diff options
Diffstat (limited to 'meta/recipes-bsp/lrzsz/lrzsz-0.12.20/autotools-update.patch')
| -rw-r--r-- | meta/recipes-bsp/lrzsz/lrzsz-0.12.20/autotools-update.patch | 36701 |
1 files changed, 36701 insertions, 0 deletions
diff --git a/meta/recipes-bsp/lrzsz/lrzsz-0.12.20/autotools-update.patch b/meta/recipes-bsp/lrzsz/lrzsz-0.12.20/autotools-update.patch new file mode 100644 index 0000000000..fa78599f38 --- /dev/null +++ b/meta/recipes-bsp/lrzsz/lrzsz-0.12.20/autotools-update.patch @@ -0,0 +1,36701 @@ +Update autotools infrastructure (including gettext) to modern versions. + +Upstream-Status: Pending +Signed-off-by: Phil Blundell <pb@pbcl.net> + +diff -uprN clean/lrzsz-0.12.20/ABOUT-NLS lrzsz-0.12.20/ABOUT-NLS +--- clean/lrzsz-0.12.20/ABOUT-NLS 1998-04-26 14:22:30.000000000 +0100 ++++ lrzsz-0.12.20/ABOUT-NLS 2019-11-25 18:21:17.000000000 +0000 +@@ -1,225 +1 @@ +-Notes on the Free Translation Project +-************************************* +- +- Free software is going international! The Free Translation Project +-is a way to get maintainers of free software, translators, and users all +-together, so that will gradually become able to speak many languages. +-A few packages already provide translations for their messages. +- +- If you found this `ABOUT-NLS' file inside a distribution, you may +-assume that the distributed package does use GNU `gettext' internally, +-itself available at your nearest GNU archive site. But you do *not* +-need to install GNU `gettext' prior to configuring, installing or using +-this package with messages translated. +- +- Installers will find here some useful hints. These notes also +-explain how users should proceed for getting the programs to use the +-available translations. They tell how people wanting to contribute and +-work at translations should contact the appropriate team. +- +- When reporting bugs in the `intl/' directory or bugs which may be +-related to internationalization, you should tell about the version of +-`gettext' which is used. The information can be found in the +-`intl/VERSION' file, in internationalized packages. +- +-One advise in advance +-===================== +- +- If you want to exploit the full power of internationalization, you +-should configure it using +- +- ./configure --with-included-gettext +- +-to force usage of internationalizing routines provided within this +-package, despite the existence of internationalizing capabilities in the +-operating system where this package is being installed. So far, only +-the `gettext' implementation in the GNU C library version 2 provides as +-many features (such as locale alias or message inheritance) as the +-implementation here. It is also not possible to offer this additional +-functionality on top of a `catgets' implementation. Future versions of +-GNU `gettext' will very likely convey even more functionality. So it +-might be a good idea to change to GNU `gettext' as soon as possible. +- +- So you need not provide this option if you are using GNU libc 2 or +-you have installed a recent copy of the GNU gettext package with the +-included `libintl'. +- +-INSTALL Matters +-=============== +- +- Some packages are "localizable" when properly installed; the +-programs they contain can be made to speak your own native language. +-Most such packages use GNU `gettext'. Other packages have their own +-ways to internationalization, predating GNU `gettext'. +- +- By default, this package will be installed to allow translation of +-messages. It will automatically detect whether the system provides +-usable `catgets' (if using this is selected by the installer) or +-`gettext' functions. If neither is available, the GNU `gettext' own +-library will be used. This library is wholly contained within this +-package, usually in the `intl/' subdirectory, so prior installation of +-the GNU `gettext' package is *not* required. Installers may use +-special options at configuration time for changing the default +-behaviour. The commands: +- +- ./configure --with-included-gettext +- ./configure --with-catgets +- ./configure --disable-nls +- +-will respectively bypass any pre-existing `catgets' or `gettext' to use +-the internationalizing routines provided within this package, enable +-the use of the `catgets' functions (if found on the locale system), or +-else, *totally* disable translation of messages. +- +- When you already have GNU `gettext' installed on your system and run +-configure without an option for your new package, `configure' will +-probably detect the previously built and installed `libintl.a' file and +-will decide to use this. This might be not what is desirable. You +-should use the more recent version of the GNU `gettext' library. I.e. +-if the file `intl/VERSION' shows that the library which comes with this +-package is more recent, you should use +- +- ./configure --with-included-gettext +- +-to prevent auto-detection. +- +- By default the configuration process will not test for the `catgets' +-function and therefore they will not be used. The reasons are already +-given above: the emulation on top of `catgets' cannot provide all the +-extensions provided by the GNU `gettext' library. If you nevertheless +-want to use the `catgets' functions use +- +- ./configure --with-catgets +- +-to enable the test for `catgets' (this causes no harm if `catgets' is +-not available on your system). If you really select this option we +-would like to hear about the reasons because we cannot think of any +-good one ourself. +- +- Internationalized packages have usually many `po/LL.po' files, where +-LL gives an ISO 639 two-letter code identifying the language. Unless +-translations have been forbidden at `configure' time by using the +-`--disable-nls' switch, all available translations are installed +-together with the package. However, the environment variable `LINGUAS' +-may be set, prior to configuration, to limit the installed set. +-`LINGUAS' should then contain a space separated list of two-letter +-codes, stating which languages are allowed. +- +-Using This Package +-================== +- +- As a user, if your language has been installed for this package, you +-only have to set the `LANG' environment variable to the appropriate +-ISO 639 `LL' two-letter code prior to using the programs in the +-package. For example, let's suppose that you speak German. At the +-shell prompt, merely execute `setenv LANG de' (in `csh'), +-`export LANG; LANG=de' (in `sh') or `export LANG=de' (in `bash'). This +-can be done from your `.login' or `.profile' file, once and for all. +- +- An operating system might already offer message localization for +-many of its programs, while other programs have been installed locally +-with the full capabilities of GNU `gettext'. Just using `gettext' +-extended syntax for `LANG' would break proper localization of already +-available operating system programs. In this case, users should set +-both `LANGUAGE' and `LANG' variables in their environment, as programs +-using GNU `gettext' give preference to `LANGUAGE'. For example, some +-Swedish users would rather read translations in German than English for +-when Swedish is not available. This is easily accomplished by setting +-`LANGUAGE' to `sv:de' while leaving `LANG' to `sv'. +- +-Translating Teams +-================= +- +- For the Free Translation Project to be a success, we need interested +-people who like their own language and write it well, and who are also +-able to synergize with other translators speaking the same language. +-Each translation team has its own mailing list, courtesy of Linux +-International. You may reach your translation team at the address +-`LL@li.org', replacing LL by the two-letter ISO 639 code for your +-language. Language codes are *not* the same as the country codes given +-in ISO 3166. The following translation teams exist, as of August 1997: +- +- Chinese `zh', Czech `cs', Danish `da', Dutch `nl', English `en', +- Esperanto `eo', Finnish `fi', French `fr', German `de', Hungarian +- `hu', Irish `ga', Italian `it', Indonesian `id', Japanese `ja', +- Korean `ko', Latin `la', Norwegian `no', Persian `fa', Polish +- `pl', Portuguese `pt', Russian `ru', Slovenian `sl', Spanish `es', +- Swedish `sv', and Turkish `tr'. +- +-For example, you may reach the Chinese translation team by writing to +-`zh@li.org'. +- +- If you'd like to volunteer to *work* at translating messages, you +-should become a member of the translating team for your own language. +-The subscribing address is *not* the same as the list itself, it has +-`-request' appended. For example, speakers of Swedish can send a +-message to `sv-request@li.org', having this message body: +- +- subscribe +- +- Keep in mind that team members are expected to participate +-*actively* in translations, or at solving translational difficulties, +-rather than merely lurking around. If your team does not exist yet and +-you want to start one, or if you are unsure about what to do or how to +-get started, please write to `translation@iro.umontreal.ca' to reach the +-coordinator for all translator teams. +- +- The English team is special. It works at improving and uniformizing +-the terminology in use. Proven linguistic skill are praised more than +-programming skill, here. +- +-Available Packages +-================== +- +- Languages are not equally supported in all packages. The following +-matrix shows the current state of internationalization, as of August +-1997. The matrix shows, in regard of each package, for which languages +-PO files have been submitted to translation coordination. +- +- Ready PO files cs da de en es fi fr it ja ko nl no pl pt sl sv +- .-------------------------------------------------. +- bash | [] [] [] | 3 +- bison | [] [] [] | 3 +- clisp | [] [] [] [] | 4 +- cpio | [] [] [] [] [] | 5 +- diffutils | [] [] [] [] [] | 5 +- enscript | [] [] [] [] [] [] | 6 +- fileutils | [] [] [] [] [] [] [] [] [] [] | 10 +- findutils | [] [] [] [] [] [] [] [] | 8 +- flex | [] [] [] [] | 4 +- gcal | [] [] [] [] [] | 5 +- gettext | [] [] [] [] [] [] [] [] [] [] | 11 +- grep | [] [] [] [] [] [] [] [] [] | 9 +- hello | [] [] [] [] [] [] [] [] [] [] | 10 +- id-utils | [] [] [] | 3 +- indent | [] [] [] [] | 4 +- libc | [] [] [] [] [] [] [] | 7 +- m4 | [] [] [] [] [] | 5 +- make | [] [] [] [] [] [] | 6 +- music | [] [] | 2 +- ptx | [] [] [] [] [] [] [] [] | 8 +- recode | [] [] [] [] [] [] [] [] [] | 9 +- sh-utils | [] [] [] [] [] [] [] | 7 +- sharutils | [] [] [] [] [] | 5 +- tar | [] [] [] [] [] [] [] [] [] [] | 10 +- texinfo | [] | 1 +- textutils | [] [] [] [] [] [] [] [] [] | 9 +- wdiff | [] [] [] [] [] [] [] [] | 8 +- `-------------------------------------------------' +- 16 languages cs da de en es fi fr it ja ko nl no pl pt sl sv +- 27 packages 3 2 24 1 17 1 26 2 1 11 20 9 19 7 7 17 167 +- +- Some counters in the preceding matrix are higher than the number of +-visible blocks let us expect. This is because a few extra PO files are +-used for implementing regional variants of languages, or language +-dialects. +- +- For a PO file in the matrix above to be effective, the package to +-which it applies should also have been internationalized and +-distributed as such by its maintainer. There might be an observable +-lag between the mere existence a PO file and its wide availability in a +-distribution. +- +- If August 1997 seems to be old, you may fetch a more recent copy of +-this `ABOUT-NLS' file on most GNU archive sites. +- ++<https://www.gnu.org/software/gettext/manual/html_node/Users.html> +diff -uprN clean/lrzsz-0.12.20/aclocal.m4 lrzsz-0.12.20/aclocal.m4 +--- clean/lrzsz-0.12.20/aclocal.m4 1998-12-30 07:50:12.000000000 +0000 ++++ lrzsz-0.12.20/aclocal.m4 2019-11-26 11:37:44.000000000 +0000 +@@ -1,699 +1,1120 @@ +-dnl aclocal.m4 generated automatically by aclocal 1.3 ++# generated automatically by aclocal 1.16.1 -*- Autoconf -*- + +-dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. +-dnl This Makefile.in is free software; the Free Software Foundation +-dnl gives unlimited permission to copy and/or distribute it, +-dnl with or without modifications, as long as this notice is preserved. +- +-dnl This program is distributed in the hope that it will be useful, +-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +-dnl PARTICULAR PURPOSE. +- +-dnl AC_REPLACE_GNU_GETOPT +-AC_DEFUN(AC_REPLACE_GNU_GETOPT, +-[AC_CHECK_FUNC(getopt_long, , [LIBOBJS="$LIBOBJS getopt1.o getopt.o"]) +-AC_SUBST(LIBOBJS)dnl +-]) ++# Copyright (C) 1996-2018 Free Software Foundation, Inc. + +-dnl +-dnl taken from taylor uucp +-AC_DEFUN(LRZSZ_ERRNO_DECL,[ +-AC_MSG_CHECKING(for errno declaration) +-AC_CACHE_VAL(lrzsz_cv_decl_errno, +-[AC_TRY_COMPILE([#include <errno.h>], [int i = errno; errno = 1;], +-lrzsz_cv_decl_errno=yes, lrzsz_cv_decl_errno=no)]) +-AC_MSG_RESULT($lrzsz_cv_decl_errno) +-if test $lrzsz_cv_decl_errno = yes; then +- AC_DEFINE([HAVE_ERRNO_DECLARATION]) +-fi +-]) +- +-dnl for ease of use +-AC_DEFUN([LRZSZ_HEADERS_TERM_IO],[ +-AC_CHECK_HEADERS(termios.h sys/termios.h termio.h sys/termio.h sgtty.h)dnl +-]) +- +-dnl LRZSZ_TYPE_SPEED_T +-AC_DEFUN(LRZSZ_TYPE_SPEED_T,[ +-AC_REQUIRE([AC_HEADER_STDC])dnl +-AC_REQUIRE([LRZSZ_HEADERS_TERM_IO])dnl +-AC_MSG_CHECKING(for speed_t) +-AC_CACHE_VAL(ac_cv_type_speed_t, +-[AC_EGREP_CPP(speed_t, [#include <sys/types.h> +-#if STDC_HEADERS +-#include <stdlib.h> +-#include <stddef.h> +-#endif +-#ifdef HAVE_TERMIOS_H +-#include <termios.h> +-#else +-#if defined(HAVE_SYS_TERMIOS_H) +-#include <sys/termios.h> +-#else +-#if defined(HAVE_TERMIO_H) +-#include <termio.h> +-#else +-#if defined(HAVE_SYS_TERMIO_H) +-#include <sys/termio.h> +-#else +-#if defined(HAVE_SGTTY_H) +-#include <sgtty.h> +-#else +-#error neither termio.h nor sgtty.h found. Cannot continue. */ +-#endif +-#endif +-#endif +-#endif +-#endif +-], ac_cv_type_speed_t=yes, ac_cv_type_speed_t=no)])dnl +-AC_MSG_RESULT($ac_cv_type_speed_t) +-if test $ac_cv_type_speed_t = no; then +- AC_DEFINE([speed_t],long) +-fi +-]) +- +-AC_DEFUN(lrzsz_HEADER_SYS_SELECT, +-[AC_CACHE_CHECK([whether sys/time.h and sys/select.h may both be included], +- lrzsz_cv_header_sys_select, +-[AC_TRY_COMPILE([#include <sys/types.h> +-#include <sys/time.h> +-#include <sys/select.h>], +-[struct tm *tp;], lrzsz_cv_header_sys_select=yes, lrzsz_cv_header_sys_select=no)]) +-if test $lrzsz_cv_header_sys_select = no; then +- AC_DEFINE(SYS_TIME_WITHOUT_SYS_SELECT) +-fi +-]) +- +- +-# Do all the work for Automake. This macro actually does too much -- +-# some checks are only needed if your package does certain things. +-# But this isn't really a big deal. +- +-# serial 1 +- +-dnl Usage: +-dnl AM_INIT_AUTOMAKE(package,version, [no-define]) +- +-AC_DEFUN(AM_INIT_AUTOMAKE, +-[AC_REQUIRE([AM_PROG_INSTALL]) +-PACKAGE=[$1] +-AC_SUBST(PACKAGE) +-VERSION=[$2] +-AC_SUBST(VERSION) +-dnl test to see if srcdir already configured +-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then +- AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +-fi +-ifelse([$3],, +-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE") +-AC_DEFINE_UNQUOTED(VERSION, "$VERSION")) +-AC_REQUIRE([AM_SANITY_CHECK]) +-AC_REQUIRE([AC_ARG_PROGRAM]) +-dnl FIXME This is truly gross. +-missing_dir=`cd $ac_aux_dir && pwd` +-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) +-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) +-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) +-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) +-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) +-AC_REQUIRE([AC_PROG_MAKE_SET])]) +- +- +-# serial 1 +- +-AC_DEFUN(AM_PROG_INSTALL, +-[AC_REQUIRE([AC_PROG_INSTALL]) +-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' +-AC_SUBST(INSTALL_SCRIPT)dnl ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without ++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A ++# PARTICULAR PURPOSE. ++ ++m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) ++m4_ifndef([AC_AUTOCONF_VERSION], ++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl ++m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, ++[m4_warning([this file was generated for autoconf 2.69. ++You have another version of autoconf. It may work, but is not guaranteed to. ++If you have problems, you may need to regenerate the build system entirely. ++To do so, use the procedure documented by the package, typically 'autoreconf'.])]) ++ ++# Copyright (C) 2002-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_AUTOMAKE_VERSION(VERSION) ++# ---------------------------- ++# Automake X.Y traces this macro to ensure aclocal.m4 has been ++# generated from the m4 files accompanying Automake X.Y. ++# (This private macro should not be called outside this file.) ++AC_DEFUN([AM_AUTOMAKE_VERSION], ++[am__api_version='1.16' ++dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to ++dnl require some minimum version. Point them to the right macro. ++m4_if([$1], [1.16.1], [], ++ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl + ]) + ++# _AM_AUTOCONF_VERSION(VERSION) ++# ----------------------------- ++# aclocal traces this macro to find the Autoconf version. ++# This is a private macro too. Using m4_define simplifies ++# the logic in aclocal, which can simply ignore this definition. ++m4_define([_AM_AUTOCONF_VERSION], []) ++ ++# AM_SET_CURRENT_AUTOMAKE_VERSION ++# ------------------------------- ++# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. ++# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. ++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], ++[AM_AUTOMAKE_VERSION([1.16.1])dnl ++m4_ifndef([AC_AUTOCONF_VERSION], ++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl ++_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) ++ ++# AM_AUX_DIR_EXPAND -*- Autoconf -*- ++ ++# Copyright (C) 2001-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets ++# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to ++# '$srcdir', '$srcdir/..', or '$srcdir/../..'. ++# ++# Of course, Automake must honor this variable whenever it calls a ++# tool from the auxiliary directory. The problem is that $srcdir (and ++# therefore $ac_aux_dir as well) can be either absolute or relative, ++# depending on how configure is run. This is pretty annoying, since ++# it makes $ac_aux_dir quite unusable in subdirectories: in the top ++# source directory, any form will work fine, but in subdirectories a ++# relative path needs to be adjusted first. + # +-# Check to make sure that the build environment is sane. ++# $ac_aux_dir/missing ++# fails when called from a subdirectory if $ac_aux_dir is relative ++# $top_srcdir/$ac_aux_dir/missing ++# fails if $ac_aux_dir is absolute, ++# fails when called from a subdirectory in a VPATH build with ++# a relative $ac_aux_dir + # ++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir ++# are both prefixed by $srcdir. In an in-source build this is usually ++# harmless because $srcdir is '.', but things will broke when you ++# start a VPATH build or use an absolute $srcdir. ++# ++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, ++# iff we strip the leading $srcdir from $ac_aux_dir. That would be: ++# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` ++# and then we would define $MISSING as ++# MISSING="\${SHELL} $am_aux_dir/missing" ++# This will work as long as MISSING is not called from configure, because ++# unfortunately $(top_srcdir) has no meaning in configure. ++# However there are other variables, like CC, which are often used in ++# configure, and could therefore not use this "fixed" $ac_aux_dir. ++# ++# Another solution, used here, is to always expand $ac_aux_dir to an ++# absolute PATH. The drawback is that using absolute paths prevent a ++# configured tree to be moved without reconfiguration. ++ ++AC_DEFUN([AM_AUX_DIR_EXPAND], ++[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl ++# Expand $ac_aux_dir to an absolute path. ++am_aux_dir=`cd "$ac_aux_dir" && pwd` ++]) + +-AC_DEFUN(AM_SANITY_CHECK, +-[AC_MSG_CHECKING([whether build environment is sane]) +-# Just in case +-sleep 1 +-echo timestamp > conftestfile +-# Do `set' in a subshell so we don't clobber the current shell's +-# arguments. Must try -L first in case configure is actually a +-# symlink; some systems play weird games with the mod time of symlinks +-# (eg FreeBSD returns the mod time of the symlink's containing +-# directory). +-if ( +- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` +- if test "[$]*" = "X"; then +- # -L didn't work. +- set X `ls -t $srcdir/configure conftestfile` +- fi +- if test "[$]*" != "X $srcdir/configure conftestfile" \ +- && test "[$]*" != "X conftestfile $srcdir/configure"; then +- +- # If neither matched, then we have a broken ls. This can happen +- # if, for instance, CONFIG_SHELL is bash and it inherits a +- # broken ls alias from the environment. This has actually +- # happened. Such a system could not be considered "sane". +- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +-alias in your environment]) +- fi +- +- test "[$]2" = conftestfile +- ) +-then +- # Ok. +- : ++# AM_CONDITIONAL -*- Autoconf -*- ++ ++# Copyright (C) 1997-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_CONDITIONAL(NAME, SHELL-CONDITION) ++# ------------------------------------- ++# Define a conditional. ++AC_DEFUN([AM_CONDITIONAL], ++[AC_PREREQ([2.52])dnl ++ m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], ++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl ++AC_SUBST([$1_TRUE])dnl ++AC_SUBST([$1_FALSE])dnl ++_AM_SUBST_NOTMAKE([$1_TRUE])dnl ++_AM_SUBST_NOTMAKE([$1_FALSE])dnl ++m4_define([_AM_COND_VALUE_$1], [$2])dnl ++if $2; then ++ $1_TRUE= ++ $1_FALSE='#' + else +- AC_MSG_ERROR([newly created file is older than distributed files! +-Check your system clock]) ++ $1_TRUE='#' ++ $1_FALSE= + fi +-rm -f conftest* +-AC_MSG_RESULT(yes)]) ++AC_CONFIG_COMMANDS_PRE( ++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then ++ AC_MSG_ERROR([[conditional "$1" was never defined. ++Usually this means the macro was only invoked conditionally.]]) ++fi])]) + +-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) +-dnl The program must properly implement --version. +-AC_DEFUN(AM_MISSING_PROG, +-[AC_MSG_CHECKING(for working $2) +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if ($2 --version) < /dev/null > /dev/null 2>&1; then +- $1=$2 +- AC_MSG_RESULT(found) ++# Copyright (C) 1999-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++ ++# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be ++# written in clear, in which case automake, when reading aclocal.m4, ++# will think it sees a *use*, and therefore will trigger all it's ++# C support machinery. Also note that it means that autoscan, seeing ++# CC etc. in the Makefile, will ask for an AC_PROG_CC use... ++ ++ ++# _AM_DEPENDENCIES(NAME) ++# ---------------------- ++# See how the compiler implements dependency checking. ++# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". ++# We try a few techniques and use that to set a single cache variable. ++# ++# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was ++# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular ++# dependency, and given that the user is not expected to run this macro, ++# just rely on AC_PROG_CC. ++AC_DEFUN([_AM_DEPENDENCIES], ++[AC_REQUIRE([AM_SET_DEPDIR])dnl ++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl ++AC_REQUIRE([AM_MAKE_INCLUDE])dnl ++AC_REQUIRE([AM_DEP_TRACK])dnl ++ ++m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], ++ [$1], [CXX], [depcc="$CXX" am_compiler_list=], ++ [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], ++ [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], ++ [$1], [UPC], [depcc="$UPC" am_compiler_list=], ++ [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], ++ [depcc="$$1" am_compiler_list=]) ++ ++AC_CACHE_CHECK([dependency style of $depcc], ++ [am_cv_$1_dependencies_compiler_type], ++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named 'D' -- because '-MD' means "put the output ++ # in D". ++ rm -rf conftest.dir ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_$1_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` ++ fi ++ am__universal=false ++ m4_case([$1], [CC], ++ [case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac], ++ [CXX], ++ [case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac]) ++ ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with ++ # Solaris 10 /bin/sh. ++ echo '/* dummy */' > sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ ++ # We check with '-c' and '-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle '-M -o', and we need to detect this. Also, some Intel ++ # versions had trouble with output in subdirs. ++ am__obj=sub/conftest.${OBJEXT-o} ++ am__minus_obj="-o $am__obj" ++ case $depmode in ++ gcc) ++ # This depmode causes a compiler race in universal mode. ++ test "$am__universal" = false || continue ++ ;; ++ nosideeffect) ++ # After this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested. ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ msvc7 | msvc7msys | msvisualcpp | msvcmsys) ++ # This compiler won't grok '-c -o', but also, the minuso test has ++ # not run yet. These depmodes are late enough in the game, and ++ # so weak that their functioning should not be impacted. ++ am__obj=conftest.${OBJEXT-o} ++ am__minus_obj= ++ ;; ++ none) break ;; ++ esac ++ if depmode=$depmode \ ++ source=sub/conftest.c object=$am__obj \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_$1_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done ++ ++ cd .. ++ rm -rf conftest.dir + else +- $1="$3/missing $2" +- AC_MSG_RESULT(missing) ++ am_cv_$1_dependencies_compiler_type=none + fi +-AC_SUBST($1)]) ++]) ++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) ++AM_CONDITIONAL([am__fastdep$1], [ ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ++]) ++ + +-# Like AC_CONFIG_HEADER, but automatically create stamp file. ++# AM_SET_DEPDIR ++# ------------- ++# Choose a directory name for dependency files. ++# This macro is AC_REQUIREd in _AM_DEPENDENCIES. ++AC_DEFUN([AM_SET_DEPDIR], ++[AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ++]) + +-AC_DEFUN(AM_CONFIG_HEADER, +-[AC_PREREQ([2.12]) +-AC_CONFIG_HEADER([$1]) +-dnl When config.status generates a header, we must update the stamp-h file. +-dnl This file resides in the same directory as the config header +-dnl that is generated. We must strip everything past the first ":", +-dnl and everything past the last "/". +-AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl +-ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, +-<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, +-<<am_indx=1 +-for am_file in <<$1>>; do +- case " <<$>>CONFIG_HEADERS " in +- *" <<$>>am_file "*<<)>> +- echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx +- ;; ++ ++# AM_DEP_TRACK ++# ------------ ++AC_DEFUN([AM_DEP_TRACK], ++[AC_ARG_ENABLE([dependency-tracking], [dnl ++AS_HELP_STRING( ++ [--enable-dependency-tracking], ++ [do not reject slow dependency extractors]) ++AS_HELP_STRING( ++ [--disable-dependency-tracking], ++ [speeds up one-time build])]) ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++ am__nodep='_no' ++fi ++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ++AC_SUBST([AMDEPBACKSLASH])dnl ++_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ++AC_SUBST([am__nodep])dnl ++_AM_SUBST_NOTMAKE([am__nodep])dnl ++]) ++ ++# Generate code to set up dependency tracking. -*- Autoconf -*- ++ ++# Copyright (C) 1999-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# _AM_OUTPUT_DEPENDENCY_COMMANDS ++# ------------------------------ ++AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], ++[{ ++ # Older Autoconf quotes --file arguments for eval, but not when files ++ # are listed without --file. Let's play safe and only enable the eval ++ # if we detect the quoting. ++ # TODO: see whether this extra hack can be removed once we start ++ # requiring Autoconf 2.70 or later. ++ AS_CASE([$CONFIG_FILES], ++ [*\'*], [eval set x "$CONFIG_FILES"], ++ [*], [set x $CONFIG_FILES]) ++ shift ++ # Used to flag and report bootstrapping failures. ++ am_rc=0 ++ for am_mf ++ do ++ # Strip MF so we end up with the name of the file. ++ am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile which includes ++ # dependency-tracking related rules and includes. ++ # Grep'ing the whole file directly is not great: AIX grep has a line ++ # limit of 2048, but all sed's we know have understand at least 4000. ++ sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ ++ || continue ++ am_dirpart=`AS_DIRNAME(["$am_mf"])` ++ am_filepart=`AS_BASENAME(["$am_mf"])` ++ AM_RUN_LOG([cd "$am_dirpart" \ ++ && sed -e '/# am--include-marker/d' "$am_filepart" \ ++ | $MAKE -f - am--depfiles]) || am_rc=$? ++ done ++ if test $am_rc -ne 0; then ++ AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments ++ for automatic dependency tracking. Try re-running configure with the ++ '--disable-dependency-tracking' option to at least be able to build ++ the package (albeit without support for automatic dependency tracking).]) ++ fi ++ AS_UNSET([am_dirpart]) ++ AS_UNSET([am_filepart]) ++ AS_UNSET([am_mf]) ++ AS_UNSET([am_rc]) ++ rm -f conftest-deps.mk ++} ++])# _AM_OUTPUT_DEPENDENCY_COMMANDS ++ ++ ++# AM_OUTPUT_DEPENDENCY_COMMANDS ++# ----------------------------- ++# This macro should only be invoked once -- use via AC_REQUIRE. ++# ++# This code is only required when automatic dependency tracking is enabled. ++# This creates each '.Po' and '.Plo' makefile fragment that we'll need in ++# order to bootstrap the dependency handling code. ++AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], ++[AC_CONFIG_COMMANDS([depfiles], ++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], ++ [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])]) ++ ++# Do all the work for Automake. -*- Autoconf -*- ++ ++# Copyright (C) 1996-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# This macro actually does too much. Some checks are only needed if ++# your package does certain things. But this isn't really a big deal. ++ ++dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. ++m4_define([AC_PROG_CC], ++m4_defn([AC_PROG_CC]) ++[_AM_PROG_CC_C_O ++]) ++ ++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) ++# AM_INIT_AUTOMAKE([OPTIONS]) ++# ----------------------------------------------- ++# The call with PACKAGE and VERSION arguments is the old style ++# call (pre autoconf-2.50), which is being phased out. PACKAGE ++# and VERSION should now be passed to AC_INIT and removed from ++# the call to AM_INIT_AUTOMAKE. ++# We support both call styles for the transition. After ++# the next Automake release, Autoconf can make the AC_INIT ++# arguments mandatory, and then we can depend on a new Autoconf ++# release and drop the old call support. ++AC_DEFUN([AM_INIT_AUTOMAKE], ++[AC_PREREQ([2.65])dnl ++dnl Autoconf wants to disallow AM_ names. We explicitly allow ++dnl the ones we care about. ++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl ++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl ++AC_REQUIRE([AC_PROG_INSTALL])dnl ++if test "`cd $srcdir && pwd`" != "`pwd`"; then ++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ++ # is not polluted with repeated "-I." ++ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl ++ # test to see if srcdir already configured ++ if test -f $srcdir/config.status; then ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) ++ fi ++fi ++ ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi ++fi ++AC_SUBST([CYGPATH_W]) ++ ++# Define the identity of the package. ++dnl Distinguish between old-style and new-style calls. ++m4_ifval([$2], ++[AC_DIAGNOSE([obsolete], ++ [$0: two- and three-arguments forms are deprecated.]) ++m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl ++ AC_SUBST([PACKAGE], [$1])dnl ++ AC_SUBST([VERSION], [$2])], ++[_AM_SET_OPTIONS([$1])dnl ++dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. ++m4_if( ++ m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), ++ [ok:ok],, ++ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl ++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl ++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl ++ ++_AM_IF_OPTION([no-define],, ++[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) ++ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl ++ ++# Some tools Automake needs. ++AC_REQUIRE([AM_SANITY_CHECK])dnl ++AC_REQUIRE([AC_ARG_PROGRAM])dnl ++AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) ++AM_MISSING_PROG([AUTOCONF], [autoconf]) ++AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) ++AM_MISSING_PROG([AUTOHEADER], [autoheader]) ++AM_MISSING_PROG([MAKEINFO], [makeinfo]) ++AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ++AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl ++AC_REQUIRE([AC_PROG_MKDIR_P])dnl ++# For better backward compatibility. To be removed once Automake 1.9.x ++# dies out for good. For more background, see: ++# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html> ++# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html> ++AC_SUBST([mkdir_p], ['$(MKDIR_P)']) ++# We need awk for the "check" target (and possibly the TAP driver). The ++# system "awk" is bad on some platforms. ++AC_REQUIRE([AC_PROG_AWK])dnl ++AC_REQUIRE([AC_PROG_MAKE_SET])dnl ++AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], ++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) ++_AM_IF_OPTION([no-dependencies],, ++[AC_PROVIDE_IFELSE([AC_PROG_CC], ++ [_AM_DEPENDENCIES([CC])], ++ [m4_define([AC_PROG_CC], ++ m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [_AM_DEPENDENCIES([CXX])], ++ [m4_define([AC_PROG_CXX], ++ m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_OBJC], ++ [_AM_DEPENDENCIES([OBJC])], ++ [m4_define([AC_PROG_OBJC], ++ m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], ++ [_AM_DEPENDENCIES([OBJCXX])], ++ [m4_define([AC_PROG_OBJCXX], ++ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl ++]) ++AC_REQUIRE([AM_SILENT_RULES])dnl ++dnl The testsuite driver may need to know about EXEEXT, so add the ++dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This ++dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. ++AC_CONFIG_COMMANDS_PRE(dnl ++[m4_provide_if([_AM_COMPILER_EXEEXT], ++ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ++ ++# POSIX will say in a future version that running "rm -f" with no argument ++# is OK; and we want to be able to make that assumption in our Makefile ++# recipes. So use an aggressive probe to check that the usage we want is ++# actually supported "in the wild" to an acceptable degree. ++# See automake bug#10828. ++# To make any issue more visible, cause the running configure to be aborted ++# by default if the 'rm' program in use doesn't match our expectations; the ++# user can still override this though. ++if rm -f && rm -fr && rm -rf; then : OK; else ++ cat >&2 <<'END' ++Oops! ++ ++Your 'rm' program seems unable to run without file operands specified ++on the command line, even when the '-f' option is present. This is contrary ++to the behaviour of most rm programs out there, and not conforming with ++the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542> ++ ++Please tell bug-automake@gnu.org about your system, including the value ++of your $PATH and any error possibly output before this message. This ++can help us improve future automake versions. ++ ++END ++ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then ++ echo 'Configuration will proceed anyway, since you have set the' >&2 ++ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 ++ echo >&2 ++ else ++ cat >&2 <<'END' ++Aborting the configuration process, to ensure you take notice of the issue. ++ ++You can download and install GNU coreutils to get an 'rm' implementation ++that behaves properly: <https://www.gnu.org/software/coreutils/>. ++ ++If you want to complete the configuration process using your problematic ++'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM ++to "yes", and re-run configure. ++ ++END ++ AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) ++ fi ++fi ++dnl The trailing newline in this macro's definition is deliberate, for ++dnl backward compatibility and to allow trailing 'dnl'-style comments ++dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. ++]) ++ ++dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not ++dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further ++dnl mangled by Autoconf and run in a shell conditional statement. ++m4_define([_AC_COMPILER_EXEEXT], ++m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) ++ ++# When config.status generates a header, we must update the stamp-h file. ++# This file resides in the same directory as the config header ++# that is generated. The stamp files are numbered to have different names. ++ ++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the ++# loop where config.status creates the headers, so we can generate ++# our stamp files there. ++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], ++[# Compute $1's index in $config_headers. ++_am_arg=$1 ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $_am_arg | $_am_arg:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +- am_indx=`expr "<<$>>am_indx" + 1` +-done<<>>dnl>>) +-changequote([,]))]) ++done ++echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + ++# Copyright (C) 2001-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_PROG_INSTALL_SH ++# ------------------ ++# Define $install_sh. ++AC_DEFUN([AM_PROG_INSTALL_SH], ++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++if test x"${install_sh+set}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; ++ *) ++ install_sh="\${SHELL} $am_aux_dir/install-sh" ++ esac ++fi ++AC_SUBST([install_sh])]) + +-# serial 1 +- +-AC_DEFUN(AM_C_PROTOTYPES, +-[AC_REQUIRE([AM_PROG_CC_STDC]) +-AC_REQUIRE([AC_PROG_CPP]) +-AC_MSG_CHECKING([for function prototypes]) +-if test "$am_cv_prog_cc_stdc" != no; then +- AC_MSG_RESULT(yes) +- AC_DEFINE(PROTOTYPES) +- U= ANSI2KNR= ++# Copyright (C) 2003-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# Check whether the underlying file-system supports filenames ++# with a leading dot. For instance MS-DOS doesn't. ++AC_DEFUN([AM_SET_LEADING_DOT], ++[rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. + else +- AC_MSG_RESULT(no) +- U=_ ANSI2KNR=./ansi2knr +- # Ensure some checks needed by ansi2knr itself. +- AC_HEADER_STDC +- AC_CHECK_HEADERS(string.h) +-fi +-AC_SUBST(U)dnl +-AC_SUBST(ANSI2KNR)dnl +-]) +- +- +-# serial 1 +- +-# @defmac AC_PROG_CC_STDC +-# @maindex PROG_CC_STDC +-# @ovindex CC +-# If the C compiler in not in ANSI C mode by default, try to add an option +-# to output variable @code{CC} to make it so. This macro tries various +-# options that select ANSI C on some system or another. It considers the +-# compiler to be in ANSI C mode if it handles function prototypes correctly. +-# +-# If you use this macro, you should check after calling it whether the C +-# compiler has been set to accept ANSI C; if not, the shell variable +-# @code{am_cv_prog_cc_stdc} is set to @samp{no}. If you wrote your source +-# code in ANSI C, you can make an un-ANSIfied copy of it by using the +-# program @code{ansi2knr}, which comes with Ghostscript. +-# @end defmac +- +-AC_DEFUN(AM_PROG_CC_STDC, +-[AC_REQUIRE([AC_PROG_CC]) +-AC_BEFORE([$0], [AC_C_INLINE]) +-AC_BEFORE([$0], [AC_C_CONST]) +-dnl Force this before AC_PROG_CPP. Some cpp's, eg on HPUX, require +-dnl a magic option to avoid problems with ANSI preprocessor commands +-dnl like #elif. +-dnl FIXME: can't do this because then AC_AIX won't work due to a +-dnl circular dependency. +-dnl AC_BEFORE([$0], [AC_PROG_CPP]) +-AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C) +-AC_CACHE_VAL(am_cv_prog_cc_stdc, +-[am_cv_prog_cc_stdc=no +-ac_save_CC="$CC" +-# Don't try gcc -ansi; that turns off useful extensions and +-# breaks some systems' header files. +-# AIX -qlanglvl=ansi +-# Ultrix and OSF/1 -std1 +-# HP-UX -Aa -D_HPUX_SOURCE +-# SVR4 -Xc -D__EXTENSIONS__ +-for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +-do +- CC="$ac_save_CC $ac_arg" +- AC_TRY_COMPILE( +-[#include <stdarg.h> +-#include <stdio.h> +-#include <sys/types.h> +-#include <sys/stat.h> +-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +-struct buf { int x; }; +-FILE * (*rcsopen) (struct buf *, struct stat *, int); +-static char *e (p, i) +- char **p; +- int i; +-{ +- return p[i]; +-} +-static char *f (char * (*g) (char **, int), char **p, ...) +-{ +- char *s; +- va_list v; +- va_start (v,p); +- s = g (p, va_arg (v,int)); +- va_end (v); +- return s; +-} +-int test (int i, double x); +-struct s1 {int (*f) (int a);}; +-struct s2 {int (*f) (double a);}; +-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +-int argc; +-char **argv; +-], [ +-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; +-], +-[am_cv_prog_cc_stdc="$ac_arg"; break]) ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++AC_SUBST([am__leading_dot])]) ++ ++# Check to see how 'make' treats includes. -*- Autoconf -*- ++ ++# Copyright (C) 2001-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_MAKE_INCLUDE() ++# ----------------- ++# Check whether make has an 'include' directive that can support all ++# the idioms we need for our automatic dependency tracking code. ++AC_DEFUN([AM_MAKE_INCLUDE], ++[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive]) ++cat > confinc.mk << 'END' ++am__doit: ++ @echo this is the am__doit target >confinc.out ++.PHONY: am__doit ++END ++am__include="#" ++am__quote= ++# BSD make does it like this. ++echo '.include "confinc.mk" # ignored' > confmf.BSD ++# Other make implementations (GNU, Solaris 10, AIX) do it like this. ++echo 'include confinc.mk # ignored' > confmf.GNU ++_am_result=no ++for s in GNU BSD; do ++ AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out]) ++ AS_CASE([$?:`cat confinc.out 2>/dev/null`], ++ ['0:this is the am__doit target'], ++ [AS_CASE([$s], ++ [BSD], [am__include='.include' am__quote='"'], ++ [am__include='include' am__quote=''])]) ++ if test "$am__include" != "#"; then ++ _am_result="yes ($s style)" ++ break ++ fi + done +-CC="$ac_save_CC" +-]) +-if test -z "$am_cv_prog_cc_stdc"; then +- AC_MSG_RESULT([none needed]) ++rm -f confinc.* confmf.* ++AC_MSG_RESULT([${_am_result}]) ++AC_SUBST([am__include])]) ++AC_SUBST([am__quote])]) ++ ++# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- ++ ++# Copyright (C) 1997-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_MISSING_PROG(NAME, PROGRAM) ++# ------------------------------ ++AC_DEFUN([AM_MISSING_PROG], ++[AC_REQUIRE([AM_MISSING_HAS_RUN]) ++$1=${$1-"${am_missing_run}$2"} ++AC_SUBST($1)]) ++ ++# AM_MISSING_HAS_RUN ++# ------------------ ++# Define MISSING if not defined so far and test if it is modern enough. ++# If it is, set am_missing_run to use it, otherwise, to nothing. ++AC_DEFUN([AM_MISSING_HAS_RUN], ++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++AC_REQUIRE_AUX_FILE([missing])dnl ++if test x"${MISSING+set}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; ++ *) ++ MISSING="\${SHELL} $am_aux_dir/missing" ;; ++ esac ++fi ++# Use eval to expand $SHELL ++if eval "$MISSING --is-lightweight"; then ++ am_missing_run="$MISSING " + else +- AC_MSG_RESULT($am_cv_prog_cc_stdc) ++ am_missing_run= ++ AC_MSG_WARN(['missing' script is too old or missing]) + fi +-case "x$am_cv_prog_cc_stdc" in +- x|xno) ;; +- *) CC="$CC $am_cv_prog_cc_stdc" ;; +-esac + ]) + +-# Macro to add for using GNU gettext. +-# Ulrich Drepper <drepper@cygnus.com>, 1995. ++# -*- Autoconf -*- ++# Obsolete and "removed" macros, that must however still report explicit ++# error messages when used, to smooth transition. + # +-# This file file be copied and used freely without restrictions. It can +-# be used in projects which are not available under the GNU Public License +-# but which still want to provide support for the GNU gettext functionality. +-# Please note that the actual code is *not* freely available. +- +-# serial 3 +- +-AC_DEFUN(AM_WITH_NLS, +- [AC_MSG_CHECKING([whether NLS is requested]) +- dnl Default is enabled NLS +- AC_ARG_ENABLE(nls, +- [ --disable-nls do not use Native Language Support], +- USE_NLS=$enableval, USE_NLS=yes) +- AC_MSG_RESULT($USE_NLS) +- AC_SUBST(USE_NLS) +- +- USE_INCLUDED_LIBINTL=no +- +- dnl If we use NLS figure out what method +- if test "$USE_NLS" = "yes"; then +- AC_DEFINE(ENABLE_NLS) +- AC_MSG_CHECKING([whether included gettext is requested]) +- AC_ARG_WITH(included-gettext, +- [ --with-included-gettext use the GNU gettext library included here], +- nls_cv_force_use_gnu_gettext=$withval, +- nls_cv_force_use_gnu_gettext=no) +- AC_MSG_RESULT($nls_cv_force_use_gnu_gettext) +- +- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" +- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then +- dnl User does not insist on using GNU NLS library. Figure out what +- dnl to use. If gettext or catgets are available (in this order) we +- dnl use this. Else we have to fall back to GNU NLS library. +- dnl catgets is only used if permitted by option --with-catgets. +- nls_cv_header_intl= +- nls_cv_header_libgt= +- CATOBJEXT=NONE +- +- AC_CHECK_HEADER(libintl.h, +- [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc, +- [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")], +- gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)]) +- +- if test "$gt_cv_func_gettext_libc" != "yes"; then +- AC_CHECK_LIB(intl, bindtextdomain, +- [AC_CACHE_CHECK([for gettext in libintl], +- gt_cv_func_gettext_libintl, +- [AC_TRY_LINK([], [return (int) gettext ("")], +- gt_cv_func_gettext_libintl=yes, +- gt_cv_func_gettext_libintl=no)])]) +- fi +- +- if test "$gt_cv_func_gettext_libc" = "yes" \ +- || test "$gt_cv_func_gettext_libintl" = "yes"; then +- AC_DEFINE(HAVE_GETTEXT) +- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, +- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl +- if test "$MSGFMT" != "no"; then +- AC_CHECK_FUNCS(dcgettext) +- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) +- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, +- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) +- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; +- return _nl_msg_cat_cntr], +- [CATOBJEXT=.gmo +- DATADIRNAME=share], +- [CATOBJEXT=.mo +- DATADIRNAME=lib]) +- INSTOBJEXT=.mo +- fi +- fi +- ]) +- +- if test "$CATOBJEXT" = "NONE"; then +- AC_MSG_CHECKING([whether catgets can be used]) +- AC_ARG_WITH(catgets, +- [ --with-catgets use catgets functions if available], +- nls_cv_use_catgets=$withval, nls_cv_use_catgets=no) +- AC_MSG_RESULT($nls_cv_use_catgets) +- +- if test "$nls_cv_use_catgets" = "yes"; then +- dnl No gettext in C library. Try catgets next. +- AC_CHECK_LIB(i, main) +- AC_CHECK_FUNC(catgets, +- [AC_DEFINE(HAVE_CATGETS) +- INTLOBJS="\$(CATOBJS)" +- AC_PATH_PROG(GENCAT, gencat, no)dnl +- if test "$GENCAT" != "no"; then +- AC_PATH_PROG(GMSGFMT, gmsgfmt, no) +- if test "$GMSGFMT" = "no"; then +- AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt, +- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no) +- fi +- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, +- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) +- USE_INCLUDED_LIBINTL=yes +- CATOBJEXT=.cat +- INSTOBJEXT=.cat +- DATADIRNAME=lib +- INTLDEPS='$(top_builddir)/intl/libintl.a' +- INTLLIBS=$INTLDEPS +- LIBS=`echo $LIBS | sed -e 's/-lintl//'` +- nls_cv_header_intl=intl/libintl.h +- nls_cv_header_libgt=intl/libgettext.h +- fi]) +- fi +- fi +- +- if test "$CATOBJEXT" = "NONE"; then +- dnl Neither gettext nor catgets in included in the C library. +- dnl Fall back on GNU gettext library. +- nls_cv_use_gnu_gettext=yes +- fi +- fi ++# Copyright (C) 1996-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++AC_DEFUN([AM_CONFIG_HEADER], ++[AC_DIAGNOSE([obsolete], ++['$0': this macro is obsolete. ++You should use the 'AC][_CONFIG_HEADERS' macro instead.])dnl ++AC_CONFIG_HEADERS($@)]) ++ ++AC_DEFUN([AM_PROG_CC_STDC], ++[AC_PROG_CC ++am_cv_prog_cc_stdc=$ac_cv_prog_cc_stdc ++AC_DIAGNOSE([obsolete], ++['$0': this macro is obsolete. ++You should simply use the 'AC][_PROG_CC' macro instead. ++Also, your code should no longer depend upon 'am_cv_prog_cc_stdc', ++but upon 'ac_cv_prog_cc_stdc'.])]) ++ ++AC_DEFUN([AM_C_PROTOTYPES], ++ [AC_FATAL([automatic de-ANSI-fication support has been removed])]) ++AU_DEFUN([fp_C_PROTOTYPES], [AM_C_PROTOTYPES]) + +- if test "$nls_cv_use_gnu_gettext" = "yes"; then +- dnl Mark actions used to generate GNU NLS library. +- INTLOBJS="\$(GETTOBJS)" +- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, +- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt) +- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) +- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, +- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) +- AC_SUBST(MSGFMT) +- USE_INCLUDED_LIBINTL=yes +- CATOBJEXT=.gmo +- INSTOBJEXT=.mo +- DATADIRNAME=share +- INTLDEPS='$(top_builddir)/intl/libintl.a' +- INTLLIBS=$INTLDEPS +- LIBS=`echo $LIBS | sed -e 's/-lintl//'` +- nls_cv_header_intl=intl/libintl.h +- nls_cv_header_libgt=intl/libgettext.h +- fi ++# Helper functions for option handling. -*- Autoconf -*- + +- dnl Test whether we really found GNU xgettext. +- if test "$XGETTEXT" != ":"; then +- dnl If it is no GNU xgettext we define it as : so that the +- dnl Makefiles still can work. +- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then +- : ; +- else +- AC_MSG_RESULT( +- [found xgettext programs is not GNU xgettext; ignore it]) +- XGETTEXT=":" +- fi +- fi ++# Copyright (C) 2001-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# _AM_MANGLE_OPTION(NAME) ++# ----------------------- ++AC_DEFUN([_AM_MANGLE_OPTION], ++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) ++ ++# _AM_SET_OPTION(NAME) ++# -------------------- ++# Set option NAME. Presently that only means defining a flag for this option. ++AC_DEFUN([_AM_SET_OPTION], ++[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) ++ ++# _AM_SET_OPTIONS(OPTIONS) ++# ------------------------ ++# OPTIONS is a space-separated list of Automake options. ++AC_DEFUN([_AM_SET_OPTIONS], ++[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) ++ ++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) ++# ------------------------------------------- ++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. ++AC_DEFUN([_AM_IF_OPTION], ++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +- # We need to process the po/ directory. +- POSUB=po ++# Copyright (C) 1999-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# _AM_PROG_CC_C_O ++# --------------- ++# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC ++# to automatically call this. ++AC_DEFUN([_AM_PROG_CC_C_O], ++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++AC_REQUIRE_AUX_FILE([compile])dnl ++AC_LANG_PUSH([C])dnl ++AC_CACHE_CHECK( ++ [whether $CC understands -c and -o together], ++ [am_cv_prog_cc_c_o], ++ [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) ++ # Make sure it works both with $CC and with simple cc. ++ # Following AC_PROG_CC_C_O, we do the test twice because some ++ # compilers refuse to overwrite an existing .o file with -o, ++ # though they will create one. ++ am_cv_prog_cc_c_o=yes ++ for am_i in 1 2; do ++ if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ ++ && test -f conftest2.$ac_objext; then ++ : OK + else +- DATADIRNAME=share +- nls_cv_header_intl=intl/libintl.h +- nls_cv_header_libgt=intl/libgettext.h ++ am_cv_prog_cc_c_o=no ++ break + fi ++ done ++ rm -f core conftest* ++ unset am_i]) ++if test "$am_cv_prog_cc_c_o" != yes; then ++ # Losing compiler, so override with the script. ++ # FIXME: It is wrong to rewrite CC. ++ # But if we don't then we get into trouble of one sort or another. ++ # A longer-term fix would be to have automake use am__CC in this case, ++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" ++ CC="$am_aux_dir/compile $CC" ++fi ++AC_LANG_POP([C])]) + +- # If this is used in GNU gettext we have to set USE_NLS to `yes' +- # because some of the sources are only built for this goal. +- if test "$PACKAGE" = gettext; then +- USE_NLS=yes +- USE_INCLUDED_LIBINTL=yes +- fi ++# For backward compatibility. ++AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) + +- dnl These rules are solely for the distribution goal. While doing this +- dnl we only have to keep exactly one list of the available catalogs +- dnl in configure.in. +- for lang in $ALL_LINGUAS; do +- GMOFILES="$GMOFILES $lang.gmo" +- POFILES="$POFILES $lang.po" +- done ++# Copyright (C) 2001-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_RUN_LOG(COMMAND) ++# ------------------- ++# Run COMMAND, save the exit status in ac_status, and log it. ++# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) ++AC_DEFUN([AM_RUN_LOG], ++[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD ++ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ (exit $ac_status); }]) + +- dnl Make all variables we use known to autoconf. +- AC_SUBST(USE_INCLUDED_LIBINTL) +- AC_SUBST(CATALOGS) +- AC_SUBST(CATOBJEXT) +- AC_SUBST(DATADIRNAME) +- AC_SUBST(GMOFILES) +- AC_SUBST(INSTOBJEXT) +- AC_SUBST(INTLDEPS) +- AC_SUBST(INTLLIBS) +- AC_SUBST(INTLOBJS) +- AC_SUBST(POFILES) +- AC_SUBST(POSUB) +- ]) +- +-AC_DEFUN(AM_GNU_GETTEXT, +- [AC_REQUIRE([AC_PROG_MAKE_SET])dnl +- AC_REQUIRE([AC_PROG_CC])dnl +- AC_REQUIRE([AC_PROG_RANLIB])dnl +- AC_REQUIRE([AC_ISC_POSIX])dnl +- AC_REQUIRE([AC_HEADER_STDC])dnl +- AC_REQUIRE([AC_C_CONST])dnl +- AC_REQUIRE([AC_C_INLINE])dnl +- AC_REQUIRE([AC_TYPE_OFF_T])dnl +- AC_REQUIRE([AC_TYPE_SIZE_T])dnl +- AC_REQUIRE([AC_FUNC_ALLOCA])dnl +- AC_REQUIRE([AC_FUNC_MMAP])dnl +- +- AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \ +-unistd.h values.h sys/param.h]) +- AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \ +-__argz_count __argz_stringify __argz_next]) +- +- if test "${ac_cv_func_stpcpy+set}" != "set"; then +- AC_CHECK_FUNCS(stpcpy) +- fi +- if test "${ac_cv_func_stpcpy}" = "yes"; then +- AC_DEFINE(HAVE_STPCPY) +- fi +- +- AM_LC_MESSAGES +- AM_WITH_NLS +- +- if test "x$CATOBJEXT" != "x"; then +- if test "x$ALL_LINGUAS" = "x"; then +- LINGUAS= +- else +- AC_MSG_CHECKING(for catalogs to be installed) +- NEW_LINGUAS= +- for lang in ${LINGUAS=$ALL_LINGUAS}; do +- case "$ALL_LINGUAS" in +- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; +- esac +- done +- LINGUAS=$NEW_LINGUAS +- AC_MSG_RESULT($LINGUAS) +- fi +- +- dnl Construct list of names of catalog files to be constructed. +- if test -n "$LINGUAS"; then +- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done +- fi +- fi +- +- dnl The reference to <locale.h> in the installed <libintl.h> file +- dnl must be resolved because we cannot expect the users of this +- dnl to define HAVE_LOCALE_H. +- if test $ac_cv_header_locale_h = yes; then +- INCLUDE_LOCALE_H="#include <locale.h>" +- else +- INCLUDE_LOCALE_H="\ +-/* The system does not provide the header <locale.h>. Take care yourself. */" +- fi +- AC_SUBST(INCLUDE_LOCALE_H) +- +- dnl Determine which catalog format we have (if any is needed) +- dnl For now we know about two different formats: +- dnl Linux libc-5 and the normal X/Open format +- test -d intl || mkdir intl +- if test "$CATOBJEXT" = ".cat"; then +- AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen) +- +- dnl Transform the SED scripts while copying because some dumb SEDs +- dnl cannot handle comments. +- sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed +- fi +- dnl po2tbl.sed is always needed. +- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \ +- $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed +- +- dnl In the intl/Makefile.in we have a special dependency which makes +- dnl only sense for gettext. We comment this out for non-gettext +- dnl packages. +- if test "$PACKAGE" = "gettext"; then +- GT_NO="#NO#" +- GT_YES= +- else +- GT_NO= +- GT_YES="#YES#" +- fi +- AC_SUBST(GT_NO) +- AC_SUBST(GT_YES) +- +- dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly +- dnl find the mkinstalldirs script in another subdir but ($top_srcdir). +- dnl Try to locate is. +- MKINSTALLDIRS= +- if test -n "$ac_aux_dir"; then +- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" +- fi +- if test -z "$MKINSTALLDIRS"; then +- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" +- fi +- AC_SUBST(MKINSTALLDIRS) +- +- dnl *** For now the libtool support in intl/Makefile is not for real. +- l= +- AC_SUBST(l) +- +- dnl Generate list of files to be processed by xgettext which will +- dnl be included in po/Makefile. +- test -d po || mkdir po +- if test "x$srcdir" != "x."; then +- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then +- posrcprefix="$srcdir/" +- else +- posrcprefix="../$srcdir/" +- fi +- else +- posrcprefix="../" +- fi +- rm -f po/POTFILES +- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ +- < $srcdir/po/POTFILES.in > po/POTFILES +- ]) +- +-# Search path for a program which passes the given test. +-# Ulrich Drepper <drepper@cygnus.com>, 1996. +-# +-# This file file be copied and used freely without restrictions. It can +-# be used in projects which are not available under the GNU Public License +-# but which still want to provide support for the GNU gettext functionality. +-# Please note that the actual code is *not* freely available. +- +-# serial 1 +- +-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, +-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +-AC_DEFUN(AM_PATH_PROG_WITH_TEST, +-[# Extract the first word of "$2", so it can be a program name with args. +-set dummy $2; ac_word=[$]2 +-AC_MSG_CHECKING([for $ac_word]) +-AC_CACHE_VAL(ac_cv_path_$1, +-[case "[$]$1" in +- /*) +- ac_cv_path_$1="[$]$1" # Let the user override the test with a path. +- ;; +- *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in ifelse([$5], , $PATH, [$5]); do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if [$3]; then +- ac_cv_path_$1="$ac_dir/$ac_word" +- break +- fi +- fi +- done +- IFS="$ac_save_ifs" +-dnl If no 4th arg is given, leave the cache variable unset, +-dnl so AC_PATH_PROGS will keep looking. +-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +-])dnl +- ;; +-esac])dnl +-$1="$ac_cv_path_$1" +-if test -n "[$]$1"; then +- AC_MSG_RESULT([$]$1) ++# Check to make sure that the build environment is sane. -*- Autoconf -*- ++ ++# Copyright (C) 1996-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_SANITY_CHECK ++# --------------- ++AC_DEFUN([AM_SANITY_CHECK], ++[AC_MSG_CHECKING([whether build environment is sane]) ++# Reject unsafe characters in $srcdir or the absolute working directory ++# name. Accept space and tab only in the latter. ++am_lf=' ++' ++case `pwd` in ++ *[[\\\"\#\$\&\'\`$am_lf]]*) ++ AC_MSG_ERROR([unsafe absolute working directory name]);; ++esac ++case $srcdir in ++ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) ++ AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; ++esac ++ ++AC_MSG_RESULT([yes]) ++]) ++ ++# Copyright (C) 2009-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_SILENT_RULES([DEFAULT]) ++# -------------------------- ++# Enable less verbose build rules; with the default set to DEFAULT ++# ("yes" being less verbose, "no" or empty being verbose). ++AC_DEFUN([AM_SILENT_RULES], ++[AC_ARG_ENABLE([silent-rules], [dnl ++AS_HELP_STRING( ++ [--enable-silent-rules], ++ [less verbose build output (undo: "make V=1")]) ++AS_HELP_STRING( ++ [--disable-silent-rules], ++ [verbose build output (undo: "make V=0")])dnl ++]) ++case $enable_silent_rules in @%:@ ((( ++ yes) AM_DEFAULT_VERBOSITY=0;; ++ no) AM_DEFAULT_VERBOSITY=1;; ++ *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; ++esac ++dnl ++dnl A few 'make' implementations (e.g., NonStop OS and NextStep) ++dnl do not support nested variable expansions. ++dnl See automake bug#9928 and bug#10237. ++am_make=${MAKE-make} ++AC_CACHE_CHECK([whether $am_make supports nested variables], ++ [am_cv_make_support_nested_variables], ++ [if AS_ECHO([['TRUE=$(BAR$(V)) ++BAR0=false ++BAR1=true ++V=1 ++am__doit: ++ @$(TRUE) ++.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then ++ am_cv_make_support_nested_variables=yes ++else ++ am_cv_make_support_nested_variables=no ++fi]) ++if test $am_cv_make_support_nested_variables = yes; then ++ dnl Using '$V' instead of '$(V)' breaks IRIX make. ++ AM_V='$(V)' ++ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' + else +- AC_MSG_RESULT(no) ++ AM_V=$AM_DEFAULT_VERBOSITY ++ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY + fi +-AC_SUBST($1)dnl ++AC_SUBST([AM_V])dnl ++AM_SUBST_NOTMAKE([AM_V])dnl ++AC_SUBST([AM_DEFAULT_V])dnl ++AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl ++AC_SUBST([AM_DEFAULT_VERBOSITY])dnl ++AM_BACKSLASH='\' ++AC_SUBST([AM_BACKSLASH])dnl ++_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl + ]) + +-# Check whether LC_MESSAGES is available in <locale.h>. +-# Ulrich Drepper <drepper@cygnus.com>, 1995. ++# Copyright (C) 2001-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_PROG_INSTALL_STRIP ++# --------------------- ++# One issue with vendor 'install' (even GNU) is that you can't ++# specify the program used to strip binaries. This is especially ++# annoying in cross-compiling environments, where the build's strip ++# is unlikely to handle the host's binaries. ++# Fortunately install-sh will honor a STRIPPROG variable, so we ++# always use install-sh in "make install-strip", and initialize ++# STRIPPROG with the value of the STRIP variable (set by the user). ++AC_DEFUN([AM_PROG_INSTALL_STRIP], ++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ++# Installed binaries are usually stripped using 'strip' when the user ++# run "make install-strip". However 'strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the 'STRIP' environment variable to overrule this program. ++dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. ++if test "$cross_compiling" != no; then ++ AC_CHECK_TOOL([STRIP], [strip], :) ++fi ++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" ++AC_SUBST([INSTALL_STRIP_PROGRAM])]) ++ ++# Copyright (C) 2006-2018 Free Software Foundation, Inc. + # +-# This file file be copied and used freely without restrictions. It can +-# be used in projects which are not available under the GNU Public License +-# but which still want to provide support for the GNU gettext functionality. +-# Please note that the actual code is *not* freely available. ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# _AM_SUBST_NOTMAKE(VARIABLE) ++# --------------------------- ++# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. ++# This macro is traced by Automake. ++AC_DEFUN([_AM_SUBST_NOTMAKE]) ++ ++# AM_SUBST_NOTMAKE(VARIABLE) ++# -------------------------- ++# Public sister of _AM_SUBST_NOTMAKE. ++AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +-# serial 1 ++# Check how to create a tarball. -*- Autoconf -*- + +-AC_DEFUN(AM_LC_MESSAGES, +- [if test $ac_cv_header_locale_h = yes; then +- AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, +- [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES], +- am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) +- if test $am_cv_val_LC_MESSAGES = yes; then +- AC_DEFINE(HAVE_LC_MESSAGES) ++# Copyright (C) 2004-2018 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# _AM_PROG_TAR(FORMAT) ++# -------------------- ++# Check how to create a tarball in format FORMAT. ++# FORMAT should be one of 'v7', 'ustar', or 'pax'. ++# ++# Substitute a variable $(am__tar) that is a command ++# writing to stdout a FORMAT-tarball containing the directory ++# $tardir. ++# tardir=directory && $(am__tar) > result.tar ++# ++# Substitute a variable $(am__untar) that extract such ++# a tarball read from stdin. ++# $(am__untar) < result.tar ++# ++AC_DEFUN([_AM_PROG_TAR], ++[# Always define AMTAR for backward compatibility. Yes, it's still used ++# in the wild :-( We should find a proper way to deprecate it ... ++AC_SUBST([AMTAR], ['$${TAR-tar}']) ++ ++# We'll loop over all known methods to create a tar archive until one works. ++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' ++ ++m4_if([$1], [v7], ++ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], ++ ++ [m4_case([$1], ++ [ustar], ++ [# The POSIX 1988 'ustar' format is defined with fixed-size fields. ++ # There is notably a 21 bits limit for the UID and the GID. In fact, ++ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 ++ # and bug#13588). ++ am_max_uid=2097151 # 2^21 - 1 ++ am_max_gid=$am_max_uid ++ # The $UID and $GID variables are not portable, so we need to resort ++ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls ++ # below are definitely unexpected, so allow the users to see them ++ # (that is, avoid stderr redirection). ++ am_uid=`id -u || echo unknown` ++ am_gid=`id -g || echo unknown` ++ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) ++ if test $am_uid -le $am_max_uid; then ++ AC_MSG_RESULT([yes]) ++ else ++ AC_MSG_RESULT([no]) ++ _am_tools=none ++ fi ++ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) ++ if test $am_gid -le $am_max_gid; then ++ AC_MSG_RESULT([yes]) ++ else ++ AC_MSG_RESULT([no]) ++ _am_tools=none ++ fi], ++ ++ [pax], ++ [], ++ ++ [m4_fatal([Unknown tar format])]) ++ ++ AC_MSG_CHECKING([how to create a $1 tar archive]) ++ ++ # Go ahead even if we have the value already cached. We do so because we ++ # need to set the values for the 'am__tar' and 'am__untar' variables. ++ _am_tools=${am_cv_prog_tar_$1-$_am_tools} ++ ++ for _am_tool in $_am_tools; do ++ case $_am_tool in ++ gnutar) ++ for _am_tar in tar gnutar gtar; do ++ AM_RUN_LOG([$_am_tar --version]) && break ++ done ++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' ++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' ++ am__untar="$_am_tar -xf -" ++ ;; ++ plaintar) ++ # Must skip GNU tar: if it does not support --format= it doesn't create ++ # ustar tarball either. ++ (tar --version) >/dev/null 2>&1 && continue ++ am__tar='tar chf - "$$tardir"' ++ am__tar_='tar chf - "$tardir"' ++ am__untar='tar xf -' ++ ;; ++ pax) ++ am__tar='pax -L -x $1 -w "$$tardir"' ++ am__tar_='pax -L -x $1 -w "$tardir"' ++ am__untar='pax -r' ++ ;; ++ cpio) ++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L' ++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L' ++ am__untar='cpio -i -H $1 -d' ++ ;; ++ none) ++ am__tar=false ++ am__tar_=false ++ am__untar=false ++ ;; ++ esac ++ ++ # If the value was cached, stop now. We just wanted to have am__tar ++ # and am__untar set. ++ test -n "${am_cv_prog_tar_$1}" && break ++ ++ # tar/untar a dummy directory, and stop if the command works. ++ rm -rf conftest.dir ++ mkdir conftest.dir ++ echo GrepMe > conftest.dir/file ++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) ++ rm -rf conftest.dir ++ if test -s conftest.tar; then ++ AM_RUN_LOG([$am__untar <conftest.tar]) ++ AM_RUN_LOG([cat conftest.dir/file]) ++ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break + fi +- fi]) ++ done ++ rm -rf conftest.dir ++ ++ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) ++ AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + ++AC_SUBST([am__tar]) ++AC_SUBST([am__untar]) ++]) # _AM_PROG_TAR ++ ++m4_include([m4/gettext.m4]) ++m4_include([m4/host-cpu-c-abi.m4]) ++m4_include([m4/iconv.m4]) ++m4_include([m4/intlmacosx.m4]) ++m4_include([m4/lib-ld.m4]) ++m4_include([m4/lib-link.m4]) ++m4_include([m4/lib-prefix.m4]) ++m4_include([m4/nls.m4]) ++m4_include([m4/po.m4]) ++m4_include([m4/progtest.m4]) ++m4_include([acinclude.m4]) +diff -uprN clean/lrzsz-0.12.20/ChangeLog lrzsz-0.12.20/ChangeLog +--- clean/lrzsz-0.12.20/ChangeLog 1998-12-29 22:49:56.000000000 +0000 ++++ lrzsz-0.12.20/ChangeLog 2019-11-25 18:11:54.000000000 +0000 +@@ -1,3 +1,9 @@ ++2019-11-25 gettextize <bug-gnu-gettext@gnu.org> ++ ++ * Makefile.am (SUBDIRS): Remove intl. ++ (ACLOCAL_AMFLAGS): New variable. ++ (EXTRA_DIST): Add config.rpath, m4/ChangeLog. ++ + 1998-12-29 Uwe Ohse <uwe@ohse.de> + + * src/lrz.c: removed stpcpy call. +diff -uprN clean/lrzsz-0.12.20/compile lrzsz-0.12.20/compile +--- clean/lrzsz-0.12.20/compile 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/compile 2019-09-30 10:52:39.000000000 +0100 +@@ -0,0 +1,348 @@ ++#! /bin/sh ++# Wrapper for compilers which do not understand '-c -o'. ++ ++scriptversion=2016-01-11.22; # UTC ++ ++# Copyright (C) 1999-2017 Free Software Foundation, Inc. ++# Written by Tom Tromey <tromey@cygnus.com>. ++# ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2, or (at your option) ++# any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program. If not, see <http://www.gnu.org/licenses/>. ++ ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. ++ ++# This file is maintained in Automake, please report ++# bugs to <bug-automake@gnu.org> or send patches to ++# <automake-patches@gnu.org>. ++ ++nl=' ++' ++ ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent tools from complaining about whitespace usage. ++IFS=" "" $nl" ++ ++file_conv= ++ ++# func_file_conv build_file lazy ++# Convert a $build file to $host form and store it in $file ++# Currently only supports Windows hosts. If the determined conversion ++# type is listed in (the comma separated) LAZY, no conversion will ++# take place. ++func_file_conv () ++{ ++ file=$1 ++ case $file in ++ / | /[!/]*) # absolute file, and not a UNC file ++ if test -z "$file_conv"; then ++ # lazily determine how to convert abs files ++ case `uname -s` in ++ MINGW*) ++ file_conv=mingw ++ ;; ++ CYGWIN*) ++ file_conv=cygwin ++ ;; ++ *) ++ file_conv=wine ++ ;; ++ esac ++ fi ++ case $file_conv/,$2, in ++ *,$file_conv,*) ++ ;; ++ mingw/*) ++ file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` ++ ;; ++ cygwin/*) ++ file=`cygpath -m "$file" || echo "$file"` ++ ;; ++ wine/*) ++ file=`winepath -w "$file" || echo "$file"` ++ ;; ++ esac ++ ;; ++ esac ++} ++ ++# func_cl_dashL linkdir ++# Make cl look for libraries in LINKDIR ++func_cl_dashL () ++{ ++ func_file_conv "$1" ++ if test -z "$lib_path"; then ++ lib_path=$file ++ else ++ lib_path="$lib_path;$file" ++ fi ++ linker_opts="$linker_opts -LIBPATH:$file" ++} ++ ++# func_cl_dashl library ++# Do a library search-path lookup for cl ++func_cl_dashl () ++{ ++ lib=$1 ++ found=no ++ save_IFS=$IFS ++ IFS=';' ++ for dir in $lib_path $LIB ++ do ++ IFS=$save_IFS ++ if $shared && test -f "$dir/$lib.dll.lib"; then ++ found=yes ++ lib=$dir/$lib.dll.lib ++ break ++ fi ++ if test -f "$dir/$lib.lib"; then ++ found=yes ++ lib=$dir/$lib.lib ++ break ++ fi ++ if test -f "$dir/lib$lib.a"; then ++ found=yes ++ lib=$dir/lib$lib.a ++ break ++ fi ++ done ++ IFS=$save_IFS ++ ++ if test "$found" != yes; then ++ lib=$lib.lib ++ fi ++} ++ ++# func_cl_wrapper cl arg... ++# Adjust compile command to suit cl ++func_cl_wrapper () ++{ ++ # Assume a capable shell ++ lib_path= ++ shared=: ++ linker_opts= ++ for arg ++ do ++ if test -n "$eat"; then ++ eat= ++ else ++ case $1 in ++ -o) ++ # configure might choose to run compile as 'compile cc -o foo foo.c'. ++ eat=1 ++ case $2 in ++ *.o | *.[oO][bB][jJ]) ++ func_file_conv "$2" ++ set x "$@" -Fo"$file" ++ shift ++ ;; ++ *) ++ func_file_conv "$2" ++ set x "$@" -Fe"$file" ++ shift ++ ;; ++ esac ++ ;; ++ -I) ++ eat=1 ++ func_file_conv "$2" mingw ++ set x "$@" -I"$file" ++ shift ++ ;; ++ -I*) ++ func_file_conv "${1#-I}" mingw ++ set x "$@" -I"$file" ++ shift ++ ;; ++ -l) ++ eat=1 ++ func_cl_dashl "$2" ++ set x "$@" "$lib" ++ shift ++ ;; ++ -l*) ++ func_cl_dashl "${1#-l}" ++ set x "$@" "$lib" ++ shift ++ ;; ++ -L) ++ eat=1 ++ func_cl_dashL "$2" ++ ;; ++ -L*) ++ func_cl_dashL "${1#-L}" ++ ;; ++ -static) ++ shared=false ++ ;; ++ -Wl,*) ++ arg=${1#-Wl,} ++ save_ifs="$IFS"; IFS=',' ++ for flag in $arg; do ++ IFS="$save_ifs" ++ linker_opts="$linker_opts $flag" ++ done ++ IFS="$save_ifs" ++ ;; ++ -Xlinker) ++ eat=1 ++ linker_opts="$linker_opts $2" ++ ;; ++ -*) ++ set x "$@" "$1" ++ shift ++ ;; ++ *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) ++ func_file_conv "$1" ++ set x "$@" -Tp"$file" ++ shift ++ ;; ++ *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) ++ func_file_conv "$1" mingw ++ set x "$@" "$file" ++ shift ++ ;; ++ *) ++ set x "$@" "$1" ++ shift ++ ;; ++ esac ++ fi ++ shift ++ done ++ if test -n "$linker_opts"; then ++ linker_opts="-link$linker_opts" ++ fi ++ exec "$@" $linker_opts ++ exit 1 ++} ++ ++eat= ++ ++case $1 in ++ '') ++ echo "$0: No command. Try '$0 --help' for more information." 1>&2 ++ exit 1; ++ ;; ++ -h | --h*) ++ cat <<\EOF ++Usage: compile [--help] [--version] PROGRAM [ARGS] ++ ++Wrapper for compilers which do not understand '-c -o'. ++Remove '-o dest.o' from ARGS, run PROGRAM with the remaining ++arguments, and rename the output as expected. ++ ++If you are trying to build a whole package this is not the ++right script to run: please start by reading the file 'INSTALL'. ++ ++Report bugs to <bug-automake@gnu.org>. ++EOF ++ exit $? ++ ;; ++ -v | --v*) ++ echo "compile $scriptversion" ++ exit $? ++ ;; ++ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \ ++ icl | *[/\\]icl | icl.exe | *[/\\]icl.exe ) ++ func_cl_wrapper "$@" # Doesn't return... ++ ;; ++esac ++ ++ofile= ++cfile= ++ ++for arg ++do ++ if test -n "$eat"; then ++ eat= ++ else ++ case $1 in ++ -o) ++ # configure might choose to run compile as 'compile cc -o foo foo.c'. ++ # So we strip '-o arg' only if arg is an object. ++ eat=1 ++ case $2 in ++ *.o | *.obj) ++ ofile=$2 ++ ;; ++ *) ++ set x "$@" -o "$2" ++ shift ++ ;; ++ esac ++ ;; ++ *.c) ++ cfile=$1 ++ set x "$@" "$1" ++ shift ++ ;; ++ *) ++ set x "$@" "$1" ++ shift ++ ;; ++ esac ++ fi ++ shift ++done ++ ++if test -z "$ofile" || test -z "$cfile"; then ++ # If no '-o' option was seen then we might have been invoked from a ++ # pattern rule where we don't need one. That is ok -- this is a ++ # normal compilation that the losing compiler can handle. If no ++ # '.c' file was seen then we are probably linking. That is also ++ # ok. ++ exec "$@" ++fi ++ ++# Name of file we expect compiler to create. ++cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` ++ ++# Create the lock directory. ++# Note: use '[/\\:.-]' here to ensure that we don't use the same name ++# that we are using for the .o file. Also, base the name on the expected ++# object file name, since that is what matters with a parallel build. ++lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d ++while true; do ++ if mkdir "$lockdir" >/dev/null 2>&1; then ++ break ++ fi ++ sleep 1 ++done ++# FIXME: race condition here if user kills between mkdir and trap. ++trap "rmdir '$lockdir'; exit 1" 1 2 15 ++ ++# Run the compile. ++"$@" ++ret=$? ++ ++if test -f "$cofile"; then ++ test "$cofile" = "$ofile" || mv "$cofile" "$ofile" ++elif test -f "${cofile}bj"; then ++ test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" ++fi ++ ++rmdir "$lockdir" ++exit $ret ++ ++# Local Variables: ++# mode: shell-script ++# sh-indentation: 2 ++# eval: (add-hook 'write-file-hooks 'time-stamp) ++# time-stamp-start: "scriptversion=" ++# time-stamp-format: "%:y-%02m-%02d.%02H" ++# time-stamp-time-zone: "UTC0" ++# time-stamp-end: "; # UTC" ++# End: +diff -uprN clean/lrzsz-0.12.20/config.guess lrzsz-0.12.20/config.guess +--- clean/lrzsz-0.12.20/config.guess 1998-04-26 14:20:59.000000000 +0100 ++++ lrzsz-0.12.20/config.guess 2019-11-26 11:37:46.000000000 +0000 +@@ -1,10 +1,12 @@ + #! /bin/sh + # Attempt to guess a canonical system name. +-# Copyright (C) 1992, 93, 94, 95, 1996 Free Software Foundation, Inc. +-# ++# Copyright 1992-2019 Free Software Foundation, Inc. ++ ++timestamp='2019-04-28' ++ + # This file is free software; you can redistribute it and/or modify it + # under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or ++# the Free Software Foundation; either version 3 of the License, or + # (at your option) any later version. + # + # This program is distributed in the hope that it will be useful, but +@@ -13,82 +15,403 @@ + # General Public License for more details. + # + # You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# along with this program; if not, see <https://www.gnu.org/licenses/>. + # + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. +- +-# Written by Per Bothner <bothner@cygnus.com>. +-# The master version of this file is at the FSF in /home/gd/gnu/lib. ++# the same distribution terms that you use for the rest of that ++# program. This Exception is an additional permission under section 7 ++# of the GNU General Public License, version 3 ("GPLv3"). + # +-# This script attempts to guess a canonical system name similar to +-# config.sub. If it succeeds, it prints the system name on stdout, and +-# exits with 0. Otherwise, it exits with 1. ++# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. + # +-# The plan is that this can be called by configure scripts if you +-# don't specify an explicit system type (host/target name). +-# +-# Only a few systems have been added to this list; please add others +-# (but try to keep the structure clean). ++# You can get the latest version of this script from: ++# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess + # ++# Please send patches to <config-patches@gnu.org>. ++ ++ ++me=`echo "$0" | sed -e 's,.*/,,'` ++ ++usage="\ ++Usage: $0 [OPTION] ++ ++Output the configuration name of the system \`$me' is run on. ++ ++Options: ++ -h, --help print this help, then exit ++ -t, --time-stamp print date of last modification, then exit ++ -v, --version print version number, then exit ++ ++Report bugs and patches to <config-patches@gnu.org>." ++ ++version="\ ++GNU config.guess ($timestamp) ++ ++Originally written by Per Bothner. ++Copyright 1992-2019 Free Software Foundation, Inc. ++ ++This is free software; see the source for copying conditions. There is NO ++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." ++ ++help=" ++Try \`$me --help' for more information." ++ ++# Parse command line ++while test $# -gt 0 ; do ++ case $1 in ++ --time-stamp | --time* | -t ) ++ echo "$timestamp" ; exit ;; ++ --version | -v ) ++ echo "$version" ; exit ;; ++ --help | --h* | -h ) ++ echo "$usage"; exit ;; ++ -- ) # Stop option processing ++ shift; break ;; ++ - ) # Use stdin as input. ++ break ;; ++ -* ) ++ echo "$me: invalid option $1$help" >&2 ++ exit 1 ;; ++ * ) ++ break ;; ++ esac ++done ++ ++if test $# != 0; then ++ echo "$me: too many arguments$help" >&2 ++ exit 1 ++fi ++ ++# CC_FOR_BUILD -- compiler used by this script. Note that the use of a ++# compiler to aid in system detection is discouraged as it requires ++# temporary files to be created and, as you can see below, it is a ++# headache to deal with in a portable fashion. ++ ++# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still ++# use `HOST_CC' if defined, but it is deprecated. ++ ++# Portable tmp directory creation inspired by the Autoconf team. ++ ++tmp= ++# shellcheck disable=SC2172 ++trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15 ++ ++set_cc_for_build() { ++ : "${TMPDIR=/tmp}" ++ # shellcheck disable=SC2039 ++ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || ++ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } || ++ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } || ++ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ++ dummy=$tmp/dummy ++ case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in ++ ,,) echo "int x;" > "$dummy.c" ++ for driver in cc gcc c89 c99 ; do ++ if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then ++ CC_FOR_BUILD="$driver" ++ break ++ fi ++ done ++ if test x"$CC_FOR_BUILD" = x ; then ++ CC_FOR_BUILD=no_compiler_found ++ fi ++ ;; ++ ,,*) CC_FOR_BUILD=$CC ;; ++ ,*,*) CC_FOR_BUILD=$HOST_CC ;; ++ esac ++} + + # This is needed to find uname on a Pyramid OSx when run in the BSD universe. +-# (ghazi@noc.rutgers.edu 8/24/94.) +-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then ++# (ghazi@noc.rutgers.edu 1994-08-24) ++if test -f /.attbin/uname ; then + PATH=$PATH:/.attbin ; export PATH + fi + + UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown + UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown ++UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown + UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +-trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15 ++case "$UNAME_SYSTEM" in ++Linux|GNU|GNU/*) ++ # If the system lacks a compiler, then just pick glibc. ++ # We could probably try harder. ++ LIBC=gnu ++ ++ set_cc_for_build ++ cat <<-EOF > "$dummy.c" ++ #include <features.h> ++ #if defined(__UCLIBC__) ++ LIBC=uclibc ++ #elif defined(__dietlibc__) ++ LIBC=dietlibc ++ #else ++ LIBC=gnu ++ #endif ++ EOF ++ eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`" ++ ++ # If ldd exists, use it to detect musl libc. ++ if command -v ldd >/dev/null && \ ++ ldd --version 2>&1 | grep -q ^musl ++ then ++ LIBC=musl ++ fi ++ ;; ++esac + + # Note: order is significant - the case branches are not exclusive. + +-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in ++case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in ++ *:NetBSD:*:*) ++ # NetBSD (nbsd) targets should (where applicable) match one or ++ # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, ++ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently ++ # switched to ELF, *-*-netbsd* would select the old ++ # object file format. This provides both forward ++ # compatibility and a consistent mechanism for selecting the ++ # object file format. ++ # ++ # Note: NetBSD doesn't particularly care about the vendor ++ # portion of the name. We always set it to "unknown". ++ sysctl="sysctl -n hw.machine_arch" ++ UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ ++ "/sbin/$sysctl" 2>/dev/null || \ ++ "/usr/sbin/$sysctl" 2>/dev/null || \ ++ echo unknown)` ++ case "$UNAME_MACHINE_ARCH" in ++ armeb) machine=armeb-unknown ;; ++ arm*) machine=arm-unknown ;; ++ sh3el) machine=shl-unknown ;; ++ sh3eb) machine=sh-unknown ;; ++ sh5el) machine=sh5le-unknown ;; ++ earmv*) ++ arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'` ++ endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'` ++ machine="${arch}${endian}"-unknown ++ ;; ++ *) machine="$UNAME_MACHINE_ARCH"-unknown ;; ++ esac ++ # The Operating System including object format, if it has switched ++ # to ELF recently (or will in the future) and ABI. ++ case "$UNAME_MACHINE_ARCH" in ++ earm*) ++ os=netbsdelf ++ ;; ++ arm*|i386|m68k|ns32k|sh3*|sparc|vax) ++ set_cc_for_build ++ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ ++ | grep -q __ELF__ ++ then ++ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). ++ # Return netbsd for either. FIX? ++ os=netbsd ++ else ++ os=netbsdelf ++ fi ++ ;; ++ *) ++ os=netbsd ++ ;; ++ esac ++ # Determine ABI tags. ++ case "$UNAME_MACHINE_ARCH" in ++ earm*) ++ expr='s/^earmv[0-9]/-eabi/;s/eb$//' ++ abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"` ++ ;; ++ esac ++ # The OS release ++ # Debian GNU/NetBSD machines have a different userland, and ++ # thus, need a distinct triplet. However, they do not need ++ # kernel version information, so it can be replaced with a ++ # suitable tag, in the style of linux-gnu. ++ case "$UNAME_VERSION" in ++ Debian*) ++ release='-gnu' ++ ;; ++ *) ++ release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2` ++ ;; ++ esac ++ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: ++ # contains redundant information, the shorter form: ++ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. ++ echo "$machine-${os}${release}${abi-}" ++ exit ;; ++ *:Bitrig:*:*) ++ UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` ++ echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE" ++ exit ;; ++ *:OpenBSD:*:*) ++ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` ++ echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE" ++ exit ;; ++ *:LibertyBSD:*:*) ++ UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` ++ echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE" ++ exit ;; ++ *:MidnightBSD:*:*) ++ echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE" ++ exit ;; ++ *:ekkoBSD:*:*) ++ echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE" ++ exit ;; ++ *:SolidBSD:*:*) ++ echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE" ++ exit ;; ++ macppc:MirBSD:*:*) ++ echo powerpc-unknown-mirbsd"$UNAME_RELEASE" ++ exit ;; ++ *:MirBSD:*:*) ++ echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE" ++ exit ;; ++ *:Sortix:*:*) ++ echo "$UNAME_MACHINE"-unknown-sortix ++ exit ;; ++ *:Redox:*:*) ++ echo "$UNAME_MACHINE"-unknown-redox ++ exit ;; ++ mips:OSF1:*.*) ++ echo mips-dec-osf1 ++ exit ;; + alpha:OSF1:*:*) ++ case $UNAME_RELEASE in ++ *4.0) ++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ++ ;; ++ *5.*) ++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ++ ;; ++ esac ++ # According to Compaq, /usr/sbin/psrinfo has been available on ++ # OSF/1 and Tru64 systems produced since 1995. I hope that ++ # covers most systems running today. This code pipes the CPU ++ # types through head -n 1, so we only detect the type of CPU 0. ++ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` ++ case "$ALPHA_CPU_TYPE" in ++ "EV4 (21064)") ++ UNAME_MACHINE=alpha ;; ++ "EV4.5 (21064)") ++ UNAME_MACHINE=alpha ;; ++ "LCA4 (21066/21068)") ++ UNAME_MACHINE=alpha ;; ++ "EV5 (21164)") ++ UNAME_MACHINE=alphaev5 ;; ++ "EV5.6 (21164A)") ++ UNAME_MACHINE=alphaev56 ;; ++ "EV5.6 (21164PC)") ++ UNAME_MACHINE=alphapca56 ;; ++ "EV5.7 (21164PC)") ++ UNAME_MACHINE=alphapca57 ;; ++ "EV6 (21264)") ++ UNAME_MACHINE=alphaev6 ;; ++ "EV6.7 (21264A)") ++ UNAME_MACHINE=alphaev67 ;; ++ "EV6.8CB (21264C)") ++ UNAME_MACHINE=alphaev68 ;; ++ "EV6.8AL (21264B)") ++ UNAME_MACHINE=alphaev68 ;; ++ "EV6.8CX (21264D)") ++ UNAME_MACHINE=alphaev68 ;; ++ "EV6.9A (21264/EV69A)") ++ UNAME_MACHINE=alphaev69 ;; ++ "EV7 (21364)") ++ UNAME_MACHINE=alphaev7 ;; ++ "EV7.9 (21364A)") ++ UNAME_MACHINE=alphaev79 ;; ++ esac ++ # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. +- echo alpha-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//'` +- exit 0 ;; +- 21064:Windows_NT:50:3) +- echo alpha-dec-winnt3.5 +- exit 0 ;; ++ echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`" ++ # Reset EXIT trap before exiting to avoid spurious non-zero exit code. ++ exitcode=$? ++ trap '' 0 ++ exit $exitcode ;; + Amiga*:UNIX_System_V:4.0:*) +- echo m68k-cbm-sysv4 +- exit 0;; +- amiga:NetBSD:*:*) +- echo m68k-cbm-netbsd${UNAME_RELEASE} +- exit 0 ;; ++ echo m68k-unknown-sysv4 ++ exit ;; ++ *:[Aa]miga[Oo][Ss]:*:*) ++ echo "$UNAME_MACHINE"-unknown-amigaos ++ exit ;; ++ *:[Mm]orph[Oo][Ss]:*:*) ++ echo "$UNAME_MACHINE"-unknown-morphos ++ exit ;; ++ *:OS/390:*:*) ++ echo i370-ibm-openedition ++ exit ;; ++ *:z/VM:*:*) ++ echo s390-ibm-zvmoe ++ exit ;; ++ *:OS400:*:*) ++ echo powerpc-ibm-os400 ++ exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) +- echo arm-acorn-riscix${UNAME_RELEASE} +- exit 0;; +- Pyramid*:OSx*:*:*) ++ echo arm-acorn-riscix"$UNAME_RELEASE" ++ exit ;; ++ arm*:riscos:*:*|arm*:RISCOS:*:*) ++ echo arm-unknown-riscos ++ exit ;; ++ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) ++ echo hppa1.1-hitachi-hiuxmpp ++ exit ;; ++ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) ++ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi +- exit 0 ;; +- sun4*:SunOS:5.