BUF. */ -+ size_t buflen; /* The length of the byte sequence in buf. */ -+ wint_t wc = 0; /* A gotten wide character. */ -+ size_t mblength; /* The byte size of a multibyte character which shows -+ as same character as WC. */ -+ mbstate_t state; /* State of the stream. */ -+ int convfail; /* 1, when conversion is failed. Otherwise 0. */ -+ -+ found_any_selected_field = 0; -+ field_idx = 1; -+ bufpos = buf; -+ buflen = 0; -+ memset (&state, '\0', sizeof(mbstate_t)); -+ -+ c = getc (stream); -+ empty_input = (c == EOF); -+ if (c != EOF) -+ ungetc (c, stream); -+ else -+ wc = WEOF; -+ -+ /* To support the semantics of the -s flag, we may have to buffer -+ all of the first field to determine whether it is `delimited.' -+ But that is unnecessary if all non-delimited lines must be printed -+ and the first field has been selected, or if non-delimited lines -+ must be suppressed and the first field has *not* been selected. -+ That is because a non-delimited line has exactly one field. */ -+ buffer_first_field = (suppress_non_delimited ^ !print_kth (1, NULL)); -+ -+ while (1) -+ { -+ if (field_idx == 1 && buffer_first_field) -+ { -+ int len = 0; -+ -+ while (1) -+ { -+ REFILL_BUFFER (buf, bufpos, buflen, stream); -+ -+ GET_NEXT_WC_FROM_BUFFER -+ (wc, bufpos, buflen, mblength, state, convfail); -+ -+ if (wc == WEOF) -+ break; -+ -+ field_1_buffer = xrealloc (field_1_buffer, len + mblength); -+ memcpy (field_1_buffer + len, bufpos, mblength); -+ len += mblength; -+ buflen -= mblength; -+ bufpos += mblength; -+ -+ if (!convfail && (wc == L'\n' || wc == wcdelim)) -+ break; -+ } -+ -+ if (wc == WEOF) -+ break; -+ -+ /* If the first field extends to the end of line (it is not -+ delimited) and we are printing all non-delimited lines, -+ print this one. */ -+ if (convfail || (!convfail && wc != wcdelim)) -+ { -+ if (suppress_non_delimited) -+ { -+ /* Empty. */ -+ } -+ else -+ { -+ fwrite (field_1_buffer, sizeof (char), len, stdout); -+ /* Make sure the output line is newline terminated. */ -+ if (convfail || (!convfail && wc != L'\n')) -+ putchar ('\n'); -+ } -+ continue; -+ } -+ -+ if (print_kth (1, NULL)) -+ { -+ /* Print the field, but not the trailing delimiter. */ -+ fwrite (field_1_buffer, sizeof (char), len - 1, stdout); -+ found_any_selected_field = 1; -+ } -+ ++field_idx; -+ } -+ -+ if (wc != WEOF) -+ { -+ if (print_kth (field_idx, NULL)) -+ { -+ if (found_any_selected_field) -+ { -+ fwrite (output_delimiter_string, sizeof (char), -+ output_delimiter_length, stdout); -+ } -+ found_any_selected_field = 1; -+ } -+ -+ while (1) -+ { -+ REFILL_BUFFER (buf, bufpos, buflen, stream); -+ -+ GET_NEXT_WC_FROM_BUFFER -+ (wc, bufpos, buflen, mblength, state, convfail); -+ -+ if (wc == WEOF) -+ break; -+ else if (!convfail && (wc == wcdelim || wc == L'\n')) -+ { -+ buflen -= mblength; -+ bufpos += mblength; -+ break; -+ } -+ -+ if (print_kth (field_idx, NULL)) -+ fwrite (bufpos, mblength, sizeof(char), stdout); -+ -+ buflen -= mblength; -+ bufpos += mblength; -+ } -+ } -+ -+ if ((!convfail || wc == L'\n') && buflen < 1) -+ wc = WEOF; -+ -+ if (!convfail && wc == wcdelim) -+ ++field_idx; -+ else if (wc == WEOF || (!convfail && wc == L'\n')) -+ { -+ if (found_any_selected_field -+ || (!empty_input && !