diff options
Diffstat (limited to 'meta/recipes-connectivity/wpa-supplicant/wpa-supplicant')
13 files changed, 133 insertions, 990 deletions
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-AP-WMM-Fix-integer-underflow-in-WMM-Action-frame-par.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-AP-WMM-Fix-integer-underflow-in-WMM-Action-frame-par.patch deleted file mode 100644 index 882674fe5b..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-AP-WMM-Fix-integer-underflow-in-WMM-Action-frame-par.patch +++ /dev/null @@ -1,45 +0,0 @@ -Upstream-Status: Backport - -Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com> - -From ef566a4d4f74022e1fdb0a2addfe81e6de9f4aae Mon Sep 17 00:00:00 2001 -From: Jouni Malinen <j@w1.fi> -Date: Wed, 29 Apr 2015 02:21:53 +0300 -Subject: [PATCH] AP WMM: Fix integer underflow in WMM Action frame parser - -The length of the WMM Action frame was not properly validated and the -length of the information elements (int left) could end up being -negative. This would result in reading significantly past the stack -buffer while parsing the IEs in ieee802_11_parse_elems() and while doing -so, resulting in segmentation fault. - -This can result in an invalid frame being used for a denial of service -attack (hostapd process killed) against an AP with a driver that uses -hostapd for management frame processing (e.g., all mac80211-based -drivers). - -Thanks to Kostya Kortchinsky of Google security team for discovering and -reporting this issue. - -Signed-off-by: Jouni Malinen <j@w1.fi> ---- - src/ap/wmm.c | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/src/ap/wmm.c b/src/ap/wmm.c -index 6d4177c..314e244 100644 ---- a/src/ap/wmm.c -+++ b/src/ap/wmm.c -@@ -274,6 +274,9 @@ void hostapd_wmm_action(struct hostapd_data *hapd, - return; - } - -+ if (left < 0) -+ return; /* not a valid WMM Action frame */ -+ - /* extract the tspec info element */ - if (ieee802_11_parse_elems(pos, left, &elems, 1) == ParseFailed) { - hostapd_logger(hapd, mgmt->sa, HOSTAPD_MODULE_IEEE80211, --- -1.9.1 - diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-EAP-pwd-peer-Fix-payload-length-validation-for-Commi.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-EAP-pwd-peer-Fix-payload-length-validation-for-Commi.patch deleted file mode 100644 index a2bafc8c46..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-EAP-pwd-peer-Fix-payload-length-validation-for-Commi.patch +++ /dev/null @@ -1,77 +0,0 @@ -Upstream-Status: Backport - -Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com> - -From dd2f043c9c43d156494e33d7ce22db96e6ef42c7 Mon Sep 17 00:00:00 2001 -From: Jouni Malinen <j@w1.fi> -Date: Fri, 1 May 2015 16:37:45 +0300 -Subject: [PATCH 1/5] EAP-pwd peer: Fix payload length validation for Commit - and Confirm - -The length of the received Commit and Confirm message payloads was not -checked before reading them. This could result in a buffer read -overflow when processing an invalid message. - -Fix this by verifying that the payload is of expected length before -processing it. In addition, enforce correct state transition sequence to -make sure there is no unexpected behavior if receiving a Commit/Confirm -message before the previous exchanges have been completed. - -Thanks to Kostya Kortchinsky of Google security team for discovering and -reporting this issue. - -Signed-off-by: Jouni Malinen <j@w1.fi> ---- - src/eap_peer/eap_pwd.c | 29 +++++++++++++++++++++++++++++ - 1 file changed, 29 insertions(+) - -diff --git a/src/eap_peer/eap_pwd.c b/src/eap_peer/eap_pwd.c -index f2b0926..a629437 100644 ---- a/src/eap_peer/eap_pwd.c -+++ b/src/eap_peer/eap_pwd.c -@@ -355,6 +355,23 @@ eap_pwd_perform_commit_exchange(struct eap_sm *sm, struct eap_pwd_data *data, - BIGNUM *mask = NULL, *x = NULL, *y = NULL, *cofactor = NULL; - u16 offset; - u8 *ptr, *scalar = NULL, *element = NULL; -+ size_t prime_len, order_len; -+ -+ if (data->state != PWD_Commit_Req) { -+ ret->ignore = TRUE; -+ goto fin; -+ } -+ -+ prime_len = BN_num_bytes(data->grp->prime); -+ order_len = BN_num_bytes(data->grp->order); -+ -+ if (payload_len != 2 * prime_len + order_len) { -+ wpa_printf(MSG_INFO, -+ "EAP-pwd: Unexpected Commit payload length %u (expected %u)", -+ (unsigned int) payload_len, -+ (unsigned int) (2 * prime_len + order_len)); -+ goto fin; -+ } - - if (((data->private_value = BN_new()) == NULL) || - ((data->my_element = EC_POINT_new(data->grp->group)) == NULL) || -@@ -554,6 +571,18 @@ eap_pwd_perform_confirm_exchange(struct eap_sm *sm, struct eap_pwd_data *data, - u8 conf[SHA256_MAC_LEN], *cruft = NULL, *ptr; - int offset; - -+ if (data->state != PWD_Confirm_Req) { -+ ret->ignore = TRUE; -+ goto fin; -+ } -+ -+ if (payload_len != SHA256_MAC_LEN) { -+ wpa_printf(MSG_INFO, -+ "EAP-pwd: Unexpected Confirm payload length %u (expected %u)", -+ (unsigned int) payload_len, SHA256_MAC_LEN); -+ goto fin; -+ } -+ - /* - * first build up the ciphersuite which is group | random_function | - * prf --- -1.9.1 - diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-Install-wpa_passphrase-when-not-disabled.