*:*) +- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; +- i86pc:SunOS:5.*:*) +- echo i386-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ exit ;; ++ NILE*:*:*:dcosx) ++ echo pyramid-pyramid-svr4 ++ exit ;; ++ DRS?6000:unix:4.0:6*) ++ echo sparc-icl-nx6 ++ exit ;; ++ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) ++ case `/usr/bin/uname -p` in ++ sparc) echo sparc-icl-nx7; exit ;; ++ esac ;; ++ s390x:SunOS:*:*) ++ echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" ++ exit ;; ++ sun4H:SunOS:5.*:*) ++ echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" ++ exit ;; ++ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) ++ echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" ++ exit ;; ++ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) ++ echo i386-pc-auroraux"$UNAME_RELEASE" ++ exit ;; ++ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) ++ set_cc_for_build ++ SUN_ARCH=i386 ++ # If there is a compiler, see if it is configured for 64-bit objects. ++ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. ++ # This test works for both compilers. ++ if [ "$CC_FOR_BUILD" != no_compiler_found ]; then ++ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ ++ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ ++ grep IS_64BIT_ARCH >/dev/null ++ then ++ SUN_ARCH=x86_64 ++ fi ++ fi ++ echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" ++ exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. +- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" ++ exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) +@@ -96,82 +419,170 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. +- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` +- exit 0 ;; ++ echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`" ++ exit ;; + sun3*:SunOS:*:*) +- echo m68k-sun-sunos${UNAME_RELEASE} +- exit 0 ;; +- atari*:NetBSD:*:*) +- echo m68k-atari-netbsd${UNAME_RELEASE} +- exit 0 ;; +- sun3*:NetBSD:*:*) +- echo m68k-sun-netbsd${UNAME_RELEASE} +- exit 0 ;; +- mac68k:NetBSD:*:*) +- echo m68k-apple-netbsd${UNAME_RELEASE} +- exit 0 ;; ++ echo m68k-sun-sunos"$UNAME_RELEASE" ++ exit ;; ++ sun*:*:4.2BSD:*) ++ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` ++ test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3 ++ case "`/bin/arch`" in ++ sun3) ++ echo m68k-sun-sunos"$UNAME_RELEASE" ++ ;; ++ sun4) ++ echo sparc-sun-sunos"$UNAME_RELEASE" ++ ;; ++ esac ++ exit ;; ++ aushp:SunOS:*:*) ++ echo sparc-auspex-sunos"$UNAME_RELEASE" ++ exit ;; ++ # The situation for MiNT is a little confusing. The machine name ++ # can be virtually everything (everything which is not ++ # "atarist" or "atariste" at least should have a processor ++ # > m68000). The system name ranges from "MiNT" over "FreeMiNT" ++ # to the lowercase version "mint" (or "freemint"). Finally ++ # the system name "TOS" denotes a system which is actually not ++ # MiNT. But MiNT is downward compatible to TOS, so this should ++ # be no problem. ++ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) ++ echo m68k-atari-mint"$UNAME_RELEASE" ++ exit ;; ++ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) ++ echo m68k-atari-mint"$UNAME_RELEASE" ++ exit ;; ++ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) ++ echo m68k-atari-mint"$UNAME_RELEASE" ++ exit ;; ++ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) ++ echo m68k-milan-mint"$UNAME_RELEASE" ++ exit ;; ++ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) ++ echo m68k-hades-mint"$UNAME_RELEASE" ++ exit ;; ++ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) ++ echo m68k-unknown-mint"$UNAME_RELEASE" ++ exit ;; ++ m68k:machten:*:*) ++ echo m68k-apple-machten"$UNAME_RELEASE" ++ exit ;; ++ powerpc:machten:*:*) ++ echo powerpc-apple-machten"$UNAME_RELEASE" ++ exit ;; ++ RISC*:Mach:*:*) ++ echo mips-dec-mach_bsd4.3 ++ exit ;; + RISC*:ULTRIX:*:*) +- echo mips-dec-ultrix${UNAME_RELEASE} +- exit 0 ;; ++ echo mips-dec-ultrix"$UNAME_RELEASE" ++ exit ;; + VAX*:ULTRIX*:*:*) +- echo vax-dec-ultrix${UNAME_RELEASE} +- exit 0 ;; +- mips:*:4*:UMIPS) +- echo mips-mips-riscos4sysv +- exit 0 ;; +- mips:*:5*:RISCos) +- echo mips-mips-riscos${UNAME_RELEASE} +- exit 0 ;; ++ echo vax-dec-ultrix"$UNAME_RELEASE" ++ exit ;; ++ 2020:CLIX:*:* | 2430:CLIX:*:*) ++ echo clipper-intergraph-clix"$UNAME_RELEASE" ++ exit ;; ++ mips:*:*:UMIPS | mips:*:*:RISCos) ++ set_cc_for_build ++ sed 's/^ //' << EOF > "$dummy.c" ++#ifdef __cplusplus ++#include <stdio.h> /* for printf() prototype */ ++ int main (int argc, char *argv[]) { ++#else ++ int main (argc, argv) int argc; char *argv[]; { ++#endif ++ #if defined (host_mips) && defined (MIPSEB) ++ #if defined (SYSTYPE_SYSV) ++ printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0); ++ #endif ++ #if defined (SYSTYPE_SVR4) ++ printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0); ++ #endif ++ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) ++ printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0); ++ #endif ++ #endif ++ exit (-1); ++ } ++EOF ++ $CC_FOR_BUILD -o "$dummy" "$dummy.c" && ++ dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` && ++ SYSTEM_NAME=`"$dummy" "$dummyarg"` && ++ { echo "$SYSTEM_NAME"; exit; } ++ echo mips-mips-riscos"$UNAME_RELEASE" ++ exit ;; ++ Motorola:PowerMAX_OS:*:*) ++ echo powerpc-motorola-powermax ++ exit ;; ++ Motorola:*:4.3:PL8-*) ++ echo powerpc-harris-powermax ++ exit ;; ++ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) ++ echo powerpc-harris-powermax ++ exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix +- exit 0 ;; ++ exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 +- exit 0 ;; ++ exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 +- exit 0 ;; ++ exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 +- exit 0 ;; ++ exit ;; + AViiON:dgux:*:*) +- # DG/UX returns AViiON for all architectures +- UNAME_PROCESSOR=`/usr/bin/uname -p` +- if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88100 ] ; then +- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \ +- -o ${TARGET_BINARY_INTERFACE}x = x ] ; then +- echo m88k-dg-dgux${UNAME_RELEASE} +- else +- echo m88k-dg-dguxbcs${UNAME_RELEASE} +- fi +- else echo i586-dg-dgux${UNAME_RELEASE} +- fi +- exit 0 ;; ++ # DG/UX returns AViiON for all architectures ++ UNAME_PROCESSOR=`/usr/bin/uname -p` ++ if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ] ++ then ++ if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \ ++ [ "$TARGET_BINARY_INTERFACE"x = x ] ++ then ++ echo m88k-dg-dgux"$UNAME_RELEASE" ++ else ++ echo m88k-dg-dguxbcs"$UNAME_RELEASE" ++ fi ++ else ++ echo i586-dg-dgux"$UNAME_RELEASE" ++ fi ++ exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 +- exit 0 ;; ++ exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 +- exit 0 ;; ++ exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 +- exit 0 ;; ++ exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd +- exit 0 ;; ++ exit ;; + *:IRIX*:*:*) +- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` +- exit 0 ;; +- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. +- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id +- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' +- i[34]86:AIX:*:*) ++ echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`" ++ exit ;; ++ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. ++ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id ++ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' ++ i*86:AIX:*:*) + echo i386-ibm-aix +- exit 0 ;; ++ exit ;; ++ ia64:AIX:*:*) ++ if [ -x /usr/bin/oslevel ] ; then ++ IBM_REV=`/usr/bin/oslevel` ++ else ++ IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" ++ fi ++ echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV" ++ exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then +- sed 's/^ //' << EOF >dummy.c ++ set_cc_for_build ++ sed 's/^ //' << EOF > "$dummy.c" + #include <sys/systemcfg.h> + + main() +@@ -182,61 +593,143 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ + exit(0); + } + EOF +- ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 +- rm -f dummy.c dummy +- echo rs6000-ibm-aix3.2.5 ++ if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` ++ then ++ echo "$SYSTEM_NAME" ++ else ++ echo rs6000-ibm-aix3.2.5 ++ fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi +- exit 0 ;; +- *:AIX:*:4) +- if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then ++ exit ;; ++ *:AIX:*:[4567]) ++ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` ++ if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi +- if [ -x /usr/bin/oslevel ] ; then +- IBM_REV=`/usr/bin/oslevel` ++ if [ -x /usr/bin/lslpp ] ; then ++ IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | ++ awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` + else +- IBM_REV=4.${UNAME_RELEASE} ++ IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" + fi +- echo ${IBM_ARCH}-ibm-aix${IBM_REV} +- exit 0 ;; ++ echo "$IBM_ARCH"-ibm-aix"$IBM_REV" ++ exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix +- exit 0 ;; +- ibmrt:4.4BSD:*|romp-ibm:BSD:*) ++ exit ;; ++ ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*) + echo romp-ibm-bsd4.4 +- exit 0 ;; +- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and +- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to +- exit 0 ;; # report: romp-ibm BSD 4.3 ++ exit ;; ++ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and ++ echo romp-ibm-bsd"$UNAME_RELEASE" # 4.3 with uname added to ++ exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx +- exit 0 ;; ++ exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 +- exit 0 ;; ++ exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd +- exit 0 ;; ++ exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 +- exit 0 ;; +- 9000/[3478]??:HP-UX:*:*) +- case "${UNAME_MACHINE}" in +- 9000/31? ) HP_ARCH=m68000 ;; +- 9000/[34]?? ) HP_ARCH=m68k ;; +- 9000/7?? | 9000/8?[679] ) HP_ARCH=hppa1.1 ;; +- 9000/8?? ) HP_ARCH=hppa1.0 ;; +- esac +- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` +- echo ${HP_ARCH}-hp-hpux${HPUX_REV} +- exit 0 ;; ++ exit ;; ++ 9000/[34678]??:HP-UX:*:*) ++ HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` ++ case "$UNAME_MACHINE" in ++ 9000/31?) HP_ARCH=m68000 ;; ++ 9000/[34]??) HP_ARCH=m68k ;; ++ 9000/[678][0-9][0-9]) ++ if [ -x /usr/bin/getconf ]; then ++ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` ++ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` ++ case "$sc_cpu_version" in ++ 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 ++ 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 ++ 532) # CPU_PA_RISC2_0 ++ case "$sc_kernel_bits" in ++ 32) HP_ARCH=hppa2.0n ;; ++ 64) HP_ARCH=hppa2.0w ;; ++ '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 ++ esac ;; ++ esac ++ fi ++ if [ "$HP_ARCH" = "" ]; then ++ set_cc_for_build ++ sed 's/^ //' << EOF > "$dummy.c" ++ ++ #define _HPUX_SOURCE ++ #include <stdlib.h> ++ #include <unistd.h> ++ ++ int main () ++ { ++ #if defined(_SC_KERNEL_BITS) ++ long bits = sysconf(_SC_KERNEL_BITS); ++ #endif ++ long cpu = sysconf (_SC_CPU_VERSION); ++ ++ switch (cpu) ++ { ++ case CPU_PA_RISC1_0: puts ("hppa1.0"); break; ++ case CPU_PA_RISC1_1: puts ("hppa1.1"); break; ++ case CPU_PA_RISC2_0: ++ #if defined(_SC_KERNEL_BITS) ++ switch (bits) ++ { ++ case 64: puts ("hppa2.0w"); break; ++ case 32: puts ("hppa2.0n"); break; ++ default: puts ("hppa2.0"); break; ++ } break; ++ #else /* !defined(_SC_KERNEL_BITS) */ ++ puts ("hppa2.0"); break; ++ #endif ++ default: puts ("hppa1.0"); break; ++ } ++ exit (0); ++ } ++EOF ++ (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"` ++ test -z "$HP_ARCH" && HP_ARCH=hppa ++ fi ;; ++ esac ++ if [ "$HP_ARCH" = hppa2.0w ] ++ then ++ set_cc_for_build ++ ++ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating ++ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler ++ # generating 64-bit code. GNU and HP use different nomenclature: ++ # ++ # $ CC_FOR_BUILD=cc ./config.guess ++ # => hppa2.0w-hp-hpux11.23 ++ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess ++ # => hppa64-hp-hpux11.23 ++ ++ if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | ++ grep -q __LP64__ ++ then ++ HP_ARCH=hppa2.0w ++ else ++ HP_ARCH=hppa64 ++ fi ++ fi ++ echo "$HP_ARCH"-hp-hpux"$HPUX_REV" ++ exit ;; ++ ia64:HP-UX:*:*) ++ HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` ++ echo ia64-hp-hpux"$HPUX_REV" ++ exit ;; + 3050*:HI-UX:*:*) +- sed 's/^ //' << EOF >dummy.c ++ set_cc_for_build ++ sed 's/^ //' << EOF > "$dummy.c" + #include <unistd.h> + int + main () +@@ -261,213 +754,727 @@ EOF + exit (0); + } + EOF +- ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 +- rm -f dummy.c dummy ++ $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` && ++ { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 +- exit 0 ;; +- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) ++ exit ;; ++ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*) + echo hppa1.1-hp-bsd +- exit 0 ;; ++ exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd +- exit 0 ;; +- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) ++ exit ;; ++ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) ++ echo hppa1.0-hp-mpeix ++ exit ;; ++ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*) + echo hppa1.1-hp-osf +- exit 0 ;; ++ exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf +- exit 0 ;; ++ exit ;; ++ i*86:OSF1:*:*) ++ if [ -x /usr/sbin/sysversion ] ; then ++ echo "$UNAME_MACHINE"-unknown-osf1mk ++ else ++ echo "$UNAME_MACHINE"-unknown-osf1 ++ fi ++ exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites +- exit 0 ;; ++ exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd +- exit 0 ;; ++ exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi +- exit 0 ;; ++ exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd +- exit 0 ;; ++ exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd +- exit 0 ;; ++ exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd +- exit 0 ;; +- CRAY*X-MP:*:*:*) +- echo xmp-cray-unicos +- exit 0 ;; ++ exit ;; + CRAY*Y-MP:*:*:*) +- echo ymp-cray-unicos${UNAME_RELEASE} +- exit 0 ;; +- CRAY*C90:*:*:*) +- echo c90-cray-unicos${UNAME_RELEASE} +- exit 0 ;; +- CRAY-2:*:*:*) +- echo cray2-cray-unicos +- exit 0 ;; +- hp3[0-9][05]:NetBSD:*:*) +- echo m68k-hp-netbsd${UNAME_RELEASE} +- exit 0 ;; +- i[34]86:BSD/386:*:* | *:BSD/OS:*:*) +- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} +- exit 0 ;; ++ echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' ++ exit ;; ++ CRAY*[A-Z]90:*:*:*) ++ echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \ ++ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ ++ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ ++ -e 's/\.[^.]*$/.X/' ++ exit ;; ++ CRAY*TS:*:*:*) ++ echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' ++ exit ;; ++ CRAY*T3E:*:*:*) ++ echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' ++ exit ;; ++ CRAY*SV1:*:*:*) ++ echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' ++ exit ;; ++ *:UNICOS/mp:*:*) ++ echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' ++ exit ;; ++ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) ++ FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` ++ FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` ++ FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'` ++ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" ++ exit ;; ++ 5000:UNIX_System_V:4.*:*) ++ FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` ++ FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` ++ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" ++ exit ;; ++ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) ++ echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE" ++ exit ;; ++ sparc*:BSD/OS:*:*) ++ echo sparc-unknown-bsdi"$UNAME_RELEASE" ++ exit ;; ++ *:BSD/OS:*:*) ++ echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE" ++ exit ;; ++ arm:FreeBSD:*:*) ++ UNAME_PROCESSOR=`uname -p` ++ set_cc_for_build ++ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ ++ | grep -q __ARM_PCS_VFP ++ then ++ echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabi ++ else ++ echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabihf ++ fi ++ exit ;; + *:FreeBSD:*:*) +- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` +- exit 0 ;; +- *:NetBSD:*:*) +- echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` +- exit 0 ;; ++ UNAME_PROCESSOR=`/usr/bin/uname -p` ++ case "$UNAME_PROCESSOR" in ++ amd64) ++ UNAME_PROCESSOR=x86_64 ;; ++ i386) ++ UNAME_PROCESSOR=i586 ;; ++ esac ++ echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" ++ exit ;; + i*:CYGWIN*:*) +- echo i386-unknown-cygwin32 +- exit 0 ;; +- p*:CYGWIN*:*) +- echo powerpcle-unknown-cygwin32 +- exit 0 ;; ++ echo "$UNAME_MACHINE"-pc-cygwin ++ exit ;; ++ *:MINGW64*:*) ++ echo "$UNAME_MACHINE"-pc-mingw64 ++ exit ;; ++ *:MINGW*:*) ++ echo "$UNAME_MACHINE"-pc-mingw32 ++ exit ;; ++ *:MSYS*:*) ++ echo "$UNAME_MACHINE"-pc-msys ++ exit ;; ++ i*:PW*:*) ++ echo "$UNAME_MACHINE"-pc-pw32 ++ exit ;; ++ *:Interix*:*) ++ case "$UNAME_MACHINE" in ++ x86) ++ echo i586-pc-interix"$UNAME_RELEASE" ++ exit ;; ++ authenticamd | genuineintel | EM64T) ++ echo x86_64-unknown-interix"$UNAME_RELEASE" ++ exit ;; ++ IA64) ++ echo ia64-unknown-interix"$UNAME_RELEASE" ++ exit ;; ++ esac ;; ++ i*:UWIN*:*) ++ echo "$UNAME_MACHINE"-pc-uwin ++ exit ;; ++ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) ++ echo x86_64-pc-cygwin ++ exit ;; + prep*:SunOS:5.*:*) +- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" ++ exit ;; + *:GNU:*:*) +- echo `echo ${UNAME_MACHINE}|sed -e 's,/.*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` +- exit 0 ;; +- *:Linux:*:*) +- # The BFD linker knows what the default object file format is, so +- # first see if it will tell us. +- ld_help_string=`ld --help 2>&1` +- if echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: elf_i[345]86"; then +- echo "${UNAME_MACHINE}-unknown-linux" ; exit 0 +- elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i[345]86linux"; then +- echo "${UNAME_MACHINE}-unknown-linuxaout" ; exit 0 +- elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i[345]86coff"; then +- echo "${UNAME_MACHINE}-unknown-linuxcoff" ; exit 0 +- elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68kelf"; then +- echo "${UNAME_MACHINE}-unknown-linux" ; exit 0 +- elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68klinux"; then +- echo "${UNAME_MACHINE}-unknown-linuxaout" ; exit 0 +- elif test "${UNAME_MACHINE}" = "alpha" ; then +- echo alpha-unknown-linux ; exit 0 +- else +- # Either a pre-BFD a.out linker (linuxoldld) or one that does not give us +- # useful --help. Gcc wants to distinguish between linuxoldld and linuxaout. +- test ! -d /usr/lib/ldscripts/. \ +- && echo "${UNAME_MACHINE}-unknown-linuxoldld" && exit 0 +- # Determine whether the default compiler is a.out or elf +- cat >dummy.c <<EOF +-main(argc, argv) +-int argc; +-char *argv[]; +-{ +-#ifdef __ELF__ +- printf ("%s-unknown-linux\n", argv[1]); +-#else +- printf ("%s-unknown-linuxaout\n", argv[1]); +-#endif +- return 0; +-} ++ # the GNU system ++ echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`" ++ exit ;; ++ *:GNU/*:*:*) ++ # other systems with GNU libc and userland ++ echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC" ++ exit ;; ++ *:Minix:*:*) ++ echo "$UNAME_MACHINE"-unknown-minix ++ exit ;; ++ aarch64:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ aarch64_be:Linux:*:*) ++ UNAME_MACHINE=aarch64_be ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ alpha:Linux:*:*) ++ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in ++ EV5) UNAME_MACHINE=alphaev5 ;; ++ EV56) UNAME_MACHINE=alphaev56 ;; ++ PCA56) UNAME_MACHINE=alphapca56 ;; ++ PCA57) UNAME_MACHINE=alphapca56 ;; ++ EV6) UNAME_MACHINE=alphaev6 ;; ++ EV67) UNAME_MACHINE=alphaev67 ;; ++ EV68*) UNAME_MACHINE=alphaev68 ;; ++ esac ++ objdump --private-headers /bin/sh | grep -q ld.so.1 ++ if test "$?" = 0 ; then LIBC=gnulibc1 ; fi ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ arc:Linux:*:* | arceb:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ arm*:Linux:*:*) ++ set_cc_for_build ++ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ ++ | grep -q __ARM_EABI__ ++ then ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ else ++ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ ++ | grep -q __ARM_PCS_VFP ++ then ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi ++ else ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf ++ fi ++ fi ++ exit ;; ++ avr32*:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ cris:Linux:*:*) ++ echo "$UNAME_MACHINE"-axis-linux-"$LIBC" ++ exit ;; ++ crisv32:Linux:*:*) ++ echo "$UNAME_MACHINE"-axis-linux-"$LIBC" ++ exit ;; ++ e2k:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ frv:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ hexagon:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ i*86:Linux:*:*) ++ echo "$UNAME_MACHINE"-pc-linux-"$LIBC" ++ exit ;; ++ ia64:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ k1om:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ m32r*:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ m68*:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ mips:Linux:*:* | mips64:Linux:*:*) ++ set_cc_for_build ++ IS_GLIBC=0 ++ test x"${LIBC}" = xgnu && IS_GLIBC=1 ++ sed 's/^ //' << EOF > "$dummy.c" ++ #undef CPU ++ #undef mips ++ #undef mipsel ++ #undef mips64 ++ #undef mips64el ++ #if ${IS_GLIBC} && defined(_ABI64) ++ LIBCABI=gnuabi64 ++ #else ++ #if ${IS_GLIBC} && defined(_ABIN32) ++ LIBCABI=gnuabin32 ++ #else ++ LIBCABI=${LIBC} ++ #endif ++ #endif ++ ++ #if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 ++ CPU=mipsisa64r6 ++ #else ++ #if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 ++ CPU=mipsisa32r6 ++ #else ++ #if defined(__mips64) ++ CPU=mips64 ++ #else ++ CPU=mips ++ #endif ++ #endif ++ #endif ++ ++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) ++ MIPS_ENDIAN=el ++ #else ++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) ++ MIPS_ENDIAN= ++ #else ++ MIPS_ENDIAN= ++ #endif ++ #endif + EOF +- ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0 +- rm -f dummy.c dummy +- fi ;; +-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions +-# are messed up and put the nodename in both sysname and nodename. +- i[34]86:DYNIX/ptx:4*:*) ++ eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'`" ++ test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; } ++ ;; ++ mips64el:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ openrisc*:Linux:*:*) ++ echo or1k-unknown-linux-"$LIBC" ++ exit ;; ++ or32:Linux:*:* | or1k*:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ padre:Linux:*:*) ++ echo sparc-unknown-linux-"$LIBC" ++ exit ;; ++ parisc64:Linux:*:* | hppa64:Linux:*:*) ++ echo hppa64-unknown-linux-"$LIBC" ++ exit ;; ++ parisc:Linux:*:* | hppa:Linux:*:*) ++ # Look for CPU level ++ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in ++ PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;; ++ PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;; ++ *) echo hppa-unknown-linux-"$LIBC" ;; ++ esac ++ exit ;; ++ ppc64:Linux:*:*) ++ echo powerpc64-unknown-linux-"$LIBC" ++ exit ;; ++ ppc:Linux:*:*) ++ echo powerpc-unknown-linux-"$LIBC" ++ exit ;; ++ ppc64le:Linux:*:*) ++ echo powerpc64le-unknown-linux-"$LIBC" ++ exit ;; ++ ppcle:Linux:*:*) ++ echo powerpcle-unknown-linux-"$LIBC" ++ exit ;; ++ riscv32:Linux:*:* | riscv64:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ s390:Linux:*:* | s390x:Linux:*:*) ++ echo "$UNAME_MACHINE"-ibm-linux-"$LIBC" ++ exit ;; ++ sh64*:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ sh*:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ sparc:Linux:*:* | sparc64:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ tile*:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ vax:Linux:*:*) ++ echo "$UNAME_MACHINE"-dec-linux-"$LIBC" ++ exit ;; ++ x86_64:Linux:*:*) ++ echo "$UNAME_MACHINE"-pc-linux-"$LIBC" ++ exit ;; ++ xtensa*:Linux:*:*) ++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" ++ exit ;; ++ i*86:DYNIX/ptx:4*:*) ++ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. ++ # earlier versions are messed up and put the nodename in both ++ # sysname and nodename. + echo i386-sequent-sysv4 +- exit 0 ;; +- i[34]86:*:4.*:* | i[34]86:SYSTEM_V:4.*:*) ++ exit ;; ++ i*86:UNIX_SV:4.2MP:2.*) ++ # Unixware is an offshoot of SVR4, but it has its own version ++ # number series starting with 2... ++ # I am not positive that other SVR4 systems won't match this, ++ # I just have to hope. -- rms. ++ # Use sysv4.2uw... so that sysv4* matches it. ++ echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION" ++ exit ;; ++ i*86:OS/2:*:*) ++ # If we were able to find `uname', then EMX Unix compatibility ++ # is probably installed. ++ echo "$UNAME_MACHINE"-pc-os2-emx ++ exit ;; ++ i*86:XTS-300:*:STOP) ++ echo "$UNAME_MACHINE"-unknown-stop ++ exit ;; ++ i*86:atheos:*:*) ++ echo "$UNAME_MACHINE"-unknown-atheos ++ exit ;; ++ i*86:syllable:*:*) ++ echo "$UNAME_MACHINE"-pc-syllable ++ exit ;; ++ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) ++ echo i386-unknown-lynxos"$UNAME_RELEASE" ++ exit ;; ++ i*86:*DOS:*:*) ++ echo "$UNAME_MACHINE"-pc-msdosdjgpp ++ exit ;; ++ i*86:*:4.*:*) ++ UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then +- echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE} ++ echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL" + else +- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE} ++ echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL" + fi +- exit 0 ;; +- i[34]86:*:3.2:*) ++ exit ;; ++ i*86:*:5:[678]*) ++ # UnixWare 7.x, OpenUNIX and OpenServer 6. ++ case `/bin/uname -X | grep "^Machine"` in ++ *486*) UNAME_MACHINE=i486 ;; ++ *Pentium) UNAME_MACHINE=i586 ;; ++ *Pent*|*Celeron) UNAME_MACHINE=i686 ;; ++ esac ++ echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}" ++ exit ;; ++ i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` +- echo ${UNAME_MACHINE}-unknown-isc$UNAME_REL ++ echo "$UNAME_MACHINE"-pc-isc"$UNAME_REL" + elif /bin/uname -X 2>/dev/null >/dev/null ; then +- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` +- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 +- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ ++ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` ++ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 ++ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 +- echo ${UNAME_MACHINE}-unknown-sco$UNAME_REL ++ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ ++ && UNAME_MACHINE=i686 ++ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ ++ && UNAME_MACHINE=i686 ++ echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL" + else +- echo ${UNAME_MACHINE}-unknown-sysv32 ++ echo "$UNAME_MACHINE"-pc-sysv32 + fi +- exit 0 ;; ++ exit ;; ++ pc:*:*:*) ++ # Left here for compatibility: ++ # uname -m prints for DJGPP always 'pc', but it prints nothing about ++ # the processor, so we play safe by assuming i586. ++ # Note: whatever this is, it MUST be the same as what config.sub ++ # prints for the "djgpp" host, or else GDB configure will decide that ++ # this is a cross-build. ++ echo i586-pc-msdosdjgpp ++ exit ;; + Intel:Mach:3*:*) +- echo i386-unknown-mach3 +- exit 0 ;; ++ echo i386-pc-mach3 ++ exit ;; + paragon:*:*:*) + echo i860-intel-osf1 +- exit 0 ;; ++ exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then +- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 ++ echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. +- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 ++ echo i860-unknown-sysv"$UNAME_RELEASE" # Unknown i860-SVR4 + fi +- exit 0 ;; ++ exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv +- exit 0 ;; +- M680[234]0:*:R3V[567]*:*) +- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; +- 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0) +- uname -p 2>/dev/null | grep 86 >/dev/null \ +- && echo i486-ncr-sysv4.3 && exit 0 ;; ++ exit ;; ++ mc68k:UNIX:SYSTEM5:3.51m) ++ echo m68k-convergent-sysv ++ exit ;; ++ M680?0:D-NIX:5.3:*) ++ echo m68k-diab-dnix ++ exit ;; ++ M68*:*:R3V[5678]*:*) ++ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; ++ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) ++ OS_REL='' ++ test -r /etc/.relid \ ++ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` ++ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ ++ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } ++ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ ++ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) +- uname -p 2>/dev/null | grep 86 >/dev/null \ +- && echo i486-ncr-sysv4 && exit 0 ;; +- m680[234]0:LynxOS:2.[23]*:*) +- echo m68k-lynx-lynxos${UNAME_RELEASE} +- exit 0 ;; ++ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ ++ && { echo i486-ncr-sysv4; exit; } ;; ++ NCR*:*:4.2:* | MPRAS*:*:4.2:*) ++ OS_REL='.3' ++ test -r /etc/.relid \ ++ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` ++ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ ++ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } ++ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ ++ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ++ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ ++ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; ++ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) ++ echo m68k-unknown-lynxos"$UNAME_RELEASE" ++ exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 +- exit 0 ;; +- i[34]86:LynxOS:2.[23]*:*) +- echo i386-lynx-lynxos${UNAME_RELEASE} +- exit 0 ;; +- TSUNAMI:LynxOS:2.[23]*:*) +- echo sparc-lynx-lynxos${UNAME_RELEASE} +- exit 0 ;; +- rs6000:LynxOS:2.[23]*:*) +- echo rs6000-lynx-lynxos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; ++ TSUNAMI:LynxOS:2.*:*) ++ echo sparc-unknown-lynxos"$UNAME_RELEASE" ++ exit ;; ++ rs6000:LynxOS:2.*:*) ++ echo rs6000-unknown-lynxos"$UNAME_RELEASE" ++ exit ;; ++ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) ++ echo powerpc-unknown-lynxos"$UNAME_RELEASE" ++ exit ;; ++ SM[BE]S:UNIX_SV:*:*) ++ echo mips-dde-sysv"$UNAME_RELEASE" ++ exit ;; ++ RM*:ReliantUNIX-*:*:*) ++ echo mips-sni-sysv4 ++ exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 +- exit 0 ;; ++ exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` +- echo ${UNAME_MACHINE}-sni-sysv4 ++ echo "$UNAME_MACHINE"-sni-sysv4 + else + echo ns32k-sni-sysv + fi +- exit 0 ;; ++ exit ;; ++ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort ++ # says <Richard.M.Bartel@ccMail.Census.GOV> ++ echo i586-unisys-sysv4 ++ exit ;; ++ *:UNIX_System_V:4*:FTX*) ++ # From Gerald Hewes <hewes@openmarket.com>. ++ # How about differentiating between stratus architectures? -djm ++ echo hppa1.1-stratus-sysv4 ++ exit ;; ++ *:*:*:FTX*) ++ # From seanf@swdc.stratus.com. ++ echo i860-stratus-sysv4 ++ exit ;; ++ i*86:VOS:*:*) ++ # From Paul.Green@stratus.com. ++ echo "$UNAME_MACHINE"-stratus-vos ++ exit ;; ++ *:VOS:*:*) ++ # From Paul.Green@stratus.com. ++ echo hppa1.1-stratus-vos ++ exit ;; + mc68*:A/UX:*:*) +- echo m68k-apple-aux${UNAME_RELEASE} +- exit 0 ;; +- R3000:*System_V*:*:*) ++ echo m68k-apple-aux"$UNAME_RELEASE" ++ exit ;; ++ news*:NEWS-OS:6*:*) ++ echo mips-sony-newsos6 ++ exit ;; ++ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then +- echo mips-nec-sysv${UNAME_RELEASE} ++ echo mips-nec-sysv"$UNAME_RELEASE" + else +- echo mips-unknown-sysv${UNAME_RELEASE} ++ echo mips-unknown-sysv"$UNAME_RELEASE" ++ fi ++ exit ;; ++ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. ++ echo powerpc-be-beos ++ exit ;; ++ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. ++ echo powerpc-apple-beos ++ exit ;; ++ BePC:BeOS:*:*) # BeOS running on Intel PC compatible. ++ echo i586-pc-beos ++ exit ;; ++ BePC:Haiku:*:*) # Haiku running on Intel PC compatible. ++ echo i586-pc-haiku ++ exit ;; ++ x86_64:Haiku:*:*) ++ echo x86_64-unknown-haiku ++ exit ;; ++ SX-4:SUPER-UX:*:*) ++ echo sx4-nec-superux"$UNAME_RELEASE" ++ exit ;; ++ SX-5:SUPER-UX:*:*) ++ echo sx5-nec-superux"$UNAME_RELEASE" ++ exit ;; ++ SX-6:SUPER-UX:*:*) ++ echo sx6-nec-superux"$UNAME_RELEASE" ++ exit ;; ++ SX-7:SUPER-UX:*:*) ++ echo sx7-nec-superux"$UNAME_RELEASE" ++ exit ;; ++ SX-8:SUPER-UX:*:*) ++ echo sx8-nec-superux"$UNAME_RELEASE" ++ exit ;; ++ SX-8R:SUPER-UX:*:*) ++ echo sx8r-nec-superux"$UNAME_RELEASE" ++ exit ;; ++ SX-ACE:SUPER-UX:*:*) ++ echo sxace-nec-superux"$UNAME_RELEASE" ++ exit ;; ++ Power*:Rhapsody:*:*) ++ echo powerpc-apple-rhapsody"$UNAME_RELEASE" ++ exit ;; ++ *:Rhapsody:*:*) ++ echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE" ++ exit ;; ++ *:Darwin:*:*) ++ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown ++ set_cc_for_build ++ if test "$UNAME_PROCESSOR" = unknown ; then ++ UNAME_PROCESSOR=powerpc + fi +- exit 0 ;; ++ if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then ++ if [ "$CC_FOR_BUILD" != no_compiler_found ]; then ++ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ ++ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ ++ grep IS_64BIT_ARCH >/dev/null ++ then ++ case $UNAME_PROCESSOR in ++ i386) UNAME_PROCESSOR=x86_64 ;; ++ powerpc) UNAME_PROCESSOR=powerpc64 ;; ++ esac ++ fi ++ # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc ++ if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ ++ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ ++ grep IS_PPC >/dev/null ++ then ++ UNAME_PROCESSOR=powerpc ++ fi ++ fi ++ elif test "$UNAME_PROCESSOR" = i386 ; then ++ # Avoid executing cc on OS X 10.9, as it ships with a stub ++ # that puts up a graphical alert prompting to install ++ # developer tools. Any system running Mac OS X 10.7 or ++ # later (Darwin 11 and later) is required to have a 64-bit ++ # processor. This is not true of the ARM version of Darwin ++ # that Apple uses in portable devices. ++ UNAME_PROCESSOR=x86_64 ++ fi ++ echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE" ++ exit ;; ++ *:procnto*:*:* | *:QNX:[0123456789]*:*) ++ UNAME_PROCESSOR=`uname -p` ++ if test "$UNAME_PROCESSOR" = x86; then ++ UNAME_PROCESSOR=i386 ++ UNAME_MACHINE=pc ++ fi ++ echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE" ++ exit ;; ++ *:QNX:*:4*) ++ echo i386-pc-qnx ++ exit ;; ++ NEO-*:NONSTOP_KERNEL:*:*) ++ echo neo-tandem-nsk"$UNAME_RELEASE" ++ exit ;; ++ NSE-*:NONSTOP_KERNEL:*:*) ++ echo nse-tandem-nsk"$UNAME_RELEASE" ++ exit ;; ++ NSR-*:NONSTOP_KERNEL:*:*) ++ echo nsr-tandem-nsk"$UNAME_RELEASE" ++ exit ;; ++ NSV-*:NONSTOP_KERNEL:*:*) ++ echo nsv-tandem-nsk"$UNAME_RELEASE" ++ exit ;; ++ NSX-*:NONSTOP_KERNEL:*:*) ++ echo nsx-tandem-nsk"$UNAME_RELEASE" ++ exit ;; ++ *:NonStop-UX:*:*) ++ echo mips-compaq-nonstopux ++ exit ;; ++ BS2000:POSIX*:*:*) ++ echo bs2000-siemens-sysv ++ exit ;; ++ DS/*:UNIX_System_V:*:*) ++ echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE" ++ exit ;; ++ *:Plan9:*:*) ++ # "uname -m" is not consistent, so use $cputype instead. 386 ++ # is converted to i386 for consistency with other x86 ++ # operating systems. ++ # shellcheck disable=SC2154 ++ if test "$cputype" = 386; then ++ UNAME_MACHINE=i386 ++ else ++ UNAME_MACHINE="$cputype" ++ fi ++ echo "$UNAME_MACHINE"-unknown-plan9 ++ exit ;; ++ *:TOPS-10:*:*) ++ echo pdp10-unknown-tops10 ++ exit ;; ++ *:TENEX:*:*) ++ echo pdp10-unknown-tenex ++ exit ;; ++ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) ++ echo pdp10-dec-tops20 ++ exit ;; ++ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) ++ echo pdp10-xkl-tops20 ++ exit ;; ++ *:TOPS-20:*:*) ++ echo pdp10-unknown-tops20 ++ exit ;; ++ *:ITS:*:*) ++ echo pdp10-unknown-its ++ exit ;; ++ SEI:*:*:SEIUX) ++ echo mips-sei-seiux"$UNAME_RELEASE" ++ exit ;; ++ *:DragonFly:*:*) ++ echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" ++ exit ;; ++ *:*VMS:*:*) ++ UNAME_MACHINE=`(uname -p) 2>/dev/null` ++ case "$UNAME_MACHINE" in ++ A*) echo alpha-dec-vms ; exit ;; ++ I*) echo ia64-dec-vms ; exit ;; ++ V*) echo vax-dec-vms ; exit ;; ++ esac ;; ++ *:XENIX:*:SysV) ++ echo i386-pc-xenix ++ exit ;; ++ i*86:skyos:*:*) ++ echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`" ++ exit ;; ++ i*86:rdos:*:*) ++ echo "$UNAME_MACHINE"-pc-rdos ++ exit ;; ++ i*86:AROS:*:*) ++ echo "$UNAME_MACHINE"-pc-aros ++ exit ;; ++ x86_64:VMkernel:*:*) ++ echo "$UNAME_MACHINE"-unknown-esx ++ exit ;; ++ amd64:Isilon\ OneFS:*:*) ++ echo x86_64-unknown-onefs ++ exit ;; ++ *:Unleashed:*:*) ++ echo "$UNAME_MACHINE"-unknown-unleashed"$UNAME_RELEASE" ++ exit ;; + esac + +-#echo '(No uname command or uname output not recognized.)' 1>&2 +-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 +- +-cat >dummy.c <<EOF ++# No uname command or uname output not recognized. ++set_cc_for_build ++cat > "$dummy.c" <<EOF + #ifdef _SEQUENT_ +-# include <sys/types.h> +-# include <sys/utsname.h> ++#include <sys/types.h> ++#include <sys/utsname.h> ++#endif ++#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__) ++#if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__) ++#include <signal.h> ++#if defined(_SIZE_T_) || defined(SIGLOST) ++#include <sys/utsname.h> ++#endif ++#endif + #endif + main () + { +@@ -480,20 +1487,12 @@ main () + #include <sys/param.h> + printf ("m68k-sony-newsos%s\n", + #ifdef NEWSOS4 +- "4" ++ "4" + #else +- "" +-#endif +- ); exit (0); ++ "" + #endif ++ ); exit (0); + #endif +- +-#if defined (__arm) && defined (__acorn) && defined (__unix) +- printf ("arm-acorn-riscix"); exit (0); +-#endif +- +-#if defined (hp300) && !defined (hpux) +- printf ("m68k-hp-bsd\n"); exit (0); + #endif + + #if defined (NeXT) +@@ -502,7 +1501,10 @@ main () + #endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; +- printf ("%s-next-nextstep%s\n", __ARCHITECTURE__, version==2 ? "2" : "3"); ++ if (version < 4) ++ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); ++ else ++ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); + #endif + +@@ -519,7 +1521,7 @@ main () + #endif + + #if defined (__386BSD__) +- printf ("i386-unknown-bsd\n"); exit (0); ++ printf ("i386-pc-bsd\n"); exit (0); + #endif + + #if defined (sequent) +@@ -532,27 +1534,55 @@ main () + #endif + + #if defined (_SEQUENT_) +- struct utsname un; +- +- uname(&un); +- +- if (strncmp(un.version, "V2", 2) == 0) { +- printf ("i386-sequent-ptx2\n"); exit (0); +- } +- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ +- printf ("i386-sequent-ptx1\n"); exit (0); +- } +- printf ("i386-sequent-ptx\n"); exit (0); ++ struct utsname un; + ++ uname(&un); ++ if (strncmp(un.version, "V2", 2) == 0) { ++ printf ("i386-sequent-ptx2\n"); exit (0); ++ } ++ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ ++ printf ("i386-sequent-ptx1\n"); exit (0); ++ } ++ printf ("i386-sequent-ptx\n"); exit (0); + #endif + + #if defined (vax) + #if !defined (ultrix) ++#include <sys/param.h> ++#if defined (BSD) ++#if BSD == 43 ++ printf ("vax-dec-bsd4.3\n"); exit (0); ++#else ++#if BSD == 199006 ++ printf ("vax-dec-bsd4.3reno\n"); exit (0); ++#else ++ printf ("vax-dec-bsd\n"); exit (0); ++#endif ++#endif ++#else + printf ("vax-dec-bsd\n"); exit (0); ++#endif ++#else ++#if defined(_SIZE_T_) || defined(SIGLOST) ++ struct utsname un; ++ uname (&un); ++ printf ("vax-dec-ultrix%s\n", un.release); exit (0); + #else + printf ("vax-dec-ultrix\n"); exit (0); + #endif + #endif ++#endif ++#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__) ++#if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__) ++#if defined(_SIZE_T_) || defined(SIGLOST) ++ struct utsname *un; ++ uname (&un); ++ printf ("mips-dec-ultrix%s\n", un.release); exit (0); ++#else ++ printf ("mips-dec-ultrix\n"); exit (0); ++#endif ++#endif ++#endif + + #if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +@@ -562,39 +1592,67 @@ main () + } + EOF + +-${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0 +-rm -f dummy.c dummy ++$CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null && SYSTEM_NAME=`$dummy` && ++ { echo "$SYSTEM_NAME"; exit; } + + # Apollos put the system type in the environment. ++test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; } + +-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } ++echo "$0: unable to guess system type" >&2 + +-# Convex versions that predate uname can use getsysinfo(1) ++case "$UNAME_MACHINE:$UNAME_SYSTEM" in ++ mips:Linux | mips64:Linux) ++ # If we got here on MIPS GNU/Linux, output extra information. ++ cat >&2 <<EOF + +-if [ -x /usr/convex/getsysinfo ] +-then +- case `getsysinfo -f cpu_type` in +- c1*) +- echo c1-convex-bsd +- exit 0 ;; +- c2*) +- if getsysinfo -f scalar_acc +- then echo c32-convex-bsd +- else echo c2-convex-bsd +- fi +- exit 0 ;; +- c34*) +- echo c34-convex-bsd +- exit 0 ;; +- c38*) +- echo c38-convex-bsd +- exit 0 ;; +- c4*) +- echo c4-convex-bsd +- exit 0 ;; +- esac +-fi ++NOTE: MIPS GNU/Linux systems require a C compiler to fully recognize ++the system type. Please install a C compiler and try again. ++EOF ++ ;; ++esac + +-#echo '(Unable to guess system type)' 1>&2 ++cat >&2 <<EOF ++ ++This script (version $timestamp), has failed to recognize the ++operating system you are using. If your script is old, overwrite *all* ++copies of config.guess and config.sub with the latest versions from: ++ ++ https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess ++and ++ https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub ++ ++If $0 has already been updated, send the following data and any ++information you think might be pertinent to config-patches@gnu.org to ++provide the necessary information to handle your system. ++ ++config.guess timestamp = $timestamp ++ ++uname -m = `(uname -m) 2>/dev/null || echo unknown` ++uname -r = `(uname -r) 2>/dev/null || echo unknown` ++uname -s = `(uname -s) 2>/dev/null || echo unknown` ++uname -v = `(uname -v) 2>/dev/null || echo unknown` ++ ++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` ++/bin/uname -X = `(/bin/uname -X) 2>/dev/null` ++ ++hostinfo = `(hostinfo) 2>/dev/null` ++/bin/universe = `(/bin/universe) 2>/dev/null` ++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` ++/bin/arch = `(/bin/arch) 2>/dev/null` ++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` ++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` ++ ++UNAME_MACHINE = "$UNAME_MACHINE" ++UNAME_RELEASE = "$UNAME_RELEASE" ++UNAME_SYSTEM = "$UNAME_SYSTEM" ++UNAME_VERSION = "$UNAME_VERSION" ++EOF + + exit 1 ++ ++# Local variables: ++# eval: (add-hook 'before-save-hook 'time-stamp) ++# time-stamp-start: "timestamp='" ++# time-stamp-format: "%:y-%02m-%02d" ++# time-stamp-end: "'" ++# End: +diff -uprN clean/lrzsz-0.12.20/config.h.in lrzsz-0.12.20/config.h.in +--- clean/lrzsz-0.12.20/config.h.in 1998-12-30 00:37:27.000000000 +0000 ++++ lrzsz-0.12.20/config.h.in 2019-11-26 11:37:45.000000000 +0000 +@@ -1,82 +1,4 @@ +-/* config.h.in. Generated automatically from configure.in by autoheader. */ +- +-/* Define if on AIX 3. +- System headers sometimes define this. +- We just want to avoid a redefinition error message. */ +-#ifndef _ALL_SOURCE +-#undef _ALL_SOURCE +-#endif +- +-/* Define if using alloca.c. */ +-#undef C_ALLOCA +- +-/* Define to empty if the keyword does not work. */ +-#undef const +- +-/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems. +- This function is required for alloca.c support on those systems. */ +-#undef CRAY_STACKSEG_END +- +-/* Define if you have alloca, as a function or macro. */ +-#undef HAVE_ALLOCA +- +-/* Define if you have <alloca.h> and it should be used (not on Ultrix). */ +-#undef HAVE_ALLOCA_H +- +-/* Define if you have a working `mmap' system call. */ +-#undef HAVE_MMAP +- +-/* Define if your struct stat has st_rdev. */ +-#undef HAVE_ST_RDEV +- +-/* Define as __inline if that's what the C compiler calls it. */ +-#undef inline +- +-/* Define if on MINIX. */ +-#undef _MINIX +- +-/* Define to `int' if <sys/types.h> doesn't define. */ +-#undef mode_t +- +-/* Define to `long' if <sys/types.h> doesn't define. */ +-#undef off_t +- +-/* Define if the system does not provide POSIX.1 features except +- with this defined. */ +-#undef _POSIX_1_SOURCE +- +-/* Define if you need to in order for stat and other things to work. */ +-#undef _POSIX_SOURCE +- +-/* Define as the return type of signal handlers (int or void). */ +-#undef RETSIGTYPE +- +-/* Define if the setvbuf function takes the buffering type as its second +- argument and the buffer pointer as the third, as on System V +- before release 3. */ +-#undef SETVBUF_REVERSED +- +-/* Define to `unsigned' if <sys/types.h> doesn't define. */ +-#undef size_t +- +-/* If using the C implementation of alloca, define if you know the +- direction of stack growth for your system; otherwise it will be +- automatically deduced at run-time. +- STACK_DIRECTION > 0 => grows toward higher addresses +- STACK_DIRECTION < 0 => grows toward lower addresses +- STACK_DIRECTION = 0 => direction of growth unknown +- */ +-#undef STACK_DIRECTION +- +-/* Define if you have the ANSI C header files. */ +-#undef STDC_HEADERS +- +-/* Define if you can safely include both <sys/time.h> and <time.h>. */ +-#undef TIME_WITH_SYS_TIME +- +-/* Define if your <sys/time.h> declares struct tm. */ +-#undef TM_IN_SYS_TIME +- ++/* config.h.in. Generated from configure.in by autoheader. */ + /* define this if you have a reliable ftime function */ + #undef HAVE_FTIME + +@@ -150,188 +72,303 @@ + /* define this if you headers conflict */ + #undef SYS_TIME_WITHOUT_SYS_SELECT + +-/* Define if you have the __argz_count function. */ +-#undef HAVE___ARGZ_COUNT ++/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP ++ systems. This function is required for `alloca.c' support on those systems. ++ */ ++#undef CRAY_STACKSEG_END + +-/* Define if you have the __argz_next function. */ +-#undef HAVE___ARGZ_NEXT ++/* Define to 1 if using `alloca.c'. */ ++#undef C_ALLOCA + +-/* Define if you have the __argz_stringify function. */ +-#undef HAVE___ARGZ_STRINGIFY ++/* Define to 1 if translation of program messages to the user's native ++ language is requested. */ ++#undef ENABLE_NLS + +-/* Define if you have the dcgettext function. */ ++/* Define to 1 if you have `alloca', as a function or macro. */ ++#undef HAVE_ALLOCA ++ ++/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix). ++ */ ++#undef HAVE_ALLOCA_H ++ ++/* Define to 1 if you have the <arpa/inet.h> header file. */ ++#undef HAVE_ARPA_INET_H ++ ++/* Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the ++ CoreFoundation framework. */ ++#undef HAVE_CFLOCALECOPYCURRENT ++ ++/* Define to 1 if you have the Mac OS X function ++ CFLocaleCopyPreferredLanguages in the CoreFoundation framework. */ ++#undef HAVE_CFLOCALECOPYPREFERREDLANGUAGES ++ ++/* Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in ++ the CoreFoundation framework. */ ++#undef HAVE_CFPREFERENCESCOPYAPPVALUE ++ ++/* Define if the GNU dcgettext() function is already present or preinstalled. ++ */ + #undef HAVE_DCGETTEXT + +-/* Define if you have the getcwd function. */ +-#undef HAVE_GETCWD ++/* Define to 1 if you have the <fcntl.h> header file. */ ++#undef HAVE_FCNTL_H + +-/* Define if you have the getpagesize function. */ ++/* Define to 1 if you have the `getpagesize' function. */ + #undef HAVE_GETPAGESIZE + +-/* Define if you have the gettimeofday function. */ ++/* Define if the GNU gettext() function is already present or preinstalled. */ ++#undef HAVE_GETTEXT ++ ++/* Define to 1 if you have the `gettimeofday' function. */ + #undef HAVE_GETTIMEOFDAY + +-/* Define if you have the memcpy function. */ ++/* Define if you have the iconv() function and it works. */ ++#undef HAVE_ICONV ++ ++/* Define to 1 if you have the <inttypes.h> header file. */ ++#undef HAVE_INTTYPES_H ++ ++/* Define to 1 if you have the `be' library (-lbe). */ ++#undef HAVE_LIBBE ++ ++/* Define to 1 if you have the `nsl' library (-lnsl). */ ++#undef HAVE_LIBNSL ++ ++/* Define to 1 if you have the `socket' library (-lsocket). */ ++#undef HAVE_LIBSOCKET ++ ++/* Define to 1 if you have the <limits.h> header file. */ ++#undef HAVE_LIMITS_H ++ ++/* Define to 1 if you have the `memcpy' function. */ + #undef HAVE_MEMCPY + +-/* Define if you have the mkdir function. */ ++/* Define to 1 if you have the <memory.h> header file. */ ++#undef HAVE_MEMORY_H ++ ++/* Define to 1 if you have the `mkdir' function. */ + #undef HAVE_MKDIR + +-/* Define if you have the mktime function. */ ++/* Define to 1 if you have the `mktime' function. */ + #undef HAVE_MKTIME + +-/* Define if you have the munmap function. */ +-#undef HAVE_MUNMAP +- +-/* Define if you have the putenv function. */ +-#undef HAVE_PUTENV ++/* Define to 1 if you have a working `mmap' system call. */ ++#undef HAVE_MMAP + +-/* Define if you have the rdchk function. */ ++/* Define to 1 if you have the `rdchk' function. */ + #undef HAVE_RDCHK + +-/* Define if you have the select function. */ ++/* Define to 1 if you have the `select' function. */ + #undef HAVE_SELECT + +-/* Define if you have the setenv function. */ +-#undef HAVE_SETENV +- +-/* Define if you have the setlocale function. */ +-#undef HAVE_SETLOCALE +- +-/* Define if you have the settimeofday function. */ ++/* Define to 1 if you have the `settimeofday' function. */ + #undef HAVE_SETTIMEOFDAY + +-/* Define if you have the siginterrupt function. */ ++/* Define to 1 if you have the <sgtty.h> header file. */ ++#undef HAVE_SGTTY_H ++ ++/* Define to 1 if you have the `siginterrupt' function. */ + #undef HAVE_SIGINTERRUPT + +-/* Define if you have the stpcpy function. */ +-#undef HAVE_STPCPY ++/* Define to 1 if you have the <stdint.h> header file. */ ++#undef HAVE_STDINT_H + +-/* Define if you have the strcasecmp function. */ +-#undef HAVE_STRCASECMP ++/* Define to 1 if you have the <stdlib.h> header file. */ ++#undef HAVE_STDLIB_H ++ ++/* Define to 1 if you have the `stpcpy' function. */ ++#undef HAVE_STPCPY + +-/* Define if you have the strchr function. */ ++/* Define to 1 if you have the `strchr' function. */ + #undef HAVE_STRCHR + +-/* Define if you have the strdup function. */ ++/* Define to 1 if you have the `strdup' function. */ + #undef HAVE_STRDUP + +-/* Define if you have the strerror function. */ ++/* Define to 1 if you have the `strerror' function. */ + #undef HAVE_STRERROR + +-/* Define if you have the strftime function. */ ++/* Define to 1 if you have the `strftime' function. */ + #undef HAVE_STRFTIME + +-/* Define if you have the strpbrk function. */ ++/* Define to 1 if you have the <strings.h> header file. */ ++#undef HAVE_STRINGS_H ++ ++/* Define to 1 if you have the <string.h> header file. */ ++#undef HAVE_STRING_H ++ ++/* Define to 1 if you have the `strpbrk' function. */ + #undef HAVE_STRPBRK + +-/* Define if you have the strstr function. */ ++/* Define to 1 if you have the `strstr' function. */ + #undef HAVE_STRSTR + +-/* Define if you have the strtol function. */ ++/* Define to 1 if you have the `strtol' function. */ + #undef HAVE_STRTOL + +-/* Define if you have the strtoul function. */ ++/* Define to 1 if you have the `strtoul' function. */ + #undef HAVE_STRTOUL + +-/* Define if you have the syslog function. */ ++/* Define to 1 if `st_rdev' is a member of `struct stat'. */ ++#undef HAVE_STRUCT_STAT_ST_RDEV ++ ++/* Define to 1 if your `struct stat' has `st_rdev'. Deprecated, use ++ `HAVE_STRUCT_STAT_ST_RDEV' instead. */ ++#undef HAVE_ST_RDEV ++ ++/* Define to 1 if you have the `syslog' function. */ + #undef HAVE_SYSLOG + +-/* Define if you have the times function. */ +-#undef HAVE_TIMES ++/* Define to 1 if you have the <syslog.h> header file. */ ++#undef HAVE_SYSLOG_H + +-/* Define if you have the utime function. */ +-#undef HAVE_UTIME ++/* Define to 1 if you have the <sys/ioctl.h> header file. */ ++#undef HAVE_SYS_IOCTL_H + +-/* Define if you have the vasprintf function. */ +-#undef HAVE_VASPRINTF ++/* Define to 1 if you have the <sys/mman.h> header file. */ ++#undef HAVE_SYS_MMAN_H + +-/* Define if you have the vprintf function. */ +-#undef HAVE_VPRINTF ++/* Define to 1 if you have the <sys/param.h> header file. */ ++#undef HAVE_SYS_PARAM_H + +-/* Define if you have the <argz.h> header file. */ +-#undef HAVE_ARGZ_H ++/* Define to 1 if you have the <sys/select.h> header file. */ ++#undef HAVE_SYS_SELECT_H + +-/* Define if you have the <arpa/inet.h> header file. */ +-#undef HAVE_ARPA_INET_H ++/* Define to 1 if you have the <sys/stat.h> header file. */ ++#undef HAVE_SYS_STAT_H + +-/* Define if you have the <fcntl.h> header file. */ +-#undef HAVE_FCNTL_H ++/* Define to 1 if you have the <sys/syslog.h> header file. */ ++#undef HAVE_SYS_SYSLOG_H + +-/* Define if you have the <limits.h> header file. */ +-#undef HAVE_LIMITS_H ++/* Define to 1 if you have the <sys/termios.h> header file. */ ++#undef HAVE_SYS_TERMIOS_H + +-/* Define if you have the <locale.h> header file. */ +-#undef HAVE_LOCALE_H ++/* Define to 1 if you have the <sys/termio.h> header file. */ ++#undef HAVE_SYS_TERMIO_H + +-/* Define if you have the <malloc.h> header file. */ +-#undef HAVE_MALLOC_H ++/* Define to 1 if you have the <sys/times.h> header file. */ ++#undef HAVE_SYS_TIMES_H + +-/* Define if you have the <nl_types.h> header file. */ +-#undef HAVE_NL_TYPES_H ++/* Define to 1 if you have the <sys/time.h> header file. */ ++#undef HAVE_SYS_TIME_H + +-/* Define if you have the <sgtty.h> header file. */ +-#undef HAVE_SGTTY_H ++/* Define to 1 if you have the <sys/types.h> header file. */ ++#undef HAVE_SYS_TYPES_H + +-/* Define if you have the <string.h> header file. */ +-#undef HAVE_STRING_H ++/* Define to 1 if you have the <termios.h> header file. */ ++#undef HAVE_TERMIOS_H + +-/* Define if you have the <strings.h> header file. */ +-#undef HAVE_STRINGS_H ++/* Define to 1 if you have the <termio.h> header file. */ ++#undef HAVE_TERMIO_H + +-/* Define if you have the <sys/ioctl.h> header file. */ +-#undef HAVE_SYS_IOCTL_H ++/* Define to 1 if you have the `times' function. */ ++#undef HAVE_TIMES + +-/* Define if you have the <sys/mman.h> header file. */ +-#undef HAVE_SYS_MMAN_H ++/* Define to 1 if you have the <unistd.h> header file. */ ++#undef HAVE_UNISTD_H + +-/* Define if you have the <sys/param.h> header file. */ +-#undef HAVE_SYS_PARAM_H ++/* Define to 1 if you have the `utime' function. */ ++#undef HAVE_UTIME + +-/* Define if you have the <sys/select.h> header file. */ +-#undef HAVE_SYS_SELECT_H ++/* Define to 1 if you have the <utime.h> header file. */ ++#undef HAVE_UTIME_H + +-/* Define if you have the <sys/syslog.h> header file. */ +-#undef HAVE_SYS_SYSLOG_H ++/* Define to 1 if you have the `vasprintf' function. */ ++#undef HAVE_VASPRINTF + +-/* Define if you have the <sys/termio.h> header file. */ +-#undef HAVE_SYS_TERMIO_H ++/* Define to 1 if you have the `vprintf' function. */ ++#undef HAVE_VPRINTF + +-/* Define if you have the <sys/termios.h> header file. */ +-#undef HAVE_SYS_TERMIOS_H ++/* Name of package */ ++#undef PACKAGE + +-/* Define if you have the <sys/time.h> header file. */ +-#undef HAVE_SYS_TIME_H ++/* Define to the address where bug reports for this package should be sent. */ ++#undef PACKAGE_BUGREPORT + +-/* Define if you have the <sys/times.h> header file. */ +-#undef HAVE_SYS_TIMES_H ++/* Define to the full name of this package. */ ++#undef PACKAGE_NAME + +-/* Define if you have the <syslog.h> header file. */ +-#undef HAVE_SYSLOG_H ++/* Define to the full name and version of this package. */ ++#undef PACKAGE_STRING + +-/* Define if you have the <termio.h> header file. */ +-#undef HAVE_TERMIO_H ++/* Define to the one symbol short name of this package. */ ++#undef PACKAGE_TARNAME + +-/* Define if you have the <termios.h> header file. */ +-#undef HAVE_TERMIOS_H ++/* Define to the home page for this package. */ ++#undef PACKAGE_URL + +-/* Define if you have the <unistd.h> header file. */ +-#undef HAVE_UNISTD_H ++/* Define to the version of this package. */ ++#undef PACKAGE_VERSION + +-/* Define if you have the <utime.h> header file. */ +-#undef HAVE_UTIME_H ++/* Define as the return type of signal handlers (`int' or `void'). */ ++#undef RETSIGTYPE + +-/* Define if you have the <values.h> header file. */ +-#undef HAVE_VALUES_H ++/* If using the C implementation of alloca, define if you know the ++ direction of stack growth for your system; otherwise it will be ++ automatically deduced at runtime. ++ STACK_DIRECTION > 0 => grows toward higher addresses ++ STACK_DIRECTION < 0 => grows toward lower addresses ++ STACK_DIRECTION = 0 => direction of growth unknown */ ++#undef STACK_DIRECTION + +-/* Define if you have the be library (-lbe). */ +-#undef HAVE_LIBBE ++/* Define to 1 if you have the ANSI C header files. */ ++#undef STDC_HEADERS + +-/* Define if you have the i library (-li). */ +-#undef HAVE_LIBI ++/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */ ++#undef TIME_WITH_SYS_TIME + +-/* Define if you have the nsl library (-lnsl). */ +-#undef HAVE_LIBNSL ++/* Define to 1 if your <sys/time.h> declares `struct tm'. */ ++#undef TM_IN_SYS_TIME + +-/* Define if you have the socket library (-lsocket). */ +-#undef HAVE_LIBSOCKET ++/* Enable extensions on AIX 3, Interix. */ ++#ifndef _ALL_SOURCE ++# undef _ALL_SOURCE ++#endif ++/* Enable GNU extensions on systems that have them. */ ++#ifndef _GNU_SOURCE ++# undef _GNU_SOURCE ++#endif ++/* Enable threading extensions on Solaris. */ ++#ifndef _POSIX_PTHREAD_SEMANTICS ++# undef _POSIX_PTHREAD_SEMANTICS ++#endif ++/* Enable extensions on HP NonStop. */ ++#ifndef _TANDEM_SOURCE ++# undef _TANDEM_SOURCE ++#endif ++/* Enable general extensions on Solaris. */ ++#ifndef __EXTENSIONS__ ++# undef __EXTENSIONS__ ++#endif ++ ++ ++/* Version number of package */ ++#undef VERSION ++ ++/* Define to 1 if on MINIX. */ ++#undef _MINIX ++ ++/* Define to 2 if the system does not provide POSIX.1 features except with ++ this defined. */ ++#undef _POSIX_1_SOURCE ++ ++/* Define to 1 if you need to in order for `stat' and other things to work. */ ++#undef _POSIX_SOURCE ++ ++/* Define to empty if `const' does not conform to ANSI C. */ ++#undef const ++ ++/* Define to `__inline__' or `__inline' if that's what the C compiler ++ calls it, or to nothing if 'inline' is not supported under any name. */ ++#ifndef __cplusplus ++#undef inline ++#endif ++ ++/* Define to `int' if <sys/types.h> does not define. */ ++#undef mode_t ++ ++/* Define to `long int' if <sys/types.h> does not define. */ ++#undef off_t ++ ++/* Define to `unsigned int' if <sys/types.h> does not define. */ ++#undef size_t +diff -uprN clean/lrzsz-0.12.20/config.rpath lrzsz-0.12.20/config.rpath +--- clean/lrzsz-0.12.20/config.rpath 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/config.rpath 2019-11-25 18:21:17.000000000 +0000 +@@ -0,0 +1,684 @@ ++#! /bin/sh ++# Output a system dependent set of variables, describing how to set the ++# run time search path of shared libraries in an executable. ++# ++# Copyright 1996-2019 Free Software Foundation, Inc. ++# Taken from GNU libtool, 2001 ++# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++# ++# The first argument passed to this file is the canonical host specification, ++# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM ++# or ++# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM ++# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld ++# should be set by the caller. ++# ++# The set of defined variables is at the end of this script. ++ ++# Known limitations: ++# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer ++# than 256 bytes, otherwise the compiler driver will dump core. The only ++# known workaround is to choose shorter directory names for the build ++# directory and/or the installation directory. ++ ++# All known linkers require a '.a' archive for static linking (except MSVC, ++# which needs '.lib'). ++libext=a ++shrext=.so ++ ++host="$1" ++host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` ++host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` ++host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ ++# Code taken from libtool.m4's _LT_CC_BASENAME. ++ ++for cc_temp in $CC""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` ++ ++# Code taken from libtool.m4's _LT_COMPILER_PIC. ++ ++wl= ++if test "$GCC" = yes; then ++ wl='-Wl,' ++else ++ case "$host_os" in ++ aix*) ++ wl='-Wl,' ++ ;; ++ mingw* | cygwin* | pw32* | os2* | cegcc*) ++ ;; ++ hpux9* | hpux10* | hpux11*) ++ wl='-Wl,' ++ ;; ++ irix5* | irix6* | nonstopux*) ++ wl='-Wl,' ++ ;; ++ linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ case $cc_basename in ++ ecc*) ++ wl='-Wl,' ++ ;; ++ icc* | ifort*) ++ wl='-Wl,' ++ ;; ++ lf95*) ++ wl='-Wl,' ++ ;; ++ nagfor*) ++ wl='-Wl,-Wl,,' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) ++ wl='-Wl,' ++ ;; ++ ccc*) ++ wl='-Wl,' ++ ;; ++ xl* | bgxl* | bgf* | mpixl*) ++ wl='-Wl,' ++ ;; ++ como) ++ wl='-lopt=' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ F* | *Sun*Fortran*) ++ wl= ++ ;; ++ *Sun\ C*) ++ wl='-Wl,' ++ ;; ++ esac ++ ;; ++ esac ++ ;; ++ newsos6) ++ ;; ++ *nto* | *qnx*) ++ ;; ++ osf3* | osf4* | osf5*) ++ wl='-Wl,' ++ ;; ++ rdos*) ++ ;; ++ solaris*) ++ case $cc_basename in ++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) ++ wl='-Qoption ld ' ++ ;; ++ *) ++ wl='-Wl,' ++ ;; ++ esac ++ ;; ++ sunos4*) ++ wl='-Qoption ld ' ++ ;; ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ wl='-Wl,' ++ ;; ++ sysv4*MP*) ++ ;; ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ wl='-Wl,' ++ ;; ++ unicos*) ++ wl='-Wl,' ++ ;; ++ uts4*) ++ ;; ++ esac ++fi ++ ++# Code taken from libtool.m4's _LT_LINKER_SHLIBS. ++ ++hardcode_libdir_flag_spec= ++hardcode_libdir_separator= ++hardcode_direct=no ++hardcode_minus_L=no ++ ++case "$host_os" in ++ cygwin* | mingw* | pw32* | cegcc*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++esac ++ ++ld_shlibs=yes ++if test "$with_gnu_ld" = yes; then ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ # Unlike libtool, we use -rpath here, not --rpath, since the documented ++ # option of GNU ld is called -rpath, not --rpath. ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ case "$host_os" in ++ aix[3-9]*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ ld_shlibs=no ++ fi ++ ;; ++ amigaos*) ++ case "$host_cpu" in ++ powerpc) ++ ;; ++ m68k) ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ;; ++ esac ++ ;; ++ beos*) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ : ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ cygwin* | mingw* | pw32* | cegcc*) ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ hardcode_libdir_flag_spec='-L$libdir' ++ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then ++ : ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ haiku*) ++ ;; ++ interix[3-9]*) ++ hardcode_direct=no ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ ;; ++ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ : ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ netbsd*) ++ ;; ++ solaris*) ++ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ++ ld_shlibs=no ++ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ : ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs=no ++ ;; ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac ++ ;; ++ sunos4*) ++ hardcode_direct=yes ++ ;; ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ : ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac ++ if test "$ld_shlibs" = no; then ++ hardcode_libdir_flag_spec= ++ fi ++else ++ case "$host_os" in ++ aix3*) ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ hardcode_minus_L=yes ++ if test "$GCC" = yes; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ hardcode_direct=unsupported ++ fi ++ ;; ++ aix[4-9]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ else ++ aix_use_runtimelinking=no ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac ++ fi ++ hardcode_direct=yes ++ hardcode_libdir_separator=':' ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && \ ++ strings "$collect2name" | grep resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ hardcode_direct=unsupported ++ hardcode_minus_L=yes ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_libdir_separator= ++ fi ++ ;; ++ esac ++ fi ++ # Begin _LT_AC_SYS_LIBPATH_AIX. ++ echo 'int main () { return 0; }' > conftest.c ++ ${CC} ${LDFLAGS} conftest.c -o conftest ++ aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++ if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++ fi ++ if test -z "$aix_libpath"; then ++ aix_libpath="/usr/lib:/lib" ++ fi ++ rm -f conftest.c conftest ++ # End _LT_AC_SYS_LIBPATH_AIX. ++ if test "$aix_use_runtimelinking" = yes; then ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ else ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' ++ else ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ fi ++ fi ++ ;; ++ amigaos*) ++ case "$host_cpu" in ++ powerpc) ++ ;; ++ m68k) ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ;; ++ esac ++ ;; ++ bsdi[45]*) ++ ;; ++ cygwin* | mingw* | pw32* | cegcc*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ hardcode_libdir_flag_spec=' ' ++ libext=lib ++ ;; ++ darwin* | rhapsody*) ++ hardcode_direct=no ++ if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then ++ : ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ dgux*) ++ hardcode_libdir_flag_spec='-L$libdir' ++ ;; ++ freebsd2.[01]*) ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ ;; ++ freebsd* | dragonfly*) ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ ;; ++ hpux9*) ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ ;; ++ hpux10*) ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ fi ++ ;; ++ hpux11*) ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_direct=no ++ ;; ++ *) ++ hardcode_direct=yes ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ ;; ++ esac ++ fi ++ ;; ++ irix5* | irix6* | nonstopux*) ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ;; ++ netbsd*) ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ ;; ++ newsos6) ++ hardcode_direct=yes ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ;; ++ *nto* | *qnx*) ++ ;; ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ hardcode_direct=yes ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ else ++ case "$host_os" in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ hardcode_libdir_flag_spec='-R$libdir' ++ ;; ++ *) ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ os2*) ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ;; ++ osf3*) ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ;; ++ osf4* | osf5*) ++ if test "$GCC" = yes; then ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ else ++ # Both cc and cxx compiler support -rpath directly ++ hardcode_libdir_flag_spec='-rpath $libdir' ++ fi ++ hardcode_libdir_separator=: ++ ;; ++ solaris*) ++ hardcode_libdir_flag_spec='-R$libdir' ++ ;; ++ sunos4*) ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ ;; ++ sysv4) ++ case $host_vendor in ++ sni) ++ hardcode_direct=yes # is this really true??? ++ ;; ++ siemens) ++ hardcode_direct=no ++ ;; ++ motorola) ++ hardcode_direct=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ ;; ++ sysv4.3*) ++ ;; ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ ld_shlibs=yes ++ fi ++ ;; ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ++ ;; ++ sysv5* | sco3.2v5* | sco5v6*) ++ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ hardcode_libdir_separator=':' ++ ;; ++ uts4*) ++ hardcode_libdir_flag_spec='-L$libdir' ++ ;; ++ *) ++ ld_shlibs=no ++ ;; ++ esac ++fi ++ ++# Check dynamic linker characteristics ++# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. ++# Unlike libtool.m4, here we don't care about _all_ names of the library, but ++# only about the one the linker finds when passed -lNAME. This is the last ++# element of library_names_spec in libtool.m4, or possibly two of them if the ++# linker has special search rules. ++library_names_spec= # the last element of library_names_spec in libtool.m4 ++libname_spec='lib$name' ++case "$host_os" in ++ aix3*) ++ library_names_spec='$libname.a' ++ ;; ++ aix[4-9]*) ++ library_names_spec='$libname$shrext' ++ ;; ++ amigaos*) ++ case "$host_cpu" in ++ powerpc*) ++ library_names_spec='$libname$shrext' ;; ++ m68k) ++ library_names_spec='$libname.a' ;; ++ esac ++ ;; ++ beos*) ++ library_names_spec='$libname$shrext' ++ ;; ++ bsdi[45]*) ++ library_names_spec='$libname$shrext' ++ ;; ++ cygwin* | mingw* | pw32* | cegcc*) ++ shrext=.dll ++ library_names_spec='$libname.dll.a $libname.lib' ++ ;; ++ darwin* | rhapsody*) ++ shrext=.dylib ++ library_names_spec='$libname$shrext' ++ ;; ++ dgux*) ++ library_names_spec='$libname$shrext' ++ ;; ++ freebsd[23].*) ++ library_names_spec='$libname$shrext$versuffix' ++ ;; ++ freebsd* | dragonfly*) ++ library_names_spec='$libname$shrext' ++ ;; ++ gnu*) ++ library_names_spec='$libname$shrext' ++ ;; ++ haiku*) ++ library_names_spec='$libname$shrext' ++ ;; ++ hpux9* | hpux10* | hpux11*) ++ case $host_cpu in ++ ia64*) ++ shrext=.so ++ ;; ++ hppa*64*) ++ shrext=.sl ++ ;; ++ *) ++ shrext=.sl ++ ;; ++ esac ++ library_names_spec='$libname$shrext' ++ ;; ++ interix[3-9]*) ++ library_names_spec='$libname$shrext' ++ ;; ++ irix5* | irix6* | nonstopux*) ++ library_names_spec='$libname$shrext' ++ case "$host_os" in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; ++ *) libsuff= shlibsuff= ;; ++ esac ++ ;; ++ esac ++ ;; ++ linux*oldld* | linux*aout* | linux*coff*) ++ ;; ++ linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ library_names_spec='$libname$shrext' ++ ;; ++ knetbsd*-gnu) ++ library_names_spec='$libname$shrext' ++ ;; ++ netbsd*) ++ library_names_spec='$libname$shrext' ++ ;; ++ newsos6) ++ library_names_spec='$libname$shrext' ++ ;; ++ *nto* | *qnx*) ++ library_names_spec='$libname$shrext' ++ ;; ++ openbsd*) ++ library_names_spec='$libname$shrext$versuffix' ++ ;; ++ os2*) ++ libname_spec='$name' ++ shrext=.dll ++ library_names_spec='$libname.a' ++ ;; ++ osf3* | osf4* | osf5*) ++ library_names_spec='$libname$shrext' ++ ;; ++ rdos*) ++ ;; ++ solaris*) ++ library_names_spec='$libname$shrext' ++ ;; ++ sunos4*) ++ library_names_spec='$libname$shrext$versuffix' ++ ;; ++ sysv4 | sysv4.3*) ++ library_names_spec='$libname$shrext' ++ ;; ++ sysv4*MP*) ++ library_names_spec='$libname$shrext' ++ ;; ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ library_names_spec='$libname$shrext' ++ ;; ++ tpf*) ++ library_names_spec='$libname$shrext' ++ ;; ++ uts4*) ++ library_names_spec='$libname$shrext' ++ ;; ++esac ++ ++sed_quote_subst='s/\(["`$\\]\)/\\\1/g' ++escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` ++shlibext=`echo "$shrext" | sed -e 's,^\.,,'` ++escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` ++escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` ++escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` ++ ++LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF ++ ++# How to pass a linker flag through the compiler. ++wl="$escaped_wl" ++ ++# Static library suffix (normally "a"). ++libext="$libext" ++ ++# Shared library suffix (normally "so"). ++shlibext="$shlibext" ++ ++# Format of library name prefix. ++libname_spec="$escaped_libname_spec" ++ ++# Library names that the linker finds when passed -lNAME. ++library_names_spec="$escaped_library_names_spec" ++ ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec" ++ ++# Whether we need a single -rpath flag with a separated argument. ++hardcode_libdir_separator="$hardcode_libdir_separator" ++ ++# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the ++# resulting binary. ++hardcode_direct="$hardcode_direct" ++ ++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the ++# resulting binary. ++hardcode_minus_L="$hardcode_minus_L" ++ ++EOF +diff -uprN clean/lrzsz-0.12.20/config.sub lrzsz-0.12.20/config.sub +--- clean/lrzsz-0.12.20/config.sub 1998-04-26 14:20:59.000000000 +0100 ++++ lrzsz-0.12.20/config.sub 2019-11-26 11:37:46.000000000 +0000 +@@ -1,35 +1,40 @@ + #! /bin/sh +-# Configuration validation subroutine script, version 1.1. +-# Copyright (C) 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. +-# This file is (in principle) common to ALL GNU software. +-# The presence of a machine in this file suggests that SOME GNU software +-# can handle that machine. It does not imply ALL GNU software can. +-# +-# This file is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or ++# Configuration validation subroutine script. ++# Copyright 1992-2019 Free Software Foundation, Inc. ++ ++timestamp='2019-01-05' ++ ++# This file is free software; you can redistribute it and/or modify it ++# under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 3 of the License, or + # (at your option) any later version. + # +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++# This program is distributed in the hope that it will be useful, but ++# WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# General Public License for more details. + # + # You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, +-# Boston, MA 02111-1307, USA. +- ++# along with this program; if not, see <https://www.gnu.org/licenses/>. ++# + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. ++# the same distribution terms that you use for the rest of that ++# program. This Exception is an additional permission under section 7 ++# of the GNU General Public License, version 3 ("GPLv3"). ++ + ++# Please send patches to <config-patches@gnu.org>. ++# + # Configuration subroutine to validate and canonicalize a configuration type. + # Supply the specified configuration type as an argument. + # If it is invalid, we print an error message on stderr and exit with code 1. + # Otherwise, we print the canonical config type on stdout and succeed. + ++# You can get the latest version of this script from: ++# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub ++ + # This file is supposed to be the same for all GNU packages + # and recognize all the CPU types, system types and aliases + # that are meaningful with *any* GNU software. +@@ -41,570 +46,1231 @@ + # The goal of this file is to map all the various variations of a given + # machine specification into a single specification in the form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM ++# or in some cases, the newer four-part form: ++# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM + # It is wrong to echo any other type of specification. + +-if [ x$1 = x ] +-then +- echo Configuration name missing. 1>&2 +- echo "Usage: $0 CPU-MFR-OPSYS" 1>&2 +- echo "or $0 ALIAS" 1>&2 +- echo where ALIAS is a recognized configuration type. 1>&2 +- exit 1 +-fi ++me=`echo "$0" | sed -e 's,.*/,,'` + +-# First pass through any local machine types. +-case $1 in +- *local*) +- echo $1 +- exit 0 +- ;; +- *) +- ;; ++usage="\ ++Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS ++ ++Canonicalize a configuration name. ++ ++Options: ++ -h, --help print this help, then exit ++ -t, --time-stamp print date of last modification, then exit ++ -v, --version print version number, then exit ++ ++Report bugs and patches to <config-patches@gnu.org>." ++ ++version="\ ++GNU config.sub ($timestamp) ++ ++Copyright 1992-2019 Free Software Foundation, Inc. ++ ++This is free software; see the source for copying conditions. There is NO ++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." ++ ++help=" ++Try \`$me --help' for more information." ++ ++# Parse command line ++while test $# -gt 0 ; do ++ case $1 in ++ --time-stamp | --time* | -t ) ++ echo "$timestamp" ; exit ;; ++ --version | -v ) ++ echo "$version" ; exit ;; ++ --help | --h* | -h ) ++ echo "$usage"; exit ;; ++ -- ) # Stop option processing ++ shift; break ;; ++ - ) # Use stdin as input. ++ break ;; ++ -* ) ++ echo "$me: invalid option $1$help" >&2 ++ exit 1 ;; ++ ++ *local*) ++ # First pass through any local machine types. ++ echo "$1" ++ exit ;; ++ ++ * ) ++ break ;; ++ esac ++done ++ ++case $# in ++ 0) echo "$me: missing argument$help" >&2 ++ exit 1;; ++ 1) ;; ++ *) echo "$me: too many arguments$help" >&2 ++ exit 1;; + esac + +-# Separate what the user gave into CPU-COMPANY and OS (if any). +-basic_machine=`echo $1 | sed 's/-[^-]*$//'` +-if [ $basic_machine != $1 ] +-then os=`echo $1 | sed 's/.*-/-/'` +-else os=; fi +- +-### Let's recognize common machines as not being operating systems so +-### that things like config.sub decstation-3100 work. We also +-### recognize some manufacturers as not being operating systems, so we +-### can provide default operating systems below. +-case $os in +- -sun*os*) +- # Prevent following clause from handling this invalid input. +- ;; +- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ +- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ +- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ +- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ +- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ +- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp ) +- os= +- basic_machine=$1 +- ;; +- -hiux*) +- os=-hiuxwe2 +- ;; +- -sco4) +- os=-sco3.2v4 +- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` +- ;; +- -sco3.2.[4-9]*) +- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` +- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` +- ;; +- -sco3.2v[4-9]*) +- # Don't forget version if it is 3.2v4 or newer. +- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` +- ;; +- -sco*) +- os=-sco3.2v2 +- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` +- ;; +- -isc) +- os=-isc2.2 +- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` +- ;; +- -clix*) +- basic_machine=clipper-intergraph ++# Split fields of configuration type ++# shellcheck disable=SC2162 ++IFS="-" read field1 field2 field3 field4 <<EOF ++$1 ++EOF ++ ++# Separate into logical components for further validation ++case $1 in ++ *-*-*-*-*) ++ echo Invalid configuration \`"$1"\': more than four components >&2 ++ exit 1 + ;; +- -isc*) +- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` ++ *-*-*-*) ++ basic_machine=$field1-$field2 ++ os=$field3-$field4 + ;; +- -lynx*) +- os=-lynxos ++ *-*-*) ++ # Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two ++ # parts ++ maybe_os=$field2-$field3 ++ case $maybe_os in ++ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc \ ++ | linux-newlib* | linux-musl* | linux-uclibc* | uclinux-uclibc* \ ++ | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \ ++ | netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \ ++ | storm-chaos* | os2-emx* | rtmk-nova*) ++ basic_machine=$field1 ++ os=$maybe_os ++ ;; ++ android-linux) ++ basic_machine=$field1-unknown ++ os=linux-android ++ ;; ++ *) ++ basic_machine=$field1-$field2 ++ os=$field3 ++ ;; ++ esac + ;; +- -ptx*) +- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ++ *-*) ++ # A lone config we happen to match not fitting any pattern ++ case $field1-$field2 in ++ decstation-3100) ++ basic_machine=mips-dec ++ os= ++ ;; ++ *-*) ++ # Second component is usually, but not always the OS ++ case $field2 in ++ # Prevent following clause from handling this valid os ++ sun*os*) ++ basic_machine=$field1 ++ os=$field2 ++ ;; ++ # Manufacturers ++ dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \ ++ | att* | 7300* | 3300* | delta* | motorola* | sun[234]* \ ++ | unicom* | ibm* | next | hp | isi* | apollo | altos* \ ++ | convergent* | ncr* | news | 32* | 3600* | 3100* \ ++ | hitachi* | c[123]* | convex* | sun | crds | omron* | dg \ ++ | ultra | tti* | harris | dolphin | highlevel | gould \ ++ | cbm | ns | masscomp | apple | axis | knuth | cray \ ++ | microblaze* | sim | cisco \ ++ | oki | wec | wrs | winbond) ++ basic_machine=$field1-$field2 ++ os= ++ ;; ++ *) ++ basic_machine=$field1 ++ os=$field2 ++ ;; ++ esac ++ ;; ++ esac + ;; +- -windowsnt*) +- os=`echo $os | sed -e 's/windowsnt/winnt/'` ++ *) ++ # Convert single-component short-hands not valid as part of ++ # multi-component configurations. ++ case $field1 in ++ 386bsd) ++ basic_machine=i386-pc ++ os=bsd ++ ;; ++ a29khif) ++ basic_machine=a29k-amd ++ os=udi ++ ;; ++ adobe68k) ++ basic_machine=m68010-adobe ++ os=scout ++ ;; ++ alliant) ++ basic_machine=fx80-alliant ++ os= ++ ;; ++ altos | altos3068) ++ basic_machine=m68k-altos ++ os= ++ ;; ++ am29k) ++ basic_machine=a29k-none ++ os=bsd ++ ;; ++ amdahl) ++ basic_machine=580-amdahl ++ os=sysv ++ ;; ++ amiga) ++ basic_machine=m68k-unknown ++ os= ++ ;; ++ amigaos | amigados) ++ basic_machine=m68k-unknown ++ os=amigaos ++ ;; ++ amigaunix | amix) ++ basic_machine=m68k-unknown ++ os=sysv4 ++ ;; ++ apollo68) ++ basic_machine=m68k-apollo ++ os=sysv ++ ;; ++ apollo68bsd) ++ basic_machine=m68k-apollo ++ os=bsd ++ ;; ++ aros) ++ basic_machine=i386-pc ++ os=aros ++ ;; ++ aux) ++ basic_machine=m68k-apple ++ os=aux ++ ;; ++ balance) ++ basic_machine=ns32k-sequent ++ os=dynix ++ ;; ++ blackfin) ++ basic_machine=bfin-unknown ++ os=linux ++ ;; ++ cegcc) ++ basic_machine=arm-unknown ++ os=cegcc ++ ;; ++ convex-c1) ++ basic_machine=c1-convex ++ os=bsd ++ ;; ++ convex-c2) ++ basic_machine=c2-convex ++ os=bsd ++ ;; ++ convex-c32) ++ basic_machine=c32-convex ++ os=bsd ++ ;; ++ convex-c34) ++ basic_machine=c34-convex ++ os=bsd ++ ;; ++ convex-c38) ++ basic_machine=c38-convex ++ os=bsd ++ ;; ++ cray) ++ basic_machine=j90-cray ++ os=unicos ++ ;; ++ crds | unos) ++ basic_machine=m68k-crds ++ os= ++ ;; ++ da30) ++ basic_machine=m68k-da30 ++ os= ++ ;; ++ decstation | pmax | pmin | dec3100 | decstatn) ++ basic_machine=mips-dec ++ os= ++ ;; ++ delta88) ++ basic_machine=m88k-motorola ++ os=sysv3 ++ ;; ++ dicos) ++ basic_machine=i686-pc ++ os=dicos ++ ;; ++ djgpp) ++ basic_machine=i586-pc ++ os=msdosdjgpp ++ ;; ++ ebmon29k) ++ basic_machine=a29k-amd ++ os=ebmon ++ ;; ++ es1800 | OSE68k | ose68k | ose | OSE) ++ basic_machine=m68k-ericsson ++ os=ose ++ ;; ++ gmicro) ++ basic_machine=tron-gmicro ++ os=sysv ++ ;; ++ go32) ++ basic_machine=i386-pc ++ os=go32 ++ ;; ++ h8300hms) ++ basic_machine=h8300-hitachi ++ os=hms ++ ;; ++ h8300xray) ++ basic_machine=h8300-hitachi ++ os=xray ++ ;; ++ h8500hms) ++ basic_machine=h8500-hitachi ++ os=hms ++ ;; ++ harris) ++ basic_machine=m88k-harris ++ os=sysv3 ++ ;; ++ hp300) ++ basic_machine=m68k-hp ++ ;; ++ hp300bsd) ++ basic_machine=m68k-hp ++ os=bsd ++ ;; ++ hp300hpux) ++ basic_machine=m68k-hp ++ os=hpux ++ ;; ++ hppaosf) ++ basic_machine=hppa1.1-hp ++ os=osf ++ ;; ++ hppro) ++ basic_machine=hppa1.1-hp ++ os=proelf ++ ;; ++ i386mach) ++ basic_machine=i386-mach ++ os=mach ++ ;; ++ vsta) ++ basic_machine=i386-pc ++ os=vsta ++ ;; ++ isi68 | isi) ++ basic_machine=m68k-isi ++ os=sysv ++ ;; ++ m68knommu) ++ basic_machine=m68k-unknown ++ os=linux ++ ;; ++ magnum | m3230) ++ basic_machine=mips-mips ++ os=sysv ++ ;; ++ merlin) ++ basic_machine=ns32k-utek ++ os=sysv ++ ;; ++ mingw64) ++ basic_machine=x86_64-pc ++ os=mingw64 ++ ;; ++ mingw32) ++ basic_machine=i686-pc ++ os=mingw32 ++ ;; ++ mingw32ce) ++ basic_machine=arm-unknown ++ os=mingw32ce ++ ;; ++ monitor) ++ basic_machine=m68k-rom68k ++ os=coff ++ ;; ++ morphos) ++ basic_machine=powerpc-unknown ++ os=morphos ++ ;; ++ moxiebox) ++ basic_machine=moxie-unknown ++ os=moxiebox ++ ;; ++ msdos) ++ basic_machine=i386-pc ++ os=msdos ++ ;; ++ msys) ++ basic_machine=i686-pc ++ os=msys ++ ;; ++ mvs) ++ basic_machine=i370-ibm ++ os=mvs ++ ;; ++ nacl) ++ basic_machine=le32-unknown ++ os=nacl ++ ;; ++ ncr3000) ++ basic_machine=i486-ncr ++ os=sysv4 ++ ;; ++ netbsd386) ++ basic_machine=i386-pc ++ os=netbsd ++ ;; ++ netwinder) ++ basic_machine=armv4l-rebel ++ os=linux ++ ;; ++ news | news700 | news800 | news900) ++ basic_machine=m68k-sony ++ os=newsos ++ ;; ++ news1000) ++ basic_machine=m68030-sony ++ os=newsos ++ ;; ++ necv70) ++ basic_machine=v70-nec ++ os=sysv ++ ;; ++ nh3000) ++ basic_machine=m68k-harris ++ os=cxux ++ ;; ++ nh[45]000) ++ basic_machine=m88k-harris ++ os=cxux ++ ;; ++ nindy960) ++ basic_machine=i960-intel ++ os=nindy ++ ;; ++ mon960) ++ basic_machine=i960-intel ++ os=mon960 ++ ;; ++ nonstopux) ++ basic_machine=mips-compaq ++ os=nonstopux ++ ;; ++ os400) ++ basic_machine=powerpc-ibm ++ os=os400 ++ ;; ++ OSE68000 | ose68000) ++ basic_machine=m68000-ericsson ++ os=ose ++ ;; ++ os68k) ++ basic_machine=m68k-none ++ os=os68k ++ ;; ++ paragon) ++ basic_machine=i860-intel ++ os=osf ++ ;; ++ parisc) ++ basic_machine=hppa-unknown ++ os=linux ++ ;; ++ pw32) ++ basic_machine=i586-unknown ++ os=pw32 ++ ;; ++ rdos | rdos64) ++ basic_machine=x86_64-pc ++ os=rdos ++ ;; ++ rdos32) ++ basic_machine=i386-pc ++ os=rdos ++ ;; ++ rom68k) ++ basic_machine=m68k-rom68k ++ os=coff ++ ;; ++ sa29200) ++ basic_machine=a29k-amd ++ os=udi ++ ;; ++ sei) ++ basic_machine=mips-sei ++ os=seiux ++ ;; ++ sequent) ++ basic_machine=i386-sequent ++ os= ++ ;; ++ sps7) ++ basic_machine=m68k-bull ++ os=sysv2 ++ ;; ++ st2000) ++ basic_machine=m68k-tandem ++ os= ++ ;; ++ stratus) ++ basic_machine=i860-stratus ++ os=sysv4 ++ ;; ++ sun2) ++ basic_machine=m68000-sun ++ os= ++ ;; ++ sun2os3) ++ basic_machine=m68000-sun ++ os=sunos3 ++ ;; ++ sun2os4) ++ basic_machine=m68000-sun ++ os=sunos4 ++ ;; ++ sun3) ++ basic_machine=m68k-sun ++ os= ++ ;; ++ sun3os3) ++ basic_machine=m68k-sun ++ os=sunos3 ++ ;; ++ sun3os4) ++ basic_machine=m68k-sun ++ os=sunos4 ++ ;; ++ sun4) ++ basic_machine=sparc-sun ++ os= ++ ;; ++ sun4os3) ++ basic_machine=sparc-sun ++ os=sunos3 ++ ;; ++ sun4os4) ++ basic_machine=sparc-sun ++ os=sunos4 ++ ;; ++ sun4sol2) ++ basic_machine=sparc-sun ++ os=solaris2 ++ ;; ++ sun386 | sun386i | roadrunner) ++ basic_machine=i386-sun ++ os= ++ ;; ++ sv1) ++ basic_machine=sv1-cray ++ os=unicos ++ ;; ++ symmetry) ++ basic_machine=i386-sequent ++ os=dynix ++ ;; ++ t3e) ++ basic_machine=alphaev5-cray ++ os=unicos ++ ;; ++ t90) ++ basic_machine=t90-cray ++ os=unicos ++ ;; ++ toad1) ++ basic_machine=pdp10-xkl ++ os=tops20 ++ ;; ++ tpf) ++ basic_machine=s390x-ibm ++ os=tpf ++ ;; ++ udi29k) ++ basic_machine=a29k-amd ++ os=udi ++ ;; ++ ultra3) ++ basic_machine=a29k-nyu ++ os=sym1 ++ ;; ++ v810 | necv810) ++ basic_machine=v810-nec ++ os=none ++ ;; ++ vaxv) ++ basic_machine=vax-dec ++ os=sysv ++ ;; ++ vms) ++ basic_machine=vax-dec ++ os=vms ++ ;; ++ vxworks960) ++ basic_machine=i960-wrs ++ os=vxworks ++ ;; ++ vxworks68) ++ basic_machine=m68k-wrs ++ os=vxworks ++ ;; ++ vxworks29k) ++ basic_machine=a29k-wrs ++ os=vxworks ++ ;; ++ xbox) ++ basic_machine=i686-pc ++ os=mingw32 ++ ;; ++ ymp) ++ basic_machine=ymp-cray ++ os=unicos ++ ;; ++ *) ++ basic_machine=$1 ++ os= ++ ;; ++ esac + ;; + esac + +-# Decode aliases for certain CPU-COMPANY combinations. ++# Decode 1-component or ad-hoc basic machines + case $basic_machine in +- # Recognize the basic CPU types without company name. +- # Some are omitted here because they have special meanings below. +- tahoe | i[345]86 | i860 | m68k | m68000 | m88k | ns32k | arm \ +- | arme[lb] | pyramid \ +- | tron | a29k | 580 | i960 | h8300 | hppa1.0 | hppa1.1 \ +- | alpha | we32k | ns16k | clipper | sparclite | i370 | sh \ +- | powerpc | powerpcle | sparc64 | 1750a | dsp16xx | mips64 | mipsel \ +- | pdp11 | mips64el | mips64orion | mips64orionel \ +- | sparc) +- basic_machine=$basic_machine-unknown ++ # Here we handle the default manufacturer of certain CPU types. It is in ++ # some cases the only manufacturer, in others, it is the most popular. ++ w89k) ++ cpu=hppa1.1 ++ vendor=winbond ++ ;; ++ op50n) ++ cpu=hppa1.1 ++ vendor=oki ++ ;; ++ op60c) ++ cpu=hppa1.1 ++ vendor=oki ++ ;; ++ ibm*) ++ cpu=i370 ++ vendor=ibm + ;; +- # Object if more than one company name word. +- *-*-*) +- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 +- exit 1 ++ orion105) ++ cpu=clipper ++ vendor=highlevel + ;; +- # Recognize the basic CPU types with company name. +- vax-* | tahoe-* | i[345]86-* | i860-* | m68k-* | m68000-* | m88k-* \ +- | sparc-* | ns32k-* | fx80-* | arm-* | c[123]* \ +- | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* | power-* \ +- | none-* | 580-* | cray2-* | h8300-* | i960-* | xmp-* | ymp-* \ +- | hppa1.0-* | hppa1.1-* | alpha-* | we32k-* | cydra-* | ns16k-* \ +- | pn-* | np1-* | xps100-* | clipper-* | orion-* | sparclite-* \ +- | pdp11-* | sh-* | powerpc-* | powerpcle-* | sparc64-* | mips64-* | mipsel-* \ +- | mips64el-* | mips64orion-* | mips64orionel-*) ++ mac | mpw | mac-mpw) ++ cpu=m68k ++ vendor=apple ++ ;; ++ pmac | pmac-mpw) ++ cpu=powerpc ++ vendor=apple + ;; ++ + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) +- basic_machine=m68000-att ++ cpu=m68000 ++ vendor=att + ;; + 3b*) +- basic_machine=we32k-att +- ;; +- alliant | fx80) +- basic_machine=fx80-alliant +- ;; +- altos | altos3068) +- basic_machine=m68k-altos +- ;; +- am29k) +- basic_machine=a29k-none +- os=-bsd +- ;; +- amdahl) +- basic_machine=580-amdahl +- os=-sysv +- ;; +- amiga | amiga-*) +- basic_machine=m68k-cbm +- ;; +- amigados) +- basic_machine=m68k-cbm +- os=-amigados +- ;; +- amigaunix | amix) +- basic_machine=m68k-cbm +- os=-sysv4 +- ;; +- apollo68) +- basic_machine=m68k-apollo +- os=-sysv +- ;; +- balance) +- basic_machine=ns32k-sequent +- os=-dynix ++ cpu=we32k ++ vendor=att + ;; +- convex-c1) +- basic_machine=c1-convex +- os=-bsd +- ;; +- convex-c2) +- basic_machine=c2-convex +- os=-bsd +- ;; +- convex-c32) +- basic_machine=c32-convex +- os=-bsd +- ;; +- convex-c34) +- basic_machine=c34-convex +- os=-bsd +- ;; +- convex-c38) +- basic_machine=c38-convex +- os=-bsd +- ;; +- cray | ymp) +- basic_machine=ymp-cray +- os=-unicos +- ;; +- cray2) +- basic_machine=cray2-cray +- os=-unicos +- ;; +- crds | unos) +- basic_machine=m68k-crds +- ;; +- da30 | da30-*) +- basic_machine=m68k-da30 +- ;; +- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) +- basic_machine=mips-dec ++ bluegene*) ++ cpu=powerpc ++ vendor=ibm ++ os=cnk ++ ;; ++ decsystem10* | dec10*) ++ cpu=pdp10 ++ vendor=dec ++ os=tops10 ++ ;; ++ decsystem20* | dec20*) ++ cpu=pdp10 ++ vendor=dec ++ os=tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) +- basic_machine=m68k-motorola ++ cpu=m68k ++ vendor=motorola + ;; +- delta88) +- basic_machine=m88k-motorola +- os=-sysv3 +- ;; +- dpx20 | dpx20-*) +- basic_machine=rs6000-bull +- os=-bosx +- ;; +- dpx2* | dpx2*-bull) +- basic_machine=m68k-bull +- os=-sysv3 +- ;; +- ebmon29k) +- basic_machine=a29k-amd +- os=-ebmon +- ;; +- elxsi) +- basic_machine=elxsi-elxsi +- os=-bsd ++ dpx2*) ++ cpu=m68k ++ vendor=bull ++ os=sysv3 + ;; + encore | umax | mmax) +- basic_machine=ns32k-encore ++ cpu=ns32k ++ vendor=encore ++ ;; ++ elxsi) ++ cpu=elxsi ++ vendor=elxsi ++ os=${os:-bsd} + ;; + fx2800) +- basic_machine=i860-alliant ++ cpu=i860 ++ vendor=alliant + ;; + genix) +- basic_machine=ns32k-ns +- ;; +- gmicro) +- basic_machine=tron-gmicro +- os=-sysv ++ cpu=ns32k ++ vendor=ns + ;; + h3050r* | hiux*) +- basic_machine=hppa1.1-hitachi +- os=-hiuxwe2 +- ;; +- h8300hms) +- basic_machine=h8300-hitachi +- os=-hms +- ;; +- harris) +- basic_machine=m88k-harris +- os=-sysv3 +- ;; +- hp300-*) +- basic_machine=m68k-hp +- ;; +- hp300bsd) +- basic_machine=m68k-hp +- os=-bsd +- ;; +- hp300hpux) +- basic_machine=m68k-hp +- os=-hpux ++ cpu=hppa1.1 ++ vendor=hitachi ++ os=hiuxwe2 ++ ;; ++ hp3k9[0-9][0-9] | hp9[0-9][0-9]) ++ cpu=hppa1.0 ++ vendor=hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) +- basic_machine=m68000-hp ++ cpu=m68000 ++ vendor=hp + ;; + hp9k3[2-9][0-9]) +- basic_machine=m68k-hp ++ cpu=m68k ++ vendor=hp + ;; +- hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7) +- basic_machine=hppa1.1-hp ++ hp9k6[0-9][0-9] | hp6[0-9][0-9]) ++ cpu=hppa1.0 ++ vendor=hp ++ ;; ++ hp9k7[0-79][0-9] | hp7[0-79][0-9]) ++ cpu=hppa1.1 ++ vendor=hp ++ ;; ++ hp9k78[0-9] | hp78[0-9]) ++ # FIXME: really hppa2.0-hp ++ cpu=hppa1.1 ++ vendor=hp ++ ;; ++ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) ++ # FIXME: really hppa2.0-hp ++ cpu=hppa1.1 ++ vendor=hp ++ ;; ++ hp9k8[0-9][13679] | hp8[0-9][13679]) ++ cpu=hppa1.1 ++ vendor=hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) +- basic_machine=hppa1.0-hp ++ cpu=hppa1.0 ++ vendor=hp + ;; +- i370-ibm* | ibm*) +- basic_machine=i370-ibm +- os=-mvs +- ;; +-# I'm not sure what "Sysv32" means. Should this be sysv3.2? +- i[345]86v32) +- basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'` +- os=-sysv32 +- ;; +- i[345]86v4*) +- basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'` +- os=-sysv4 +- ;; +- i[345]86v) +- basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'` +- os=-sysv +- ;; +- i[345]86sol2) +- basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'` +- os=-solaris2 ++ i*86v32) ++ cpu=`echo "$1" | sed -e 's/86.