(suppress_non_delimited && field_idx == 1))) -+ putchar ('\n'); -+ if (wc == WEOF) -+ break; -+ field_idx = 1; -+ found_any_selected_field = 0; -+ } -+ } -+} -+#endif -+ - static void - cut_stream (FILE *stream) - { -- if (operating_mode == byte_mode) -- cut_bytes (stream); -+#if HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1 && !force_singlebyte_mode) -+ { -+ switch (operating_mode) -+ { -+ case byte_mode: -+ if (byte_mode_character_aware) -+ cut_characters_or_cut_bytes_no_split (stream); -+ else -+ cut_bytes (stream); -+ break; -+ -+ case character_mode: -+ cut_characters_or_cut_bytes_no_split (stream); -+ break; -+ -+ case field_mode: -+ cut_fields_mb (stream); -+ break; -+ -+ default: -+ abort (); -+ } -+ } - else -- cut_fields (stream); -+#endif -+ { -+ if (operating_mode == field_mode) -+ cut_fields (stream); -+ else -+ cut_bytes (stream); -+ } - } - - /* Process file FILE to standard output. -@@ -748,6 +1066,8 @@ - bool ok; - bool delim_specified = false; - char *spec_list_string IF_LINT(= NULL); -+ char mbdelim[MB_LEN_MAX + 1]; -+ size_t delimlen = 0; - - initialize_main (&argc, &argv); - program_name = argv[0]; -@@ -770,7 +1090,6 @@ - switch (optc) - { - case 'b': -- case 'c': - /* Build the byte list. */ - if (operating_mode != undefined_mode) - FATAL_ERROR (_("only one type of list may be specified")); -@@ -778,6 +1097,14 @@ - spec_list_string = optarg; - break; - -+ case 'c': -+ /* Build the character list. */ -+ if (operating_mode != undefined_mode) -+ FATAL_ERROR (_("only one type of list may be specified")); -+ operating_mode = character_mode; -+ spec_list_string = optarg; -+ break; -+ - case 'f': - /* Build the field list. */ - if (operating_mode != undefined_mode) -@@ -789,10 +1116,35 @@ - case 'd': - /* New delimiter. */ - /* Interpret -d '' to mean `use the NUL byte as the delimiter.' */ -- if (optarg[0] != '\0' && optarg[1] != '\0') -- FATAL_ERROR (_("the delimiter must be a single character")); -- delim = optarg[0]; -- delim_specified = true; -+#if HAVE_MBRTOWC -+ { -+ if(MB_CUR_MAX > 1) -+ { -+ mbstate_t state; -+ -+ memset (&state, '\0', sizeof(mbstate_t)); -+ delimlen = mbrtowc (&wcdelim, optarg, strnlen(optarg, MB_LEN_MAX), &state); -+ -+ if (delimlen == (size_t)-1 || delimlen == (size_t)-2) -+ ++force_singlebyte_mode; -+ else -+ { -+ delimlen = (delimlen < 1) ? 1 : delimlen; -+ if (wcdelim != L'\0' && *(optarg + delimlen) != '\0') -+ FATAL_ERROR (_("the delimiter must be a single character")); -+ memcpy (mbdelim, optarg, delimlen); -+ } -+ } -+ -+ if (MB_CUR_MAX <= 1 || force_singlebyte_mode) -+#endif -+ { -+ if (optarg[0] != '\0' && optarg[1] != '\0') -+ FATAL_ERROR (_("the delimiter must be a single character")); -+ delim = (unsigned char) optarg[0]; -+ } -+ delim_specified = true; -+ } - break; - - case OUTPUT_DELIMITER_OPTION: -@@ -805,6 +1157,7 @@ - break; - - case 'n': -+ byte_mode_character_aware = 1; - break; - - case 's': -@@ -827,7 +1180,7 @@ - if (operating_mode == undefined_mode) - FATAL_ERROR (_("you must specify a list of bytes, characters, or fields")); - -- if (delim != '\0' && operating_mode != field_mode) -+ if (delim_specified && operating_mode != field_mode) - FATAL_ERROR (_("an input delimiter may be specified only\ - when operating on fields")); - -@@ -854,15 +1207,34 @@ - } - - if (!delim_specified) -- delim = '\t'; -+ { -+ delim = '\t'; -+#ifdef HAVE_MBRTOWC -+ wcdelim = L'\t'; -+ mbdelim[0] = '\t'; -+ mbdelim[1] = '\0'; -+ delimlen = 1; -+#endif -+ } - - if (output_delimiter_string == NULL) - { -- static char dummy[2]; -- dummy[0] = delim; -- dummy[1] = '\0'; -- output_delimiter_string = dummy; -- output_delimiter_length = 1; -+#ifdef HAVE_MBRTOWC -+ if (MB_CUR_MAX > 1 && !force_singlebyte_mode) -+ { -+ output_delimiter_string = xstrdup(mbdelim); -+ output_delimiter_length = delimlen; -+ } -+ -+ if (MB_CUR_MAX <= 1 || force_singlebyte_mode) -+#endif -+ { -+ static char dummy[2]; -+ dummy[0] = delim; -+ dummy[1] = '\0'; -+ output_delimiter_string = dummy; -+ output_delimiter_length = 1; -+ } - } - - if (optind == argc) diff --git a/meta/recipes-core/coreutils/coreutils-6.9/coreutils-ls-x.patch b/meta/recipes-core/coreutils/coreutils-6.9/coreutils-ls-x.patch deleted file mode 100644 index aba8742f6a..0000000000 --- a/meta/recipes-core/coreutils/coreutils-6.9/coreutils-ls-x.patch +++ /dev/null @@ -1,117 +0,0 @@ -Upstream-Status: Inappropriate [legacy version] - -This patch was imported from the Fedora Core 8 coreutils-6.9-9 package. - -The package is stated as being Licensed as GPLv2+. - -Signed-off-by: Mark Hatle <mark.hatle@windriver.com> - ---- coreutils-6.9/src/ls.c.ls-x 2007-06-13 14:27:36.000000000 +0100 -+++ coreutils-6.9/src/ls.c 2007-06-13 14:28:42.000000000 +0100 -@@ -4151,16 +4151,16 @@ - size_t pos = 0; - size_t cols = calculate_columns (false); - struct column_info const *line_fmt = &column_info[cols - 1]; -- size_t name_length = length_of_file_name_and_frills (cwd_file); -+ struct fileinfo const *f = sorted_file[0]; -+ size_t name_length = length_of_file_name_and_frills (f); - size_t max_name_length = line_fmt->col_arr[0]; - - /* Print first entry. */ -- print_file_name_and_frills (cwd_file); -+ print_file_name_and_frills (f); - - /* Now the rest. */ - for (filesno = 1; filesno < cwd_n_used; ++filesno) - { -- struct fileinfo const *f; - size_t col = filesno % cols; - - if (col == 0) ---- coreutils-6.9/tests/ls/Makefile.am.ls-x 2007-03-18 21:36:43.000000000 +0000 -+++ coreutils-6.9/tests/ls/Makefile.am 2007-06-13 14:28:42.000000000 +0100 -@@ -24,7 +24,7 @@ - stat-dtype \ - inode dangle file-type recursive dired infloop \ - rt-1 time-1 symlink-slash follow-slink no-arg m-option \ -- stat-vs-dirent -+ stat-vs-dirent x-option - - EXTRA_DIST = $(TESTS) - TESTS_ENVIRONMENT = \ ---- /dev/null 2007-06-13 08:43:51.993263382 +0100 -+++ coreutils-6.9/tests/ls/x-option 2007-06-13 14:28:42.000000000 +0100 -@@ -0,0 +1,59 @@ -+#!/bin/sh -+# Exercise the -x option. -+ -+# Copyright (C) 2007 Free Software Foundation, Inc. -+ -+# This program is free software; you can redistribute it and/or modify -+# it under the terms of the GNU General Public License as published by -+# the Free Software Foundation; either version 2 of the License, or -+# (at your option) any later version. -+ -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+ -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -+# 02110-1301, USA. -+ -+if test "$VERBOSE" = yes; then -+ set -x -+ ls --version -+fi -+ -+. $srcdir/../envvar-check -+. $srcdir/../lang-default -+ -+pwd=`pwd` -+t0=`echo "$0"|sed 's,.*/,,'`.tmp; tmp=$t0/$$ -+trap 'status=$?; cd "$pwd" && chmod -R u+rwx $t0 && rm -rf $t0 && exit $status' 0 -+trap '(exit $?); exit $?' 