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-Install-wpa_passphrase-when-not-disabled.patch new file mode 100644 index 0000000000..c04c608bde --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-Install-wpa_passphrase-when-not-disabled.patch @@ -0,0 +1,33 @@ +From 57b12a1e43605f71239a21488cb9b541f0751dda Mon Sep 17 00:00:00 2001 +From: Alex Kiernan <alexk@zuma.ai> +Date: Thu, 21 Apr 2022 10:15:29 +0100 +Subject: [PATCH] Install wpa_passphrase when not disabled + +As part of fixing CONFIG_NO_WPA_PASSPHRASE, whilst wpa_passphrase gets +built, its not installed during `make install`. + +Fixes: cb41c214b78d ("build: Re-enable options for libwpa_client.so and wpa_passphrase") +Signed-off-by: Alex Kiernan <alexk@zuma.ai> +Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> +Upstream-Status: Submitted [http://lists.infradead.org/pipermail/hostap/2022-April/040448.html] +--- + wpa_supplicant/Makefile | 3 +++ + 1 file changed, 3 insertions(+) + +diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile +index 0bab313f2355..12787c0c7d0f 100644 +--- a/wpa_supplicant/Makefile ++++ b/wpa_supplicant/Makefile +@@ -73,6 +73,9 @@ $(DESTDIR)$(BINDIR)/%: % + + install: $(addprefix $(DESTDIR)$(BINDIR)/,$(BINALL)) + $(MAKE) -C ../src install ++ifndef CONFIG_NO_WPA_PASSPHRASE ++ install -D wpa_passphrase $(DESTDIR)/$(BINDIR)/wpa_passphrase ++endif + ifdef CONFIG_BUILD_WPA_CLIENT_SO + install -m 0644 -D libwpa_client.so $(DESTDIR)/$(LIBDIR)/libwpa_client.so + install -m 0644 -D ../src/common/wpa_ctrl.h $(DESTDIR)/$(INCDIR)/wpa_ctrl.h +-- +2.35.1 + diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch deleted file mode 100644 index e108a931c0..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 9ed4eee345f85e3025c33c6e20aa25696e341ccd Mon Sep 17 00:00:00 2001 -From: Jouni Malinen <jouni@qca.qualcomm.com> -Date: Tue, 7 Apr 2015 11:32:11 +0300 -Subject: [PATCH] P2P: Validate SSID element length before copying it - (CVE-2015-1863) - -This fixes a possible memcpy overflow for P2P dev->oper_ssid in -p2p_add_device(). The length provided by the peer device (0..255 bytes) -was used without proper bounds checking and that could have resulted in -arbitrary data of up to 223 bytes being written beyond the end of the -dev->oper_ssid[] array (of which about 150 bytes would be beyond the -heap allocation) when processing a corrupted management frame for P2P -peer discovery purposes. - -This could result in corrupted state in heap, unexpected program -behavior due to corrupted P2P peer device information, denial of service -due to process crash, exposure of memory contents during GO Negotiation, -and potentially arbitrary code execution. - -Thanks to Google security team for reporting this issue and smart -hardware research group of Alibaba security team for discovering it. - -Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> - -Upstream-Status: Backport - -Signed-off-by: Yue Tao <yue.tao@windriver.com> - ---- - src/p2p/p2p.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/src/p2p/p2p.c b/src/p2p/p2p.c -index f584fae..a45fe73 100644 ---- a/src/p2p/p2p.c -+++ b/src/p2p/p2p.c -@@ -778,6 +778,7 @@ int p2p_add_device(struct p2p_data *p2p, const u8 *addr, int freq, - if (os_memcmp(addr, p2p_dev_addr, ETH_ALEN) != 0) - os_memcpy(dev->interface_addr, addr, ETH_ALEN); - if (msg.ssid && -+ msg.ssid[1] <= sizeof(dev->oper_ssid) && - (msg.ssid[1] != P2P_WILDCARD_SSID_LEN || - os_memcmp(msg.ssid + 2, P2P_WILDCARD_SSID, P2P_WILDCARD_SSID_LEN) - != 0)) { --- -1.7.9.5 - diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-WPS-Fix-HTTP-chunked-transfer-encoding-parser.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-WPS-Fix-HTTP-chunked-transfer-encoding-parser.patch deleted file mode 100644 index 2568ea1124..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-WPS-Fix-HTTP-chunked-transfer-encoding-parser.patch +++ /dev/null @@ -1,53 +0,0 @@ -Upstream-Status: Backport - -Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com> - -From 5acd23f4581da58683f3cf5e36cb71bbe4070bd7 Mon Sep 17 00:00:00 2001 -From: Jouni Malinen <j@w1.fi> -Date: Tue, 28 Apr 2015 17:08:33 +0300 -Subject: [PATCH] WPS: Fix HTTP chunked transfer encoding parser - -strtoul() return value may end up overflowing the int h->chunk_size and -resulting in a negative value to be stored as the chunk_size. This could -result in the following memcpy operation using a very large length -argument which would result in a buffer overflow and segmentation fault. - -This could have been used to cause a denial service by any device that -has been authorized for network access (either wireless or wired). This -would affect both the WPS UPnP functionality in a WPS AP (hostapd with -upnp_iface parameter set in the configuration) and WPS ER -(wpa_supplicant with WPS_ER_START control interface command used). - -Validate the parsed chunk length value to avoid this. In addition to -rejecting negative values, we can also reject chunk size that would be -larger than the maximum configured body length. - -Thanks to Kostya Kortchinsky of Google security team for discovering and -reporting this issue. - -Signed-off-by: Jouni Malinen <j@w1.fi> ---- - src/wps/httpread.c | 7 +++++++ - 1 file changed, 7 insertions(+) - -diff --git a/src/wps/httpread.c b/src/wps/httpread.c -index 2f08f37..d2855e3 100644 ---- a/src/wps/httpread.c -+++ b/src/wps/httpread.c -@@ -533,6 +533,13 @@ static void httpread_read_handler(int sd, void *eloop_ctx, void *sock_ctx) - if (!isxdigit(*cbp)) - goto bad; - h->chunk_size = strtoul(cbp, NULL, 16); -+ if (h->chunk_size < 0 || -+ h->chunk_size > h->max_bytes) { -+ wpa_printf(MSG_DEBUG, -+ "httpread: Invalid chunk size %d", -+ h->chunk_size); -+ goto bad; -+ } - /* throw away chunk header - * so we have only real data - */ --- -1.9.1 - diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-build-Re-enable-options-for-libwpa_client.so-and-wpa.