*/86/'` ++ vendor=pc ++ os=sysv32 ++ ;; ++ i*86v4*) ++ cpu=`echo "$1" | sed -e 's/86.*/86/'` ++ vendor=pc ++ os=sysv4 ++ ;; ++ i*86v) ++ cpu=`echo "$1" | sed -e 's/86.*/86/'` ++ vendor=pc ++ os=sysv ++ ;; ++ i*86sol2) ++ cpu=`echo "$1" | sed -e 's/86.*/86/'` ++ vendor=pc ++ os=solaris2 ++ ;; ++ j90 | j90-cray) ++ cpu=j90 ++ vendor=cray ++ os=${os:-unicos} + ;; + iris | iris4d) +- basic_machine=mips-sgi ++ cpu=mips ++ vendor=sgi + case $os in +- -irix*) ++ irix*) + ;; + *) +- os=-irix4 ++ os=irix4 + ;; + esac + ;; +- isi68 | isi) +- basic_machine=m68k-isi +- os=-sysv +- ;; +- m88k-omron*) +- basic_machine=m88k-omron +- ;; +- magnum | m3230) +- basic_machine=mips-mips +- os=-sysv +- ;; +- merlin) +- basic_machine=ns32k-utek +- os=-sysv +- ;; + miniframe) +- basic_machine=m68000-convergent +- ;; +- mips3*-*) +- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` +- ;; +- mips3*) +- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ++ cpu=m68000 ++ vendor=convergent + ;; +- ncr3000) +- basic_machine=i486-ncr +- os=-sysv4 +- ;; +- news | news700 | news800 | news900) +- basic_machine=m68k-sony +- os=-newsos +- ;; +- news1000) +- basic_machine=m68030-sony +- os=-newsos ++ *mint | mint[0-9]* | *MiNT | *MiNT[0-9]*) ++ cpu=m68k ++ vendor=atari ++ os=mint + ;; + news-3600 | risc-news) +- basic_machine=mips-sony +- os=-newsos +- ;; +- next | m*-next ) +- basic_machine=m68k-next ++ cpu=mips ++ vendor=sony ++ os=newsos ++ ;; ++ next | m*-next) ++ cpu=m68k ++ vendor=next + case $os in +- -nextstep* ) ++ openstep*) ++ ;; ++ nextstep*) + ;; +- -ns2*) +- os=-nextstep2 ++ ns2*) ++ os=nextstep2 + ;; + *) +- os=-nextstep3 ++ os=nextstep3 + ;; + esac + ;; +- nh3000) +- basic_machine=m68k-harris +- os=-cxux +- ;; +- nh[45]000) +- basic_machine=m88k-harris +- os=-cxux +- ;; +- nindy960) +- basic_machine=i960-intel +- os=-nindy +- ;; + np1) +- basic_machine=np1-gould ++ cpu=np1 ++ vendor=gould + ;; +- pa-hitachi) +- basic_machine=hppa1.1-hitachi +- os=-hiuxwe2 ++ op50n-* | op60c-*) ++ cpu=hppa1.1 ++ vendor=oki ++ os=proelf + ;; +- paragon) +- basic_machine=i860-intel +- os=-osf ++ pa-hitachi) ++ cpu=hppa1.1 ++ vendor=hitachi ++ os=hiuxwe2 + ;; + pbd) +- basic_machine=sparc-tti ++ cpu=sparc ++ vendor=tti + ;; + pbb) +- basic_machine=m68k-tti +- ;; +- pc532 | pc532-*) +- basic_machine=ns32k-pc532 ++ cpu=m68k ++ vendor=tti + ;; +- pentium | p5 | p6) +- # We don't have specific support for the Intel Pentium (p6) followon yet, so just call it a Pentium +- basic_machine=i586-intel +- ;; +- pentium-* | p5-* | p6-*) +- # We don't have specific support for the Intel Pentium (p6) followon yet, so just call it a Pentium +- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` +- ;; +- k5) +- # We don't have specific support for AMD's K5 yet, so just call it a Pentium +- basic_machine=i586-amd +- ;; +- nexen) +- # We don't have specific support for Nexgen yet, so just call it a Pentium +- basic_machine=i586-nexgen ++ pc532) ++ cpu=ns32k ++ vendor=pc532 + ;; + pn) +- basic_machine=pn-gould +- ;; +- power) basic_machine=rs6000-ibm ++ cpu=pn ++ vendor=gould + ;; +- ppc) basic_machine=powerpc-unknown +- ;; +- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` +- ;; +- ppcle | powerpclittle | ppc-le | powerpc-little) +- basic_machine=powerpcle-unknown +- ;; +- ppcle-* | powerpclittle-*) +- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ++ power) ++ cpu=power ++ vendor=ibm + ;; + ps2) +- basic_machine=i386-ibm ++ cpu=i386 ++ vendor=ibm + ;; + rm[46]00) +- basic_machine=mips-siemens ++ cpu=mips ++ vendor=siemens + ;; + rtpc | rtpc-*) +- basic_machine=romp-ibm ++ cpu=romp ++ vendor=ibm + ;; +- sequent) +- basic_machine=i386-sequent ++ sde) ++ cpu=mipsisa32 ++ vendor=sde ++ os=${os:-elf} ++ ;; ++ simso-wrs) ++ cpu=sparclite ++ vendor=wrs ++ os=vxworks + ;; +- sh) +- basic_machine=sh-hitachi +- os=-hms ++ tower | tower-32) ++ cpu=m68k ++ vendor=ncr + ;; +- sps7) +- basic_machine=m68k-bull +- os=-sysv2 ++ vpp*|vx|vx-*) ++ cpu=f301 ++ vendor=fujitsu ++ ;; ++ w65) ++ cpu=w65 ++ vendor=wdc ++ ;; ++ w89k-*) ++ cpu=hppa1.1 ++ vendor=winbond ++ os=proelf + ;; +- spur) +- basic_machine=spur-unknown ++ none) ++ cpu=none ++ vendor=none + ;; +- sun2) +- basic_machine=m68000-sun ++ leon|leon[3-9]) ++ cpu=sparc ++ vendor=$basic_machine ++ ;; ++ leon-*|leon[3-9]-*) ++ cpu=sparc ++ vendor=`echo "$basic_machine" | sed 's/-.*//'` + ;; +- sun2os3) +- basic_machine=m68000-sun +- os=-sunos3 ++ ++ *-*) ++ # shellcheck disable=SC2162 ++ IFS="-" read cpu vendor <<EOF ++$basic_machine ++EOF ++ ;; ++ # We use `pc' rather than `unknown' ++ # because (1) that's what they normally are, and ++ # (2) the word "unknown" tends to confuse beginning users. ++ i*86 | x86_64) ++ cpu=$basic_machine ++ vendor=pc ++ ;; ++ # These rules are duplicated from below for sake of the special case above; ++ # i.e. things that normalized to x86 arches should also default to "pc" ++ pc98) ++ cpu=i386 ++ vendor=pc ++ ;; ++ x64 | amd64) ++ cpu=x86_64 ++ vendor=pc + ;; +- sun2os4) +- basic_machine=m68000-sun +- os=-sunos4 ++ # Recognize the basic CPU types without company name. ++ *) ++ cpu=$basic_machine ++ vendor=unknown ++ ;; ++esac ++ ++unset -v basic_machine ++ ++# Decode basic machines in the full and proper CPU-Company form. ++case $cpu-$vendor in ++ # Here we handle the default manufacturer of certain CPU types in canonical form. It is in ++ # some cases the only manufacturer, in others, it is the most popular. ++ craynv-unknown) ++ vendor=cray ++ os=${os:-unicosmp} + ;; +- sun3os3) +- basic_machine=m68k-sun +- os=-sunos3 ++ c90-unknown | c90-cray) ++ vendor=cray ++ os=${os:-unicos} + ;; +- sun3os4) +- basic_machine=m68k-sun +- os=-sunos4 ++ fx80-unknown) ++ vendor=alliant + ;; +- sun4os3) +- basic_machine=sparc-sun +- os=-sunos3 ++ romp-unknown) ++ vendor=ibm + ;; +- sun4os4) +- basic_machine=sparc-sun +- os=-sunos4 ++ mmix-unknown) ++ vendor=knuth + ;; +- sun4sol2) +- basic_machine=sparc-sun +- os=-solaris2 ++ microblaze-unknown | microblazeel-unknown) ++ vendor=xilinx + ;; +- sun3 | sun3-*) +- basic_machine=m68k-sun ++ rs6000-unknown) ++ vendor=ibm + ;; +- sun4) +- basic_machine=sparc-sun ++ vax-unknown) ++ vendor=dec + ;; +- sun386 | sun386i | roadrunner) +- basic_machine=i386-sun ++ pdp11-unknown) ++ vendor=dec + ;; +- symmetry) +- basic_machine=i386-sequent +- os=-dynix ++ we32k-unknown) ++ vendor=att + ;; +- tower | tower-32) +- basic_machine=m68k-ncr ++ cydra-unknown) ++ vendor=cydrome + ;; +- udi29k) +- basic_machine=a29k-amd +- os=-udi +- ;; +- ultra3) +- basic_machine=a29k-nyu +- os=-sym1 +- ;; +- vaxv) +- basic_machine=vax-dec +- os=-sysv +- ;; +- vms) +- basic_machine=vax-dec +- os=-vms +- ;; +- vxworks960) +- basic_machine=i960-wrs +- os=-vxworks +- ;; +- vxworks68) +- basic_machine=m68k-wrs +- os=-vxworks +- ;; +- vxworks29k) +- basic_machine=a29k-wrs +- os=-vxworks +- ;; +- xmp) +- basic_machine=xmp-cray +- os=-unicos ++ i370-ibm*) ++ vendor=ibm + ;; +- xps | xps100) +- basic_machine=xps100-honeywell ++ orion-unknown) ++ vendor=highlevel + ;; +- none) +- basic_machine=none-none +- os=-none ++ xps-unknown | xps100-unknown) ++ cpu=xps100 ++ vendor=honeywell ++ ;; ++ ++ # Here we normalize CPU types with a missing or matching vendor ++ dpx20-unknown | dpx20-bull) ++ cpu=rs6000 ++ vendor=bull ++ os=${os:-bosx} + ;; + +-# Here we handle the default manufacturer of certain CPU types. It is in +-# some cases the only manufacturer, in others, it is the most popular. +- mips) +- basic_machine=mips-mips ++ # Here we normalize CPU types irrespective of the vendor ++ amd64-*) ++ cpu=x86_64 ++ ;; ++ blackfin-*) ++ cpu=bfin ++ os=linux ++ ;; ++ c54x-*) ++ cpu=tic54x ++ ;; ++ c55x-*) ++ cpu=tic55x ++ ;; ++ c6x-*) ++ cpu=tic6x ++ ;; ++ e500v[12]-*) ++ cpu=powerpc ++ os=$os"spe" + ;; +- romp) +- basic_machine=romp-ibm ++ mips3*-*) ++ cpu=mips64 + ;; +- rs6000) +- basic_machine=rs6000-ibm ++ ms1-*) ++ cpu=mt + ;; +- vax) +- basic_machine=vax-dec ++ m68knommu-*) ++ cpu=m68k ++ os=linux + ;; +- pdp11) +- basic_machine=pdp11-dec ++ m9s12z-* | m68hcs12z-* | hcs12z-* | s12z-*) ++ cpu=s12z + ;; +- we32k) +- basic_machine=we32k-att ++ openrisc-*) ++ cpu=or32 + ;; +- sparc) +- basic_machine=sparc-sun ++ parisc-*) ++ cpu=hppa ++ os=linux + ;; +- cydra) +- basic_machine=cydra-cydrome ++ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) ++ cpu=i586 + ;; +- orion) +- basic_machine=orion-highlevel ++ pentiumpro-* | p6-* | 6x86-* | athlon-* | athalon_*-*) ++ cpu=i686 + ;; +- orion105) +- basic_machine=clipper-highlevel ++ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) ++ cpu=i686 ++ ;; ++ pentium4-*) ++ cpu=i786 ++ ;; ++ pc98-*) ++ cpu=i386 ++ ;; ++ ppc-* | ppcbe-*) ++ cpu=powerpc ++ ;; ++ ppcle-* | powerpclittle-*) ++ cpu=powerpcle ++ ;; ++ ppc64-*) ++ cpu=powerpc64 ++ ;; ++ ppc64le-* | powerpc64little-*) ++ cpu=powerpc64le ++ ;; ++ sb1-*) ++ cpu=mipsisa64sb1 ++ ;; ++ sb1el-*) ++ cpu=mipsisa64sb1el + ;; ++ sh5e[lb]-*) ++ cpu=`echo "$cpu" | sed 's/^\(sh.\)e\(.\)$/\1\2e/'` ++ ;; ++ spur-*) ++ cpu=spur ++ ;; ++ strongarm-* | thumb-*) ++ cpu=arm ++ ;; ++ tx39-*) ++ cpu=mipstx39 ++ ;; ++ tx39el-*) ++ cpu=mipstx39el ++ ;; ++ x64-*) ++ cpu=x86_64 ++ ;; ++ xscale-* | xscalee[bl]-*) ++ cpu=`echo "$cpu" | sed 's/^xscale/arm/'` ++ ;; ++ ++ # Recognize the canonical CPU Types that limit and/or modify the ++ # company names they are paired with. ++ cr16-*) ++ os=${os:-elf} ++ ;; ++ crisv32-* | etraxfs*-*) ++ cpu=crisv32 ++ vendor=axis ++ ;; ++ cris-* | etrax*-*) ++ cpu=cris ++ vendor=axis ++ ;; ++ crx-*) ++ os=${os:-elf} ++ ;; ++ neo-tandem) ++ cpu=neo ++ vendor=tandem ++ ;; ++ nse-tandem) ++ cpu=nse ++ vendor=tandem ++ ;; ++ nsr-tandem) ++ cpu=nsr ++ vendor=tandem ++ ;; ++ nsv-tandem) ++ cpu=nsv ++ vendor=tandem ++ ;; ++ nsx-tandem) ++ cpu=nsx ++ vendor=tandem ++ ;; ++ s390-*) ++ cpu=s390 ++ vendor=ibm ++ ;; ++ s390x-*) ++ cpu=s390x ++ vendor=ibm ++ ;; ++ tile*-*) ++ os=${os:-linux-gnu} ++ ;; ++ + *) +- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 +- exit 1 ++ # Recognize the canonical CPU types that are allowed with any ++ # company name. ++ case $cpu in ++ 1750a | 580 \ ++ | a29k \ ++ | aarch64 | aarch64_be \ ++ | abacus \ ++ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] \ ++ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] \ ++ | alphapca5[67] | alpha64pca5[67] \ ++ | am33_2.0 \ ++ | amdgcn \ ++ | arc | arceb \ ++ | arm | arm[lb]e | arme[lb] | armv* \ ++ | avr | avr32 \ ++ | asmjs \ ++ | ba \ ++ | be32 | be64 \ ++ | bfin | bs2000 \ ++ | c[123]* | c30 | [cjt]90 | c4x \ ++ | c8051 | clipper | craynv | csky | cydra \ ++ | d10v | d30v | dlx | dsp16xx \ ++ | e2k | elxsi | epiphany \ ++ | f30[01] | f700 | fido | fr30 | frv | ft32 | fx80 \ ++ | h8300 | h8500 \ ++ | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ ++ | hexagon \ ++ | i370 | i*86 | i860 | i960 | ia16 | ia64 \ ++ | ip2k | iq2000 \ ++ | k1om \ ++ | le32 | le64 \ ++ | lm32 \ ++ | m32c | m32r | m32rle \ ++ | m5200 | m68000 | m680[012346]0 | m68360 | m683?2 | m68k \ ++ | m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x \ ++ | m88110 | m88k | maxq | mb | mcore | mep | metag \ ++ | microblaze | microblazeel \ ++ | mips | mipsbe | mipseb | mipsel | mipsle \ ++ | mips16 \ ++ | mips64 | mips64eb | mips64el \ ++ | mips64octeon | mips64octeonel \ ++ | mips64orion | mips64orionel \ ++ | mips64r5900 | mips64r5900el \ ++ | mips64vr | mips64vrel \ ++ | mips64vr4100 | mips64vr4100el \ ++ | mips64vr4300 | mips64vr4300el \ ++ | mips64vr5000 | mips64vr5000el \ ++ | mips64vr5900 | mips64vr5900el \ ++ | mipsisa32 | mipsisa32el \ ++ | mipsisa32r2 | mipsisa32r2el \ ++ | mipsisa32r6 | mipsisa32r6el \ ++ | mipsisa64 | mipsisa64el \ ++ | mipsisa64r2 | mipsisa64r2el \ ++ | mipsisa64r6 | mipsisa64r6el \ ++ | mipsisa64sb1 | mipsisa64sb1el \ ++ | mipsisa64sr71k | mipsisa64sr71kel \ ++ | mipsr5900 | mipsr5900el \ ++ | mipstx39 | mipstx39el \ ++ | mmix \ ++ | mn10200 | mn10300 \ ++ | moxie \ ++ | mt \ ++ | msp430 \ ++ | nds32 | nds32le | nds32be \ ++ | nfp \ ++ | nios | nios2 | nios2eb | nios2el \ ++ | none | np1 | ns16k | ns32k | nvptx \ ++ | open8 \ ++ | or1k* \ ++ | or32 \ ++ | orion \ ++ | picochip \ ++ | pdp10 | pdp11 | pj | pjl | pn | power \ ++ | powerpc | powerpc64 | powerpc64le | powerpcle | powerpcspe \ ++ | pru \ ++ | pyramid \ ++ | riscv | riscv32 | riscv64 \ ++ | rl78 | romp | rs6000 | rx \ ++ | score \ ++ | sh | shl \ ++ | sh[1234] | sh[24]a | sh[24]ae[lb] | sh[23]e | she[lb] | sh[lb]e \ ++ | sh[1234]e[lb] | sh[12345][lb]e | sh[23]ele | sh64 | sh64le \ ++ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet \ ++ | sparclite \ ++ | sparcv8 | sparcv9 | sparcv9b | sparcv9v | sv1 | sx* \ ++ | spu \ ++ | tahoe \ ++ | tic30 | tic4x | tic54x | tic55x | tic6x | tic80 \ ++ | tron \ ++ | ubicom32 \ ++ | v70 | v850 | v850e | v850e1 | v850es | v850e2 | v850e2v3 \ ++ | vax \ ++ | visium \ ++ | w65 \ ++ | wasm32 | wasm64 \ ++ | we32k \ ++ | x86 | x86_64 | xc16x | xgate | xps100 \ ++ | xstormy16 | xtensa* \ ++ | ymp \ ++ | z8k | z80) ++ ;; ++ ++ *) ++ echo Invalid configuration \`"$1"\': machine \`"$cpu-$vendor"\' not recognized 1>&2 ++ exit 1 ++ ;; ++ esac + ;; + esac + + # Here we canonicalize certain aliases for manufacturers. +-case $basic_machine in +- *-digital*) +- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ++case $vendor in ++ digital*) ++ vendor=dec + ;; +- *-commodore*) +- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ++ commodore*) ++ vendor=cbm + ;; + *) + ;; +@@ -612,96 +1278,246 @@ esac + + # Decode manufacturer-specific aliases for certain operating systems. + +-if [ x"$os" != x"" ] ++if [ x$os != x ] + then + case $os in +- # -solaris* is a basic system type, with this one exception. +- -solaris1 | -solaris1.*) ++ # First match some system type aliases that might get confused ++ # with valid system types. ++ # solaris* is a basic system type, with this one exception. ++ auroraux) ++ os=auroraux ++ ;; ++ bluegene*) ++ os=cnk ++ ;; ++ solaris1 | solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; +- -solaris) +- os=-solaris2 ++ solaris) ++ os=solaris2 ++ ;; ++ unixware*) ++ os=sysv4.2uw ++ ;; ++ gnu/linux*) ++ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ++ ;; ++ # es1800 is here to avoid being matched by es* (a different OS) ++ es1800*) ++ os=ose ++ ;; ++ # Some version numbers need modification ++ chorusos*) ++ os=chorusos ++ ;; ++ isc) ++ os=isc2.2 ++ ;; ++ sco6) ++ os=sco5v6 ++ ;; ++ sco5) ++ os=sco3.2v5 ++ ;; ++ sco4) ++ os=sco3.2v4 ++ ;; ++ sco3.2.[4-9]*) ++ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` ++ ;; ++ sco3.2v[4-9]* | sco5v6*) ++ # Don't forget version if it is 3.2v4 or newer. ++ ;; ++ scout) ++ # Don't match below + ;; +- -unixware* | svr4*) +- os=-sysv4 ++ sco*) ++ os=sco3.2v2 + ;; +- -gnu/linux*) +- os=`echo $os | sed -e 's|gnu/linux|linux|'` ++ psos*) ++ os=psos + ;; +- # First accept the basic system types. ++ # Now accept the basic system types. + # The portable systems comes first. +- # Each alternative MUST END IN A *, to match a version number. +- # -sysv* is not here because it comes later, after sysvr4. +- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ +- | -vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[345]* \ +- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ +- | -amigados* | -msdos* | -newsos* | -unicos* | -aos* \ +- | -nindy* | -vxworks* | -ebmon* | -hms* | -mvs* | -clix* \ +- | -riscos* | -linux* | -uniplus* | -iris* | -rtu* | -xenix* \ +- | -hiux* | -386bsd* | -netbsd* | -freebsd* | -riscix* \ +- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \ +- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ +- | -udi* | -eabi* | -lites* ) ++ # Each alternative MUST end in a * to match a version number. ++ # sysv* is not here because it comes later, after sysvr4. ++ gnu* | bsd* | mach* | minix* | genix* | ultrix* | irix* \ ++ | *vms* | esix* | aix* | cnk* | sunos | sunos[34]*\ ++ | hpux* | unos* | osf* | luna* | dgux* | auroraux* | solaris* \ ++ | sym* | kopensolaris* | plan9* \ ++ | amigaos* | amigados* | msdos* | newsos* | unicos* | aof* \ ++ | aos* | aros* | cloudabi* | sortix* \ ++ | nindy* | vxsim* | vxworks* | ebmon* | hms* | mvs* \ ++ | clix* | riscos* | uniplus* | iris* | isc* | rtu* | xenix* \ ++ | knetbsd* | mirbsd* | netbsd* \ ++ | bitrig* | openbsd* | solidbsd* | libertybsd* \ ++ | ekkobsd* | kfreebsd* | freebsd* | riscix* | lynxos* \ ++ | bosx* | nextstep* | cxux* | aout* | elf* | oabi* \ ++ | ptx* | coff* | ecoff* | winnt* | domain* | vsta* \ ++ | udi* | eabi* | lites* | ieee* | go32* | aux* | hcos* \ ++ | chorusrdb* | cegcc* | glidix* \ ++ | cygwin* | msys* | pe* | moss* | proelf* | rtems* \ ++ | midipix* | mingw32* | mingw64* | linux-gnu* | linux-android* \ ++ | linux-newlib* | linux-musl* | linux-uclibc* \ ++ | uxpv* | beos* | mpeix* | udk* | moxiebox* \ ++ | interix* | uwin* | mks* | rhapsody* | darwin* \ ++ | openstep* | oskit* | conix* | pw32* | nonstopux* \ ++ | storm-chaos* | tops10* | tenex* | tops20* | its* \ ++ | os2* | vos* | palmos* | uclinux* | nucleus* \ ++ | morphos* | superux* | rtmk* | windiss* \ ++ | powermax* | dnix* | nx6 | nx7 | sei* | dragonfly* \ ++ | skyos* | haiku* | rdos* | toppers* | drops* | es* \ ++ | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \ ++ | midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; +- -sunos5*) +- os=`echo $os | sed -e 's|sunos5|solaris2|'` ++ qnx*) ++ case $cpu in ++ x86 | i*86) ++ ;; ++ *) ++ os=nto-$os ++ ;; ++ esac ++ ;; ++ hiux*) ++ os=hiuxwe2 ++ ;; ++ nto-qnx*) ++ ;; ++ nto*) ++ os=`echo $os | sed -e 's|nto|nto-qnx|'` ++ ;; ++ sim | xray | os68k* | v88r* \ ++ | windows* | osx | abug | netware* | os9* \ ++ | macos* | mpw* | magic* | mmixware* | mon960* | lnews*) ++ ;; ++ linux-dietlibc) ++ os=linux-dietlibc ++ ;; ++ linux*) ++ os=`echo $os | sed -e 's|linux|linux-gnu|'` ++ ;; ++ lynx*178) ++ os=lynxos178 ++ ;; ++ lynx*5) ++ os=lynxos5 ++ ;; ++ lynx*) ++ os=lynxos ++ ;; ++ mac*) ++ os=`echo "$os" | sed -e 's|mac|macos|'` ++ ;; ++ opened*) ++ os=openedition ++ ;; ++ os400*) ++ os=os400 ++ ;; ++ sunos5*) ++ os=`echo "$os" | sed -e 's|sunos5|solaris2|'` ++ ;; ++ sunos6*) ++ os=`echo "$os" | sed -e 's|sunos6|solaris3|'` ++ ;; ++ wince*) ++ os=wince ++ ;; ++ utek*) ++ os=bsd ++ ;; ++ dynix*) ++ os=bsd ++ ;; ++ acis*) ++ os=aos + ;; +- -sunos6*) +- os=`echo $os | sed -e 's|sunos6|solaris3|'` ++ atheos*) ++ os=atheos + ;; +- -osfrose*) +- os=-osfrose ++ syllable*) ++ os=syllable + ;; +- -osf*) +- os=-osf ++ 386bsd) ++ os=bsd + ;; +- -utek*) +- os=-bsd ++ ctix* | uts*) ++ os=sysv + ;; +- -dynix*) +- os=-bsd ++ nova*) ++ os=rtmk-nova + ;; +- -acis*) +- os=-aos ++ ns2) ++ os=nextstep2 + ;; +- -ctix* | -uts*) +- os=-sysv ++ nsk*) ++ os=nsk + ;; + # Preserve the version number of sinix5. +- -sinix5.*) ++ sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; +- -sinix*) +- os=-sysv4 ++ sinix*) ++ os=sysv4 + ;; +- -triton*) +- os=-sysv3 ++ tpf*) ++ os=tpf + ;; +- -oss*) +- os=-sysv3 ++ triton*) ++ os=sysv3 + ;; +- -svr4) +- os=-sysv4 ++ oss*) ++ os=sysv3 + ;; +- -svr3) +- os=-sysv3 ++ svr4*) ++ os=sysv4 + ;; +- -sysvr4) +- os=-sysv4 ++ svr3) ++ os=sysv3 + ;; +- # This must come after -sysvr4. +- -sysv*) ++ sysvr4) ++ os=sysv4 + ;; +- -xenix) +- os=-xenix ++ # This must come after sysvr4. ++ sysv*) + ;; +- -none) ++ ose*) ++ os=ose ++ ;; ++ *mint | mint[0-9]* | *MiNT | MiNT[0-9]*) ++ os=mint ++ ;; ++ zvmoe) ++ os=zvmoe ++ ;; ++ dicos*) ++ os=dicos ++ ;; ++ pikeos*) ++ # Until real need of OS specific support for ++ # particular features comes up, bare metal ++ # configurations are quite functional. ++ case $cpu in ++ arm*) ++ os=eabi ++ ;; ++ *) ++ os=elf ++ ;; ++ esac ++ ;; ++ nacl*) ++ ;; ++ ios) ++ ;; ++ none) ++ ;; ++ *-eabi) + ;; + *) +- # Get rid of the `-' at the beginning of $os. +- os=`echo $os | sed 's/[^-]*-//'` +- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 ++ echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2 + exit 1 + ;; + esac +@@ -717,151 +1533,266 @@ else + # will signal an error saying that MANUFACTURER isn't an operating + # system, and we'll never get to this point. + +-case $basic_machine in ++case $cpu-$vendor in ++ score-*) ++ os=elf ++ ;; ++ spu-*) ++ os=elf ++ ;; + *-acorn) +- os=-riscix1.2 ++ os=riscix1.2 ++ ;; ++ arm*-rebel) ++ os=linux + ;; + arm*-semi) +- os=-aout ++ os=aout ++ ;; ++ c4x-* | tic4x-*) ++ os=coff ++ ;; ++ c8051-*) ++ os=elf ++ ;; ++ clipper-intergraph) ++ os=clix ++ ;; ++ hexagon-*) ++ os=elf + ;; +- pdp11-*) +- os=-none ++ tic54x-*) ++ os=coff ++ ;; ++ tic55x-*) ++ os=coff ++ ;; ++ tic6x-*) ++ os=coff ++ ;; ++ # This must come before the *-dec entry. ++ pdp10-*) ++ os=tops20 ++ ;; ++ pdp11-*) ++ os=none + ;; + *-dec | vax-*) +- os=-ultrix4.2 ++ os=ultrix4.2 + ;; + m68*-apollo) +- os=-domain ++ os=domain + ;; + i386-sun) +- os=-sunos4.0.2 ++ os=sunos4.0.2 + ;; + m68000-sun) +- os=-sunos3 +- # This also exists in the configure program, but was not the +- # default. +- # os=-sunos4 ++ os=sunos3 ++ ;; ++ m68*-cisco) ++ os=aout ++ ;; ++ mep-*) ++ os=elf ++ ;; ++ mips*-cisco) ++ os=elf ++ ;; ++ mips*-*) ++ os=elf ++ ;; ++ or32-*) ++ os=coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. +- os=-sysv3 ++ os=sysv3 + ;; + sparc-* | *-sun) +- os=-sunos4.1.1 ++ os=sunos4.1.1 ++ ;; ++ pru-*) ++ os=elf ++ ;; ++ *-be) ++ os=beos + ;; + *-ibm) +- os=-aix ++ os=aix ++ ;; ++ *-knuth) ++ os=mmixware ++ ;; ++ *-wec) ++ os=proelf ++ ;; ++ *-winbond) ++ os=proelf ++ ;; ++ *-oki) ++ os=proelf + ;; + *-hp) +- os=-hpux ++ os=hpux + ;; + *-hitachi) +- os=-hiux ++ os=hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) +- os=-sysv ++ os=sysv + ;; + *-cbm) +- os=-amigados ++ os=amigaos + ;; + *-dg) +- os=-dgux ++ os=dgux + ;; + *-dolphin) +- os=-sysv3 ++ os=sysv3 + ;; + m68k-ccur) +- os=-rtu ++ os=rtu + ;; + m88k-omron*) +- os=-luna ++ os=luna ++ ;; ++ *-next) ++ os=nextstep + ;; + *-sequent) +- os=-ptx ++ os=ptx + ;; + *-crds) +- os=-unos ++ os=unos + ;; + *-ns) +- os=-genix ++ os=genix + ;; + i370-*) +- os=-mvs +- ;; +- *-next) +- os=-nextstep3 ++ os=mvs + ;; +- *-gould) +- os=-sysv ++ *-gould) ++ os=sysv + ;; +- *-highlevel) +- os=-bsd ++ *-highlevel) ++ os=bsd + ;; + *-encore) +- os=-bsd ++ os=bsd + ;; +- *-sgi) +- os=-irix ++ *-sgi) ++ os=irix + ;; +- *-siemens) +- os=-sysv4 ++ *-siemens) ++ os=sysv4 + ;; + *-masscomp) +- os=-rtu ++ os=rtu ++ ;; ++ f30[01]-fujitsu | f700-fujitsu) ++ os=uxpv ++ ;; ++ *-rom68k) ++ os=coff ++ ;; ++ *-*bug) ++ os=coff ++ ;; ++ *-apple) ++ os=macos ++ ;; ++ *-atari*) ++ os=mint ++ ;; ++ *-wrs) ++ os=vxworks + ;; + *) +- os=-none ++ os=none + ;; + esac + fi + + # Here we handle the case where we know the os, and the CPU type, but not the + # manufacturer. We pick the logical manufacturer. +-vendor=unknown +-case $basic_machine in +- *-unknown) ++case $vendor in ++ unknown) + case $os in +- -riscix*) ++ riscix*) + vendor=acorn + ;; +- -sunos*) ++ sunos*) + vendor=sun + ;; +- -lynxos*) +- vendor=lynx +- ;; +- -aix*) ++ cnk*|-aix*) + vendor=ibm + ;; +- -hpux*) ++ beos*) ++ vendor=be ++ ;; ++ hpux*) ++ vendor=hp ++ ;; ++ mpeix*) + vendor=hp + ;; +- -hiux*) ++ hiux*) + vendor=hitachi + ;; +- -unos*) ++ unos*) + vendor=crds + ;; +- -dgux*) ++ dgux*) + vendor=dg + ;; +- -luna*) ++ luna*) + vendor=omron + ;; +- -genix*) ++ genix*) + vendor=ns + ;; +- -mvs*) ++ clix*) ++ vendor=intergraph ++ ;; ++ mvs* | opened*) + vendor=ibm + ;; +- -ptx*) ++ os400*) ++ vendor=ibm ++ ;; ++ ptx*) + vendor=sequent + ;; +- -vxworks*) ++ tpf*) ++ vendor=ibm ++ ;; ++ vxsim* | vxworks* | windiss*) + vendor=wrs + ;; ++ aux*) ++ vendor=apple ++ ;; ++ hms*) ++ vendor=hitachi ++ ;; ++ mpw* | macos*) ++ vendor=apple ++ ;; ++ *mint | mint[0-9]* | *MiNT | MiNT[0-9]*) ++ vendor=atari ++ ;; ++ vos*) ++ vendor=stratus ++ ;; + esac +- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; + esac + +-echo $basic_machine$os ++echo "$cpu-$vendor-$os" ++exit ++ ++# Local variables: ++# eval: (add-hook 'before-save-hook 'time-stamp) ++# time-stamp-start: "timestamp='" ++# time-stamp-format: "%:y-%02m-%02d" ++# time-stamp-end: "'" ++# End: +diff -uprN clean/lrzsz-0.12.20/configure lrzsz-0.12.20/configure +--- clean/lrzsz-0.12.20/configure 1998-12-30 07:50:18.000000000 +0000 ++++ lrzsz-0.12.20/configure 2019-11-26 11:37:45.000000000 +0000 +@@ -1,40 +1,749 @@ + #! /bin/sh +- + # Guess values for system-dependent variables and create Makefiles. +-# Generated automatically using autoconf version 2.12 +-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. ++# Generated by GNU Autoconf 2.69. ++# ++# ++# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. ++# + # + # This configure script is free software; the Free Software Foundation + # gives unlimited permission to copy, distribute and modify it. ++## -------------------- ## ++## M4sh Initialization. ## ++## -------------------- ## ++ ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : ++ emulate sh ++ NULLCMD=: ++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in #( ++ *posix*) : ++ set -o posix ;; #( ++ *) : ++ ;; ++esac ++fi ++ ++ ++as_nl=' ++' ++export as_nl ++as_echo='printf %s\n' ++as_echo_n='printf %s' ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { ++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || ++ PATH_SEPARATOR=';' ++ } ++fi ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++as_myself= ++case $0 in #(( ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++ done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ exit 1 ++fi ++ ++# Unset variables that we do not need and which cause bugs (e.g. in ++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" ++# suppresses any "Segmentation fault" message there. '((' could ++# trigger a bug in pdksh 5.2.14. ++for as_var in BASH_ENV ENV MAIL MAILPATH ++do eval test x\${$as_var+set} = xset \ ++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++LC_ALL=C ++export LC_ALL ++LANGUAGE=C ++export LANGUAGE ++ ++# CDPATH. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++# Use a proper internal environment variable to ensure we don't fall ++ # into an infinite loop, continuously re-executing ourselves. ++ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then ++ _as_can_reexec=no; export _as_can_reexec; ++ # We cannot yet assume a decent shell, so we have to provide a ++# neutralization value for shells without unset; and this also ++# works around shells that cannot unset nonexistent variables. ++# Preserve -v and -x to the replacement shell. ++BASH_ENV=/dev/null ++ENV=/dev/null ++(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV ++case $- in # (((( ++ *v*x* | *x*v* ) as_opts=-vx ;; ++ *v* ) as_opts=-v ;; ++ *x* ) as_opts=-x ;; ++ * ) as_opts= ;; ++esac ++exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} ++# Admittedly, this is quite paranoid, since all the known shells bail ++# out after a failed `exec'. ++$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 ++as_fn_exit 255 ++ fi ++ # We don't want this to propagate to other subprocesses. ++ { _as_can_reexec=; unset _as_can_reexec;} ++if test "x$CONFIG_SHELL" = x; then ++ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : ++ emulate sh ++ NULLCMD=: ++ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '\${1+\"\$@\"}'='\"\$@\"' ++ setopt NO_GLOB_SUBST ++else ++ case \`(set -o) 2>/dev/null\` in #( ++ *posix*) : ++ set -o posix ;; #( ++ *) : ++ ;; ++esac ++fi ++" ++ as_required="as_fn_return () { (exit \$1); } ++as_fn_success () { as_fn_return 0; } ++as_fn_failure () { as_fn_return 1; } ++as_fn_ret_success () { return 0; } ++as_fn_ret_failure () { return 1; } ++ ++exitcode=0 ++as_fn_success || { exitcode=1; echo as_fn_success failed.; } ++as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } ++as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } ++as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } ++if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : ++ ++else ++ exitcode=1; echo positional parameters were not saved. ++fi ++test x\$exitcode = x0 || exit 1 ++test -x / || exit 1" ++ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO ++ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO ++ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && ++ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 ++test \$(( 1 + 1 )) = 2 || exit 1" ++ if (eval "$as_required") 2>/dev/null; then : ++ as_have_required=yes ++else ++ as_have_required=no ++fi ++ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : ++ ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++as_found=false ++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ as_found=: ++ case $as_dir in #( ++ /*) ++ for as_base in bash sh ksh sh5; do ++ # Try only shells that exist, to save several forks. ++ as_shell=$as_dir/$as_base ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : ++ CONFIG_SHELL=$as_shell as_have_required=yes ++ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : ++ break 2 ++fi ++fi ++ done;; ++ esac ++ as_found=false ++done ++$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && ++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : ++ CONFIG_SHELL=$SHELL as_have_required=yes ++fi; } ++IFS=$as_save_IFS ++ ++ ++ if test "x$CONFIG_SHELL" != x; then : ++ export CONFIG_SHELL ++ # We cannot yet assume a decent shell, so we have to provide a ++# neutralization value for shells without unset; and this also ++# works around shells that cannot unset nonexistent variables. ++# Preserve -v and -x to the replacement shell. ++BASH_ENV=/dev/null ++ENV=/dev/null ++(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV ++case $- in # (((( ++ *v*x* | *x*v* ) as_opts=-vx ;; ++ *v* ) as_opts=-v ;; ++ *x* ) as_opts=-x ;; ++ * ) as_opts= ;; ++esac ++exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} ++# Admittedly, this is quite paranoid, since all the known shells bail ++# out after a failed `exec'. ++$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 ++exit 255 ++fi ++ ++ if test x$as_have_required = xno; then : ++ $as_echo "$0: This script requires a shell more modern than all" ++ $as_echo "$0: the shells that I found on your system." ++ if test x${ZSH_VERSION+set} = xset ; then ++ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" ++ $as_echo "$0: be upgraded to zsh 4.3.4 or later." ++ else ++ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, ++$0: including any error possibly output before this ++$0: message. Then install a modern shell, or manually run ++$0: the script under such a shell if you do have one." ++ fi ++ exit 1 ++fi ++fi ++fi ++SHELL=${CONFIG_SHELL-/bin/sh} ++export SHELL ++# Unset more variables known to interfere with behavior of common tools. ++CLICOLOR_FORCE= GREP_OPTIONS= ++unset CLICOLOR_FORCE GREP_OPTIONS ++ ++## --------------------- ## ++## M4sh Shell Functions. ## ++## --------------------- ## ++# as_fn_unset VAR ++# --------------- ++# Portably unset VAR. ++as_fn_unset () ++{ ++ { eval $1=; unset $1;} ++} ++as_unset=as_fn_unset + +-# Defaults: +-ac_help= ++# as_fn_set_status STATUS ++# ----------------------- ++# Set $? to STATUS, without forking. ++as_fn_set_status () ++{ ++ return $1 ++} # as_fn_set_status ++ ++# as_fn_exit STATUS ++# ----------------- ++# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. ++as_fn_exit () ++{ ++ set +e ++ as_fn_set_status $1 ++ exit $1 ++} # as_fn_exit ++ ++# as_fn_mkdir_p ++# ------------- ++# Create "$as_dir" as a directory, including parents if necessary. ++as_fn_mkdir_p () ++{ ++ ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || eval $as_mkdir_p || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" ++ ++ ++} # as_fn_mkdir_p ++ ++# as_fn_executable_p FILE ++# ----------------------- ++# Test if FILE is an executable regular file. ++as_fn_executable_p () ++{ ++ test -f "$1" && test -x "$1" ++} # as_fn_executable_p ++# as_fn_append VAR VALUE ++# ---------------------- ++# Append the text in VALUE to the end of the definition contained in VAR. Take ++# advantage of any shell optimizations that allow amortized linear growth over ++# repeated appends, instead of the typical quadratic growth present in naive ++# implementations. ++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : ++ eval 'as_fn_append () ++ { ++ eval $1+=\$2 ++ }' ++else ++ as_fn_append () ++ { ++ eval $1=\$$1\$2 ++ } ++fi # as_fn_append ++ ++# as_fn_arith ARG... ++# ------------------ ++# Perform arithmetic evaluation on the ARGs, and store the result in the ++# global $as_val. Take advantage of shells that can avoid forks. The arguments ++# must be portable across $(()) and expr. ++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : ++ eval 'as_fn_arith () ++ { ++ as_val=$(( $* )) ++ }' ++else ++ as_fn_arith () ++ { ++ as_val=`expr "$@" || test $? -eq 1` ++ } ++fi # as_fn_arith ++ ++ ++# as_fn_error STATUS ERROR [LINENO LOG_FD] ++# ---------------------------------------- ++# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are ++# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ++# script with STATUS, using 1 if that was 0. ++as_fn_error () ++{ ++ as_status=$1; test $as_status -eq 0 && as_status=1 ++ if test "$4"; then ++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 ++ fi ++ $as_echo "$as_me: error: $2" >&2 ++ as_fn_exit $as_status ++} # as_fn_error ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++ ++ as_lineno_1=$LINENO as_lineno_1a=$LINENO ++ as_lineno_2=$LINENO as_lineno_2a=$LINENO ++ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && ++ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { ++ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | ++ sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno ++ N ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ ++ t loop ++ s/-\n.*// ++ ' >$as_me.lineno && ++ chmod +x "$as_me.lineno" || ++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } ++ ++ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have ++ # already done that, so ensure we don't try to do so again and fall ++ # in an infinite loop. This has already happened in practice. ++ _as_can_reexec=no; export _as_can_reexec ++ # Don't try to exec as it changes $[0], causing all sort of problems ++ # (the dirname of $[0] is not the place where we might find the ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" ++ # Exit status is that of the last command. ++ exit ++} ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in #((((( ++-n*) ++ case `echo 'xy\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ xy) ECHO_C='\c';; ++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ++ ECHO_T=' ';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++ ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir 2>/dev/null ++fi ++if (echo >conf$$.file) 2>/dev/null; then ++ if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -pR'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -pR' ++ elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++ else ++ as_ln_s='cp -pR' ++ fi ++else ++ as_ln_s='cp -pR' ++fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null ++ ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p='mkdir -p "$as_dir"' ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false ++fi ++ ++as_test_x='test -x' ++as_executable_p=as_fn_executable_p ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++test -n "$DJDIR" || exec 7<&0 </dev/null ++exec 6>&1 ++ ++# Name of the host. ++# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, ++# so uname gets run too. ++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` ++ ++# ++# Initializations. ++# + ac_default_prefix=/usr/local +-# Any additions from configure.in: +-ac_help="$ac_help +---disable-timesync exclude support for timesync protocol" +-ac_help="$ac_help +---enable-pubdir=/path include support for a public writeable directory" +-ac_help="$ac_help +---disable-mkdir disable support for creating directories (lrz)" +-ac_help="$ac_help +---enable-syslog=FACILITY,{force,default,optional} include syslogsupport" +-ac_help="$ac_help +- --disable-nls do not use Native Language Support" +-ac_help="$ac_help +- --with-included-gettext use the GNU gettext library included here" +-ac_help="$ac_help +- --with-catgets use catgets functions if available" ++ac_clean_files= ++ac_config_libobj_dir=. ++LIBOBJS= ++cross_compiling=no ++subdirs= ++MFLAGS= ++MAKEFLAGS= ++ ++# Identity of this package. ++PACKAGE_NAME= ++PACKAGE_TARNAME= ++PACKAGE_VERSION= ++PACKAGE_STRING= ++PACKAGE_BUGREPORT= ++PACKAGE_URL= ++ ++ac_unique_file="src/crctab.c" ++# Factoring default headers for most tests. ++ac_includes_default="\ ++#include <stdio.h> ++#ifdef HAVE_SYS_TYPES_H ++# include <sys/types.h> ++#endif ++#ifdef HAVE_SYS_STAT_H ++# include <sys/stat.h> ++#endif ++#ifdef STDC_HEADERS ++# include <stdlib.h> ++# include <stddef.h> ++#else ++# ifdef HAVE_STDLIB_H ++# include <stdlib.h> ++# endif ++#endif ++#ifdef HAVE_STRING_H ++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H ++# include <memory.h> ++# endif ++# include <string.h> ++#endif ++#ifdef HAVE_STRINGS_H ++# include <strings.h> ++#endif ++#ifdef HAVE_INTTYPES_H ++# include <inttypes.h> ++#endif ++#ifdef HAVE_STDINT_H ++# include <stdint.h> ++#endif ++#ifdef HAVE_UNISTD_H ++# include <unistd.h> ++#endif" ++ ++ac_header_list= ++gt_needs= ++ac_subst_vars='am__EXEEXT_FALSE ++am__EXEEXT_TRUE ++LTLIBOBJS ++POSUB ++LTLIBINTL ++LIBINTL ++INTLLIBS ++LTLIBICONV ++LIBICONV ++INTL_MACOSX_LIBS ++host_os ++host_vendor ++host_cpu ++host ++build_os ++build_vendor ++build_cpu ++build ++XGETTEXT_EXTRA_OPTIONS ++MSGMERGE_FOR_MSGFMT_OPTION ++MSGMERGE ++XGETTEXT_015 ++XGETTEXT ++GMSGFMT_015 ++GMSGFMT ++MSGFMT ++GETTEXT_MACRO_VERSION ++USE_NLS ++SED ++LIBOBJS ++LIBOBJS ++ALLOCA ++RANLIB ++EGREP ++GREP ++CPP ++am__fastdepCC_FALSE ++am__fastdepCC_TRUE ++CCDEPMODE ++am__nodep ++AMDEPBACKSLASH ++AMDEP_FALSE ++AMDEP_TRUE ++am__include ++DEPDIR ++OBJEXT ++EXEEXT ++ac_ct_CC ++CPPFLAGS ++LDFLAGS ++CFLAGS ++CC ++ENABLE_TIMESYNC ++AM_BACKSLASH ++AM_DEFAULT_VERBOSITY ++AM_DEFAULT_V ++AM_V ++am__untar ++am__tar ++AMTAR ++am__leading_dot ++SET_MAKE ++AWK ++mkdir_p ++MKDIR_P ++INSTALL_STRIP_PROGRAM ++STRIP ++install_sh ++MAKEINFO ++AUTOHEADER ++AUTOMAKE ++AUTOCONF ++ACLOCAL ++VERSION ++PACKAGE ++CYGPATH_W ++am__isrc ++INSTALL_DATA ++INSTALL_SCRIPT ++INSTALL_PROGRAM ++target_alias ++host_alias ++build_alias ++LIBS ++ECHO_T ++ECHO_N ++ECHO_C ++DEFS ++mandir ++localedir ++libdir ++psdir ++pdfdir ++dvidir ++htmldir ++infodir ++docdir ++oldincludedir ++includedir ++localstatedir ++sharedstatedir ++sysconfdir ++datadir ++datarootdir ++libexecdir ++sbindir ++bindir ++program_transform_name ++prefix ++exec_prefix ++PACKAGE_URL ++PACKAGE_BUGREPORT ++PACKAGE_STRING ++PACKAGE_VERSION ++PACKAGE_TARNAME ++PACKAGE_NAME ++PATH_SEPARATOR ++SHELL ++am__quote' ++ac_subst_files='' ++ac_user_opts=' ++enable_option_checking ++enable_silent_rules ++enable_timesync ++enable_pubdir ++enable_mkdir ++enable_syslog ++enable_dependency_tracking ++enable_nls ++with_gnu_ld ++enable_rpath ++with_libiconv_prefix ++with_libintl_prefix ++' ++ ac_precious_vars='build_alias ++host_alias ++target_alias ++CC ++CFLAGS ++LDFLAGS ++LIBS ++CPPFLAGS ++CPP' ++ + + # Initialize some variables set by options. ++ac_init_help= ++ac_init_version=false ++ac_unrecognized_opts= ++ac_unrecognized_sep= + # The variables have the same names as the options, with + # dashes changed to underlines. +-build=NONE +-cache_file=./config.cache ++cache_file=/dev/null + exec_prefix=NONE +-host=NONE + no_create= +-nonopt=NONE + no_recursion= + prefix=NONE + program_prefix=NONE +@@ -43,93 +752,132 @@ program_transform_name=s,x,x, + silent= + site= + srcdir= +-target=NONE + verbose= + x_includes=NONE + x_libraries=NONE ++ ++# Installation directory options. ++# These are left unexpanded so users can "make install exec_prefix=/foo" ++# and all the variables that are supposed to be based on exec_prefix ++# by default will actually change. ++# Use braces instead of parens because sh, perl, etc. also accept them. ++# (The list follows the same order as the GNU Coding Standards.) + bindir='${exec_prefix}/bin' + sbindir='${exec_prefix}/sbin' + libexecdir='${exec_prefix}/libexec' +-datadir='${prefix}/share' ++datarootdir='${prefix}/share' ++datadir='${datarootdir}' + sysconfdir='${prefix}/etc' + sharedstatedir='${prefix}/com' + localstatedir='${prefix}/var' +-libdir='${exec_prefix}/lib' + includedir='${prefix}/include' + oldincludedir='/usr/include' +-infodir='${prefix}/info' +-mandir='${prefix}/man' +- +-# Initialize some other variables. +-subdirs= +-MFLAGS= MAKEFLAGS= +-# Maximum number of lines to put in a shell here document. +-ac_max_here_lines=12 ++docdir='${datarootdir}/doc/${PACKAGE}' ++infodir='${datarootdir}/info' ++htmldir='${docdir}' ++dvidir='${docdir}' ++pdfdir='${docdir}' ++psdir='${docdir}' ++libdir='${exec_prefix}/lib' ++localedir='${datarootdir}/locale' ++mandir='${datarootdir}/man' + + ac_prev= ++ac_dashdash= + for ac_option + do +- + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then +- eval "$ac_prev=\$ac_option" ++ eval $ac_prev=\$ac_option + ac_prev= + continue + fi + +- case "$ac_option" in +- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; +- *) ac_optarg= ;; ++ case $ac_option in ++ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *=) ac_optarg= ;; ++ *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + +- case "$ac_option" in ++ case $ac_dashdash$ac_option in ++ --) ++ ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) +- bindir="$ac_optarg" ;; ++ bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) +- ac_prev=build ;; ++ ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) +- build="$ac_optarg" ;; ++ build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) +- cache_file="$ac_optarg" ;; ++ cache_file=$ac_optarg ;; ++ ++ --config-cache | -C) ++ cache_file=config.cache ;; + +- -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ++ -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; +- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ +- | --da=*) +- datadir="$ac_optarg" ;; ++ -datadir=* | --datadir=* | --datadi=* | --datad=*) ++ datadir=$ac_optarg ;; ++ ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ ++ | --dataroo | --dataro | --datar) ++ ac_prev=datarootdir ;; ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) ++ datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) +- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` ++ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. +- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then +- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } +- fi +- ac_feature=`echo $ac_feature| sed 's/-/_/g'` +- eval "enable_${ac_feature}=no" ;; ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid feature name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"enable_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval enable_$ac_useropt=no ;; ++ ++ -docdir | --docdir | --docdi | --doc | --do) ++ ac_prev=docdir ;; ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) ++ docdir=$ac_optarg ;; ++ ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ++ ac_prev=dvidir ;; ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) ++ dvidir=$ac_optarg ;; + + -enable-* | --enable-*) +- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` ++ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then +- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } +- fi +- ac_feature=`echo $ac_feature| sed 's/-/_/g'` +- case "$ac_option" in +- *=*) ;; +- *) ac_optarg=yes ;; ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid feature name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"enable_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; + esac +- eval "enable_${ac_feature}='$ac_optarg'" ;; ++ eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ +@@ -138,116 +886,77 @@ do + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) +- exec_prefix="$ac_optarg" ;; ++ exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + +- -help | --help | --hel | --he) +- # Omit some internal or obsolete options to make the list less imposing. +- # This message is too long to be a string in the A/UX 3.1 sh. +- cat << EOF +-Usage: configure [options] [host] +-Options: [defaults in brackets after descriptions] +-Configuration: +- --cache-file=FILE cache test results in FILE +- --help print this message +- --no-create do not create output files +- --quiet, --silent do not print \`checking...' messages +- --version print the version of autoconf that created configure +-Directory and file names: +- --prefix=PREFIX install architecture-independent files in PREFIX +- [$ac_default_prefix] +- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX +- [same as prefix] +- --bindir=DIR user executables in DIR [EPREFIX/bin] +- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] +- --libexecdir=DIR program executables in DIR [EPREFIX/libexec] +- --datadir=DIR read-only architecture-independent data in DIR +- [PREFIX/share] +- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] +- --sharedstatedir=DIR modifiable architecture-independent data in DIR +- [PREFIX/com] +- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] +- --libdir=DIR object code libraries in DIR [EPREFIX/lib] +- --includedir=DIR C header files in DIR [PREFIX/include] +- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] +- --infodir=DIR info documentation in DIR [PREFIX/info] +- --mandir=DIR man documentation in DIR [PREFIX/man] +- --srcdir=DIR find the sources in DIR [configure dir or ..] +- --program-prefix=PREFIX prepend PREFIX to installed program names +- --program-suffix=SUFFIX append SUFFIX to installed program names +- --program-transform-name=PROGRAM +- run sed PROGRAM on installed program names +-EOF +- cat << EOF +-Host type: +- --build=BUILD configure for building on BUILD [BUILD=HOST] +- --host=HOST configure for HOST [guessed] +- --target=TARGET configure for TARGET [TARGET=HOST] +-Features and packages: +- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) +- --enable-FEATURE[=ARG] include FEATURE [ARG=yes] +- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] +- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) +- --x-includes=DIR X include files are in DIR +- --x-libraries=DIR X library files are in DIR +-EOF +- if test -n "$ac_help"; then +- echo "--enable and --with options recognized:$ac_help" +- fi +- exit 0 ;; ++ -help | --help | --hel | --he | -h) ++ ac_init_help=long ;; ++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ++ ac_init_help=recursive ;; ++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ++ ac_init_help=short ;; + + -host | --host | --hos | --ho) +- ac_prev=host ;; ++ ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) +- host="$ac_optarg" ;; ++ host_alias=$ac_optarg ;; ++ ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ++ ac_prev=htmldir ;; ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ ++ | --ht=*) ++ htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) +- includedir="$ac_optarg" ;; ++ includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) +- infodir="$ac_optarg" ;; ++ infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) +- libdir="$ac_optarg" ;; ++ libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) +- libexecdir="$ac_optarg" ;; ++ libexecdir=$ac_optarg ;; ++ ++ -localedir | --localedir | --localedi | --localed | --locale) ++ ac_prev=localedir ;; ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) ++ localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ +- | --localstate | --localstat | --localsta | --localst \ +- | --locals | --local | --loca | --loc | --lo) ++ | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ +- | --localstate=* | --localstat=* | --localsta=* | --localst=* \ +- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) +- localstatedir="$ac_optarg" ;; ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) ++ localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) +- mandir="$ac_optarg" ;; ++ mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ +- | --no-cr | --no-c) ++ | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ +@@ -261,26 +970,26 @@ EOF + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) +- oldincludedir="$ac_optarg" ;; ++ oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) +- prefix="$ac_optarg" ;; ++ prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) +- program_prefix="$ac_optarg" ;; ++ program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) +- program_suffix="$ac_optarg" ;; ++ program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ +@@ -297,7 +1006,17 @@ EOF + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) +- program_transform_name="$ac_optarg" ;; ++ program_transform_name=$ac_optarg ;; ++ ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ++ ac_prev=pdfdir ;; ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) ++ pdfdir=$ac_optarg ;; ++ ++ -psdir | --psdir | --psdi | --psd | --ps) ++ ac_prev=psdir ;; ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) ++ psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) +@@ -307,7 +1026,7 @@ EOF + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) +- sbindir="$ac_optarg" ;; ++ sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ +@@ -318,58 +1037,67 @@ EOF + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) +- sharedstatedir="$ac_optarg" ;; ++ sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) +- site="$ac_optarg" ;; ++ site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) +- srcdir="$ac_optarg" ;; ++ srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) +- sysconfdir="$ac_optarg" ;; ++ sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) +- ac_prev=target ;; ++ ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) +- target="$ac_optarg" ;; ++ target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + +- -version | --version | --versio | --versi | --vers) +- echo "configure generated by autoconf version 2.12" +- exit 0 ;; ++ -version | --version | --versio | --versi | --vers | -V) ++ ac_init_version=: ;; + + -with-* | --with-*) +- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` ++ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then +- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } +- fi +- ac_package=`echo $ac_package| sed 's/-/_/g'` +- case "$ac_option" in +- *=*) ;; +- *) ac_optarg=yes ;; ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid package name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"with_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; + esac +- eval "with_${ac_package}='$ac_optarg'" ;; ++ eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) +- ac_package=`echo $ac_option|sed -e 's/-*without-//'` ++ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. +- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then +- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } +- fi +- ac_package=`echo $ac_package| sed 's/-/_/g'` +- eval "with_${ac_package}=no" ;; ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid package name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"with_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. +@@ -380,176 +1108,1195 @@ EOF + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) +- x_includes="$ac_optarg" ;; ++ x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) +- x_libraries="$ac_optarg" ;; ++ x_libraries=$ac_optarg ;; + +- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } ++ -*) as_fn_error $? "unrecognized option: \`$ac_option' ++Try \`$0 --help' for more information" + ;; + ++ *=*) ++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` ++ # Reject names that are not valid shell variable names. ++ case $ac_envvar in #( ++ '' | [0-9]* | *[!_$as_cr_alnum]* ) ++ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; ++ esac ++ eval $ac_envvar=\$ac_optarg ++ export $ac_envvar ;; ++ + *) +- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then +- echo "configure: warning: $ac_option: invalid host type" 1>&2 +- fi +- if test "x$nonopt" != xNONE; then +- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } +- fi +- nonopt="$ac_option" ++ # FIXME: should be removed in autoconf 3.0. ++ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 ++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 ++ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac + done + + if test -n "$ac_prev"; then +- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } ++ ac_option=--`echo $ac_prev | sed 's/_/-/g'` ++ as_fn_error $? "missing argument to $ac_option" + fi + +-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 +- +-# File descriptor usage: +-# 0 standard input +-# 1 file creation +-# 2 errors and warnings +-# 3 some systems may open it to /dev/tty +-# 4 used on the Kubota Titan +-# 6 checking for... messages and results +-# 5 compiler messages saved in config.log +-if test "$silent" = yes; then +- exec 6>/dev/null +-else +- exec 6>&1 ++if test -n "$ac_unrecognized_opts"; then ++ case $enable_option_checking in ++ no) ;; ++ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; ++ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; ++ esac + fi +-exec 5>./config.log + +-echo "\ +-This file contains any messages produced by compilers while +-running configure, to aid debugging if configure makes a mistake. +-" 1>&5 +- +-# Strip out --no-create and --no-recursion so they do not pile up. +-# Also quote any args containing shell metacharacters. +-ac_configure_args= +-for ac_arg ++# Check all directory arguments for consistency. ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ ++ datadir sysconfdir sharedstatedir localstatedir includedir \ ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ ++ libdir localedir mandir + do +- case "$ac_arg" in +- -no-create | --no-create | --no-creat | --no-crea | --no-cre \ +- | --no-cr | --no-c) ;; +- -no-recursion | --no-recursion | --no-recursio | --no-recursi \ +- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) +- ac_configure_args="$ac_configure_args '$ac_arg'" ;; +- *) ac_configure_args="$ac_configure_args $ac_arg" ;; ++ eval ac_val=\$$ac_var ++ # Remove trailing slashes. ++ case $ac_val in ++ */ ) ++ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` ++ eval $ac_var=\$ac_val;; ++ esac ++ # Be sure to have absolute directory names. ++ case $ac_val in ++ [\\/$]* | ?:[\\/]* ) continue;; ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac ++ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" + done + +-# NLS nuisances. +-# Only set these to C if already set. These must not be set unconditionally +-# because not all systems understand e.g. LANG=C (notably SCO). +-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! +-# Non-C LC_CTYPE values break the ctype check. +-if test "${LANG+set}" = set; then LANG=C; export LANG; fi +-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi ++# There might be people who depend on the old broken behavior: `$host' ++# used to hold the argument of --host etc. ++# FIXME: To remove some day. ++build=$build_alias ++host=$host_alias ++target=$target_alias ++ ++# FIXME: To remove some day. ++if test "x$host_alias" != x; then ++ if test "x$build_alias" = x; then ++ cross_compiling=maybe ++ elif test "x$build_alias" != "x$host_alias"; then ++ cross_compiling=yes ++ fi ++fi ++ ++ac_tool_prefix= ++test -n "$host_alias" && ac_tool_prefix=$host_alias- ++ ++test "$silent" = yes && exec 6>/dev/null ++ ++ ++ac_pwd=`pwd` && test -n "$ac_pwd" && ++ac_ls_di=`ls -di .` && ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || ++ as_fn_error $? "working directory cannot be determined" ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" || ++ as_fn_error $? "pwd does not report name of working directory" + +-# confdefs.h avoids OS command line length limits that DEFS can exceed. +-rm -rf conftest* confdefs.h +-# AIX cpp loses on an empty file, so make sure it contains at least a newline. +-echo > confdefs.h +- +-# A filename unique to this package, relative to the directory that +-# configure is in, which we can look for to find out if srcdir is correct. +-ac_unique_file=src/crctab.c + + # Find the source files, if location was not specified. + if test -z "$srcdir"; then + ac_srcdir_defaulted=yes +- # Try the directory containing this script, then its parent. +- ac_prog=$0 +- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` +- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. ++ # Try the directory containing this script, then the parent directory. ++ ac_confdir=`$as_dirname -- "$as_myself" || ++$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_myself" : 'X\(//\)[^/]' \| \ ++ X"$as_myself" : 'X\(//\)$' \| \ ++ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_myself" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + srcdir=$ac_confdir +- if test ! -r $srcdir/$ac_unique_file; then ++ if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi + else + ac_srcdir_defaulted=no + fi +-if test ! -r $srcdir/$ac_unique_file; then +- if test "$ac_srcdir_defaulted" = yes; then +- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } +- else +- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } +- fi ++if test ! -r "$srcdir/$ac_unique_file"; then ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." ++ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" ++fi ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ++ac_abs_confdir=`( ++ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" ++ pwd)` ++# When building in place, set srcdir=. ++if test "$ac_abs_confdir" = "$ac_pwd"; then ++ srcdir=. ++fi ++# Remove unnecessary trailing slashes from srcdir. ++# Double slashes in file names in object file debugging info ++# mess up M-x gdb in Emacs. ++case $srcdir in ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; ++esac ++for ac_var in $ac_precious_vars; do ++ eval ac_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_env_${ac_var}_value=\$${ac_var} ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_cv_env_${ac_var}_value=\$${ac_var} ++done ++ ++# ++# Report the --help message. ++# ++if test "$ac_init_help" = "long"; then ++ # Omit some internal or obsolete options to make the list less imposing. ++ # This message is too long to be a string in the A/UX 3.1 sh. ++ cat <<_ACEOF ++\`configure' configures this package to adapt to many kinds of systems. ++ ++Usage: $0 [OPTION]... [VAR=VALUE]... ++ ++To assign environment variables (e.g., CC, CFLAGS...), specify them as ++VAR=VALUE. See below for descriptions of some of the useful variables. ++ ++Defaults for the options are specified in brackets. ++ ++Configuration: ++ -h, --help display this help and exit ++ --help=short display options specific to this package ++ --help=recursive display the short help of all the included packages ++ -V, --version display version information and exit ++ -q, --quiet, --silent do not print \`checking ...' messages ++ --cache-file=FILE cache test results in FILE [disabled] ++ -C, --config-cache alias for \`--cache-file=config.cache' ++ -n, --no-create do not create output files ++ --srcdir=DIR find the sources in DIR [configure dir or \`..'] ++ ++Installation directories: ++ --prefix=PREFIX install architecture-independent files in PREFIX ++ [$ac_default_prefix] ++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX ++ [PREFIX] ++ ++By default, \`make install' will install all the files in ++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify ++an installation prefix other than \`$ac_default_prefix' using \`--prefix', ++for instance \`--prefix=\$HOME'. ++ ++For better control, use the options below. ++ ++Fine tuning of the installation directories: ++ --bindir=DIR user executables [EPREFIX/bin] ++ --sbindir=DIR system admin executables [EPREFIX/sbin] ++ --libexecdir=DIR program executables [EPREFIX/libexec] ++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] ++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] ++ --localstatedir=DIR modifiable single-machine data [PREFIX/var] ++ --libdir=DIR object code libraries [EPREFIX/lib] ++ --includedir=DIR C header files [PREFIX/include] ++ --oldincludedir=DIR C header files for non-gcc [/usr/include] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] ++_ACEOF ++ ++ cat <<\_ACEOF ++ ++Program names: ++ --program-prefix=PREFIX prepend PREFIX to installed program names ++ --program-suffix=SUFFIX append SUFFIX to installed program names ++ --program-transform-name=PROGRAM run sed PROGRAM on installed program names ++ ++System types: ++ --build=BUILD configure for building on BUILD [guessed] ++ --host=HOST cross-compile to build programs to run on HOST [BUILD] ++_ACEOF + fi +-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +-# Prefer explicitly selected file to automatically selected ones. +-if test -z "$CONFIG_SITE"; then +- if test "x$prefix" != xNONE; then +- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" +- else +- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" ++if test -n "$ac_init_help"; then ++ ++ cat <<\_ACEOF ++ ++Optional Features: ++ --disable-option-checking ignore unrecognized --enable/--with options ++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) ++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] ++ --enable-silent-rules less verbose build output (undo: "make V=1") ++ --disable-silent-rules verbose build output (undo: "make V=0") ++--disable-timesync exclude support for timesync protocol ++--enable-pubdir=/path include support for a public writeable directory ++--disable-mkdir disable support for creating directories (lrz) ++--enable-syslog=FACILITY,{force,default,optional} include syslogsupport ++ --enable-dependency-tracking ++ do not reject slow dependency extractors ++ --disable-dependency-tracking ++ speeds up one-time build ++ --disable-nls do not use Native Language Support ++ --disable-rpath do not hardcode runtime library paths ++ ++Optional Packages: ++ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] ++ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) ++ --with-gnu-ld assume the C compiler uses GNU ld [default=no] ++ --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib ++ --without-libiconv-prefix don't search for libiconv in includedir and libdir ++ --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib ++ --without-libintl-prefix don't search for libintl in includedir and libdir ++ ++Some influential environment variables: ++ CC C compiler command ++ CFLAGS C compiler flags ++ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a ++ nonstandard directory <lib dir> ++ LIBS libraries to pass to the linker, e.g. -l<library> ++ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if ++ you have headers in a nonstandard directory <include dir> ++ CPP C preprocessor ++ ++Use these variables to override the choices made by `configure' or to help ++it to find libraries and programs with nonstandard names/locations. ++ ++Report bugs to the package provider. ++_ACEOF ++ac_status=$? ++fi ++ ++if test "$ac_init_help" = "recursive"; then ++ # If there are subdirs, report their specific --help. ++ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue ++ test -d "$ac_dir" || ++ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || ++ continue ++ ac_builddir=. ++ ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix ++ ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix ++ ++ cd "$ac_dir" || { ac_status=$?; continue; } ++ # Check for guested configure. ++ if test -f "$ac_srcdir/configure.gnu"; then ++ echo && ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive ++ elif test -f "$ac_srcdir/configure"; then ++ echo && ++ $SHELL "$ac_srcdir/configure" --help=recursive ++ else ++ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 ++ fi || ac_status=$? ++ cd "$ac_pwd" || { ac_status=$?; break; } ++ done ++fi ++ ++test -n "$ac_init_help" && exit $ac_status ++if $ac_init_version; then ++ cat <<\_ACEOF ++configure ++generated by GNU Autoconf 2.69 ++ ++Copyright (C) 2012 Free Software Foundation, Inc. ++This configure script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it. ++_ACEOF ++ exit ++fi ++ ++## ------------------------ ## ++## Autoconf initialization. ## ++## ------------------------ ## ++ ++# ac_fn_c_try_compile LINENO ++# -------------------------- ++# Try to compile conftest.$ac_ext, and return whether this succeeded. ++ac_fn_c_try_compile () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ rm -f conftest.$ac_objext ++ if { { ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compile") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err + fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 ++fi ++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno ++ as_fn_set_status $ac_retval ++ ++} # ac_fn_c_try_compile ++ ++# ac_fn_c_try_cpp LINENO ++# ---------------------- ++# Try to preprocess conftest.$ac_ext, and return whether this succeeded. ++ac_fn_c_try_cpp () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ if { { ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } > conftest.i && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 ++fi ++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno ++ as_fn_set_status $ac_retval ++ ++} # ac_fn_c_try_cpp ++ ++# ac_fn_c_try_link LINENO ++# ----------------------- ++# Try to link conftest.$ac_ext, and return whether this succeeded. ++ac_fn_c_try_link () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ rm -f conftest.$ac_objext conftest$ac_exeext ++ if { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && { ++ test "$cross_compiling" = yes || ++ test -x conftest$ac_exeext ++ }; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 ++fi ++ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information ++ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would ++ # interfere with the next link command; also delete a directory that is ++ # left behind by Apple's compiler. We do this before executing the actions. ++ rm -rf conftest.dSYM conftest_ipa8_conftest.oo ++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno ++ as_fn_set_status $ac_retval ++ ++} # ac_fn_c_try_link ++ ++# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES ++# ------------------------------------------------------- ++# Tests whether HEADER exists, giving a warning if it cannot be compiled using ++# the include files in INCLUDES and setting the cache variable VAR ++# accordingly. ++ac_fn_c_check_header_mongrel () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ if eval \${$3+:} false; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if eval \${$3+:} false; then : ++ $as_echo_n "(cached) " >&6 ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++else ++ # Is the header compilable? ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 ++$as_echo_n "checking $2 usability... " >&6; } ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$4 ++#include <$2> ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_header_compiler=yes ++else ++ ac_header_compiler=no ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 ++$as_echo "$ac_header_compiler" >&6; } ++ ++# Is the header present? ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 ++$as_echo_n "checking $2 presence... " >&6; } ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <$2> ++_ACEOF ++if ac_fn_c_try_cpp "$LINENO"; then : ++ ac_header_preproc=yes ++else ++ ac_header_preproc=no ++fi ++rm -f conftest.err conftest.i conftest.$ac_ext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 ++$as_echo "$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( ++ yes:no: ) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 ++$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 ++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ++ ;; ++ no:yes:* ) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 ++$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 ++$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 ++$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 ++$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 ++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ++ ;; ++esac ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if eval \${$3+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ eval "$3=\$ac_header_compiler" ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++fi ++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno ++ ++} # ac_fn_c_check_header_mongrel ++ ++# ac_fn_c_try_run LINENO ++# ---------------------- ++# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes ++# that executables *can* be run. ++ac_fn_c_try_run () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ if { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' ++ { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; }; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: program exited with status $ac_status" >&5 ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=$ac_status ++fi ++ rm -rf conftest.dSYM conftest_ipa8_conftest.oo ++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno ++ as_fn_set_status $ac_retval ++ ++} # ac_fn_c_try_run ++ ++# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES ++# ------------------------------------------------------- ++# Tests whether HEADER exists and can be compiled using the include files in ++# INCLUDES, setting the cache variable VAR accordingly. ++ac_fn_c_check_header_compile () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if eval \${$3+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$4 ++#include <$2> ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ eval "$3=yes" ++else ++ eval "$3=no" ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno ++ ++} # ac_fn_c_check_header_compile ++ ++# ac_fn_c_check_type LINENO TYPE VAR INCLUDES ++# ------------------------------------------- ++# Tests whether TYPE exists after having included INCLUDES, setting cache ++# variable VAR accordingly. ++ac_fn_c_check_type () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if eval \${$3+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ eval "$3=no" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$4 ++int ++main () ++{ ++if (sizeof ($2)) ++ return 0; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$4 ++int ++main () ++{ ++if (sizeof (($2))) ++ return 0; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ++else ++ eval "$3=yes" ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno ++ ++} # ac_fn_c_check_type ++ ++# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES ++# ---------------------------------------------------- ++# Tries to find if the field MEMBER exists in type AGGR, after including ++# INCLUDES, setting cache variable VAR accordingly. ++ac_fn_c_check_member () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5 ++$as_echo_n "checking for $2.$3... " >&6; } ++if eval \${$4+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$5 ++int ++main () ++{ ++static $2 ac_aggr; ++if (ac_aggr.$3) ++return 0; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ eval "$4=yes" ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$5 ++int ++main () ++{ ++static $2 ac_aggr; ++if (sizeof ac_aggr.$3) ++return 0; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ eval "$4=yes" ++else ++ eval "$4=no" ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-for ac_site_file in $CONFIG_SITE; do +- if test -r "$ac_site_file"; then +- echo "loading site script $ac_site_file" +- . "$ac_site_file" ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++eval ac_res=\$$4 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno ++ ++} # ac_fn_c_check_member ++ ++# ac_fn_c_check_func LINENO FUNC VAR ++# ---------------------------------- ++# Tests whether FUNC exists, setting the cache variable VAR accordingly ++ac_fn_c_check_func () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if eval \${$3+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++/* Define $2 to an innocuous variant, in case <limits.h> declares $2. ++ For example, HP-UX 11i <limits.h> declares gettimeofday. */ ++#define $2 innocuous_$2 ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $2 (); below. ++ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since ++ <limits.h> exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include <limits.h> ++#else ++# include <assert.h> ++#endif ++ ++#undef $2 ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $2 (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$2 || defined __stub___$2 ++choke me ++#endif ++ ++int ++main () ++{ ++return $2 (); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ eval "$3=yes" ++else ++ eval "$3=no" ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno ++ ++} # ac_fn_c_check_func ++cat >config.log <<_ACEOF ++This file contains any messages produced by compilers while ++running configure, to aid debugging if configure makes a mistake. ++ ++It was created by $as_me, which was ++generated by GNU Autoconf 2.69. Invocation command line was ++ ++ $ $0 $@ ++ ++_ACEOF ++exec 5>>config.log ++{ ++cat <<_ASUNAME ++## --------- ## ++## Platform. ## ++## --------- ## ++ ++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` ++uname -m = `(uname -m) 2>/dev/null || echo unknown` ++uname -r = `(uname -r) 2>/dev/null || echo unknown` ++uname -s = `(uname -s) 2>/dev/null || echo unknown` ++uname -v = `(uname -v) 2>/dev/null || echo unknown` ++ ++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` ++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` ++ ++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` ++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` ++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` ++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` ++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` ++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` ++ ++_ASUNAME ++ ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ $as_echo "PATH: $as_dir" ++ done ++IFS=$as_save_IFS ++ ++} >&5 ++ ++cat >&5 <<_ACEOF ++ ++ ++## ----------- ## ++## Core tests. ## ++## ----------- ## ++ ++_ACEOF ++ ++ ++# Keep a trace of the command line. ++# Strip out --no-create and --no-recursion so they do not pile up. ++# Strip out --silent because we don't want to record it for future runs. ++# Also quote any args containing shell meta-characters. ++# Make two passes to allow for proper duplicate-argument suppression. ++ac_configure_args= ++ac_configure_args0= ++ac_configure_args1= ++ac_must_keep_next=false ++for ac_pass in 1 2 ++do ++ for ac_arg ++ do ++ case $ac_arg in ++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ continue ;; ++ *\'*) ++ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ esac ++ case $ac_pass in ++ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; ++ 2) ++ as_fn_append ac_configure_args1 " '$ac_arg'" ++ if test $ac_must_keep_next = true; then ++ ac_must_keep_next=false # Got value, back to normal. ++ else ++ case $ac_arg in ++ *=* | --config-cache | -C | -disable-* | --disable-* \ ++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ ++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ ++ | -with-* | --with-* | -without-* | --without-* | --x) ++ case "$ac_configure_args0 " in ++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; ++ esac ++ ;; ++ -* ) ac_must_keep_next=true ;; ++ esac ++ fi ++ as_fn_append ac_configure_args " '$ac_arg'" ++ ;; ++ esac ++ done ++done ++{ ac_configure_args0=; unset ac_configure_args0;} ++{ ac_configure_args1=; unset ac_configure_args1;} ++ ++# When interrupted or exit'd, cleanup temporary files, and complete ++# config.log. We remove comments because anyway the quotes in there ++# would cause problems or look ugly. ++# WARNING: Use '\'' to represent an apostrophe within the trap. ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. ++trap 'exit_status=$? ++ # Save into config.log some information that might help in debugging. ++ { ++ echo ++ ++ $as_echo "## ---------------- ## ++## Cache variables. ## ++## ---------------- ##" ++ echo ++ # The following way of writing the cache mishandles newlines in values, ++( ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 ++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( ++ *) { eval $ac_var=; unset $ac_var;} ;; ++ esac ;; ++ esac ++ done ++ (set) 2>&1 | ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ sed -n \ ++ "s/'\''/'\''\\\\'\'''\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ++ ;; #( ++ *) ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) ++ echo ++ ++ $as_echo "## ----------------- ## ++## Output variables. ## ++## ----------------- ##" ++ echo ++ for ac_var in $ac_subst_vars ++ do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ $as_echo "$ac_var='\''$ac_val'\''" ++ done | sort ++ echo ++ ++ if test -n "$ac_subst_files"; then ++ $as_echo "## ------------------- ## ++## File substitutions. ## ++## ------------------- ##" ++ echo ++ for ac_var in $ac_subst_files ++ do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ $as_echo "$ac_var='\''$ac_val'\''" ++ done | sort ++ echo ++ fi ++ ++ if test -s confdefs.h; then ++ $as_echo "## ----------- ## ++## confdefs.h. ## ++## ----------- ##" ++ echo ++ cat confdefs.h ++ echo ++ fi ++ test "$ac_signal" != 0 && ++ $as_echo "$as_me: caught signal $ac_signal" ++ $as_echo "$as_me: exit $exit_status" ++ } >&5 ++ rm -f core *.core core.conftest.* && ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && ++ exit $exit_status ++' 0 ++for ac_signal in 1 2 13 15; do ++ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal ++done ++ac_signal=0 ++ ++# confdefs.h avoids OS command line length limits that DEFS can exceed. ++rm -f -r conftest* confdefs.h ++ ++$as_echo "/* confdefs.h */" > confdefs.h ++ ++# Predefined preprocessor variables. ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_NAME "$PACKAGE_NAME" ++_ACEOF ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_TARNAME "$PACKAGE_TARNAME" ++_ACEOF ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_VERSION "$PACKAGE_VERSION" ++_ACEOF ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_STRING "$PACKAGE_STRING" ++_ACEOF ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" ++_ACEOF ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_URL "$PACKAGE_URL" ++_ACEOF ++ ++ ++# Let the site file select an alternate cache file if it wants to. ++# Prefer an explicitly selected file to automatically selected ones. ++ac_site_file1=NONE ++if test -n "$CONFIG_SITE"; then ++ # We do not want a PATH search for config.site. ++ case $CONFIG_SITE in #(( ++ -*) ac_site_file1=./$CONFIG_SITE;; ++ */*) ac_site_file1=$CONFIG_SITE;; ++ *) ac_site_file1=./$CONFIG_SITE;; ++ esac ++fi ++for ac_site_file in $ac_site_file1 ++do ++ test "x$ac_site_file" = xNONE && continue ++ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 ++$as_echo "$as_me: loading site script $ac_site_file" >&6;} ++ sed 's/^/| /' "$ac_site_file" >&5 ++ . "$ac_site_file" \ ++ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "failed to load site script $ac_site_file ++See \`config.log' for more details" "$LINENO" 5; } + fi + done + + if test -r "$cache_file"; then +- echo "loading cache $cache_file" +- . $cache_file ++ # Some versions of bash will fail to source /dev/null (special files ++ # actually), so we avoid doing that. DJGPP emulates it as a regular file. ++ if test /dev/null != "$cache_file" && test -f "$cache_file"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 ++$as_echo "$as_me: loading cache $cache_file" >&6;} ++ case $cache_file in ++ [\\/]* | ?:[\\/]* ) . "$cache_file";; ++ *) . "./$cache_file";; ++ esac ++ fi + else +- echo "creating cache $cache_file" +- > $cache_file +-fi ++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 ++$as_echo "$as_me: creating cache $cache_file" >&6;} ++ >$cache_file ++fi ++ ++as_fn_append ac_header_list " stdlib.h" ++as_fn_append ac_header_list " unistd.h" ++as_fn_append ac_header_list " sys/param.h" ++gt_needs="$gt_needs " ++# Check that the precious variables saved in the cache have kept the same ++# value. ++ac_cache_corrupted=false ++for ac_var in $ac_precious_vars; do ++ eval ac_old_set=\$ac_cv_env_${ac_var}_set ++ eval ac_new_set=\$ac_env_${ac_var}_set ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value ++ eval ac_new_val=\$ac_env_${ac_var}_value ++ case $ac_old_set,$ac_new_set in ++ set,) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 ++$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,set) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 ++$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,);; ++ *) ++ if test "x$ac_old_val" != "x$ac_new_val"; then ++ # differences in whitespace do not lead to failure. ++ ac_old_val_w=`echo x $ac_old_val` ++ ac_new_val_w=`echo x $ac_new_val` ++ if test "$ac_old_val_w" != "$ac_new_val_w"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 ++$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ++ ac_cache_corrupted=: ++ else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 ++$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} ++ eval $ac_var=\$ac_old_val ++ fi ++ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 ++$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 ++$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} ++ fi;; ++ esac ++ # Pass precious variables to config.status. ++ if test "$ac_new_set" = set; then ++ case $ac_new_val in ++ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *) ac_arg=$ac_var=$ac_new_val ;; ++ esac ++ case " $ac_configure_args " in ++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. ++ *) as_fn_append ac_configure_args " '$ac_arg'" ;; ++ esac ++ fi ++done ++if $ac_cache_corrupted; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 ++$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} ++ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 ++fi ++## -------------------- ## ++## Main body of script. ## ++## -------------------- ## + + ac_ext=c +-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. + ac_cpp='$CPP $CPPFLAGS' +-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +-cross_compiling=$ac_cv_prog_cc_cross +- +-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then +- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. +- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then +- ac_n= ac_c=' +-' ac_t=' ' +- else +- ac_n=-n ac_c= ac_t= +- fi +-else +- ac_n= ac_c='\c' ac_t= +-fi ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + + ++am__api_version='1.16' ++ + ac_aux_dir= +-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do +- if test -f $ac_dir/install-sh; then ++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do ++ if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break +- elif test -f $ac_dir/install.sh; then ++ elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break ++ elif test -f "$ac_dir/shtool"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/shtool install -c" ++ break + fi + done + if test -z "$ac_aux_dir"; then +- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } ++ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 + fi +-ac_config_guess=$ac_aux_dir/config.guess +-ac_config_sub=$ac_aux_dir/config.sub +-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. ++ ++# These three variables are undocumented and unsupported, ++# and are intended to be withdrawn in a future Autoconf release. ++# They can cause serious problems if a builder's source tree is in a directory ++# whose full name contains unusual characters. ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ++ + + # Find a good install program. We prefer a C program (faster), + # so one script is as good as another. But avoid the broken or +@@ -558,250 +2305,546 @@ ac_configure=$ac_aux_dir/configure # Thi + # SunOS /usr/etc/install + # IRIX /sbin/install + # AIX /bin/install ++# AmigaOS /C/install, which installs bootblocks on floppy discs ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag + # AFS /usr/afsws/bin/install, which mishandles nonexistent args + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" ++# OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. +-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +-echo "configure:566: checking for a BSD compatible install" >&5 ++# Reject install programs that cannot install multiple files. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 ++$as_echo_n "checking for a BSD-compatible install... " >&6; } + if test -z "$INSTALL"; then +-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++if ${ac_cv_path_install+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +- case "$ac_dir/" in +- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; +- *) +- # OSF1 and SCO ODT 3.0 have their own names for install. +- for ac_prog in ginstall installbsd scoinst install; do +- if test -f $ac_dir/$ac_prog; then ++case $as_dir/ in #(( ++ ./ | .// | /[cC]/* | \ ++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ++ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ ++ /usr/ucb/* ) ;; ++ *) ++ # OSF1 and SCO ODT 3.0 have their own names for install. ++ # Don't use installbsd from OSF since it installs stuff as root ++ # by default. ++ for ac_prog in ginstall scoinst install; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && +- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then ++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. +- # OSF/1 installbsd also uses dspmsg, but is usable. ++ : ++ elif test $ac_prog = install && ++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # program-specific install script used by HP pwplus--don't use. + : + else +- ac_cv_path_install="$ac_dir/$ac_prog -c" +- break 2 ++ rm -rf conftest.one conftest.two conftest.dir ++ echo one > conftest.one ++ echo two > conftest.two ++ mkdir conftest.dir ++ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && ++ test -s conftest.one && test -s conftest.two && ++ test -s conftest.dir/conftest.one && ++ test -s conftest.dir/conftest.two ++ then ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 ++ fi + fi + fi + done +- ;; +- esac ++ done ++ ;; ++esac ++ + done +- IFS="$ac_save_IFS" ++IFS=$as_save_IFS ++ ++rm -rf conftest.one conftest.two conftest.dir + + fi + if test "${ac_cv_path_install+set}" = set; then +- INSTALL="$ac_cv_path_install" ++ INSTALL=$ac_cv_path_install + else +- # As a last resort, use the slow shell script. We don't cache a +- # path for INSTALL within a source directory, because that will ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is +- # removed, or if the path is relative. +- INSTALL="$ac_install_sh" ++ # removed, or if the value is a relative name. ++ INSTALL=$ac_install_sh + fi + fi +-echo "$ac_t""$INSTALL" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 ++$as_echo "$INSTALL" >&6; } + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. + test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' ++ + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 ++$as_echo_n "checking whether build environment is sane... " >&6; } ++# Reject unsafe characters in $srcdir or the absolute working directory ++# name. Accept space and tab only in the latter. ++am_lf=' ++' ++case `pwd` in ++ *[\\\"\#\$\&\'\`$am_lf]*) ++ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; ++esac ++case $srcdir in ++ *[\\\"\#\$\&\'\`$am_lf\ \ ]*) ++ as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; ++esac + +-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } + +-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 +-echo "configure:619: checking whether build environment is sane" >&5 +-# Just in case +-sleep 1 +-echo timestamp > conftestfile +-# Do `set' in a subshell so we don't clobber the current shell's +-# arguments. Must try -L first in case configure is actually a +-# symlink; some systems play weird games with the mod time of symlinks +-# (eg FreeBSD returns the mod time of the symlink's containing +-# directory). +-if ( +- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` +- if test "$*" = "X"; then +- # -L didn't work. +- set X `ls -t $srcdir/configure conftestfile` +- fi +- if test "$*" != "X $srcdir/configure conftestfile" \ +- && test "$*" != "X conftestfile $srcdir/configure"; then ++test "$program_prefix" != NONE && ++ program_transform_name="s&^&$program_prefix&;$program_transform_name" ++# Use a double $ so make ignores it. ++test "$program_suffix" != NONE && ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name" ++# Double any \ or $. ++# By default was `s,x,x', remove it if useless. ++ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' ++program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` ++ ++# Expand $ac_aux_dir to an absolute path. ++am_aux_dir=`cd "$ac_aux_dir" && pwd` ++ ++if test x"${MISSING+set}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; ++ *) ++ MISSING="\${SHELL} $am_aux_dir/missing" ;; ++ esac ++fi ++# Use eval to expand $SHELL ++if eval "$MISSING --is-lightweight"; then ++ am_missing_run="$MISSING " ++else ++ am_missing_run= ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 ++$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} ++fi + +- # If neither matched, then we have a broken ls. This can happen +- # if, for instance, CONFIG_SHELL is bash and it inherits a +- # broken ls alias from the environment. This has actually +- # happened. Such a system could not be considered "sane". +- { echo "configure: error: ls -t appears to fail. Make sure there is not a broken +-alias in your environment" 1>&2; exit 1; } +- fi ++if test x"${install_sh+set}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; ++ *) ++ install_sh="\${SHELL} $am_aux_dir/install-sh" ++ esac ++fi ++ ++# Installed binaries are usually stripped using 'strip' when the user ++# run "make install-strip". However 'strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the 'STRIP' environment variable to overrule this program. ++if test "$cross_compiling" != no; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_STRIP+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS + +- test "$2" = conftestfile +- ) +-then +- # Ok. +- : ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 ++$as_echo "$STRIP" >&6; } + else +- { echo "configure: error: newly created file is older than distributed files! +-Check your system clock" 1>&2; exit 1; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi +-rm -f conftest* +-echo "$ac_t""yes" 1>&6 +-if test "$program_transform_name" = s,x,x,; then +- program_transform_name= +-else +- # Double any \ or $. echo might interpret backslashes. +- cat <<\EOF_SED > conftestsed +-s,\\,\\\\,g; s,\$,$$,g +-EOF_SED +- program_transform_name="`echo $program_transform_name|sed -f conftestsed`" +- rm -f conftestsed ++ ++ + fi +-test "$program_prefix" != NONE && +- program_transform_name="s,^,${program_prefix},; $program_transform_name" +-# Use a double $ so make ignores it. +-test "$program_suffix" != NONE && +- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_ac_ct_STRIP+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS + +-# sed with no file args requires a program. +-test "$program_transform_name" = "" && program_transform_name="s,x,x," ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 ++$as_echo "$ac_ct_STRIP" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi + +-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 +-echo "configure:676: checking whether ${MAKE-make} sets \${MAKE}" >&5 +-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi + else +- cat > conftestmake <<\EOF +-all: +- @echo 'ac_maketemp="${MAKE}"' +-EOF +-# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` +-if test -n "$ac_maketemp"; then +- eval ac_cv_prog_make_${ac_make}_set=yes ++ STRIP="$ac_cv_prog_STRIP" ++fi ++ ++fi ++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 ++$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } ++if test -z "$MKDIR_P"; then ++ if ${ac_cv_path_mkdir+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in mkdir gmkdir; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue ++ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( ++ 'mkdir (GNU coreutils) '* | \ ++ 'mkdir (coreutils) '* | \ ++ 'mkdir (fileutils) '4.1*) ++ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext ++ break 3;; ++ esac ++ done ++ done ++ done ++IFS=$as_save_IFS ++ ++fi ++ ++ test -d ./--version && rmdir ./--version ++ if test "${ac_cv_path_mkdir+set}" = set; then ++ MKDIR_P="$ac_cv_path_mkdir -p" ++ else ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for MKDIR_P within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the value is a relative name. ++ MKDIR_P="$ac_install_sh -d" ++ fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 ++$as_echo "$MKDIR_P" >&6; } ++ ++for ac_prog in gawk mawk nawk awk ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_AWK+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$AWK"; then ++ ac_cv_prog_AWK="$AWK" # Let the user override the test. + else +- eval ac_cv_prog_make_${ac_make}_set=no ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_AWK="$ac_prog" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi + fi +-rm -f conftestmake ++AWK=$ac_cv_prog_AWK ++if test -n "$AWK"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 ++$as_echo "$AWK" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi +-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then +- echo "$ac_t""yes" 1>&6 ++ ++ ++ test -n "$AWK" && break ++done ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } ++set x ${MAKE-make} ++ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` ++if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat >conftest.make <<\_ACEOF ++SHELL = /bin/sh ++all: ++ @echo '@@@%%%=$(MAKE)=@@@%%%' ++_ACEOF ++# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. ++case `${MAKE-make} -f conftest.make 2>/dev/null` in ++ *@@@%%%=?*=@@@%%%*) ++ eval ac_cv_prog_make_${ac_make}_set=yes;; ++ *) ++ eval ac_cv_prog_make_${ac_make}_set=no;; ++esac ++rm -f conftest.make ++fi ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } + SET_MAKE= + else +- echo "$ac_t""no" 1>&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" + fi + ++rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null + +-PACKAGE=lrzsz ++# Check whether --enable-silent-rules was given. ++if test "${enable_silent_rules+set}" = set; then : ++ enableval=$enable_silent_rules; ++fi + +-VERSION=0.12.20 ++case $enable_silent_rules in # ((( ++ yes) AM_DEFAULT_VERBOSITY=0;; ++ no) AM_DEFAULT_VERBOSITY=1;; ++ *) AM_DEFAULT_VERBOSITY=1;; ++esac ++am_make=${MAKE-make} ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 ++$as_echo_n "checking whether $am_make supports nested variables... " >&6; } ++if ${am_cv_make_support_nested_variables+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if $as_echo 'TRUE=$(BAR$(V)) ++BAR0=false ++BAR1=true ++V=1 ++am__doit: ++ @$(TRUE) ++.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then ++ am_cv_make_support_nested_variables=yes ++else ++ am_cv_make_support_nested_variables=no ++fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 ++$as_echo "$am_cv_make_support_nested_variables" >&6; } ++if test $am_cv_make_support_nested_variables = yes; then ++ AM_V='$(V)' ++ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' ++else ++ AM_V=$AM_DEFAULT_VERBOSITY ++ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY ++fi ++AM_BACKSLASH='\' ++ ++if test "`cd $srcdir && pwd`" != "`pwd`"; then ++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ++ # is not polluted with repeated "-I." ++ am__isrc=' -I$(srcdir)' ++ # test to see if srcdir already configured ++ if test -f $srcdir/config.status; then ++ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 ++ fi ++fi + +-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then +- { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi + fi +-cat >> confdefs.h <<EOF ++ ++ ++# Define the identity of the package. ++ ++ PACKAGE=lrzsz ++ VERSION=0.12.20 ++ ++ ++cat >>confdefs.h <<_ACEOF + #define PACKAGE "$PACKAGE" +-EOF ++_ACEOF + +-cat >> confdefs.h <<EOF ++ ++cat >>confdefs.h <<_ACEOF + #define VERSION "$VERSION" +-EOF ++_ACEOF + ++# Some tools Automake needs. + ++ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + +-missing_dir=`cd $ac_aux_dir && pwd` +-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 +-echo "configure:722: checking for working aclocal" >&5 +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if (aclocal --version) < /dev/null > /dev/null 2>&1; then +- ACLOCAL=aclocal +- echo "$ac_t""found" 1>&6 +-else +- ACLOCAL="$missing_dir/missing aclocal" +- echo "$ac_t""missing" 1>&6 +-fi +- +-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 +-echo "configure:735: checking for working autoconf" >&5 +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if (autoconf --version) < /dev/null > /dev/null 2>&1; then +- AUTOCONF=autoconf +- echo "$ac_t""found" 1>&6 +-else +- AUTOCONF="$missing_dir/missing autoconf" +- echo "$ac_t""missing" 1>&6 +-fi +- +-echo $ac_n "checking for working automake""... $ac_c" 1>&6 +-echo "configure:748: checking for working automake" >&5 +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if (automake --version) < /dev/null > /dev/null 2>&1; then +- AUTOMAKE=automake +- echo "$ac_t""found" 1>&6 +-else +- AUTOMAKE="$missing_dir/missing automake" +- echo "$ac_t""missing" 1>&6 +-fi +- +-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 +-echo "configure:761: checking for working autoheader" >&5 +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if (autoheader --version) < /dev/null > /dev/null 2>&1; then +- AUTOHEADER=autoheader +- echo "$ac_t""found" 1>&6 +-else +- AUTOHEADER="$missing_dir/missing autoheader" +- echo "$ac_t""missing" 1>&6 +-fi +- +-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 +-echo "configure:774: checking for working makeinfo" >&5 +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then +- MAKEINFO=makeinfo +- echo "$ac_t""found" 1>&6 +-else +- MAKEINFO="$missing_dir/missing makeinfo" +- echo "$ac_t""missing" 1>&6 +-fi ++ ++AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} ++ ++ ++AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} ++ ++ ++AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} ++ ++ ++MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} ++ ++# For better backward compatibility. To be removed once Automake 1.9.x ++# dies out for good. For more background, see: ++# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html> ++# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html> ++mkdir_p='$(MKDIR_P)' ++ ++# We need awk for the "check" target (and possibly the TAP driver). The ++# system "awk" is bad on some platforms. ++# Always define AMTAR for backward compatibility. Yes, it's still used ++# in the wild :-( We should find a proper way to deprecate it ... ++AMTAR='$${TAR-tar}' + + ++# We'll loop over all known methods to create a tar archive until one works. ++_am_tools='gnutar pax cpio none' + ++am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + + + + + ++# POSIX will say in a future version that running "rm -f" with no argument ++# is OK; and we want to be able to make that assumption in our Makefile ++# recipes. So use an aggressive probe to check that the usage we want is ++# actually supported "in the wild" to an acceptable degree. ++# See automake bug#10828. ++# To make any issue more visible, cause the running configure to be aborted ++# by default if the 'rm' program in use doesn't match our expectations; the ++# user can still override this though. ++if rm -f && rm -fr && rm -rf; then : OK; else ++ cat >&2 <<'END' ++Oops! ++ ++Your 'rm' program seems unable to run without file operands specified ++on the command line, even when the '-f' option is present. This is contrary ++to the behaviour of most rm programs out there, and not conforming with ++the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542> ++ ++Please tell bug-automake@gnu.org about your system, including the value ++of your $PATH and any error possibly output before this message. This ++can help us improve future automake versions. ++ ++END ++ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then ++ echo 'Configuration will proceed anyway, since you have set the' >&2 ++ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 ++ echo >&2 ++ else ++ cat >&2 <<'END' ++Aborting the configuration process, to ensure you take notice of the issue. ++ ++You can download and install GNU coreutils to get an 'rm' implementation ++that behaves properly: <https://www.gnu.org/software/coreutils/>. ++ ++If you want to complete the configuration process using your problematic ++'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM ++to "yes", and re-run configure. ++ ++END ++ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 ++ fi ++fi ++ ++ac_config_headers="$ac_config_headers config.h" ++ ++ ++ ++ ++ + PACKAGE_VERSION="$PACKAGE-$VERSION" +-cat >> confdefs.h <<EOF ++cat >>confdefs.h <<_ACEOF + #define PACKAGE "$PACKAGE" +-EOF ++_ACEOF + +-cat >> confdefs.h <<EOF ++cat >>confdefs.h <<_ACEOF + #define VERSION "$VERSION" +-EOF ++_ACEOF + +-cat >> confdefs.h <<EOF ++cat >>confdefs.h <<_ACEOF + #define PACKAGE_VERSION "$PACKAGE_VERSION" +-EOF ++_ACEOF + + + +@@ -818,70 +2861,58 @@ case $VERSION in + esac + + +-# Check whether --enable-timesync or --disable-timesync was given. +-if test "${enable_timesync+set}" = set; then +- enableval="$enable_timesync" +- if test "$enableval" = "no" ; then ++# Check whether --enable-timesync was given. ++if test "${enable_timesync+set}" = set; then : ++ enableval=$enable_timesync; if test "$enableval" = "no" ; then + : + else +- cat >> confdefs.h <<\EOF +-#define ENABLE_TIMESYNC 1 +-EOF ++ $as_echo "#define ENABLE_TIMESYNC 1" >>confdefs.h + + fi + else +- cat >> confdefs.h <<\EOF +-#define ENABLE_TIMESYNC 1 +-EOF ++ $as_echo "#define ENABLE_TIMESYNC 1" >>confdefs.h + + fi + + +-# Check whether --enable-pubdir or --disable-pubdir was given. +-if test "${enable_pubdir+set}" = set; then +- enableval="$enable_pubdir" +- if test "$enableval" = "no" ; then +- : +- else +- cat >> confdefs.h <<EOF ++# Check whether --enable-pubdir was given. ++if test "${enable_pubdir+set}" = set; then : ++ enableval=$enable_pubdir; if test "$enableval" = "no" ; then ++ : ++ else ++ cat >>confdefs.h <<_ACEOF + #define PUBDIR "$enableval" +-EOF ++_ACEOF + + fi + fi + +-# Check whether --enable-mkdir or --disable-mkdir was given. +-if test "${enable_mkdir+set}" = set; then +- enableval="$enable_mkdir" +- if test "$enableval" = "no" ; then ++# Check whether --enable-mkdir was given. ++if test "${enable_mkdir+set}" = set; then : ++ enableval=$enable_mkdir; if test "$enableval" = "no" ; then + : + else +- cat >> confdefs.h <<\EOF +-#define ENABLE_MKDIR 1 +-EOF ++ $as_echo "#define ENABLE_MKDIR 1" >>confdefs.h + + fi + else +- cat >> confdefs.h <<\EOF +-#define ENABLE_MKDIR 1 +-EOF ++ $as_echo "#define ENABLE_MKDIR 1" >>confdefs.h + + fi + +-# Check whether --enable-syslog or --disable-syslog was given. +-if test "${enable_syslog+set}" = set; then +- enableval="$enable_syslog" +- +- if test "$enableval" = "no" ; then ++# Check whether --enable-syslog was given. ++if test "${enable_syslog+set}" = set; then : ++ enableval=$enable_syslog; ++ if test "$enableval" = "no" ; then + : + else + case "$enableval" in + *,*) + level=`echo $enableval|sed -e 's/^.*,//'` + fac=`echo $enableval|sed -e 's/,.*$//'` +- cat >> confdefs.h <<EOF ++ cat >>confdefs.h <<_ACEOF + #define ENABLE_SYSLOG $fac +-EOF ++_ACEOF + + ;; + *) +@@ -890,568 +2921,1562 @@ EOF + ;; + esac + if test "$level" = "force" ; then +- cat >> confdefs.h <<\EOF +-#define ENABLE_SYSLOG_FORCE 1 +-EOF ++ $as_echo "#define ENABLE_SYSLOG_FORCE 1" >>confdefs.h + +- else ++ else + if test "$level" = "optional" ; then + : + else +- cat >> confdefs.h <<\EOF +-#define ENABLE_SYSLOG_DEFAULT 1 +-EOF ++ $as_echo "#define ENABLE_SYSLOG_DEFAULT 1" >>confdefs.h + + fi + fi + fi + else +- +- cat >> confdefs.h <<\EOF +-#define ENABLE_SYSLOG_DEFAULT 1 +-EOF ++ ++ $as_echo "#define ENABLE_SYSLOG_DEFAULT 1" >>confdefs.h + + lookup_facility=LOG_UUCP +- ++ + fi + + +-# Extract the first word of "gcc", so it can be a program name with args. ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. ++set dummy ${ac_tool_prefix}gcc; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_CC="${ac_tool_prefix}gcc" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_CC"; then ++ ac_ct_CC=$CC ++ # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:923: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_ac_ct_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_CC"; then ++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_ac_ct_CC="gcc" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_CC=$ac_cv_prog_ac_ct_CC ++if test -n "$ac_ct_CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 ++$as_echo "$ac_ct_CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi ++else ++ CC="$ac_cv_prog_CC" ++fi ++ ++if test -z "$CC"; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++set dummy ${ac_tool_prefix}cc; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. + else +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- ac_cv_prog_CC="gcc" +- break +- fi ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_CC="${ac_tool_prefix}cc" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done + done +- IFS="$ac_save_ifs" ++IFS=$as_save_IFS ++ + fi + fi +-CC="$ac_cv_prog_CC" ++CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$ac_t""$CC" 1>&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } + else +- echo "$ac_t""no" 1>&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + ++ ++ fi ++fi + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:952: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. + else +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + ac_prog_rejected=no +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then +- ac_prog_rejected=yes +- continue +- fi +- ac_cv_prog_CC="cc" +- break +- fi ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ++ ac_prog_rejected=yes ++ continue ++ fi ++ ac_cv_prog_CC="cc" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done + done +- IFS="$ac_save_ifs" ++IFS=$as_save_IFS ++ + if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift +- if test $# -gt 0; then ++ if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift +- set dummy "$ac_dir/$ac_word" "$@" +- shift +- ac_cv_prog_CC="$@" ++ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi + fi + fi + fi +-CC="$ac_cv_prog_CC" ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$CC"; then ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in cl.exe ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_CC="$ac_tool_prefix$ac_prog" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$ac_t""$CC" 1>&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } + else +- echo "$ac_t""no" 1>&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + +- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } ++ ++ test -n "$CC" && break ++ done ++fi ++if test -z "$CC"; then ++ ac_ct_CC=$CC ++ for ac_prog in cl.exe ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_ac_ct_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_CC"; then ++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_ac_ct_CC="$ac_prog" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_CC=$ac_cv_prog_ac_ct_CC ++if test -n "$ac_ct_CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 ++$as_echo "$ac_ct_CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + +-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +-echo "configure:1000: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + +-ac_ext=c +-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +-cross_compiling=$ac_cv_prog_cc_cross +- +-cat > conftest.$ac_ext <<EOF +-#line 1010 "configure" +-#include "confdefs.h" +-main(){return(0);} +-EOF +-if { (eval echo configure:1014: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- ac_cv_prog_cc_works=yes +- # If we can't run a trivial program, we are probably using a cross compiler. +- if (./conftest; exit) 2>/dev/null; then +- ac_cv_prog_cc_cross=no ++ test -n "$ac_ct_CC" && break ++done ++ ++ if test "x$ac_ct_CC" = x; then ++ CC="" + else +- ac_cv_prog_cc_cross=yes ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC + fi ++fi ++ ++fi ++ ++ ++test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "no acceptable C compiler found in \$PATH ++See \`config.log' for more details" "$LINENO" 5; } ++ ++# Provide some information about the compiler. ++$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 ++set X $ac_compile ++ac_compiler=$2 ++for ac_option in --version -v -V -qversion; do ++ { { ac_try="$ac_compiler $ac_option >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compiler $ac_option >&5") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ sed '10a\ ++... rest of stderr output deleted ... ++ 10q' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ fi ++ rm -f conftest.er1 conftest.err ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++done ++ ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" ++# Try to create an executable without -o first, disregard a.out. ++# It will help us diagnose broken compilers, and finding out an intuition ++# of exeext. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 ++$as_echo_n "checking whether the C compiler works... " >&6; } ++ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` ++ ++# The possible output files: ++ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ++ ++ac_rmfiles= ++for ac_file in $ac_files ++do ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";; ++ esac ++done ++rm -f $ac_rmfiles ++ ++if { { ac_try="$ac_link_default" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link_default") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' ++# in a Makefile. We should not override ac_cv_exeext if it was cached, ++# so that the user can short-circuit this test for compilers unknown to ++# Autoconf. ++for ac_file in $ac_files '' ++do ++ test -f "$ac_file" || continue ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ++ ;; ++ [ab].out ) ++ # We found the default executable, but exeext='' is most ++ # certainly right. ++ break;; ++ *.* ) ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ then :; else ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ fi ++ # We set ac_cv_exeext here because the later test for it is not ++ # safe: cross compilers may not add the suffix if given an `-o' ++ # argument, so we may need to know it at that point already. ++ # Even if this section looks crufty: it has the advantage of ++ # actually working. ++ break;; ++ * ) ++ break;; ++ esac ++done ++test "$ac_cv_exeext" = no && ac_cv_exeext= ++ + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- ac_cv_prog_cc_works=no ++ ac_file='' + fi +-rm -fr conftest* ++if test -z "$ac_file"; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++$as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error 77 "C compiler cannot create executables ++See \`config.log' for more details" "$LINENO" 5; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 ++$as_echo_n "checking for C compiler default output file name... " >&6; } ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 ++$as_echo "$ac_file" >&6; } ++ac_exeext=$ac_cv_exeext ++ ++rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ++ac_clean_files=$ac_clean_files_save ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 ++$as_echo_n "checking for suffix of executables... " >&6; } ++if { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : ++ # If both `conftest.exe' and `conftest' are `present' (well, observable) ++# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will ++# work properly (i.e., refer to `conftest.exe'), while it won't with ++# `rm'. ++for ac_file in conftest.exe conftest conftest.*; do ++ test -f "$ac_file" || continue ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; ++ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ break;; ++ * ) break;; ++ esac ++done ++else ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "cannot compute suffix of executables: cannot compile and link ++See \`config.log' for more details" "$LINENO" 5; } ++fi ++rm -f conftest conftest$ac_cv_exeext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 ++$as_echo "$ac_cv_exeext" >&6; } ++ ++rm -f conftest.$ac_ext ++EXEEXT=$ac_cv_exeext ++ac_exeext=$EXEEXT ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <stdio.h> ++int ++main () ++{ ++FILE *f = fopen ("conftest.out", "w"); ++ return ferror (f) || fclose (f) != 0; + +-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +-if test $ac_cv_prog_cc_works = no; then +- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } ++ ; ++ return 0; ++} ++_ACEOF ++ac_clean_files="$ac_clean_files conftest.out" ++# Check that the compiler produces executables we can run. If not, either ++# the compiler is broken, or we cross compile. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 ++$as_echo_n "checking whether we are cross compiling... " >&6; } ++if test "$cross_compiling" != yes; then ++ { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if { ac_try='./conftest$ac_cv_exeext' ++ { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; }; then ++ cross_compiling=no ++ else ++ if test "$cross_compiling" = maybe; then ++ cross_compiling=yes ++ else ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "cannot run C compiled programs. ++If you meant to cross compile, use \`--host'. ++See \`config.log' for more details" "$LINENO" 5; } ++ fi ++ fi + fi +-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +-echo "configure:1034: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 +-cross_compiling=$ac_cv_prog_cc_cross ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 ++$as_echo "$cross_compiling" >&6; } + +-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +-echo "configure:1039: checking whether we are using GNU C" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ++ac_clean_files=$ac_clean_files_save ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 ++$as_echo_n "checking for suffix of object files... " >&6; } ++if ${ac_cv_objext+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- cat > conftest.c <<EOF +-#ifdef __GNUC__ +- yes; ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.o conftest.obj ++if { { ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compile") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : ++ for ac_file in conftest.o conftest.obj conftest.*; do ++ test -f "$ac_file" || continue; ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; ++ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` ++ break;; ++ esac ++done ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "cannot compute suffix of object files: cannot compile ++See \`config.log' for more details" "$LINENO" 5; } ++fi ++rm -f conftest.$ac_cv_objext conftest.$ac_ext ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 ++$as_echo "$ac_cv_objext" >&6; } ++OBJEXT=$ac_cv_objext ++ac_objext=$OBJEXT ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 ++$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } ++if ${ac_cv_c_compiler_gnu+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++#ifndef __GNUC__ ++ choke me + #endif +-EOF +-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1048: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +- ac_cv_prog_gcc=yes ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_compiler_gnu=yes + else +- ac_cv_prog_gcc=no +-fi ++ ac_compiler_gnu=no + fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ac_cv_c_compiler_gnu=$ac_compiler_gnu + +-echo "$ac_t""$ac_cv_prog_gcc" 1>&6 +- +-if test $ac_cv_prog_gcc = yes; then ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 ++$as_echo "$ac_cv_c_compiler_gnu" >&6; } ++if test $ac_compiler_gnu = yes; then + GCC=yes +- ac_test_CFLAGS="${CFLAGS+set}" +- ac_save_CFLAGS="$CFLAGS" +- CFLAGS= +- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +-echo "configure:1063: checking whether ${CC-cc} accepts -g" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 + else +- echo 'void f(){}' > conftest.c +-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then ++ GCC= ++fi ++ac_test_CFLAGS=${CFLAGS+set} ++ac_save_CFLAGS=$CFLAGS ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 ++$as_echo_n "checking whether $CC accepts -g... " >&6; } ++if ${ac_cv_prog_cc_g+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_save_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ ac_cv_prog_cc_g=no ++ CFLAGS="-g" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes + else +- ac_cv_prog_cc_g=no +-fi +-rm -f conftest* ++ CFLAGS="" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +-fi ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ++else ++ ac_c_werror_flag=$ac_save_c_werror_flag ++ CFLAGS="-g" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 +- if test "$ac_test_CFLAGS" = set; then +- CFLAGS="$ac_save_CFLAGS" +- elif test $ac_cv_prog_cc_g = yes; then ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_prog_cc_g=yes ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_c_werror_flag=$ac_save_c_werror_flag ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 ++$as_echo "$ac_cv_prog_cc_g" >&6; } ++if test "$ac_test_CFLAGS" = set; then ++ CFLAGS=$ac_save_CFLAGS ++elif test $ac_cv_prog_cc_g = yes; then ++ if test "$GCC" = yes; then + CFLAGS="-g -O2" + else ++ CFLAGS="-g" ++ fi ++else ++ if test "$GCC" = yes; then + CFLAGS="-O2" ++ else ++ CFLAGS= ++ fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 ++$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } ++if ${ac_cv_prog_cc_c89+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_cv_prog_cc_c89=no ++ac_save_CC=$CC ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <stdarg.h> ++#include <stdio.h> ++struct stat; ++/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ ++struct buf { int x; }; ++FILE * (*rcsopen) (struct buf *, struct stat *, int); ++static char *e (p, i) ++ char **p; ++ int i; ++{ ++ return p[i]; ++} ++static char *f (char * (*g) (char **, int), char **p, ...) ++{ ++ char *s; ++ va_list v; ++ va_start (v,p); ++ s = g (p, va_arg (v,int)); ++ va_end (v); ++ return s; ++} ++ ++/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has ++ function prototypes and stuff, but not '\xHH' hex character constants. ++ These don't provoke an error unfortunately, instead are silently treated ++ as 'x'. The following induces an error, until -std is added to get ++ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an ++ array size at least. It's necessary to write '\x00'==0 to get something ++ that's true only with -std. */ ++int osf4_cc_array ['\x00' == 0 ? 1 : -1]; ++ ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters ++ inside strings and character constants. */ ++#define FOO(x) 'x' ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; ++ ++int test (int i, double x); ++struct s1 {int (*f) (int a);}; ++struct s2 {int (*f) (double a);}; ++int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); ++int argc; ++char **argv; ++int ++main () ++{ ++return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ++ ; ++ return 0; ++} ++_ACEOF ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++do ++ CC="$ac_save_CC $ac_arg" ++ if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_prog_cc_c89=$ac_arg ++fi ++rm -f core conftest.err conftest.$ac_objext ++ test "x$ac_cv_prog_cc_c89" != "xno" && break ++done ++rm -f conftest.$ac_ext ++CC=$ac_save_CC ++ ++fi ++# AC_CACHE_VAL ++case "x$ac_cv_prog_cc_c89" in ++ x) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 ++$as_echo "none needed" >&6; } ;; ++ xno) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 ++$as_echo "unsupported" >&6; } ;; ++ *) ++ CC="$CC $ac_cv_prog_cc_c89" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 ++$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; ++esac ++if test "x$ac_cv_prog_cc_c89" != xno; then : ++ ++fi ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 ++$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } ++if ${am_cv_prog_cc_c_o+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++ # Make sure it works both with $CC and with simple cc. ++ # Following AC_PROG_CC_C_O, we do the test twice because some ++ # compilers refuse to overwrite an existing .o file with -o, ++ # though they will create one. ++ am_cv_prog_cc_c_o=yes ++ for am_i in 1 2; do ++ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 ++ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } \ ++ && test -f conftest2.$ac_objext; then ++ : OK ++ else ++ am_cv_prog_cc_c_o=no ++ break ++ fi ++ done ++ rm -f core conftest* ++ unset am_i ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 ++$as_echo "$am_cv_prog_cc_c_o" >&6; } ++if test "$am_cv_prog_cc_c_o" != yes; then ++ # Losing compiler, so override with the script. ++ # FIXME: It is wrong to rewrite CC. ++ # But if we don't then we get into trouble of one sort or another. ++ # A longer-term fix would be to have automake use am__CC in this case, ++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" ++ CC="$am_aux_dir/compile $CC" ++fi ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++DEPDIR="${am__leading_dot}deps" ++ ++ac_config_commands="$ac_config_commands depfiles" ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5 ++$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; } ++cat > confinc.mk << 'END' ++am__doit: ++ @echo this is the am__doit target >confinc.out ++.PHONY: am__doit ++END ++am__include="#" ++am__quote= ++# BSD make does it like this. ++echo '.include "confinc.mk" # ignored' > confmf.BSD ++# Other make implementations (GNU, Solaris 10, AIX) do it like this. ++echo 'include confinc.mk # ignored' > confmf.GNU ++_am_result=no ++for s in GNU BSD; do ++ { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5 ++ (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ case $?:`cat confinc.out 2>/dev/null` in #( ++ '0:this is the am__doit target') : ++ case $s in #( ++ BSD) : ++ am__include='.include' am__quote='"' ;; #( ++ *) : ++ am__include='include' am__quote='' ;; ++esac ;; #( ++ *) : ++ ;; ++esac ++ if test "$am__include" != "#"; then ++ _am_result="yes ($s style)" ++ break + fi ++done ++rm -f confinc.* confmf.* ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5 ++$as_echo "${_am_result}" >&6; } ++ ++# Check whether --enable-dependency-tracking was given. ++if test "${enable_dependency_tracking+set}" = set; then : ++ enableval=$enable_dependency_tracking; ++fi ++ ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++ am__nodep='_no' ++fi ++ if test "x$enable_dependency_tracking" != xno; then ++ AMDEP_TRUE= ++ AMDEP_FALSE='#' ++else ++ AMDEP_TRUE='#' ++ AMDEP_FALSE= ++fi ++ ++ ++ ++depcc="$CC" am_compiler_list= ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 ++$as_echo_n "checking dependency style of $depcc... " >&6; } ++if ${am_cv_CC_dependencies_compiler_type+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named 'D' -- because '-MD' means "put the output ++ # in D". ++ rm -rf conftest.dir ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_CC_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` ++ fi ++ am__universal=false ++ case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac ++ ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with ++ # Solaris 10 /bin/sh. ++ echo '/* dummy */' > sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ ++ # We check with '-c' and '-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle '-M -o', and we need to detect this. Also, some Intel ++ # versions had trouble with output in subdirs. ++ am__obj=sub/conftest.${OBJEXT-o} ++ am__minus_obj="-o $am__obj" ++ case $depmode in ++ gcc) ++ # This depmode causes a compiler race in universal mode. ++ test "$am__universal" = false || continue ++ ;; ++ nosideeffect) ++ # After this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested. ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ msvc7 | msvc7msys | msvisualcpp | msvcmsys) ++ # This compiler won't grok '-c -o', but also, the minuso test has ++ # not run yet. These depmodes are late enough in the game, and ++ # so weak that their functioning should not be impacted. ++ am__obj=conftest.${OBJEXT-o} ++ am__minus_obj= ++ ;; ++ none) break ;; ++ esac ++ if depmode=$depmode \ ++ source=sub/conftest.c object=$am__obj \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_CC_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done ++ ++ cd .. ++ rm -rf conftest.dir + else +- GCC= +- test "${CFLAGS+set}" = set || CFLAGS="-g" ++ am_cv_CC_dependencies_compiler_type=none ++fi ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 ++$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } ++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type ++ ++ if ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then ++ am__fastdepCC_TRUE= ++ am__fastdepCC_FALSE='#' ++else ++ am__fastdepCC_TRUE='#' ++ am__fastdepCC_FALSE= + fi + +-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 +-echo "configure:1091: checking how to run the C preprocessor" >&5 ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 ++$as_echo_n "checking how to run the C preprocessor... " >&6; } + # On Suns, sometimes $CPP names a directory. + if test -n "$CPP" && test -d "$CPP"; then + CPP= + fi + if test -z "$CPP"; then +-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ if ${ac_cv_prog_CPP+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- # This must be in double quotes, not single quotes, because CPP may get +- # substituted into the Makefile and "${CC-cc}" will confuse make. +- CPP="${CC-cc} -E" ++ # Double quotes because CPP needs to be expanded ++ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" ++ do ++ ac_preproc_ok=false ++for ac_c_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since ++ # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, +- # not just through cpp. +- cat > conftest.$ac_ext <<EOF +-#line 1106 "configure" +-#include "confdefs.h" +-#include <assert.h> +-Syntax Error +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:1112: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out` +-if test -z "$ac_err"; then +- : ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#ifdef __STDC__ ++# include <limits.h> ++#else ++# include <assert.h> ++#endif ++ Syntax error ++_ACEOF ++if ac_fn_c_try_cpp "$LINENO"; then : ++ ++else ++ # Broken: fails on valid input. ++continue ++fi ++rm -f conftest.err conftest.i conftest.$ac_ext ++ ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <ac_nonexistent.h> ++_ACEOF ++if ac_fn_c_try_cpp "$LINENO"; then : ++ # Broken: success on invalid input. ++continue ++else ++ # Passes both tests. ++ac_preproc_ok=: ++break ++fi ++rm -f conftest.err conftest.i conftest.$ac_ext ++ ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.i conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then : ++ break ++fi ++ ++ done ++ ac_cv_prog_CPP=$CPP ++ ++fi ++ CPP=$ac_cv_prog_CPP + else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- CPP="${CC-cc} -E -traditional-cpp" +- cat > conftest.$ac_ext <<EOF +-#line 1123 "configure" +-#include "confdefs.h" +-#include <assert.h> +-Syntax Error +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:1129: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out` +-if test -z "$ac_err"; then +- : ++ ac_cv_prog_CPP=$CPP ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 ++$as_echo "$CPP" >&6; } ++ac_preproc_ok=false ++for ac_c_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since ++ # <limits.h> exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#ifdef __STDC__ ++# include <limits.h> ++#else ++# include <assert.h> ++#endif ++ Syntax error ++_ACEOF ++if ac_fn_c_try_cpp "$LINENO"; then : ++ ++else ++ # Broken: fails on valid input. ++continue ++fi ++rm -f conftest.err conftest.i conftest.$ac_ext ++ ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <ac_nonexistent.h> ++_ACEOF ++if ac_fn_c_try_cpp "$LINENO"; then : ++ # Broken: success on invalid input. ++continue ++else ++ # Passes both tests. ++ac_preproc_ok=: ++break ++fi ++rm -f conftest.err conftest.i conftest.$ac_ext ++ ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.i conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then : ++ + else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- CPP=/lib/cpp ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "C preprocessor \"$CPP\" fails sanity check ++See \`config.log' for more details" "$LINENO" 5; } + fi +-rm -f conftest* ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 ++$as_echo_n "checking for grep that handles long lines and -e... " >&6; } ++if ${ac_cv_path_GREP+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -z "$GREP"; then ++ ac_path_GREP_found=false ++ # Loop through the user's path and test for each of PROGNAME-LIST ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in grep ggrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" ++ as_fn_executable_p "$ac_path_GREP" || continue ++# Check for GNU ac_path_GREP and select it if it is found. ++ # Check for GNU $ac_path_GREP ++case `"$ac_path_GREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; ++*) ++ ac_count=0 ++ $as_echo_n 0123456789 >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ $as_echo 'GREP' >> "conftest.nl" ++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ as_fn_arith $ac_count + 1 && ac_count=$as_val ++ if test $ac_count -gt ${ac_path_GREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_GREP="$ac_path_GREP" ++ ac_path_GREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ $ac_path_GREP_found && break 3 ++ done ++ done ++ done ++IFS=$as_save_IFS ++ if test -z "$ac_cv_path_GREP"; then ++ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 ++ fi ++else ++ ac_cv_path_GREP=$GREP + fi +-rm -f conftest* +- ac_cv_prog_CPP="$CPP" ++ + fi +- CPP="$ac_cv_prog_CPP" ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 ++$as_echo "$ac_cv_path_GREP" >&6; } ++ GREP="$ac_cv_path_GREP" ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 ++$as_echo_n "checking for egrep... " >&6; } ++if ${ac_cv_path_EGREP+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 ++ then ac_cv_path_EGREP="$GREP -E" ++ else ++ if test -z "$EGREP"; then ++ ac_path_EGREP_found=false ++ # Loop through the user's path and test for each of PROGNAME-LIST ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in egrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" ++ as_fn_executable_p "$ac_path_EGREP" || continue ++# Check for GNU ac_path_EGREP and select it if it is found. ++ # Check for GNU $ac_path_EGREP ++case `"$ac_path_EGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; ++*) ++ ac_count=0 ++ $as_echo_n 0123456789 >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ $as_echo 'EGREP' >> "conftest.nl" ++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ as_fn_arith $ac_count + 1 && ac_count=$as_val ++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_EGREP="$ac_path_EGREP" ++ ac_path_EGREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ $ac_path_EGREP_found && break 3 ++ done ++ done ++ done ++IFS=$as_save_IFS ++ if test -z "$ac_cv_path_EGREP"; then ++ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 ++ fi + else +- ac_cv_prog_CPP="$CPP" ++ ac_cv_path_EGREP=$EGREP + fi +-echo "$ac_t""$CPP" 1>&6 + +-if test $ac_cv_prog_gcc = yes; then +- echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6 +-echo "configure:1153: checking whether ${CC-cc} needs -traditional" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 ++$as_echo "$ac_cv_path_EGREP" >&6; } ++ EGREP="$ac_cv_path_EGREP" ++ ++ ++if test $ac_cv_c_compiler_gnu = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC needs -traditional" >&5 ++$as_echo_n "checking whether $CC needs -traditional... " >&6; } ++if ${ac_cv_prog_gcc_traditional+:} false; then : ++ $as_echo_n "(cached) " >&6 + else + ac_pattern="Autoconf.*'x'" +- cat > conftest.$ac_ext <<EOF +-#line 1159 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <sgtty.h> + Autoconf TIOCGETP +-EOF ++_ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "$ac_pattern" >/dev/null 2>&1; then +- rm -rf conftest* ++ $EGREP "$ac_pattern" >/dev/null 2>&1; then : + ac_cv_prog_gcc_traditional=yes + else +- rm -rf conftest* + ac_cv_prog_gcc_traditional=no + fi + rm -f conftest* + + + if test $ac_cv_prog_gcc_traditional = no; then +- cat > conftest.$ac_ext <<EOF +-#line 1177 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <termio.h> + Autoconf TCGETA +-EOF ++_ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "$ac_pattern" >/dev/null 2>&1; then +- rm -rf conftest* ++ $EGREP "$ac_pattern" >/dev/null 2>&1; then : + ac_cv_prog_gcc_traditional=yes + fi + rm -f conftest* + + fi + fi +- +-echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_gcc_traditional" >&5 ++$as_echo "$ac_cv_prog_gcc_traditional" >&6; } + if test $ac_cv_prog_gcc_traditional = yes; then + CC="$CC -traditional" + fi + fi + +-# Extract the first word of "ranlib", so it can be a program name with args. +-set dummy ranlib; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:1201: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ranlib; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_RANLIB+:} false; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. + else +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- ac_cv_prog_RANLIB="ranlib" +- break +- fi ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done + done +- IFS="$ac_save_ifs" +- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" ++IFS=$as_save_IFS ++ + fi + fi +-RANLIB="$ac_cv_prog_RANLIB" ++RANLIB=$ac_cv_prog_RANLIB + if test -n "$RANLIB"; then +- echo "$ac_t""$RANLIB" 1>&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 ++$as_echo "$RANLIB" >&6; } + else +- echo "$ac_t""no" 1>&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + +-echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 +-echo "configure:1228: checking for POSIXized ISC" >&5 +-if test -d /etc/conf/kconfig.d && +- grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 +-then +- echo "$ac_t""yes" 1>&6 +- ISC=yes # If later tests want to check for ISC. +- cat >> confdefs.h <<\EOF +-#define _POSIX_SOURCE 1 +-EOF + +- if test "$GCC" = yes; then +- CC="$CC -posix" +- else +- CC="$CC -Xp" +- fi +-else +- echo "$ac_t""no" 1>&6 +- ISC= + fi +- +-echo $ac_n "checking for AIX""... $ac_c" 1>&6 +-echo "configure:1249: checking for AIX" >&5 +-cat > conftest.$ac_ext <<EOF +-#line 1251 "configure" +-#include "confdefs.h" +-#ifdef _AIX +- yes +-#endif +- +-EOF +-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "yes" >/dev/null 2>&1; then +- rm -rf conftest* +- echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF +-#define _ALL_SOURCE 1 +-EOF +- ++if test -z "$ac_cv_prog_RANLIB"; then ++ ac_ct_RANLIB=$RANLIB ++ # Extract the first word of "ranlib", so it can be a program name with args. ++set dummy ranlib; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- rm -rf conftest* +- echo "$ac_t""no" 1>&6 +-fi +-rm -f conftest* +- ++ if test -n "$ac_ct_RANLIB"; then ++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_prog_ac_ct_RANLIB="ranlib" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS + +-ac_safe=`echo "minix/config.h" | sed 'y%./+-%__p_%'` +-echo $ac_n "checking for minix/config.h""... $ac_c" 1>&6 +-echo "configure:1274: checking for minix/config.h" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 1279 "configure" +-#include "confdefs.h" +-#include <minix/config.h> +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:1284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out` +-if test -z "$ac_err"; then +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=yes" +-else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=no" + fi +-rm -f conftest* + fi +-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- MINIX=yes ++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB ++if test -n "$ac_ct_RANLIB"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 ++$as_echo "$ac_ct_RANLIB" >&6; } + else +- echo "$ac_t""no" 1>&6 +-MINIX= ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + +-if test "$MINIX" = yes; then +- cat >> confdefs.h <<\EOF +-#define _POSIX_SOURCE 1 +-EOF +- +- cat >> confdefs.h <<\EOF +-#define _POSIX_1_SOURCE 2 +-EOF +- +- cat >> confdefs.h <<\EOF +-#define _MINIX 1 +-EOF +- ++ if test "x$ac_ct_RANLIB" = x; then ++ RANLIB=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ RANLIB=$ac_ct_RANLIB ++ fi ++else ++ RANLIB="$ac_cv_prog_RANLIB" + fi + +- +- +- +-echo $ac_n "checking for ${CC-cc} option to accept ANSI C""... $ac_c" 1>&6 +-echo "configure:1325: checking for ${CC-cc} option to accept ANSI C" >&5 +-if eval "test \"`echo '$''{'am_cv_prog_cc_stdc'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5 ++$as_echo_n "checking for library containing strerror... " >&6; } ++if ${ac_cv_search_strerror+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- am_cv_prog_cc_stdc=no +-ac_save_CC="$CC" +-# Don't try gcc -ansi; that turns off useful extensions and +-# breaks some systems' header files. +-# AIX -qlanglvl=ansi +-# Ultrix and OSF/1 -std1 +-# HP-UX -Aa -D_HPUX_SOURCE +-# SVR4 -Xc -D__EXTENSIONS__ +-for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +-do +- CC="$ac_save_CC $ac_arg" +- cat > conftest.$ac_ext <<EOF +-#line 1341 "configure" +-#include "confdefs.h" +-#include <stdarg.h> +-#include <stdio.h> +-#include <sys/types.h> +-#include <sys/stat.h> +-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +-struct buf { int x; }; +-FILE * (*rcsopen) (struct buf *, struct stat *, int); +-static char *e (p, i) +- char **p; +- int i; ++ ac_func_search_save_LIBS=$LIBS ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char strerror (); ++int ++main () + { +- return p[i]; ++return strerror (); ++ ; ++ return 0; + } +-static char *f (char * (*g) (char **, int), char **p, ...) +-{ +- char *s; +- va_list v; +- va_start (v,p); +- s = g (p, va_arg (v,int)); +- va_end (v); +- return s; +-} +-int test (int i, double x); +-struct s1 {int (*f) (int a);}; +-struct s2 {int (*f) (double a);}; +-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +-int argc; +-char **argv; +- +-int main() { +- +-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; +- +-; return 0; } +-EOF +-if { (eval echo configure:1378: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* +- am_cv_prog_cc_stdc="$ac_arg"; break +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 ++_ACEOF ++for ac_lib in '' cposix; do ++ if test -z "$ac_lib"; then ++ ac_res="none required" ++ else ++ ac_res=-l$ac_lib ++ LIBS="-l$ac_lib $ac_func_search_save_LIBS" ++ fi ++ if ac_fn_c_try_link "$LINENO"; then : ++ ac_cv_search_strerror=$ac_res + fi +-rm -f conftest* +-done +-CC="$ac_save_CC" +- ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext ++ if ${ac_cv_search_strerror+:} false; then : ++ break + fi ++done ++if ${ac_cv_search_strerror+:} false; then : + +-if test -z "$am_cv_prog_cc_stdc"; then +- echo "$ac_t""none needed" 1>&6 + else +- echo "$ac_t""$am_cv_prog_cc_stdc" 1>&6 ++ ac_cv_search_strerror=no + fi +-case "x$am_cv_prog_cc_stdc" in +- x|xno) ;; +- *) CC="$CC $am_cv_prog_cc_stdc" ;; +-esac +- +- ++rm conftest.$ac_ext ++LIBS=$ac_func_search_save_LIBS ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_strerror" >&5 ++$as_echo "$ac_cv_search_strerror" >&6; } ++ac_res=$ac_cv_search_strerror ++if test "$ac_res" != no; then : ++ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + +-echo $ac_n "checking for function prototypes""... $ac_c" 1>&6 +-echo "configure:1404: checking for function prototypes" >&5 +-if test "$am_cv_prog_cc_stdc" != no; then +- echo "$ac_t""yes" 1>&6 +- cat >> confdefs.h <<\EOF +-#define PROTOTYPES 1 +-EOF ++fi + +- U= ANSI2KNR= ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 ++$as_echo_n "checking for ANSI C header files... " >&6; } ++if ${ac_cv_header_stdc+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- echo "$ac_t""no" 1>&6 +- U=_ ANSI2KNR=./ansi2knr +- # Ensure some checks needed by ansi2knr itself. +- echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 +-echo "configure:1417: checking for ANSI C header files" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 1422 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <stdlib.h> + #include <stdarg.h> + #include <string.h> + #include <float.h> +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:1430: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out` +-if test -z "$ac_err"; then +- rm -rf conftest* ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes + else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* + ac_cv_header_stdc=no + fi +-rm -f conftest* ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +-cat > conftest.$ac_ext <<EOF +-#line 1447 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <string.h> +-EOF ++ ++_ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "memchr" >/dev/null 2>&1; then +- : ++ $EGREP "memchr" >/dev/null 2>&1; then : ++ + else +- rm -rf conftest* + ac_cv_header_stdc=no + fi + rm -f conftest* +@@ -1460,16 +4485,15 @@ fi + + if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +-cat > conftest.$ac_ext <<EOF +-#line 1465 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <stdlib.h> +-EOF ++ ++_ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "free" >/dev/null 2>&1; then +- : ++ $EGREP "free" >/dev/null 2>&1; then : ++ + else +- rm -rf conftest* + ac_cv_header_stdc=no + fi + rm -f conftest* +@@ -1478,206 +4502,263 @@ fi + + if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +-if test "$cross_compiling" = yes; then ++ if test "$cross_compiling" = yes; then : + : + else +- cat > conftest.$ac_ext <<EOF +-#line 1486 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <ctype.h> +-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) ++#include <stdlib.h> ++#if ((' ' & 0x0FF) == 0x020) ++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') ++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) ++#else ++# define ISLOWER(c) \ ++ (('a' <= (c) && (c) <= 'i') \ ++ || ('j' <= (c) && (c) <= 'r') \ ++ || ('s' <= (c) && (c) <= 'z')) ++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) ++#endif ++ + #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +-int main () { int i; for (i = 0; i < 256; i++) +-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); +-exit (0); } +- +-EOF +-if { (eval echo configure:1497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +-then +- : ++int ++main () ++{ ++ int i; ++ for (i = 0; i < 256; i++) ++ if (XOR (islower (i), ISLOWER (i)) ++ || toupper (i) != TOUPPER (i)) ++ return 2; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_run "$LINENO"; then : ++ + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -fr conftest* + ac_cv_header_stdc=no + fi +-rm -fr conftest* ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext + fi + + fi + fi +- +-echo "$ac_t""$ac_cv_header_stdc" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 ++$as_echo "$ac_cv_header_stdc" >&6; } + if test $ac_cv_header_stdc = yes; then +- cat >> confdefs.h <<\EOF +-#define STDC_HEADERS 1 +-EOF + +-fi ++$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +- for ac_hdr in string.h +-do +-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +-echo "configure:1524: checking for $ac_hdr" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 1529 "configure" +-#include "confdefs.h" +-#include <$ac_hdr> +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:1534: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out` +-if test -z "$ac_err"; then +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=yes" +-else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=no" +-fi +-rm -f conftest* + fi +-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_hdr 1 +-EOF +- +-else +- echo "$ac_t""no" 1>&6 ++ ++# On IRIX 5.3, sys/types and inttypes.h are conflicting. ++for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ ++ inttypes.h stdint.h unistd.h ++do : ++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default ++" ++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ + fi ++ + done + ++ ++ ++ ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default" ++if test "x$ac_cv_header_minix_config_h" = xyes; then : ++ MINIX=yes ++else ++ MINIX= ++fi ++ ++ ++ if test "$MINIX" = yes; then ++ ++$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h ++ ++ ++$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h ++ ++ ++$as_echo "#define _MINIX 1" >>confdefs.h ++ ++ fi ++ ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5 ++$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; } ++if ${ac_cv_safe_to_define___extensions__+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++# define __EXTENSIONS__ 1 ++ $ac_includes_default ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_safe_to_define___extensions__=yes ++else ++ ac_cv_safe_to_define___extensions__=no ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5 ++$as_echo "$ac_cv_safe_to_define___extensions__" >&6; } ++ test $ac_cv_safe_to_define___extensions__ = yes && ++ $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h + +-echo $ac_n "checking for working const""... $ac_c" 1>&6 +-echo "configure:1563: checking for working const" >&5 +-if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 1568 "configure" +-#include "confdefs.h" +- +-int main() { +- +-/* Ultrix mips cc rejects this. */ +-typedef int charset[2]; const charset x; +-/* SunOS 4.1.1 cc rejects this. */ +-char const *const *ccp; +-char **p; +-/* NEC SVR4.0.2 mips cc rejects this. */ +-struct point {int x, y;}; +-static struct point const zero = {0,0}; +-/* AIX XL C 1.02.0.0 rejects this. +- It does not let you subtract one const X* pointer from another in an arm +- of an if-expression whose if-part is not a constant expression */ +-const char *g = "string"; +-ccp = &g + (g ? g-g : 0); +-/* HPUX 7.0 cc rejects these. */ +-++ccp; +-p = (char**) ccp; +-ccp = (char const *const *) p; +-{ /* SCO 3.2v4 cc rejects this. */ +- char *t; +- char const *s = 0 ? (char *) 0 : (char const *) 0; +- +- *t++ = 0; +-} +-{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ +- int x[] = {25, 17}; +- const int *foo = &x[0]; +- ++foo; +-} +-{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ +- typedef const int *iptr; +- iptr p = 0; +- ++p; +-} +-{ /* AIX XL C 1.02.0.0 rejects this saying +- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ +- struct s { int j; const int *ap[3]; }; +- struct s *b; b->j = 5; +-} +-{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ +- const int foo = 10; +-} +- +-; return 0; } +-EOF +-if { (eval echo configure:1617: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* ++ $as_echo "#define _ALL_SOURCE 1" >>confdefs.h ++ ++ $as_echo "#define _GNU_SOURCE 1" >>confdefs.h ++ ++ $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h ++ ++ $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 ++$as_echo_n "checking for an ANSI C-conforming const... " >&6; } ++if ${ac_cv_c_const+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++#ifndef __cplusplus ++ /* Ultrix mips cc rejects this sort of thing. */ ++ typedef int charset[2]; ++ const charset cs = { 0, 0 }; ++ /* SunOS 4.1.1 cc rejects this. */ ++ char const *const *pcpcc; ++ char **ppc; ++ /* NEC SVR4.0.2 mips cc rejects this. */ ++ struct point {int x, y;}; ++ static struct point const zero = {0,0}; ++ /* AIX XL C 1.02.0.0 rejects this. ++ It does not let you subtract one const X* pointer from another in ++ an arm of an if-expression whose if-part is not a constant ++ expression */ ++ const char *g = "string"; ++ pcpcc = &g + (g ? g-g : 0); ++ /* HPUX 7.0 cc rejects these. */ ++ ++pcpcc; ++ ppc = (char**) pcpcc; ++ pcpcc = (char const *const *) ppc; ++ { /* SCO 3.2v4 cc rejects this sort of thing. */ ++ char tx; ++ char *t = &tx; ++ char const *s = 0 ? (char *) 0 : (char const *) 0; ++ ++ *t++ = 0; ++ if (s) return 0; ++ } ++ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ ++ int x[] = {25, 17}; ++ const int *foo = &x[0]; ++ ++foo; ++ } ++ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ ++ typedef const int *iptr; ++ iptr p = 0; ++ ++p; ++ } ++ { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying ++ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ ++ struct s { int j; const int *ap[3]; } bx; ++ struct s *b = &bx; b->j = 5; ++ } ++ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ ++ const int foo = 10; ++ if (!foo) return 0; ++ } ++ return !cs[0] && !zero.x; ++#endif ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_const=yes + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* + ac_cv_c_const=no + fi +-rm -f conftest* ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +- +-echo "$ac_t""$ac_cv_c_const" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 ++$as_echo "$ac_cv_c_const" >&6; } + if test $ac_cv_c_const = no; then +- cat >> confdefs.h <<\EOF +-#define const +-EOF ++ ++$as_echo "#define const /**/" >>confdefs.h + + fi + +-echo $ac_n "checking for inline""... $ac_c" 1>&6 +-echo "configure:1638: checking for inline" >&5 +-if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 ++$as_echo_n "checking for inline... " >&6; } ++if ${ac_cv_c_inline+:} false; then : ++ $as_echo_n "(cached) " >&6 + else + ac_cv_c_inline=no + for ac_kw in inline __inline__ __inline; do +- cat > conftest.$ac_ext <<EOF +-#line 1645 "configure" +-#include "confdefs.h" +- +-int main() { +-} $ac_kw foo() { +-; return 0; } +-EOF +-if { (eval echo configure:1652: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* +- ac_cv_c_inline=$ac_kw; break +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#ifndef __cplusplus ++typedef int foo_t; ++static $ac_kw foo_t static_foo () {return 0; } ++$ac_kw foo_t foo () {return 0; } ++#endif ++ ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_c_inline=$ac_kw + fi +-rm -f conftest* ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ test "$ac_cv_c_inline" != no && break + done + + fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5 ++$as_echo "$ac_cv_c_inline" >&6; } + +-echo "$ac_t""$ac_cv_c_inline" 1>&6 +-case "$ac_cv_c_inline" in ++case $ac_cv_c_inline in + inline | yes) ;; +- no) cat >> confdefs.h <<\EOF +-#define inline +-EOF +- ;; +- *) cat >> confdefs.h <<EOF +-#define inline $ac_cv_c_inline +-EOF +- ;; ++ *) ++ case $ac_cv_c_inline in ++ no) ac_val=;; ++ *) ac_val=$ac_cv_c_inline;; ++ esac ++ cat >>confdefs.h <<_ACEOF ++#ifndef __cplusplus ++#define inline $ac_val ++#endif ++_ACEOF ++ ;; + esac + + + if test `hostname` = tirka.ohse.de -a "$cross_compiling" = no ; then + test $prefix = NONE && prefix=/usr +- if test -z "$CFLAGS" ; then +- case "$CC" in ++ if test -z "$CFLAGS" ; then ++ case "$CC" in + *gcc*) + CFLAGS="-Wall -Wstrict-prototypes -Wmissing-prototypes" + # -Wnested_externs entfernt wegen dcgettext() +@@ -1691,195 +4772,185 @@ if test `hostname` = tirka.ohse.de -a "$ + fi + case "$CFLAGS" in + *-Wstrict-prototypes*) +- cat >> confdefs.h <<\EOF +-#define STRICT_PROTOTYPES 1 +-EOF ++ $as_echo "#define STRICT_PROTOTYPES 1" >>confdefs.h + + ;; + esac + +-echo $ac_n "checking for syslog in -lsocket""... $ac_c" 1>&6 +-echo "configure:1703: checking for syslog in -lsocket" >&5 +-ac_lib_var=`echo socket'_'syslog | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for syslog in -lsocket" >&5 ++$as_echo_n "checking for syslog in -lsocket... " >&6; } ++if ${ac_cv_lib_socket_syslog+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- ac_save_LIBS="$LIBS" ++ ac_check_lib_save_LIBS=$LIBS + LIBS="-lsocket $LIBS" +-cat > conftest.$ac_ext <<EOF +-#line 1711 "configure" +-#include "confdefs.h" +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char syslog(); +- +-int main() { +-syslog() +-; return 0; } +-EOF +-if { (eval echo configure:1722: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=no" +-fi +-rm -f conftest* +-LIBS="$ac_save_LIBS" ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +-fi +-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \ +- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_lib 1 +-EOF ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char syslog (); ++int ++main () ++{ ++return syslog (); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ ac_cv_lib_socket_syslog=yes ++else ++ ac_cv_lib_socket_syslog=no ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_syslog" >&5 ++$as_echo "$ac_cv_lib_socket_syslog" >&6; } ++if test "x$ac_cv_lib_socket_syslog" = xyes; then : ++ cat >>confdefs.h <<_ACEOF ++#define HAVE_LIBSOCKET 1 ++_ACEOF + + LIBS="-lsocket $LIBS" + +-else +- echo "$ac_t""no" 1>&6 + fi + +-echo $ac_n "checking for syslog in -lbe""... $ac_c" 1>&6 +-echo "configure:1750: checking for syslog in -lbe" >&5 +-ac_lib_var=`echo be'_'syslog | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for syslog in -lbe" >&5 ++$as_echo_n "checking for syslog in -lbe... " >&6; } ++if ${ac_cv_lib_be_syslog+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- ac_save_LIBS="$LIBS" ++ ac_check_lib_save_LIBS=$LIBS + LIBS="-lbe $LIBS" +-cat > conftest.$ac_ext <<EOF +-#line 1758 "configure" +-#include "confdefs.h" +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char syslog(); +- +-int main() { +-syslog() +-; return 0; } +-EOF +-if { (eval echo configure:1769: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=no" +-fi +-rm -f conftest* +-LIBS="$ac_save_LIBS" ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +-fi +-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_lib=HAVE_LIB`echo be | sed -e 's/[^a-zA-Z0-9_]/_/g' \ +- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_lib 1 +-EOF ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char syslog (); ++int ++main () ++{ ++return syslog (); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ ac_cv_lib_be_syslog=yes ++else ++ ac_cv_lib_be_syslog=no ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_be_syslog" >&5 ++$as_echo "$ac_cv_lib_be_syslog" >&6; } ++if test "x$ac_cv_lib_be_syslog" = xyes; then : ++ cat >>confdefs.h <<_ACEOF ++#define HAVE_LIBBE 1 ++_ACEOF + + LIBS="-lbe $LIBS" + +-else +- echo "$ac_t""no" 1>&6 + fi + +-echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 +-echo "configure:1797: checking for gethostbyname in -lnsl" >&5 +-ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lnsl" >&5 ++$as_echo_n "checking for gethostbyname in -lnsl... " >&6; } ++if ${ac_cv_lib_nsl_gethostbyname+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- ac_save_LIBS="$LIBS" ++ ac_check_lib_save_LIBS=$LIBS + LIBS="-lnsl $LIBS" +-cat > conftest.$ac_ext <<EOF +-#line 1805 "configure" +-#include "confdefs.h" +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char gethostbyname(); +- +-int main() { +-gethostbyname() +-; return 0; } +-EOF +-if { (eval echo configure:1816: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=no" +-fi +-rm -f conftest* +-LIBS="$ac_save_LIBS" ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +-fi +-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_lib=HAVE_LIB`echo nsl | sed -e 's/[^a-zA-Z0-9_]/_/g' \ +- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_lib 1 +-EOF ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ ac_cv_lib_nsl_gethostbyname=yes ++else ++ ac_cv_lib_nsl_gethostbyname=no ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostbyname" >&5 ++$as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; } ++if test "x$ac_cv_lib_nsl_gethostbyname" = xyes; then : ++ cat >>confdefs.h <<_ACEOF ++#define HAVE_LIBNSL 1 ++_ACEOF + + LIBS="-lnsl $LIBS" + +-else +- echo "$ac_t""no" 1>&6 + fi + + +-echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 +-echo "configure:1845: checking for ANSI C header files" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 ++$as_echo_n "checking for ANSI C header files... " >&6; } ++if ${ac_cv_header_stdc+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- cat > conftest.$ac_ext <<EOF +-#line 1850 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <stdlib.h> + #include <stdarg.h> + #include <string.h> + #include <float.h> +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:1858: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out` +-if test -z "$ac_err"; then +- rm -rf conftest* ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes + else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* + ac_cv_header_stdc=no + fi +-rm -f conftest* ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +-cat > conftest.$ac_ext <<EOF +-#line 1875 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <string.h> +-EOF ++ ++_ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "memchr" >/dev/null 2>&1; then +- : ++ $EGREP "memchr" >/dev/null 2>&1; then : ++ + else +- rm -rf conftest* + ac_cv_header_stdc=no + fi + rm -f conftest* +@@ -1888,16 +4959,15 @@ fi + + if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +-cat > conftest.$ac_ext <<EOF +-#line 1893 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <stdlib.h> +-EOF ++ ++_ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "free" >/dev/null 2>&1; then +- : ++ $EGREP "free" >/dev/null 2>&1; then : ++ + else +- rm -rf conftest* + ac_cv_header_stdc=no + fi + rm -f conftest* +@@ -1906,354 +4976,163 @@ fi + + if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +-if test "$cross_compiling" = yes; then ++ if test "$cross_compiling" = yes; then : + : + else +- cat > conftest.$ac_ext <<EOF +-#line 1914 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <ctype.h> +-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) ++#include <stdlib.h> ++#if ((' ' & 0x0FF) == 0x020) ++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') ++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) ++#else ++# define ISLOWER(c) \ ++ (('a' <= (c) && (c) <= 'i') \ ++ || ('j' <= (c) && (c) <= 'r') \ ++ || ('s' <= (c) && (c) <= 'z')) ++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) ++#endif ++ + #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +-int main () { int i; for (i = 0; i < 256; i++) +-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); +-exit (0); } +- +-EOF +-if { (eval echo configure:1925: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +-then +- : ++int ++main () ++{ ++ int i; ++ for (i = 0; i < 256; i++) ++ if (XOR (islower (i), ISLOWER (i)) ++ || toupper (i) != TOUPPER (i)) ++ return 2; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_run "$LINENO"; then : ++ + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -fr conftest* + ac_cv_header_stdc=no + fi +-rm -fr conftest* ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext + fi + + fi + fi +- +-echo "$ac_t""$ac_cv_header_stdc" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 ++$as_echo "$ac_cv_header_stdc" >&6; } + if test $ac_cv_header_stdc = yes; then +- cat >> confdefs.h <<\EOF +-#define STDC_HEADERS 1 +-EOF + +-fi ++$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +-for ac_hdr in fcntl.h limits.h sys/ioctl.h sys/time.h unistd.h sys/times.h +-do +-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +-echo "configure:1952: checking for $ac_hdr" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 1957 "configure" +-#include "confdefs.h" +-#include <$ac_hdr> +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:1962: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out` +-if test -z "$ac_err"; then +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=yes" +-else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=no" +-fi +-rm -f conftest* + fi +-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_hdr 1 +-EOF +- +-else +- echo "$ac_t""no" 1>&6 ++ ++for ac_header in fcntl.h limits.h sys/ioctl.h sys/time.h unistd.h sys/times.h ++do : ++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" ++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ + fi ++ + done + + +-for ac_hdr in termios.h sys/termios.h termio.h sys/termio.h sgtty.h +-do +-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +-echo "configure:1993: checking for $ac_hdr" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 1998 "configure" +-#include "confdefs.h" +-#include <$ac_hdr> +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:2003: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out` +-if test -z "$ac_err"; then +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=yes" +-else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=no" +-fi +-rm -f conftest* +-fi +-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_hdr 1 +-EOF +- +-else +- echo "$ac_t""no" 1>&6 ++for ac_header in termios.h sys/termios.h termio.h sys/termio.h sgtty.h ++do : ++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" ++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ + fi ++ + done + +-for ac_hdr in termios.h sys/termios.h termio.h sys/termio.h sgtty.h +-do +-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +-echo "configure:2033: checking for $ac_hdr" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 2038 "configure" +-#include "confdefs.h" +-#include <$ac_hdr> +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:2043: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out` +-if test -z "$ac_err"; then +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=yes" +-else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=no" +-fi +-rm -f conftest* +-fi +-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_hdr 1 +-EOF +- +-else +- echo "$ac_t""no" 1>&6 ++for ac_header in termios.h sys/termios.h termio.h sys/termio.h sgtty.h ++do : ++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" ++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ + fi ++ + done + +-for ac_hdr in sys/mman.h utime.h syslog.h sys/syslog.h sys/param.h +-do +-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +-echo "configure:2073: checking for $ac_hdr" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 2078 "configure" +-#include "confdefs.h" +-#include <$ac_hdr> +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:2083: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out` +-if test -z "$ac_err"; then +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=yes" +-else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=no" +-fi +-rm -f conftest* +-fi +-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_hdr 1 +-EOF +- +-else +- echo "$ac_t""no" 1>&6 ++for ac_header in sys/mman.h utime.h syslog.h sys/syslog.h sys/param.h ++do : ++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" ++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ + fi ++ + done + +-for ac_hdr in sys/select.h strings.h arpa/inet.h +-do +-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +-echo "configure:2113: checking for $ac_hdr" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 2118 "configure" +-#include "confdefs.h" +-#include <$ac_hdr> +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:2123: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out` +-if test -z "$ac_err"; then +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=yes" +-else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=no" +-fi +-rm -f conftest* +-fi +-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_hdr 1 +-EOF +- +-else +- echo "$ac_t""no" 1>&6 ++for ac_header in sys/select.h strings.h arpa/inet.h ++do : ++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" ++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ + fi ++ + done + + +-echo $ac_n "checking for size_t""... $ac_c" 1>&6 +-echo "configure:2151: checking for size_t" >&5 +-if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 2156 "configure" +-#include "confdefs.h" +-#include <sys/types.h> +-#if STDC_HEADERS +-#include <stdlib.h> +-#include <stddef.h> +-#endif +-EOF +-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then +- rm -rf conftest* +- ac_cv_type_size_t=yes ++ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" ++if test "x$ac_cv_type_size_t" = xyes; then : ++ + else +- rm -rf conftest* +- ac_cv_type_size_t=no +-fi +-rm -f conftest* + +-fi +-echo "$ac_t""$ac_cv_type_size_t" 1>&6 +-if test $ac_cv_type_size_t = no; then +- cat >> confdefs.h <<\EOF +-#define size_t unsigned +-EOF ++cat >>confdefs.h <<_ACEOF ++#define size_t unsigned int ++_ACEOF + + fi + +-echo $ac_n "checking for mode_t""... $ac_c" 1>&6 +-echo "configure:2184: checking for mode_t" >&5 +-if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 2189 "configure" +-#include "confdefs.h" +-#include <sys/types.h> +-#if STDC_HEADERS +-#include <stdlib.h> +-#include <stddef.h> +-#endif +-EOF +-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "mode_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then +- rm -rf conftest* +- ac_cv_type_mode_t=yes ++ac_fn_c_check_type "$LINENO" "mode_t" "ac_cv_type_mode_t" "$ac_includes_default" ++if test "x$ac_cv_type_mode_t" = xyes; then : ++ + else +- rm -rf conftest* +- ac_cv_type_mode_t=no +-fi +-rm -f conftest* + +-fi +-echo "$ac_t""$ac_cv_type_mode_t" 1>&6 +-if test $ac_cv_type_mode_t = no; then +- cat >> confdefs.h <<\EOF ++cat >>confdefs.h <<_ACEOF + #define mode_t int +-EOF ++_ACEOF + + fi + +-echo $ac_n "checking for off_t""... $ac_c" 1>&6 +-echo "configure:2217: checking for off_t" >&5 +-if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 2222 "configure" +-#include "confdefs.h" +-#include <sys/types.h> +-#if STDC_HEADERS +-#include <stdlib.h> +-#include <stddef.h> +-#endif +-EOF +-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then +- rm -rf conftest* +- ac_cv_type_off_t=yes ++ac_fn_c_check_type "$LINENO" "off_t" "ac_cv_type_off_t" "$ac_includes_default" ++if test "x$ac_cv_type_off_t" = xyes; then : ++ + else +- rm -rf conftest* +- ac_cv_type_off_t=no +-fi +-rm -f conftest* + +-fi +-echo "$ac_t""$ac_cv_type_off_t" 1>&6 +-if test $ac_cv_type_off_t = no; then +- cat >> confdefs.h <<\EOF +-#define off_t long +-EOF ++cat >>confdefs.h <<_ACEOF ++#define off_t long int ++_ACEOF + + fi + + +-echo $ac_n "checking for speed_t""... $ac_c" 1>&6 +-echo "configure:2251: checking for speed_t" >&5 +-if eval "test \"`echo '$''{'ac_cv_type_speed_t'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for speed_t" >&5 ++$as_echo_n "checking for speed_t... " >&6; } ++if ${ac_cv_type_speed_t+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- cat > conftest.$ac_ext <<EOF +-#line 2256 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <sys/types.h> + #if STDC_HEADERS + #include <stdlib.h> +@@ -2281,394 +5160,261 @@ else + #endif + #endif + +-EOF ++_ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "speed_t" >/dev/null 2>&1; then +- rm -rf conftest* ++ $EGREP "speed_t" >/dev/null 2>&1; then : + ac_cv_type_speed_t=yes + else +- rm -rf conftest* + ac_cv_type_speed_t=no + fi + rm -f conftest* + + fi +-echo "$ac_t""$ac_cv_type_speed_t" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_speed_t" >&5 ++$as_echo "$ac_cv_type_speed_t" >&6; } + if test $ac_cv_type_speed_t = no; then +- cat >> confdefs.h <<\EOF +-#define speed_t long +-EOF ++ $as_echo "#define speed_t long" >>confdefs.h + + fi + +-echo $ac_n "checking for st_rdev in struct stat""... $ac_c" 1>&6 +-echo "configure:2306: checking for st_rdev in struct stat" >&5 +-if eval "test \"`echo '$''{'ac_cv_struct_st_rdev'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 2311 "configure" +-#include "confdefs.h" +-#include <sys/types.h> +-#include <sys/stat.h> +-int main() { +-struct stat s; s.st_rdev; +-; return 0; } +-EOF +-if { (eval echo configure:2319: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* +- ac_cv_struct_st_rdev=yes +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- ac_cv_struct_st_rdev=no +-fi +-rm -f conftest* +-fi ++ac_fn_c_check_member "$LINENO" "struct stat" "st_rdev" "ac_cv_member_struct_stat_st_rdev" "$ac_includes_default" ++if test "x$ac_cv_member_struct_stat_st_rdev" = xyes; then : ++ ++cat >>confdefs.h <<_ACEOF ++#define HAVE_STRUCT_STAT_ST_RDEV 1 ++_ACEOF ++ + +-echo "$ac_t""$ac_cv_struct_st_rdev" 1>&6 +-if test $ac_cv_struct_st_rdev = yes; then +- cat >> confdefs.h <<\EOF +-#define HAVE_ST_RDEV 1 +-EOF ++$as_echo "#define HAVE_ST_RDEV 1" >>confdefs.h + + fi + +-echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6 +-echo "configure:2340: checking whether time.h and sys/time.h may both be included" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 2345 "configure" +-#include "confdefs.h" ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5 ++$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; } ++if ${ac_cv_header_time+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <sys/types.h> + #include <sys/time.h> + #include <time.h> +-int main() { +-struct tm *tp; +-; return 0; } +-EOF +-if { (eval echo configure:2354: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* ++ ++int ++main () ++{ ++if ((struct tm *) 0) ++return 0; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_time=yes + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* + ac_cv_header_time=no + fi +-rm -f conftest* ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +- +-echo "$ac_t""$ac_cv_header_time" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5 ++$as_echo "$ac_cv_header_time" >&6; } + if test $ac_cv_header_time = yes; then +- cat >> confdefs.h <<\EOF +-#define TIME_WITH_SYS_TIME 1 +-EOF ++ ++$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h + + fi + +-echo $ac_n "checking whether sys/time.h and sys/select.h may both be included""... $ac_c" 1>&6 +-echo "configure:2375: checking whether sys/time.h and sys/select.h may both be included" >&5 +-if eval "test \"`echo '$''{'lrzsz_cv_header_sys_select'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether sys/time.h and sys/select.h may both be included" >&5 ++$as_echo_n "checking whether sys/time.h and sys/select.h may both be included... " >&6; } ++if ${lrzsz_cv_header_sys_select+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- cat > conftest.