1 2 13 15 -+ -+framework_failure=0 -+mkdir -p $tmp || framework_failure=1 -+cd $tmp || framework_failure=1 -+mkdir subdir || framework_failure=1 -+touch subdir/b || framework_failure=1 -+touch subdir/a || framework_failure=1 -+ -+if test $framework_failure = 1; then -+ echo "$0: failure in testing framework" 1>&2 -+ (exit 1); exit 1 -+fi -+ -+fail=0 -+ -+# Coreutils 6.8 and 6.9 would output this in the wrong order. -+ls -x subdir > out || fail=1 -+ls -rx subdir >> out || fail=1 -+cat <<\EOF > exp || fail=1 -+a b -+b a -+EOF -+ -+cmp out exp || fail=1 -+test $fail = 1 && diff out exp 2> /dev/null -+ -+(exit $fail); exit $fail ---- coreutils-6.9/NEWS.ls-x 2007-03-22 21:19:45.000000000 +0000 -+++ coreutils-6.9/NEWS 2007-06-13 14:28:42.000000000 +0100 -@@ -13,6 +13,11 @@ - Using pr -m -s (i.e. merging files, with TAB as the output separator) - no longer inserts extraneous spaces between output columns. - -+** Bug fixes -+ -+ ls -x DIR would sometimes output the wrong string in place of the -+ first entry. [introduced in coreutils-6.8] -+ - - * Noteworthy changes in release 6.8 (2007-02-24) [not-unstable] - diff --git a/meta/recipes-core/coreutils/coreutils-6.9/coreutils-overflow.patch b/meta/recipes-core/coreutils/coreutils-6.9/coreutils-overflow.patch deleted file mode 100644 index 58074c09a5..0000000000 --- a/meta/recipes-core/coreutils/coreutils-6.9/coreutils-overflow.patch +++ /dev/null @@ -1,19 +0,0 @@ -Upstream-Status: Inappropriate [legacy version] - -This patch was imported from the Fedora Core 8 coreutils-6.9-9 package. - -The package is stated as being Licensed as GPLv2+. - -Signed-off-by: Mark Hatle <mark.hatle@windriver.com> - ---- coreutils-5.2.1/src/who.c.overflow 2005-05-25 09:59:06.000000000 +0100 -+++ coreutils-5.2.1/src/who.c 2005-05-25 10:00:31.000000000 +0100 -@@ -75,7 +75,7 @@ - # define NEW_TIME 0 - #endif - --#define IDLESTR_LEN 6 -+#define IDLESTR_LEN 10 - - #if HAVE_STRUCT_XTMP_UT_PID - # define PIDSTR_DECL_AND_INIT(Var, Utmp_ent) \ diff --git a/meta/recipes-core/coreutils/coreutils-6.9/coreutils_fix_for_automake-1.12.patch b/meta/recipes-core/coreutils/coreutils-6.9/coreutils_fix_for_automake-1.12.patch deleted file mode 100644 index 64e5f12baa..0000000000 --- a/meta/recipes-core/coreutils/coreutils-6.9/coreutils_fix_for_automake-1.12.patch +++ /dev/null @@ -1,32 +0,0 @@ -Upstream-Status: Pending - -automake 1.12 has depricated automatic de-ANSI-fication support - -this patch avoids these kinds of errors: - -| configure.ac:40: error: automatic de-ANSI-fication support has been removed -| /srv/home/nitin/builds/build-gcc47/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.12/protos.m4:12: AM_C_PROTOTYPES is expanded from... -| /srv/home/nitin/builds/build-gcc47/tmp/work/x86_64-linux/coreutils-native-6.9-r2/coreutils-6.9/m4/jm-macros.m4:138: gl_CHECK_ALL_TYPES is expanded from... -| /srv/home/nitin/builds/build-gcc47/tmp/work/x86_64-linux/coreutils-native-6.9-r2/coreutils-6.9/m4/jm-macros.m4:24: coreutils_MACROS is expanded from... -| configure.ac:40: the top level -| autom4te: m4 failed with exit status: 1 - -Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> -2012/05/04 - -Index: coreutils-6.9/m4/jm-macros.m4 -=================================================================== ---- coreutils-6.9.orig/m4/jm-macros.m4 -+++ coreutils-6.9/m4/jm-macros.m4 -@@ -142,11 +142,6 @@ AC_DEFUN([gl_CHECK_ALL_TYPES], - dnl whether functions and headers are available, whether they work, etc. - AC_REQUIRE([AC_SYS_LARGEFILE]) - -- dnl This test must precede tests of compiler characteristics like -- dnl that for the inline keyword, since it may change the degree to -- dnl which the compiler supports such features. -- AC_REQUIRE([AM_C_PROTOTYPES]) -- - dnl Checks for typedefs, structures, and compiler characteristics. - AC_REQUIRE([AC_C_BIGENDIAN]) - AC_REQUIRE([AC_C_VOLATILE]) diff --git a/meta/recipes-core/coreutils/coreutils-6.9/fix_for_manpage_building.patch b/meta/recipes-core/coreutils/coreutils-6.9/fix_for_manpage_building.patch