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-build-Re-enable-options-for-libwpa_client.so-and-wpa.patch new file mode 100644 index 0000000000..6e930fc98d --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-build-Re-enable-options-for-libwpa_client.so-and-wpa.patch @@ -0,0 +1,73 @@ +From cb41c214b78d6df187a31950342e48a403dbd769 Mon Sep 17 00:00:00 2001 +From: Sergey Matyukevich <geomatsi@gmail.com> +Date: Tue, 22 Feb 2022 11:52:19 +0300 +Subject: [PATCH 1/2] build: Re-enable options for libwpa_client.so and + wpa_passphrase + +Commit a41a29192e5d ("build: Pull common fragments into a build.rules +file") introduced a regression into wpa_supplicant build process. The +build target libwpa_client.so is not built regardless of whether the +option CONFIG_BUILD_WPA_CLIENT_SO is set or not. This happens because +this config option is used before it is imported from the configuration +file. Moving its use after including build.rules does not help: the +variable ALL is processed by build.rules and further changes are not +applied. Similarly, option CONFIG_NO_WPA_PASSPHRASE also does not work +as expected: wpa_passphrase is always built regardless of whether the +option is set or not. + +Re-enable these options by adding both build targets to _all +dependencies. + +Fixes: a41a29192e5d ("build: Pull common fragments into a build.rules file") +Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> +Upstream-Status: Backport +Signed-off-by: Alex Kiernan <alexk@zuma.ai> +Signed-off-by: Alex Kiernan <alexk@gmail.com> +--- + wpa_supplicant/Makefile | 19 ++++++++++++------- + 1 file changed, 12 insertions(+), 7 deletions(-) + +diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile +index cb66defac7c8..c456825ae75f 100644 +--- a/wpa_supplicant/Makefile ++++ b/wpa_supplicant/Makefile +@@ -1,24 +1,29 @@ + BINALL=wpa_supplicant wpa_cli + +-ifndef CONFIG_NO_WPA_PASSPHRASE +-BINALL += wpa_passphrase +-endif +- + ALL = $(BINALL) + ALL += systemd/wpa_supplicant.service + ALL += systemd/wpa_supplicant@.service + ALL += systemd/wpa_supplicant-nl80211@.service + ALL += systemd/wpa_supplicant-wired@.service + ALL += dbus/fi.w1.wpa_supplicant1.service +-ifdef CONFIG_BUILD_WPA_CLIENT_SO +-ALL += libwpa_client.so +-endif + + EXTRA_TARGETS=dynamic_eap_methods + + CONFIG_FILE=.config + include ../src/build.rules + ++ifdef CONFIG_BUILD_WPA_CLIENT_SO ++# add the dependency this way to allow CONFIG_BUILD_WPA_CLIENT_SO ++# being set in the config which is read by build.rules ++_all: libwpa_client.so ++endif ++ ++ifndef CONFIG_NO_WPA_PASSPHRASE ++# add the dependency this way to allow CONFIG_NO_WPA_PASSPHRASE ++# being set in the config which is read by build.rules ++_all: wpa_passphrase ++endif ++ + ifdef LIBS + # If LIBS is set with some global build system defaults, clone those for + # LIBS_c and LIBS_p to cover wpa_passphrase and wpa_cli as well. +-- +2.35.1 + diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0002-EAP-pwd-server-Fix-payload-length-validation-for-Com.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0002-EAP-pwd-server-Fix-payload-length-validation-for-Com.patch deleted file mode 100644 index c477c2f93c..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0002-EAP-pwd-server-Fix-payload-length-validation-for-Com.patch +++ /dev/null @@ -1,70 +0,0 @@ -Upstream-Status: Backport - -Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com> - -From e28a58be26184c2a23f80b410e0997ef1bd5d578 Mon Sep 17 00:00:00 2001 -From: Jouni Malinen <j@w1.fi> -Date: Fri, 1 May 2015 16:40:44 +0300 -Subject: [PATCH 2/5] EAP-pwd server: Fix payload length validation for Commit - and Confirm - -The length of the received Commit and Confirm message payloads was not -checked before reading them. This could result in a buffer read -overflow when processing an invalid message. - -Fix this by verifying that the payload is of expected length before -processing it. In addition, enforce correct state transition sequence to -make sure there is no unexpected behavior if receiving a Commit/Confirm -message before the previous exchanges have been completed. - -Thanks to Kostya Kortchinsky of Google security team for discovering and -reporting this issue. - -Signed-off-by: Jouni Malinen <j@w1.fi> ---- - src/eap_server/eap_server_pwd.c | 19 +++++++++++++++++++ - 1 file changed, 19 insertions(+) - -diff --git a/src/eap_server/eap_server_pwd.c b/src/eap_server/eap_server_pwd.c -index 66bd5d2..3189105 100644 ---- a/src/eap_server/eap_server_pwd.c -+++ b/src/eap_server/eap_server_pwd.c -@@ -656,9 +656,21 @@ eap_pwd_process_commit_resp(struct eap_sm *sm, struct eap_pwd_data *data, - BIGNUM *x = NULL, *y = NULL, *cofactor = NULL; - EC_POINT *K = NULL, *point = NULL; - int res = 0; -+ size_t prime_len, order_len; - - wpa_printf(MSG_DEBUG, "EAP-pwd: Received commit response"); - -+ prime_len = BN_num_bytes(data->grp->prime); -+ order_len = BN_num_bytes(data->grp->order); -+ -+ if (payload_len != 2 * prime_len + order_len) { -+ wpa_printf(MSG_INFO, -+ "EAP-pwd: Unexpected Commit payload length %u (expected %u)", -+ (unsigned int) payload_len, -+ (unsigned int) (2 * prime_len + order_len)); -+ goto fin; -+ } -+ - if (((data->peer_scalar = BN_new()) == NULL) || - ((data->k = BN_new()) == NULL) || - ((cofactor = BN_new()) == NULL) || -@@ -774,6 +786,13 @@ eap_pwd_process_confirm_resp(struct eap_sm *sm, struct eap_pwd_data *data, - u8 conf[SHA256_MAC_LEN], *cruft = NULL, *ptr; - int offset; - -+ if (payload_len != SHA256_MAC_LEN) { -+ wpa_printf(MSG_INFO, -+ "EAP-pwd: Unexpected Confirm payload length %u (expected %u)", -+ (unsigned int) payload_len, SHA256_MAC_LEN); -+ goto fin; -+ } -+ - /* build up the ciphersuite: group | random_function | prf */ - grp = htons(data->group_num); - ptr = (u8 *) &cs; --- -1.9.1 - diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0002-Fix-removal-of-wpa_passphrase-on-make-clean.