$ac_ext <<EOF +-#line 2380 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <sys/types.h> + #include <sys/time.h> + #include <sys/select.h> +-int main() { ++int ++main () ++{ + struct tm *tp; +-; return 0; } +-EOF +-if { (eval echo configure:2389: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : + lrzsz_cv_header_sys_select=yes + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* + lrzsz_cv_header_sys_select=no + fi +-rm -f conftest* ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +- +-echo "$ac_t""$lrzsz_cv_header_sys_select" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lrzsz_cv_header_sys_select" >&5 ++$as_echo "$lrzsz_cv_header_sys_select" >&6; } + if test $lrzsz_cv_header_sys_select = no; then +- cat >> confdefs.h <<\EOF +-#define SYS_TIME_WITHOUT_SYS_SELECT 1 +-EOF ++ $as_echo "#define SYS_TIME_WITHOUT_SYS_SELECT 1" >>confdefs.h + + fi + +-echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6 +-echo "configure:2410: checking whether struct tm is in sys/time.h or time.h" >&5 +-if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5 ++$as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; } ++if ${ac_cv_struct_tm+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- cat > conftest.$ac_ext <<EOF +-#line 2415 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <sys/types.h> + #include <time.h> +-int main() { +-struct tm *tp; tp->tm_sec; +-; return 0; } +-EOF +-if { (eval echo configure:2423: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* ++ ++int ++main () ++{ ++struct tm tm; ++ int *p = &tm.tm_sec; ++ return !p; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_struct_tm=time.h + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* + ac_cv_struct_tm=sys/time.h + fi +-rm -f conftest* ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +- +-echo "$ac_t""$ac_cv_struct_tm" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5 ++$as_echo "$ac_cv_struct_tm" >&6; } + if test $ac_cv_struct_tm = sys/time.h; then +- cat >> confdefs.h <<\EOF +-#define TM_IN_SYS_TIME 1 +-EOF ++ ++$as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h + + fi + + +-echo $ac_n "checking for errno declaration""... $ac_c" 1>&6 +-echo "configure:2445: checking for errno declaration" >&5 +-if eval "test \"`echo '$''{'lrzsz_cv_decl_errno'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for errno declaration" >&5 ++$as_echo_n "checking for errno declaration... " >&6; } ++if ${lrzsz_cv_decl_errno+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- cat > conftest.$ac_ext <<EOF +-#line 2450 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <errno.h> +-int main() { ++int ++main () ++{ + int i = errno; errno = 1; +-; return 0; } +-EOF +-if { (eval echo configure:2457: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : + lrzsz_cv_decl_errno=yes + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* + lrzsz_cv_decl_errno=no + fi +-rm -f conftest* ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + +-echo "$ac_t""$lrzsz_cv_decl_errno" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lrzsz_cv_decl_errno" >&5 ++$as_echo "$lrzsz_cv_decl_errno" >&6; } + if test $lrzsz_cv_decl_errno = yes; then +- cat >> confdefs.h <<\EOF +-#define HAVE_ERRNO_DECLARATION 1 +-EOF ++ $as_echo "#define HAVE_ERRNO_DECLARATION 1" >>confdefs.h + + fi + + + if test $cross_compiling = no ; then +- echo $ac_n "checking whether setvbuf arguments are reversed""... $ac_c" 1>&6 +-echo "configure:2480: checking whether setvbuf arguments are reversed" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_setvbuf_reversed'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- if test "$cross_compiling" = yes; then +- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } +-else +- cat > conftest.$ac_ext <<EOF +-#line 2488 "configure" +-#include "confdefs.h" +-#include <stdio.h> +-/* If setvbuf has the reversed format, exit 0. */ +-main () { +- /* This call has the arguments reversed. +- A reversed system may check and see that the address of main +- is not _IOLBF, _IONBF, or _IOFBF, and return nonzero. */ +- if (setvbuf(stdout, _IOLBF, (char *) main, BUFSIZ) != 0) +- exit(1); +- putc('\r', stdout); +- exit(0); /* Non-reversed systems segv here. */ +-} +-EOF +-if { (eval echo configure:2502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +-then +- ac_cv_func_setvbuf_reversed=yes +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -fr conftest* ++ if ${ac_cv_func_setvbuf_reversed+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else + ac_cv_func_setvbuf_reversed=no + fi +-rm -fr conftest* +-fi + +-rm -f core core.* *.core +-fi +- +-echo "$ac_t""$ac_cv_func_setvbuf_reversed" 1>&6 +-if test $ac_cv_func_setvbuf_reversed = yes; then +- cat >> confdefs.h <<\EOF +-#define SETVBUF_REVERSED 1 +-EOF +- +-fi + + fi +-echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 +-echo "configure:2527: checking return type of signal handlers" >&5 +-if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5 ++$as_echo_n "checking return type of signal handlers... " >&6; } ++if ${ac_cv_type_signal+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- cat > conftest.$ac_ext <<EOF +-#line 2532 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <sys/types.h> + #include <signal.h> +-#ifdef signal +-#undef signal +-#endif +-#ifdef __cplusplus +-extern "C" void (*signal (int, void (*)(int)))(int); +-#else +-void (*signal ()) (); +-#endif + +-int main() { +-int i; +-; return 0; } +-EOF +-if { (eval echo configure:2549: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +- rm -rf conftest* +- ac_cv_type_signal=void +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* ++int ++main () ++{ ++return *(signal (0, 0)) (0) == 1; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_type_signal=int ++else ++ ac_cv_type_signal=void + fi +-rm -f conftest* ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5 ++$as_echo "$ac_cv_type_signal" >&6; } + +-echo "$ac_t""$ac_cv_type_signal" 1>&6 +-cat >> confdefs.h <<EOF ++cat >>confdefs.h <<_ACEOF + #define RETSIGTYPE $ac_cv_type_signal +-EOF ++_ACEOF + + +-for ac_hdr in unistd.h +-do +-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +-echo "configure:2571: checking for $ac_hdr" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 2576 "configure" +-#include "confdefs.h" +-#include <$ac_hdr> +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:2581: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out` +-if test -z "$ac_err"; then +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=yes" +-else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=no" +-fi +-rm -f conftest* +-fi +-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_hdr 1 +-EOF +- +-else +- echo "$ac_t""no" 1>&6 ++ ++ ++ ++ for ac_header in $ac_header_list ++do : ++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default ++" ++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ + fi ++ + done + +-for ac_func in getpagesize +-do +-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +-echo "configure:2610: checking for $ac_func" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 2615 "configure" +-#include "confdefs.h" +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func(); below. */ +-#include <assert.h> +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char $ac_func(); + +-int main() { + +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +-choke me +-#else +-$ac_func(); +-#endif + +-; return 0; } +-EOF +-if { (eval echo configure:2638: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=no" +-fi +-rm -f conftest* +-fi + +-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_func 1 +-EOF +- +-else +- echo "$ac_t""no" 1>&6 ++ ++ ++ ++for ac_func in getpagesize ++do : ++ ac_fn_c_check_func "$LINENO" "getpagesize" "ac_cv_func_getpagesize" ++if test "x$ac_cv_func_getpagesize" = xyes; then : ++ cat >>confdefs.h <<_ACEOF ++#define HAVE_GETPAGESIZE 1 ++_ACEOF ++ + fi + done + +-echo $ac_n "checking for working mmap""... $ac_c" 1>&6 +-echo "configure:2663: checking for working mmap" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working mmap" >&5 ++$as_echo_n "checking for working mmap... " >&6; } ++if ${ac_cv_func_mmap_fixed_mapped+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- if test "$cross_compiling" = yes; then ++ if test "$cross_compiling" = yes; then : + ac_cv_func_mmap_fixed_mapped=no + else +- cat > conftest.$ac_ext <<EOF +-#line 2671 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$ac_includes_default ++/* malloc might have been renamed as rpl_malloc. */ ++#undef malloc + + /* Thanks to Mike Haertel and Jim Avera for this test. + Here is a matrix of mmap possibilities: +@@ -2682,30 +5428,25 @@ else + back from the file, nor mmap's back from the file at a different + address. (There have been systems where private was not correctly + implemented like the infamous i386 svr4.0, and systems where the +- VM page cache was not coherent with the filesystem buffer cache ++ VM page cache was not coherent with the file system buffer cache + like early versions of FreeBSD and possibly contemporary NetBSD.) + For shared mappings, we should conversely verify that changes get +- propogated back to all the places they're supposed to be. ++ propagated back to all the places they're supposed to be. + + Grep wants private fixed already mapped. + The main things grep needs to know about mmap are: + * does it exist and is it safe to write into the mmap'd area + * how to use it (BSD variants) */ +-#include <sys/types.h> ++ + #include <fcntl.h> + #include <sys/mman.h> + ++#if !defined STDC_HEADERS && !defined HAVE_STDLIB_H ++char *malloc (); ++#endif ++ + /* This mess was copied from the GNU getpagesize.h. */ + #ifndef HAVE_GETPAGESIZE +-# ifdef HAVE_UNISTD_H +-# include <unistd.h> +-# endif +- +-/* Assume that all systems that can run configure have sys/param.h. */ +-# ifndef HAVE_SYS_PARAM_H +-# define HAVE_SYS_PARAM_H 1 +-# endif +- + # ifdef _SC_PAGESIZE + # define getpagesize() sysconf(_SC_PAGESIZE) + # else /* no _SC_PAGESIZE */ +@@ -2736,736 +5477,504 @@ else + + #endif /* no HAVE_GETPAGESIZE */ + +-#ifdef __cplusplus +-extern "C" { void *malloc(unsigned); } +-#else +-char *malloc(); +-#endif +- + int +-main() ++main () + { +- char *data, *data2, *data3; +- int i, pagesize; +- int fd; +- +- pagesize = getpagesize(); +- +- /* +- * First, make a file with some known garbage in it. +- */ +- data = malloc(pagesize); +- if (!data) +- exit(1); +- for (i = 0; i < pagesize; ++i) +- *(data + i) = rand(); +- umask(0); +- fd = creat("conftestmmap", 0600); +- if (fd < 0) +- exit(1); +- if (write(fd, data, pagesize) != pagesize) +- exit(1); +- close(fd); +- +- /* +- * Next, try to mmap the file at a fixed address which +- * already has something else allocated at it. If we can, +- * also make sure that we see the same garbage. +- */ +- fd = open("conftestmmap", O_RDWR); +- if (fd < 0) +- exit(1); +- data2 = malloc(2 * pagesize); +- if (!data2) +- exit(1); +- data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1); +- if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE, +- MAP_PRIVATE | MAP_FIXED, fd, 0L)) +- exit(1); +- for (i = 0; i < pagesize; ++i) +- if (*(data + i) != *(data2 + i)) +- exit(1); +- +- /* +- * Finally, make sure that changes to the mapped area +- * do not percolate back to the file as seen by read(). +- * (This is a bug on some variants of i386 svr4.0.) +- */ +- for (i = 0; i < pagesize; ++i) +- *(data2 + i) = *(data2 + i) + 1; +- data3 = malloc(pagesize); +- if (!data3) +- exit(1); +- if (read(fd, data3, pagesize) != pagesize) +- exit(1); +- for (i = 0; i < pagesize; ++i) +- if (*(data + i) != *(data3 + i)) +- exit(1); +- close(fd); +- unlink("conftestmmap"); +- exit(0); +-} +- +-EOF +-if { (eval echo configure:2811: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +-then ++ char *data, *data2, *data3; ++ const char *cdata2; ++ int i, pagesize; ++ int fd, fd2; ++ ++ pagesize = getpagesize (); ++ ++ /* First, make a file with some known garbage in it. */ ++ data = (char *) malloc (pagesize); ++ if (!data) ++ return 1; ++ for (i = 0; i < pagesize; ++i) ++ *(data + i) = rand (); ++ umask (0); ++ fd = creat ("conftest.mmap", 0600); ++ if (fd < 0) ++ return 2; ++ if (write (fd, data, pagesize) != pagesize) ++ return 3; ++ close (fd); ++ ++ /* Next, check that the tail of a page is zero-filled. File must have ++ non-zero length, otherwise we risk SIGBUS for entire page. */ ++ fd2 = open ("conftest.txt", O_RDWR | O_CREAT | O_TRUNC, 0600); ++ if (fd2 < 0) ++ return 4; ++ cdata2 = ""; ++ if (write (fd2, cdata2, 1) != 1) ++ return 5; ++ data2 = (char *) mmap (0, pagesize, PROT_READ | PROT_WRITE, MAP_SHARED, fd2, 0L); ++ if (data2 == MAP_FAILED) ++ return 6; ++ for (i = 0; i < pagesize; ++i) ++ if (*(data2 + i)) ++ return 7; ++ close (fd2); ++ if (munmap (data2, pagesize)) ++ return 8; ++ ++ /* Next, try to mmap the file at a fixed address which already has ++ something else allocated at it. If we can, also make sure that ++ we see the same garbage. */ ++ fd = open ("conftest.mmap", O_RDWR); ++ if (fd < 0) ++ return 9; ++ if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE, ++ MAP_PRIVATE | MAP_FIXED, fd, 0L)) ++ return 10; ++ for (i = 0; i < pagesize; ++i) ++ if (*(data + i) != *(data2 + i)) ++ return 11; ++ ++ /* Finally, make sure that changes to the mapped area do not ++ percolate back to the file as seen by read(). (This is a bug on ++ some variants of i386 svr4.0.) */ ++ for (i = 0; i < pagesize; ++i) ++ *(data2 + i) = *(data2 + i) + 1; ++ data3 = (char *) malloc (pagesize); ++ if (!data3) ++ return 12; ++ if (read (fd, data3, pagesize) != pagesize) ++ return 13; ++ for (i = 0; i < pagesize; ++i) ++ if (*(data + i) != *(data3 + i)) ++ return 14; ++ close (fd); ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_mmap_fixed_mapped=yes + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -fr conftest* + ac_cv_func_mmap_fixed_mapped=no + fi +-rm -fr conftest* ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext + fi + + fi +- +-echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_mmap_fixed_mapped" >&5 ++$as_echo "$ac_cv_func_mmap_fixed_mapped" >&6; } + if test $ac_cv_func_mmap_fixed_mapped = yes; then +- cat >> confdefs.h <<\EOF +-#define HAVE_MMAP 1 +-EOF ++ ++$as_echo "#define HAVE_MMAP 1" >>confdefs.h + + fi ++rm -f conftest.mmap conftest.txt + + # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works + # for constant arguments. Useless! +-echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 +-echo "configure:2836: checking for working alloca.h" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 2841 "configure" +-#include "confdefs.h" ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5 ++$as_echo_n "checking for working alloca.h... " >&6; } ++if ${ac_cv_working_alloca_h+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <alloca.h> +-int main() { +-char *p = alloca(2 * sizeof(int)); +-; return 0; } +-EOF +-if { (eval echo configure:2848: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- ac_cv_header_alloca_h=yes +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- ac_cv_header_alloca_h=no ++int ++main () ++{ ++char *p = (char *) alloca (2 * sizeof (int)); ++ if (p) return 0; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ ac_cv_working_alloca_h=yes ++else ++ ac_cv_working_alloca_h=no + fi +-rm -f conftest* ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_working_alloca_h" >&5 ++$as_echo "$ac_cv_working_alloca_h" >&6; } ++if test $ac_cv_working_alloca_h = yes; then + +-echo "$ac_t""$ac_cv_header_alloca_h" 1>&6 +-if test $ac_cv_header_alloca_h = yes; then +- cat >> confdefs.h <<\EOF +-#define HAVE_ALLOCA_H 1 +-EOF ++$as_echo "#define HAVE_ALLOCA_H 1" >>confdefs.h + + fi + +-echo $ac_n "checking for alloca""... $ac_c" 1>&6 +-echo "configure:2869: checking for alloca" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 2874 "configure" +-#include "confdefs.h" +- ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5 ++$as_echo_n "checking for alloca... " >&6; } ++if ${ac_cv_func_alloca_works+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #ifdef __GNUC__ + # define alloca __builtin_alloca + #else +-# if HAVE_ALLOCA_H +-# include <alloca.h> ++# ifdef _MSC_VER ++# include <malloc.h> ++# define alloca _alloca + # else +-# ifdef _AIX +- #pragma alloca ++# ifdef HAVE_ALLOCA_H ++# include <alloca.h> + # else +-# ifndef alloca /* predefined by HP cc +Olibcalls */ +-char *alloca (); ++# ifdef _AIX ++ #pragma alloca ++# else ++# ifndef alloca /* predefined by HP cc +Olibcalls */ ++void *alloca (size_t); ++# endif + # endif + # endif + # endif + #endif + +-int main() { +-char *p = (char *) alloca(1); +-; return 0; } +-EOF +-if { (eval echo configure:2897: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* ++int ++main () ++{ ++char *p = (char *) alloca (1); ++ if (p) return 0; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : + ac_cv_func_alloca_works=yes + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* + ac_cv_func_alloca_works=no + fi +-rm -f conftest* ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_alloca_works" >&5 ++$as_echo "$ac_cv_func_alloca_works" >&6; } + +-echo "$ac_t""$ac_cv_func_alloca_works" 1>&6 + if test $ac_cv_func_alloca_works = yes; then +- cat >> confdefs.h <<\EOF +-#define HAVE_ALLOCA 1 +-EOF + +-fi ++$as_echo "#define HAVE_ALLOCA 1" >>confdefs.h + +-if test $ac_cv_func_alloca_works = no; then ++else + # The SVR3 libPW and SVR4 libucb both contain incompatible functions +- # that cause trouble. Some versions do not even contain alloca or +- # contain a buggy version. If you still want to use their alloca, +- # use ar to extract alloca.o from them instead of compiling alloca.c. +- ALLOCA=alloca.o +- cat >> confdefs.h <<\EOF +-#define C_ALLOCA 1 +-EOF +- +- +-echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 +-echo "configure:2929: checking whether alloca needs Cray hooks" >&5 +-if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 2934 "configure" +-#include "confdefs.h" +-#if defined(CRAY) && ! defined(CRAY2) ++# that cause trouble. Some versions do not even contain alloca or ++# contain a buggy version. If you still want to use their alloca, ++# use ar to extract alloca.o from them instead of compiling alloca.c. ++ ++ALLOCA=\${LIBOBJDIR}alloca.$ac_objext ++ ++$as_echo "#define C_ALLOCA 1" >>confdefs.h ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5 ++$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; } ++if ${ac_cv_os_cray+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#if defined CRAY && ! defined CRAY2 + webecray + #else + wenotbecray + #endif + +-EOF ++_ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "webecray" >/dev/null 2>&1; then +- rm -rf conftest* ++ $EGREP "webecray" >/dev/null 2>&1; then : + ac_cv_os_cray=yes + else +- rm -rf conftest* + ac_cv_os_cray=no + fi + rm -f conftest* + + fi +- +-echo "$ac_t""$ac_cv_os_cray" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_os_cray" >&5 ++$as_echo "$ac_cv_os_cray" >&6; } + if test $ac_cv_os_cray = yes; then +-for ac_func in _getb67 GETB67 getb67; do +- echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +-echo "configure:2959: checking for $ac_func" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 2964 "configure" +-#include "confdefs.h" +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func(); below. */ +-#include <assert.h> +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char $ac_func(); +- +-int main() { ++ for ac_func in _getb67 GETB67 getb67; do ++ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ++ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" ++if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +-choke me +-#else +-$ac_func(); +-#endif +- +-; return 0; } +-EOF +-if { (eval echo configure:2987: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=no" +-fi +-rm -f conftest* +-fi +- +-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- cat >> confdefs.h <<EOF ++cat >>confdefs.h <<_ACEOF + #define CRAY_STACKSEG_END $ac_func +-EOF ++_ACEOF + +- break +-else +- echo "$ac_t""no" 1>&6 ++ break + fi + +-done ++ done + fi + +-echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 +-echo "configure:3014: checking stack direction for C alloca" >&5 +-if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5 ++$as_echo_n "checking stack direction for C alloca... " >&6; } ++if ${ac_cv_c_stack_direction+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- if test "$cross_compiling" = yes; then ++ if test "$cross_compiling" = yes; then : + ac_cv_c_stack_direction=0 + else +- cat > conftest.$ac_ext <<EOF +-#line 3022 "configure" +-#include "confdefs.h" +-find_stack_direction () +-{ +- static char *addr = 0; +- auto char dummy; +- if (addr == 0) +- { +- addr = &dummy; +- return find_stack_direction (); +- } +- else +- return (&dummy > addr) ? 1 : -1; ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$ac_includes_default ++int ++find_stack_direction (int *addr, int depth) ++{ ++ int dir, dummy = 0; ++ if (! addr) ++ addr = &dummy; ++ *addr = addr < &dummy ? 1 : addr == &dummy ? 0 : -1; ++ dir = depth ? find_stack_direction (addr, depth - 1) : 0; ++ return dir + dummy; + } +-main () ++ ++int ++main (int argc, char **argv) + { +- exit (find_stack_direction() < 0); ++ return find_stack_direction (0, argc + !argv + 20) < 0; + } +-EOF +-if { (eval echo configure:3041: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +-then ++_ACEOF ++if ac_fn_c_try_run "$LINENO"; then : + ac_cv_c_stack_direction=1 + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -fr conftest* + ac_cv_c_stack_direction=-1 + fi +-rm -fr conftest* ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext + fi + + fi +- +-echo "$ac_t""$ac_cv_c_stack_direction" 1>&6 +-cat >> confdefs.h <<EOF ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stack_direction" >&5 ++$as_echo "$ac_cv_c_stack_direction" >&6; } ++cat >>confdefs.h <<_ACEOF + #define STACK_DIRECTION $ac_cv_c_stack_direction +-EOF ++_ACEOF ++ + + fi + +-cat > conftest.$ac_ext <<EOF +-#line 3063 "configure" +-#include "confdefs.h" ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <utime.h> +-EOF ++ ++_ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "struct.*utimbuf" >/dev/null 2>&1; then +- rm -rf conftest* +- cat >> confdefs.h <<\EOF +-#define HAVE_STRUCT_UTIMBUF 1 +-EOF ++ $EGREP "struct.*utimbuf" >/dev/null 2>&1; then : ++ $as_echo "#define HAVE_STRUCT_UTIMBUF 1" >>confdefs.h + + fi + rm -f conftest* + + + for ac_func in gettimeofday settimeofday +-do +-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +-echo "configure:3081: checking for $ac_func" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 3086 "configure" +-#include "confdefs.h" +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func(); below. */ +-#include <assert.h> +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char $ac_func(); +- +-int main() { +- +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +-choke me +-#else +-$ac_func(); +-#endif ++do : ++ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ++ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" ++if eval test \"x\$"$as_ac_var"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF + +-; return 0; } +-EOF +-if { (eval echo configure:3109: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=no" +-fi +-rm -f conftest* +-fi +- +-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_func 1 +-EOF +- +-else +- echo "$ac_t""no" 1>&6 + fi + done + + for ac_func in strchr memcpy select vprintf +-do +-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +-echo "configure:3136: checking for $ac_func" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 3141 "configure" +-#include "confdefs.h" +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func(); below. */ +-#include <assert.h> +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char $ac_func(); ++do : ++ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ++ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" ++if eval test \"x\$"$as_ac_var"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF + +-int main() { ++fi ++done + +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +-choke me +-#else +-$ac_func(); +-#endif ++for ac_func in times rdchk utime syslog siginterrupt ++do : ++ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ++ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" ++if eval test \"x\$"$as_ac_var"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF + +-; return 0; } +-EOF +-if { (eval echo configure:3164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=no" +-fi +-rm -f conftest* + fi ++done ++ ++ac_fn_c_check_func "$LINENO" "mkdir" "ac_cv_func_mkdir" ++if test "x$ac_cv_func_mkdir" = xyes; then : ++ $as_echo "#define HAVE_MKDIR 1" >>confdefs.h + +-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_func 1 +-EOF +- + else +- echo "$ac_t""no" 1>&6 +-fi +-done ++ case " $LIBOBJS " in ++ *" mkdir.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS mkdir.$ac_objext" ++ ;; ++esac + +-for ac_func in times rdchk utime syslog siginterrupt +-do +-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +-echo "configure:3191: checking for $ac_func" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 3196 "configure" +-#include "confdefs.h" +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func(); below. */ +-#include <assert.h> +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char $ac_func(); ++fi + +-int main() { ++ac_fn_c_check_func "$LINENO" "mktime" "ac_cv_func_mktime" ++if test "x$ac_cv_func_mktime" = xyes; then : ++ $as_echo "#define HAVE_MKTIME 1" >>confdefs.h + +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +-choke me +-#else +-$ac_func(); +-#endif ++else ++ case " $LIBOBJS " in ++ *" mktime.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS mktime.$ac_objext" ++ ;; ++esac + +-; return 0; } +-EOF +-if { (eval echo configure:3219: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=no" +-fi +-rm -f conftest* + fi + +-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_func 1 +-EOF +- ++ac_fn_c_check_func "$LINENO" "strerror" "ac_cv_func_strerror" ++if test "x$ac_cv_func_strerror" = xyes; then : ++ $as_echo "#define HAVE_STRERROR 1" >>confdefs.h ++ + else +- echo "$ac_t""no" 1>&6 +-fi +-done ++ case " $LIBOBJS " in ++ *" strerror.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS strerror.$ac_objext" ++ ;; ++esac + +-for ac_func in mkdir mktime strerror strstr strdup strtoul strtol strpbrk +-do +-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +-echo "configure:3246: checking for $ac_func" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 3251 "configure" +-#include "confdefs.h" +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func(); below. */ +-#include <assert.h> +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char $ac_func(); ++fi + +-int main() { ++ac_fn_c_check_func "$LINENO" "strstr" "ac_cv_func_strstr" ++if test "x$ac_cv_func_strstr" = xyes; then : ++ $as_echo "#define HAVE_STRSTR 1" >>confdefs.h + +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +-choke me +-#else +-$ac_func(); +-#endif ++else ++ case " $LIBOBJS " in ++ *" strstr.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS strstr.$ac_objext" ++ ;; ++esac + +-; return 0; } +-EOF +-if { (eval echo configure:3274: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=no" +-fi +-rm -f conftest* + fi + +-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_func 1 +-EOF +- ++ac_fn_c_check_func "$LINENO" "strdup" "ac_cv_func_strdup" ++if test "x$ac_cv_func_strdup" = xyes; then : ++ $as_echo "#define HAVE_STRDUP 1" >>confdefs.h ++ + else +- echo "$ac_t""no" 1>&6 +-LIBOBJS="$LIBOBJS ${ac_func}.o" ++ case " $LIBOBJS " in ++ *" strdup.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS strdup.$ac_objext" ++ ;; ++esac ++ + fi +-done + ++ac_fn_c_check_func "$LINENO" "strtoul" "ac_cv_func_strtoul" ++if test "x$ac_cv_func_strtoul" = xyes; then : ++ $as_echo "#define HAVE_STRTOUL 1" >>confdefs.h + +-for ac_func in stpcpy strftime vasprintf +-do +-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +-echo "configure:3303: checking for $ac_func" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 3308 "configure" +-#include "confdefs.h" +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func(); below. */ +-#include <assert.h> +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char $ac_func(); ++else ++ case " $LIBOBJS " in ++ *" strtoul.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS strtoul.$ac_objext" ++ ;; ++esac + +-int main() { ++fi + +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +-choke me +-#else +-$ac_func(); +-#endif ++ac_fn_c_check_func "$LINENO" "strtol" "ac_cv_func_strtol" ++if test "x$ac_cv_func_strtol" = xyes; then : ++ $as_echo "#define HAVE_STRTOL 1" >>confdefs.h ++ ++else ++ case " $LIBOBJS " in ++ *" strtol.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS strtol.$ac_objext" ++ ;; ++esac + +-; return 0; } +-EOF +-if { (eval echo configure:3331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=no" +-fi +-rm -f conftest* + fi + +-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_func 1 +-EOF +- ++ac_fn_c_check_func "$LINENO" "strpbrk" "ac_cv_func_strpbrk" ++if test "x$ac_cv_func_strpbrk" = xyes; then : ++ $as_echo "#define HAVE_STRPBRK 1" >>confdefs.h ++ + else +- echo "$ac_t""no" 1>&6 +-LIBOBJS="$LIBOBJS ${ac_func}.o" ++ case " $LIBOBJS " in ++ *" strpbrk.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS strpbrk.$ac_objext" ++ ;; ++esac ++ + fi +-done + + ++ac_fn_c_check_func "$LINENO" "stpcpy" "ac_cv_func_stpcpy" ++if test "x$ac_cv_func_stpcpy" = xyes; then : ++ $as_echo "#define HAVE_STPCPY 1" >>confdefs.h + +-echo $ac_n "checking for getopt_long""... $ac_c" 1>&6 +-echo "configure:3359: checking for getopt_long" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_getopt_long'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 + else +- cat > conftest.$ac_ext <<EOF +-#line 3364 "configure" +-#include "confdefs.h" +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char getopt_long(); below. */ +-#include <assert.h> +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char getopt_long(); ++ case " $LIBOBJS " in ++ *" stpcpy.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS stpcpy.$ac_objext" ++ ;; ++esac + +-int main() { ++fi + +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_getopt_long) || defined (__stub___getopt_long) +-choke me +-#else +-getopt_long(); +-#endif ++ac_fn_c_check_func "$LINENO" "strftime" "ac_cv_func_strftime" ++if test "x$ac_cv_func_strftime" = xyes; then : ++ $as_echo "#define HAVE_STRFTIME 1" >>confdefs.h ++ ++else ++ case " $LIBOBJS " in ++ *" strftime.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS strftime.$ac_objext" ++ ;; ++esac + +-; return 0; } +-EOF +-if { (eval echo configure:3387: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_func_getopt_long=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_getopt_long=no" +-fi +-rm -f conftest* + fi + +-if eval "test \"`echo '$ac_cv_func_'getopt_long`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- : ++ac_fn_c_check_func "$LINENO" "vasprintf" "ac_cv_func_vasprintf" ++if test "x$ac_cv_func_vasprintf" = xyes; then : ++ $as_echo "#define HAVE_VASPRINTF 1" >>confdefs.h ++ + else +- echo "$ac_t""no" 1>&6 +-LIBOBJS="$LIBOBJS getopt1.o getopt.o" ++ case " $LIBOBJS " in ++ *" vasprintf.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS vasprintf.$ac_objext" ++ ;; ++esac ++ + fi + + + +-cat >> confdefs.h <<\EOF +-#define HAVE_STRERROR 1 +-EOF ++ac_fn_c_check_func "$LINENO" "getopt_long" "ac_cv_func_getopt_long" ++if test "x$ac_cv_func_getopt_long" = xyes; then : + ++else ++ LIBOBJS="$LIBOBJS getopt1.o getopt.o" ++fi + + + +-echo $ac_n "checking for ftime""... $ac_c" 1>&6 +-echo "configure:3417: checking for ftime" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_ftime'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 3422 "configure" +-#include "confdefs.h" +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char ftime(); below. */ +-#include <assert.h> +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char ftime(); ++$as_echo "#define HAVE_STRERROR 1" >>confdefs.h + +-int main() { + +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_ftime) || defined (__stub___ftime) +-choke me +-#else +-ftime(); +-#endif + +-; return 0; } +-EOF +-if { (eval echo configure:3445: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_func_ftime=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_ftime=no" +-fi +-rm -f conftest* +-fi + +-if eval "test \"`echo '$ac_cv_func_'ftime`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- echo $ac_n "checking that ftime works correctly""... $ac_c" 1>&6 +-echo "configure:3460: checking that ftime works correctly" >&5 +-if eval "test \"`echo '$''{'lrzsz_cv_sys_ftime_ok'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ac_fn_c_check_func "$LINENO" "ftime" "ac_cv_func_ftime" ++if test "x$ac_cv_func_ftime" = xyes; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking that ftime works correctly" >&5 ++$as_echo_n "checking that ftime works correctly... " >&6; } ++if ${lrzsz_cv_sys_ftime_ok+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- if test "$cross_compiling" = yes; then ++ if test "$cross_compiling" = yes; then : + lrzsz_cv_sys_ftime_ok=runtime + else +- cat > conftest.$ac_ext <<EOF +-#line 3468 "configure" +-#include "confdefs.h" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + + #include <sys/types.h> + #include <sys/timeb.h> +@@ -3492,88 +6001,82 @@ main () + exit (0); + } + +-EOF +-if { (eval echo configure:3497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +-then ++_ACEOF ++if ac_fn_c_try_run "$LINENO"; then : + lrzsz_cv_sys_ftime_ok=yes + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -fr conftest* + lrzsz_cv_sys_ftime_ok=no + fi +-rm -fr conftest* ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext + fi + + fi + + case $lrzsz_cv_sys_ftime_ok in +-yes) cat >> confdefs.h <<\EOF +-#define HAVE_FTIME 1 +-EOF +- echo "$ac_t""yes" 1>&6 ;; +-no) echo "$ac_t""no" 1>&6 +- echo "configure: warning: ftime seems to be buggy" 1>&2 ;; +-runtime) cat >> confdefs.h <<\EOF +-#define HAVE_FTIME 1 +-EOF ++yes) $as_echo "#define HAVE_FTIME 1" >>confdefs.h ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ;; ++no) { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ftime seems to be buggy" >&5 ++$as_echo "$as_me: WARNING: ftime seems to be buggy" >&2;} ;; ++runtime) $as_echo "#define HAVE_FTIME 1" >>confdefs.h + +- echo "$ac_t""will check at run time" 1>&6 ;; ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: will check at run time" >&5 ++$as_echo "will check at run time" >&6; } ;; + esac + +-else +- echo "$ac_t""no" 1>&6 + fi + + +-echo $ac_n "checking for timezone variable""... $ac_c" 1>&6 +-echo "configure:3531: checking for timezone variable" >&5 +-if eval "test \"`echo '$''{'libquark_cv_var_timezone'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for timezone variable" >&5 ++$as_echo_n "checking for timezone variable... " >&6; } ++if ${libquark_cv_var_timezone+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- +-cat > conftest.$ac_ext <<EOF +-#line 3537 "configure" +-#include "confdefs.h" ++ ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + #include <time.h> +-int main() { ++int ++main () ++{ + return(int)(timezone/2); +-; return 0; } +-EOF +-if { (eval echo configure:3544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : + libquark_cv_var_timezone=yes + else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* + libquark_cv_var_timezone=no + fi +-rm -f conftest* ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + + fi + + if test $libquark_cv_var_timezone = yes ; then +- echo "$ac_t""yes" 1>&6 +- cat >> confdefs.h <<\EOF +-#define HAVE_TIMEZONE_VAR 1 +-EOF ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++ $as_echo "#define HAVE_TIMEZONE_VAR 1" >>confdefs.h + + else +- echo "$ac_t""no" 1>&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + if test "x$lookup_facility" = x ; then + : + else +- echo $ac_n "checking for $lookup_facility""... $ac_c" 1>&6 +-echo "configure:3570: checking for $lookup_facility" >&5 +- if eval "test \"`echo '$''{'lrzsz_cv_lookup_facility'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- +- cat > conftest.$ac_ext <<EOF +-#line 3576 "configure" +-#include "confdefs.h" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $lookup_facility" >&5 ++$as_echo_n "checking for $lookup_facility... " >&6; } ++ if ${lrzsz_cv_lookup_facility+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + + #ifdef HAVE_SYSLOG_H + #include <syslog.h> +@@ -3583,1562 +6086,4174 @@ else + #ifdef $lookup_facility + ihave$lookup_facility + #endif +- +-EOF ++ ++_ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- egrep "ihave$lookup_facility" >/dev/null 2>&1; then +- rm -rf conftest* ++ $EGREP "ihave$lookup_facility" >/dev/null 2>&1; then : + lrzsz_cv_lookup_facility=yes + else +- rm -rf conftest* + lrzsz_cv_lookup_facility=no + fi + rm -f conftest* + +- ++ + fi + + if test $lrzsz_cv_lookup_facility = yes ; then +- echo "$ac_t""yes" 1>&6 +- cat >> confdefs.h <<EOF ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++ cat >>confdefs.h <<_ACEOF + #define ENABLE_SYSLOG $lookup_facility +-EOF ++_ACEOF + + else +- cat >> confdefs.h <<\EOF +-#define ENABLE_SYSLOG LOG_USER +-EOF ++ $as_echo "#define ENABLE_SYSLOG LOG_USER" >>confdefs.h + +- echo "$ac_t""no" 1>&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + fi + + + + +- +- +- +- for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \ +-unistd.h values.h sys/param.h +-do +-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +-echo "configure:3628: checking for $ac_hdr" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 3633 "configure" +-#include "confdefs.h" +-#include <$ac_hdr> +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:3638: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out` +-if test -z "$ac_err"; then +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=yes" +-else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=no" +-fi +-rm -f conftest* +-fi +-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_hdr 1 +-EOF +- +-else +- echo "$ac_t""no" 1>&6 +-fi +-done +- +- for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \ +-__argz_count __argz_stringify __argz_next ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 ++$as_echo_n "checking for a sed that does not truncate output... " >&6; } ++if ${ac_cv_path_SED+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ ++ for ac_i in 1 2 3 4 5 6 7; do ++ ac_script="$ac_script$as_nl$ac_script" ++ done ++ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed ++ { ac_script=; unset ac_script;} ++ if test -z "$SED"; then ++ ac_path_SED_found=false ++ # Loop through the user's path and test for each of PROGNAME-LIST ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH + do +-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +-echo "configure:3668: checking for $ac_func" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 3673 "configure" +-#include "confdefs.h" +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func(); below. */ +-#include <assert.h> +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char $ac_func(); +- +-int main() { +- +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +-choke me +-#else +-$ac_func(); +-#endif +- +-; return 0; } +-EOF +-if { (eval echo configure:3696: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=no" +-fi +-rm -f conftest* +-fi ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" ++ as_fn_executable_p "$ac_path_SED" || continue ++# Check for GNU ac_path_SED and select it if it is found. ++ # Check for GNU $ac_path_SED ++case `"$ac_path_SED" --version 2>&1` in ++*GNU*) ++ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; ++*) ++ ac_count=0 ++ $as_echo_n 0123456789 >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ $as_echo '' >> "conftest.nl" ++ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ as_fn_arith $ac_count + 1 && ac_count=$as_val ++ if test $ac_count -gt ${ac_path_SED_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_SED="$ac_path_SED" ++ ac_path_SED_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac + +-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_func 1 +-EOF +- ++ $ac_path_SED_found && break 3 ++ done ++ done ++ done ++IFS=$as_save_IFS ++ if test -z "$ac_cv_path_SED"; then ++ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 ++ fi + else +- echo "$ac_t""no" 1>&6 ++ ac_cv_path_SED=$SED + fi +-done +- + +- if test "${ac_cv_func_stpcpy+set}" != "set"; then +- for ac_func in stpcpy +-do +-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +-echo "configure:3725: checking for $ac_func" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 3730 "configure" +-#include "confdefs.h" +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func(); below. */ +-#include <assert.h> +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char $ac_func(); +- +-int main() { +- +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +-choke me +-#else +-$ac_func(); +-#endif +- +-; return 0; } +-EOF +-if { (eval echo configure:3753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=no" +-fi +-rm -f conftest* + fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 ++$as_echo "$ac_cv_path_SED" >&6; } ++ SED="$ac_cv_path_SED" ++ rm -f conftest.sed ++ + +-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_func 1 +-EOF +- ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 ++$as_echo_n "checking whether NLS is requested... " >&6; } ++ # Check whether --enable-nls was given. ++if test "${enable_nls+set}" = set; then : ++ enableval=$enable_nls; USE_NLS=$enableval + else +- echo "$ac_t""no" 1>&6 ++ USE_NLS=yes + fi +-done +- +- fi +- if test "${ac_cv_func_stpcpy}" = "yes"; then +- cat >> confdefs.h <<\EOF +-#define HAVE_STPCPY 1 +-EOF + +- fi ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 ++$as_echo "$USE_NLS" >&6; } + +- if test $ac_cv_header_locale_h = yes; then +- echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 +-echo "configure:3787: checking for LC_MESSAGES" >&5 +-if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 3792 "configure" +-#include "confdefs.h" +-#include <locale.h> +-int main() { +-return LC_MESSAGES +-; return 0; } +-EOF +-if { (eval echo configure:3799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- am_cv_val_LC_MESSAGES=yes +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- am_cv_val_LC_MESSAGES=no +-fi +-rm -f conftest* +-fi + +-echo "$ac_t""$am_cv_val_LC_MESSAGES" 1>&6 +- if test $am_cv_val_LC_MESSAGES = yes; then +- cat >> confdefs.h <<\EOF +-#define HAVE_LC_MESSAGES 1 +-EOF + +- fi +- fi +- echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 +-echo "configure:3820: checking whether NLS is requested" >&5 +- # Check whether --enable-nls or --disable-nls was given. +-if test "${enable_nls+set}" = set; then +- enableval="$enable_nls" +- USE_NLS=$enableval +-else +- USE_NLS=yes +-fi + +- echo "$ac_t""$USE_NLS" 1>&6 +- ++ GETTEXT_MACRO_VERSION=0.20 + +- USE_INCLUDED_LIBINTL=no + +- if test "$USE_NLS" = "yes"; then +- cat >> confdefs.h <<\EOF +-#define ENABLE_NLS 1 +-EOF +- +- echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 +-echo "configure:3840: checking whether included gettext is requested" >&5 +- # Check whether --with-included-gettext or --without-included-gettext was given. +-if test "${with_included_gettext+set}" = set; then +- withval="$with_included_gettext" +- nls_cv_force_use_gnu_gettext=$withval +-else +- nls_cv_force_use_gnu_gettext=no +-fi +- +- echo "$ac_t""$nls_cv_force_use_gnu_gettext" 1>&6 +- +- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" +- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then +- nls_cv_header_intl= +- nls_cv_header_libgt= +- CATOBJEXT=NONE +- +- ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` +-echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 +-echo "configure:3859: checking for libintl.h" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 3864 "configure" +-#include "confdefs.h" +-#include <libintl.h> +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:3869: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out` +-if test -z "$ac_err"; then +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=yes" +-else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=no" +-fi +-rm -f conftest* +-fi +-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 +-echo "configure:3886: checking for gettext in libc" >&5 +-if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 3891 "configure" +-#include "confdefs.h" +-#include <libintl.h> +-int main() { +-return (int) gettext ("") +-; return 0; } +-EOF +-if { (eval echo configure:3898: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- gt_cv_func_gettext_libc=yes +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- gt_cv_func_gettext_libc=no +-fi +-rm -f conftest* +-fi + +-echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 + +- if test "$gt_cv_func_gettext_libc" != "yes"; then +- echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 +-echo "configure:3914: checking for bindtextdomain in -lintl" >&5 +-ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- ac_save_LIBS="$LIBS" +-LIBS="-lintl $LIBS" +-cat > conftest.$ac_ext <<EOF +-#line 3922 "configure" +-#include "confdefs.h" +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char bindtextdomain(); +- +-int main() { +-bindtextdomain() +-; return 0; } +-EOF +-if { (eval echo configure:3933: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=no" +-fi +-rm -f conftest* +-LIBS="$ac_save_LIBS" +- +-fi +-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 +-echo "configure:3949: checking for gettext in libintl" >&5 +-if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 3954 "configure" +-#include "confdefs.h" +- +-int main() { +-return (int) gettext ("") +-; return 0; } +-EOF +-if { (eval echo configure:3961: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- gt_cv_func_gettext_libintl=yes +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- gt_cv_func_gettext_libintl=no +-fi +-rm -f conftest* ++# Prepare PATH_SEPARATOR. ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which ++ # contains only /bin. Note that ksh looks also at the FPATH variable, ++ # so we have to set that as well for the test. ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ ++ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ ++ || PATH_SEPARATOR=';' ++ } + fi + +-echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6 ++# Find out how to test for executable files. Don't use a zero-byte file, ++# as systems may use methods other than mode bits to determine executability. ++cat >conf$$.file <<_ASEOF ++#! /bin/sh ++exit 0 ++_ASEOF ++chmod +x conf$$.file ++if test -x conf$$.file >/dev/null 2>&1; then ++ ac_executable_p="test -x" + else +- echo "$ac_t""no" 1>&6 ++ ac_executable_p="test -f" + fi ++rm -f conf$$.file + +- fi +- +- if test "$gt_cv_func_gettext_libc" = "yes" \ +- || test "$gt_cv_func_gettext_libintl" = "yes"; then +- cat >> confdefs.h <<\EOF +-#define HAVE_GETTEXT 1 +-EOF +- +- # Extract the first word of "msgfmt", so it can be a program name with args. ++# Extract the first word of "msgfmt", so it can be a program name with args. + set dummy msgfmt; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:3989: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_path_MSGFMT+:} false; then : ++ $as_echo_n "(cached) " >&6 + else + case "$MSGFMT" in +- /*) +- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. +- ;; ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ++ ;; + *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then +- ac_cv_path_MSGFMT="$ac_dir/$ac_word" +- break +- fi +- fi +- done +- IFS="$ac_save_ifs" +- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" +- ;; ++ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$ac_save_IFS" ++ test -z "$ac_dir" && ac_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then ++ echo "$as_me: trying $ac_dir/$ac_word..." >&5 ++ if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 && ++ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then ++ ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" ++ break 2 ++ fi ++ fi ++ done ++ done ++ IFS="$ac_save_IFS" ++ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" ++ ;; + esac + fi + MSGFMT="$ac_cv_path_MSGFMT" +-if test -n "$MSGFMT"; then +- echo "$ac_t""$MSGFMT" 1>&6 ++if test "$MSGFMT" != ":"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 ++$as_echo "$MSGFMT" >&6; } + else +- echo "$ac_t""no" 1>&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi +- if test "$MSGFMT" != "no"; then +- for ac_func in dcgettext +-do +-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +-echo "configure:4023: checking for $ac_func" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 4028 "configure" +-#include "confdefs.h" +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func(); below. */ +-#include <assert.h> +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char $ac_func(); + +-int main() { +- +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +-choke me +-#else +-$ac_func(); +-#endif +- +-; return 0; } +-EOF +-if { (eval echo configure:4051: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_$ac_func=no" +-fi +-rm -f conftest* +-fi +- +-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_func 1 +-EOF +- +-else +- echo "$ac_t""no" 1>&6 +-fi +-done +- +- # Extract the first word of "gmsgfmt", so it can be a program name with args. ++ # Extract the first word of "gmsgfmt", so it can be a program name with args. + set dummy gmsgfmt; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:4078: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_path_GMSGFMT+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- case "$GMSGFMT" in +- /*) ++ case $GMSGFMT in ++ [\\/]* | ?:[\\/]*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- ac_cv_path_GMSGFMT="$ac_dir/$ac_word" +- break +- fi ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done + done +- IFS="$ac_save_ifs" ++IFS=$as_save_IFS ++ + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; + esac + fi +-GMSGFMT="$ac_cv_path_GMSGFMT" ++GMSGFMT=$ac_cv_path_GMSGFMT + if test -n "$GMSGFMT"; then +- echo "$ac_t""$GMSGFMT" 1>&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 ++$as_echo "$GMSGFMT" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++ ++ case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in ++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; ++ *) GMSGFMT_015=$GMSGFMT ;; ++ esac ++ ++ ++ ++# Prepare PATH_SEPARATOR. ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which ++ # contains only /bin. Note that ksh looks also at the FPATH variable, ++ # so we have to set that as well for the test. ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ ++ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ ++ || PATH_SEPARATOR=';' ++ } ++fi ++ ++# Find out how to test for executable files. Don't use a zero-byte file, ++# as systems may use methods other than mode bits to determine executability. ++cat >conf$$.file <<_ASEOF ++#! /bin/sh ++exit 0 ++_ASEOF ++chmod +x conf$$.file ++if test -x conf$$.file >/dev/null 2>&1; then ++ ac_executable_p="test -x" + else +- echo "$ac_t""no" 1>&6 ++ ac_executable_p="test -f" + fi ++rm -f conf$$.file + +- # Extract the first word of "xgettext", so it can be a program name with args. ++# Extract the first word of "xgettext", so it can be a program name with args. + set dummy xgettext; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:4110: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_path_XGETTEXT+:} false; then : ++ $as_echo_n "(cached) " >&6 + else + case "$XGETTEXT" in +- /*) +- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. +- ;; ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ++ ;; + *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then +- ac_cv_path_XGETTEXT="$ac_dir/$ac_word" +- break +- fi +- fi +- done +- IFS="$ac_save_ifs" ++ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$ac_save_IFS" ++ test -z "$ac_dir" && ac_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then ++ echo "$as_me: trying $ac_dir/$ac_word..." >&5 ++ if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 && ++ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then ++ ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" ++ break 2 ++ fi ++ fi ++ done ++ done ++ IFS="$ac_save_IFS" + test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" +- ;; ++ ;; + esac + fi + XGETTEXT="$ac_cv_path_XGETTEXT" +-if test -n "$XGETTEXT"; then +- echo "$ac_t""$XGETTEXT" 1>&6 ++if test "$XGETTEXT" != ":"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 ++$as_echo "$XGETTEXT" >&6; } + else +- echo "$ac_t""no" 1>&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + +- cat > conftest.$ac_ext <<EOF +-#line 4142 "configure" +-#include "confdefs.h" ++ rm -f messages.po + +-int main() { +-extern int _nl_msg_cat_cntr; +- return _nl_msg_cat_cntr +-; return 0; } +-EOF +-if { (eval echo configure:4150: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- CATOBJEXT=.gmo +- DATADIRNAME=share +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- CATOBJEXT=.mo +- DATADIRNAME=lib ++ case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in ++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; ++ *) XGETTEXT_015=$XGETTEXT ;; ++ esac ++ ++ ++ ++# Prepare PATH_SEPARATOR. ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which ++ # contains only /bin. Note that ksh looks also at the FPATH variable, ++ # so we have to set that as well for the test. ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ ++ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ ++ || PATH_SEPARATOR=';' ++ } ++fi ++ ++# Find out how to test for executable files. Don't use a zero-byte file, ++# as systems may use methods other than mode bits to determine executability. ++cat >conf$$.file <<_ASEOF ++#! /bin/sh ++exit 0 ++_ASEOF ++chmod +x conf$$.file ++if test -x conf$$.file >/dev/null 2>&1; then ++ ac_executable_p="test -x" ++else ++ ac_executable_p="test -f" ++fi ++rm -f conf$$.file ++ ++# Extract the first word of "msgmerge", so it can be a program name with args. ++set dummy msgmerge; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_path_MSGMERGE+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ case "$MSGMERGE" in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. ++ ;; ++ *) ++ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$ac_save_IFS" ++ test -z "$ac_dir" && ac_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then ++ echo "$as_me: trying $ac_dir/$ac_word..." >&5 ++ if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then ++ ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" ++ break 2 ++ fi ++ fi ++ done ++ done ++ IFS="$ac_save_IFS" ++ test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" ++ ;; ++esac + fi +-rm -f conftest* +- INSTOBJEXT=.mo +- fi +- fi +- ++MSGMERGE="$ac_cv_path_MSGMERGE" ++if test "$MSGMERGE" != ":"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 ++$as_echo "$MSGMERGE" >&6; } + else +- echo "$ac_t""no" 1>&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + + +- if test "$CATOBJEXT" = "NONE"; then +- echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6 +-echo "configure:4173: checking whether catgets can be used" >&5 +- # Check whether --with-catgets or --without-catgets was given. +-if test "${with_catgets+set}" = set; then +- withval="$with_catgets" +- nls_cv_use_catgets=$withval +-else +- nls_cv_use_catgets=no +-fi +- +- echo "$ac_t""$nls_cv_use_catgets" 1>&6 +- +- if test "$nls_cv_use_catgets" = "yes"; then +- echo $ac_n "checking for main in -li""... $ac_c" 1>&6 +-echo "configure:4186: checking for main in -li" >&5 +-ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'` +-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- ac_save_LIBS="$LIBS" +-LIBS="-li $LIBS" +-cat > conftest.$ac_ext <<EOF +-#line 4194 "configure" +-#include "confdefs.h" +- +-int main() { +-main() +-; return 0; } +-EOF +-if { (eval echo configure:4201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_lib_$ac_lib_var=no" ++ if LC_ALL=C $MSGMERGE --help | grep ' --for-msgfmt ' >/dev/null; then ++ MSGMERGE_FOR_MSGFMT_OPTION='--for-msgfmt' ++ else ++ if LC_ALL=C $MSGMERGE --help | grep ' --no-fuzzy-matching ' >/dev/null; then ++ MSGMERGE_FOR_MSGFMT_OPTION='--no-fuzzy-matching --no-location --quiet' ++ else ++ MSGMERGE_FOR_MSGFMT_OPTION='--no-location --quiet' ++ fi ++ fi ++ ++ ++ test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= ++ ++ ++ ac_config_commands="$ac_config_commands po-directories" ++ ++ ++ ++ if test "X$prefix" = "XNONE"; then ++ acl_final_prefix="$ac_default_prefix" ++ else ++ acl_final_prefix="$prefix" ++ fi ++ if test "X$exec_prefix" = "XNONE"; then ++ acl_final_exec_prefix='${prefix}' ++ else ++ acl_final_exec_prefix="$exec_prefix" ++ fi ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" ++ prefix="$acl_save_prefix" ++ ++# Make sure we can run config.sub. ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || ++ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 ++$as_echo_n "checking build system type... " >&6; } ++if ${ac_cv_build+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_build_alias=$build_alias ++test "x$ac_build_alias" = x && ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` ++test "x$ac_build_alias" = x && ++ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || ++ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 ++$as_echo "$ac_cv_build" >&6; } ++case $ac_cv_build in ++*-*-*) ;; ++*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; ++esac ++build=$ac_cv_build ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_build ++shift ++build_cpu=$1 ++build_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++build_os=$* ++IFS=$ac_save_IFS ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 ++$as_echo_n "checking host system type... " >&6; } ++if ${ac_cv_host+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test "x$host_alias" = x; then ++ ac_cv_host=$ac_cv_build ++else ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || ++ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 + fi +-rm -f conftest* +-LIBS="$ac_save_LIBS" + + fi +-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- ac_tr_lib=HAVE_LIB`echo i | sed -e 's/[^a-zA-Z0-9_]/_/g' \ +- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` +- cat >> confdefs.h <<EOF +-#define $ac_tr_lib 1 +-EOF ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 ++$as_echo "$ac_cv_host" >&6; } ++case $ac_cv_host in ++*-*-*) ;; ++*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; ++esac ++host=$ac_cv_host ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_host ++shift ++host_cpu=$1 ++host_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++host_os=$* ++IFS=$ac_save_IFS ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac ++ ++ + +- LIBS="-li $LIBS" + ++# Check whether --with-gnu-ld was given. ++if test "${with_gnu_ld+set}" = set; then : ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes ++else ++ with_gnu_ld=no ++fi ++ ++# Prepare PATH_SEPARATOR. ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which ++ # contains only /bin. Note that ksh looks also at the FPATH variable, ++ # so we have to set that as well for the test. ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ ++ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ ++ || PATH_SEPARATOR=';' ++ } ++fi ++ ++if test -n "$LD"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld" >&5 ++$as_echo_n "checking for ld... " >&6; } ++elif test "$GCC" = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 ++$as_echo_n "checking for ld used by $CC... " >&6; } ++elif test "$with_gnu_ld" = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 ++$as_echo_n "checking for GNU ld... " >&6; } + else +- echo "$ac_t""no" 1>&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 ++$as_echo_n "checking for non-GNU ld... " >&6; } + fi +- +- echo $ac_n "checking for catgets""... $ac_c" 1>&6 +-echo "configure:4229: checking for catgets" >&5 +-if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++if test -n "$LD"; then ++ # Let the user override the test with a path. ++ : ++else ++ if ${acl_cv_path_LD+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- cat > conftest.$ac_ext <<EOF +-#line 4234 "configure" +-#include "confdefs.h" +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char catgets(); below. */ +-#include <assert.h> +-/* Override any gcc2 internal prototype to avoid an error. */ +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char catgets(); +- +-int main() { + +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_catgets) || defined (__stub___catgets) +-choke me +-#else +-catgets(); +-#endif ++ acl_cv_path_LD= # Final result of this test ++ ac_prog=ld # Program to search in $PATH ++ if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ acl_output=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ acl_output=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $acl_output in ++ # Accept absolute paths. ++ [\\/]* | ?:[\\/]*) ++ re_direlt='/[^/][^/]*/\.\./' ++ # Canonicalize the pathname of ld ++ acl_output=`echo "$acl_output" | sed 's%\\\\%/%g'` ++ while echo "$acl_output" | grep "$re_direlt" > /dev/null 2>&1; do ++ acl_output=`echo $acl_output | sed "s%$re_direlt%/%"` ++ done ++ # Got the pathname. No search in PATH is needed. ++ acl_cv_path_LD="$acl_output" ++ ac_prog= ++ ;; ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++ fi ++ if test -n "$ac_prog"; then ++ # Search for $ac_prog in $PATH. ++ acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$acl_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ acl_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$acl_cv_path_LD" -v 2>&1 </dev/null` in ++ *GNU* | *'with BFD'*) ++ test "$with_gnu_ld" != no && break ++ ;; ++ *) ++ test "$with_gnu_ld" != yes && break ++ ;; ++ esac ++ fi ++ done ++ IFS="$acl_save_ifs" ++ fi ++ case $host in ++ *-*-aix*) ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#if defined __powerpc64__ || defined _ARCH_PPC64 ++ int ok; ++ #else ++ error fail ++ #endif ++ ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ # The compiler produces 64-bit code. Add option '-b64' so that the ++ # linker groks 64-bit object files. ++ case "$acl_cv_path_LD " in ++ *" -b64 "*) ;; ++ *) acl_cv_path_LD="$acl_cv_path_LD -b64" ;; ++ esac ++ ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ;; ++ sparc64-*-netbsd*) ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#if defined __sparcv9 || defined __arch64__ ++ int ok; ++ #else ++ error fail ++ #endif ++ ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ++else ++ # The compiler produces 32-bit code. Add option '-m elf32_sparc' ++ # so that the linker groks 32-bit object files. ++ case "$acl_cv_path_LD " in ++ *" -m elf32_sparc "*) ;; ++ *) acl_cv_path_LD="$acl_cv_path_LD -m elf32_sparc" ;; ++ esac + +-; return 0; } +-EOF +-if { (eval echo configure:4257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +- rm -rf conftest* +- eval "ac_cv_func_catgets=yes" +-else +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_func_catgets=no" + fi +-rm -f conftest* ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ;; ++ esac ++ + fi + +-if eval "test \"`echo '$ac_cv_func_'catgets`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- cat >> confdefs.h <<\EOF +-#define HAVE_CATGETS 1 +-EOF +- +- INTLOBJS="\$(CATOBJS)" +- # Extract the first word of "gencat", so it can be a program name with args. +-set dummy gencat; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:4279: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- case "$GENCAT" in +- /*) +- ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a path. ++ LD="$acl_cv_path_LD" ++fi ++if test -n "$LD"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 ++$as_echo "$LD" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 ++$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } ++if ${acl_cv_prog_gnu_ld+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ # I'd rather use --version here, but apparently some GNU lds only accept -v. ++case `$LD -v 2>&1 </dev/null` in ++*GNU* | *'with BFD'*) ++ acl_cv_prog_gnu_ld=yes + ;; +- *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- ac_cv_path_GENCAT="$ac_dir/$ac_word" +- break +- fi +- done +- IFS="$ac_save_ifs" +- test -z "$ac_cv_path_GENCAT" && ac_cv_path_GENCAT="no" ++*) ++ acl_cv_prog_gnu_ld=no + ;; + esac + fi +-GENCAT="$ac_cv_path_GENCAT" +-if test -n "$GENCAT"; then +- echo "$ac_t""$GENCAT" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5 ++$as_echo "$acl_cv_prog_gnu_ld" >&6; } ++with_gnu_ld=$acl_cv_prog_gnu_ld ++ ++ ++ ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5 ++$as_echo_n "checking for shared library run path origin... " >&6; } ++if ${acl_cv_rpath+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- echo "$ac_t""no" 1>&6 ++ ++ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ++ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh ++ . ./conftest.sh ++ rm -f ./conftest.sh ++ acl_cv_rpath=done ++ + fi +- if test "$GENCAT" != "no"; then +- # Extract the first word of "gmsgfmt", so it can be a program name with args. +-set dummy gmsgfmt; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:4311: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5 ++$as_echo "$acl_cv_rpath" >&6; } ++ wl="$acl_cv_wl" ++ acl_libext="$acl_cv_libext" ++ acl_shlibext="$acl_cv_shlibext" ++ acl_libname_spec="$acl_cv_libname_spec" ++ acl_library_names_spec="$acl_cv_library_names_spec" ++ acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" ++ acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" ++ acl_hardcode_direct="$acl_cv_hardcode_direct" ++ acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" ++ # Check whether --enable-rpath was given. ++if test "${enable_rpath+set}" = set; then : ++ enableval=$enable_rpath; : + else +- case "$GMSGFMT" in +- /*) +- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. +- ;; +- *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- ac_cv_path_GMSGFMT="$ac_dir/$ac_word" +- break +- fi +- done +- IFS="$ac_save_ifs" +- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no" +- ;; +-esac ++ enable_rpath=yes + fi +-GMSGFMT="$ac_cv_path_GMSGFMT" +-if test -n "$GMSGFMT"; then +- echo "$ac_t""$GMSGFMT" 1>&6 ++ ++ ++ ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking 32-bit host C ABI" >&5 ++$as_echo_n "checking 32-bit host C ABI... " >&6; } ++if ${gl_cv_host_cpu_c_abi_32bit+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- echo "$ac_t""no" 1>&6 ++ if test -n "$gl_cv_host_cpu_c_abi"; then ++ case "$gl_cv_host_cpu_c_abi" in ++ i386 | x86_64-x32 | arm | armhf | arm64-ilp32 | hppa | ia64-ilp32 | mips | mipsn32 | powerpc | riscv*-ilp32* | s390 | sparc) ++ gl_cv_host_cpu_c_abi_32bit=yes ;; ++ *) ++ gl_cv_host_cpu_c_abi_32bit=no ;; ++ esac ++ else ++ case "$host_cpu" in ++ ++ i[4567]86 ) ++ gl_cv_host_cpu_c_abi_32bit=yes ++ ;; ++ ++ x86_64 ) ++ # On x86_64 systems, the C compiler may be generating code in one of ++ # these ABIs: ++ # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64. ++ # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64 ++ # with native Windows (mingw, MSVC). ++ # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32. ++ # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#if (defined __x86_64__ || defined __amd64__ \ ++ || defined _M_X64 || defined _M_AMD64) \ ++ && !(defined __ILP32__ || defined _ILP32) ++ int ok; ++ #else ++ error fail ++ #endif ++ ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ gl_cv_host_cpu_c_abi_32bit=no ++else ++ gl_cv_host_cpu_c_abi_32bit=yes ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ;; ++ ++ arm* | aarch64 ) ++ # Assume arm with EABI. ++ # On arm64 systems, the C compiler may be generating code in one of ++ # these ABIs: ++ # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64. ++ # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32. ++ # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#if defined __aarch64__ && !(defined __ILP32__ || defined _ILP32) ++ int ok; ++ #else ++ error fail ++ #endif ++ ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ gl_cv_host_cpu_c_abi_32bit=no ++else ++ gl_cv_host_cpu_c_abi_32bit=yes ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ;; ++ ++ hppa1.0 | hppa1.1 | hppa2.0* | hppa64 ) ++ # On hppa, the C compiler may be generating 32-bit code or 64-bit ++ # code. In the latter case, it defines _LP64 and __LP64__. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#ifdef __LP64__ ++ int ok; ++ #else ++ error fail ++ #endif ++ ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ gl_cv_host_cpu_c_abi_32bit=no ++else ++ gl_cv_host_cpu_c_abi_32bit=yes ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ;; ++ ++ ia64* ) ++ # On ia64 on HP-UX, the C compiler may be generating 64-bit code or ++ # 32-bit code. In the latter case, it defines _ILP32. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#ifdef _ILP32 ++ int ok; ++ #else ++ error fail ++ #endif ++ ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ gl_cv_host_cpu_c_abi_32bit=yes ++else ++ gl_cv_host_cpu_c_abi_32bit=no ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ;; ++ ++ mips* ) ++ # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this ++ # at 32. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64) ++ int ok; ++ #else ++ error fail ++ #endif ++ ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ gl_cv_host_cpu_c_abi_32bit=no ++else ++ gl_cv_host_cpu_c_abi_32bit=yes ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ;; ++ ++ powerpc* ) ++ # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD. ++ # No need to distinguish them here; the caller may distinguish ++ # them based on the OS. ++ # On powerpc64 systems, the C compiler may still be generating ++ # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may ++ # be generating 64-bit code. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#if defined __powerpc64__ || defined _ARCH_PPC64 ++ int ok; ++ #else ++ error fail ++ #endif ++ ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ gl_cv_host_cpu_c_abi_32bit=no ++else ++ gl_cv_host_cpu_c_abi_32bit=yes ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ;; ++ ++ rs6000 ) ++ gl_cv_host_cpu_c_abi_32bit=yes ++ ;; ++ ++ riscv32 | riscv64 ) ++ # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d. ++ # Size of 'long' and 'void *': ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#if defined __LP64__ ++ int ok; ++ #else ++ error fail ++ #endif ++ ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ gl_cv_host_cpu_c_abi_32bit=no ++else ++ gl_cv_host_cpu_c_abi_32bit=yes ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ;; ++ ++ s390* ) ++ # On s390x, the C compiler may be generating 64-bit (= s390x) code ++ # or 31-bit (= s390) code. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#if defined __LP64__ || defined __s390x__ ++ int ok; ++ #else ++ error fail ++ #endif ++ ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ gl_cv_host_cpu_c_abi_32bit=no ++else ++ gl_cv_host_cpu_c_abi_32bit=yes ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ;; ++ ++ sparc | sparc64 ) ++ # UltraSPARCs running Linux have `uname -m` = "sparc64", but the ++ # C compiler still generates 32-bit code. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#if defined __sparcv9 || defined __arch64__ ++ int ok; ++ #else ++ error fail ++ #endif ++ ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ gl_cv_host_cpu_c_abi_32bit=no ++else ++ gl_cv_host_cpu_c_abi_32bit=yes ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ;; ++ ++ *) ++ gl_cv_host_cpu_c_abi_32bit=no ++ ;; ++ esac ++ fi ++ + fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_host_cpu_c_abi_32bit" >&5 ++$as_echo "$gl_cv_host_cpu_c_abi_32bit" >&6; } + +- if test "$GMSGFMT" = "no"; then +- # Extract the first word of "msgfmt", so it can be a program name with args. +-set dummy msgfmt; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:4344: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ HOST_CPU_C_ABI_32BIT="$gl_cv_host_cpu_c_abi_32bit" ++ ++ ++ ++ ++ ++ case "$host_os" in ++ solaris*) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5 ++$as_echo_n "checking for 64-bit host... " >&6; } ++if ${gl_cv_solaris_64bit+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- case "$GMSGFMT" in +- /*) +- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. +- ;; +- *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then +- ac_cv_path_GMSGFMT="$ac_dir/$ac_word" +- break +- fi +- fi +- done +- IFS="$ac_save_ifs" +- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no" +- ;; +-esac +-fi +-GMSGFMT="$ac_cv_path_GMSGFMT" +-if test -n "$GMSGFMT"; then +- echo "$ac_t""$GMSGFMT" 1>&6 ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#ifdef _LP64 ++ int ok; ++ #else ++ error fail ++ #endif ++ ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ gl_cv_solaris_64bit=yes + else +- echo "$ac_t""no" 1>&6 ++ gl_cv_solaris_64bit=no + fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +- fi +- # Extract the first word of "xgettext", so it can be a program name with args. +-set dummy xgettext; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:4379: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- case "$XGETTEXT" in +- /*) +- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. +- ;; +- *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then +- ac_cv_path_XGETTEXT="$ac_dir/$ac_word" +- break ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5 ++$as_echo "$gl_cv_solaris_64bit" >&6; };; ++ esac ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for the common suffixes of directories in the library search path" >&5 ++$as_echo_n "checking for the common suffixes of directories in the library search path... " >&6; } ++if ${acl_cv_libdirstems+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ acl_libdirstem=lib ++ acl_libdirstem2= ++ case "$host_os" in ++ solaris*) ++ if test $gl_cv_solaris_64bit = yes; then ++ acl_libdirstem=lib/64 ++ case "$host_cpu" in ++ sparc*) acl_libdirstem2=lib/sparcv9 ;; ++ i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; ++ esac ++ fi ++ ;; ++ *) ++ if test "$HOST_CPU_C_ABI_32BIT" != yes; then ++ searchpath=`(if test -f /usr/bin/gcc \ ++ && LC_ALL=C /usr/bin/gcc -print-search-dirs >/dev/null 2>/dev/null; then \ ++ LC_ALL=C /usr/bin/gcc -print-search-dirs; \ ++ else \ ++ LC_ALL=C $CC -print-search-dirs; \ ++ fi) 2>/dev/null \ ++ | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` ++ if test -n "$searchpath"; then ++ acl_save_IFS="${IFS= }"; IFS=":" ++ for searchdir in $searchpath; do ++ if test -d "$searchdir"; then ++ case "$searchdir" in ++ */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; ++ */../ | */.. ) ++ # Better ignore directories of this form. They are misleading. ++ ;; ++ *) searchdir=`cd "$searchdir" && pwd` ++ case "$searchdir" in ++ */lib64 ) acl_libdirstem=lib64 ;; ++ esac ;; ++ esac ++ fi ++ done ++ IFS="$acl_save_IFS" ++ fi ++ fi ++ ;; ++ esac ++ test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" ++ acl_cv_libdirstems="$acl_libdirstem,$acl_libdirstem2" ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_libdirstems" >&5 ++$as_echo "$acl_cv_libdirstems" >&6; } ++ # Decompose acl_cv_libdirstems into acl_libdirstem and acl_libdirstem2. ++ acl_libdirstem=`echo "$acl_cv_libdirstems" | sed -e 's/,.*//'` ++ acl_libdirstem2=`echo "$acl_cv_libdirstems" | sed -e '/,/s/.*,//'` ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ use_additional=yes ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ ++ eval additional_includedir=\"$includedir\" ++ eval additional_libdir=\"$libdir\" ++ ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ ++# Check whether --with-libiconv-prefix was given. ++if test "${with_libiconv_prefix+set}" = set; then : ++ withval=$with_libiconv_prefix; ++ if test "X$withval" = "Xno"; then ++ use_additional=no ++ else ++ if test "X$withval" = "X"; then ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ ++ eval additional_includedir=\"$includedir\" ++ eval additional_libdir=\"$libdir\" ++ ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ else ++ additional_includedir="$withval/include" ++ additional_libdir="$withval/$acl_libdirstem" ++ if test "$acl_libdirstem2" != "$acl_libdirstem" \ ++ && test ! -d "$withval/$acl_libdirstem"; then ++ additional_libdir="$withval/$acl_libdirstem2" ++ fi + fi + fi ++ ++fi ++ ++ LIBICONV= ++ LTLIBICONV= ++ INCICONV= ++ LIBICONV_PREFIX= ++ HAVE_LIBICONV= ++ rpathdirs= ++ ltrpathdirs= ++ names_already_handled= ++ names_next_round='iconv ' ++ while test -n "$names_next_round"; do ++ names_this_round="$names_next_round" ++ names_next_round= ++ for name in $names_this_round; do ++ already_handled= ++ for n in $names_already_handled; do ++ if test "$n" = "$name"; then ++ already_handled=yes ++ break ++ fi ++ done ++ if test -z "$already_handled"; then ++ names_already_handled="$names_already_handled $name" ++ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` ++ eval value=\"\$HAVE_LIB$uppername\" ++ if test -n "$value"; then ++ if test "$value" = yes; then ++ eval value=\"\$LIB$uppername\" ++ test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" ++ eval value=\"\$LTLIB$uppername\" ++ test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" ++ else ++ : ++ fi ++ else ++ found_dir= ++ found_la= ++ found_so= ++ found_a= ++ eval libname=\"$acl_libname_spec\" # typically: libname=lib$name ++ if test -n "$acl_shlibext"; then ++ shrext=".$acl_shlibext" # typically: shrext=.so ++ else ++ shrext= ++ fi ++ if test $use_additional = yes; then ++ dir="$additional_libdir" ++ if test -n "$acl_shlibext"; then ++ if test -f "$dir/$libname$shrext"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext" ++ else ++ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ++ ver=`(cd "$dir" && \ ++ for f in "$libname$shrext".*; do echo "$f"; done \ ++ | sed -e "s,^$libname$shrext\\\\.,," \ ++ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ ++ | sed 1q ) 2>/dev/null` ++ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext.$ver" ++ fi ++ else ++ eval library_names=\"$acl_library_names_spec\" ++ for f in $library_names; do ++ if test -f "$dir/$f"; then ++ found_dir="$dir" ++ found_so="$dir/$f" ++ break ++ fi ++ done ++ fi ++ fi ++ fi ++ if test "X$found_dir" = "X"; then ++ if test -f "$dir/$libname.$acl_libext"; then ++ found_dir="$dir" ++ found_a="$dir/$libname.$acl_libext" ++ fi ++ fi ++ if test "X$found_dir" != "X"; then ++ if test -f "$dir/$libname.la"; then ++ found_la="$dir/$libname.la" ++ fi ++ fi ++ fi ++ if test "X$found_dir" = "X"; then ++ for x in $LDFLAGS $LTLIBICONV; do ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ eval x=\"$x\" ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ case "$x" in ++ -L*) ++ dir=`echo "X$x" | sed -e 's/^X-L//'` ++ if test -n "$acl_shlibext"; then ++ if test -f "$dir/$libname$shrext"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext" ++ else ++ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ++ ver=`(cd "$dir" && \ ++ for f in "$libname$shrext".*; do echo "$f"; done \ ++ | sed -e "s,^$libname$shrext\\\\.,," \ ++ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ ++ | sed 1q ) 2>/dev/null` ++ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext.$ver" ++ fi ++ else ++ eval library_names=\"$acl_library_names_spec\" ++ for f in $library_names; do ++ if test -f "$dir/$f"; then ++ found_dir="$dir" ++ found_so="$dir/$f" ++ break ++ fi ++ done ++ fi ++ fi ++ fi ++ if test "X$found_dir" = "X"; then ++ if test -f "$dir/$libname.$acl_libext"; then ++ found_dir="$dir" ++ found_a="$dir/$libname.