deleted file mode 100644 index e0d600a390..0000000000 --- a/meta/recipes-core/coreutils/coreutils-6.9/fix_for_manpage_building.patch +++ /dev/null @@ -1,85 +0,0 @@ -Upstream-Status: Inappropriate [legacy version] - -Use native coreutils binaries to build manpages in cross environment. -This avoids man page build issues like this: - -| Making all in man -| make[1]: Entering directory `/build_disk/poky_build/build1/tmp/work/i586-poky-linux/coreutils-6.9-r0/coreutils-6.9/man' -| Updating man page cut.1 -| Updating man page dir.1 -| Updating man page expand.1 -| Updating man page fold.1 -| Updating man page install.1 -| Updating man page join.1 -| Updating man page pr.1 -| Updating man page ls.1 -| Updating man page sort.1 -| Updating man page unexpand.1 -| Updating man page uniq.1 -| Updating man page who.1 -| Updating man page vdir.1 -| help2man: can't get `--help' info from dir.td/dir -| help2man: can't get `--help' info from cut.td/cut -| make[1]: *** [dir.1] Error 126 -| make[1]: *** Waiting for unfinished jobs.... -| help2man: can't get `--help' info from fold.td/fold -| help2man: can't get `--help' info from install.td/install -| help2man: can't get `--help' info from expand.td/expand -| help2man: can't get `--help' info from join.td/join -| make[1]: *** [cut.1] Error 126 -| make[1]: *** [fold.1] Error 126 -| make[1]: *** [install.1] Error 126 -| help2man: can't get `--help' info from sort.td/sort -| make[1]: *** [expand.1] Error 126 -| help2man: can't get `--help' info from pr.td/pr -| make[1]: *** [join.1] Error 126 -| help2man: can't get `--help' info from ls.td/ls -| help2man: can't get `--help' info from unexpand.td/unexpand -| help2man: can't get `--help' info from uniq.td/uniq -| help2man: can't get `--help' info from who.td/who -| make[1]: *** [sort.1] Error 126 -| make[1]: *** [pr.1] Error 126 -| help2man: can't get `--help' info from vdir.td/vdir -| make[1]: *** [ls.1] Error 126 -| make[1]: *** [uniq.1] Error 126 -| make[1]: *** [unexpand.1] Error 126 -| make[1]: *** [who.1] Error 126 -| make[1]: *** [vdir.1] Error 126 -| make[1]: Leaving directory `/build_disk/poky_build/build1/tmp/work/i586-poky-linux/coreutils-6.9-r0/coreutils-6.9/man' -| make: *** [all-recursive] Error 1 -| FATAL: oe_runmake failed -| ERROR: Function 'do_compile' failed (see /build_disk/poky_build/build1/tmp/work/i586-poky-linux/coreutils-6.9-r0/temp/log.do_compile.12780 for further information) -NOTE: package coreutils-6.9-r0: task do_compile: Failed -ERROR: Task 8 (/home/nitin/prj/poky.git/meta/recipes-core/coreutils/coreutils_6.9.bb, do_compile) failed with exit code '1' - - -This patch is made for gplv2 coreutils the recipe -Nitin A Kamble <nitin.a.kamble@intel.com> -2011/03/17 - -Index: man/Makefile.am -=================================================================== ---- a/man.orig/Makefile.am -+++ b/man/Makefile.am -@@ -167,7 +167,7 @@ mapped_name = `echo $*|sed 's/install/gi - $(PERL) -- $(srcdir)/help2man \ - --source='$(PACKAGE_STRING)' \ - --include=$(srcdir)/$*.x \ -- --output=$t/$@ $t/$*; \ -+ --output=$t/$@ $*; \ - } \ - && sed 's|$*\.td/||g' $t/$@ > $@ \ - && chmod a-w $@ \ -Index: man/Makefile.in -=================================================================== ---- a/man.orig/Makefile.in -+++ b/man/Makefile.in -@@ -865,7 +865,7 @@ yes.1: $(common_dep) $(srcdir)/yes.x . - $(PERL) -- $(srcdir)/help2man \ - --source='$(PACKAGE_STRING)' \ - --include=$(srcdir)/$*.x \ -- --output=$t/$@ $t/$*; \ -+ --output=$t/$@ $*; \ - } \ - && sed 's|$*\.td/||g' $t/$@ > $@ \ - && chmod a-w $@ \ diff --git a/meta/recipes-core/coreutils/coreutils-6.9/futimens.patch b/meta/recipes-core/coreutils/coreutils-6.9/futimens.patch deleted file mode 100644 index 508810623d..0000000000 --- a/meta/recipes-core/coreutils/coreutils-6.9/futimens.patch +++ /dev/null @@ -1,63 +0,0 @@ -Upstream-Status: Inappropriate [legacy version] - -# coreutils uses gnulib which conflicts with newer libc header on futimens -# this patch simply renames coreutils futimes to avoid confliction -# -# Signed-off-by: Kevin Tian <kevin.tian@intel.com>, 2010-08-18 -# (this patch is licensed under GPLv2) - -diff --git a/lib/utimens.c b/lib/utimens.c -index 71bc510..ae870b8 100644 ---- a/lib/utimens.c -+++ b/lib/utimens.c -@@ -75,7 +75,7 @@ struct utimbuf - Return 0 on success, -1 (setting errno) on failure. */ - - int --futimens (int fd ATTRIBUTE_UNUSED, -+futimens_coreutils (int fd ATTRIBUTE_UNUSED, - char const *file, struct timespec const timespec[2]) - { - /* Some Linux-based NFS clients are buggy, and mishandle time stamps -@@ -185,5 +185,5 @@ futimens (int fd ATTRIBUTE_UNUSED, - int - utimens (char const *file, struct timespec const timespec[2]) - { -- return futimens (-1, file, timespec); -+ return futimens_coreutils (-1, file, timespec); - } -diff --git a/lib/utimens.h b/lib/utimens.h -index 0097aaa..13fc45a 100644 ---- a/lib/utimens.h -+++ b/lib/utimens.h -@@ -1,3 +1,3 @@ - #include <time.h> --int futimens (int, char const *, struct timespec const [2]); -+int futimens_coreutils (int, char const *, struct timespec const [2]); - int utimens (char const *, struct timespec const [2]); -diff --git a/src/copy.c b/src/copy.c -index 4bdb75c..04634f1 100644 ---- a/src/copy.c -+++ b/src/copy.c -@@ -518,7 +518,7 @@ copy_reg (char const *src_name, char const *dst_name, - timespec[0] = get_stat_atime (src_sb); - timespec[1] = get_stat_mtime (src_sb); - -- if (futimens (dest_desc, dst_name, timespec) != 0) -+ if (futimens_coreutils (dest_desc, dst_name, timespec) != 0) - { - error (0, errno, _("preserving times for %s"), quote (dst_name)); - if (x->require_preserve) -diff --git a/src/touch.c b/src/touch.c -index a79c26d..6ef317d 100644 ---- a/src/touch.c -+++ b/src/touch.c -@@ -182,7 +182,7 @@ touch (const char *file) - t = timespec; - } - -- ok = (futimens (fd, (fd == STDOUT_FILENO ? NULL : file), t) == 0); -+ ok = (futimens_coreutils (fd, (fd == STDOUT_FILENO ? NULL : file), t) == 0); - - if (fd == STDIN_FILENO) - { diff --git a/meta/recipes-core/coreutils/coreutils-6.9/gnulib_m4.patch b/meta/recipes-core/coreutils/coreutils-6.9/gnulib_m4.patch deleted file mode 100644 index 8a8ffa7264..0000000000 --- a/meta/recipes-core/coreutils/coreutils-6.9/gnulib_m4.patch +++ /dev/null @@ -1,21 +0,0 @@ -Upstream-Status: Inappropriate [legacy version] - -# remove the line to cause recursive inclusion error from autoreconf, sicne -# newer autoconf has included this definition. Simply rename it here. -# -# Signed-off-by: Kevin Tian <kevin.tian@intel.com>, 2010-08-18 -# (this patch is licensed under GPLv2) - -diff --git a/extensions.m4 b/extensions.m4 -index 143a9e5..f6558f1 100644 ---- a/m4/extensions.m4 -+++ b/m4/extensions.m4 -@@ -16,7 +16,7 @@ - # ------------------------ - # Enable extensions on systems that normally disable them, - # typically due to standards-conformance issues. --AC_DEFUN([AC_USE_SYSTEM_EXTENSIONS], -+AC_DEFUN([AC_USE_SYSTEM_EXTENSIONS_DUMMY], - [ - AC_BEFORE([$0], [AC_COMPILE_IFELSE]) - AC_BEFORE([$0], [AC_RUN_IFELSE]) diff --git a/meta/recipes-core/coreutils/coreutils-6.9/loadavg.patch b/meta/recipes-core/coreutils/coreutils-6.9/loadavg.patch deleted file mode 100644 index c72efd4d30..0000000000 --- a/meta/recipes-core/coreutils/coreutils-6.9/loadavg.patch +++ /dev/null @@ -1,18 +0,0 @@ -Remove hardcoded paths so OE's configure QA does not detect it and fail the builds -For cross compilation is less interesting to look into host paths for target libraries anyway - -Upstream-Status: Inappropriate [OE Specific] -Signed-off-by: Khem Raj <raj.khem@gmail.com> - -Index: coreutils-6.9/m4/getloadavg.m4 -=================================================================== ---- coreutils-6.9.orig/m4/getloadavg.m4 -+++ coreutils-6.9/m4/getloadavg.m4 -@@ -49,7 +49,6 @@ if test $gl_have_func = no; then - # There is a commonly available library for RS/6000 AIX. - # Since it is not a standard part of AIX, it might be installed locally. - gl_getloadavg_LIBS=$LIBS -- LIBS="-L/usr/local/lib $LIBS" - AC_CHECK_LIB(getloadavg, getloadavg, - [LIBS="-lgetloadavg $LIBS"], [LIBS=$gl_getloadavg_LIBS]) - fi diff --git a/meta/recipes-core/coreutils/coreutils-6.9/man-touch.patch b/meta/recipes-core/coreutils/coreutils-6.9/man-touch.patch deleted file mode 100644 index 59a4fe0053..0000000000 --- a/meta/recipes-core/coreutils/coreutils-6.9/man-touch.patch +++ /dev/null @@ -1,24 +0,0 @@ -Upstream-Status: Inappropriate [legacy version] - -# man page for 'touch' is generated differently from others. All other utilities -# are provided static man source files, while for 'touch' it requires help2man -# to invoke "touch --help" and then convert the output into the manual. Since touch -# is with target format which can't be invoked on build system, disable building -# 'touch' man page here. -# -# Signed-off-by: Kevin Tian <kevin.tian@intel.com>, 2010-08-18 -# (this patch is licensed under GPLv2) - -diff --git a/man/Makefile.am b/man/Makefile.am -index 32df9d1..37b09e3 100644 ---- a/man/Makefile.am -+++ b/man/Makefile.am -@@ -27,7 +27,7 @@ dist_man_MANS = \ - paste.1 pathchk.1 pr.1 printenv.1 printf.1 ptx.1 pwd.1 readlink.1 \ - rm.1 rmdir.1 seq.1 sha1sum.1 sha224sum.1 sha256sum.1 sha384sum.1 sha512sum.1 \ - shred.1 shuf.1 sleep.1 sort.1 split.1 stat.1 \ -- su.1 sum.1 sync.1 tac.1 tail.1 tee.1 test.1 touch.1 tr.1 true.1 tsort.1 \ -+ su.1 sum.1 sync.1 tac.1 tail.1 tee.1 test.1 tr.1 true.1 tsort.1 \ - tty.1 unexpand.1 uniq.1 unlink.1 vdir.1 wc.1 \ - whoami.1 yes.1 $(MAN) - optional_mans = \ diff --git a/meta/recipes-core/coreutils/coreutils_6.9.bb b/meta/recipes-core/coreutils/coreutils_6.9.bb deleted file mode 100644 index 821aafc6e0..0000000000 --- a/meta/recipes-core/coreutils/coreutils_6.9.bb +++ /dev/null @@ -1,107 +0,0 @@ -SUMMARY = "The basic file, shell and text manipulation utilities" -DESCRIPTION = "The GNU Core Utilities provide the basic file, shell and text \ -manipulation utilities. These are the core utilities which are expected to exist on \ -every system." - -HOMEPAGE = "http://www.gnu.org/software/coreutils/" -BUGTRACKER = "http://debbugs.gnu.org/coreutils" -LICENSE = "GPLv2+" -LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe \ - file://src/ls.c;beginline=4;endline=16;md5=15ed60f67b1db5fedd5dbc37cf8a9543" -PR = "r5" -DEPENDS = "virtual/libiconv" - -inherit autotools gettext texinfo - -SRC_URI = "${GNU_MIRROR}/coreutils/${BP}.tar.bz2 \ - file://gnulib_m4.patch \ - file://futimens.patch \ - file://coreutils-ls-x.patch \ - file://coreutils-6.9-cp-i-u.patch \ - file://coreutils-i18n.patch \ - file://coreutils-overflow.patch \ - file://coreutils-fix-install.patch \ - file://man-touch.patch \ - file://coreutils_fix_for_automake-1.12.patch \ - file://coreutils-fix-texinfo.patch \ - file://fix_for_manpage_building.patch \ - file://loadavg.patch \ - " - -SRC_URI[md5sum] = "c9607d8495f16e98906e7ed2d9751a06" -SRC_URI[sha256sum] = "89c2895ad157de50e53298b22d91db116ee4e1dd3fdf4019260254e2e31497b0" - -EXTRA_OECONF += "ac_cv_func_getgroups_works=yes \ - ac_cv_func_strcoll_works=yes" - -# acl is not a default feature -# -PACKAGECONFIG ??= "${@bb.utils.filter('DISTRO_FEATURES', 'acl', d)}" - -# with, without, depends, rdepends -# -PACKAGECONFIG[acl] = "ac_cv_header_sys_acl_h=yes ac_cv_header_acl_libacl_h=yes ac_cv_search_acl_get_file=-lacl,ac_cv_header_sys_acl_h=no ac_cv_header_acl_libacl_h=no ac_cv_search_acl_get_file=,acl," - - -# [ gets a special treatment and is not included in this -bindir_progs = "base64 basename cksum comm csplit cut dir dircolors dirname du \ - env expand expr factor fmt fold groups head hostid id install \ - join link logname md5sum mkfifo nice nl nohup od paste pathchk \ - pinky pr printenv printf ptx readlink seq sha1sum sha224sum sha256sum \ - sha384sum sha512sum shred shuf sort split sum tac tail tee test \ - tr tsort tty unexpand uniq unlink users vdir wc who whoami yes uptime" - -# hostname gets a special treatment and is not included in this -base_bindir_progs = "cat chgrp chmod chown cp date dd echo false kill ln ls mkdir \ - mknod mv pwd rm rmdir sleep stty sync touch true uname hostname stat" - -sbindir_progs= "chroot" - -# Let aclocal use the relative path for the m4 file rather than the -# absolute since coreutils has a lot of m4 files, otherwise there might -# be an "Argument list too long" error when it is built in a long/deep -# directory. -acpaths = "-I ./m4" - -do_install() { - autotools_do_install - - install -d ${D}${base_bindir} - [ "${bindir}" != "${base_bindir}" ] && for i in ${base_bindir_progs}; do mv ${D}${bindir}/$i ${D}${base_bindir}/$i; done - - install -d ${D}${sbindir} - [ "${bindir}" != "${sbindir}" ] && for i in ${sbindir_progs}; do mv ${D}${bindir}/$i ${D}${sbindir}/$i; done - - # [ requires special handling because [.coreutils will cause the sed stuff - # in update-alternatives to fail, therefore use lbracket - the name used - # for the actual source file. - mv ${D}${bindir}/[ ${D}${bindir}/lbracket.${BPN} - - # Newer versions of coreutils do not include su, to mimic this behavior - # we simply remove it. - rm -f ${D}${bindir}/su -} - -inherit update-alternatives - -ALTERNATIVE_PRIORITY = "100" - -ALTERNATIVE_${PN} = "lbracket ${bindir_progs} ${base_bindir_progs} ${sbindir_progs}" - -ALTERNATIVE_${PN}-doc = "su.1 hostname.1" -ALTERNATIVE_LINK_NAME[su.1] = "${mandir}/man1/su.1" -ALTERNATIVE_LINK_NAME[hostname.1] = "${mandir}/man1/hostname.1" - -ALTERNATIVE_PRIORITY[uptime] = "10" -ALTERNATIVE_PRIORITY[hostname] = "10" - -ALTERNATIVE_LINK_NAME[lbracket] = "${bindir}/[" -ALTERNATIVE_TARGET[lbracket] = "${bindir}/lbracket.${BPN}" - -python __anonymous() { - for prog in d.getVar('base_bindir_progs').split(): - d.setVarFlag('ALTERNATIVE_LINK_NAME', prog, '%s/%s' % (d.getVar('base_bindir'), prog)) - - for prog in d.getVar('sbindir_progs').split(): - d.setVarFlag('ALTERNATIVE_LINK_NAME', prog, '%s/%s' % (d.getVar('sbindir'), prog)) -} |