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0002-Fix-removal-of-wpa_passphrase-on-make-clean.patch new file mode 100644 index 0000000000..53b0fcdf53 --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0002-Fix-removal-of-wpa_passphrase-on-make-clean.patch @@ -0,0 +1,26 @@ +From d001b301ba7987f4b39453a211631b85c48f2ff8 Mon Sep 17 00:00:00 2001 +From: Jouni Malinen <quic_jouni@quicinc.com> +Date: Thu, 3 Mar 2022 13:26:42 +0200 +Subject: [PATCH 2/2] Fix removal of wpa_passphrase on 'make clean' + +Fixes: 0430bc8267b4 ("build: Add a common-clean target") +Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com> +Upstream-Status: Backport +Signed-off-by: Alex Kiernan <alexk@zuma.ai> +Signed-off-by: Alex Kiernan <alexk@gmail.com> +--- + wpa_supplicant/Makefile | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile +index c456825ae75f..4b4688931b1d 100644 +--- a/wpa_supplicant/Makefile ++++ b/wpa_supplicant/Makefile +@@ -2077,3 +2077,4 @@ clean: common-clean + rm -f libwpa_client.a + rm -f libwpa_client.so + rm -f libwpa_test1 libwpa_test2 ++ rm -f wpa_passphrase +-- +2.35.1 + diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0003-EAP-pwd-peer-Fix-Total-Length-parsing-for-fragment-r.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0003-EAP-pwd-peer-Fix-Total-Length-parsing-for-fragment-r.patch deleted file mode 100644 index e46ce436e1..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0003-EAP-pwd-peer-Fix-Total-Length-parsing-for-fragment-r.patch +++ /dev/null @@ -1,56 +0,0 @@ -Upstream-Status: Backport - -Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com> - -From 477c74395acd0123340457ba6f15ab345d42016e Mon Sep 17 00:00:00 2001 -From: Jouni Malinen <j@w1.fi> -Date: Sat, 2 May 2015 19:23:04 +0300 -Subject: [PATCH 3/5] EAP-pwd peer: Fix Total-Length parsing for fragment - reassembly - -The remaining number of bytes in the message could be smaller than the -Total-Length field size, so the length needs to be explicitly checked -prior to reading the field and decrementing the len variable. This could -have resulted in the remaining length becoming negative and interpreted -as a huge positive integer. - -In addition, check that there is no already started fragment in progress -before allocating a new buffer for reassembling fragments. This avoid a -potential memory leak when processing invalid message. - -Signed-off-by: Jouni Malinen <j@w1.fi> ---- - src/eap_peer/eap_pwd.c | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - -diff --git a/src/eap_peer/eap_pwd.c b/src/eap_peer/eap_pwd.c -index a629437..1d2079b 100644 ---- a/src/eap_peer/eap_pwd.c -+++ b/src/eap_peer/eap_pwd.c -@@ -866,11 +866,23 @@ eap_pwd_process(struct eap_sm *sm, void *priv, struct eap_method_ret *ret, - * if it's the first fragment there'll be a length field - */ - if (EAP_PWD_GET_LENGTH_BIT(lm_exch)) { -+ if (len < 2) { -+ wpa_printf(MSG_DEBUG, -+ "EAP-pwd: Frame too short to contain Total-Length field"); -+ ret->ignore = TRUE; -+ return NULL; -+ } - tot_len = WPA_GET_BE16(pos); - wpa_printf(MSG_DEBUG, "EAP-pwd: Incoming fragments whose " - "total length = %d", tot_len); - if (tot_len > 15000) - return NULL; -+ if (data->inbuf) { -+ wpa_printf(MSG_DEBUG, -+ "EAP-pwd: Unexpected new fragment start when previous fragment is still in use"); -+ ret->ignore = TRUE; -+ return NULL; -+ } - data->inbuf = wpabuf_alloc(tot_len); - if (data->inbuf == NULL) { - wpa_printf(MSG_INFO, "Out of memory to buffer " --- -1.9.1 - diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0004-EAP-pwd-server-Fix-Total-Length-parsing-for-fragment.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0004-EAP-pwd-server-Fix-Total-Length-parsing-for-fragment.patch deleted file mode 100644 index a4c02b4745..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0004-EAP-pwd-server-Fix-Total-Length-parsing-for-fragment.patch +++ /dev/null @@ -1,54 +0,0 @@ -Upstream-Status: Backport - -Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com> - -From 3035cc2894e08319b905bd6561e8bddc8c2db9fa Mon Sep 17 00:00:00 2001 -From: Jouni Malinen <j@w1.fi> -Date: Sat, 2 May 2015 19:26:06 +0300 -Subject: [PATCH 4/5] EAP-pwd server: Fix Total-Length parsing for fragment - reassembly - -The remaining number of bytes in the message could be smaller than the -Total-Length field size, so the length needs to be explicitly checked -prior to reading the field and decrementing the len variable. This could -have resulted in the remaining length becoming negative and interpreted -as a huge positive integer. - -In addition, check that there is no already started fragment in progress -before allocating a new buffer for reassembling fragments. This avoid a -potential memory leak when processing invalid message. - -Signed-off-by: Jouni Malinen <j@w1.fi> ---- - src/eap_server/eap_server_pwd.