$acl_libext" ++ fi ++ fi ++ if test "X$found_dir" != "X"; then ++ if test -f "$dir/$libname.la"; then ++ found_la="$dir/$libname.la" ++ fi ++ fi ++ ;; ++ esac ++ if test "X$found_dir" != "X"; then ++ break ++ fi ++ done ++ fi ++ if test "X$found_dir" != "X"; then ++ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" ++ if test "X$found_so" != "X"; then ++ if test "$enable_rpath" = no \ ++ || test "X$found_dir" = "X/usr/$acl_libdirstem" \ ++ || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then ++ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" ++ else ++ haveit= ++ for x in $ltrpathdirs; do ++ if test "X$x" = "X$found_dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ ltrpathdirs="$ltrpathdirs $found_dir" ++ fi ++ if test "$acl_hardcode_direct" = yes; then ++ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" ++ else ++ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then ++ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" ++ haveit= ++ for x in $rpathdirs; do ++ if test "X$x" = "X$found_dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ rpathdirs="$rpathdirs $found_dir" ++ fi ++ else ++ haveit= ++ for x in $LDFLAGS $LIBICONV; do ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ eval x=\"$x\" ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ if test "X$x" = "X-L$found_dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" ++ fi ++ if test "$acl_hardcode_minus_L" != no; then ++ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" ++ else ++ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" ++ fi ++ fi ++ fi ++ fi ++ else ++ if test "X$found_a" != "X"; then ++ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" ++ else ++ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" ++ fi ++ fi ++ additional_includedir= ++ case "$found_dir" in ++ */$acl_libdirstem | */$acl_libdirstem/) ++ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` ++ if test "$name" = 'iconv'; then ++ LIBICONV_PREFIX="$basedir" ++ fi ++ additional_includedir="$basedir/include" ++ ;; ++ */$acl_libdirstem2 | */$acl_libdirstem2/) ++ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` ++ if test "$name" = 'iconv'; then ++ LIBICONV_PREFIX="$basedir" ++ fi ++ additional_includedir="$basedir/include" ++ ;; ++ esac ++ if test "X$additional_includedir" != "X"; then ++ if test "X$additional_includedir" != "X/usr/include"; then ++ haveit= ++ if test "X$additional_includedir" = "X/usr/local/include"; then ++ if test -n "$GCC"; then ++ case $host_os in ++ linux* | gnu* | k*bsd*-gnu) haveit=yes;; ++ esac ++ fi ++ fi ++ if test -z "$haveit"; then ++ for x in $CPPFLAGS $INCICONV; do ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ eval x=\"$x\" ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ if test "X$x" = "X-I$additional_includedir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ if test -d "$additional_includedir"; then ++ INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" ++ fi ++ fi ++ fi ++ fi ++ fi ++ if test -n "$found_la"; then ++ save_libdir="$libdir" ++ case "$found_la" in ++ */* | *\\*) . "$found_la" ;; ++ *) . "./$found_la" ;; ++ esac ++ libdir="$save_libdir" ++ for dep in $dependency_libs; do ++ case "$dep" in ++ -L*) ++ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` ++ if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ ++ && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then ++ haveit= ++ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ ++ || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then ++ if test -n "$GCC"; then ++ case $host_os in ++ linux* | gnu* | k*bsd*-gnu) haveit=yes;; ++ esac ++ fi ++ fi ++ if test -z "$haveit"; then ++ haveit= ++ for x in $LDFLAGS $LIBICONV; do ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ eval x=\"$x\" ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ if test "X$x" = "X-L$additional_libdir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ if test -d "$additional_libdir"; then ++ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" ++ fi ++ fi ++ haveit= ++ for x in $LDFLAGS $LTLIBICONV; do ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ eval x=\"$x\" ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ if test "X$x" = "X-L$additional_libdir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ if test -d "$additional_libdir"; then ++ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" ++ fi ++ fi ++ fi ++ fi ++ ;; ++ -R*) ++ dir=`echo "X$dep" | sed -e 's/^X-R//'` ++ if test "$enable_rpath" != no; then ++ haveit= ++ for x in $rpathdirs; do ++ if test "X$x" = "X$dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ rpathdirs="$rpathdirs $dir" ++ fi ++ haveit= ++ for x in $ltrpathdirs; do ++ if test "X$x" = "X$dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ ltrpathdirs="$ltrpathdirs $dir" ++ fi ++ fi ++ ;; ++ -l*) ++ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ++ ;; ++ *.la) ++ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ++ ;; ++ *) ++ LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" ++ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" ++ ;; ++ esac ++ done ++ fi ++ else ++ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" ++ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" ++ fi ++ fi ++ fi ++ done + done +- IFS="$ac_save_ifs" +- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" +- ;; +-esac ++ if test "X$rpathdirs" != "X"; then ++ if test -n "$acl_hardcode_libdir_separator"; then ++ alldirs= ++ for found_dir in $rpathdirs; do ++ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" ++ done ++ acl_save_libdir="$libdir" ++ libdir="$alldirs" ++ eval flag=\"$acl_hardcode_libdir_flag_spec\" ++ libdir="$acl_save_libdir" ++ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" ++ else ++ for found_dir in $rpathdirs; do ++ acl_save_libdir="$libdir" ++ libdir="$found_dir" ++ eval flag=\"$acl_hardcode_libdir_flag_spec\" ++ libdir="$acl_save_libdir" ++ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" ++ done ++ fi ++ fi ++ if test "X$ltrpathdirs" != "X"; then ++ for found_dir in $ltrpathdirs; do ++ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" ++ done ++ fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5 ++$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; } ++if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ gt_save_LIBS="$LIBS" ++ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <CoreFoundation/CFPreferences.h> ++int ++main () ++{ ++CFPreferencesCopyAppValue(NULL, NULL) ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ gt_cv_func_CFPreferencesCopyAppValue=yes ++else ++ gt_cv_func_CFPreferencesCopyAppValue=no + fi +-XGETTEXT="$ac_cv_path_XGETTEXT" +-if test -n "$XGETTEXT"; then +- echo "$ac_t""$XGETTEXT" 1>&6 ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++ LIBS="$gt_save_LIBS" ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5 ++$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; } ++ if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then ++ ++$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h ++ ++ fi ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5 ++$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; } ++if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ gt_save_LIBS="$LIBS" ++ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <CoreFoundation/CFLocale.h> ++int ++main () ++{ ++CFLocaleCopyCurrent(); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ gt_cv_func_CFLocaleCopyCurrent=yes + else +- echo "$ac_t""no" 1>&6 ++ gt_cv_func_CFLocaleCopyCurrent=no + fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++ LIBS="$gt_save_LIBS" ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5 ++$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; } ++ if test $gt_cv_func_CFLocaleCopyCurrent = yes; then ++ ++$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h + +- USE_INCLUDED_LIBINTL=yes +- CATOBJEXT=.cat +- INSTOBJEXT=.cat +- DATADIRNAME=lib +- INTLDEPS='$(top_builddir)/intl/libintl.a' +- INTLLIBS=$INTLDEPS +- LIBS=`echo $LIBS | sed -e 's/-lintl//'` +- nls_cv_header_intl=intl/libintl.h +- nls_cv_header_libgt=intl/libgettext.h +- fi ++ fi ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyPreferredLanguages" >&5 ++$as_echo_n "checking for CFLocaleCopyPreferredLanguages... " >&6; } ++if ${gt_cv_func_CFLocaleCopyPreferredLanguages+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ gt_save_LIBS="$LIBS" ++ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <CoreFoundation/CFLocale.h> ++int ++main () ++{ ++CFLocaleCopyPreferredLanguages(); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ gt_cv_func_CFLocaleCopyPreferredLanguages=yes + else +- echo "$ac_t""no" 1>&6 ++ gt_cv_func_CFLocaleCopyPreferredLanguages=no ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++ LIBS="$gt_save_LIBS" + fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyPreferredLanguages" >&5 ++$as_echo "$gt_cv_func_CFLocaleCopyPreferredLanguages" >&6; } ++ if test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then + +- fi +- fi ++$as_echo "#define HAVE_CFLOCALECOPYPREFERREDLANGUAGES 1" >>confdefs.h + +- if test "$CATOBJEXT" = "NONE"; then +- nls_cv_use_gnu_gettext=yes ++ fi ++ INTL_MACOSX_LIBS= ++ if test $gt_cv_func_CFPreferencesCopyAppValue = yes \ ++ || test $gt_cv_func_CFLocaleCopyCurrent = yes \ ++ || test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then ++ INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" ++ fi ++ ++ ++ ++ ++ ++ ++ LIBINTL= ++ LTLIBINTL= ++ POSUB= ++ ++ case " $gt_needs " in ++ *" need-formatstring-macros "*) gt_api_version=3 ;; ++ *" need-ngettext "*) gt_api_version=2 ;; ++ *) gt_api_version=1 ;; ++ esac ++ gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" ++ gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" ++ ++ if test "$USE_NLS" = "yes"; then ++ gt_use_preinstalled_gnugettext=no ++ ++ ++ if test $gt_api_version -ge 3; then ++ gt_revision_test_code=' ++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION ++#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) ++#endif ++typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; ++' ++ else ++ gt_revision_test_code= ++ fi ++ if test $gt_api_version -ge 2; then ++ gt_expression_test_code=' + * ngettext ("", "", 0)' ++ else ++ gt_expression_test_code= + fi +- fi + +- if test "$nls_cv_use_gnu_gettext" = "yes"; then +- INTLOBJS="\$(GETTOBJS)" +- # Extract the first word of "msgfmt", so it can be a program name with args. +-set dummy msgfmt; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:4437: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5 ++$as_echo_n "checking for GNU gettext in libc... " >&6; } ++if eval \${$gt_func_gnugettext_libc+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- case "$MSGFMT" in +- /*) +- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. +- ;; +- *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then +- ac_cv_path_MSGFMT="$ac_dir/$ac_word" +- break ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++#include <libintl.h> ++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION ++extern int _nl_msg_cat_cntr; ++extern int *_nl_domain_bindings; ++#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings) ++#else ++#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 ++#endif ++$gt_revision_test_code ++ ++int ++main () ++{ ++ ++bindtextdomain ("", ""); ++return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ eval "$gt_func_gnugettext_libc=yes" ++else ++ eval "$gt_func_gnugettext_libc=no" ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++eval ac_res=\$$gt_func_gnugettext_libc ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++ ++ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then ++ ++ ++ ++ ++ ++ am_save_CPPFLAGS="$CPPFLAGS" ++ ++ for element in $INCICONV; do ++ haveit= ++ for x in $CPPFLAGS; do ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ eval x=\"$x\" ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ if test "X$x" = "X$element"; then ++ haveit=yes ++ break + fi ++ done ++ if test -z "$haveit"; then ++ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" + fi + done +- IFS="$ac_save_ifs" +- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt" +- ;; +-esac +-fi +-MSGFMT="$ac_cv_path_MSGFMT" +-if test -n "$MSGFMT"; then +- echo "$ac_t""$MSGFMT" 1>&6 +-else +- echo "$ac_t""no" 1>&6 +-fi + +- # Extract the first word of "gmsgfmt", so it can be a program name with args. +-set dummy gmsgfmt; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:4471: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5 ++$as_echo_n "checking for iconv... " >&6; } ++if ${am_cv_func_iconv+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- case "$GMSGFMT" in +- /*) +- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. +- ;; +- *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- ac_cv_path_GMSGFMT="$ac_dir/$ac_word" +- break ++ ++ am_cv_func_iconv="no, consider installing GNU libiconv" ++ am_cv_lib_iconv=no ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++#include <stdlib.h> ++#include <iconv.h> ++ ++int ++main () ++{ ++iconv_t cd = iconv_open("",""); ++ iconv(cd,NULL,NULL,NULL,NULL); ++ iconv_close(cd); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ am_cv_func_iconv=yes ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++ if test "$am_cv_func_iconv" != yes; then ++ am_save_LIBS="$LIBS" ++ LIBS="$LIBS $LIBICONV" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++#include <stdlib.h> ++#include <iconv.h> ++ ++int ++main () ++{ ++iconv_t cd = iconv_open("",""); ++ iconv(cd,NULL,NULL,NULL,NULL); ++ iconv_close(cd); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ am_cv_lib_iconv=yes ++ am_cv_func_iconv=yes ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++ LIBS="$am_save_LIBS" + fi +- done +- IFS="$ac_save_ifs" +- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" +- ;; +-esac ++ + fi +-GMSGFMT="$ac_cv_path_GMSGFMT" +-if test -n "$GMSGFMT"; then +- echo "$ac_t""$GMSGFMT" 1>&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5 ++$as_echo "$am_cv_func_iconv" >&6; } ++ if test "$am_cv_func_iconv" = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5 ++$as_echo_n "checking for working iconv... " >&6; } ++if ${am_cv_func_iconv_works+:} false; then : ++ $as_echo_n "(cached) " >&6 + else +- echo "$ac_t""no" 1>&6 +-fi + +- # Extract the first word of "xgettext", so it can be a program name with args. +-set dummy xgettext; ac_word=$2 +-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +-echo "configure:4503: checking for $ac_word" >&5 +-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 ++ am_save_LIBS="$LIBS" ++ if test $am_cv_lib_iconv = yes; then ++ LIBS="$LIBS $LIBICONV" ++ fi ++ am_cv_func_iconv_works=no ++ for ac_iconv_const in '' 'const'; do ++ if test "$cross_compiling" = yes; then : ++ case "$host_os" in ++ aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; ++ *) am_cv_func_iconv_works="guessing yes" ;; ++ esac + else +- case "$XGETTEXT" in +- /*) +- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. +- ;; +- *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then +- ac_cv_path_XGETTEXT="$ac_dir/$ac_word" +- break ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++#include <iconv.h> ++#include <string.h> ++ ++#ifndef ICONV_CONST ++# define ICONV_CONST $ac_iconv_const ++#endif ++ ++int ++main () ++{ ++int result = 0; ++ /* Test against AIX 5.1 bug: Failures are not distinguishable from successful ++ returns. */ ++ { ++ iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); ++ if (cd_utf8_to_88591 != (iconv_t)(-1)) ++ { ++ static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */ ++ char buf[10]; ++ ICONV_CONST char *inptr = input; ++ size_t inbytesleft = strlen (input); ++ char *outptr = buf; ++ size_t outbytesleft = sizeof (buf); ++ size_t res = iconv (cd_utf8_to_88591, ++ &inptr, &inbytesleft, ++ &outptr, &outbytesleft); ++ if (res == 0) ++ result |= 1; ++ iconv_close (cd_utf8_to_88591); ++ } ++ } ++ /* Test against Solaris 10 bug: Failures are not distinguishable from ++ successful returns. */ ++ { ++ iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); ++ if (cd_ascii_to_88591 != (iconv_t)(-1)) ++ { ++ static ICONV_CONST char input[] = "\263"; ++ char buf[10]; ++ ICONV_CONST char *inptr = input; ++ size_t inbytesleft = strlen (input); ++ char *outptr = buf; ++ size_t outbytesleft = sizeof (buf); ++ size_t res = iconv (cd_ascii_to_88591, ++ &inptr, &inbytesleft, ++ &outptr, &outbytesleft); ++ if (res == 0) ++ result |= 2; ++ iconv_close (cd_ascii_to_88591); ++ } ++ } ++ /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ ++ { ++ iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); ++ if (cd_88591_to_utf8 != (iconv_t)(-1)) ++ { ++ static ICONV_CONST char input[] = "\304"; ++ static char buf[2] = { (char)0xDE, (char)0xAD }; ++ ICONV_CONST char *inptr = input; ++ size_t inbytesleft = 1; ++ char *outptr = buf; ++ size_t outbytesleft = 1; ++ size_t res = iconv (cd_88591_to_utf8, ++ &inptr, &inbytesleft, ++ &outptr, &outbytesleft); ++ if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) ++ result |= 4; ++ iconv_close (cd_88591_to_utf8); ++ } ++ } ++#if 0 /* This bug could be worked around by the caller. */ ++ /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ ++ { ++ iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); ++ if (cd_88591_to_utf8 != (iconv_t)(-1)) ++ { ++ static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; ++ char buf[50]; ++ ICONV_CONST char *inptr = input; ++ size_t inbytesleft = strlen (input); ++ char *outptr = buf; ++ size_t outbytesleft = sizeof (buf); ++ size_t res = iconv (cd_88591_to_utf8, ++ &inptr, &inbytesleft, ++ &outptr, &outbytesleft); ++ if ((int)res > 0) ++ result |= 8; ++ iconv_close (cd_88591_to_utf8); ++ } ++ } ++#endif ++ /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is ++ provided. */ ++ { ++ /* Try standardized names. */ ++ iconv_t cd1 = iconv_open ("UTF-8", "EUC-JP"); ++ /* Try IRIX, OSF/1 names. */ ++ iconv_t cd2 = iconv_open ("UTF-8", "eucJP"); ++ /* Try AIX names. */ ++ iconv_t cd3 = iconv_open ("UTF-8", "IBM-eucJP"); ++ /* Try HP-UX names. */ ++ iconv_t cd4 = iconv_open ("utf8", "eucJP"); ++ if (cd1 == (iconv_t)(-1) && cd2 == (iconv_t)(-1) ++ && cd3 == (iconv_t)(-1) && cd4 == (iconv_t)(-1)) ++ result |= 16; ++ if (cd1 != (iconv_t)(-1)) ++ iconv_close (cd1); ++ if (cd2 != (iconv_t)(-1)) ++ iconv_close (cd2); ++ if (cd3 != (iconv_t)(-1)) ++ iconv_close (cd3); ++ if (cd4 != (iconv_t)(-1)) ++ iconv_close (cd4); ++ } ++ return result; ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_run "$LINENO"; then : ++ am_cv_func_iconv_works=yes ++fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext ++fi ++ ++ test "$am_cv_func_iconv_works" = no || break ++ done ++ LIBS="$am_save_LIBS" ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5 ++$as_echo "$am_cv_func_iconv_works" >&6; } ++ case "$am_cv_func_iconv_works" in ++ *no) am_func_iconv=no am_cv_lib_iconv=no ;; ++ *) am_func_iconv=yes ;; ++ esac ++ else ++ am_func_iconv=no am_cv_lib_iconv=no ++ fi ++ if test "$am_func_iconv" = yes; then ++ ++$as_echo "#define HAVE_ICONV 1" >>confdefs.h ++ ++ fi ++ if test "$am_cv_lib_iconv" = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5 ++$as_echo_n "checking how to link with libiconv... " >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5 ++$as_echo "$LIBICONV" >&6; } ++ else ++ CPPFLAGS="$am_save_CPPFLAGS" ++ LIBICONV= ++ LTLIBICONV= ++ fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ use_additional=yes ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ ++ eval additional_includedir=\"$includedir\" ++ eval additional_libdir=\"$libdir\" ++ ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ ++# Check whether --with-libintl-prefix was given. ++if test "${with_libintl_prefix+set}" = set; then : ++ withval=$with_libintl_prefix; ++ if test "X$withval" = "Xno"; then ++ use_additional=no ++ else ++ if test "X$withval" = "X"; then ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ ++ eval additional_includedir=\"$includedir\" ++ eval additional_libdir=\"$libdir\" ++ ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ else ++ additional_includedir="$withval/include" ++ additional_libdir="$withval/$acl_libdirstem" ++ if test "$acl_libdirstem2" != "$acl_libdirstem" \ ++ && test ! -d "$withval/$acl_libdirstem"; then ++ additional_libdir="$withval/$acl_libdirstem2" ++ fi + fi + fi +- done +- IFS="$ac_save_ifs" +- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" +- ;; +-esac +-fi +-XGETTEXT="$ac_cv_path_XGETTEXT" +-if test -n "$XGETTEXT"; then +- echo "$ac_t""$XGETTEXT" 1>&6 +-else +- echo "$ac_t""no" 1>&6 ++ + fi + +- +- USE_INCLUDED_LIBINTL=yes +- CATOBJEXT=.gmo +- INSTOBJEXT=.mo +- DATADIRNAME=share +- INTLDEPS='$(top_builddir)/intl/libintl.a' +- INTLLIBS=$INTLDEPS +- LIBS=`echo $LIBS | sed -e 's/-lintl//'` +- nls_cv_header_intl=intl/libintl.h +- nls_cv_header_libgt=intl/libgettext.h ++ LIBINTL= ++ LTLIBINTL= ++ INCINTL= ++ LIBINTL_PREFIX= ++ HAVE_LIBINTL= ++ rpathdirs= ++ ltrpathdirs= ++ names_already_handled= ++ names_next_round='intl ' ++ while test -n "$names_next_round"; do ++ names_this_round="$names_next_round" ++ names_next_round= ++ for name in $names_this_round; do ++ already_handled= ++ for n in $names_already_handled; do ++ if test "$n" = "$name"; then ++ already_handled=yes ++ break ++ fi ++ done ++ if test -z "$already_handled"; then ++ names_already_handled="$names_already_handled $name" ++ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` ++ eval value=\"\$HAVE_LIB$uppername\" ++ if test -n "$value"; then ++ if test "$value" = yes; then ++ eval value=\"\$LIB$uppername\" ++ test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" ++ eval value=\"\$LTLIB$uppername\" ++ test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" ++ else ++ : ++ fi ++ else ++ found_dir= ++ found_la= ++ found_so= ++ found_a= ++ eval libname=\"$acl_libname_spec\" # typically: libname=lib$name ++ if test -n "$acl_shlibext"; then ++ shrext=".$acl_shlibext" # typically: shrext=.so ++ else ++ shrext= ++ fi ++ if test $use_additional = yes; then ++ dir="$additional_libdir" ++ if test -n "$acl_shlibext"; then ++ if test -f "$dir/$libname$shrext"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext" ++ else ++ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ++ ver=`(cd "$dir" && \ ++ for f in "$libname$shrext".*; do echo "$f"; done \ ++ | sed -e "s,^$libname$shrext\\\\.,," \ ++ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ ++ | sed 1q ) 2>/dev/null` ++ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext.$ver" ++ fi ++ else ++ eval library_names=\"$acl_library_names_spec\" ++ for f in $library_names; do ++ if test -f "$dir/$f"; then ++ found_dir="$dir" ++ found_so="$dir/$f" ++ break ++ fi ++ done ++ fi ++ fi ++ fi ++ if test "X$found_dir" = "X"; then ++ if test -f "$dir/$libname.$acl_libext"; then ++ found_dir="$dir" ++ found_a="$dir/$libname.$acl_libext" ++ fi ++ fi ++ if test "X$found_dir" != "X"; then ++ if test -f "$dir/$libname.la"; then ++ found_la="$dir/$libname.la" ++ fi ++ fi ++ fi ++ if test "X$found_dir" = "X"; then ++ for x in $LDFLAGS $LTLIBINTL; do ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ eval x=\"$x\" ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ case "$x" in ++ -L*) ++ dir=`echo "X$x" | sed -e 's/^X-L//'` ++ if test -n "$acl_shlibext"; then ++ if test -f "$dir/$libname$shrext"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext" ++ else ++ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ++ ver=`(cd "$dir" && \ ++ for f in "$libname$shrext".*; do echo "$f"; done \ ++ | sed -e "s,^$libname$shrext\\\\.,," \ ++ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ ++ | sed 1q ) 2>/dev/null` ++ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext.$ver" ++ fi ++ else ++ eval library_names=\"$acl_library_names_spec\" ++ for f in $library_names; do ++ if test -f "$dir/$f"; then ++ found_dir="$dir" ++ found_so="$dir/$f" ++ break ++ fi ++ done ++ fi ++ fi ++ fi ++ if test "X$found_dir" = "X"; then ++ if test -f "$dir/$libname.$acl_libext"; then ++ found_dir="$dir" ++ found_a="$dir/$libname.$acl_libext" ++ fi ++ fi ++ if test "X$found_dir" != "X"; then ++ if test -f "$dir/$libname.la"; then ++ found_la="$dir/$libname.la" ++ fi ++ fi ++ ;; ++ esac ++ if test "X$found_dir" != "X"; then ++ break ++ fi ++ done ++ fi ++ if test "X$found_dir" != "X"; then ++ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" ++ if test "X$found_so" != "X"; then ++ if test "$enable_rpath" = no \ ++ || test "X$found_dir" = "X/usr/$acl_libdirstem" \ ++ || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then ++ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" ++ else ++ haveit= ++ for x in $ltrpathdirs; do ++ if test "X$x" = "X$found_dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ ltrpathdirs="$ltrpathdirs $found_dir" ++ fi ++ if test "$acl_hardcode_direct" = yes; then ++ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" ++ else ++ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then ++ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" ++ haveit= ++ for x in $rpathdirs; do ++ if test "X$x" = "X$found_dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ rpathdirs="$rpathdirs $found_dir" ++ fi ++ else ++ haveit= ++ for x in $LDFLAGS $LIBINTL; do ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ eval x=\"$x\" ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ if test "X$x" = "X-L$found_dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" ++ fi ++ if test "$acl_hardcode_minus_L" != no; then ++ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" ++ else ++ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" ++ fi ++ fi ++ fi ++ fi ++ else ++ if test "X$found_a" != "X"; then ++ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" ++ else ++ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" ++ fi ++ fi ++ additional_includedir= ++ case "$found_dir" in ++ */$acl_libdirstem | */$acl_libdirstem/) ++ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` ++ if test "$name" = 'intl'; then ++ LIBINTL_PREFIX="$basedir" ++ fi ++ additional_includedir="$basedir/include" ++ ;; ++ */$acl_libdirstem2 | */$acl_libdirstem2/) ++ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` ++ if test "$name" = 'intl'; then ++ LIBINTL_PREFIX="$basedir" ++ fi ++ additional_includedir="$basedir/include" ++ ;; ++ esac ++ if test "X$additional_includedir" != "X"; then ++ if test "X$additional_includedir" != "X/usr/include"; then ++ haveit= ++ if test "X$additional_includedir" = "X/usr/local/include"; then ++ if test -n "$GCC"; then ++ case $host_os in ++ linux* | gnu* | k*bsd*-gnu) haveit=yes;; ++ esac ++ fi ++ fi ++ if test -z "$haveit"; then ++ for x in $CPPFLAGS $INCINTL; do ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ eval x=\"$x\" ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ if test "X$x" = "X-I$additional_includedir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ if test -d "$additional_includedir"; then ++ INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" ++ fi ++ fi ++ fi ++ fi ++ fi ++ if test -n "$found_la"; then ++ save_libdir="$libdir" ++ case "$found_la" in ++ */* | *\\*) . "$found_la" ;; ++ *) . "./$found_la" ;; ++ esac ++ libdir="$save_libdir" ++ for dep in $dependency_libs; do ++ case "$dep" in ++ -L*) ++ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` ++ if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ ++ && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then ++ haveit= ++ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ ++ || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then ++ if test -n "$GCC"; then ++ case $host_os in ++ linux* | gnu* | k*bsd*-gnu) haveit=yes;; ++ esac ++ fi ++ fi ++ if test -z "$haveit"; then ++ haveit= ++ for x in $LDFLAGS $LIBINTL; do ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ eval x=\"$x\" ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ if test "X$x" = "X-L$additional_libdir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ if test -d "$additional_libdir"; then ++ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir" ++ fi ++ fi ++ haveit= ++ for x in $LDFLAGS $LTLIBINTL; do ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ eval x=\"$x\" ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ if test "X$x" = "X-L$additional_libdir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ if test -d "$additional_libdir"; then ++ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir" ++ fi ++ fi ++ fi ++ fi ++ ;; ++ -R*) ++ dir=`echo "X$dep" | sed -e 's/^X-R//'` ++ if test "$enable_rpath" != no; then ++ haveit= ++ for x in $rpathdirs; do ++ if test "X$x" = "X$dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ rpathdirs="$rpathdirs $dir" ++ fi ++ haveit= ++ for x in $ltrpathdirs; do ++ if test "X$x" = "X$dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ ltrpathdirs="$ltrpathdirs $dir" ++ fi ++ fi ++ ;; ++ -l*) ++ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ++ ;; ++ *.la) ++ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ++ ;; ++ *) ++ LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" ++ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" ++ ;; ++ esac ++ done ++ fi ++ else ++ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" ++ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" ++ fi ++ fi + fi ++ done ++ done ++ if test "X$rpathdirs" != "X"; then ++ if test -n "$acl_hardcode_libdir_separator"; then ++ alldirs= ++ for found_dir in $rpathdirs; do ++ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" ++ done ++ acl_save_libdir="$libdir" ++ libdir="$alldirs" ++ eval flag=\"$acl_hardcode_libdir_flag_spec\" ++ libdir="$acl_save_libdir" ++ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" ++ else ++ for found_dir in $rpathdirs; do ++ acl_save_libdir="$libdir" ++ libdir="$found_dir" ++ eval flag=\"$acl_hardcode_libdir_flag_spec\" ++ libdir="$acl_save_libdir" ++ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" ++ done ++ fi ++ fi ++ if test "X$ltrpathdirs" != "X"; then ++ for found_dir in $ltrpathdirs; do ++ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" ++ done ++ fi + +- if test "$XGETTEXT" != ":"; then +- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then +- : ; +- else +- echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6 +- XGETTEXT=":" +- fi ++ ++ ++ ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5 ++$as_echo_n "checking for GNU gettext in libintl... " >&6; } ++if eval \${$gt_func_gnugettext_libintl+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ gt_save_CPPFLAGS="$CPPFLAGS" ++ CPPFLAGS="$CPPFLAGS $INCINTL" ++ gt_save_LIBS="$LIBS" ++ LIBS="$LIBS $LIBINTL" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++#include <libintl.h> ++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION ++extern int _nl_msg_cat_cntr; ++extern ++#ifdef __cplusplus ++"C" ++#endif ++const char *_nl_expand_alias (const char *); ++#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) ++#else ++#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 ++#endif ++$gt_revision_test_code ++ ++int ++main () ++{ ++ ++bindtextdomain ("", ""); ++return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ eval "$gt_func_gnugettext_libintl=yes" ++else ++ eval "$gt_func_gnugettext_libintl=no" ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then ++ LIBS="$LIBS $LIBICONV" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++#include <libintl.h> ++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION ++extern int _nl_msg_cat_cntr; ++extern ++#ifdef __cplusplus ++"C" ++#endif ++const char *_nl_expand_alias (const char *); ++#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) ++#else ++#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 ++#endif ++$gt_revision_test_code ++ ++int ++main () ++{ ++ ++bindtextdomain ("", ""); ++return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ LIBINTL="$LIBINTL $LIBICONV" ++ LTLIBINTL="$LTLIBINTL $LTLIBICONV" ++ eval "$gt_func_gnugettext_libintl=yes" ++ ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++ fi ++ CPPFLAGS="$gt_save_CPPFLAGS" ++ LIBS="$gt_save_LIBS" ++fi ++eval ac_res=\$$gt_func_gnugettext_libintl ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++ fi ++ ++ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ ++ || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ ++ && test "$PACKAGE" != gettext-runtime \ ++ && test "$PACKAGE" != gettext-tools; }; then ++ gt_use_preinstalled_gnugettext=yes ++ else ++ LIBINTL= ++ LTLIBINTL= ++ INCINTL= ++ fi ++ ++ ++ ++ if test -n "$INTL_MACOSX_LIBS"; then ++ if test "$gt_use_preinstalled_gnugettext" = "yes" \ ++ || test "$nls_cv_use_gnu_gettext" = "yes"; then ++ LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" ++ LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" + fi ++ fi ++ ++ if test "$gt_use_preinstalled_gnugettext" = "yes" \ ++ || test "$nls_cv_use_gnu_gettext" = "yes"; then ++ ++$as_echo "#define ENABLE_NLS 1" >>confdefs.h + +- # We need to process the po/ directory. +- POSUB=po + else +- DATADIRNAME=share +- nls_cv_header_intl=intl/libintl.h +- nls_cv_header_libgt=intl/libgettext.h ++ USE_NLS=no + fi ++ fi + +- # If this is used in GNU gettext we have to set USE_NLS to `yes' +- # because some of the sources are only built for this goal. +- if test "$PACKAGE" = gettext; then +- USE_NLS=yes +- USE_INCLUDED_LIBINTL=yes ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5 ++$as_echo_n "checking whether to use NLS... " >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 ++$as_echo "$USE_NLS" >&6; } ++ if test "$USE_NLS" = "yes"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5 ++$as_echo_n "checking where the gettext function comes from... " >&6; } ++ if test "$gt_use_preinstalled_gnugettext" = "yes"; then ++ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then ++ gt_source="external libintl" ++ else ++ gt_source="libc" ++ fi ++ else ++ gt_source="included intl directory" + fi ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5 ++$as_echo "$gt_source" >&6; } ++ fi ++ ++ if test "$USE_NLS" = "yes"; then + +- for lang in $ALL_LINGUAS; do +- GMOFILES="$GMOFILES $lang.gmo" +- POFILES="$POFILES $lang.po" ++ if test "$gt_use_preinstalled_gnugettext" = "yes"; then ++ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5 ++$as_echo_n "checking how to link with libintl... " >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5 ++$as_echo "$LIBINTL" >&6; } ++ ++ for element in $INCINTL; do ++ haveit= ++ for x in $CPPFLAGS; do ++ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ eval x=\"$x\" ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++ ++ if test "X$x" = "X$element"; then ++ haveit=yes ++ break ++ fi + done ++ if test -z "$haveit"; then ++ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" ++ fi ++ done + +- +- +- +- +- +- +- +- +- +- +- +- +- +- if test "x$CATOBJEXT" != "x"; then +- if test "x$ALL_LINGUAS" = "x"; then +- LINGUAS= +- else +- echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 +-echo "configure:4593: checking for catalogs to be installed" >&5 +- NEW_LINGUAS= +- for lang in ${LINGUAS=$ALL_LINGUAS}; do +- case "$ALL_LINGUAS" in +- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; +- esac +- done +- LINGUAS=$NEW_LINGUAS +- echo "$ac_t""$LINGUAS" 1>&6 +- fi ++ fi + +- if test -n "$LINGUAS"; then +- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done +- fi +- fi + +- if test $ac_cv_header_locale_h = yes; then +- INCLUDE_LOCALE_H="#include <locale.h>" +- else +- INCLUDE_LOCALE_H="\ +-/* The system does not provide the header <locale.h>. Take care yourself. */" +- fi +- ++$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h + +- test -d intl || mkdir intl +- if test "$CATOBJEXT" = ".cat"; then +- ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` +-echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 +-echo "configure:4621: checking for linux/version.h" >&5 +-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then +- echo $ac_n "(cached) $ac_c" 1>&6 +-else +- cat > conftest.$ac_ext <<EOF +-#line 4626 "configure" +-#include "confdefs.h" +-#include <linux/version.h> +-EOF +-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +-{ (eval echo configure:4631: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +-ac_err=`grep -v '^ *+' conftest.out` +-if test -z "$ac_err"; then +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=yes" +-else +- echo "$ac_err" >&5 +- echo "configure: failed program was:" >&5 +- cat conftest.$ac_ext >&5 +- rm -rf conftest* +- eval "ac_cv_header_$ac_safe=no" +-fi +-rm -f conftest* +-fi +-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then +- echo "$ac_t""yes" 1>&6 +- msgformat=linux +-else +- echo "$ac_t""no" 1>&6 +-msgformat=xopen +-fi + ++$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h + +- sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed +- fi +- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \ +- $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed ++ fi + +- if test "$PACKAGE" = "gettext"; then +- GT_NO="#NO#" +- GT_YES= +- else +- GT_NO= +- GT_YES="#YES#" +- fi +- +- ++ POSUB=po ++ fi + +- MKINSTALLDIRS= +- if test -n "$ac_aux_dir"; then +- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" +- fi +- if test -z "$MKINSTALLDIRS"; then +- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" +- fi +- + +- l= +- + +- test -d po || mkdir po +- if test "x$srcdir" != "x."; then +- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then +- posrcprefix="$srcdir/" +- else +- posrcprefix="../$srcdir/" +- fi +- else +- posrcprefix="../" +- fi +- rm -f po/POTFILES +- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ +- < $srcdir/po/POTFILES.in > po/POTFILES +- ++ INTLLIBS="$LIBINTL" ++ ++ + +-cat >> confdefs.h <<EOF +-#define LOCALEDIR "$prefix/$DATADIRNAME" +-EOF + + + +-trap '' 1 2 15 +-cat > confcache <<\EOF ++ ++ac_config_files="$ac_config_files Makefile lib/Makefile testsuite/Makefile man/Makefile po/Makefile.in src/Makefile debian/rules Specfile systype src/lrzszbug" ++ ++ac_config_commands="$ac_config_commands default" ++ ++cat >confcache <<\_ACEOF + # This file is a shell script that caches the results of configure + # tests run on this system so they can be shared between configure +-# scripts and configure runs. It is not useful on other systems. +-# If it contains results you don't want to keep, you may remove or edit it. ++# scripts and configure runs, see configure's option --config-cache. ++# It is not useful on other systems. If it contains results you don't ++# want to keep, you may remove or edit it. + # +-# By default, configure uses ./config.cache as the cache file, +-# creating it if it does not exist already. You can give configure +-# the --cache-file=FILE option to use a different cache file; that is +-# what configure does when it calls configure scripts in +-# subdirectories, so they share the cache. +-# Giving --cache-file=/dev/null disables caching, for debugging configure. +-# config.status only pays attention to the cache file if you give it the +-# --recheck option to rerun configure. ++# config.status only pays attention to the cache file if you give it ++# the --recheck option to rerun configure. + # +-EOF ++# `ac_cv_env_foo' variables (set or unset) will be overridden when ++# loading this file, other *unset* `ac_cv_foo' will be assigned the ++# following values. ++ ++_ACEOF ++ + # The following way of writing the cache mishandles newlines in values, + # but we know of no workaround that is simple, portable, and efficient. +-# So, don't put newlines in cache variables' values. ++# So, we kill variables containing newlines. + # Ultrix sh set writes to stderr and can't be redirected directly, + # and sets the high bit in the cache file unless we assign to the vars. +-(set) 2>&1 | +- case `(ac_space=' '; set) 2>&1` in +- *ac_space=\ *) +- # `set' does not quote correctly, so add quotes (double-quote substitution +- # turns \\\\ into \\, and sed turns \\ into \). +- sed -n \ +- -e "s/'/'\\\\''/g" \ +- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" +- ;; +- *) +- # `set' quotes correctly as required by POSIX, so do not add quotes. +- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' +- ;; +- esac >> confcache +-if cmp -s $cache_file confcache; then +- : +-else +- if test -w $cache_file; then +- echo "updating cache $cache_file" +- cat confcache > $cache_file ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 ++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( ++ *) { eval $ac_var=; unset $ac_var;} ;; ++ esac ;; ++ esac ++ done ++ ++ (set) 2>&1 | ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ # `set' does not quote correctly, so add quotes: double-quote ++ # substitution turns \\\\ into \\, and sed turns \\ into \. ++ sed -n \ ++ "s/'/'\\\\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ++ ;; #( ++ *) ++ # `set' quotes correctly as required by POSIX, so do not add quotes. ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) | ++ sed ' ++ /^ac_cv_env_/b end ++ t clear ++ :clear ++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ ++ t end ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ if test "x$cache_file" != "x/dev/null"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 ++$as_echo "$as_me: updating cache $cache_file" >&6;} ++ if test ! -f "$cache_file" || test -h "$cache_file"; then ++ cat confcache >"$cache_file" ++ else ++ case $cache_file in #( ++ */* | ?:*) ++ mv -f confcache "$cache_file"$$ && ++ mv -f "$cache_file"$$ "$cache_file" ;; #( ++ *) ++ mv -f confcache "$cache_file" ;; ++ esac ++ fi ++ fi + else +- echo "not updating unwritable cache $cache_file" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 ++$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi + fi + rm -f confcache + +-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 +- + test "x$prefix" = xNONE && prefix=$ac_default_prefix + # Let make expand exec_prefix. + test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +-# Any assignment to VPATH causes Sun make to only execute +-# the first set of double-colon rules, so remove it if not needed. +-# If there is a colon in the path, we need to keep it. +-if test "x$srcdir" = x.; then +- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +-fi ++DEFS=-DHAVE_CONFIG_H + +-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 ++ac_libobjs= ++ac_ltlibobjs= ++for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue ++ # 1. Remove the extension, and $U if already installed. ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`$as_echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' ++done ++LIBOBJS=$ac_libobjs + +-DEFS=-DHAVE_CONFIG_H ++LTLIBOBJS=$ac_ltlibobjs + +-# Without the "./", some shells look in PATH for config.status. +-: ${CONFIG_STATUS=./config.status} + +-echo creating $CONFIG_STATUS +-rm -f $CONFIG_STATUS +-cat > $CONFIG_STATUS <<EOF +-#! /bin/sh +-# Generated automatically by configure. ++ if test -n "$EXEEXT"; then ++ am__EXEEXT_TRUE= ++ am__EXEEXT_FALSE='#' ++else ++ am__EXEEXT_TRUE='#' ++ am__EXEEXT_FALSE= ++fi ++ ++if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then ++ as_fn_error $? "conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 ++fi ++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then ++ as_fn_error $? "conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 ++fi ++ ++: "${CONFIG_STATUS=./config.status}" ++ac_write_fail=0 ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files $CONFIG_STATUS" ++{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 ++$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} ++as_write_fail=0 ++cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 ++#! $SHELL ++# Generated by $as_me. + # Run this file to recreate the current configuration. +-# This directory was configured as follows, +-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +-# +-# $0 $ac_configure_args +-# + # Compiler output produced by configure, useful for debugging +-# configure, is in ./config.log if it exists. ++# configure, is in config.log if it exists. + +-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +-for ac_option ++debug=false ++ac_cs_recheck=false ++ac_cs_silent=false ++ ++SHELL=\${CONFIG_SHELL-$SHELL} ++export SHELL ++_ASEOF ++cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ++## -------------------- ## ++## M4sh Initialization. ## ++## -------------------- ## ++ ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : ++ emulate sh ++ NULLCMD=: ++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in #( ++ *posix*) : ++ set -o posix ;; #( ++ *) : ++ ;; ++esac ++fi ++ ++ ++as_nl=' ++' ++export as_nl ++as_echo='printf %s\n' ++as_echo_n='printf %s' ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { ++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || ++ PATH_SEPARATOR=';' ++ } ++fi ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++as_myself= ++case $0 in #(( ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH + do +- case "\$ac_option" in +- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) +- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" +- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; +- -version | --version | --versio | --versi | --vers | --ver | --ve | --v) +- echo "$CONFIG_STATUS generated by autoconf version 2.12" +- exit 0 ;; +- -help | --help | --hel | --he | --h) +- echo "\$ac_cs_usage"; exit 0 ;; +- *) echo "\$ac_cs_usage"; exit 1 ;; +- esac ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++ done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ exit 1 ++fi ++ ++# Unset variables that we do not need and which cause bugs (e.g. in ++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" ++# suppresses any "Segmentation fault" message there. '((' could ++# trigger a bug in pdksh 5.2.14. ++for as_var in BASH_ENV ENV MAIL MAILPATH ++do eval test x\${$as_var+set} = xset \ ++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : + done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' + +-ac_given_srcdir=$srcdir +-ac_given_INSTALL="$INSTALL" ++# NLS nuisances. ++LC_ALL=C ++export LC_ALL ++LANGUAGE=C ++export LANGUAGE ++ ++# CDPATH. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +-trap 'rm -fr `echo "Makefile intl/Makefile lib/Makefile testsuite/Makefile \ +-man/Makefile po/Makefile.in src/Makefile debian/rules Specfile systype \ +-src/lrzszbug config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +-EOF +-cat >> $CONFIG_STATUS <<EOF +- +-# Protect against being on the right side of a sed subst in config.status. +-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; +- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF +-$ac_vpsub +-$extrasub +-s%@CFLAGS@%$CFLAGS%g +-s%@CPPFLAGS@%$CPPFLAGS%g +-s%@CXXFLAGS@%$CXXFLAGS%g +-s%@DEFS@%$DEFS%g +-s%@LDFLAGS@%$LDFLAGS%g +-s%@LIBS@%$LIBS%g +-s%@exec_prefix@%$exec_prefix%g +-s%@prefix@%$prefix%g +-s%@program_transform_name@%$program_transform_name%g +-s%@bindir@%$bindir%g +-s%@sbindir@%$sbindir%g +-s%@libexecdir@%$libexecdir%g +-s%@datadir@%$datadir%g +-s%@sysconfdir@%$sysconfdir%g +-s%@sharedstatedir@%$sharedstatedir%g +-s%@localstatedir@%$localstatedir%g +-s%@libdir@%$libdir%g +-s%@includedir@%$includedir%g +-s%@oldincludedir@%$oldincludedir%g +-s%@infodir@%$infodir%g +-s%@mandir@%$mandir%g +-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +-s%@INSTALL_DATA@%$INSTALL_DATA%g +-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g +-s%@PACKAGE@%$PACKAGE%g +-s%@VERSION@%$VERSION%g +-s%@ACLOCAL@%$ACLOCAL%g +-s%@AUTOCONF@%$AUTOCONF%g +-s%@AUTOMAKE@%$AUTOMAKE%g +-s%@AUTOHEADER@%$AUTOHEADER%g +-s%@MAKEINFO@%$MAKEINFO%g +-s%@SET_MAKE@%$SET_MAKE%g +-s%@PACKAGE_VERSION@%$PACKAGE_VERSION%g +-s%@ENABLE_TIMESYNC@%$ENABLE_TIMESYNC%g +-s%@CC@%$CC%g +-s%@CPP@%$CPP%g +-s%@RANLIB@%$RANLIB%g +-s%@U@%$U%g +-s%@ANSI2KNR@%$ANSI2KNR%g +-s%@ALLOCA@%$ALLOCA%g +-s%@LIBOBJS@%$LIBOBJS%g +-s%@USE_NLS@%$USE_NLS%g +-s%@MSGFMT@%$MSGFMT%g +-s%@GMSGFMT@%$GMSGFMT%g +-s%@XGETTEXT@%$XGETTEXT%g +-s%@GENCAT@%$GENCAT%g +-s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g +-s%@CATALOGS@%$CATALOGS%g +-s%@CATOBJEXT@%$CATOBJEXT%g +-s%@DATADIRNAME@%$DATADIRNAME%g +-s%@GMOFILES@%$GMOFILES%g +-s%@INSTOBJEXT@%$INSTOBJEXT%g +-s%@INTLDEPS@%$INTLDEPS%g +-s%@INTLLIBS@%$INTLLIBS%g +-s%@INTLOBJS@%$INTLOBJS%g +-s%@POFILES@%$POFILES%g +-s%@POSUB@%$POSUB%g +-s%@INCLUDE_LOCALE_H@%$INCLUDE_LOCALE_H%g +-s%@GT_NO@%$GT_NO%g +-s%@GT_YES@%$GT_YES%g +-s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g +-s%@l@%$l%g +- +-CEOF +-EOF +- +-cat >> $CONFIG_STATUS <<\EOF +- +-# Split the substitutions into bite-sized pieces for seds with +-# small command number limits, like on Digital OSF/1 and HP-UX. +-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. +-ac_file=1 # Number of current file. +-ac_beg=1 # First line for current file. +-ac_end=$ac_max_sed_cmds # Line after last line for current file. +-ac_more_lines=: +-ac_sed_cmds="" +-while $ac_more_lines; do +- if test $ac_beg -gt 1; then +- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file +- else +- sed "${ac_end}q" conftest.subs > conftest.s$ac_file ++ ++# as_fn_error STATUS ERROR [LINENO LOG_FD] ++# ---------------------------------------- ++# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are ++# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ++# script with STATUS, using 1 if that was 0. ++as_fn_error () ++{ ++ as_status=$1; test $as_status -eq 0 && as_status=1 ++ if test "$4"; then ++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi +- if test ! -s conftest.s$ac_file; then +- ac_more_lines=false +- rm -f conftest.s$ac_file +- else +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds="sed -f conftest.s$ac_file" +- else +- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" +- fi +- ac_file=`expr $ac_file + 1` +- ac_beg=$ac_end +- ac_end=`expr $ac_end + $ac_max_sed_cmds` +- fi +-done +-if test -z "$ac_sed_cmds"; then +- ac_sed_cmds=cat +-fi +-EOF +- +-cat >> $CONFIG_STATUS <<EOF +- +-CONFIG_FILES=\${CONFIG_FILES-"Makefile intl/Makefile lib/Makefile testsuite/Makefile \ +-man/Makefile po/Makefile.in src/Makefile debian/rules Specfile systype \ +-src/lrzszbug"} +-EOF +-cat >> $CONFIG_STATUS <<\EOF +-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". +- case "$ac_file" in +- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` +- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; +- *) ac_file_in="${ac_file}.in" ;; +- esac ++ $as_echo "$as_me: error: $2" >&2 ++ as_fn_exit $as_status ++} # as_fn_error ++ ++ ++# as_fn_set_status STATUS ++# ----------------------- ++# Set $? to STATUS, without forking. ++as_fn_set_status () ++{ ++ return $1 ++} # as_fn_set_status + +- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. ++# as_fn_exit STATUS ++# ----------------- ++# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. ++as_fn_exit () ++{ ++ set +e ++ as_fn_set_status $1 ++ exit $1 ++} # as_fn_exit ++ ++# as_fn_unset VAR ++# --------------- ++# Portably unset VAR. ++as_fn_unset () ++{ ++ { eval $1=; unset $1;} ++} ++as_unset=as_fn_unset ++# as_fn_append VAR VALUE ++# ---------------------- ++# Append the text in VALUE to the end of the definition contained in VAR. Take ++# advantage of any shell optimizations that allow amortized linear growth over ++# repeated appends, instead of the typical quadratic growth present in naive ++# implementations. ++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : ++ eval 'as_fn_append () ++ { ++ eval $1+=\$2 ++ }' ++else ++ as_fn_append () ++ { ++ eval $1=\$$1\$2 ++ } ++fi # as_fn_append ++ ++# as_fn_arith ARG... ++# ------------------ ++# Perform arithmetic evaluation on the ARGs, and store the result in the ++# global $as_val. Take advantage of shells that can avoid forks. The arguments ++# must be portable across $(()) and expr. ++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : ++ eval 'as_fn_arith () ++ { ++ as_val=$(( $* )) ++ }' ++else ++ as_fn_arith () ++ { ++ as_val=`expr "$@" || test $? -eq 1` ++ } ++fi # as_fn_arith ++ ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in #((((( ++-n*) ++ case `echo 'xy\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ xy) ECHO_C='\c';; ++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ++ ECHO_T=' ';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac + +- # Remove last slash and all that follows it. Not all systems have dirname. +- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` +- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then +- # The file is in a subdirectory. +- test ! -d "$ac_dir" && mkdir "$ac_dir" +- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" +- # A "../" for each directory in $ac_dir_suffix. +- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir 2>/dev/null ++fi ++if (echo >conf$$.file) 2>/dev/null; then ++ if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -pR'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -pR' ++ elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln + else +- ac_dir_suffix= ac_dots= ++ as_ln_s='cp -pR' + fi ++else ++ as_ln_s='cp -pR' ++fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null ++ ++ ++# as_fn_mkdir_p ++# ------------- ++# Create "$as_dir" as a directory, including parents if necessary. ++as_fn_mkdir_p () ++{ + +- case "$ac_given_srcdir" in +- .) srcdir=. +- if test -z "$ac_dots"; then top_srcdir=. +- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; +- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; +- *) # Relative path. +- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" +- top_srcdir="$ac_dots$ac_given_srcdir" ;; ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; + esac ++ test -d "$as_dir" || eval $as_mkdir_p || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" ++ ++ ++} # as_fn_mkdir_p ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p='mkdir -p "$as_dir"' ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false ++fi ++ ++ ++# as_fn_executable_p FILE ++# ----------------------- ++# Test if FILE is an executable regular file. ++as_fn_executable_p () ++{ ++ test -f "$1" && test -x "$1" ++} # as_fn_executable_p ++as_test_x='test -x' ++as_executable_p=as_fn_executable_p ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++exec 6>&1 ++## ----------------------------------- ## ++## Main body of $CONFIG_STATUS script. ## ++## ----------------------------------- ## ++_ASEOF ++test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# Save the log message, to keep $0 and so on meaningful, and to ++# report actual input values of CONFIG_FILES etc. instead of their ++# values after options handling. ++ac_log=" ++This file was extended by $as_me, which was ++generated by GNU Autoconf 2.69. Invocation command line was ++ ++ CONFIG_FILES = $CONFIG_FILES ++ CONFIG_HEADERS = $CONFIG_HEADERS ++ CONFIG_LINKS = $CONFIG_LINKS ++ CONFIG_COMMANDS = $CONFIG_COMMANDS ++ $ $0 $@ + +- case "$ac_given_INSTALL" in +- [/$]*) INSTALL="$ac_given_INSTALL" ;; +- *) INSTALL="$ac_dots$ac_given_INSTALL" ;; ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" ++ ++_ACEOF ++ ++case $ac_config_files in *" ++"*) set x $ac_config_files; shift; ac_config_files=$*;; ++esac ++ ++case $ac_config_headers in *" ++"*) set x $ac_config_headers; shift; ac_config_headers=$*;; ++esac ++ ++ ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++# Files that config.status was made for. ++config_files="$ac_config_files" ++config_headers="$ac_config_headers" ++config_commands="$ac_config_commands" ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++ac_cs_usage="\ ++\`$as_me' instantiates files and other configuration actions ++from templates according to the current configuration. Unless the files ++and actions are specified as TAGs, all are instantiated by default. ++ ++Usage: $0 [OPTION]... [TAG]... ++ ++ -h, --help print this help, then exit ++ -V, --version print version number and configuration settings, then exit ++ --config print configuration, then exit ++ -q, --quiet, --silent ++ do not print progress messages ++ -d, --debug don't remove temporary files ++ --recheck update $as_me by reconfiguring in the same conditions ++ --file=FILE[:TEMPLATE] ++ instantiate the configuration file FILE ++ --header=FILE[:TEMPLATE] ++ instantiate the configuration header FILE ++ ++Configuration files: ++$config_files ++ ++Configuration headers: ++$config_headers ++ ++Configuration commands: ++$config_commands ++ ++Report bugs to the package provider." ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ++ac_cs_version="\\ ++config.status ++configured by $0, generated by GNU Autoconf 2.69, ++ with options \\"\$ac_cs_config\\" ++ ++Copyright (C) 2012 Free Software Foundation, Inc. ++This config.status script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it." ++ ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' ++MKDIR_P='$MKDIR_P' ++AWK='$AWK' ++test -n "\$AWK" || AWK=awk ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# The default lists apply if the user does not specify any file. ++ac_need_defaults=: ++while test $# != 0 ++do ++ case $1 in ++ --*=?*) ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ++ ac_shift=: ++ ;; ++ --*=) ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg= ++ ac_shift=: ++ ;; ++ *) ++ ac_option=$1 ++ ac_optarg=$2 ++ ac_shift=shift ++ ;; + esac + +- echo creating "$ac_file" +- rm -f "$ac_file" +- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." +- case "$ac_file" in +- *Makefile*) ac_comsub="1i\\ +-# $configure_input" ;; +- *) ac_comsub= ;; ++ case $ac_option in ++ # Handling of the options. ++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ++ ac_cs_recheck=: ;; ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ $as_echo "$ac_cs_version"; exit ;; ++ --config | --confi | --conf | --con | --co | --c ) ++ $as_echo "$ac_cs_config"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) ++ debug=: ;; ++ --file | --fil | --fi | --f ) ++ $ac_shift ++ case $ac_optarg in ++ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ '') as_fn_error $? "missing file argument" ;; ++ esac ++ as_fn_append CONFIG_FILES " '$ac_optarg'" ++ ac_need_defaults=false;; ++ --header | --heade | --head | --hea ) ++ $ac_shift ++ case $ac_optarg in ++ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ esac ++ as_fn_append CONFIG_HEADERS " '$ac_optarg'" ++ ac_need_defaults=false;; ++ --he | --h) ++ # Conflict between --help and --header ++ as_fn_error $? "ambiguous option: \`$1' ++Try \`$0 --help' for more information.";; ++ --help | --hel | -h ) ++ $as_echo "$ac_cs_usage"; exit ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil | --si | --s) ++ ac_cs_silent=: ;; ++ ++ # This is an error. ++ -*) as_fn_error $? "unrecognized option: \`$1' ++Try \`$0 --help' for more information." ;; ++ ++ *) as_fn_append ac_config_targets " $1" ++ ac_need_defaults=false ;; ++ + esac ++ shift ++done + +- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` +- sed -e "$ac_comsub +-s%@configure_input@%$configure_input%g +-s%@srcdir@%$srcdir%g +-s%@top_srcdir@%$top_srcdir%g +-s%@INSTALL@%$INSTALL%g +-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +-fi; done +-rm -f conftest.s* ++ac_configure_extra_args= + +-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +-# NAME is the cpp macro being defined and VALUE is the value it is being given. ++if $ac_cs_silent; then ++ exec 6>/dev/null ++ ac_configure_extra_args="$ac_configure_extra_args --silent" ++fi ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++if \$ac_cs_recheck; then ++ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++ shift ++ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 ++ CONFIG_SHELL='$SHELL' ++ export CONFIG_SHELL ++ exec "\$@" ++fi ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++exec 5>>config.log ++{ ++ echo ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ++## Running $as_me. ## ++_ASBOX ++ $as_echo "$ac_log" ++} >&5 ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + # +-# ac_d sets the value in "#define NAME VALUE" lines. +-ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' +-ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' +-ac_dC='\3' +-ac_dD='%g' +-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". +-ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +-ac_uB='\([ ]\)%\1#\2define\3' +-ac_uC=' ' +-ac_uD='\4%g' +-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +-ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +-ac_eB='$%\1#\2define\3' +-ac_eC=' ' +-ac_eD='%g' +- +-if test "${CONFIG_HEADERS+set}" != set; then +-EOF +-cat >> $CONFIG_STATUS <<EOF +- CONFIG_HEADERS="config.h" +-EOF +-cat >> $CONFIG_STATUS <<\EOF +-fi +-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". +- case "$ac_file" in +- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` +- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; +- *) ac_file_in="${ac_file}.in" ;; +- esac ++# INIT-COMMANDS ++# ++AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}" ++# Capture the value of obsolete ALL_LINGUAS because we need it to compute ++ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. ++ OBSOLETE_ALL_LINGUAS="$ALL_LINGUAS" ++ # Capture the value of LINGUAS because we need it to compute CATALOGS. ++ LINGUAS="${LINGUAS-%UNSET%}" + +- echo creating $ac_file + +- rm -f conftest.frag conftest.in conftest.out +- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` +- cat $ac_file_inputs > conftest.in +- +-EOF +- +-# Transform confdefs.h into a sed script conftest.vals that substitutes +-# the proper values into config.h.in to produce config.h. And first: +-# Protect against being on the right side of a sed subst in config.status. +-# Protect against being in an unquoted here document in config.status. +-rm -f conftest.vals +-cat > conftest.hdr <<\EOF +-s/[\\&%]/\\&/g +-s%[\\$`]%\\&%g +-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp +-s%ac_d%ac_u%gp +-s%ac_u%ac_e%gp +-EOF +-sed -n -f conftest.hdr confdefs.h > conftest.vals +-rm -f conftest.hdr +- +-# This sed command replaces #undef with comments. This is necessary, for +-# example, in the case of _POSIX_SOURCE, which is predefined and required +-# on some systems where configure will not decide to define it. +-cat >> conftest.vals <<\EOF +-s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% +-EOF ++_ACEOF + +-# Break up conftest.vals because some shells have a limit on +-# the size of here documents, and old seds have small limits too. ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +-rm -f conftest.tail +-while : ++# Handling of arguments. ++for ac_config_target in $ac_config_targets + do +- ac_lines=`grep -c . conftest.vals` +- # grep -c gives empty output for an empty file on some AIX systems. +- if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi +- # Write a limited-size here document to conftest.frag. +- echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS +- echo 'CEOF +- sed -f conftest.frag conftest.in > conftest.out +- rm -f conftest.in +- mv conftest.out conftest.in +-' >> $CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail +- rm -f conftest.vals +- mv conftest.tail conftest.vals +-done +-rm -f conftest.vals +- +-cat >> $CONFIG_STATUS <<\EOF +- rm -f conftest.frag conftest.h +- echo "/* $ac_file. Generated automatically by configure. */" > conftest.h +- cat conftest.in >> conftest.h +- rm -f conftest.in +- if cmp -s $ac_file conftest.h 2>/dev/null; then +- echo "$ac_file is unchanged" +- rm -f conftest.h ++ case $ac_config_target in ++ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; ++ "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;; ++ "testsuite/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/Makefile" ;; ++ "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;; ++ "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; ++ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; ++ "debian/rules") CONFIG_FILES="$CONFIG_FILES debian/rules" ;; ++ "Specfile") CONFIG_FILES="$CONFIG_FILES Specfile" ;; ++ "systype") CONFIG_FILES="$CONFIG_FILES systype" ;; ++ "src/lrzszbug") CONFIG_FILES="$CONFIG_FILES src/lrzszbug" ;; ++ "default") CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;; ++ ++ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; ++ esac ++done ++ ++ ++# If the user did not use the arguments to specify the items to instantiate, ++# then the envvar interface is used. Set only those that are not. ++# We use the long form for the default assignment because of an extremely ++# bizarre bug on SunOS 4.1.3. ++if $ac_need_defaults; then ++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files ++ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers ++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands ++fi ++ ++# Have a temporary directory for convenience. Make it in the build tree ++# simply because there is no reason against having it here, and in addition, ++# creating and moving files from /tmp can sometimes cause problems. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. ++$debug || ++{ ++ tmp= ac_tmp= ++ trap 'exit_status=$? ++ : "${ac_tmp:=$tmp}" ++ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ++' 0 ++ trap 'as_fn_exit 1' 1 2 13 15 ++} ++# Create a (secure) tmp directory for tmp files. ++ ++{ ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && ++ test -d "$tmp" ++} || ++{ ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") ++} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ++ac_tmp=$tmp ++ ++# Set up the scripts for CONFIG_FILES section. ++# No need to generate them if there are no CONFIG_FILES. ++# This happens for instance with `./config.status config.h'. ++if test -n "$CONFIG_FILES"; then ++ ++ ++ac_cr=`echo X | tr X '\015'` ++# On cygwin, bash can eat \r inside `` if the user requested igncr. ++# But we know of no other shell where ac_cr would be empty at this ++# point, so we can use a bashism as a fallback. ++if test "x$ac_cr" = x; then ++ eval ac_cr=\$\'\\r\' ++fi ++ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` ++if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ++ ac_cs_awk_cr='\\r' ++else ++ ac_cs_awk_cr=$ac_cr ++fi ++ ++echo 'BEGIN {' >"$ac_tmp/subs1.awk" && ++_ACEOF ++ ++ ++{ ++ echo "cat >conf$$subs.awk <<_ACEOF" && ++ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && ++ echo "_ACEOF" ++} >conf$$subs.sh || ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ++ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ . ./conf$$subs.sh || ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ++ ++ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` ++ if test $ac_delim_n = $ac_delim_num; then ++ break ++ elif $ac_last_try; then ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else +- # Remove last slash and all that follows it. Not all systems have dirname. +- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` +- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then +- # The file is in a subdirectory. +- test ! -d "$ac_dir" && mkdir "$ac_dir" +- fi +- rm -f $ac_file +- mv conftest.h $ac_file ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +-fi; done ++done ++rm -f conf$$subs.sh + +-EOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && ++_ACEOF ++sed -n ' ++h ++s/^/S["/; s/!.*/"]=/ ++p ++g ++s/^[^!]*!// ++:repl ++t repl ++s/'"$ac_delim"'$// ++t delim ++:nl ++h ++s/\(.\{148\}\)..*/\1/ ++t more1 ++s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ ++p ++n ++b repl ++:more1 ++s/["\\]/\\&/g; s/^/"/; s/$/"\\/ ++p ++g ++s/.\{148\}// ++t nl ++:delim ++h ++s/\(.\{148\}\)..*/\1/ ++t more2 ++s/["\\]/\\&/g; s/^/"/; s/$/"/ ++p ++b ++:more2 ++s/["\\]/\\&/g; s/^/"/; s/$/"\\/ ++p ++g ++s/.\{148\}// ++t delim ++' <conf$$subs.awk | sed ' ++/^[^""]/{ ++ N ++ s/\n// ++} ++' >>$CONFIG_STATUS || ac_write_fail=1 ++rm -f conf$$subs.awk ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++_ACAWK ++cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && ++ for (key in S) S_is_set[key] = 1 ++ FS = "" + +-cat >> $CONFIG_STATUS <<EOF +-ac_sources="$nls_cv_header_libgt" +-ac_dests="$nls_cv_header_intl" +-EOF +- +-cat >> $CONFIG_STATUS <<\EOF +-srcdir=$ac_given_srcdir +-while test -n "$ac_sources"; do +- set $ac_dests; ac_dest=$1; shift; ac_dests=$* +- set $ac_sources; ac_source=$1; shift; ac_sources=$* +- +- echo "linking $srcdir/$ac_source to $ac_dest" +- +- if test ! -r $srcdir/$ac_source; then +- { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; } +- fi +- rm -f $ac_dest +- +- # Make relative symlinks. +- # Remove last slash and all that follows it. Not all systems have dirname. +- ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'` +- if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then +- # The dest file is in a subdirectory. +- test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir" +- ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`" +- # A "../" for each directory in $ac_dest_dir_suffix. +- ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'` ++} ++{ ++ line = $ 0 ++ nfields = split(line, field, "@") ++ substed = 0 ++ len = length(field[1]) ++ for (i = 2; i < nfields; i++) { ++ key = field[i] ++ keylen = length(key) ++ if (S_is_set[key]) { ++ value = S[key] ++ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) ++ len += length(value) + length(field[++i]) ++ substed = 1 ++ } else ++ len += 1 + keylen ++ } ++ ++ print line ++} ++ ++_ACAWK ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then ++ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" ++else ++ cat ++fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ ++ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 ++_ACEOF ++ ++# VPATH may cause trouble with some makes, so we remove sole $(srcdir), ++# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ ++h ++s/// ++s/^/:/ ++s/[ ]*$/:/ ++s/:\$(srcdir):/:/g ++s/:\${srcdir}:/:/g ++s/:@srcdir@:/:/g ++s/^:*// ++s/:*$// ++x ++s/\(=[ ]*\).*/\1/ ++G ++s/\n// ++s/^[^=]*=[ ]*$// ++}' ++fi ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++fi # test -n "$CONFIG_FILES" ++ ++# Set up the scripts for CONFIG_HEADERS section. ++# No need to generate them if there are no CONFIG_HEADERS. ++# This happens for instance with `./config.status Makefile'. ++if test -n "$CONFIG_HEADERS"; then ++cat >"$ac_tmp/defines.awk" <<\_ACAWK || ++BEGIN { ++_ACEOF ++ ++# Transform confdefs.h into an awk script `defines.awk', embedded as ++# here-document in config.status, that substitutes the proper values into ++# config.h.in to produce config.h. ++ ++# Create a delimiter string that does not exist in confdefs.h, to ease ++# handling of long lines. ++ac_delim='%!_!# ' ++for ac_last_try in false false :; do ++ ac_tt=`sed -n "/$ac_delim/p" confdefs.h` ++ if test -z "$ac_tt"; then ++ break ++ elif $ac_last_try; then ++ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else +- ac_dest_dir_suffix= ac_dots= ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi ++done ++ ++# For the awk script, D is an array of macro values keyed by name, ++# likewise P contains macro parameters if any. Preserve backslash ++# newline sequences. ++ ++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* ++sed -n ' ++s/.\{148\}/&'"$ac_delim"'/g ++t rset ++:rset ++s/^[ ]*#[ ]*define[ ][ ]*/ / ++t def ++d ++:def ++s/\\$// ++t bsnl ++s/["\\]/\\&/g ++s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ ++D["\1"]=" \3"/p ++s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p ++d ++:bsnl ++s/["\\]/\\&/g ++s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ ++D["\1"]=" \3\\\\\\n"\\/p ++t cont ++s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p ++t cont ++d ++:cont ++n ++s/.\{148\}/&'"$ac_delim"'/g ++t clear ++:clear ++s/\\$// ++t bsnlc ++s/["\\]/\\&/g; s/^/"/; s/$/"/p ++d ++:bsnlc ++s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p ++b cont ++' <confdefs.h | sed ' ++s/'"$ac_delim"'/"\\\ ++"/g' >>$CONFIG_STATUS || ac_write_fail=1 ++ ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ for (key in D) D_is_set[key] = 1 ++ FS = "" ++} ++/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { ++ line = \$ 0 ++ split(line, arg, " ") ++ if (arg[1] == "#") { ++ defundef = arg[2] ++ mac1 = arg[3] ++ } else { ++ defundef = substr(arg[1], 2) ++ mac1 = arg[2] ++ } ++ split(mac1, mac2, "(") #) ++ macro = mac2[1] ++ prefix = substr(line, 1, index(line, defundef) - 1) ++ if (D_is_set[macro]) { ++ # Preserve the white space surrounding the "#". ++ print prefix "define", macro P[macro] D[macro] ++ next ++ } else { ++ # Replace #undef with comments. This is necessary, for example, ++ # in the case of _POSIX_SOURCE, which is predefined and required ++ # on some systems where configure will not decide to define it. ++ if (defundef == "undef") { ++ print "/*", prefix defundef, macro, "*/" ++ next ++ } ++ } ++} ++{ print } ++_ACAWK ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 ++fi # test -n "$CONFIG_HEADERS" ++ ++ ++eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" ++shift ++for ac_tag ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift ++ ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$ac_tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; ++ esac ++ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac ++ as_fn_append ac_file_inputs " '$ac_f'" ++ done ++ ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input='Generated from '` ++ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' ++ `' by configure.' ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 ++$as_echo "$as_me: creating $ac_file" >&6;} ++ fi ++ # Neutralize special characters interpreted by sed in replacement strings. ++ case $configure_input in #( ++ *\&* | *\|* | *\\* ) ++ ac_sed_conf_input=`$as_echo "$configure_input" | ++ sed 's/[\\\\&|]/\\\\&/g'`;; #( ++ *) ac_sed_conf_input=$configure_input;; ++ esac ++ ++ case $ac_tag in ++ *:-:* | *:-) cat >"$ac_tmp/stdin" \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; ++ esac ++ ;; ++ esac ++ ++ ac_dir=`$as_dirname -- "$ac_file" || ++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$ac_file" : 'X\(//\)[^/]' \| \ ++ X"$ac_file" : 'X\(//\)$' \| \ ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$ac_file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ as_dir="$ac_dir"; as_fn_mkdir_p ++ ac_builddir=. ++ ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix ++ ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +- case "$srcdir" in +- [/$]*) ac_rel_source="$srcdir/$ac_source" ;; +- *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;; ++ ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # ++ ++ case $INSTALL in ++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; ++ esac ++ ac_MKDIR_P=$MKDIR_P ++ case $MKDIR_P in ++ [\\/$]* | ?:[\\/]* ) ;; ++ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac ++_ACEOF + +- # Make a symlink if possible; otherwise try a hard link. +- if ln -s $ac_rel_source $ac_dest 2>/dev/null || +- ln $srcdir/$ac_source $ac_dest; then : ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= ++ac_sed_dataroot=' ++/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p' ++case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; ++esac ++_ACEOF ++ ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ac_sed_extra="$ac_vpsub ++$extrasub ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++:t ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++s|@configure_input@|$ac_sed_conf_input|;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@top_build_prefix@&$ac_top_build_prefix&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++s&@MKDIR_P@&$ac_MKDIR_P&;t t ++$ac_datarootdir_hack ++" ++eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ ++ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ++ ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ ++ "$ac_tmp/out"`; test -z "$ac_out"; } && ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined" >&5 ++$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined" >&2;} ++ ++ rm -f "$ac_tmp/stdin" ++ case $ac_file in ++ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; ++ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; ++ esac \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ++ ;; ++ :H) ++ # ++ # CONFIG_HEADER ++ # ++ if test x"$ac_file" != x-; then ++ { ++ $as_echo "/* $configure_input */" \ ++ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" ++ } >"$ac_tmp/config.h" \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ++ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 ++$as_echo "$as_me: $ac_file is unchanged" >&6;} ++ else ++ rm -f "$ac_file" ++ mv "$ac_tmp/config.h" "$ac_file" \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ++ fi + else +- { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; } ++ $as_echo "/* $configure_input */" \ ++ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ ++ || as_fn_error $? "could not create -" "$LINENO" 5 + fi ++# Compute "$ac_file"'s index in $config_headers. ++_am_arg="$ac_file" ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $_am_arg | $_am_arg:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac + done +-EOF +-cat >> $CONFIG_STATUS <<EOF ++echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || ++$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$_am_arg" : 'X\(//\)[^/]' \| \ ++ X"$_am_arg" : 'X\(//\)$' \| \ ++ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$_am_arg" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'`/stamp-h$_am_stamp_count ++ ;; + ++ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 ++$as_echo "$as_me: executing $ac_file commands" >&6;} ++ ;; ++ esac + +-EOF +-cat >> $CONFIG_STATUS <<\EOF +-test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h +-sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile; ++ ++ case $ac_file$ac_mode in ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || { ++ # Older Autoconf quotes --file arguments for eval, but not when files ++ # are listed without --file. Let's play safe and only enable the eval ++ # if we detect the quoting. ++ # TODO: see whether this extra hack can be removed once we start ++ # requiring Autoconf 2.70 or later. ++ case $CONFIG_FILES in #( ++ *\'*) : ++ eval set x "$CONFIG_FILES" ;; #( ++ *) : ++ set x $CONFIG_FILES ;; #( ++ *) : ++ ;; ++esac ++ shift ++ # Used to flag and report bootstrapping failures. ++ am_rc=0 ++ for am_mf ++ do ++ # Strip MF so we end up with the name of the file. ++ am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile which includes ++ # dependency-tracking related rules and includes. ++ # Grep'ing the whole file directly is not great: AIX grep has a line ++ # limit of 2048, but all sed's we know have understand at least 4000. ++ sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ ++ || continue ++ am_dirpart=`$as_dirname -- "$am_mf" || ++$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$am_mf" : 'X\(//\)[^/]' \| \ ++ X"$am_mf" : 'X\(//\)$' \| \ ++ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$am_mf" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ am_filepart=`$as_basename -- "$am_mf" || ++$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$am_mf" : 'X\(//\)$' \| \ ++ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X/"$am_mf" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { echo "$as_me:$LINENO: cd "$am_dirpart" \ ++ && sed -e '/# am--include-marker/d' "$am_filepart" \ ++ | $MAKE -f - am--depfiles" >&5 ++ (cd "$am_dirpart" \ ++ && sed -e '/# am--include-marker/d' "$am_filepart" \ ++ | $MAKE -f - am--depfiles) >&5 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } || am_rc=$? ++ done ++ if test $am_rc -ne 0; then ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "Something went wrong bootstrapping makefile fragments ++ for automatic dependency tracking. Try re-running configure with the ++ '--disable-dependency-tracking' option to at least be able to build ++ the package (albeit without support for automatic dependency tracking). ++See \`config.log' for more details" "$LINENO" 5; } ++ fi ++ { am_dirpart=; unset am_dirpart;} ++ { am_filepart=; unset am_filepart;} ++ { am_mf=; unset am_mf;} ++ { am_rc=; unset am_rc;} ++ rm -f conftest-deps.mk ++} ++ ;; ++ "po-directories":C) ++ for ac_file in $CONFIG_FILES; do ++ # Support "outfile[:infile[:infile...]]" ++ case "$ac_file" in ++ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; ++ esac ++ # PO directories have a Makefile.in generated from Makefile.in.in. ++ case "$ac_file" in */Makefile.in) ++ # Adjust a relative srcdir. ++ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` ++ ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` ++ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` ++ # In autoconf-2.13 it is called $ac_given_srcdir. ++ # In autoconf-2.50 it is called $srcdir. ++ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" ++ case "$ac_given_srcdir" in ++ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; ++ /*) top_srcdir="$ac_given_srcdir" ;; ++ *) top_srcdir="$ac_dots$ac_given_srcdir" ;; ++ esac ++ # Treat a directory as a PO directory if and only if it has a ++ # POTFILES.in file. This allows packages to have multiple PO ++ # directories under different names or in different locations. ++ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then ++ rm -f "$ac_dir/POTFILES" ++ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" ++ gt_tab=`printf '\t'` ++ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" ++ POMAKEFILEDEPS="POTFILES.in" ++ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend ++ # on $ac_dir but don't depend on user-specified configuration ++ # parameters. ++ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then ++ # The LINGUAS file contains the set of available languages. ++ if test -n "$OBSOLETE_ALL_LINGUAS"; then ++ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" ++ fi ++ ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` ++ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" ++ else ++ # The set of available languages was given in configure.in. ++ ALL_LINGUAS=$OBSOLETE_ALL_LINGUAS ++ fi ++ # Compute POFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) ++ # Compute UPDATEPOFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) ++ # Compute DUMMYPOFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) ++ # Compute GMOFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) ++ case "$ac_given_srcdir" in ++ .) srcdirpre= ;; ++ *) srcdirpre='$(srcdir)/' ;; ++ esac ++ POFILES= ++ UPDATEPOFILES= ++ DUMMYPOFILES= ++ GMOFILES= ++ for lang in $ALL_LINGUAS; do ++ POFILES="$POFILES $srcdirpre$lang.po" ++ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" ++ DUMMYPOFILES="$DUMMYPOFILES $lang.nop" ++ GMOFILES="$GMOFILES $srcdirpre$lang.gmo" ++ done ++ # CATALOGS depends on both $ac_dir and the user's LINGUAS ++ # environment variable. ++ INST_LINGUAS= ++ if test -n "$ALL_LINGUAS"; then ++ for presentlang in $ALL_LINGUAS; do ++ useit=no ++ if test "%UNSET%" != "$LINGUAS"; then ++ desiredlanguages="$LINGUAS" ++ else ++ desiredlanguages="$ALL_LINGUAS" ++ fi ++ for desiredlang in $desiredlanguages; do ++ # Use the presentlang catalog if desiredlang is ++ # a. equal to presentlang, or ++ # b. a variant of presentlang (because in this case, ++ # presentlang can be used as a fallback for messages ++ # which are not translated in the desiredlang catalog). ++ case "$desiredlang" in ++ "$presentlang"*) useit=yes;; ++ esac ++ done ++ if test $useit = yes; then ++ INST_LINGUAS="$INST_LINGUAS $presentlang" ++ fi ++ done ++ fi ++ CATALOGS= ++ if test -n "$INST_LINGUAS"; then ++ for lang in $INST_LINGUAS; do ++ CATALOGS="$CATALOGS $lang.gmo" ++ done ++ fi ++ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" ++ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" ++ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do ++ if test -f "$f"; then ++ case "$f" in ++ *.orig | *.bak | *~) ;; ++ *) cat "$f" >> "$ac_dir/Makefile" ;; ++ esac ++ fi ++ done ++ fi ++ ;; ++ esac ++ done ;; ++ "default":C) + chmod +x debian/rules; +-test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h +-exit 0 +-EOF +-chmod +x $CONFIG_STATUS +-rm -fr confdefs* $ac_clean_files +-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 ++test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h ;; ++ ++ esac ++done # for ac_tag ++ ++ ++as_fn_exit 0 ++_ACEOF ++ac_clean_files=$ac_clean_files_save ++ ++test $ac_write_fail = 0 || ++ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 ++ ++ ++# configure is writing to config.log, and then calls config.status. ++# config.status does its own redirection, appending to config.log. ++# Unfortunately, on DOS this fails, as config.log is still kept open ++# by configure, so config.status won't be able to write to it; its ++# output is simply discarded. So we exec the FD to /dev/null, ++# effectively closing config.log, so it can be properly (re)opened and ++# appended to by config.status. When coming back to configure, we ++# need to make the FD available again. ++if test "$no_create" != yes; then ++ ac_cs_success=: ++ ac_config_status_args= ++ test "$silent" = yes && ++ ac_config_status_args="$ac_config_status_args --quiet" ++ exec 5>/dev/null ++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false ++ exec 5>>config.log ++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which ++ # would make configure fail if this is the last instruction. ++ $ac_cs_success || as_fn_exit 1 ++fi ++if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 ++$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} ++fi + +diff -uprN clean/lrzsz-0.12.20/configure.in lrzsz-0.12.20/configure.in +--- clean/lrzsz-0.12.20/configure.in 1998-12-30 07:50:07.000000000 +0000 ++++ lrzsz-0.12.20/configure.in 2019-11-25 16:22:37.000000000 +0000 +@@ -92,7 +92,6 @@ AC_PROG_RANLIB + AC_ISC_POSIX + AC_AIX + AC_MINIX +-AM_C_PROTOTYPES + AC_C_CONST + AC_C_INLINE + +@@ -253,18 +252,13 @@ ihave$lookup_facility + fi + + +-AC_SUBST(CFLAGS) +-AC_SUBST(LDFLAGS) + AC_SUBST(LIBS) + +-AM_GNU_GETTEXT ++AM_GNU_GETTEXT([external]) + +-AC_DEFINE_UNQUOTED(LOCALEDIR,"$prefix/$DATADIRNAME") +-AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl) +- +-AC_OUTPUT([Makefile intl/Makefile lib/Makefile testsuite/Makefile \ ++AC_OUTPUT([Makefile lib/Makefile testsuite/Makefile \ + man/Makefile po/Makefile.in src/Makefile debian/rules Specfile systype \ + src/lrzszbug], +-[sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile; ++[ + chmod +x debian/rules; + test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h]) +diff -uprN clean/lrzsz-0.12.20/depcomp lrzsz-0.12.20/depcomp +--- clean/lrzsz-0.12.20/depcomp 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/depcomp 2019-09-30 10:52:39.000000000 +0100 +@@ -0,0 +1,791 @@ ++#! /bin/sh ++# depcomp - compile a program generating dependencies as side-effects ++ ++scriptversion=2016-01-11.22; # UTC ++ ++# Copyright (C) 1999-2017 Free Software Foundation, Inc. ++ ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2, or (at your option) ++# any later version. ++ ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++ ++# You should have received a copy of the GNU General Public License ++# along with this program. If not, see <http://www.gnu.org/licenses/>. ++ ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. ++ ++# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>. ++ ++case $1 in ++ '') ++ echo "$0: No command. Try '$0 --help' for more information." 1>&2 ++ exit 1; ++ ;; ++ -h | --h*) ++ cat <<\EOF ++Usage: depcomp [--help] [--version] PROGRAM [ARGS] ++ ++Run PROGRAMS ARGS to compile a file, generating dependencies ++as side-effects. ++ ++Environment variables: ++ depmode Dependency tracking mode. ++ source Source file read by 'PROGRAMS ARGS'. ++ object Object file output by 'PROGRAMS ARGS'. ++ DEPDIR directory where to store dependencies. ++ depfile Dependency file to output. ++ tmpdepfile Temporary file to use when outputting dependencies. ++ libtool Whether libtool is used (yes/no). ++ ++Report bugs to <bug-automake@gnu.org>. ++EOF ++ exit $? ++ ;; ++ -v | --v*) ++ echo "depcomp $scriptversion" ++ exit $? ++ ;; ++esac ++ ++# Get the directory component of the given path, and save it in the ++# global variables '$dir'. Note that this directory component will ++# be either empty or ending with a '/' character. This is deliberate. ++set_dir_from () ++{ ++ case $1 in ++ */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; ++ *) dir=;; ++ esac ++} ++ ++# Get the suffix-stripped basename of the given path, and save it the ++# global variable '$base'. ++set_base_from () ++{ ++ base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` ++} ++ ++# If no dependency file was actually created by the compiler invocation, ++# we still have to create a dummy depfile, to avoid errors with the ++# Makefile "include basename.Plo" scheme. ++make_dummy_depfile () ++{ ++ echo "#dummy" > "$depfile" ++} ++ ++# Factor out some common post-processing of the generated depfile. ++# Requires the auxiliary global variable '$tmpdepfile' to be set. ++aix_post_process_depfile () ++{ ++ # If the compiler actually managed to produce a dependency file, ++ # post-process it. ++ if test -f "$tmpdepfile"; then ++ # Each line is of the form 'foo.o: dependency.h'. ++ # Do two passes, one to just change these to ++ # $object: dependency.h ++ # and one to simply output ++ # dependency.h: ++ # which is needed to avoid the deleted-header problem. ++ { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" ++ sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" ++ } > "$depfile" ++ rm -f "$tmpdepfile" ++ else ++ make_dummy_depfile ++ fi ++} ++ ++# A tabulation character. ++tab=' ' ++# A newline character. ++nl=' ++' ++# Character ranges might be problematic outside the C locale. ++# These definitions help. ++upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ ++lower=abcdefghijklmnopqrstuvwxyz ++digits=0123456789 ++alpha=${upper}${lower} ++ ++if test -z "$depmode" || test -z "$source" || test -z "$object"; then ++ echo "depcomp: Variables source, object and depmode must be set" 1>&2 ++ exit 1 ++fi ++ ++# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. ++depfile=${depfile-`echo "$object" | ++ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} ++tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} ++ ++rm -f "$tmpdepfile" ++ ++# Avoid interferences from the environment. ++gccflag= dashmflag= ++ ++# Some modes work just like other modes, but use different flags. We ++# parameterize here, but still list the modes in the big case below, ++# to make depend.m4 easier to write. Note that we *cannot* use a case ++# here, because this file can only contain one case statement. ++if test "$depmode" = hp; then ++ # HP compiler uses -M and no extra arg. ++ gccflag=-M ++ depmode=gcc ++fi ++ ++if test "$depmode" = dashXmstdout; then ++ # This is just like dashmstdout with a different argument. ++ dashmflag=-xM ++ depmode=dashmstdout ++fi ++ ++cygpath_u="cygpath -u -f -" ++if test "$depmode" = msvcmsys; then ++ # This is just like msvisualcpp but w/o cygpath translation. ++ # Just convert the backslash-escaped backslashes to single forward ++ # slashes to satisfy depend.m4 ++ cygpath_u='sed s,\\\\,/,g' ++ depmode=msvisualcpp ++fi ++ ++if test "$depmode" = msvc7msys; then ++ # This is just like msvc7 but w/o cygpath translation. ++ # Just convert the backslash-escaped backslashes to single forward ++ # slashes to satisfy depend.m4 ++ cygpath_u='sed s,\\\\,/,g' ++ depmode=msvc7 ++fi ++ ++if test "$depmode" = xlc; then ++ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. ++ gccflag=-qmakedep=gcc,-MF ++ depmode=gcc ++fi ++ ++case "$depmode" in ++gcc3) ++## gcc 3 implements dependency tracking that does exactly what ++## we want. Yay! Note: for some reason libtool 1.4 doesn't like ++## it if -MD -MP comes after the -MF stuff. Hmm. ++## Unfortunately, FreeBSD c89 acceptance of flags depends upon ++## the command line argument order; so add the flags where they ++## appear in depend2.am. Note that the slowdown incurred here ++## affects only configure: in makefiles, %FASTDEP% shortcuts this. ++ for arg ++ do ++ case $arg in ++ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; ++ *) set fnord "$@" "$arg" ;; ++ esac ++ shift # fnord ++ shift # $arg ++ done ++ "$@" ++ stat=$? ++ if test $stat -ne 0; then ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ mv "$tmpdepfile" "$depfile" ++ ;; ++ ++gcc) ++## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. ++## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. ++## (see the conditional assignment to $gccflag above). ++## There are various ways to get dependency output from gcc. Here's ++## why we pick this rather obscure method: ++## - Don't want to use -MD because we'd like the dependencies to end ++## up in a subdir. Having to rename by hand is ugly. ++## (We might end up doing this anyway to support other compilers.) ++## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ++## -MM, not -M (despite what the docs say). Also, it might not be ++## supported by the other compilers which use the 'gcc' depmode. ++## - Using -M directly means running the compiler twice (even worse ++## than renaming). ++ if test -z "$gccflag"; then ++ gccflag=-MD, ++ fi ++ "$@" -Wp,"$gccflag$tmpdepfile" ++ stat=$? ++ if test $stat -ne 0; then ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ rm -f "$depfile" ++ echo "$object : \\" > "$depfile" ++ # The second -e expression handles DOS-style file names with drive ++ # letters. ++ sed -e 's/^[^:]*: / /' \ ++ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ++## This next piece of magic avoids the "deleted header file" problem. ++## The problem is that when a header file which appears in a .P file ++## is deleted, the dependency causes make to die (because there is ++## typically no way to rebuild the header). We avoid this by adding ++## dummy dependencies for each header file. Too bad gcc doesn't do ++## this for us directly. ++## Some versions of gcc put a space before the ':'. On the theory ++## that the space means something, we add a space to the output as ++## well. hp depmode also adds that space, but also prefixes the VPATH ++## to the object. Take care to not repeat it in the output. ++## Some versions of the HPUX 10.20 sed can't process this invocation ++## correctly. Breaking it into two sed invocations is a workaround. ++ tr ' ' "$nl" < "$tmpdepfile" \ ++ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ ++ | sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++hp) ++ # This case exists only to let depend.m4 do its work. It works by ++ # looking at the text of this script. This case will never be run, ++ # since it is checked for above. ++ exit 1 ++ ;; ++ ++sgi) ++ if test "$libtool" = yes; then ++ "$@" "-Wp,-MDupdate,$tmpdepfile" ++ else ++ "$@" -MDupdate "$tmpdepfile" ++ fi ++ stat=$? ++ if test $stat -ne 0; then ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ rm -f "$depfile" ++ ++ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files ++ echo "$object : \\" > "$depfile" ++ # Clip off the initial element (the dependent). Don't try to be ++ # clever and replace this with sed code, as IRIX sed won't handle ++ # lines with more than a fixed number of characters (4096 in ++ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; ++ # the IRIX cc adds comments like '#:fec' to the end of the ++ # dependency line. ++ tr ' ' "$nl" < "$tmpdepfile" \ ++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ ++ | tr "$nl" ' ' >> "$depfile" ++ echo >> "$depfile" ++ # The second pass generates a dummy entry for each header file. ++ tr ' ' "$nl" < "$tmpdepfile" \ ++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ ++ >> "$depfile" ++ else ++ make_dummy_depfile ++ fi ++ rm -f "$tmpdepfile" ++ ;; ++ ++xlc) ++ # This case exists only to let depend.m4 do its work. It works by ++ # looking at the text of this script. This case will never be run, ++ # since it is checked for above. ++ exit 1 ++ ;; ++ ++aix) ++ # The C for AIX Compiler uses -M and outputs the dependencies ++ # in a .u file. In older versions, this file always lives in the ++ # current directory. Also, the AIX compiler puts '$object:' at the ++ # start of each line; $object doesn't have directory information. ++ # Version 6 uses the directory in both cases. ++ set_dir_from "$object" ++ set_base_from "$object" ++ if test "$libtool" = yes; then ++ tmpdepfile1=$dir$base.u ++ tmpdepfile2=$base.u ++ tmpdepfile3=$dir.libs/$base.u ++ "$@" -Wc,-M ++ else ++ tmpdepfile1=$dir$base.u ++ tmpdepfile2=$dir$base.u ++ tmpdepfile3=$dir$base.u ++ "$@" -M ++ fi ++ stat=$? ++ if test $stat -ne 0; then ++ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" ++ exit $stat ++ fi ++ ++ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" ++ do ++ test -f "$tmpdepfile" && break ++ done ++ aix_post_process_depfile ++ ;; ++ ++tcc) ++ # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 ++ # FIXME: That version still under development at the moment of writing. ++ # Make that this statement remains true also for stable, released ++ # versions. ++ # It will wrap lines (doesn't matter whether long or short) with a ++ # trailing '\', as in: ++ # ++ # foo.o : \ ++ # foo.c \ ++ # foo.h \ ++ # ++ # It will put a trailing '\' even on the last line, and will use leading ++ # spaces rather than leading tabs (at least since its commit 0394caf7 ++ # "Emit spaces for -MD"). ++ "$@" -MD -MF "$tmpdepfile" ++ stat=$? ++ if test $stat -ne 0; then ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ rm -f "$depfile" ++ # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. ++ # We have to change lines of the first kind to '$object: \'. ++ sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" ++ # And for each line of the second kind, we have to emit a 'dep.h:' ++ # dummy dependency, to avoid the deleted-header problem. ++ sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++## The order of this option in the case statement is important, since the ++## shell code in configure will try each of these formats in the order ++## listed in this file. A plain '-MD' option would be understood by many ++## compilers, so we must ensure this comes after the gcc and icc options. ++pgcc) ++ # Portland's C compiler understands '-MD'. ++ # Will always output deps to 'file.d' where file is the root name of the ++ # source file under compilation, even if file resides in a subdirectory. ++ # The object file name does not affect the name of the '.d' file. ++ # pgcc 10.2 will output ++ # foo.o: sub/foo.c sub/foo.h ++ # and will wrap long lines using '\' : ++ # foo.o: sub/foo.c ... \ ++ # sub/foo.h ... \ ++ # ... ++ set_dir_from "$object" ++ # Use the source, not the object, to determine the base name, since ++ # that's sadly what pgcc will do too. ++ set_base_from "$source" ++ tmpdepfile=$base.d ++ ++ # For projects that build the same source file twice into different object ++ # files, the pgcc approach of using the *source* file root name can cause ++ # problems in parallel builds. Use a locking strategy to avoid stomping on ++ # the same $tmpdepfile. ++ lockdir=$base.d-lock ++ trap " ++ echo '$0: caught signal, cleaning up...' >&2 ++ rmdir '$lockdir' ++ exit 1 ++ " 1 2 13 15 ++ numtries=100 ++ i=$numtries ++ while test $i -gt 0; do ++ # mkdir is a portable test-and-set. ++ if mkdir "$lockdir" 2>/dev/null; then ++ # This process acquired the lock. ++ "$@" -MD ++ stat=$? ++ # Release the lock. ++ rmdir "$lockdir" ++ break ++ else ++ # If the lock is being held by a different process, wait ++ # until the winning process is done or we timeout. ++ while test -d "$lockdir" && test $i -gt 0; do ++ sleep 1 ++ i=`expr $i - 1` ++ done ++ fi ++ i=`expr $i - 1` ++ done ++ trap - 1 2 13 15 ++ if test $i -le 0; then ++ echo "$0: failed to acquire lock after $numtries attempts" >&2 ++ echo "$0: check lockdir '$lockdir'" >&2 ++ exit 1 ++ fi ++ ++ if test $stat -ne 0; then ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ rm -f "$depfile" ++ # Each line is of the form `foo.o: dependent.h', ++ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. ++ # Do two passes, one to just change these to ++ # `$object: dependent.h' and one to simply `dependent.h:'. ++ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" ++ # Some versions of the HPUX 10.20 sed can't process this invocation ++ # correctly. Breaking it into two sed invocations is a workaround. ++ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ ++ | sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++hp2) ++ # The "hp" stanza above does not work with aCC (C++) and HP's ia64 ++ # compilers, which have integrated preprocessors. The correct option ++ # to use with these is +Maked; it writes dependencies to a file named ++ # 'foo.d', which lands next to the object file, wherever that ++ # happens to be. ++ # Much of this is similar to the tru64 case; see comments there. ++ set_dir_from "$object" ++ set_base_from "$object" ++ if test "$libtool" = yes; then ++ tmpdepfile1=$dir$base.d ++ tmpdepfile2=$dir.libs/$base.d ++ "$@" -Wc,+Maked ++ else ++ tmpdepfile1=$dir$base.d ++ tmpdepfile2=$dir$base.d ++ "$@" +Maked ++ fi ++ stat=$? ++ if test $stat -ne 0; then ++ rm -f "$tmpdepfile1" "$tmpdepfile2" ++ exit $stat ++ fi ++ ++ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" ++ do ++ test -f "$tmpdepfile" && break ++ done ++ if test -f "$tmpdepfile"; then ++ sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" ++ # Add 'dependent.h:' lines. ++ sed -ne '2,${ ++ s/^ *// ++ s/ \\*$// ++ s/$/:/ ++ p ++ }' "$tmpdepfile" >> "$depfile" ++ else ++ make_dummy_depfile ++ fi ++ rm -f "$tmpdepfile" "$tmpdepfile2" ++ ;; ++ ++tru64) ++ # The Tru64 compiler uses -MD to generate dependencies as a side ++ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. ++ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put ++ # dependencies in 'foo.d' instead, so we check for that too. ++ # Subdirectories are respected. ++ set_dir_from "$object" ++ set_base_from "$object" ++ ++ if test "$libtool" = yes; then ++ # Libtool generates 2 separate objects for the 2 libraries. These ++ # two compilations output dependencies in $dir.libs/$base.o.d and ++ # in $dir$base.o.d. We have to check for both files, because ++ # one of the two compilations can be disabled. We should prefer ++ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is ++ # automatically cleaned when .libs/ is deleted, while ignoring ++ # the former would cause a distcleancheck panic. ++ tmpdepfile1=$dir$base.o.d # libtool 1.5 ++ tmpdepfile2=$dir.libs/$base.o.d # Likewise. ++ tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 ++ "$@" -Wc,-MD ++ else ++ tmpdepfile1=$dir$base.d ++ tmpdepfile2=$dir$base.d ++ tmpdepfile3=$dir$base.d ++ "$@" -MD ++ fi ++ ++ stat=$? ++ if test $stat -ne 0; then ++ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" ++ exit $stat ++ fi ++ ++ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" ++ do ++ test -f "$tmpdepfile" && break ++ done ++ # Same post-processing that is required for AIX mode. ++ aix_post_process_depfile ++ ;; ++ ++msvc7) ++ if test "$libtool" = yes; then ++ showIncludes=-Wc,-showIncludes ++ else ++ showIncludes=-showIncludes ++ fi ++ "$@" $showIncludes > "$tmpdepfile" ++ stat=$? ++ grep -v '^Note: including file: ' "$tmpdepfile" ++ if test $stat -ne 0; then ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ rm -f "$depfile" ++ echo "$object : \\" > "$depfile" ++ # The first sed program below extracts the file names and escapes ++ # backslashes for cygpath. The second sed program outputs the file ++ # name when reading, but also accumulates all include files in the ++ # hold buffer in order to output them again at the end. This only ++ # works with sed implementations that can handle large buffers. ++ sed < "$tmpdepfile" -n ' ++/^Note: including file: *\(.*\)/ { ++ s//\1/ ++ s/\\/\\\\/g ++ p ++}' | $cygpath_u | sort -u | sed -n ' ++s/ /\\ /g ++s/\(.*\)/'"$tab"'\1 \\/p ++s/.\(.*\) \\/\1:/ ++H ++$ { ++ s/.*/'"$tab"'/ ++ G ++ p ++}' >> "$depfile" ++ echo >> "$depfile" # make sure the fragment doesn't end with a backslash ++ rm -f "$tmpdepfile" ++ ;; ++ ++msvc7msys) ++ # This case exists only to let depend.m4 do its work. It works by ++ # looking at the text of this script. This case will never be run, ++ # since it is checked for above. ++ exit 1 ++ ;; ++ ++#nosideeffect) ++ # This comment above is used by automake to tell side-effect ++ # dependency tracking mechanisms from slower ones. ++ ++dashmstdout) ++ # Important note: in order to support this mode, a compiler *must* ++ # always write the preprocessed file to stdout, regardless of -o. ++ "$@" || exit $? ++ ++ # Remove the call to Libtool. ++ if test "$libtool" = yes; then ++ while test "X$1" != 'X--mode=compile'; do ++ shift ++ done ++ shift ++ fi ++ ++ # Remove '-o $object'. ++ IFS=" " ++ for arg ++ do ++ case $arg in ++ -o) ++ shift ++ ;; ++ $object) ++ shift ++ ;; ++ *) ++ set fnord "$@" "$arg" ++ shift # fnord ++ shift # $arg ++ ;; ++ esac ++ done ++ ++ test -z "$dashmflag" && dashmflag=-M ++ # Require at least two characters before searching for ':' ++ # in the target name. This is to cope with DOS-style filenames: ++ # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. ++ "$@" $dashmflag | ++ sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" ++ rm -f "$depfile" ++ cat < "$tmpdepfile" > "$depfile" ++ # Some versions of the HPUX 10.20 sed can't process this sed invocation ++ # correctly. Breaking it into two sed invocations is a workaround. ++ tr ' ' "$nl" < "$tmpdepfile" \ ++ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ ++ | sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++dashXmstdout) ++ # This case only exists to satisfy depend.m4. It is never actually ++ # run, as this mode is specially recognized in the preamble. ++ exit 1 ++ ;; ++ ++makedepend) ++ "$@" || exit $? ++ # Remove any Libtool call ++ if test "$libtool" = yes; then ++ while test "X$1" != 'X--mode=compile'; do ++ shift ++ done ++ shift ++ fi ++ # X makedepend ++ shift ++ cleared=no eat=no ++ for arg ++ do ++ case $cleared in ++ no) ++ set ""; shift ++ cleared=yes ;; ++ esac ++ if test $eat = yes; then ++ eat=no ++ continue ++ fi ++ case "$arg" in ++ -D*|-I*) ++ set fnord "$@" "$arg"; shift ;; ++ # Strip any option that makedepend may not understand. Remove ++ # the object too, otherwise makedepend will parse it as a source file. ++ -arch) ++ eat=yes ;; ++ -*|$object) ++ ;; ++ *) ++ set fnord "$@" "$arg"; shift ;; ++ esac ++ done ++ obj_suffix=`echo "$object" | sed 's/^.*\././'` ++ touch "$tmpdepfile" ++ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" ++ rm -f "$depfile" ++ # makedepend may prepend the VPATH from the source file name to the object. ++ # No need to regex-escape $object, excess matching of '.' is harmless. ++ sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" ++ # Some versions of the HPUX 10.20 sed can't process the last invocation ++ # correctly. Breaking it into two sed invocations is a workaround. ++ sed '1,2d' "$tmpdepfile" \ ++ | tr ' ' "$nl" \ ++ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ ++ | sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" "$tmpdepfile".bak ++ ;; ++ ++cpp) ++ # Important note: in order to support this mode, a compiler *must* ++ # always write the preprocessed file to stdout. ++ "$@" || exit $? ++ ++ # Remove the call to Libtool. ++ if test "$libtool" = yes; then ++ while test "X$1" != 'X--mode=compile'; do ++ shift ++ done ++ shift ++ fi ++ ++ # Remove '-o $object'. ++ IFS=" " ++ for arg ++ do ++ case $arg in ++ -o) ++ shift ++ ;; ++ $object) ++ shift ++ ;; ++ *) ++ set fnord "$@" "$arg" ++ shift # fnord ++ shift # $arg ++ ;; ++ esac ++ done ++ ++ "$@" -E \ ++ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ ++ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ ++ | sed '$ s: \\$::' > "$tmpdepfile" ++ rm -f "$depfile" ++ echo "$object : \\" > "$depfile" ++ cat < "$tmpdepfile" >> "$depfile" ++ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++msvisualcpp) ++ # Important note: in order to support this mode, a compiler *must* ++ # always write the preprocessed file to stdout. ++ "$@" || exit $? ++ ++ # Remove the call to Libtool. ++ if test "$libtool" = yes; then ++ while test "X$1" != 'X--mode=compile'; do ++ shift ++ done ++ shift ++ fi ++ ++ IFS=" " ++ for arg ++ do ++ case "$arg" in ++ -o) ++ shift ++ ;; ++ $object) ++ shift ++ ;; ++ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") ++ set fnord "$@" ++ shift ++ shift ++ ;; ++ *) ++ set fnord "$@" "$arg" ++ shift ++ shift ++ ;; ++ esac ++ done ++ "$@" -E 2>/dev/null | ++ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" ++ rm -f "$depfile" ++ echo "$object : \\" > "$depfile" ++ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" ++ echo "$tab" >> "$depfile" ++ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++msvcmsys) ++ # This case exists only to let depend.m4 do its work. It works by ++ # looking at the text of this script. This case will never be run, ++ # since it is checked for above. ++ exit 1 ++ ;; ++ ++none) ++ exec "$@" ++ ;; ++ ++*) ++ echo "Unknown depmode $depmode" 1>&2 ++ exit 1 ++ ;; ++esac ++ ++exit 0 ++ ++# Local Variables: ++# mode: shell-script ++# sh-indentation: 2 ++# eval: (add-hook 'write-file-hooks 'time-stamp) ++# time-stamp-start: "scriptversion=" ++# time-stamp-format: "%:y-%02m-%02d.%02H" ++# time-stamp-time-zone: "UTC0" ++# time-stamp-end: "; # UTC" ++# End: +diff -uprN clean/lrzsz-0.12.20/intl/bindtextdom.c lrzsz-0.12.20/intl/bindtextdom.c +--- clean/lrzsz-0.12.20/intl/bindtextdom.c 1998-04-26 14:22:36.000000000 +0100 ++++ lrzsz-0.12.20/intl/bindtextdom.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,199 +0,0 @@ +-/* Implementation of the bindtextdomain(3) function +- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc. +- +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2, or (at your option) +- any later version. +- +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. +- +- You should have received a copy of the GNU General Public License +- along with this program; if not, write to the Free Software Foundation, +- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +- +-#ifdef HAVE_CONFIG_H +-# include <config.h> +-#endif +- +-#if defined STDC_HEADERS || defined _LIBC +-# include <stdlib.h> +-#else +-# ifdef HAVE_MALLOC_H +-# include <malloc.h> +-# else +-void free (); +-# endif +-#endif +- +-#if defined HAVE_STRING_H || defined _LIBC +-# include <string.h> +-#else +-# include <strings.h> +-# ifndef memcpy +-# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num) +-# endif +-#endif +- +-#ifdef _LIBC +-# include <libintl.h> +-#else +-# include "libgettext.h" +-#endif +-#include "gettext.h" +-#include "gettextP.h" +- +-/* @@ end of prolog @@ */ +- +-/* Contains the default location of the message catalogs. */ +-extern const char _nl_default_dirname[]; +- +-/* List with bindings of specific domains. */ +-extern struct binding *_nl_domain_bindings; +- +- +-/* Names for the libintl functions are a problem. They must not clash +- with existing names and they should follow ANSI C. But this source +- code is also used in GNU C Library where the names have a __ +- prefix. So we have to make a difference here. */ +-#ifdef _LIBC +-# define BINDTEXTDOMAIN __bindtextdomain +-# define strdup(str) __strdup (str) +-#else +-# define BINDTEXTDOMAIN bindtextdomain__ +-#endif +- +-/* Specify that the DOMAINNAME message catalog will be found +- in DIRNAME rather than in the system locale data base. */ +-char * +-BINDTEXTDOMAIN (domainname, dirname) +- const char *domainname; +- const char *dirname; +-{ +- struct binding *binding; +- +- /* Some sanity checks. */ +- if (domainname == NULL || domainname[0] == '\0') +- return NULL; +- +- for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next) +- { +- int compare = strcmp (domainname, binding->domainname); +- if (compare == 0) +- /* We found it! */ +- break; +- if (compare < 0) +- { +- /* It is not in the list. */ +- binding = NULL; +- break; +- } +- } +- +- if (dirname == NULL) +- /* The current binding has be to returned. */ +- return binding == NULL ? (char *) _nl_default_dirname : binding->dirname; +- +- if (binding != NULL) +- { +- /* The domain is already bound. If the new value and the old +- one are equal we simply do nothing. Otherwise replace the +- old binding. */ +- if (strcmp (dirname, binding->dirname) != 0) +- { +- char *new_dirname; +- +- if (strcmp (dirname, _nl_default_dirname) == 0) +- new_dirname = (char *) _nl_default_dirname; +- else +- { +-#if defined _LIBC || defined HAVE_STRDUP +- new_dirname = strdup (dirname); +- if (new_dirname == NULL) +- return NULL; +-#else +- size_t len = strlen (dirname) + 1; +- new_dirname = (char *) malloc (len); +- if (new_dirname == NULL) +- return NULL; +- +- memcpy (new_dirname, dirname, len); +-#endif +- } +- +- if (binding->dirname != _nl_default_dirname) +- free (binding->dirname); +- +- binding->dirname = new_dirname; +- } +- } +- else +- { +- /* We have to create a new binding. */ +- size_t len; +- struct binding *new_binding = +- (struct binding *) malloc (sizeof (*new_binding)); +- +- if (new_binding == NULL) +- return NULL; +- +-#if defined _LIBC || defined HAVE_STRDUP +- new_binding->domainname = strdup (domainname); +- if (new_binding->domainname == NULL) +- return NULL; +-#else +- len = strlen (domainname) + 1; +- new_binding->domainname = (char *) malloc (len); +- if (new_binding->domainname == NULL) +- return NULL; +- memcpy (new_binding->domainname, domainname, len); +-#endif +- +- if (strcmp (dirname, _nl_default_dirname) == 0) +- new_binding->dirname = (char *) _nl_default_dirname; +- else +- { +-#if defined _LIBC || defined HAVE_STRDUP +- new_binding->dirname = strdup (dirname); +- if (new_binding->dirname == NULL) +- return NULL; +-#else +- len = strlen (dirname) + 1; +- new_binding->dirname = (char *) malloc (len); +- if (new_binding->dirname == NULL) +- return NULL; +- memcpy (new_binding->dirname, dirname, len); +-#endif +- } +- +- /* Now enqueue it. */ +- if (_nl_domain_bindings == NULL +- || strcmp (domainname, _nl_domain_bindings->domainname) < 0) +- { +- new_binding->next = _nl_domain_bindings; +- _nl_domain_bindings = new_binding; +- } +- else +- { +- binding = _nl_domain_bindings; +- while (binding->next != NULL +- && strcmp (domainname, binding->next->domainname) > 0) +- binding = binding->next; +- +- new_binding->next = binding->next; +- binding->next = new_binding; +- } +- +- binding = new_binding; +- } +- +- return binding->dirname; +-} +- +-#ifdef _LIBC +-/* Alias for function name in GNU C Library. */ +-weak_alias (__bindtextdomain, bindtextdomain); +-#endif +diff -uprN clean/lrzsz-0.12.20/intl/cat-compat.c lrzsz-0.12.20/intl/cat-compat.c +--- clean/lrzsz-0.12.20/intl/cat-compat.c 1998-04-26 14:22:37.000000000 +0100 ++++ lrzsz-0.12.20/intl/cat-compat.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,262 +0,0 @@ +-/* Compatibility code for gettext-using-catgets interface. +- Copyright (C) 1995, 1997 Free Software Foundation, Inc. +- +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2, or (at your option) +- any later version. +- +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. +- +- You should have received a copy of the GNU General Public License +- along with this program; if not, write to the Free Software Foundation, +- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +- +-#ifdef HAVE_CONFIG_H +-# include <config.h> +-#endif +- +-#include <stdio.h> +- +-#ifdef STDC_HEADERS +-# include <stdlib.h> +-# include <string.h> +-#else +-char *getenv (); +-# ifdef HAVE_MALLOC_H +-# include <malloc.h> +-# endif +-#endif +- +-#ifdef HAVE_NL_TYPES_H +-# include <nl_types.h> +-#endif +- +-#include "libgettext.h" +- +-/* @@ end of prolog @@ */ +- +-/* XPG3 defines the result of `setlocale (category, NULL)' as: +- ``Directs `setlocale()' to query `category' and return the current +- setting of `local'.'' +- However it does not specify the exact format. And even worse: POSIX +- defines this not at all. So we can use this feature only on selected +- system (e.g. those using GNU C Library). */ +-#ifdef _LIBC +-# define HAVE_LOCALE_NULL +-#endif +- +-/* The catalog descriptor. */ +-static nl_catd catalog = (nl_catd) -1; +- +-/* Name of the default catalog. */ +-static const char default_catalog_name[] = "messages"; +- +-/* Name of currently used catalog. */ +-static const char *catalog_name = default_catalog_name; +- +-/* Get ID for given string. If not found return -1. */ +-static int msg_to_cat_id PARAMS ((const char *msg)); +- +-/* Substitution for systems lacking this function in their C library. */ +-#if !_LIBC && !HAVE_STPCPY +-static char *stpcpy PARAMS ((char *dest, const char *src)); +-#endif +- +- +-/* Set currently used domain/catalog. */ +-char * +-textdomain (domainname) +- const char *domainname; +-{ +- nl_catd new_catalog; +- char *new_name; +- size_t new_name_len; +- char *lang; +- +-#if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES \ +- && defined HAVE_LOCALE_NULL +- lang = setlocale (LC_MESSAGES, NULL); +-#else +- lang = getenv ("LC_ALL"); +- if (lang == NULL || lang[0] == '\0') +- { +- lang = getenv ("LC_MESSAGES"); +- if (lang == NULL || lang[0] == '\0') +- lang = getenv ("LANG"); +- } +-#endif +- if (lang == NULL || lang[0] == '\0') +- lang = "C"; +- +- /* See whether name of currently used domain is asked. */ +- if (domainname == NULL) +- return (char *) catalog_name; +- +- if (domainname[0] == '\0') +- domainname = default_catalog_name; +- +- /* Compute length of added path element. */ +- new_name_len = sizeof (LOCALEDIR) - 1 + 1 + strlen (lang) +- + sizeof ("/LC_MESSAGES/") - 1 + sizeof (PACKAGE) - 1 +- + sizeof (".cat"); +- +- new_name = (char *) malloc (new_name_len); +- if (new_name == NULL) +- return NULL; +- +- strcpy (new_name, PACKAGE); +- new_catalog = catopen (new_name, 0); +- +- if (new_catalog == (nl_catd) -1) +- { +- /* NLSPATH search didn't work, try absolute path */ +- sprintf (new_name, "%s/%s/LC_MESSAGES/%s.cat", LOCALEDIR, lang, +- PACKAGE); +- new_catalog = catopen (new_name, 0); +- +- if (new_catalog == (nl_catd) -1) +- { +- free (new_name); +- return (char *) catalog_name; +- } +- } +- +- /* Close old catalog. */ +- if (catalog != (nl_catd) -1) +- catclose (catalog); +- if (catalog_name != default_catalog_name) +- free ((char *) catalog_name); +- +- catalog = new_catalog; +- catalog_name = new_name; +- +- return (char *) catalog_name; +-} +- +-char * +-bindtextdomain (domainname, dirname) +- const char *domainname; +- const char *dirname; +-{ +-#if HAVE_SETENV || HAVE_PUTENV +- char *old_val, *new_val, *cp; +- size_t new_val_len; +- +- /* This does not make much sense here but to be compatible do it. */ +- if (domainname == NULL) +- return NULL; +- +- /* Compute length of added path element. If we use setenv we don't need +- the first byts for NLSPATH=, but why complicate the code for this +- peanuts. */ +- new_val_len = sizeof ("NLSPATH=") - 1 + strlen (dirname) +- + sizeof ("/%L/LC_MESSAGES/%N.cat"); +- +- old_val = getenv ("NLSPATH"); +- if (old_val == NULL || old_val[0] == '\0') +- { +- old_val = NULL; +- new_val_len += 1 + sizeof (LOCALEDIR) - 1 +- + sizeof ("/%L/LC_MESSAGES/%N.cat"); +- } +- else +- new_val_len += strlen (old_val); +- +- new_val = (char *) malloc (new_val_len); +- if (new_val == NULL) +- return NULL; +- +-# if HAVE_SETENV +- cp = new_val; +-# else +- cp = stpcpy (new_val, "NLSPATH="); +-# endif +- +- cp = stpcpy (cp, dirname); +- cp = stpcpy (cp, "/%L/LC_MESSAGES/%N.cat:"); +- +- if (old_val == NULL) +- { +-# if __STDC__ +- stpcpy (cp, LOCALEDIR "/%L/LC_MESSAGES/%N.cat"); +-# else +- +- cp = stpcpy (cp, LOCALEDIR); +- stpcpy (cp, "/%L/LC_MESSAGES/%N.cat"); +-# endif +- } +- else +- stpcpy (cp, old_val); +- +-# if HAVE_SETENV +- setenv ("NLSPATH", new_val, 1); +- free (new_val); +-# else +- putenv (new_val); +- /* Do *not* free the environment entry we just entered. It is used +- from now on. */ +-# endif +- +-#endif +- +- return (char *) domainname; +-} +- +-#undef gettext +-char * +-gettext (msg) +- const char *msg; +-{ +- int msgid; +- +- if (msg == NULL || catalog == (nl_catd) -1) +- return (char *) msg; +- +- /* Get the message from the catalog. We always use set number 1. +- The message ID is computed by the function `msg_to_cat_id' +- which works on the table generated by `po-to-tbl'. */ +- msgid = msg_to_cat_id (msg); +- if (msgid == -1) +- return (char *) msg; +- +- return catgets (catalog, 1, msgid, (char *) msg); +-} +- +-/* Look through the table `_msg_tbl' which has `_msg_tbl_length' entries +- for the one equal to msg. If it is found return the ID. In case when +- the string is not found return -1. */ +-static int +-msg_to_cat_id (msg) +- const char *msg; +-{ +- int cnt; +- +- for (cnt = 0; cnt < _msg_tbl_length; ++cnt) +- if (strcmp (msg, _msg_tbl[cnt]._msg) == 0) +- return _msg_tbl[cnt]._msg_number; +- +- return -1; +-} +- +- +-/* @@ begin of epilog @@ */ +- +-/* We don't want libintl.a to depend on any other library. So we +- avoid the non-standard function stpcpy. In GNU C Library this +- function is available, though. Also allow the symbol HAVE_STPCPY +- to be defined. */ +-#if !_LIBC && !HAVE_STPCPY +-static char * +-stpcpy (dest, src) +- char *dest; +- const char *src; +-{ +- while ((*dest++ = *src++) != '\0') +- /* Do nothing. */ ; +- return dest - 1; +-} +-#endif +diff -uprN clean/lrzsz-0.12.20/intl/ChangeLog lrzsz-0.12.20/intl/ChangeLog +--- clean/lrzsz-0.12.20/intl/ChangeLog 1998-04-26 14:22:35.000000000 +0100 ++++ lrzsz-0.12.20/intl/ChangeLog 1970-01-01 01:00:00.000000000 +0100 +@@ -1,1022 +0,0 @@ +-1997-09-06 02:10 Ulrich Drepper <drepper@cygnus.com> +- +- * intlh.inst.in: Reformat copyright. +- +-1997-08-19 15:22 Ulrich Drepper <drepper@cygnus.com> +- +- * dcgettext.c (DCGETTEXT): Remove wrong comment. +- +-1997-08-16 00:13 Ulrich Drepper <drepper@cygnus.com> +- +- * Makefile.in (install-data): Don't change directory to install. +- +-1997-08-01 14:30 Ulrich Drepper <drepper@cygnus.com> +- +- * cat-compat.c: Fix copyright. +- +- * localealias.c: Don't define strchr unless !HAVE_STRCHR. +- +- * loadmsgcat.c: Update copyright. Fix typos. +- +- * l10nflist.c: Don't define strchr unless !HAVE_STRCHR. +- (_nl_make_l10nflist): Handle sponsor and revision correctly. +- +- * gettext.c: Update copyright. +- * gettext.h: Likewise. +- * hash-string.h: Likewise. +- +- * finddomain.c: Remoave dead code. Define strchr only if +- !HAVE_STRCHR. +- +- * explodename.c: Include <sys/types.h>. +- +- * explodename.c: Reformat copyright text. +- (_nl_explode_name): Fix typo. +- +- * dcgettext.c: Define and use __set_errno. +- (guess_category_value): Don't use setlocale if HAVE_LC_MESSAGES is +- not defined. +- +- * bindtextdom.c: Pretty printing. +- +-1997-05-01 02:25 Ulrich Drepper <drepper@cygnus.com> +- +- * dcgettext.c (guess_category_value): Don't depend on +- HAVE_LC_MESSAGES. We don't need the macro here. +- Patch by Bruno Haible <haible@ilog.fr>. +- +- * cat-compat.c (textdomain): DoN't refer to HAVE_SETLOCALE_NULL +- macro. Instead use HAVE_LOCALE_NULL and define it when using +- glibc, as in dcgettext.c. +- Patch by Bruno Haible <haible@ilog.fr>. +- +- * Makefile.in (CPPFLAGS): New variable. Reported by Franc,ois +- Pinard. +- +-Mon Mar 10 06:51:17 1997 Ulrich Drepper <drepper@cygnus.com> +- +- * Makefile.in: Implement handling of libtool. +- +- * gettextP.h: Change data structures for use of generic lowlevel +- i18n file handling. +- +-Wed Dec 4 20:21:18 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * textdomain.c: Put parentheses around arguments of memcpy macro +- definition. +- * localealias.c: Likewise. +- * l10nflist.c: Likewise. +- * finddomain.c: Likewise. +- * bindtextdom.c: Likewise. +- Reported by Thomas Esken. +- +-Mon Nov 25 22:57:51 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * textdomain.c: Move definition of `memcpy` macro to right +- position. +- +-Fri Nov 22 04:01:58 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * finddomain.c [!HAVE_STRING_H && !_LIBC]: Define memcpy using +- bcopy if not already defined. Reported by Thomas Esken. +- * bindtextdom.c: Likewise. +- * l10nflist.c: Likewise. +- * localealias.c: Likewise. +- * textdomain.c: Likewise. +- +-Tue Oct 29 11:10:27 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * Makefile.in (libdir): Change to use exec_prefix instead of +- prefix. Reported by Knut-HåvardAksnes <etokna@eto.ericsson.se>. +- +-Sat Aug 31 03:07:09 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * l10nflist.c (_nl_normalize_codeset): We convert to lower case, +- so don't prepend uppercase `ISO' for only numeric arg. +- +-Fri Jul 19 00:15:46 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * l10nflist.c: Move inclusion of argz.h, ctype.h, stdlib.h after +- definition of _GNU_SOURCE. Patch by Roland McGrath. +- +- * Makefile.in (uninstall): Fix another bug with `for' loop and +- empty arguments. Patch by Jim Meyering. Correct name os +- uninstalled files: no intl- prefix anymore. +- +- * Makefile.in (install-data): Again work around shells which +- cannot handle mpty for list. Reported by Jim Meyering. +- +-Sat Jul 13 18:11:35 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * Makefile.in (install): Split goal. Now depend on install-exec +- and install-data. +- (install-exec, install-data): New goals. Created from former +- install goal. +- Reported by Karl Berry. +- +-Sat Jun 22 04:58:14 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * Makefile.in (MKINSTALLDIRS): New variable. Path to +- mkinstalldirs script. +- (install): use MKINSTALLDIRS variable or if the script is not present +- try to find it in the $top_scrdir). +- +-Wed Jun 19 02:56:56 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * l10nflist.c: Linux libc *partly* includes the argz_* functions. +- Grr. Work around by renaming the static version and use macros +- for renaming. +- +-Tue Jun 18 20:11:17 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * l10nflist.c: Correct presence test macros of __argz_* functions. +- +- * l10nflist.c: Include <argz.h> based on test of it instead when +- __argz_* functions are available. +- Reported by Andreas Schwab. +- +-Thu Jun 13 15:17:44 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * explodename.c, l10nflist.c: Define NULL for dumb systems. +- +-Tue Jun 11 17:05:13 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * intlh.inst.in, libgettext.h (dcgettext): Rename local variable +- result to __result to prevent name clash. +- +- * l10nflist.c, localealias.c, dcgettext.c: Define _GNU_SOURCE to +- get prototype for stpcpy and strcasecmp. +- +- * intlh.inst.in, libgettext.h: Move declaration of +- `_nl_msg_cat_cntr' outside __extension__ block to prevent warning +- from gcc's -Wnested-extern option. +- +-Fri Jun 7 01:58:00 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * Makefile.in (install): Remove comment. +- +-Thu Jun 6 17:28:17 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * Makefile.in (install): Work around for another Buglix stupidity. +- Always use an `else' close for `if's. Reported by Nelson Beebe. +- +- * Makefile.in (intlh.inst): Correct typo in phony rule. +- Reported by Nelson Beebe. +- +-Thu Jun 6 01:49:52 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * dcgettext.c (read_alias_file): Rename variable alloca_list to +- block_list as the macro calls assume. +- Patch by Eric Backus. +- +- * localealias.c [!HAVE_ALLOCA]: Define alloca as macro using +- malloc. +- (read_alias_file): Rename varriabe alloca_list to block_list as the +- macro calls assume. +- Patch by Eric Backus. +- +- * l10nflist.c: Correct conditional for <argz.h> inclusion. +- Reported by Roland McGrath. +- +- * Makefile.in (all): Depend on all-@USE_INCLUDED_LIBINTL@, not +- all-@USE_NLS@. +- +- * Makefile.in (install): intlh.inst comes from local dir, not +- $(srcdir). +- +- * Makefile.in (intlh.inst): Special handling of this goal. If +- used in gettext, this is really a rul to construct this file. If +- used in any other package it is defined as a .PHONY rule with +- empty body. +- +- * finddomain.c: Extract locale file information handling into +- l10nfile.c. Rename local stpcpy__ function to stpcpy. +- +- * dcgettext.c (stpcpy): Add local definition. +- +- * l10nflist.c: Solve some portability problems. Patches partly by +- Thomas Esken. Add local definition of stpcpy. +- +-Tue Jun 4 02:47:49 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * intlh.inst.in: Don't depend including <locale.h> on +- HAVE_LOCALE_H. Instead configure must rewrite this fiile +- depending on the result of the configure run. +- +- * Makefile.in (install): libintl.inst is now called intlh.inst. +- Add rules for updating intlh.inst from intlh.inst.in. +- +- * libintl.inst: Renamed to intlh.inst.in. +- +- * localealias.c, dcgettext.c [__GNUC__]: Define HAVE_ALLOCA to 1 +- because gcc has __buitlin_alloca. +- Reported by Roland McGrath. +- +-Mon Jun 3 00:32:16 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * Makefile.in (installcheck): New goal to fulfill needs of +- automake's distcheck. +- +- * Makefile.in (install): Reorder commands so that VERSION is +- found. +- +- * Makefile.in (gettextsrcdir): Now use subdirectory intl/ in +- @datadir@/gettext. +- (COMSRCS): Add l10nfile.c. +- (OBJECTS): Add l10nfile.o. +- (DISTFILES): Rename to DISTFILE.normal. Remove $(DISTFILES.common). +- (DISTFILE.gettext): Remove $(DISTFILES.common). +- (all-gettext): Remove goal. +- (install): If $(PACKAGE) = gettext install, otherwose do nothing. No +- package but gettext itself should install libintl.h + headers. +- (dist): Extend goal to work for gettext, too. +- (dist-gettext): Remove goal. +- +- * dcgettext.c [!HAVE_ALLOCA]: Define macro alloca by using malloc. +- +-Sun Jun 2 17:33:06 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * loadmsgcat.c (_nl_load_domain): Parameter is now comes from +- find_l10nfile. +- +-Sat Jun 1 02:23:03 1996 Ulrich Drepper <drepper@cygnus.com> +- +- * l10nflist.c (__argz_next): Add definition. +- +- * dcgettext.c [!HAVE_ALLOCA]: Add code for handling missing alloca +- code. Use new l10nfile handling. +- +- * localealias.c [!HAVE_ALLOCA]: Add code for handling missing +- alloca code. +- +- * l10nflist.c: Initial revision. +- +-Tue Apr 2 18:51:18 1996 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (all-gettext): New goal. Same as all-yes. +- +-Thu Mar 28 23:01:22 1996 Karl Eichwalder <ke@ke.central.de> +- +- * Makefile.in (gettextsrcdir): Define using @datadir@. +- +-Tue Mar 26 12:39:14 1996 Ulrich Drepper <drepper@myware> +- +- * finddomain.c: Include <ctype.h>. Reported by Roland McGrath. +- +-Sat Mar 23 02:00:35 1996 Ulrich Drepper <drepper@myware> +- +- * finddomain.c (stpcpy): Rename to stpcpy__ to prevent clashing +- with external declaration. +- +-Sat Mar 2 00:47:09 1996 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (all-no): Rename from all_no. +- +-Sat Feb 17 00:25:59 1996 Ulrich Drepper <drepper@myware> +- +- * gettextP.h [loaded_domain]: Array `successor' must now contain up +- to 63 elements (because of codeset name normalization). +- +- * finddomain.c: Implement codeset name normalization. +- +-Thu Feb 15 04:39:09 1996 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (all): Define to `all-@USE_NLS@'. +- (all-yes, all_no): New goals. `all-no' is noop, `all-yes' +- is former all. +- +-Mon Jan 15 21:46:01 1996 Howard Gayle <howard@hal.com> +- +- * localealias.c (alias_compare): Increment string pointers in loop +- of strcasecmp replacement. +- +-Fri Dec 29 21:16:34 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (install-src): Who commented this goal out ? :-) +- +-Fri Dec 29 15:08:16 1995 Ulrich Drepper <drepper@myware> +- +- * dcgettext.c (DCGETTEXT): Save `errno'. Failing system calls +- should not effect it because a missing catalog is no error. +- Reported by Harald K<o:>nig <koenig@tat.physik.uni-tuebingen.de>. +- +-Tue Dec 19 22:09:13 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (Makefile): Explicitly use $(SHELL) for running +- shell scripts. +- +-Fri Dec 15 17:34:59 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> +- +- * Makefile.in (install-src): Only install library and header when +- we use the own implementation. Don't do it when using the +- system's gettext or catgets functions. +- +- * dcgettext.c (find_msg): Must not swap domain->hash_size here. +- +-Sat Dec 9 16:24:37 1995 Ulrich Drepper <drepper@myware> +- +- * localealias.c, libintl.inst, libgettext.h, hash-string.h, +- gettextP.h, finddomain.c, dcgettext.c, cat-compat.c: +- Use PARAMS instead of __P. Suggested by Roland McGrath. +- +-Tue Dec 5 11:39:14 1995 Larry Schwimmer <rosebud@cyclone.stanford.edu> +- +- * libgettext.h: Use `#if !defined (_LIBINTL_H)' instead of `#if +- !_LIBINTL_H' because Solaris defines _LIBINTL_H as empty. +- +-Mon Dec 4 15:42:07 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (install-src): +- Install libintl.inst instead of libintl.h.install. +- +-Sat Dec 2 22:51:38 1995 Marcus Daniels <marcus@sysc.pdx.edu> +- +- * cat-compat.c (textdomain): +- Reverse order in which files are tried you load. First +- try local file, when this failed absolute path. +- +-Wed Nov 29 02:03:53 1995 Nelson H. F. Beebe <beebe@math.utah.edu> +- +- * cat-compat.c (bindtextdomain): Add missing { }. +- +-Sun Nov 26 18:21:41 1995 Ulrich Drepper <drepper@myware> +- +- * libintl.inst: Add missing __P definition. Reported by Nelson Beebe. +- +- * Makefile.in: +- Add dummy `all' and `dvi' goals. Reported by Tom Tromey. +- +-Sat Nov 25 16:12:01 1995 Franc,ois Pinard <pinard@iro.umontreal.ca> +- +- * hash-string.h: Capitalize arguments of macros. +- +-Sat Nov 25 12:01:36 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (DISTFILES): Prevent files names longer than 13 +- characters. libintl.h.glibc->libintl.glibc, +- libintl.h.install->libintl.inst. Reported by Joshua R. Poulson. +- +-Sat Nov 25 11:31:12 1995 Eric Backus <ericb@lsid.hp.com> +- +- * dcgettext.c: Fix bug in preprocessor conditionals. +- +-Sat Nov 25 02:35:27 1995 Nelson H. F. Beebe <beebe@math.utah.edu> +- +- * libgettext.h: Solaris cc does not understand +- #if !SYMBOL1 && !SYMBOL2. Sad but true. +- +-Thu Nov 23 16:22:14 1995 Ulrich Drepper <drepper@myware> +- +- * hash-string.h (hash_string): +- Fix for machine with >32 bit `unsigned long's. +- +- * dcgettext.c (DCGETTEXT): +- Fix horrible bug in loop for alternative translation. +- +-Thu Nov 23 01:45:29 1995 Ulrich Drepper <drepper@myware> +- +- * po2tbl.sed.in, linux-msg.sed, xopen-msg.sed: +- Some further simplifications in message number generation. +- +-Mon Nov 20 21:08:43 1995 Ulrich Drepper <drepper@myware> +- +- * libintl.h.glibc: Use __const instead of const in prototypes. +- +- * Makefile.in (install-src): +- Install libintl.h.install instead of libintl.h. This +- is a stripped-down version. Suggested by Peter Miller. +- +- * libintl.h.install, libintl.h.glibc: Initial revision. +- +- * localealias.c (_nl_expand_alias, read_alias_file): +- Protect prototypes in type casts by __P. +- +-Tue Nov 14 16:43:58 1995 Ulrich Drepper <drepper@myware> +- +- * hash-string.h: Correct prototype for hash_string. +- +-Sun Nov 12 12:42:30 1995 Ulrich Drepper <drepper@myware> +- +- * hash-string.h (hash_string): Add prototype. +- +- * gettextP.h: Fix copyright. +- (SWAP): Add prototype. +- +-Wed Nov 8 22:56:33 1995 Ulrich Drepper <drepper@myware> +- +- * localealias.c (read_alias_file): Forgot sizeof. +- Avoid calling *printf function. This introduces a big overhead. +- Patch by Roland McGrath. +- +-Tue Nov 7 14:21:08 1995 Ulrich Drepper <drepper@myware> +- +- * finddomain.c, cat-compat.c: Wrong indentation in #if for stpcpy. +- +- * finddomain.c (stpcpy): +- Define substitution function local. The macro was to flaky. +- +- * cat-compat.c: Fix typo. +- +- * xopen-msg.sed, linux-msg.sed: +- While bringing message number to right place only accept digits. +- +- * linux-msg.sed, xopen-msg.sed: Now that the counter does not have +- leading 0s we don't need to remove them. Reported by Marcus +- Daniels. +- +- * Makefile.in (../po/cat-id-tbl.o): Use $(top_srdir) in +- dependency. Reported by Marcus Daniels. +- +- * cat-compat.c: (stpcpy) [!_LIBC && !HAVE_STPCPY]: Define replacement. +- Generally cleanup using #if instead of #ifndef. +- +- * Makefile.in: Correct typos in comment. By Franc,ois Pinard. +- +-Mon Nov 6 00:27:02 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (install-src): Don't install libintl.h and libintl.a +- if we use an available gettext implementation. +- +-Sun Nov 5 22:02:08 1995 Ulrich Drepper <drepper@myware> +- +- * libgettext.h: Fix typo: HAVE_CATGETTS -> HAVE_CATGETS. Reported +- by Franc,ois Pinard. +- +- * libgettext.h: Use #if instead of #ifdef/#ifndef. +- +- * finddomain.c: +- Comments describing what has to be done should start with FIXME. +- +-Sun Nov 5 19:38:01 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (DISTFILES): Split. Use DISTFILES with normal meaning. +- DISTFILES.common names the files common to both dist goals. +- DISTFILES.gettext are the files only distributed in GNU gettext. +- +-Sun Nov 5 17:32:54 1995 Ulrich Drepper <drepper@myware> +- +- * dcgettext.c (DCGETTEXT): Correct searching in derived locales. +- This was necessary since a change in _nl_find_msg several weeks +- ago. I really don't know this is still not fixed. +- +-Sun Nov 5 12:43:12 1995 Ulrich Drepper <drepper@myware> +- +- * loadmsgcat.c (_nl_load_domain): Test for FILENAME == NULL. This +- might mark a special condition. +- +- * finddomain.c (make_entry_rec): Don't make illegal entry as decided. +- +- * Makefile.in (dist): Suppress error message when ln failed. +- Get files from $(srcdir) explicitly. +- +- * libgettext.h (gettext_const): Rename to gettext_noop. +- +-Fri Nov 3 07:36:50 1995 Ulrich Drepper <drepper@myware> +- +- * finddomain.c (make_entry_rec): +- Protect against wrong locale names by testing mask. +- +- * libgettext.h (gettext_const): Add macro definition. +- Capitalize macro arguments. +- +-Thu Nov 2 23:15:51 1995 Ulrich Drepper <drepper@myware> +- +- * finddomain.c (_nl_find_domain): +- Test for pointer != NULL before accessing value. +- Reported by Tom Tromey. +- +- * gettext.c (NULL): +- Define as (void*)0 instad of 0. Reported by Franc,ois Pinard. +- +-Mon Oct 30 21:28:52 1995 Ulrich Drepper <drepper@myware> +- +- * po2tbl.sed.in: Serious typo bug fixed by Jim Meyering. +- +-Sat Oct 28 23:20:47 1995 Ulrich Drepper <drepper@myware> +- +- * libgettext.h: Disable dcgettext optimization for Solaris 2.3. +- +- * localealias.c (alias_compare): +- Peter Miller reported that tolower in some systems is +- even dumber than I thought. Protect call by `isupper'. +- +-Fri Oct 27 22:22:51 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (libdir, includedir): New variables. +- (install-src): Install libintl.a and libintl.h in correct dirs. +- +-Fri Oct 27 22:07:29 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (SOURCES): Fix typo: intrl.compat.c -> intl-compat.c. +- +- * po2tbl.sed.in: Patch for buggy SEDs by Christian von Roques. +- +- * localealias.c: +- Fix typo and superflous test. Reported by Christian von Roques. +- +-Fri Oct 6 11:52:05 1995 Ulrich Drepper <drepper@myware> +- +- * finddomain.c (_nl_find_domain): +- Correct some remainder from the pre-CEN syntax. Now +- we don't have a constant number of successors anymore. +- +-Wed Sep 27 21:41:13 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (DISTFILES): Add libintl.h.glibc. +- +- * Makefile.in (dist-libc): Add goal for packing sources for glibc. +- (COMSRCS, COMHDRS): Splitted to separate sources shared with glibc. +- +- * loadmsgcat.c: Forget to continue #if line. +- +- * localealias.c: +- [_LIBC]: Rename strcasecmp to __strcasecmp to keep ANSI C name +- space clean. +- +- * dcgettext.c, finddomain.c: Better comment to last change. +- +- * loadmsgcat.c: +- [_LIBC]: Rename fstat, open, close, read, mmap, and munmap to +- __fstat, __open, __close, __read, __mmap, and __munmap resp +- to keep ANSI C name space clean. +- +- * finddomain.c: +- [_LIBC]: Rename stpcpy to __stpcpy to keep ANSI C name space clean. +- +- * dcgettext.c: +- [_LIBC]: Rename getced and stpcpy to __getcwd and __stpcpy resp to +- keep ANSI C name space clean. +- +- * libgettext.h: +- Include sys/types.h for those old SysV systems out there. +- Reported by Francesco Potorti`. +- +- * loadmsgcat.c (use_mmap): Define if compiled for glibc. +- +- * bindtextdom.c: Include all those standard headers +- unconditionally if _LIBC is defined. +- +- * finddomain.c: Fix 2 times defiend -> defined. +- +- * textdomain.c: Include libintl.h instead of libgettext.h when +- compiling for glibc. Include all those standard headers +- unconditionally if _LIBC is defined. +- +- * localealias.c, loadmsgcat.c: Prepare to be compiled in glibc. +- +- * gettext.c: +- Include libintl.h instead of libgettext.h when compiling for glibc. +- Get NULL from stddef.h if we compile for glibc. +- +- * finddomain.c: Include libintl.h instead of libgettext.h when +- compiling for glibc. Include all those standard headers +- unconditionally if _LIBC is defined. +- +- * dcgettext.c: Include all those standard headers unconditionally +- if _LIBC is defined. +- +- * dgettext.c: If compiled in glibc include libintl.h instead of +- libgettext.h. +- (locale.h): Don't rely on HAVE_LOCALE_H when compiling for glibc. +- +- * dcgettext.c: If compiled in glibc include libintl.h instead of +- libgettext.h. +- (getcwd): Don't rely on HAVE_GETCWD when compiling for glibc. +- +- * bindtextdom.c: +- If compiled in glibc include libintl.h instead of libgettext.h. +- +-Mon Sep 25 22:23:06 1995 Ulrich Drepper <drepper@myware> +- +- * localealias.c (_nl_expand_alias): Don't call bsearch if NMAP <= 0. +- Reported by Marcus Daniels. +- +- * cat-compat.c (bindtextdomain): +- String used in putenv must not be recycled. +- Reported by Marcus Daniels. +- +- * libgettext.h (__USE_GNU_GETTEXT): +- Additional symbol to signal that we use GNU gettext +- library. +- +- * cat-compat.c (bindtextdomain): +- Fix bug with the strange stpcpy replacement. +- Reported by Nelson Beebe. +- +-Sat Sep 23 08:23:51 1995 Ulrich Drepper <drepper@myware> +- +- * cat-compat.c: Include <string.h> for stpcpy prototype. +- +- * localealias.c (read_alias_file): +- While expand strdup code temporary variable `cp' hided +- higher level variable with same name. Rename to `tp'. +- +- * textdomain.c (textdomain): +- Avoid warning by using temporary variable in strdup code. +- +- * finddomain.c (_nl_find_domain): Remove unused variable `application'. +- +-Thu Sep 21 15:51:44 1995 Ulrich Drepper <drepper@myware> +- +- * localealias.c (alias_compare): +- Use strcasecmp() only if available. Else use +- implementation in place. +- +- * intl-compat.c: +- Wrapper functions now call *__ functions instead of __*. +- +- * libgettext.h: Declare prototypes for *__ functions instead for __*. +- +- * cat-compat.c, loadmsgcat.c: +- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part +- of the standard libc and so prevent libintl.a from being used +- standalone. +- +- * bindtextdom.c: +- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part +- of the standard libc and so prevent libintl.a from being used +- standalone. +- Rename to bindtextdomain__ if not used in GNU C Library. +- +- * dgettext.c: +- Rename function to dgettext__ if not used in GNU C Library. +- +- * gettext.c: +- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part +- of the standard libc and so prevent libintl.a from being used +- standalone. +- Functions now called gettext__ if not used in GNU C Library. +- +- * dcgettext.c, localealias.c, textdomain.c, finddomain.c: +- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part +- of the standard libc and so prevent libintl.a from being used +- standalone. +- +-Sun Sep 17 23:14:49 1995 Ulrich Drepper <drepper@myware> +- +- * finddomain.c: Correct some bugs in handling of CEN standard +- locale definitions. +- +-Thu Sep 7 01:49:28 1995 Ulrich Drepper <drepper@myware> +- +- * finddomain.c: Implement CEN syntax. +- +- * gettextP.h (loaded_domain): Extend number of successors to 31. +- +-Sat Aug 19 19:25:29 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (aliaspath): Remove path to X11 locale dir. +- +- * Makefile.in: Make install-src depend on install. This helps +- gettext to install the sources and other packages can use the +- install goal. +- +-Sat Aug 19 15:19:33 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (uninstall): Remove stuff installed by install-src. +- +-Tue Aug 15 13:13:53 1995 Ulrich Drepper <drepper@myware> +- +- * VERSION.in: Initial revision. +- +- * Makefile.in (DISTFILES): +- Add VERSION file. This is not necessary for gettext, but +- for other packages using this library. +- +-Tue Aug 15 06:16:44 1995 Ulrich Drepper <drepper@myware> +- +- * gettextP.h (_nl_find_domain): +- New prototype after changing search strategy. +- +- * finddomain.c (_nl_find_domain): +- We now try only to find a specified catalog. Fall back to other +- catalogs listed in the locale list is now done in __dcgettext. +- +- * dcgettext.c (__dcgettext): +- Now we provide message fall back even to different languages. +- I.e. if a message is not available in one language all the other +- in the locale list a tried. Formerly fall back was only possible +- within one language. Implemented by moving one loop from +- _nl_find_domain to here. +- +-Mon Aug 14 23:45:50 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (gettextsrcdir): +- Directory where source of GNU gettext library are made +- available. +- (INSTALL, INSTALL_DATA): Programs used for installing sources. +- (gettext-src): New. Rule to install GNU gettext sources for use in +- gettextize shell script. +- +-Sun Aug 13 14:40:48 1995 Ulrich Drepper <drepper@myware> +- +- * loadmsgcat.c (_nl_load_domain): +- Use mmap for loading only when munmap function is +- also available. +- +- * Makefile.in (install): Depend on `all' goal. +- +-Wed Aug 9 11:04:33 1995 Ulrich Drepper <drepper@myware> +- +- * localealias.c (read_alias_file): +- Do not overwrite '\n' when terminating alias value string. +- +- * localealias.c (read_alias_file): +- Handle long lines. Ignore the rest not fitting in +- the buffer after the initial `fgets' call. +- +-Wed Aug 9 00:54:29 1995 Ulrich Drepper <drepper@myware> +- +- * gettextP.h (_nl_load_domain): +- Add prototype, replacing prototype for _nl_load_msg_cat. +- +- * finddomain.c (_nl_find_domain): +- Remove unneeded variable filename and filename_len. +- (expand_alias): Remove prototype because functions does not +- exist anymore. +- +- * localealias.c (read_alias_file): +- Change type of fname_len parameter to int. +- (xmalloc): Add prototype. +- +- * loadmsgcat.c: Better prototypes for xmalloc. +- +-Tue Aug 8 22:30:39 1995 Ulrich Drepper <drepper@myware> +- +- * finddomain.c (_nl_find_domain): +- Allow alias name to be constructed from the four components. +- +- * Makefile.in (aliaspath): New variable. Set to preliminary value. +- (SOURCES): Add localealias.c. +- (OBJECTS): Add localealias.o. +- +- * gettextP.h: Add prototype for _nl_expand_alias. +- +- * finddomain.c: Aliasing handled in intl/localealias.c. +- +- * localealias.c: Aliasing for locale names. +- +- * bindtextdom.c: Better prototypes for xmalloc and xstrdup. +- +-Mon Aug 7 23:47:42 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (DISTFILES): gettext.perl is now found in misc/. +- +- * cat-compat.c (bindtextdomain): +- Correct implementation. dirname parameter was not used. +- Reported by Marcus Daniels. +- +- * gettextP.h (loaded_domain): +- New fields `successor' and `decided' for oo, lazy +- message handling implementation. +- +- * dcgettext.c: +- Adopt for oo, lazy message handliing. +- Now we can inherit translations from less specific locales. +- (find_msg): New function. +- +- * loadmsgcat.c, finddomain.c: +- Complete rewrite. Implement oo, lazy message handling :-). +- We now have an additional environment variable `LANGUAGE' with +- a higher priority than LC_ALL for the LC_MESSAGE locale. +- Here we can set a colon separated list of specifications each +- of the form `language[_territory[.codeset]][@modifier]'. +- +-Sat Aug 5 09:55:42 1995 Ulrich Drepper <drepper@myware> +- +- * finddomain.c (unistd.h): +- Include to get _PC_PATH_MAX defined on system having it. +- +-Fri Aug 4 22:42:00 1995 Ulrich Drepper <drepper@myware> +- +- * finddomain.c (stpcpy): Include prototype. +- +- * Makefile.in (dist): Remove `copying instead' message. +- +-Wed Aug 2 18:52:03 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (ID, TAGS): Do not use $^. +- +-Tue Aug 1 20:07:11 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (TAGS, ID): Use $^ as command argument. +- (TAGS): Give etags -o option t write to current directory, +- not $(srcdir). +- (ID): Use $(srcdir) instead os $(top_srcdir)/src. +- (distclean): Remove ID. +- +-Sun Jul 30 11:51:46 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (gnulocaledir): +- New variable, always using share/ for data directory. +- (DEFS): Add GNULOCALEDIR, used in finddomain.c. +- +- * finddomain.c (_nl_default_dirname): +- Set to GNULOCALEDIR, because it always has to point +- to the directory where GNU gettext Library writes it to. +- +- * intl-compat.c (textdomain, bindtextdomain): +- Undefine macros before function definition. +- +-Sat Jul 22 01:10:02 1995 Ulrich Drepper <drepper@myware> +- +- * libgettext.h (_LIBINTL_H): +- Protect definition in case where this file is included as +- libgettext.h on Solaris machines. Add comment about this. +- +-Wed Jul 19 02:36:42 1995 Ulrich Drepper <drepper@myware> +- +- * intl-compat.c (textdomain): Correct typo. +- +-Wed Jul 19 01:51:35 1995 Ulrich Drepper <drepper@myware> +- +- * dcgettext.c (dcgettext): Function now called __dcgettext. +- +- * dgettext.c (dgettext): Now called __dgettext and calls +- __dcgettext. +- +- * gettext.c (gettext): +- Function now called __gettext and calls __dgettext. +- +- * textdomain.c (textdomain): Function now called __textdomain. +- +- * bindtextdom.c (bindtextdomain): Function now called +- __bindtextdomain. +- +- * intl-compat.c: Initial revision. +- +- * Makefile.in (SOURCES): Add intl-compat.c. +- (OBJECTS): We always compile the GNU gettext library functions. +- OBJECTS contains all objects but cat-compat.o, ../po/cat-if-tbl.o, +- and intl-compat.o. +- (GETTOBJS): Contains now only intl-compat.o. +- +- * libgettext.h: +- Re-include protection matches dualistic character of libgettext.h. +- For all functions in GNU gettext library define __ counter part. +- +- * finddomain.c (strchr): Define as index if not found in C library. +- (_nl_find_domain): For relative paths paste / in between. +- +-Tue Jul 18 16:37:45 1995 Ulrich Drepper <drepper@myware> +- +- * loadmsgcat.c, finddomain.c: Add inclusion of sys/types.h. +- +- * xopen-msg.sed: Fix bug with `msgstr ""' lines. +- A little bit better comments. +- +-Tue Jul 18 01:18:27 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in: +- po-mode.el, makelinks, combine-sh are now found in ../misc. +- +- * po-mode.el, makelinks, combine-sh, elisp-comp: +- Moved to ../misc/. +- +- * libgettext.h, gettextP.h, gettext.h: Uniform test for __STDC__. +- +-Sun Jul 16 22:33:02 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (INSTALL, INSTALL_DATA): New variables. +- (install-data, uninstall): Install/uninstall .elc file. +- +- * po-mode.el (Installation comment): +- Add .pox as possible extension of .po files. +- +-Sun Jul 16 13:23:27 1995 Ulrich Drepper <drepper@myware> +- +- * elisp-comp: Complete new version by Franc,ois: This does not +- fail when not compiling in the source directory. +- +-Sun Jul 16 00:12:17 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (../po/cat-id-tbl.o): +- Use $(MAKE) instead of make for recursive make. +- +- * Makefile.in (.el.elc): Use $(SHELL) instead of /bin/sh. +- (install-exec): Add missing dummy goal. +- (install-data, uninstall): @ in multi-line shell command at +- beginning, not in front of echo. Reported by Eric Backus. +- +-Sat Jul 15 00:21:28 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (DISTFILES): +- Rename libgettext.perl to gettext.perl to fit in 14 chars +- file systems. +- +- * gettext.perl: +- Rename to gettext.perl to fit in 14 chars file systems. +- +-Thu Jul 13 23:17:20 1995 Ulrich Drepper <drepper@myware> +- +- * cat-compat.c: If !STDC_HEADERS try to include malloc.h. +- +-Thu Jul 13 20:55:02 1995 Ulrich Drepper <drepper@myware> +- +- * po2tbl.sed.in: Pretty printing. +- +- * linux-msg.sed, xopen-msg.sed: +- Correct bugs with handling substitute flags in branches. +- +- * hash-string.h (hash_string): +- Old K&R compilers don't under stand `unsigned char'. +- +- * gettext.h (nls_uint32): +- Some old K&R compilers (eg HP) don't understand `unsigned int'. +- +- * cat-compat.c (msg_to_cat_id): De-ANSI-fy prototypes. +- +-Thu Jul 13 01:34:33 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (ELCFILES): New variable. +- (DISTFILES): Add elisp-comp. +- Add implicit rule for .el -> .elc compilation. +- (install-data): install $ELCFILES +- (clean): renamed po-to-tbl and po-to-msg to po2tbl and po2msg resp. +- +- * elisp-comp: Initial revision +- +-Wed Jul 12 16:14:52 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in: +- cat-id-tbl.c is now found in po/. This enables us to use an identical +- intl/ directory in all packages. +- +- * dcgettext.c (dcgettext): hashing does not work for table size <= 2. +- +- * textdomain.c: fix typo (#if def -> #if defined) +- +-Tue Jul 11 18:44:43 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in (stamp-cat-id): use top_srcdir to address source files +- (DISTFILES,distclean): move tupdate.perl to src/ +- +- * po-to-tbl.sed.in: +- add additional jump to clear change flag to recognize multiline strings +- +-Tue Jul 11 01:32:50 1995 Ulrich Drepper <drepper@myware> +- +- * textdomain.c: Protect inclusion of stdlib.h and string.h. +- +- * loadmsgcat.c: Protect inclusion of stdlib.h. +- +- * libgettext.h: Protect inclusion of locale.h. +- Allow use in C++ programs. +- Define NULL is not happened already. +- +- * Makefile.in (DISTFILES): ship po-to-tbl.sed.in instead of +- po-to-tbl.sed. +- (distclean): remove po-to-tbl.sed and tupdate.perl. +- +- * tupdate.perl.in: Substitute Perl path even in exec line. +- Don't include entries without translation from old .po file. +- +-Tue Jul 4 00:41:51 1995 Ulrich Drepper <drepper@myware> +- +- * tupdate.perl.in: use "Updated: " in msgid "". +- +- * cat-compat.c: Fix typo (LOCALDIR -> LOCALEDIR). +- Define getenv if !__STDC__. +- +- * bindtextdom.c: Protect stdlib.h and string.h inclusion. +- Define free if !__STDC__. +- +- * finddomain.c: Change DEF_MSG_DOM_DIR to LOCALEDIR. +- Define free if !__STDC__. +- +- * cat-compat.c: Change DEF_MSG_DOM_DIR to LOCALEDIR. +- +-Mon Jul 3 23:56:30 1995 Ulrich Drepper <drepper@myware> +- +- * Makefile.in: Use LOCALEDIR instead of DEF_MSG_DOM_DIR. +- Remove unneeded $(srcdir) from Makefile.in dependency. +- +- * makelinks: Add copyright and short description. +- +- * po-mode.el: Last version for 0.7. +- +- * tupdate.perl.in: Fix die message. +- +- * dcgettext.c: Protect include of string.h. +- +- * gettext.c: Protect include of stdlib.h and further tries to get NULL. +- +- * finddomain.c: Some corrections in includes. +- +- * Makefile.in (INCLUDES): Prune list correct path to Makefile.in. +- +- * po-to-tbl.sed: Adopt for new .po file format. +- +- * linux-msg.sed, xopen-msg.sed: Adopt for new .po file format. +- +-Sun Jul 2 23:55:03 1995 Ulrich Drepper <drepper@myware> +- +- * tupdate.perl.in: Complete rewrite for new .po file format. +- +-Sun Jul 2 02:06:50 1995 Ulrich Drepper <drepper@myware> +- +- * First official release. This directory contains all the code +- needed to internationalize own packages. It provides functions +- which allow to use the X/Open catgets function with an interface +- like the Uniforum gettext function. For system which does not +- have neither of those a complete implementation is provided. +diff -uprN clean/lrzsz-0.12.20/intl/dcgettext.c lrzsz-0.12.20/intl/dcgettext.c +--- clean/lrzsz-0.12.20/intl/dcgettext.c 1998-04-26 14:22:36.000000000 +0100 ++++ lrzsz-0.12.20/intl/dcgettext.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,593 +0,0 @@ +-/* Implementation of the dcgettext(3) function +- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc. +- +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2, or (at your option) +- any later version. +- +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. +- +- You should have received a copy of the GNU General Public License +- along with this program; if not, write to the Free Software Foundation, +- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +- +-#ifdef HAVE_CONFIG_H +-# include <config.h> +-#endif +- +-#include <sys/types.h> +- +-#ifdef __GNUC__ +-# define alloca __builtin_alloca +-# define HAVE_ALLOCA 1 +-#else +-# if defined HAVE_ALLOCA_H || defined _LIBC +-# include <alloca.h> +-# else +-# ifdef _AIX +- #pragma alloca +-# else +-# ifndef alloca +-char *alloca (); +-# endif +-# endif +-# endif +-#endif +- +-#include <errno.h> +-#ifndef errno +-extern int errno; +-#endif +-#ifndef __set_errno +-# define __set_errno(val) errno = (val) +-#endif +- +-#if defined STDC_HEADERS || defined _LIBC +-# include <stdlib.h> +-#else +-char *getenv (); +-# ifdef HAVE_MALLOC_H +-# include <malloc.h> +-# else +-void free (); +-# endif +-#endif +- +-#if defined HAVE_STRING_H || defined _LIBC +-# ifndef _GNU_SOURCE +-# define _GNU_SOURCE 1 +-# endif +-# include <string.h> +-#else +-# include <strings.h> +-#endif +-#if !HAVE_STRCHR && !defined _LIBC +-# ifndef strchr +-# define strchr index +-# endif +-#endif +- +-#if defined HAVE_UNISTD_H || defined _LIBC +-# include <unistd.h> +-#endif +- +-#include "gettext.h" +-#include "gettextP.h" +-#ifdef _LIBC +-# include <libintl.h> +-#else +-# include "libgettext.h" +-#endif +-#include "hash-string.h" +- +-/* @@ end of prolog @@ */ +- +-#ifdef _LIBC +-/* Rename the non ANSI C functions. This is required by the standard +- because some ANSI C functions will require linking with this object +- file and the name space must not be polluted. */ +-# define getcwd __getcwd +-# define stpcpy __stpcpy +-#else +-# if !defined HAVE_GETCWD +-char *getwd (); +-# define getcwd(buf, max) getwd (buf) +-# else +-char *getcwd (); +-# endif +-# ifndef HAVE_STPCPY +-static char *stpcpy PARAMS ((char *dest, const char *src)); +-# endif +-#endif +- +-/* Amount to increase buffer size by in each try. */ +-#define PATH_INCR 32 +- +-/* The following is from pathmax.h. */ +-/* Non-POSIX BSD systems might have gcc's limits.h, which doesn't define +- PATH_MAX but might cause redefinition warnings when sys/param.h is +- later included (as on MORE/BSD 4.3). */ +-#if defined(_POSIX_VERSION) || (defined(HAVE_LIMITS_H) && !defined(__GNUC__)) +-# include <limits.h> +-#endif +- +-#ifndef _POSIX_PATH_MAX +-# define _POSIX_PATH_MAX 255 +-#endif +- +-#if !defined(PATH_MAX) && defined(_PC_PATH_MAX) +-# define PATH_MAX (pathconf ("/", _PC_PATH_MAX) < 1 ? 1024 : pathconf ("/", _PC_PATH_MAX)) +-#endif +- +-/* Don't include sys/param.h if it already has been. */ +-#if defined(HAVE_SYS_PARAM_H) && !defined(PATH_MAX) && !defined(MAXPATHLEN) +-# include <sys/param.h> +-#endif +- +-#if !defined(PATH_MAX) && defined(MAXPATHLEN) +-# define PATH_MAX MAXPATHLEN +-#endif +- +-#ifndef PATH_MAX +-# define PATH_MAX _POSIX_PATH_MAX +-#endif +- +-/* XPG3 defines the result of `setlocale (category, NULL)' as: +- ``Directs `setlocale()' to query `category' and return the current +- setting of `local'.'' +- However it does not specify the exact format. And even worse: POSIX +- defines this not at all. So we can use this feature only on selected +- system (e.g. those using GNU C Library). */ +-#ifdef _LIBC +-# define HAVE_LOCALE_NULL +-#endif +- +-/* Name of the default domain used for gettext(3) prior any call to +- textdomain(3). The default value for this is "messages". */ +-const char _nl_default_default_domain[] = "messages"; +- +-/* Value used as the default domain for gettext(3). */ +-const char *_nl_current_default_domain = _nl_default_default_domain; +- +-/* Contains the default location of the message catalogs. */ +-const char _nl_default_dirname[] = GNULOCALEDIR; +- +-/* List with bindings of specific domains created by bindtextdomain() +- calls. */ +-struct binding *_nl_domain_bindings; +- +-/* Prototypes for local functions. */ +-static char *find_msg PARAMS ((struct loaded_l10nfile *domain_file, +- const char *msgid)); +-static const char *category_to_name PARAMS ((int category)); +-static const char *guess_category_value PARAMS ((int category, +- const char *categoryname)); +- +- +-/* For those loosing systems which don't have `alloca' we have to add +- some additional code emulating it. */ +-#ifdef HAVE_ALLOCA +-/* Nothing has to be done. */ +-# define ADD_BLOCK(list, address) /* nothing */ +-# define FREE_BLOCKS(list) /* nothing */ +-#else +-struct block_list +-{ +- void *address; +- struct block_list *next; +-}; +-# define ADD_BLOCK(list, addr) \ +- do { \ +- struct block_list *newp = (struct block_list *) malloc (sizeof (*newp)); \ +- /* If we cannot get a free block we cannot add the new element to \ +- the list. */ \ +- if (newp != NULL) { \ +- newp->address = (addr); \ +- newp->next = (list); \ +- (list) = newp; \ +- } \ +- } while (0) +-# define FREE_BLOCKS(list) \ +- do { \ +- while (list != NULL) { \ +- struct block_list *old = list; \ +- list = list->next; \ +- free (old); \ +- } \ +- } while (0) +-# undef alloca +-# define alloca(size) (malloc (size)) +-#endif /* have alloca */ +- +- +-/* Names for the libintl functions are a problem. They must not clash +- with existing names and they should follow ANSI C. But this source +- code is also used in GNU C Library where the names have a __ +- prefix. So we have to make a difference here. */ +-#ifdef _LIBC +-# define DCGETTEXT __dcgettext +-#else +-# define DCGETTEXT dcgettext__ +-#endif +- +-/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY +- locale. */ +-char * +-DCGETTEXT (domainname, msgid, category) +- const char *domainname; +- const char *msgid; +- int category; +-{ +-#ifndef HAVE_ALLOCA +- struct block_list *block_list = NULL; +-#endif +- struct loaded_l10nfile *domain; +- struct binding *binding; +- const char *categoryname; +- const char *categoryvalue; +- char *dirname, *xdomainname; +- char *single_locale; +- char *retval; +- int saved_errno = errno; +- +- /* If no real MSGID is given return NULL. */ +- if (msgid == NULL) +- return NULL; +- +- /* If DOMAINNAME is NULL, we are interested in the default domain. If +- CATEGORY is not LC_MESSAGES this might not make much sense but the +- defintion left this undefined. */ +- if (domainname == NULL) +- domainname = _nl_current_default_domain; +- +- /* First find matching binding. */ +- for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next) +- { +- int compare = strcmp (domainname, binding->domainname); +- if (compare == 0) +- /* We found it! */ +- break; +- if (compare < 0) +- { +- /* It is not in the list. */ +- binding = NULL; +- break; +- } +- } +- +- if (binding == NULL) +- dirname = (char *) _nl_default_dirname; +- else if (binding->dirname[0] == '/') +- dirname = binding->dirname; +- else +- { +- /* We have a relative path. Make it absolute now. */ +- size_t dirname_len = strlen (binding->dirname) + 1; +- size_t path_max; +- char *ret; +- +- path_max = (unsigned) PATH_MAX; +- path_max += 2; /* The getcwd docs say to do this. */ +- +- dirname = (char *) alloca (path_max + dirname_len); +- ADD_BLOCK (block_list, dirname); +- +- __set_errno (0); +- while ((ret = getcwd (dirname, path_max)) == NULL && errno == ERANGE) +- { +- path_max += PATH_INCR; +- dirname = (char *) alloca (path_max + dirname_len); +- ADD_BLOCK (block_list, dirname); +- __set_errno (0); +- } +- +- if (ret == NULL) +- { +- /* We cannot get the current working directory. Don't signal an +- error but simply return the default string. */ +- FREE_BLOCKS (block_list); +- __set_errno (saved_errno); +- return (char *) msgid; +- } +- +- stpcpy (stpcpy (strchr (dirname, '\0'), "/"), binding->dirname); +- } +- +- /* Now determine the symbolic name of CATEGORY and its value. */ +- categoryname = category_to_name (category); +- categoryvalue = guess_category_value (category, categoryname); +- +- xdomainname = (char *) alloca (strlen (categoryname) +- + strlen (domainname) + 5); +- ADD_BLOCK (block_list, xdomainname); +- +- stpcpy (stpcpy (stpcpy (stpcpy (xdomainname, categoryname), "/"), +- domainname), +- ".mo"); +- +- /* Creating working area. */ +- single_locale = (char *) alloca (strlen (categoryvalue) + 1); +- ADD_BLOCK (block_list, single_locale); +- +- +- /* Search for the given string. This is a loop because we perhaps +- got an ordered list of languages to consider for th translation. */ +- while (1) +- { +- /* Make CATEGORYVALUE point to the next element of the list. */ +- while (categoryvalue[0] != '\0' && categoryvalue[0] == ':') +- ++categoryvalue; +- if (categoryvalue[0] == '\0') +- { +- /* The whole contents of CATEGORYVALUE has been searched but +- no valid entry has been found. We solve this situation +- by implicitly appending a "C" entry, i.e. no translation +- will take place. */ +- single_locale[0] = 'C'; +- single_locale[1] = '\0'; +- } +- else +- { +- char *cp = single_locale; +- while (categoryvalue[0] != '\0' && categoryvalue[0] != ':') +- *cp++ = *categoryvalue++; +- *cp = '\0'; +- } +- +- /* If the current locale value is C (or POSIX) we don't load a +- domain. Return the MSGID. */ +- if (strcmp (single_locale, "C") == 0 +- || strcmp (single_locale, "POSIX") == 0) +- { +- FREE_BLOCKS (block_list); +- __set_errno (saved_errno); +- return (char *) msgid; +- } +- +- +- /* Find structure describing the message catalog matching the +- DOMAINNAME and CATEGORY. */ +- domain = _nl_find_domain (dirname, single_locale, xdomainname); +- +- if (domain != NULL) +- { +- retval = find_msg (domain, msgid); +- +- if (retval == NULL) +- { +- int cnt; +- +- for (cnt = 0; domain->successor[cnt] != NULL; ++cnt) +- { +- retval = find_msg (domain->successor[cnt], msgid); +- +- if (retval != NULL) +- break; +- } +- } +- +- if (retval != NULL) +- { +- FREE_BLOCKS (block_list); +- __set_errno (saved_errno); +- return retval; +- } +- } +- } +- /* NOTREACHED */ +-} +- +-#ifdef _LIBC +-/* Alias for function name in GNU C Library. */ +-weak_alias (__dcgettext, dcgettext); +-#endif +- +- +-static char * +-find_msg (domain_file, msgid) +- struct loaded_l10nfile *domain_file; +- const char *msgid; +-{ +- size_t top, act, bottom; +- struct loaded_domain *domain; +- +- if (domain_file->decided == 0) +- _nl_load_domain (domain_file); +- +- if (domain_file->data == NULL) +- return NULL; +- +- domain = (struct loaded_domain *) domain_file->data; +- +- /* Locate the MSGID and its translation. */ +- if (domain->hash_size > 2 && domain->hash_tab != NULL) +- { +- /* Use the hashing table. */ +- nls_uint32 len = strlen (msgid); +- nls_uint32 hash_val = hash_string (msgid); +- nls_uint32 idx = hash_val % domain->hash_size; +- nls_uint32 incr = 1 + (hash_val % (domain->hash_size - 2)); +- nls_uint32 nstr = W (domain->must_swap, domain->hash_tab[idx]); +- +- if (nstr == 0) +- /* Hash table entry is empty. */ +- return NULL; +- +- if (W (domain->must_swap, domain->orig_tab[nstr - 1].length) == len +- && strcmp (msgid, +- domain->data + W (domain->must_swap, +- domain->orig_tab[nstr - 1].offset)) == 0) +- return (char *) domain->data + W (domain->must_swap, +- domain->trans_tab[nstr - 1].offset); +- +- while (1) +- { +- if (idx >= domain->hash_size - incr) +- idx -= domain->hash_size - incr; +- else +- idx += incr; +- +- nstr = W (domain->must_swap, domain->hash_tab[idx]); +- if (nstr == 0) +- /* Hash table entry is empty. */ +- return NULL; +- +- if (W (domain->must_swap, domain->orig_tab[nstr - 1].length) == len +- && strcmp (msgid, +- domain->data + W (domain->must_swap, +- domain->orig_tab[nstr - 1].offset)) +- == 0) +- return (char *) domain->data +- + W (domain->must_swap, domain->trans_tab[nstr - 1].offset); +- } +- /* NOTREACHED */ +- } +- +- /* Now we try the default method: binary search in the sorted +- array of messages. */ +- bottom = 0; +- top = domain->nstrings; +- while (bottom < top) +- { +- int cmp_val; +- +- act = (bottom + top) / 2; +- cmp_val = strcmp (msgid, domain->data +- + W (domain->must_swap, +- domain->orig_tab[act].offset)); +- if (cmp_val < 0) +- top = act; +- else if (cmp_val > 0) +- bottom = act + 1; +- else +- break; +- } +- +- /* If an translation is found return this. */ +- return bottom >= top ? NULL : (char *) domain->data +- + W (domain->must_swap, +- domain->trans_tab[act].offset); +-} +- +- +-/* Return string representation of locale CATEGORY. */ +-static const char * +-category_to_name (category) +- int category; +-{ +- const char *retval; +- +- switch (category) +- { +-#ifdef LC_COLLATE +- case LC_COLLATE: +- retval = "LC_COLLATE"; +- break; +-#endif +-#ifdef LC_CTYPE +- case LC_CTYPE: +- retval = "LC_CTYPE"; +- break; +-#endif +-#ifdef LC_MONETARY +- case LC_MONETARY: +- retval = "LC_MONETARY"; +- break; +-#endif +-#ifdef LC_NUMERIC +- case LC_NUMERIC: +- retval = "LC_NUMERIC"; +- break; +-#endif +-#ifdef LC_TIME +- case LC_TIME: +- retval = "LC_TIME"; +- break; +-#endif +-#ifdef LC_MESSAGES +- case LC_MESSAGES: +- retval = "LC_MESSAGES"; +- break; +-#endif +-#ifdef LC_RESPONSE +- case LC_RESPONSE: +- retval = "LC_RESPONSE"; +- break; +-#endif +-#ifdef LC_ALL +- case LC_ALL: +- /* This might not make sense but is perhaps better than any other +- value. */ +- retval = "LC_ALL"; +- break; +-#endif +- default: +- /* If you have a better idea for a default value let me know. */ +- retval = "LC_XXX"; +- } +- +- return retval; +-} +- +-/* Guess value of current locale from value of the environment variables. */ +-static const char * +-guess_category_value (category, categoryname) +- int category; +- const char *categoryname; +-{ +- const char *retval; +- +- /* The highest priority value is the `LANGUAGE' environment +- variable. This is a GNU extension. */ +- retval = getenv ("LANGUAGE"); +- if (retval != NULL && retval[0] != '\0') +- return retval; +- +- /* `LANGUAGE' is not set. So we have to proceed with the POSIX +- methods of looking to `LC_ALL', `LC_xxx', and `LANG'. On some +- systems this can be done by the `setlocale' function itself. */ +-#if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES && defined HAVE_LOCALE_NULL +- return setlocale (category, NULL); +-#else +- /* Setting of LC_ALL overwrites all other. */ +- retval = getenv ("LC_ALL"); +- if (retval != NULL && retval[0] != '\0') +- return retval; +- +- /* Next comes the name of the desired category. */ +- retval = getenv (categoryname); +- if (retval != NULL && retval[0] != '\0') +- return retval; +- +- /* Last possibility is the LANG environment variable. */ +- retval = getenv ("LANG"); +- if (retval != NULL && retval[0] != '\0') +- return retval; +- +- /* We use C as the default domain. POSIX says this is implementation +- defined. */ +- return "C"; +-#endif +-} +- +-/* @@ begin of epilog @@ */ +- +-/* We don't want libintl.a to depend on any other library. So we +- avoid the non-standard function stpcpy. In GNU C Library this +- function is available, though. Also allow the symbol HAVE_STPCPY +- to be defined. */ +-#if !_LIBC && !HAVE_STPCPY +-static char * +-stpcpy (dest, src) +- char *dest; +- const char *src; +-{ +- while ((*dest++ = *src++) != '\0') +- /* Do nothing. */ ; +- return dest - 1; +-} +-#endif +diff -uprN clean/lrzsz-0.12.20/intl/dgettext.c lrzsz-0.12.20/intl/dgettext.c +--- clean/lrzsz-0.12.20/intl/dgettext.c 1998-04-26 14:20:52.000000000 +0100 ++++ lrzsz-0.12.20/intl/dgettext.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,59 +0,0 @@ +-/* dgettext.c -- implementation of the dgettext(3) function +- Copyright (C) 1995 Software Foundation, Inc. +- +-This program is free software; you can redistribute it and/or modify +-it under the terms of the GNU General Public License as published by +-the Free Software Foundation; either version 2, or (at your option) +-any later version. +- +-This program is distributed in the hope that it will be useful, +-but WITHOUT ANY WARRANTY; without even the implied warranty of +-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-GNU General Public License for more details. +- +-You should have received a copy of the GNU General Public License +-along with this program; if not, write to the Free Software +-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +- +-#ifdef HAVE_CONFIG_H +-# include <config.h> +-#endif +- +-#if defined HAVE_LOCALE_H || defined _LIBC +-# include <locale.h> +-#endif +- +-#ifdef _LIBC +-# include <libintl.h> +-#else +-# include "libgettext.h" +-#endif +- +-/* @@ end of prolog @@ */ +- +-/* Names for the libintl functions are a problem. They must not clash +- with existing names and they should follow ANSI C. But this source +- code is also used in GNU C Library where the names have a __ +- prefix. So we have to make a difference here. */ +-#ifdef _LIBC +-# define DGETTEXT __dgettext +-# define DCGETTEXT __dcgettext +-#else +-# define DGETTEXT dgettext__ +-# define DCGETTEXT dcgettext__ +-#endif +- +-/* Look up MSGID in the DOMAINNAME message catalog of the current +- LC_MESSAGES locale. */ +-char * +-DGETTEXT (domainname, msgid) +- const char *domainname; +- const char *msgid; +-{ +- return DCGETTEXT (domainname, msgid, LC_MESSAGES); +-} +- +-#ifdef _LIBC +-/* Alias for function name in GNU C Library. */ +-weak_alias (__dgettext, dgettext); +-#endif +diff -uprN clean/lrzsz-0.12.20/intl/explodename.c lrzsz-0.12.20/intl/explodename.c +--- clean/lrzsz-0.12.20/intl/explodename.c 1998-04-26 14:22:37.000000000 +0100 ++++ lrzsz-0.12.20/intl/explodename.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,181 +0,0 @@ +-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc. +- Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995. +- +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2, or (at your option) +- any later version. +- +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. +- +- You should have received a copy of the GNU General Public License +- along with this program; if not, write to the Free Software Foundation, +- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +- +-#ifdef HAVE_CONFIG_H +-# include <config.h> +-#endif +- +-#include <stdlib.h> +-#include <string.h> +-#include <sys/types.h> +- +-#include "loadinfo.h" +- +-/* On some strange systems still no definition of NULL is found. Sigh! */ +-#ifndef NULL +-# if defined __STDC__ && __STDC__ +-# define NULL ((void *) 0) +-# else +-# define NULL 0 +-# endif +-#endif +- +-/* @@ end of prolog @@ */ +- +-int +-_nl_explode_name (name, language, modifier, territory, codeset, +- normalized_codeset, special, sponsor, revision) +- char *name; +- const char **language; +- const char **modifier; +- const char **territory; +- const char **codeset; +- const char **normalized_codeset; +- const char **special; +- const char **sponsor; +- const char **revision; +-{ +- enum { undecided, xpg, cen } syntax; +- char *cp; +- int mask; +- +- *modifier = NULL; +- *territory = NULL; +- *codeset = NULL; +- *normalized_codeset = NULL; +- *special = NULL; +- *sponsor = NULL; +- *revision = NULL; +- +- /* Now we determine the single parts of the locale name. First +- look for the language. Termination symbols are `_' and `@' if +- we use XPG4 style, and `_', `+', and `,' if we use CEN syntax. */ +- mask = 0; +- syntax = undecided; +- *language = cp = name; +- while (cp[0] != '\0' && cp[0] != '_' && cp[0] != '@' +- && cp[0] != '+' && cp[0] != ',') +- ++cp; +- +- if (*language == cp) +- /* This does not make sense: language has to be specified. Use +- this entry as it is without exploding. Perhaps it is an alias. */ +- cp = strchr (*language, '\0'); +- else if (cp[0] == '_') +- { +- /* Next is the territory. */ +- cp[0] = '\0'; +- *territory = ++cp; +- +- while (cp[0] != '\0' && cp[0] != '.' && cp[0] != '@' +- && cp[0] != '+' && cp[0] != ',' && cp[0] != '_') +- ++cp; +- +- mask |= TERRITORY; +- +- if (cp[0] == '.') +- { +- /* Next is the codeset. */ +- syntax = xpg; +- cp[0] = '\0'; +- *codeset = ++cp; +- +- while (cp[0] != '\0' && cp[0] != '@') +- ++cp; +- +- mask |= XPG_CODESET; +- +- if (*codeset != cp && (*codeset)[0] != '\0') +- { +- *normalized_codeset = _nl_normalize_codeset (*codeset, +- cp - *codeset); +- if (strcmp (*codeset, *normalized_codeset) == 0) +- free ((char *) *normalized_codeset); +- else +- mask |= XPG_NORM_CODESET; +- } +- } +- } +- +- if (cp[0] == '@' || (syntax != xpg && cp[0] == '+')) +- { +- /* Next is the modifier. */ +- syntax = cp[0] == '@' ? xpg : cen; +- cp[0] = '\0'; +- *modifier = ++cp; +- +- while (syntax == cen && cp[0] != '\0' && cp[0] != '+' +- && cp[0] != ',' && cp[0] != '_') +- ++cp; +- +- mask |= XPG_MODIFIER | CEN_AUDIENCE; +- } +- +- if (syntax != xpg && (cp[0] == '+' || cp[0] == ',' || cp[0] == '_')) +- { +- syntax = cen; +- +- if (cp[0] == '+') +- { +- /* Next is special application (CEN syntax). */ +- cp[0] = '\0'; +- *special = ++cp; +- +- while (cp[0] != '\0' && cp[0] != ',' && cp[0] != '_') +- ++cp; +- +- mask |= CEN_SPECIAL; +- } +- +- if (cp[0] == ',') +- { +- /* Next is sponsor (CEN syntax). */ +- cp[0] = '\0'; +- *sponsor = ++cp; +- +- while (cp[0] != '\0' && cp[0] != '_') +- ++cp; +- +- mask |= CEN_SPONSOR; +- } +- +- if (cp[0] == '_') +- { +- /* Next is revision (CEN syntax). */ +- cp[0] = '\0'; +- *revision = ++cp; +- +- mask |= CEN_REVISION; +- } +- } +- +- /* For CEN syntax values it might be important to have the +- separator character in the file name, not for XPG syntax. */ +- if (syntax == xpg) +- { +- if (*territory != NULL && (*territory)[0] == '\0') +- mask &= ~TERRITORY; +- +- if (*codeset != NULL && (*codeset)[0] == '\0') +- mask &= ~XPG_CODESET; +- +- if (*modifier != NULL && (*modifier)[0] == '\0') +- mask &= ~XPG_MODIFIER; +- } +- +- return mask; +-} +diff -uprN clean/lrzsz-0.12.20/intl/finddomain.c lrzsz-0.12.20/intl/finddomain.c +--- clean/lrzsz-0.12.20/intl/finddomain.c 1998-04-26 14:22:36.000000000 +0100 ++++ lrzsz-0.12.20/intl/finddomain.