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - -diff --git a/src/eap_server/eap_server_pwd.c b/src/eap_server/eap_server_pwd.c -index 3189105..2bfc3c2 100644 ---- a/src/eap_server/eap_server_pwd.c -+++ b/src/eap_server/eap_server_pwd.c -@@ -942,11 +942,21 @@ static void eap_pwd_process(struct eap_sm *sm, void *priv, - * the first fragment has a total length - */ - if (EAP_PWD_GET_LENGTH_BIT(lm_exch)) { -+ if (len < 2) { -+ wpa_printf(MSG_DEBUG, -+ "EAP-pwd: Frame too short to contain Total-Length field"); -+ return; -+ } - tot_len = WPA_GET_BE16(pos); - wpa_printf(MSG_DEBUG, "EAP-pwd: Incoming fragments, total " - "length = %d", tot_len); - if (tot_len > 15000) - return; -+ if (data->inbuf) { -+ wpa_printf(MSG_DEBUG, -+ "EAP-pwd: Unexpected new fragment start when previous fragment is still in use"); -+ return; -+ } - data->inbuf = wpabuf_alloc(tot_len); - if (data->inbuf == NULL) { - wpa_printf(MSG_INFO, "EAP-pwd: Out of memory to " --- -1.9.1 - diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch deleted file mode 100644 index 4073600732..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch +++ /dev/null @@ -1,36 +0,0 @@ -Upstream-Status: Backport - -Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com> - -From 28a069a545b06b99eb55ad53f63f2c99e65a98f6 Mon Sep 17 00:00:00 2001 -From: Jouni Malinen <j@w1.fi> -Date: Sat, 2 May 2015 19:26:28 +0300 -Subject: [PATCH 5/5] EAP-pwd peer: Fix asymmetric fragmentation behavior - -The L (Length) and M (More) flags needs to be cleared before deciding -whether the locally generated response requires fragmentation. This -fixes an issue where these flags from the server could have been invalid -for the following message. In some cases, this could have resulted in -triggering the wpabuf security check that would terminate the process -due to invalid buffer allocation. - -Signed-off-by: Jouni Malinen <j@w1.fi> ---- - src/eap_peer/eap_pwd.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/src/eap_peer/eap_pwd.c b/src/eap_peer/eap_pwd.c -index 1d2079b..e58b13a 100644 ---- a/src/eap_peer/eap_pwd.c -+++ b/src/eap_peer/eap_pwd.c -@@ -968,6 +968,7 @@ eap_pwd_process(struct eap_sm *sm, void *priv, struct eap_method_ret *ret, - /* - * we have output! Do we need to fragment it? - */ -+ lm_exch = EAP_PWD_GET_EXCHANGE(lm_exch); - len = wpabuf_len(data->outbuf); - if ((len + EAP_PWD_HDR_SIZE) > data->mtu) { - resp = eap_msg_alloc(EAP_VENDOR_IETF, EAP_TYPE_PWD, data->mtu, --- -1.9.1 - diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig deleted file mode 100644 index f04e398fdb..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig +++ /dev/null @@ -1,552 +0,0 @@ -# Example wpa_supplicant build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cases, these lines should use += in order not -# to override previous values of the variables. - - -# Uncomment following two lines and fix the paths if you have installed OpenSSL -# or GnuTLS in non-default location -#CFLAGS += -I/usr/local/openssl/include -#LIBS += -L/usr/local/openssl/lib - -# Some Red Hat versions seem to include kerberos header files from OpenSSL, but -# the kerberos files are not in the default include path. Following line can be -# used to fix build issues on such systems (krb5.h not found). -#CFLAGS += -I/usr/include/kerberos - -# Example configuration for various cross-compilation platforms - -#### sveasoft (e.g., for Linksys WRT54G) ###################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS += -I../src/include -I../../src/router/openssl/include -#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl -############################################################################### - -#### openwrt (e.g., for Linksys WRT54G) ####################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ -# -I../WRT54GS/release/src/include -#LIBS = -lssl -############################################################################### - - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for Agere driver -#CONFIG_DRIVER_HERMES=y -# Change include directories to match with the local setup -#CFLAGS += -I../../hcf -I../../include -I../../include/hcf -#CFLAGS += -I../../include/wireless - -# Driver interface for madwifi driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_MADWIFI=y -# Set include directory to the madwifi source tree -#CFLAGS += -I../../madwifi - -# Driver interface for ndiswrapper -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_NDISWRAPPER=y - -# Driver interface for Atmel driver -# CONFIG_DRIVER_ATMEL=y - -# Driver interface for old Broadcom driver -# Please note that the newer Broadcom driver ("hybrid Linux driver") supports -# Linux wireless extensions and does not need (or even work) with the old -# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. -#CONFIG_DRIVER_BROADCOM=y -# Example path for wlioctl.h; change to match your configuration -#CFLAGS += -I/opt/WRT54GS/release/src/include - -# Driver interface for Intel ipw2100/2200 driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_IPW=y - -# Driver interface for Ralink driver -#CONFIG_DRIVER_RALINK=y - -# Driver interface for generic Linux wireless extensions -# Note: WEXT is deprecated in the current Linux kernel version and no new -# functionality is added to it. nl80211-based interface is the new -# replacement for WEXT and its use allows wpa_supplicant to properly control -# the driver to improve existing functionality like roaming and to support new -# functionality. -CONFIG_DRIVER_WEXT=y - -# Driver interface for Linux drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y - -# driver_nl80211.c requires libnl. If you are compiling it yourself -# you may need to point hostapd to your version of libnl. -# -#CFLAGS += -I$<path to libnl include files> -#LIBS += -L$<path to libnl library files> - -# Use libnl v2.0 (or 3.0) libraries. -#CONFIG_LIBNL20=y - -# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) -CONFIG_LIBNL32=y - - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib -#LIBS_p += -L/usr/local/lib -#LIBS_c += -L/usr/local/lib - -# Driver interface for Windows NDIS -#CONFIG_DRIVER_NDIS=y -#CFLAGS += -I/usr/include/w32api/ddk -#LIBS += -L/usr/local/lib -# For native build using mingw -#CONFIG_NATIVE_WINDOWS=y -# Additional directories for cross-compilation on Linux host for mingw target -#CFLAGS += -I/opt/mingw/mingw32/include/ddk -#LIBS += -L/opt/mingw/mingw32/lib -#CC=mingw32-gcc -# By default, driver_ndis uses WinPcap for low-level operations. This can be -# replaced with the following option which replaces WinPcap calls with NDISUIO. -# However, this requires that WZC is disabled (net stop wzcsvc) before starting -# wpa_supplicant. -# CONFIG_USE_NDISUIO=y - -# Driver interface for development testing -#CONFIG_DRIVER_TEST=y - -# Driver interface for wired Ethernet drivers -CONFIG_DRIVER_WIRED=y - -# Driver interface for the Broadcom RoboSwitch family -#CONFIG_DRIVER_ROBOSWITCH=y - -# Driver interface for no driver (e.g., WPS ER only) -#CONFIG_DRIVER_NONE=y - -# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is -# included) -CONFIG_IEEE8021X_EAPOL=y - -# EAP-MD5 -CONFIG_EAP_MD5=y - -# EAP-MSCHAPv2 -CONFIG_EAP_MSCHAPV2=y - -# EAP-TLS -CONFIG_EAP_TLS=y - -# EAL-PEAP -CONFIG_EAP_PEAP=y - -# EAP-TTLS -CONFIG_EAP_TTLS=y - -# EAP-FAST -# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed -# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., -# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. -#CONFIG_EAP_FAST=y - -# EAP-GTC -CONFIG_EAP_GTC=y - -# EAP-OTP -CONFIG_EAP_OTP=y - -# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) -#CONFIG_EAP_SIM=y - -# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-pwd (secure authentication using only a password) -#CONFIG_EAP_PWD=y - -# EAP-PAX -#CONFIG_EAP_PAX=y - -# LEAP -CONFIG_EAP_LEAP=y - -# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) -#CONFIG_EAP_AKA=y - -# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# Enable USIM simulator (Milenage) for EAP-AKA -#CONFIG_USIM_SIMULATOR=y - -# EAP-SAKE -#CONFIG_EAP_SAKE=y - -# EAP-GPSK -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-TNC and related Trusted Network Connect support (experimental) -#CONFIG_EAP_TNC=y - -# Wi-Fi Protected Setup (WPS) -CONFIG_WPS=y -# Enable WSC 2.0 support -#CONFIG_WPS2=y -# Enable WPS external registrar functionality -#CONFIG_WPS_ER=y -# Disable credentials for an open network by default when acting as a WPS -# registrar. -#CONFIG_WPS_REG_DISABLE_OPEN=y -# Enable WPS support with NFC config method -#CONFIG_WPS_NFC=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# EAP-EKE -#CONFIG_EAP_EKE=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# Smartcard support (i.e., private key on a smartcard), e.g., with openssl -# engine. -CONFIG_SMARTCARD=y - -# PC/SC interface for smartcards (USIM, GSM SIM) -# Enable this if EAP-SIM or EAP-AKA is included -#CONFIG_PCSC=y - -# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) -#CONFIG_HT_OVERRIDES=y - -# Support VHT overrides (disable VHT, mask MCS rates, etc.) -#CONFIG_VHT_OVERRIDES=y - -# Development testing -#CONFIG_EAPOL_TEST=y - -# Select control interface backend for external programs, e.g, wpa_cli: -# unix = UNIX domain sockets (default for Linux/*BSD) -# udp = UDP sockets using localhost (127.0.0.1) -# named_pipe = Windows Named Pipe (default for Windows) -# udp-remote = UDP sockets with remote access (only for tests systems/purpose) -# y = use default (backwards compatibility) -# If this option is commented out, control interface is not included in the -# build. -CONFIG_CTRL_IFACE=y - -# Include support for GNU Readline and History Libraries in wpa_cli. -# When building a wpa_cli binary for distribution, please note that these -# libraries are licensed under GPL and as such, BSD license may not apply for -# the resulting binary. -#CONFIG_READLINE=y - -# Include internal line edit mode in wpa_cli. This can be used as a replacement -# for GNU Readline to provide limited command line editing and history support. -#CONFIG_WPA_CLI_EDIT=y - -# Remove debugging code that is printing out debug message to stdout. -# This can be used to reduce the size of the wpa_supplicant considerably -# if debugging code is not needed. The size reduction can be around 35% -# (e.g., 90 kB). -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save -# 35-50 kB in code size. -#CONFIG_NO_WPA=y - -# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support -# This option can be used to reduce code size by removing support for -# converting ASCII passphrases into PSK. If this functionality is removed, the -# PSK can only be configured as the 64-octet hexstring (e.g., from -# wpa_passphrase). This saves about 0.5 kB in code size. -#CONFIG_NO_WPA_PASSPHRASE=y - -# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. -# This can be used if ap_scan=1 mode is never enabled. -#CONFIG_NO_SCAN_PROCESSING=y - -# Select configuration backend: -# file = text file (e.g., wpa_supplicant.conf; note: the configuration file -# path is given on command line, not here; this option is just used to -# select the backend that allows configuration files to be used) -# winreg = Windows registry (see win_example.reg for an example) -CONFIG_BACKEND=file - -# Remove configuration write functionality (i.e., to allow the configuration -# file to be updated based on runtime configuration changes). The runtime -# configuration can still be changed, the changes are just not going to be -# persistent over restarts. This option can be used to reduce code size by -# about 3.5 kB. -#CONFIG_NO_CONFIG_WRITE=y - -# Remove support for configuration blobs to reduce code size by about 1.5 kB. -#CONFIG_NO_CONFIG_BLOBS=y - -# Select program entry point implementation: -# main = UNIX/POSIX like main() function (default) -# main_winsvc = Windows service (read parameters from registry) -# main_none = Very basic example (development use only) -#CONFIG_MAIN=main - -# Select wrapper for operatins system and C library specific functions -# unix = UNIX/POSIX like systems (default) -# win32 = Windows systems -# none = Empty template -#CONFIG_OS=unix - -# Select event loop implementation -# eloop = select() loop (default) -# eloop_win = Windows events and WaitForMultipleObject() loop -#CONFIG_ELOOP=eloop - -# Should we use poll instead of select? Select is used by default. -#CONFIG_ELOOP_POLL=y - -# Select layer 2 packet implementation -# linux = Linux packet socket (default) -# pcap = libpcap/libdnet/WinPcap -# freebsd = FreeBSD libpcap -# winpcap = WinPcap with receive thread -# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) -# none = Empty template -#CONFIG_L2_PACKET=linux - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection), also known as PMF -# Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y - -# Select TLS implementation -# openssl = OpenSSL (default) -# gnutls = GnuTLS -# internal = Internal TLSv1 implementation (experimental) -# none = Empty template -#CONFIG_TLS=openssl - -# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) -# can be enabled to get a stronger construction of messages when block ciphers -# are used. It should be noted that some existing TLS v1.0 -based -# implementation may not be compatible with TLS v1.1 message (ClientHello is -# sent prior to negotiating which version will be used) -#CONFIG_TLSV11=y - -# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) -# can be enabled to enable use of stronger crypto algorithms. It should be -# noted that some existing TLS v1.0 -based implementation may not be compatible -# with TLS v1.2 message (ClientHello is sent prior to negotiating which version -# will be used) -#CONFIG_TLSV12=y - -# If CONFIG_TLS=internal is used, additional library and include paths are -# needed for LibTomMath. Alternatively, an integrated, minimal version of -# LibTomMath can be used. See beginning of libtommath.c for details on benefits -# and drawbacks of this option. -#CONFIG_INTERNAL_LIBTOMMATH=y -#ifndef CONFIG_INTERNAL_LIBTOMMATH -#LTM_PATH=/usr/src/libtommath-0.39 -#CFLAGS += -I$(LTM_PATH) -#LIBS += -L$(LTM_PATH) -#LIBS_p += -L$(LTM_PATH) -#endif -# At the cost of about 4 kB of additional binary size, the internal LibTomMath -# can be configured to include faster routines for exptmod, sqr, and div to -# speed up DH and RSA calculation considerably -#CONFIG_INTERNAL_LIBTOMMATH_FAST=y - -# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. -# This is only for Windows builds and requires WMI-related header files and -# WbemUuid.Lib from Platform SDK even when building with MinGW. -#CONFIG_NDIS_EVENTS_INTEGRATED=y -#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" - -# Add support for old DBus control interface -# (fi.epitest.hostap.WPASupplicant) -#CONFIG_CTRL_IFACE_DBUS=y - -# Add support for new DBus control interface -# (fi.w1.hostap.wpa_supplicant1) -CONFIG_CTRL_IFACE_DBUS_NEW=y - -# Add introspection support for new DBus control interface -#CONFIG_CTRL_IFACE_DBUS_INTRO=y - -# Add support for loading EAP methods dynamically as shared libraries. -# When this option is enabled, each EAP method can be either included -# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn). -# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to -# be loaded in the beginning of the wpa_supplicant configuration file -# (see load_dynamic_eap parameter in the example file) before being used in -# the network blocks. -# -# Note that some shared parts of EAP methods are included in the main program -# and in order to be able to use dynamic EAP methods using these parts, the -# main program must have been build with the EAP method enabled (=y or =dyn). -# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries -# unless at least one of them was included in the main build to force inclusion -# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included -# in the main build to be able to load these methods dynamically. -# -# Please also note that using dynamic libraries will increase the total binary -# size. Thus, it may not be the best option for targets that have limited -# amount of memory/flash. -#CONFIG_DYNAMIC_EAP_METHODS=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) -#CONFIG_DEBUG_FILE=y - -# Send debug messages to syslog instead of stdout -#CONFIG_DEBUG_SYSLOG=y -# Set syslog facility for debug messages -#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON - -# Add support for sending all debug messages (regardless of debug verbosity) -# to the Linux kernel tracing facility. This helps debug the entire stack by -# making it easy to record everything happening from the driver up into the -# same file, e.g., using trace-cmd. -#CONFIG_DEBUG_LINUX_TRACING=y - -# Enable privilege separation (see README 'Privilege separation' for details) -#CONFIG_PRIVSEP=y - -# Enable mitigation against certain attacks against TKIP by delaying Michael -# MIC error reports by a random amount of time between 0 and 60 seconds -#CONFIG_DELAYED_MIC_ERROR_REPORT=y - -# Enable tracing code for developer debugging -# This tracks use of memory allocations and other registrations and reports -# incorrect use with a backtrace of call (or allocation) location. -#CONFIG_WPA_TRACE=y -# For BSD, uncomment these. -#LIBS += -lexecinfo -#LIBS_p += -lexecinfo -#LIBS_c += -lexecinfo - -# Use libbfd to get more details for developer debugging -# This enables use of libbfd to get more detailed symbols for the backtraces -# generated by CONFIG_WPA_TRACE=y. -#CONFIG_WPA_TRACE_BFD=y -# For BSD, uncomment these. -#LIBS += -lbfd -liberty -lz -#LIBS_p += -lbfd -liberty -lz -#LIBS_c += -lbfd -liberty -lz - -CONFIG_TLS = %ssl% -CONFIG_CTRL_IFACE_DBUS=y -CONFIG_CTRL_IFACE_DBUS_NEW=y - -# wpa_supplicant depends on strong random number generation being available -# from the operating system. os_get_random() function is used to fetch random -# data when needed, e.g., for key generation. On Linux and BSD systems, this -# works by reading /dev/urandom. It should be noted that the OS entropy pool -# needs to be properly initialized before wpa_supplicant is started. This is -# important especially on embedded devices that do not have a hardware random -# number generator and may by default start up with minimal entropy available -# for random number generation. -# -# As a safety net, wpa_supplicant is by default trying to internally collect -# additional entropy for generating random data to mix in with the data fetched -# from the OS. This by itself is not considered to be very strong, but it may -# help in cases where the system pool is not initialized properly. However, it -# is very strongly recommended that the system pool is initialized with enough -# entropy either by using hardware assisted random number generator or by -# storing state over device reboots. -# -# wpa_supplicant can be configured to maintain its own entropy store over -# restarts to enhance random number generation. This is not perfect, but it is -# much more secure than using the same sequence of random numbers after every -# reboot. This can be enabled with -e<entropy file> command line option. The -# specified file needs to be readable and writable by wpa_supplicant. -# -# If the os_get_random() is known to provide strong random data (e.g., on -# Linux/BSD, the board in question is known to have reliable source of random -# data from /dev/urandom), the internal wpa_supplicant random pool can be -# disabled. This will save some in binary size and CPU use. However, this -# should only be considered for builds that are known to be used on devices -# that meet the requirements described above. -#CONFIG_NO_RANDOM_POOL=y - -# IEEE 802.11n (High Throughput) support (mainly for AP mode) -#CONFIG_IEEE80211N=y - -# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode) -# (depends on CONFIG_IEEE80211N) -#CONFIG_IEEE80211AC=y - -# Wireless Network Management (IEEE Std 802.11v-2011) -# Note: This is experimental and not complete implementation. -#CONFIG_WNM=y - -# Interworking (IEEE 802.11u) -# This can be used to enable functionality to improve interworking with -# external networks (GAS/ANQP to learn more about the networks and network -# selection based on available credentials). -#CONFIG_INTERWORKING=y - -# Hotspot 2.0 -#CONFIG_HS20=y - -# Disable roaming in wpa_supplicant -#CONFIG_NO_ROAMING=y - -# AP mode operations with wpa_supplicant -# This can be used for controlling AP mode operations with wpa_supplicant. It -# should be noted that this is mainly aimed at simple cases like -# WPA2-Personal while more complex configurations like WPA2-Enterprise with an -# external RADIUS server can be supported with hostapd. -CONFIG_AP=y - -CONFIG_BGSCAN_SIMPLE=y - -# P2P (Wi-Fi Direct) -# This can be used to enable P2P support in wpa_supplicant. See README-P2P for -# more information on P2P operations. -#CONFIG_P2P=y - -# Enable TDLS support -#CONFIG_TDLS=y - -# Wi-Fi Direct -# This can be used to enable Wi-Fi Direct extensions for P2P using an external -# program to control the additional information exchanges in the messages. -#CONFIG_WIFI_DISPLAY=y - -# Autoscan -# This can be used to enable automatic scan support in wpa_supplicant. -# See wpa_supplicant.conf for more information on autoscan usage. -# -# Enabling directly a module will enable autoscan support. -# For exponential module: -CONFIG_AUTOSCAN_EXPONENTIAL=y -# For periodic module: -#CONFIG_AUTOSCAN_PERIODIC=y - -# Password (and passphrase, etc.) backend for external storage -# These optional mechanisms can be used to add support for storing passwords -# and other secrets in external (to wpa_supplicant) location. This allows, for -# example, operating system specific key storage to be used -# -# External password backend for testing purposes (developer use) -#CONFIG_EXT_PASSWORD_TEST=y diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa-supplicant.sh b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa-supplicant.sh index 5c9e5d33a7..35a1aa639e 100644 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa-supplicant.sh +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa-supplicant.sh @@ -4,6 +4,7 @@ WPA_SUP_BIN="/usr/sbin/wpa_supplicant" WPA_SUP_PNAME="wpa_supplicant" WPA_SUP_PIDFILE="/var/run/wpa_supplicant.$IFACE.pid" +WPA_COMMON_CTRL_IFACE="/var/run/wpa_supplicant" WPA_SUP_OPTIONS="-B -P $WPA_SUP_PIDFILE -i $IFACE" VERBOSITY=0 |