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,189 +0,0 @@ +-/* Handle list of needed message catalogs +- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc. +- Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995. +- +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2, or (at your option) +- any later version. +- +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. +- +- You should have received a copy of the GNU General Public License +- along with this program; if not, write to the Free Software Foundation, +- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +- +-#ifdef HAVE_CONFIG_H +-# include <config.h> +-#endif +- +-#include <ctype.h> +-#include <errno.h> +-#include <stdio.h> +-#include <sys/types.h> +- +-#if defined STDC_HEADERS || defined _LIBC +-# include <stdlib.h> +-#else +-# ifdef HAVE_MALLOC_H +-# include <malloc.h> +-# else +-void free (); +-# endif +-#endif +- +-#if defined HAVE_STRING_H || defined _LIBC +-# include <string.h> +-#else +-# include <strings.h> +-# ifndef memcpy +-# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num) +-# endif +-#endif +-#if !HAVE_STRCHR && !defined _LIBC +-# ifndef strchr +-# define strchr index +-# endif +-#endif +- +-#if defined HAVE_UNISTD_H || defined _LIBC +-# include <unistd.h> +-#endif +- +-#include "gettext.h" +-#include "gettextP.h" +-#ifdef _LIBC +-# include <libintl.h> +-#else +-# include "libgettext.h" +-#endif +- +-/* @@ end of prolog @@ */ +-/* List of already loaded domains. */ +-static struct loaded_l10nfile *_nl_loaded_domains; +- +- +-/* Return a data structure describing the message catalog described by +- the DOMAINNAME and CATEGORY parameters with respect to the currently +- established bindings. */ +-struct loaded_l10nfile * +-_nl_find_domain (dirname, locale, domainname) +- const char *dirname; +- char *locale; +- const char *domainname; +-{ +- struct loaded_l10nfile *retval; +- const char *language; +- const char *modifier; +- const char *territory; +- const char *codeset; +- const char *normalized_codeset; +- const char *special; +- const char *sponsor; +- const char *revision; +- const char *alias_value; +- int mask; +- +- /* LOCALE can consist of up to four recognized parts for the XPG syntax: +- +- language[_territory[.codeset]][@modifier] +- +- and six parts for the CEN syntax: +- +- language[_territory][+audience][+special][,[sponsor][_revision]] +- +- Beside the first all of them are allowed to be missing. If the +- full specified locale is not found, the less specific one are +- looked for. The various part will be stripped of according to +- the following order: +- (1) revision +- (2) sponsor +- (3) special +- (4) codeset +- (5) normalized codeset +- (6) territory +- (7) audience/modifier +- */ +- +- /* If we have already tested for this locale entry there has to +- be one data set in the list of loaded domains. */ +- retval = _nl_make_l10nflist (&_nl_loaded_domains, dirname, +- strlen (dirname) + 1, 0, locale, NULL, NULL, +- NULL, NULL, NULL, NULL, NULL, domainname, 0); +- if (retval != NULL) +- { +- /* We know something about this locale. */ +- int cnt; +- +- if (retval->decided == 0) +- _nl_load_domain (retval); +- +- if (retval->data != NULL) +- return retval; +- +- for (cnt = 0; retval->successor[cnt] != NULL; ++cnt) +- { +- if (retval->successor[cnt]->decided == 0) +- _nl_load_domain (retval->successor[cnt]); +- +- if (retval->successor[cnt]->data != NULL) +- break; +- } +- return cnt >= 0 ? retval : NULL; +- /* NOTREACHED */ +- } +- +- /* See whether the locale value is an alias. If yes its value +- *overwrites* the alias name. No test for the original value is +- done. */ +- alias_value = _nl_expand_alias (locale); +- if (alias_value != NULL) +- { +- size_t len = strlen (alias_value) + 1; +- locale = (char *) malloc (len); +- if (locale == NULL) +- return NULL; +- +- memcpy (locale, alias_value, len); +- } +- +- /* Now we determine the single parts of the locale name. First +- look for the language. Termination symbols are `_' and `@' if +- we use XPG4 style, and `_', `+', and `,' if we use CEN syntax. */ +- mask = _nl_explode_name (locale, &language, &modifier, &territory, +- &codeset, &normalized_codeset, &special, +- &sponsor, &revision); +- +- /* Create all possible locale entries which might be interested in +- generalization. */ +- retval = _nl_make_l10nflist (&_nl_loaded_domains, dirname, +- strlen (dirname) + 1, mask, language, territory, +- codeset, normalized_codeset, modifier, special, +- sponsor, revision, domainname, 1); +- if (retval == NULL) +- /* This means we are out of core. */ +- return NULL; +- +- if (retval->decided == 0) +- _nl_load_domain (retval); +- if (retval->data == NULL) +- { +- int cnt; +- for (cnt = 0; retval->successor[cnt] != NULL; ++cnt) +- { +- if (retval->successor[cnt]->decided == 0) +- _nl_load_domain (retval->successor[cnt]); +- if (retval->successor[cnt]->data != NULL) +- break; +- } +- } +- +- /* The room for an alias was dynamically allocated. Free it now. */ +- if (alias_value != NULL) +- free (locale); +- +- return retval; +-} +diff -uprN clean/lrzsz-0.12.20/intl/gettext.c lrzsz-0.12.20/intl/gettext.c +--- clean/lrzsz-0.12.20/intl/gettext.c 1998-04-26 14:22:36.000000000 +0100 ++++ lrzsz-0.12.20/intl/gettext.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,70 +0,0 @@ +-/* Implementation of gettext(3) function +- Copyright (C) 1995, 1997 Free Software Foundation, Inc. +- +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2, or (at your option) +- any later version. +- +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. +- +- You should have received a copy of the GNU General Public License +- along with this program; if not, write to the Free Software Foundation, +- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +- +-#ifdef HAVE_CONFIG_H +-# include <config.h> +-#endif +- +-#ifdef _LIBC +-# define __need_NULL +-# include <stddef.h> +-#else +-# ifdef STDC_HEADERS +-# include <stdlib.h> /* Just for NULL. */ +-# else +-# ifdef HAVE_STRING_H +-# include <string.h> +-# else +-# define NULL ((void *) 0) +-# endif +-# endif +-#endif +- +-#ifdef _LIBC +-# include <libintl.h> +-#else +-# include "libgettext.h" +-#endif +- +-/* @@ end of prolog @@ */ +- +-/* Names for the libintl functions are a problem. They must not clash +- with existing names and they should follow ANSI C. But this source +- code is also used in GNU C Library where the names have a __ +- prefix. So we have to make a difference here. */ +-#ifdef _LIBC +-# define GETTEXT __gettext +-# define DGETTEXT __dgettext +-#else +-# define GETTEXT gettext__ +-# define DGETTEXT dgettext__ +-#endif +- +-/* Look up MSGID in the current default message catalog for the current +- LC_MESSAGES locale. If not found, returns MSGID itself (the default +- text). */ +-char * +-GETTEXT (msgid) +- const char *msgid; +-{ +- return DGETTEXT (NULL, msgid); +-} +- +-#ifdef _LIBC +-/* Alias for function name in GNU C Library. */ +-weak_alias (__gettext, gettext); +-#endif +diff -uprN clean/lrzsz-0.12.20/intl/gettext.h lrzsz-0.12.20/intl/gettext.h +--- clean/lrzsz-0.12.20/intl/gettext.h 1998-04-26 14:22:35.000000000 +0100 ++++ lrzsz-0.12.20/intl/gettext.h 1970-01-01 01:00:00.000000000 +0100 +@@ -1,105 +0,0 @@ +-/* Internal header for GNU gettext internationalization functions +- Copyright (C) 1995, 1997 Free Software Foundation, Inc. +- +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2, or (at your option) +- any later version. +- +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. +- +- You should have received a copy of the GNU Library General Public +- License along with the GNU C Library; see the file COPYING.LIB. If not, +- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, +- Boston, MA 02111-1307, USA. */ +- +-#ifndef _GETTEXT_H +-#define _GETTEXT_H 1 +- +-#include <stdio.h> +- +-#if HAVE_LIMITS_H || _LIBC +-# include <limits.h> +-#endif +- +-/* @@ end of prolog @@ */ +- +-/* The magic number of the GNU message catalog format. */ +-#define _MAGIC 0x950412de +-#define _MAGIC_SWAPPED 0xde120495 +- +-/* Revision number of the currently used .mo (binary) file format. */ +-#define MO_REVISION_NUMBER 0 +- +-/* The following contortions are an attempt to use the C preprocessor +- to determine an unsigned integral type that is 32 bits wide. An +- alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but +- doing that would require that the configure script compile and *run* +- the resulting executable. Locally running cross-compiled executables +- is usually not possible. */ +- +-#if __STDC__ +-# define UINT_MAX_32_BITS 4294967295U +-#else +-# define UINT_MAX_32_BITS 0xFFFFFFFF +-#endif +- +-/* If UINT_MAX isn't defined, assume it's a 32-bit type. +- This should be valid for all systems GNU cares about because +- that doesn't include 16-bit systems, and only modern systems +- (that certainly have <limits.h>) have 64+-bit integral types. */ +- +-#ifndef UINT_MAX +-# define UINT_MAX UINT_MAX_32_BITS +-#endif +- +-#if UINT_MAX == UINT_MAX_32_BITS +-typedef unsigned nls_uint32; +-#else +-# if USHRT_MAX == UINT_MAX_32_BITS +-typedef unsigned short nls_uint32; +-# else +-# if ULONG_MAX == UINT_MAX_32_BITS +-typedef unsigned long nls_uint32; +-# else +- /* The following line is intended to throw an error. Using #error is +- not portable enough. */ +- "Cannot determine unsigned 32-bit data type." +-# endif +-# endif +-#endif +- +- +-/* Header for binary .mo file format. */ +-struct mo_file_header +-{ +- /* The magic number. */ +- nls_uint32 magic; +- /* The revision number of the file format. */ +- nls_uint32 revision; +- /* The number of strings pairs. */ +- nls_uint32 nstrings; +- /* Offset of table with start offsets of original strings. */ +- nls_uint32 orig_tab_offset; +- /* Offset of table with start offsets of translation strings. */ +- nls_uint32 trans_tab_offset; +- /* Size of hashing table. */ +- nls_uint32 hash_tab_size; +- /* Offset of first hashing entry. */ +- nls_uint32 hash_tab_offset; +-}; +- +-struct string_desc +-{ +- /* Length of addressed string. */ +- nls_uint32 length; +- /* Offset of string in file. */ +- nls_uint32 offset; +-}; +- +-/* @@ begin of epilog @@ */ +- +-#endif /* gettext.h */ +diff -uprN clean/lrzsz-0.12.20/intl/gettextP.h lrzsz-0.12.20/intl/gettextP.h +--- clean/lrzsz-0.12.20/intl/gettextP.h 1998-04-26 14:22:35.000000000 +0100 ++++ lrzsz-0.12.20/intl/gettextP.h 1970-01-01 01:00:00.000000000 +0100 +@@ -1,73 +0,0 @@ +-/* Header describing internals of gettext library +- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc. +- +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2, or (at your option) +- any later version. +- +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. +- +- You should have received a copy of the GNU General Public License +- along with this program; if not, write to the Free Software Foundation, +- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +- +-#ifndef _GETTEXTP_H +-#define _GETTEXTP_H +- +-#include "loadinfo.h" +- +-/* @@ end of prolog @@ */ +- +-#ifndef PARAMS +-# if __STDC__ +-# define PARAMS(args) args +-# else +-# define PARAMS(args) () +-# endif +-#endif +- +-#ifndef W +-# define W(flag, data) ((flag) ? SWAP (data) : (data)) +-#endif +- +- +-static nls_uint32 SWAP PARAMS ((nls_uint32 i)); +- +-static inline nls_uint32 +-SWAP (i) +- nls_uint32 i; +-{ +- return (i << 24) | ((i & 0xff00) << 8) | ((i >> 8) & 0xff00) | (i >> 24); +-} +- +- +-struct loaded_domain +-{ +- const char *data; +- int must_swap; +- nls_uint32 nstrings; +- struct string_desc *orig_tab; +- struct string_desc *trans_tab; +- nls_uint32 hash_size; +- nls_uint32 *hash_tab; +-}; +- +-struct binding +-{ +- struct binding *next; +- char *domainname; +- char *dirname; +-}; +- +-struct loaded_l10nfile *_nl_find_domain PARAMS ((const char *__dirname, +- char *__locale, +- const char *__domainname)); +-void _nl_load_domain PARAMS ((struct loaded_l10nfile *__domain)); +- +-/* @@ begin of epilog @@ */ +- +-#endif /* gettextP.h */ +diff -uprN clean/lrzsz-0.12.20/intl/hash-string.h lrzsz-0.12.20/intl/hash-string.h +--- clean/lrzsz-0.12.20/intl/hash-string.h 1998-04-26 14:22:36.000000000 +0100 ++++ lrzsz-0.12.20/intl/hash-string.h 1970-01-01 01:00:00.000000000 +0100 +@@ -1,63 +0,0 @@ +-/* Implements a string hashing function. +- Copyright (C) 1995, 1997 Free Software Foundation, Inc. +- +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2, or (at your option) +- any later version. +- +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. +- +- You should have received a copy of the GNU Library General Public +- License along with the GNU C Library; see the file COPYING.LIB. If not, +- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, +- Boston, MA 02111-1307, USA. */ +- +-#ifdef HAVE_VALUES_H +-# include <values.h> +-#endif +- +-/* @@ end of prolog @@ */ +- +-#ifndef PARAMS +-# if __STDC__ +-# define PARAMS(Args) Args +-# else +-# define PARAMS(Args) () +-# endif +-#endif +- +-/* We assume to have `unsigned long int' value with at least 32 bits. */ +-#define HASHWORDBITS 32 +- +- +-/* Defines the so called `hashpjw' function by P.J. Weinberger +- [see Aho/Sethi/Ullman, COMPILERS: Principles, Techniques and Tools, +- 1986, 1987 Bell Telephone Laboratories, Inc.] */ +-static unsigned long hash_string PARAMS ((const char *__str_param)); +- +-static inline unsigned long +-hash_string (str_param) +- const char *str_param; +-{ +- unsigned long int hval, g; +- const char *str = str_param; +- +- /* Compute the hash value for the given string. */ +- hval = 0; +- while (*str != '\0') +- { +- hval <<= 4; +- hval += (unsigned long) *str++; +- g = hval & ((unsigned long) 0xf << (HASHWORDBITS - 4)); +- if (g != 0) +- { +- hval ^= g >> (HASHWORDBITS - 8); +- hval ^= g; +- } +- } +- return hval; +-} +diff -uprN clean/lrzsz-0.12.20/intl/intl-compat.c lrzsz-0.12.20/intl/intl-compat.c +--- clean/lrzsz-0.12.20/intl/intl-compat.c 1998-04-26 14:20:52.000000000 +0100 ++++ lrzsz-0.12.20/intl/intl-compat.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,76 +0,0 @@ +-/* intl-compat.c - Stub functions to call gettext functions from GNU gettext +- Library. +- Copyright (C) 1995 Software Foundation, Inc. +- +-This program is free software; you can redistribute it and/or modify +-it under the terms of the GNU General Public License as published by +-the Free Software Foundation; either version 2, or (at your option) +-any later version. +- +-This program is distributed in the hope that it will be useful, +-but WITHOUT ANY WARRANTY; without even the implied warranty of +-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-GNU General Public License for more details. +- +-You should have received a copy of the GNU General Public License +-along with this program; if not, write to the Free Software +-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +- +-#ifdef HAVE_CONFIG_H +-# include <config.h> +-#endif +- +-#include "libgettext.h" +- +-/* @@ end of prolog @@ */ +- +- +-#undef gettext +-#undef dgettext +-#undef dcgettext +-#undef textdomain +-#undef bindtextdomain +- +- +-char * +-bindtextdomain (domainname, dirname) +- const char *domainname; +- const char *dirname; +-{ +- return bindtextdomain__ (domainname, dirname); +-} +- +- +-char * +-dcgettext (domainname, msgid, category) +- const char *domainname; +- const char *msgid; +- int category; +-{ +- return dcgettext__ (domainname, msgid, category); +-} +- +- +-char * +-dgettext (domainname, msgid) +- const char *domainname; +- const char *msgid; +-{ +- return dgettext__ (domainname, msgid); +-} +- +- +-char * +-gettext (msgid) +- const char *msgid; +-{ +- return gettext__ (msgid); +-} +- +- +-char * +-textdomain (domainname) +- const char *domainname; +-{ +- return textdomain__ (domainname); +-} +diff -uprN clean/lrzsz-0.12.20/intl/l10nflist.c lrzsz-0.12.20/intl/l10nflist.c +--- clean/lrzsz-0.12.20/intl/l10nflist.c 1998-04-26 14:22:37.000000000 +0100 ++++ lrzsz-0.12.20/intl/l10nflist.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,409 +0,0 @@ +-/* Handle list of needed message catalogs +- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc. +- Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995. +- +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2, or (at your option) +- any later version. +- +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. +- +- You should have received a copy of the GNU General Public License +- along with this program; if not, write to the Free Software Foundation, +- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +- +-#ifdef HAVE_CONFIG_H +-# include <config.h> +-#endif +- +- +-#if defined HAVE_STRING_H || defined _LIBC +-# ifndef _GNU_SOURCE +-# define _GNU_SOURCE 1 +-# endif +-# include <string.h> +-#else +-# include <strings.h> +-# ifndef memcpy +-# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num) +-# endif +-#endif +-#if !HAVE_STRCHR && !defined _LIBC +-# ifndef strchr +-# define strchr index +-# endif +-#endif +- +-#if defined _LIBC || defined HAVE_ARGZ_H +-# include <argz.h> +-#endif +-#include <ctype.h> +-#include <sys/types.h> +- +-#if defined STDC_HEADERS || defined _LIBC +-# include <stdlib.h> +-#endif +- +-#include "loadinfo.h" +- +-/* On some strange systems still no definition of NULL is found. Sigh! */ +-#ifndef NULL +-# if defined __STDC__ && __STDC__ +-# define NULL ((void *) 0) +-# else +-# define NULL 0 +-# endif +-#endif +- +-/* @@ end of prolog @@ */ +- +-#ifdef _LIBC +-/* Rename the non ANSI C functions. This is required by the standard +- because some ANSI C functions will require linking with this object +- file and the name space must not be polluted. */ +-# define stpcpy(dest, src) __stpcpy(dest, src) +-#else +-# ifndef HAVE_STPCPY +-static char *stpcpy PARAMS ((char *dest, const char *src)); +-# endif +-#endif +- +-/* Define function which are usually not available. */ +- +-#if !defined _LIBC && !defined HAVE___ARGZ_COUNT +-/* Returns the number of strings in ARGZ. */ +-static size_t argz_count__ PARAMS ((const char *argz, size_t len)); +- +-static size_t +-argz_count__ (argz, len) +- const char *argz; +- size_t len; +-{ +- size_t count = 0; +- while (len > 0) +- { +- size_t part_len = strlen (argz); +- argz += part_len + 1; +- len -= part_len + 1; +- count++; +- } +- return count; +-} +-# undef __argz_count +-# define __argz_count(argz, len) argz_count__ (argz, len) +-#endif /* !_LIBC && !HAVE___ARGZ_COUNT */ +- +-#if !defined _LIBC && !defined HAVE___ARGZ_STRINGIFY +-/* Make '\0' separated arg vector ARGZ printable by converting all the '\0's +- except the last into the character SEP. */ +-static void argz_stringify__ PARAMS ((char *argz, size_t len, int sep)); +- +-static void +-argz_stringify__ (argz, len, sep) +- char *argz; +- size_t len; +- int sep; +-{ +- while (len > 0) +- { +- size_t part_len = strlen (argz); +- argz += part_len; +- len -= part_len + 1; +- if (len > 0) +- *argz++ = sep; +- } +-} +-# undef __argz_stringify +-# define __argz_stringify(argz, len, sep) argz_stringify__ (argz, len, sep) +-#endif /* !_LIBC && !HAVE___ARGZ_STRINGIFY */ +- +-#if !defined _LIBC && !defined HAVE___ARGZ_NEXT +-static char *argz_next__ PARAMS ((char *argz, size_t argz_len, +- const char *entry)); +- +-static char * +-argz_next__ (argz, argz_len, entry) +- char *argz; +- size_t argz_len; +- const char *entry; +-{ +- if (entry) +- { +- if (entry < argz + argz_len) +- entry = strchr (entry, '\0') + 1; +- +- return entry >= argz + argz_len ? NULL : (char *) entry; +- } +- else +- if (argz_len > 0) +- return argz; +- else +- return 0; +-} +-# undef __argz_next +-# define __argz_next(argz, len, entry) argz_next__ (argz, len, entry) +-#endif /* !_LIBC && !HAVE___ARGZ_NEXT */ +- +- +-/* Return number of bits set in X. */ +-static int pop PARAMS ((int x)); +- +-static inline int +-pop (x) +- int x; +-{ +- /* We assume that no more than 16 bits are used. */ +- x = ((x & ~0x5555) >> 1) + (x & 0x5555); +- x = ((x & ~0x3333) >> 2) + (x & 0x3333); +- x = ((x >> 4) + x) & 0x0f0f; +- x = ((x >> 8) + x) & 0xff; +- +- return x; +-} +- +- +-struct loaded_l10nfile * +-_nl_make_l10nflist (l10nfile_list, dirlist, dirlist_len, mask, language, +- territory, codeset, normalized_codeset, modifier, special, +- sponsor, revision, filename, do_allocate) +- struct loaded_l10nfile **l10nfile_list; +- const char *dirlist; +- size_t dirlist_len; +- int mask; +- const char *language; +- const char *territory; +- const char *codeset; +- const char *normalized_codeset; +- const char *modifier; +- const char *special; +- const char *sponsor; +- const char *revision; +- const char *filename; +- int do_allocate; +-{ +- char *abs_filename; +- struct loaded_l10nfile *last = NULL; +- struct loaded_l10nfile *retval; +- char *cp; +- size_t entries; +- int cnt; +- +- /* Allocate room for the full file name. */ +- abs_filename = (char *) malloc (dirlist_len +- + strlen (language) +- + ((mask & TERRITORY) != 0 +- ? strlen (territory) + 1 : 0) +- + ((mask & XPG_CODESET) != 0 +- ? strlen (codeset) + 1 : 0) +- + ((mask & XPG_NORM_CODESET) != 0 +- ? strlen (normalized_codeset) + 1 : 0) +- + (((mask & XPG_MODIFIER) != 0 +- || (mask & CEN_AUDIENCE) != 0) +- ? strlen (modifier) + 1 : 0) +- + ((mask & CEN_SPECIAL) != 0 +- ? strlen (special) + 1 : 0) +- + (((mask & CEN_SPONSOR) != 0 +- || (mask & CEN_REVISION) != 0) +- ? (1 + ((mask & CEN_SPONSOR) != 0 +- ? strlen (sponsor) + 1 : 0) +- + ((mask & CEN_REVISION) != 0 +- ? strlen (revision) + 1 : 0)) : 0) +- + 1 + strlen (filename) + 1); +- +- if (abs_filename == NULL) +- return NULL; +- +- retval = NULL; +- last = NULL; +- +- /* Construct file name. */ +- memcpy (abs_filename, dirlist, dirlist_len); +- __argz_stringify (abs_filename, dirlist_len, ':'); +- cp = abs_filename + (dirlist_len - 1); +- *cp++ = '/'; +- cp = stpcpy (cp, language); +- +- if ((mask & TERRITORY) != 0) +- { +- *cp++ = '_'; +- cp = stpcpy (cp, territory); +- } +- if ((mask & XPG_CODESET) != 0) +- { +- *cp++ = '.'; +- cp = stpcpy (cp, codeset); +- } +- if ((mask & XPG_NORM_CODESET) != 0) +- { +- *cp++ = '.'; +- cp = stpcpy (cp, normalized_codeset); +- } +- if ((mask & (XPG_MODIFIER | CEN_AUDIENCE)) != 0) +- { +- /* This component can be part of both syntaces but has different +- leading characters. For CEN we use `+', else `@'. */ +- *cp++ = (mask & CEN_AUDIENCE) != 0 ? '+' : '@'; +- cp = stpcpy (cp, modifier); +- } +- if ((mask & CEN_SPECIAL) != 0) +- { +- *cp++ = '+'; +- cp = stpcpy (cp, special); +- } +- if ((mask & (CEN_SPONSOR | CEN_REVISION)) != 0) +- { +- *cp++ = ','; +- if ((mask & CEN_SPONSOR) != 0) +- cp = stpcpy (cp, sponsor); +- if ((mask & CEN_REVISION) != 0) +- { +- *cp++ = '_'; +- cp = stpcpy (cp, revision); +- } +- } +- +- *cp++ = '/'; +- stpcpy (cp, filename); +- +- /* Look in list of already loaded domains whether it is already +- available. */ +- last = NULL; +- for (retval = *l10nfile_list; retval != NULL; retval = retval->next) +- if (retval->filename != NULL) +- { +- int compare = strcmp (retval->filename, abs_filename); +- if (compare == 0) +- /* We found it! */ +- break; +- if (compare < 0) +- { +- /* It's not in the list. */ +- retval = NULL; +- break; +- } +- +- last = retval; +- } +- +- if (retval != NULL || do_allocate == 0) +- { +- free (abs_filename); +- return retval; +- } +- +- retval = (struct loaded_l10nfile *) +- malloc (sizeof (*retval) + (__argz_count (dirlist, dirlist_len) +- * (1 << pop (mask)) +- * sizeof (struct loaded_l10nfile *))); +- if (retval == NULL) +- return NULL; +- +- retval->filename = abs_filename; +- retval->decided = (__argz_count (dirlist, dirlist_len) != 1 +- || ((mask & XPG_CODESET) != 0 +- && (mask & XPG_NORM_CODESET) != 0)); +- retval->data = NULL; +- +- if (last == NULL) +- { +- retval->next = *l10nfile_list; +- *l10nfile_list = retval; +- } +- else +- { +- retval->next = last->next; +- last->next = retval; +- } +- +- entries = 0; +- /* If the DIRLIST is a real list the RETVAL entry corresponds not to +- a real file. So we have to use the DIRLIST separation mechanism +- of the inner loop. */ +- cnt = __argz_count (dirlist, dirlist_len) == 1 ? mask - 1 : mask; +- for (; cnt >= 0; --cnt) +- if ((cnt & ~mask) == 0 +- && ((cnt & CEN_SPECIFIC) == 0 || (cnt & XPG_SPECIFIC) == 0) +- && ((cnt & XPG_CODESET) == 0 || (cnt & XPG_NORM_CODESET) == 0)) +- { +- /* Iterate over all elements of the DIRLIST. */ +- char *dir = NULL; +- +- while ((dir = __argz_next ((char *) dirlist, dirlist_len, dir)) +- != NULL) +- retval->successor[entries++] +- = _nl_make_l10nflist (l10nfile_list, dir, strlen (dir) + 1, cnt, +- language, territory, codeset, +- normalized_codeset, modifier, special, +- sponsor, revision, filename, 1); +- } +- retval->successor[entries] = NULL; +- +- return retval; +-} +- +-/* Normalize codeset name. There is no standard for the codeset +- names. Normalization allows the user to use any of the common +- names. */ +-const char * +-_nl_normalize_codeset (codeset, name_len) +- const char *codeset; +- size_t name_len; +-{ +- int len = 0; +- int only_digit = 1; +- char *retval; +- char *wp; +- size_t cnt; +- +- for (cnt = 0; cnt < name_len; ++cnt) +- if (isalnum (codeset[cnt])) +- { +- ++len; +- +- if (isalpha (codeset[cnt])) +- only_digit = 0; +- } +- +- retval = (char *) malloc ((only_digit ? 3 : 0) + len + 1); +- +- if (retval != NULL) +- { +- if (only_digit) +- wp = stpcpy (retval, "iso"); +- else +- wp = retval; +- +- for (cnt = 0; cnt < name_len; ++cnt) +- if (isalpha (codeset[cnt])) +- *wp++ = tolower (codeset[cnt]); +- else if (isdigit (codeset[cnt])) +- *wp++ = codeset[cnt]; +- +- *wp = '\0'; +- } +- +- return (const char *) retval; +-} +- +- +-/* @@ begin of epilog @@ */ +- +-/* We don't want libintl.a to depend on any other library. So we +- avoid the non-standard function stpcpy. In GNU C Library this +- function is available, though. Also allow the symbol HAVE_STPCPY +- to be defined. */ +-#if !_LIBC && !HAVE_STPCPY +-static char * +-stpcpy (dest, src) +- char *dest; +- const char *src; +-{ +- while ((*dest++ = *src++) != '\0') +- /* Do nothing. */ ; +- return dest - 1; +-} +-#endif +diff -uprN clean/lrzsz-0.12.20/intl/libgettext.h lrzsz-0.12.20/intl/libgettext.h +--- clean/lrzsz-0.12.20/intl/libgettext.h 1998-04-26 14:22:36.000000000 +0100 ++++ lrzsz-0.12.20/intl/libgettext.h 1970-01-01 01:00:00.000000000 +0100 +@@ -1,182 +0,0 @@ +-/* Message catalogs for internationalization. +- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc. +- +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2, or (at your option) +- any later version. +- +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. +- +- You should have received a copy of the GNU General Public License +- along with this program; if not, write to the Free Software Foundation, +- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +- +-/* Because on some systems (e.g. Solaris) we sometimes have to include +- the systems libintl.h as well as this file we have more complex +- include protection above. But the systems header might perhaps also +- define _LIBINTL_H and therefore we have to protect the definition here. */ +- +-#if !defined (_LIBINTL_H) || !defined (_LIBGETTEXT_H) +-#if !defined (_LIBINTL_H) +-# define _LIBINTL_H 1 +-#endif +-#define _LIBGETTEXT_H 1 +- +-/* We define an additional symbol to signal that we use the GNU +- implementation of gettext. */ +-#define __USE_GNU_GETTEXT 1 +- +-#include <sys/types.h> +- +-#if HAVE_LOCALE_H +-# include <locale.h> +-#endif +- +- +-#ifdef __cplusplus +-extern "C" { +-#endif +- +-/* @@ end of prolog @@ */ +- +-#ifndef PARAMS +-# if __STDC__ +-# define PARAMS(args) args +-# else +-# define PARAMS(args) () +-# endif +-#endif +- +-#ifndef NULL +-# if !defined __cplusplus || defined __GNUC__ +-# define NULL ((void *) 0) +-# else +-# define NULL (0) +-# endif +-#endif +- +-#if !HAVE_LC_MESSAGES +-/* This value determines the behaviour of the gettext() and dgettext() +- function. But some system does not have this defined. Define it +- to a default value. */ +-# define LC_MESSAGES (-1) +-#endif +- +- +-/* Declarations for gettext-using-catgets interface. Derived from +- Jim Meyering's libintl.h. */ +-struct _msg_ent +-{ +- const char *_msg; +- int _msg_number; +-}; +- +- +-#if HAVE_CATGETS +-/* These two variables are defined in the automatically by po-to-tbl.sed +- generated file `cat-id-tbl.c'. */ +-extern const struct _msg_ent _msg_tbl[]; +-extern int _msg_tbl_length; +-#endif +- +- +-/* For automatical extraction of messages sometimes no real +- translation is needed. Instead the string itself is the result. */ +-#define gettext_noop(Str) (Str) +- +-/* Look up MSGID in the current default message catalog for the current +- LC_MESSAGES locale. If not found, returns MSGID itself (the default +- text). */ +-extern char *gettext PARAMS ((const char *__msgid)); +-extern char *gettext__ PARAMS ((const char *__msgid)); +- +-/* Look up MSGID in the DOMAINNAME message catalog for the current +- LC_MESSAGES locale. */ +-extern char *dgettext PARAMS ((const char *__domainname, const char *__msgid)); +-extern char *dgettext__ PARAMS ((const char *__domainname, +- const char *__msgid)); +- +-/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY +- locale. */ +-extern char *dcgettext PARAMS ((const char *__domainname, const char *__msgid, +- int __category)); +-extern char *dcgettext__ PARAMS ((const char *__domainname, +- const char *__msgid, int __category)); +- +- +-/* Set the current default message catalog to DOMAINNAME. +- If DOMAINNAME is null, return the current default. +- If DOMAINNAME is "", reset to the default of "messages". */ +-extern char *textdomain PARAMS ((const char *__domainname)); +-extern char *textdomain__ PARAMS ((const char *__domainname)); +- +-/* Specify that the DOMAINNAME message catalog will be found +- in DIRNAME rather than in the system locale data base. */ +-extern char *bindtextdomain PARAMS ((const char *__domainname, +- const char *__dirname)); +-extern char *bindtextdomain__ PARAMS ((const char *__domainname, +- const char *__dirname)); +- +-#if ENABLE_NLS +- +-/* Solaris 2.3 has the gettext function but dcgettext is missing. +- So we omit this optimization for Solaris 2.3. BTW, Solaris 2.4 +- has dcgettext. */ +-# if !HAVE_CATGETS && (!HAVE_GETTEXT || HAVE_DCGETTEXT) +- +-# define gettext(Msgid) \ +- dgettext (NULL, Msgid) +- +-# define dgettext(Domainname, Msgid) \ +- dcgettext (Domainname, Msgid, LC_MESSAGES) +- +-# if defined __GNUC__ && __GNUC__ == 2 && __GNUC_MINOR__ >= 7 +-/* This global variable is defined in loadmsgcat.c. We need a sign, +- whether a new catalog was loaded, which can be associated with all +- translations. */ +-extern int _nl_msg_cat_cntr; +- +-# define dcgettext(Domainname, Msgid, Category) \ +- (__extension__ \ +- ({ \ +- char *__result; \ +- if (__builtin_constant_p (Msgid)) \ +- { \ +- static char *__translation__; \ +- static int __catalog_counter__; \ +- if (! __translation__ || __catalog_counter__ != _nl_msg_cat_cntr) \ +- { \ +- __translation__ = \ +- dcgettext__ (Domainname, Msgid, Category); \ +- __catalog_counter__ = _nl_msg_cat_cntr; \ +- } \ +- __result = __translation__; \ +- } \ +- else \ +- __result = dcgettext__ (Domainname, Msgid, Category); \ +- __result; \ +- })) +-# endif +-# endif +- +-#else +- +-# define gettext(Msgid) (Msgid) +-# define dgettext(Domainname, Msgid) (Msgid) +-# define dcgettext(Domainname, Msgid, Category) (Msgid) +-# define textdomain(Domainname) while (0) /* nothing */ +-# define bindtextdomain(Domainname, Dirname) while (0) /* nothing */ +- +-#endif +- +-/* @@ begin of epilog @@ */ +- +-#ifdef __cplusplus +-} +-#endif +- +-#endif +diff -uprN clean/lrzsz-0.12.20/intl/linux-msg.sed lrzsz-0.12.20/intl/linux-msg.sed +--- clean/lrzsz-0.12.20/intl/linux-msg.sed 1998-04-26 14:20:52.000000000 +0100 ++++ lrzsz-0.12.20/intl/linux-msg.sed 1970-01-01 01:00:00.000000000 +0100 +@@ -1,100 +0,0 @@ +-# po2msg.sed - Convert Uniforum style .po file to Linux style .msg file +-# Copyright (C) 1995 Free Software Foundation, Inc. +-# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995. +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +-# +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +-# +-# +-# The first directive in the .msg should be the definition of the +-# message set number. We use always set number 1. +-# +-1 { +- i\ +-$set 1 # Automatically created by po2msg.sed +- h +- s/.*/0/ +- x +-} +-# +-# Mitch's old catalog format does not allow comments. +-# +-# We copy the original message as a comment into the .msg file. +-# +-/^msgid/ { +- s/msgid[ ]*"// +-# +-# This does not work now with the new format. +-# /"$/! { +-# s/\\$// +-# s/$/ ... (more lines following)"/ +-# } +- x +-# The following nice solution is by +-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de> +- td +-# Increment a decimal number in pattern space. +-# First hide trailing `9' digits. +- :d +- s/9\(_*\)$/_\1/ +- td +-# Assure at least one digit is available. +- s/^\(_*\)$/0\1/ +-# Increment the last digit. +- s/8\(_*\)$/9\1/ +- s/7\(_*\)$/8\1/ +- s/6\(_*\)$/7\1/ +- s/5\(_*\)$/6\1/ +- s/4\(_*\)$/5\1/ +- s/3\(_*\)$/4\1/ +- s/2\(_*\)$/3\1/ +- s/1\(_*\)$/2\1/ +- s/0\(_*\)$/1\1/ +-# Convert the hidden `9' digits to `0's. +- s/_/0/g +- x +- G +- s/\(.*\)"\n\([0-9]*\)/$ #\2 Original Message:(\1)/p +-} +-# +-# The .msg file contains, other then the .po file, only the translations +-# but each given a unique ID. Starting from 1 and incrementing by 1 for +-# each message we assign them to the messages. +-# It is important that the .po file used to generate the cat-id-tbl.c file +-# (with po-to-tbl) is the same as the one used here. (At least the order +-# of declarations must not be changed.) +-# +-/^msgstr/ { +- s/msgstr[ ]*"\(.*\)"/# \1/ +-# Clear substitution flag. +- tb +-# Append the next line. +- :b +- N +-# Look whether second part is continuation line. +- s/\(.*\n\)"\(.*\)"/\1\2/ +-# Yes, then branch. +- ta +- P +- D +-# Note that D includes a jump to the start!! +-# We found a continuation line. But before printing insert '\'. +- :a +- s/\(.*\)\(\n.*\)/\1\\\2/ +- P +-# We cannot use D here. +- s/.*\n\(.*\)/\1/ +- tb +-} +-d +diff -uprN clean/lrzsz-0.12.20/intl/loadinfo.h lrzsz-0.12.20/intl/loadinfo.h +--- clean/lrzsz-0.12.20/intl/loadinfo.h 1998-04-26 14:20:52.000000000 +0100 ++++ lrzsz-0.12.20/intl/loadinfo.h 1970-01-01 01:00:00.000000000 +0100 +@@ -1,58 +0,0 @@ +-#ifndef PARAMS +-# if __STDC__ +-# define PARAMS(args) args +-# else +-# define PARAMS(args) () +-# endif +-#endif +- +-/* Encoding of locale name parts. */ +-#define CEN_REVISION 1 +-#define CEN_SPONSOR 2 +-#define CEN_SPECIAL 4 +-#define XPG_NORM_CODESET 8 +-#define XPG_CODESET 16 +-#define TERRITORY 32 +-#define CEN_AUDIENCE 64 +-#define XPG_MODIFIER 128 +- +-#define CEN_SPECIFIC (CEN_REVISION|CEN_SPONSOR|CEN_SPECIAL|CEN_AUDIENCE) +-#define XPG_SPECIFIC (XPG_CODESET|XPG_NORM_CODESET|XPG_MODIFIER) +- +- +-struct loaded_l10nfile +-{ +- const char *filename; +- int decided; +- +- const void *data; +- +- struct loaded_l10nfile *next; +- struct loaded_l10nfile *successor[1]; +-}; +- +- +-extern const char *_nl_normalize_codeset PARAMS ((const char *codeset, +- size_t name_len)); +- +-extern struct loaded_l10nfile * +-_nl_make_l10nflist PARAMS ((struct loaded_l10nfile **l10nfile_list, +- const char *dirlist, size_t dirlist_len, int mask, +- const char *language, const char *territory, +- const char *codeset, +- const char *normalized_codeset, +- const char *modifier, const char *special, +- const char *sponsor, const char *revision, +- const char *filename, int do_allocate)); +- +- +-extern const char *_nl_expand_alias PARAMS ((const char *name)); +- +-extern int _nl_explode_name PARAMS ((char *name, const char **language, +- const char **modifier, +- const char **territory, +- const char **codeset, +- const char **normalized_codeset, +- const char **special, +- const char **sponsor, +- const char **revision)); +diff -uprN clean/lrzsz-0.12.20/intl/loadmsgcat.c lrzsz-0.12.20/intl/loadmsgcat.c +--- clean/lrzsz-0.12.20/intl/loadmsgcat.c 1998-04-26 14:22:37.000000000 +0100 ++++ lrzsz-0.12.20/intl/loadmsgcat.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,199 +0,0 @@ +-/* Load needed message catalogs +- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc. +- +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2, or (at your option) +- any later version. +- +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. +- +- You should have received a copy of the GNU General Public License +- along with this program; if not, write to the Free Software Foundation, +- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +- +-#ifdef HAVE_CONFIG_H +-# include <config.h> +-#endif +- +-#include <fcntl.h> +-#include <sys/types.h> +-#include <sys/stat.h> +- +-#if defined STDC_HEADERS || defined _LIBC +-# include <stdlib.h> +-#endif +- +-#if defined HAVE_UNISTD_H || defined _LIBC +-# include <unistd.h> +-#endif +- +-#if (defined HAVE_MMAP && defined HAVE_MUNMAP) || defined _LIBC +-# include <sys/mman.h> +-#endif +- +-#include "gettext.h" +-#include "gettextP.h" +- +-/* @@ end of prolog @@ */ +- +-#ifdef _LIBC +-/* Rename the non ISO C functions. This is required by the standard +- because some ISO C functions will require linking with this object +- file and the name space must not be polluted. */ +-# define fstat __fstat +-# define open __open +-# define close __close +-# define read __read +-# define mmap __mmap +-# define munmap __munmap +-#endif +- +-/* We need a sign, whether a new catalog was loaded, which can be associated +- with all translations. This is important if the translations are +- cached by one of GCC's features. */ +-int _nl_msg_cat_cntr = 0; +- +- +-/* Load the message catalogs specified by FILENAME. If it is no valid +- message catalog do nothing. */ +-void +-_nl_load_domain (domain_file) +- struct loaded_l10nfile *domain_file; +-{ +- int fd; +- struct stat st; +- struct mo_file_header *data = (struct mo_file_header *) -1; +-#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \ +- || defined _LIBC +- int use_mmap = 0; +-#endif +- struct loaded_domain *domain; +- +- domain_file->decided = 1; +- domain_file->data = NULL; +- +- /* If the record does not represent a valid locale the FILENAME +- might be NULL. This can happen when according to the given +- specification the locale file name is different for XPG and CEN +- syntax. */ +- if (domain_file->filename == NULL) +- return; +- +- /* Try to open the addressed file. */ +- fd = open (domain_file->filename, O_RDONLY); +- if (fd == -1) +- return; +- +- /* We must know about the size of the file. */ +- if (fstat (fd, &st) != 0 +- && st.st_size < (off_t) sizeof (struct mo_file_header)) +- { +- /* Something went wrong. */ +- close (fd); +- return; +- } +- +-#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \ +- || defined _LIBC +- /* Now we are ready to load the file. If mmap() is available we try +- this first. If not available or it failed we try to load it. */ +- data = (struct mo_file_header *) mmap (NULL, st.st_size, PROT_READ, +- MAP_PRIVATE, fd, 0); +- +- if (data != (struct mo_file_header *) -1) +- { +- /* mmap() call was successful. */ +- close (fd); +- use_mmap = 1; +- } +-#endif +- +- /* If the data is not yet available (i.e. mmap'ed) we try to load +- it manually. */ +- if (data == (struct mo_file_header *) -1) +- { +- off_t to_read; +- char *read_ptr; +- +- data = (struct mo_file_header *) malloc (st.st_size); +- if (data == NULL) +- return; +- +- to_read = st.st_size; +- read_ptr = (char *) data; +- do +- { +- long int nb = (long int) read (fd, read_ptr, to_read); +- if (nb == -1) +- { +- close (fd); +- return; +- } +- +- read_ptr += nb; +- to_read -= nb; +- } +- while (to_read > 0); +- +- close (fd); +- } +- +- /* Using the magic number we can test whether it really is a message +- catalog file. */ +- if (data->magic != _MAGIC && data->magic != _MAGIC_SWAPPED) +- { +- /* The magic number is wrong: not a message catalog file. */ +-#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \ +- || defined _LIBC +- if (use_mmap) +- munmap ((caddr_t) data, st.st_size); +- else +-#endif +- free (data); +- return; +- } +- +- domain_file->data +- = (struct loaded_domain *) malloc (sizeof (struct loaded_domain)); +- if (domain_file->data == NULL) +- return; +- +- domain = (struct loaded_domain *) domain_file->data; +- domain->data = (char *) data; +- domain->must_swap = data->magic != _MAGIC; +- +- /* Fill in the information about the available tables. */ +- switch (W (domain->must_swap, data->revision)) +- { +- case 0: +- domain->nstrings = W (domain->must_swap, data->nstrings); +- domain->orig_tab = (struct string_desc *) +- ((char *) data + W (domain->must_swap, data->orig_tab_offset)); +- domain->trans_tab = (struct string_desc *) +- ((char *) data + W (domain->must_swap, data->trans_tab_offset)); +- domain->hash_size = W (domain->must_swap, data->hash_tab_size); +- domain->hash_tab = (nls_uint32 *) +- ((char *) data + W (domain->must_swap, data->hash_tab_offset)); +- break; +- default: +- /* This is an illegal revision. */ +-#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \ +- || defined _LIBC +- if (use_mmap) +- munmap ((caddr_t) data, st.st_size); +- else +-#endif +- free (data); +- free (domain); +- domain_file->data = NULL; +- return; +- } +- +- /* Show that one domain is changed. This might make some cached +- translations invalid. */ +- ++_nl_msg_cat_cntr; +-} +diff -uprN clean/lrzsz-0.12.20/intl/localealias.c lrzsz-0.12.20/intl/localealias.c +--- clean/lrzsz-0.12.20/intl/localealias.c 1998-04-26 14:22:37.000000000 +0100 ++++ lrzsz-0.12.20/intl/localealias.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,378 +0,0 @@ +-/* Handle aliases for locale names +- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc. +- Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995. +- +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2, or (at your option) +- any later version. +- +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. +- +- You should have received a copy of the GNU General Public License +- along with this program; if not, write to the Free Software Foundation, +- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +- +-#ifdef HAVE_CONFIG_H +-# include <config.h> +-#endif +- +-#include <ctype.h> +-#include <stdio.h> +-#include <sys/types.h> +- +-#ifdef __GNUC__ +-# define alloca __builtin_alloca +-# define HAVE_ALLOCA 1 +-#else +-# if defined HAVE_ALLOCA_H || defined _LIBC +-# include <alloca.h> +-# else +-# ifdef _AIX +- #pragma alloca +-# else +-# ifndef alloca +-char *alloca (); +-# endif +-# endif +-# endif +-#endif +- +-#if defined STDC_HEADERS || defined _LIBC +-# include <stdlib.h> +-#else +-char *getenv (); +-# ifdef HAVE_MALLOC_H +-# include <malloc.h> +-# else +-void free (); +-# endif +-#endif +- +-#if defined HAVE_STRING_H || defined _LIBC +-# ifndef _GNU_SOURCE +-# define _GNU_SOURCE 1 +-# endif +-# include <string.h> +-#else +-# include <strings.h> +-# ifndef memcpy +-# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num) +-# endif +-#endif +-#if !HAVE_STRCHR && !defined _LIBC +-# ifndef strchr +-# define strchr index +-# endif +-#endif +- +-#include "gettext.h" +-#include "gettextP.h" +- +-/* @@ end of prolog @@ */ +- +-#ifdef _LIBC +-/* Rename the non ANSI C functions. This is required by the standard +- because some ANSI C functions will require linking with this object +- file and the name space must not be polluted. */ +-# define strcasecmp __strcasecmp +-#endif +- +- +-/* For those loosing systems which don't have `alloca' we have to add +- some additional code emulating it. */ +-#ifdef HAVE_ALLOCA +-/* Nothing has to be done. */ +-# define ADD_BLOCK(list, address) /* nothing */ +-# define FREE_BLOCKS(list) /* nothing */ +-#else +-struct block_list +-{ +- void *address; +- struct block_list *next; +-}; +-# define ADD_BLOCK(list, addr) \ +- do { \ +- struct block_list *newp = (struct block_list *) malloc (sizeof (*newp)); \ +- /* If we cannot get a free block we cannot add the new element to \ +- the list. */ \ +- if (newp != NULL) { \ +- newp->address = (addr); \ +- newp->next = (list); \ +- (list) = newp; \ +- } \ +- } while (0) +-# define FREE_BLOCKS(list) \ +- do { \ +- while (list != NULL) { \ +- struct block_list *old = list; \ +- list = list->next; \ +- free (old); \ +- } \ +- } while (0) +-# undef alloca +-# define alloca(size) (malloc (size)) +-#endif /* have alloca */ +- +- +-struct alias_map +-{ +- const char *alias; +- const char *value; +-}; +- +- +-static struct alias_map *map; +-static size_t nmap = 0; +-static size_t maxmap = 0; +- +- +-/* Prototypes for local functions. */ +-static size_t read_alias_file PARAMS ((const char *fname, int fname_len)); +-static void extend_alias_table PARAMS ((void)); +-static int alias_compare PARAMS ((const struct alias_map *map1, +- const struct alias_map *map2)); +- +- +-const char * +-_nl_expand_alias (name) +- const char *name; +-{ +- static const char *locale_alias_path = LOCALE_ALIAS_PATH; +- struct alias_map *retval; +- size_t added; +- +- do +- { +- struct alias_map item; +- +- item.alias = name; +- +- if (nmap > 0) +- retval = (struct alias_map *) bsearch (&item, map, nmap, +- sizeof (struct alias_map), +- (int (*) PARAMS ((const void *, +- const void *)) +- ) alias_compare); +- else +- retval = NULL; +- +- /* We really found an alias. Return the value. */ +- if (retval != NULL) +- return retval->value; +- +- /* Perhaps we can find another alias file. */ +- added = 0; +- while (added == 0 && locale_alias_path[0] != '\0') +- { +- const char *start; +- +- while (locale_alias_path[0] == ':') +- ++locale_alias_path; +- start = locale_alias_path; +- +- while (locale_alias_path[0] != '\0' && locale_alias_path[0] != ':') +- ++locale_alias_path; +- +- if (start < locale_alias_path) +- added = read_alias_file (start, locale_alias_path - start); +- } +- } +- while (added != 0); +- +- return NULL; +-} +- +- +-static size_t +-read_alias_file (fname, fname_len) +- const char *fname; +- int fname_len; +-{ +-#ifndef HAVE_ALLOCA +- struct block_list *block_list = NULL; +-#endif +- FILE *fp; +- char *full_fname; +- size_t added; +- static const char aliasfile[] = "/locale.alias"; +- +- full_fname = (char *) alloca (fname_len + sizeof aliasfile); +- ADD_BLOCK (block_list, full_fname); +- memcpy (full_fname, fname, fname_len); +- memcpy (&full_fname[fname_len], aliasfile, sizeof aliasfile); +- +- fp = fopen (full_fname, "r"); +- if (fp == NULL) +- { +- FREE_BLOCKS (block_list); +- return 0; +- } +- +- added = 0; +- while (!feof (fp)) +- { +- /* It is a reasonable approach to use a fix buffer here because +- a) we are only interested in the first two fields +- b) these fields must be usable as file names and so must not +- be that long +- */ +- char buf[BUFSIZ]; +- char *alias; +- char *value; +- char *cp; +- +- if (fgets (buf, BUFSIZ, fp) == NULL) +- /* EOF reached. */ +- break; +- +- cp = buf; +- /* Ignore leading white space. */ +- while (isspace (cp[0])) +- ++cp; +- +- /* A leading '#' signals a comment line. */ +- if (cp[0] != '\0' && cp[0] != '#') +- { +- alias = cp++; +- while (cp[0] != '\0' && !isspace (cp[0])) +- ++cp; +- /* Terminate alias name. */ +- if (cp[0] != '\0') +- *cp++ = '\0'; +- +- /* Now look for the beginning of the value. */ +- while (isspace (cp[0])) +- ++cp; +- +- if (cp[0] != '\0') +- { +- char *tp; +- size_t len; +- +- value = cp++; +- while (cp[0] != '\0' && !isspace (cp[0])) +- ++cp; +- /* Terminate value. */ +- if (cp[0] == '\n') +- { +- /* This has to be done to make the following test +- for the end of line possible. We are looking for +- the terminating '\n' which do not overwrite here. */ +- *cp++ = '\0'; +- *cp = '\n'; +- } +- else if (cp[0] != '\0') +- *cp++ = '\0'; +- +- if (nmap >= maxmap) +- extend_alias_table (); +- +- /* We cannot depend on strdup available in the libc. Sigh! */ +- len = strlen (alias) + 1; +- tp = (char *) malloc (len); +- if (tp == NULL) +- { +- FREE_BLOCKS (block_list); +- return added; +- } +- memcpy (tp, alias, len); +- map[nmap].alias = tp; +- +- len = strlen (value) + 1; +- tp = (char *) malloc (len); +- if (tp == NULL) +- { +- FREE_BLOCKS (block_list); +- return added; +- } +- memcpy (tp, value, len); +- map[nmap].value = tp; +- +- ++nmap; +- ++added; +- } +- } +- +- /* Possibly not the whole line fits into the buffer. Ignore +- the rest of the line. */ +- while (strchr (cp, '\n') == NULL) +- { +- cp = buf; +- if (fgets (buf, BUFSIZ, fp) == NULL) +- /* Make sure the inner loop will be left. The outer loop +- will exit at the `feof' test. */ +- *cp = '\n'; +- } +- } +- +- /* Should we test for ferror()? I think we have to silently ignore +- errors. --drepper */ +- fclose (fp); +- +- if (added > 0) +- qsort (map, nmap, sizeof (struct alias_map), +- (int (*) PARAMS ((const void *, const void *))) alias_compare); +- +- FREE_BLOCKS (block_list); +- return added; +-} +- +- +-static void +-extend_alias_table () +-{ +- size_t new_size; +- struct alias_map *new_map; +- +- new_size = maxmap == 0 ? 100 : 2 * maxmap; +- new_map = (struct alias_map *) malloc (new_size +- * sizeof (struct alias_map)); +- if (new_map == NULL) +- /* Simply don't extend: we don't have any more core. */ +- return; +- +- memcpy (new_map, map, nmap * sizeof (struct alias_map)); +- +- if (maxmap != 0) +- free (map); +- +- map = new_map; +- maxmap = new_size; +-} +- +- +-static int +-alias_compare (map1, map2) +- const struct alias_map *map1; +- const struct alias_map *map2; +-{ +-#if defined _LIBC || defined HAVE_STRCASECMP +- return strcasecmp (map1->alias, map2->alias); +-#else +- const unsigned char *p1 = (const unsigned char *) map1->alias; +- const unsigned char *p2 = (const unsigned char *) map2->alias; +- unsigned char c1, c2; +- +- if (p1 == p2) +- return 0; +- +- do +- { +- /* I know this seems to be odd but the tolower() function in +- some systems libc cannot handle nonalpha characters. */ +- c1 = isupper (*p1) ? tolower (*p1) : *p1; +- c2 = isupper (*p2) ? tolower (*p2) : *p2; +- if (c1 == '\0') +- break; +- ++p1; +- ++p2; +- } +- while (c1 == c2); +- +- return c1 - c2; +-#endif +-} +diff -uprN clean/lrzsz-0.12.20/intl/Makefile.in lrzsz-0.12.20/intl/Makefile.in +--- clean/lrzsz-0.12.20/intl/Makefile.in 1998-04-26 14:22:35.000000000 +0100 ++++ lrzsz-0.12.20/intl/Makefile.in 1970-01-01 01:00:00.000000000 +0100 +@@ -1,214 +0,0 @@ +-# Makefile for directory with message catalog handling in GNU NLS Utilities. +-# Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc. +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +-# +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +- +-PACKAGE = @PACKAGE@ +-VERSION = @VERSION@ +- +-SHELL = /bin/sh +- +-srcdir = @srcdir@ +-top_srcdir = @top_srcdir@ +-top_builddir = .. +-VPATH = @srcdir@ +- +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +-transform = @program_transform_name@ +-libdir = $(exec_prefix)/lib +-includedir = $(prefix)/include +-datadir = $(prefix)/@DATADIRNAME@ +-localedir = $(datadir)/locale +-gnulocaledir = $(prefix)/share/locale +-gettextsrcdir = @datadir@/gettext/intl +-aliaspath = $(localedir):. +-subdir = intl +- +-INSTALL = @INSTALL@ +-INSTALL_DATA = @INSTALL_DATA@ +-MKINSTALLDIRS = @MKINSTALLDIRS@ +- +-l = @l@ +- +-AR = ar +-CC = @CC@ +-LIBTOOL = @LIBTOOL@ +-RANLIB = @RANLIB@ +- +-DEFS = -DLOCALEDIR=\"$(localedir)\" -DGNULOCALEDIR=\"$(gnulocaledir)\" \ +--DLOCALE_ALIAS_PATH=\"$(aliaspath)\" @DEFS@ +-CPPFLAGS = @CPPFLAGS@ +-CFLAGS = @CFLAGS@ +-LDFLAGS = @LDFLAGS@ +- +-COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS) +- +-HEADERS = $(COMHDRS) libgettext.h loadinfo.h +-COMHDRS = gettext.h gettextP.h hash-string.h +-SOURCES = $(COMSRCS) intl-compat.c cat-compat.c +-COMSRCS = bindtextdom.c dcgettext.c dgettext.c gettext.c \ +-finddomain.c loadmsgcat.c localealias.c textdomain.c l10nflist.c \ +-explodename.c +-OBJECTS = @INTLOBJS@ bindtextdom.$lo dcgettext.$lo dgettext.$lo gettext.$lo \ +-finddomain.$lo loadmsgcat.$lo localealias.$lo textdomain.$lo l10nflist.$lo \ +-explodename.$lo +-CATOBJS = cat-compat.$lo ../po/cat-id-tbl.$lo +-GETTOBJS = intl-compat.$lo +-DISTFILES.common = ChangeLog Makefile.in linux-msg.sed po2tbl.sed.in \ +-xopen-msg.sed $(HEADERS) $(SOURCES) +-DISTFILES.normal = VERSION +-DISTFILES.gettext = libintl.glibc intlh.inst.in +- +-.SUFFIXES: +-.SUFFIXES: .c .o .lo +-.c.o: +- $(COMPILE) $< +-.c.lo: +- $(LIBTOOL) --mode=compile $(COMPILE) $< +- +-INCLUDES = -I.. -I. -I$(top_srcdir)/intl -I$(top_srcdir)/lib +- +-all: all-@USE_INCLUDED_LIBINTL@ +- +-all-yes: libintl.$la intlh.inst +-all-no: +- +-libintl.a: $(OBJECTS) +- rm -f $@ +- $(AR) cru $@ $(OBJECTS) +- $(RANLIB) $@ +- +-libintl.la: $(OBJECTS) +- $(LIBTOOL) --mode=link $(CC) $(LDFLAGS) -o $@ $(OBJECTS) \ +- -version-info 1:0 -rpath $(libdir) +- +-../po/cat-id-tbl.$lo: ../po/cat-id-tbl.c $(top_srcdir)/po/$(PACKAGE).pot +- cd ../po && $(MAKE) cat-id-tbl.$lo +- +-check: all +- +-# This installation goal is only used in GNU gettext. Packages which +-# only use the library should use install instead. +- +-# We must not install the libintl.h/libintl.a files if we are on a +-# system which has the gettext() function in its C library or in a +-# separate library or use the catgets interface. A special case is +-# where configure found a previously installed GNU gettext library. +-# If you want to use the one which comes with this version of the +-# package, you have to use `configure --with-included-gettext'. +-install: install-exec install-data +-install-exec: all +- if test "$(PACKAGE)" = "gettext" \ +- && test '@INTLOBJS@' = '$(GETTOBJS)'; then \ +- if test -r $(MKINSTALLDIRS); then \ +- $(MKINSTALLDIRS) $(libdir) $(includedir); \ +- else \ +- $(top_srcdir)/mkinstalldirs $(libdir) $(includedir); \ +- fi; \ +- $(INSTALL_DATA) intlh.inst $(includedir)/libintl.h; \ +- $(INSTALL_DATA) libintl.a $(libdir)/libintl.a; \ +- else \ +- : ; \ +- fi +-install-data: all +- if test "$(PACKAGE)" = "gettext"; then \ +- if test -r $(MKINSTALLDIRS); then \ +- $(MKINSTALLDIRS) $(gettextsrcdir); \ +- else \ +- $(top_srcdir)/mkinstalldirs $(gettextsrcdir); \ +- fi; \ +- $(INSTALL_DATA) VERSION $(gettextsrcdir)/VERSION; \ +- dists="$(DISTFILES.common)"; \ +- for file in $$dists; do \ +- $(INSTALL_DATA) $(srcdir)/$$file $(gettextsrcdir)/$$file; \ +- done; \ +- else \ +- : ; \ +- fi +- +-# Define this as empty until I found a useful application. +-installcheck: +- +-uninstall: +- dists="$(DISTFILES.common)"; \ +- for file in $$dists; do \ +- rm -f $(gettextsrcdir)/$$file; \ +- done +- +-info dvi: +- +-$(OBJECTS): ../config.h libgettext.h +-bindtextdom.$lo finddomain.$lo loadmsgcat.$lo: gettextP.h gettext.h loadinfo.h +-dcgettext.$lo: gettextP.h gettext.h hash-string.h loadinfo.h +- +-tags: TAGS +- +-TAGS: $(HEADERS) $(SOURCES) +- here=`pwd`; cd $(srcdir) && etags -o $$here/TAGS $(HEADERS) $(SOURCES) +- +-id: ID +- +-ID: $(HEADERS) $(SOURCES) +- here=`pwd`; cd $(srcdir) && mkid -f$$here/ID $(HEADERS) $(SOURCES) +- +- +-mostlyclean: +- rm -f *.a *.o *.lo core core.* +- +-clean: mostlyclean +- +-distclean: clean +- rm -f Makefile ID TAGS po2msg.sed po2tbl.sed libintl.h +- +-maintainer-clean: distclean +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." +- +- +-# GNU gettext needs not contain the file `VERSION' but contains some +-# other files which should not be distributed in other packages. +-distdir = ../$(PACKAGE)-$(VERSION)/$(subdir) +-dist distdir: Makefile $(DISTFILES) +- if test "$(PACKAGE)" = gettext; then \ +- additional="$(DISTFILES.gettext)"; \ +- else \ +- additional="$(DISTFILES.normal)"; \ +- fi; \ +- for file in $(DISTFILES.common) $$additional; do \ +- ln $(srcdir)/$$file $(distdir) 2> /dev/null \ +- || cp -p $(srcdir)/$$file $(distdir); \ +- done +- +-dist-libc: +- tar zcvf intl-glibc.tar.gz $(COMSRCS) $(COMHDRS) libintl.h.glibc +- +-Makefile: Makefile.in ../config.status +- cd .. \ +- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status +- +-# The dependency for intlh.inst is different in gettext and all other +-# packages. Because we cannot you GNU make features we have to solve +-# the problem while rewriting Makefile.in. +-@GT_YES@intlh.inst: intlh.inst.in ../config.status +-@GT_YES@ cd .. \ +-@GT_YES@ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= \ +-@GT_YES@ $(SHELL) ./config.status +-@GT_NO@.PHONY: intlh.inst +-@GT_NO@intlh.inst: +- +-# Tell versions [3.59,3.63) of GNU make not to export all variables. +-# Otherwise a system limit (for SysV at least) may be exceeded. +-.NOEXPORT: +diff -uprN clean/lrzsz-0.12.20/intl/po2tbl.sed.in lrzsz-0.12.20/intl/po2tbl.sed.in +--- clean/lrzsz-0.12.20/intl/po2tbl.sed.in 1998-04-26 14:20:52.000000000 +0100 ++++ lrzsz-0.12.20/intl/po2tbl.sed.in 1970-01-01 01:00:00.000000000 +0100 +@@ -1,102 +0,0 @@ +-# po2tbl.sed - Convert Uniforum style .po file to lookup table for catgets +-# Copyright (C) 1995 Free Software Foundation, Inc. +-# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995. +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +-# +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +-# +-1 { +- i\ +-/* Automatically generated by po2tbl.sed from @PACKAGE NAME@.pot. */\ +-\ +-#if HAVE_CONFIG_H\ +-# include <config.h>\ +-#endif\ +-\ +-#include "libgettext.h"\ +-\ +-const struct _msg_ent _msg_tbl[] = { +- h +- s/.*/0/ +- x +-} +-# +-# Write msgid entries in C array form. +-# +-/^msgid/ { +- s/msgid[ ]*\(".*"\)/ {\1/ +- tb +-# Append the next line +- :b +- N +-# Look whether second part is continuation line. +- s/\(.*\)"\(\n\)"\(.*"\)/\1\2\3/ +-# Yes, then branch. +- ta +-# Because we assume that the input file correctly formed the line +-# just read cannot be again be a msgid line. So it's safe to ignore +-# it. +- s/\(.*\)\n.*/\1/ +- bc +-# We found a continuation line. But before printing insert '\'. +- :a +- s/\(.*\)\(\n.*\)/\1\\\2/ +- P +-# We cannot use D here. +- s/.*\n\(.*\)/\1/ +-# Some buggy seds do not clear the `successful substitution since last ``t''' +-# flag on `N', so we do a `t' here to clear it. +- tb +-# Not reached +- :c +- x +-# The following nice solution is by +-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de> +- td +-# Increment a decimal number in pattern space. +-# First hide trailing `9' digits. +- :d +- s/9\(_*\)$/_\1/ +- td +-# Assure at least one digit is available. +- s/^\(_*\)$/0\1/ +-# Increment the last digit. +- s/8\(_*\)$/9\1/ +- s/7\(_*\)$/8\1/ +- s/6\(_*\)$/7\1/ +- s/5\(_*\)$/6\1/ +- s/4\(_*\)$/5\1/ +- s/3\(_*\)$/4\1/ +- s/2\(_*\)$/3\1/ +- s/1\(_*\)$/2\1/ +- s/0\(_*\)$/1\1/ +-# Convert the hidden `9' digits to `0's. +- s/_/0/g +- x +- G +- s/\(.*\)\n\([0-9]*\)/\1, \2},/ +- s/\(.*\)"$/\1/ +- p +-} +-# +-# Last line. +-# +-$ { +- i\ +-};\ +- +- g +- s/0*\(.*\)/int _msg_tbl_length = \1;/p +-} +-d +diff -uprN clean/lrzsz-0.12.20/intl/textdomain.c lrzsz-0.12.20/intl/textdomain.c +--- clean/lrzsz-0.12.20/intl/textdomain.c 1998-04-26 14:22:37.000000000 +0100 ++++ lrzsz-0.12.20/intl/textdomain.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,106 +0,0 @@ +-/* Implementation of the textdomain(3) function +- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc. +- Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995. +- +- This program is free software; you can redistribute it and/or modify +- it under the terms of the GNU General Public License as published by +- the Free Software Foundation; either version 2, or (at your option) +- any later version. +- +- This program is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- GNU General Public License for more details. +- +- You should have received a copy of the GNU General Public License +- along with this program; if not, write to the Free Software Foundation, +- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +- +-#ifdef HAVE_CONFIG_H +-# include <config.h> +-#endif +- +-#if defined STDC_HEADERS || defined _LIBC +-# include <stdlib.h> +-#endif +- +-#if defined STDC_HEADERS || defined HAVE_STRING_H || defined _LIBC +-# include <string.h> +-#else +-# include <strings.h> +-# ifndef memcpy +-# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num) +-# endif +-#endif +- +-#ifdef _LIBC +-# include <libintl.h> +-#else +-# include "libgettext.h" +-#endif +- +-/* @@ end of prolog @@ */ +- +-/* Name of the default text domain. */ +-extern const char _nl_default_default_domain[]; +- +-/* Default text domain in which entries for gettext(3) are to be found. */ +-extern const char *_nl_current_default_domain; +- +- +-/* Names for the libintl functions are a problem. They must not clash +- with existing names and they should follow ANSI C. But this source +- code is also used in GNU C Library where the names have a __ +- prefix. So we have to make a difference here. */ +-#ifdef _LIBC +-# define TEXTDOMAIN __textdomain +-# define strdup(str) __strdup (str) +-#else +-# define TEXTDOMAIN textdomain__ +-#endif +- +-/* Set the current default message catalog to DOMAINNAME. +- If DOMAINNAME is null, return the current default. +- If DOMAINNAME is "", reset to the default of "messages". */ +-char * +-TEXTDOMAIN (domainname) +- const char *domainname; +-{ +- char *old; +- +- /* A NULL pointer requests the current setting. */ +- if (domainname == NULL) +- return (char *) _nl_current_default_domain; +- +- old = (char *) _nl_current_default_domain; +- +- /* If domain name is the null string set to default domain "messages". */ +- if (domainname[0] == '\0' +- || strcmp (domainname, _nl_default_default_domain) == 0) +- _nl_current_default_domain = _nl_default_default_domain; +- else +- { +- /* If the following malloc fails `_nl_current_default_domain' +- will be NULL. This value will be returned and so signals we +- are out of core. */ +-#if defined _LIBC || defined HAVE_STRDUP +- _nl_current_default_domain = strdup (domainname); +-#else +- size_t len = strlen (domainname) + 1; +- char *cp = (char *) malloc (len); +- if (cp != NULL) +- memcpy (cp, domainname, len); +- _nl_current_default_domain = cp; +-#endif +- } +- +- if (old != _nl_default_default_domain) +- free (old); +- +- return (char *) _nl_current_default_domain; +-} +- +-#ifdef _LIBC +-/* Alias for function name in GNU C Library. */ +-weak_alias (__textdomain, textdomain); +-#endif +diff -uprN clean/lrzsz-0.12.20/intl/VERSION lrzsz-0.12.20/intl/VERSION +--- clean/lrzsz-0.12.20/intl/VERSION 1998-04-26 14:22:37.000000000 +0100 ++++ lrzsz-0.12.20/intl/VERSION 1970-01-01 01:00:00.000000000 +0100 +@@ -1 +0,0 @@ +-GNU gettext library from gettext-0.10.32 +diff -uprN clean/lrzsz-0.12.20/intl/xopen-msg.sed lrzsz-0.12.20/intl/xopen-msg.sed +--- clean/lrzsz-0.12.20/intl/xopen-msg.sed 1998-04-26 14:20:52.000000000 +0100 ++++ lrzsz-0.12.20/intl/xopen-msg.sed 1970-01-01 01:00:00.000000000 +0100 +@@ -1,104 +0,0 @@ +-# po2msg.sed - Convert Uniforum style .po file to X/Open style .msg file +-# Copyright (C) 1995 Free Software Foundation, Inc. +-# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995. +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +-# +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +-# +-# +-# The first directive in the .msg should be the definition of the +-# message set number. We use always set number 1. +-# +-1 { +- i\ +-$set 1 # Automatically created by po2msg.sed +- h +- s/.*/0/ +- x +-} +-# +-# We copy all comments into the .msg file. Perhaps they can help. +-# +-/^#/ s/^#[ ]*/$ /p +-# +-# We copy the original message as a comment into the .msg file. +-# +-/^msgid/ { +-# Does not work now +-# /"$/! { +-# s/\\$// +-# s/$/ ... (more lines following)"/ +-# } +- s/^msgid[ ]*"\(.*\)"$/$ Original Message: \1/ +- p +-} +-# +-# The .msg file contains, other then the .po file, only the translations +-# but each given a unique ID. Starting from 1 and incrementing by 1 for +-# each message we assign them to the messages. +-# It is important that the .po file used to generate the cat-id-tbl.c file +-# (with po-to-tbl) is the same as the one used here. (At least the order +-# of declarations must not be changed.) +-# +-/^msgstr/ { +- s/msgstr[ ]*"\(.*\)"/\1/ +- x +-# The following nice solution is by +-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de> +- td +-# Increment a decimal number in pattern space. +-# First hide trailing `9' digits. +- :d +- s/9\(_*\)$/_\1/ +- td +-# Assure at least one digit is available. +- s/^\(_*\)$/0\1/ +-# Increment the last digit. +- s/8\(_*\)$/9\1/ +- s/7\(_*\)$/8\1/ +- s/6\(_*\)$/7\1/ +- s/5\(_*\)$/6\1/ +- s/4\(_*\)$/5\1/ +- s/3\(_*\)$/4\1/ +- s/2\(_*\)$/3\1/ +- s/1\(_*\)$/2\1/ +- s/0\(_*\)$/1\1/ +-# Convert the hidden `9' digits to `0's. +- s/_/0/g +- x +-# Bring the line in the format `<number> <message>' +- G +- s/^[^\n]*$/& / +- s/\(.*\)\n\([0-9]*\)/\2 \1/ +-# Clear flag from last substitution. +- tb +-# Append the next line. +- :b +- N +-# Look whether second part is a continuation line. +- s/\(.*\n\)"\(.*\)"/\1\2/ +-# Yes, then branch. +- ta +- P +- D +-# Note that `D' includes a jump to the start!! +-# We found a continuation line. But before printing insert '\'. +- :a +- s/\(.*\)\(\n.*\)/\1\\\2/ +- P +-# We cannot use the sed command `D' here +- s/.*\n\(.*\)/\1/ +- tb +-} +-d +diff -uprN clean/lrzsz-0.12.20/lib/Makefile.am lrzsz-0.12.20/lib/Makefile.am +--- clean/lrzsz-0.12.20/lib/Makefile.am 1998-12-27 16:25:26.000000000 +0000 ++++ lrzsz-0.12.20/lib/Makefile.am 2019-11-25 16:22:34.000000000 +0000 +@@ -1,6 +1,4 @@ + noinst_LIBRARIES=libzmodem.a +-CFLAGS=@CFLAGS@ +-AUTOMAKE_OPTIONS=ansi2knr + + EXTRA_DIST = alloca.c ansi2knr.1 ansi2knr.c \ + getopt.c getopt1.c mkdir.c mktime.c \ +diff -uprN clean/lrzsz-0.12.20/lib/Makefile.in lrzsz-0.12.20/lib/Makefile.in +--- clean/lrzsz-0.12.20/lib/Makefile.in 1998-12-30 16:31:43.000000000 +0000 ++++ lrzsz-0.12.20/lib/Makefile.in 2019-11-26 11:37:46.000000000 +0000 +@@ -1,6 +1,8 @@ +-# Makefile.in generated automatically by automake 1.3 from Makefile.am ++# Makefile.in generated by automake 1.16.1 from Makefile.am. ++# @configure_input@ ++ ++# Copyright (C) 1994-2018 Free Software Foundation, Inc. + +-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -10,340 +12,623 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + ++@SET_MAKE@ + +-SHELL = /bin/sh + +-srcdir = @srcdir@ +-top_srcdir = @top_srcdir@ + VPATH = @srcdir@ +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +- +-bindir = @bindir@ +-sbindir = @sbindir@ +-libexecdir = @libexecdir@ +-datadir = @datadir@ +-sysconfdir = @sysconfdir@ +-sharedstatedir = @sharedstatedir@ +-localstatedir = @localstatedir@ +-libdir = @libdir@ +-infodir = @infodir@ +-mandir = @mandir@ +-includedir = @includedir@ +-oldincludedir = /usr/include +- +-DISTDIR = +- ++am__is_gnu_make = { \ ++ if test -z '$(MAKELEVEL)'; then \ ++ false; \ ++ elif test -n '$(MAKE_HOST)'; then \ ++ true; \ ++ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ ++ true; \ ++ else \ ++ false; \ ++ fi; \ ++} ++am__make_running_with_option = \ ++ case $${target_option-} in \ ++ ?) ;; \ ++ *) echo "am__make_running_with_option: internal error: invalid" \ ++ "target option '$${target_option-}' specified" >&2; \ ++ exit 1;; \ ++ esac; \ ++ has_opt=no; \ ++ sane_makeflags=$$MAKEFLAGS; \ ++ if $(am__is_gnu_make); then \ ++ sane_makeflags=$$MFLAGS; \ ++ else \ ++ case $$MAKEFLAGS in \ ++ *\\[\ \ ]*) \ ++ bs=\\; \ ++ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ ++ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ ++ esac; \ ++ fi; \ ++ skip_next=no; \ ++ strip_trailopt () \ ++ { \ ++ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ ++ }; \ ++ for flg in $$sane_makeflags; do \ ++ test $$skip_next = yes && { skip_next=no; continue; }; \ ++ case $$flg in \ ++ *=*|--*) continue;; \ ++ -*I) strip_trailopt 'I'; skip_next=yes;; \ ++ -*I?*) strip_trailopt 'I';; \ ++ -*O) strip_trailopt 'O'; skip_next=yes;; \ ++ -*O?*) strip_trailopt 'O';; \ ++ -*l) strip_trailopt 'l'; skip_next=yes;; \ ++ -*l?*) strip_trailopt 'l';; \ ++ -[dEDm]) skip_next=yes;; \ ++ -[JT]) skip_next=yes;; \ ++ esac; \ ++ case $$flg in \ ++ *$$target_option*) has_opt=yes; break;; \ ++ esac; \ ++ done; \ ++ test $$has_opt = yes ++am__make_dryrun = (target_option=n; $(am__make_running_with_option)) ++am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) + pkgdatadir = $(datadir)/@PACKAGE@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +- +-top_builddir = .. +- +-ACLOCAL = @ACLOCAL@ +-AUTOCONF = @AUTOCONF@ +-AUTOMAKE = @AUTOMAKE@ +-AUTOHEADER = @AUTOHEADER@ +- +-INSTALL = @INSTALL@ +-INSTALL_PROGRAM = @INSTALL_PROGRAM@ +-INSTALL_DATA = @INSTALL_DATA@ +-INSTALL_SCRIPT = @INSTALL_SCRIPT@ +-transform = @program_transform_name@ +- ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : +-CATALOGS = @CATALOGS@ +-CATOBJEXT = @CATOBJEXT@ ++build_triplet = @build@ ++host_triplet = @host@ ++subdir = lib ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ ++ $(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \ ++ $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ ++ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ ++ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ ++ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \ ++ $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS) \ ++ $(am__DIST_COMMON) ++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ++CONFIG_HEADER = $(top_builddir)/config.h ++CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = ++LIBRARIES = $(noinst_LIBRARIES) ++AR = ar ++ARFLAGS = cru ++AM_V_AR = $(am__v_AR_@AM_V@) ++am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@) ++am__v_AR_0 = @echo " AR " $@; ++am__v_AR_1 = ++libzmodem_a_AR = $(AR) $(ARFLAGS) ++am_libzmodem_a_OBJECTS = long-options.$(OBJEXT) xstrtol.$(OBJEXT) \ ++ xstrtoul.$(OBJEXT) error.$(OBJEXT) ++libzmodem_a_OBJECTS = $(am_libzmodem_a_OBJECTS) ++AM_V_P = $(am__v_P_@AM_V@) ++am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) ++am__v_P_0 = false ++am__v_P_1 = : ++AM_V_GEN = $(am__v_GEN_@AM_V@) ++am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) ++am__v_GEN_0 = @echo " GEN " $@; ++am__v_GEN_1 = ++AM_V_at = $(am__v_at_@AM_V@) ++am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) ++am__v_at_0 = @ ++am__v_at_1 = ++DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) ++depcomp = $(SHELL) $(top_srcdir)/depcomp ++am__maybe_remake_depfiles = depfiles ++am__depfiles_remade = $(DEPDIR)/mkdir.Po $(DEPDIR)/mktime.Po \ ++ $(DEPDIR)/stpcpy.Po $(DEPDIR)/strdup.Po $(DEPDIR)/strerror.Po \ ++ $(DEPDIR)/strftime.Po $(DEPDIR)/strpbrk.Po $(DEPDIR)/strstr.Po \ ++ $(DEPDIR)/strtol.Po $(DEPDIR)/strtoul.Po \ ++ $(DEPDIR)/vasprintf.Po ./$(DEPDIR)/alloca.Po \ ++ ./$(DEPDIR)/error.Po ./$(DEPDIR)/long-options.Po \ ++ ./$(DEPDIR)/xstrtol.Po ./$(DEPDIR)/xstrtoul.Po ++am__mv = mv -f ++COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ ++ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++AM_V_CC = $(am__v_CC_@AM_V@) ++am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) ++am__v_CC_0 = @echo " CC " $@; ++am__v_CC_1 = ++CCLD = $(CC) ++LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ ++AM_V_CCLD = $(am__v_CCLD_@AM_V@) ++am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) ++am__v_CCLD_0 = @echo " CCLD " $@; ++am__v_CCLD_1 = ++SOURCES = $(libzmodem_a_SOURCES) ++DIST_SOURCES = $(libzmodem_a_SOURCES) ++am__can_run_installinfo = \ ++ case $$AM_UPDATE_INFO_DIR in \ ++ n|no|NO) false;; \ ++ *) (install-info --version) >/dev/null 2>&1;; \ ++ esac ++HEADERS = $(noinst_HEADERS) ++am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) ++# Read a list of newline-separated strings from the standard input, ++# and print each of them once, without duplicates. Input order is ++# *not* preserved. ++am__uniquify_input = $(AWK) '\ ++ BEGIN { nonempty = 0; } \ ++ { items[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in items) print i; }; } \ ++' ++# Make sure the list of sources is unique. This is necessary because, ++# e.g., the same source file might be shared among _SOURCES variables ++# for different programs/libraries. ++am__define_uniq_tagged_files = \ ++ list='$(am__tagged_files)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | $(am__uniquify_input)` ++ETAGS = etags ++CTAGS = ctags ++am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp \ ++ $(top_srcdir)/mkinstalldirs alloca.c mkdir.c mktime.c stpcpy.c \ ++ strdup.c strerror.c strftime.c strpbrk.c strstr.c strtol.c \ ++ strtoul.c vasprintf.c ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++ACLOCAL = @ACLOCAL@ ++ALLOCA = @ALLOCA@ ++AMTAR = @AMTAR@ ++AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ + CC = @CC@ ++CCDEPMODE = @CCDEPMODE@ ++CFLAGS = @CFLAGS@ + CPP = @CPP@ +-DATADIRNAME = @DATADIRNAME@ ++CPPFLAGS = @CPPFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ ++EGREP = @EGREP@ + ENABLE_TIMESYNC = @ENABLE_TIMESYNC@ +-GENCAT = @GENCAT@ +-GMOFILES = @GMOFILES@ ++EXEEXT = @EXEEXT@ ++GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ + GMSGFMT = @GMSGFMT@ +-GT_NO = @GT_NO@ +-GT_YES = @GT_YES@ +-INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@ +-INSTOBJEXT = @INSTOBJEXT@ +-INTLDEPS = @INTLDEPS@ ++GMSGFMT_015 = @GMSGFMT_015@ ++GREP = @GREP@ ++INSTALL = @INSTALL@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INTLLIBS = @INTLLIBS@ +-INTLOBJS = @INTLOBJS@ ++INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ + LDFLAGS = @LDFLAGS@ ++LIBICONV = @LIBICONV@ ++LIBINTL = @LIBINTL@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ ++LTLIBICONV = @LTLIBICONV@ ++LTLIBINTL = @LTLIBINTL@ ++LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKINSTALLDIRS = @MKINSTALLDIRS@ ++MKDIR_P = @MKDIR_P@ + MSGFMT = @MSGFMT@ ++MSGMERGE = @MSGMERGE@ ++MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@ ++OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ +-POFILES = @POFILES@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ + POSUB = @POSUB@ + RANLIB = @RANLIB@ +-U = @U@ +-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ ++SED = @SED@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ ++STRIP = @STRIP@ + USE_NLS = @USE_NLS@ + VERSION = @VERSION@ +-l = @l@ +- +-noinst_LIBRARIES=libzmodem.a +-CFLAGS=@CFLAGS@ +-AUTOMAKE_OPTIONS=ansi2knr +- ++XGETTEXT = @XGETTEXT@ ++XGETTEXT_015 = @XGETTEXT_015@ ++XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ ++abs_builddir = @abs_builddir@ ++abs_srcdir = @abs_srcdir@ ++abs_top_builddir = @abs_top_builddir@ ++abs_top_srcdir = @abs_top_srcdir@ ++ac_ct_CC = @ac_ct_CC@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++builddir = @builddir@ ++datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++htmldir = @htmldir@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localedir = @localedir@ ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++psdir = @psdir@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++srcdir = @srcdir@ ++sysconfdir = @sysconfdir@ ++target_alias = @target_alias@ ++top_build_prefix = @top_build_prefix@ ++top_builddir = @top_builddir@ ++top_srcdir = @top_srcdir@ ++noinst_LIBRARIES = libzmodem.a + EXTRA_DIST = alloca.c ansi2knr.1 ansi2knr.c \ + getopt.c getopt1.c mkdir.c mktime.c \ + strdup.c strerror.c strstr.c strpbrk.c strtol.c strtoul.c stpcpy.c \ + strftime.c vasprintf.c + + libzmodem_a_SOURCES = long-options.c xstrtol.c xstrtoul.c error.c +-libzmodem_a_LIBADD = @LIBOBJS@ @ALLOCA@ +-libzmodem_a_DEPENDENCIES = @ALLOCA@ @LIBOBJS@ +- ++libzmodem_a_LIBADD = @LIBOBJS@ @ALLOCA@ ++libzmodem_a_DEPENDENCIES = @ALLOCA@ @LIBOBJS@ + noinst_HEADERS = getopt.h long-options.h xstrtol.h xstrtoul.h error.h +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_HEADER = ../config.h +-CONFIG_CLEAN_FILES = +-LIBRARIES = $(noinst_LIBRARIES) ++all: all-am + ++.SUFFIXES: ++.SUFFIXES: .c .o .obj ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ ++ && { if test -f $@; then exit 0; else break; fi; }; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu lib/Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ ++ esac; ++ ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++$(top_srcdir)/configure: $(am__configure_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + +-DEFS = @DEFS@ -I. -I$(srcdir) -I.. +-CPPFLAGS = @CPPFLAGS@ +-ANSI2KNR = @ANSI2KNR@ +-libzmodem_a_OBJECTS = long-options$U.o xstrtol$U.o xstrtoul$U.o \ +-error$U.o +-AR = ar +-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) +-LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@ +-HEADERS = $(noinst_HEADERS) ++clean-noinstLIBRARIES: ++ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) + +-DIST_COMMON = Makefile.am Makefile.in alloca.c ansi2knr.1 ansi2knr.c \ +-getopt.c getopt1.c mkdir.c mktime.c stpcpy.c strdup.c strerror.c \ +-strftime.c strpbrk.c strstr.c strtol.c strtoul.c vasprintf.c ++libzmodem.a: $(libzmodem_a_OBJECTS) $(libzmodem_a_DEPENDENCIES) $(EXTRA_libzmodem_a_DEPENDENCIES) ++ $(AM_V_at)-rm -f libzmodem.a ++ $(AM_V_AR)$(libzmodem_a_AR) libzmodem.a $(libzmodem_a_OBJECTS) $(libzmodem_a_LIBADD) ++ $(AM_V_at)$(RANLIB) libzmodem.a + ++mostlyclean-compile: ++ -rm -f *.$(OBJEXT) + +-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) ++distclean-compile: ++ -rm -f *.tab.c + +-TAR = tar +-GZIP = --best +-SOURCES = $(libzmodem_a_SOURCES) +-OBJECTS = $(libzmodem_a_OBJECTS) ++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/mkdir.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/mktime.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/stpcpy.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strdup.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strerror.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strftime.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strpbrk.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strstr.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strtol.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strtoul.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/vasprintf.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloca.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/error.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/long-options.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xstrtol.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xstrtoul.Po@am__quote@ # am--include-marker ++ ++$(am__depfiles_remade): ++ @$(MKDIR_P) $(@D) ++ @echo '# dummy' >$@-t && $(am__mv) $@-t $@ + +-all: Makefile $(ANSI2KNR) $(LIBRARIES) $(HEADERS) ++am--depfiles: $(am__depfiles_remade) + +-.SUFFIXES: +-.SUFFIXES: .S .c .o .s +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps lib/Makefile ++.c.o: ++@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< ++@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< ++ ++.c.obj: ++@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` ++@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` ++ ++ID: $(am__tagged_files) ++ $(am__define_uniq_tagged_files); mkid -fID $$unique ++tags: tags-am ++TAGS: tags ++ ++tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) ++ set x; \ ++ here=`pwd`; \ ++ $(am__define_uniq_tagged_files); \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ ++ test -n "$$unique" || unique=$$empty_fix; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ ++ fi ++ctags: ctags-am ++ ++CTAGS: ctags ++ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) ++ $(am__define_uniq_tagged_files); \ ++ test -z "$(CTAGS_ARGS)$$unique" \ ++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ ++ $$unique ++ ++GTAGS: ++ here=`$(am__cd) $(top_builddir) && pwd` \ ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" ++cscopelist: cscopelist-am ++ ++cscopelist-am: $(am__tagged_files) ++ list='$(am__tagged_files)'; \ ++ case "$(srcdir)" in \ ++ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ ++ *) sdir=$(subdir)/$(srcdir) ;; \ ++ esac; \ ++ for i in $$list; do \ ++ if test -f "$$i"; then \ ++ echo "$(subdir)/$$i"; \ ++ else \ ++ echo "$$sdir/$$i"; \ ++ fi; \ ++ done >> $(top_builddir)/cscope.files + +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +- cd $(top_builddir) \ +- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status ++distclean-tags: ++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + ++distdir: $(BUILT_SOURCES) ++ $(MAKE) $(AM_MAKEFLAGS) distdir-am + +-mostlyclean-noinstLIBRARIES: ++distdir-am: $(DISTFILES) ++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ list='$(DISTFILES)'; \ ++ dist_files=`for file in $$list; do echo $$file; done | \ ++ sed -e "s|^$$srcdirstrip/||;t" \ ++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ ++ case $$dist_files in \ ++ */*) $(MKDIR_P) `echo "$$dist_files" | \ ++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ ++ sort -u` ;; \ ++ esac; \ ++ for file in $$dist_files; do \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ if test -d $$d/$$file; then \ ++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ ++ else \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ ++ || exit 1; \ ++ fi; \ ++ done ++check-am: all-am ++check: check-am ++all-am: Makefile $(LIBRARIES) $(HEADERS) ++installdirs: ++install: install-am ++install-exec: install-exec-am ++install-data: install-data-am ++uninstall: uninstall-am + +-clean-noinstLIBRARIES: +- -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) ++install-am: all-am ++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am ++ ++installcheck: installcheck-am ++install-strip: ++ if test -z '$(STRIP)'; then \ ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ install; \ ++ else \ ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ ++ fi ++mostlyclean-generic: + +-distclean-noinstLIBRARIES: ++clean-generic: + +-maintainer-clean-noinstLIBRARIES: ++distclean-generic: ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +-.c.o: +- $(COMPILE) -c $< ++maintainer-clean-generic: ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean: clean-am + +-.s.o: +- $(COMPILE) -c $< ++clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am + +-.S.o: +- $(COMPILE) -c $< ++distclean: distclean-am ++ -rm -f $(DEPDIR)/mkdir.Po ++ -rm -f $(DEPDIR)/mktime.Po ++ -rm -f $(DEPDIR)/stpcpy.Po ++ -rm -f $(DEPDIR)/strdup.Po ++ -rm -f $(DEPDIR)/strerror.Po ++ -rm -f $(DEPDIR)/strftime.Po ++ -rm -f $(DEPDIR)/strpbrk.Po ++ -rm -f $(DEPDIR)/strstr.Po ++ -rm -f $(DEPDIR)/strtol.Po ++ -rm -f $(DEPDIR)/strtoul.Po ++ -rm -f $(DEPDIR)/vasprintf.Po ++ -rm -f ./$(DEPDIR)/alloca.Po ++ -rm -f ./$(DEPDIR)/error.Po ++ -rm -f ./$(DEPDIR)/long-options.Po ++ -rm -f ./$(DEPDIR)/xstrtol.Po ++ -rm -f ./$(DEPDIR)/xstrtoul.Po ++ -rm -f Makefile ++distclean-am: clean-am distclean-compile distclean-generic \ ++ distclean-tags + +-mostlyclean-compile: +- -rm -f *.o core *.core ++dvi: dvi-am + +-clean-compile: ++dvi-am: + +-distclean-compile: +- -rm -f *.tab.c ++html: html-am + +-maintainer-clean-compile: ++html-am: + +-mostlyclean-krextra: ++info: info-am + +-clean-krextra: +- -rm -f ansi2knr ++info-am: + +-distclean-krextra: ++install-data-am: + +-maintainer-clean-krextra: +-ansi2knr: ansi2knr.o +- $(LINK) ansi2knr.o $(LIBS) +-ansi2knr.o: $(CONFIG_HEADER) +- +- +-mostlyclean-kr: +- -rm -f *_.c +- +-clean-kr: +- +-distclean-kr: +- +-maintainer-clean-kr: +- +-libzmodem.a: $(libzmodem_a_OBJECTS) $(libzmodem_a_DEPENDENCIES) +- -rm -f libzmodem.a +- $(AR) cru libzmodem.a $(libzmodem_a_OBJECTS) $(libzmodem_a_LIBADD) +- $(RANLIB) libzmodem.a +-alloca_.c: alloca.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/alloca.c; then echo $(srcdir)/alloca.c; else echo alloca.c; fi` | $(ANSI2KNR) alloca_.c +-error_.c: error.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/error.c; then echo $(srcdir)/error.c; else echo error.c; fi` | $(ANSI2KNR) error_.c +-getopt_.c: getopt.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/getopt.c; then echo $(srcdir)/getopt.c; else echo getopt.c; fi` | $(ANSI2KNR) getopt_.c +-getopt1_.c: getopt1.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/getopt1.c; then echo $(srcdir)/getopt1.c; else echo getopt1.c; fi` | $(ANSI2KNR) getopt1_.c +-long-options_.c: long-options.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/long-options.c; then echo $(srcdir)/long-options.c; else echo long-options.c; fi` | $(ANSI2KNR) long-options_.c +-mkdir_.c: mkdir.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/mkdir.c; then echo $(srcdir)/mkdir.c; else echo mkdir.c; fi` | $(ANSI2KNR) mkdir_.c +-mktime_.c: mktime.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/mktime.c; then echo $(srcdir)/mktime.c; else echo mktime.c; fi` | $(ANSI2KNR) mktime_.c +-stpcpy_.c: stpcpy.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/stpcpy.c; then echo $(srcdir)/stpcpy.c; else echo stpcpy.c; fi` | $(ANSI2KNR) stpcpy_.c +-strdup_.c: strdup.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/strdup.c; then echo $(srcdir)/strdup.c; else echo strdup.c; fi` | $(ANSI2KNR) strdup_.c +-strerror_.c: strerror.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/strerror.c; then echo $(srcdir)/strerror.c; else echo strerror.c; fi` | $(ANSI2KNR) strerror_.c +-strftime_.c: strftime.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/strftime.c; then echo $(srcdir)/strftime.c; else echo strftime.c; fi` | $(ANSI2KNR) strftime_.c +-strpbrk_.c: strpbrk.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/strpbrk.c; then echo $(srcdir)/strpbrk.c; else echo strpbrk.c; fi` | $(ANSI2KNR) strpbrk_.c +-strstr_.c: strstr.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/strstr.c; then echo $(srcdir)/strstr.c; else echo strstr.c; fi` | $(ANSI2KNR) strstr_.c +-strtol_.c: strtol.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/strtol.c; then echo $(srcdir)/strtol.c; else echo strtol.c; fi` | $(ANSI2KNR) strtol_.c +-strtoul_.c: strtoul.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/strtoul.c; then echo $(srcdir)/strtoul.c; else echo strtoul.c; fi` | $(ANSI2KNR) strtoul_.c +-vasprintf_.c: vasprintf.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/vasprintf.c; then echo $(srcdir)/vasprintf.c; else echo vasprintf.c; fi` | $(ANSI2KNR) vasprintf_.c +-xstrtol_.c: xstrtol.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/xstrtol.c; then echo $(srcdir)/xstrtol.c; else echo xstrtol.c; fi` | $(ANSI2KNR) xstrtol_.c +-xstrtoul_.c: xstrtoul.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/xstrtoul.c; then echo $(srcdir)/xstrtoul.c; else echo xstrtoul.c; fi` | $(ANSI2KNR) xstrtoul_.c +-alloca_.o error_.o getopt_.o getopt1_.o long-options_.o mkdir_.o \ +-mktime_.o stpcpy_.o strdup_.o strerror_.o strftime_.o strpbrk_.o \ +-strstr_.o strtol_.o strtoul_.o vasprintf_.o xstrtol_.o xstrtoul_.o : \ +-$(ANSI2KNR) +- +-tags: TAGS +- +-ID: $(HEADERS) $(SOURCES) $(LISP) +- here=`pwd` && cd $(srcdir) \ +- && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP) ++install-dvi: install-dvi-am + +-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) +- tags=; \ +- here=`pwd`; \ +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ +- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ +- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) ++install-dvi-am: + +-mostlyclean-tags: ++install-exec-am: + +-clean-tags: ++install-html: install-html-am + +-distclean-tags: +- -rm -f TAGS ID ++install-html-am: + +-maintainer-clean-tags: ++install-info: install-info-am + +-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) ++install-info-am: + +-subdir = lib ++install-man: + +-distdir: $(DISTFILES) +- @for file in $(DISTFILES); do \ +- d=$(srcdir); \ +- test -f $(distdir)/$$file \ +- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ +- || cp -p $$d/$$file $(distdir)/$$file; \ +- done +-error.o: error.c ../config.h +-long-options.o: long-options.c ../config.h getopt.h long-options.h +-xstrtol.o: xstrtol.c ../config.h xstrtol.h +-xstrtoul.o: xstrtoul.c xstrtol.c ../config.h xstrtol.h +- +-info: +-dvi: +-check: all +- $(MAKE) +-installcheck: +-install-exec: +- @$(NORMAL_INSTALL) ++install-pdf: install-pdf-am + +-install-data: +- @$(NORMAL_INSTALL) ++install-pdf-am: + +-install: install-exec install-data all +- @: ++install-ps: install-ps-am + +-uninstall: ++install-ps-am: + +-install-strip: +- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install +-installdirs: ++installcheck-am: + ++maintainer-clean: maintainer-clean-am ++ -rm -f $(DEPDIR)/mkdir.Po ++ -rm -f $(DEPDIR)/mktime.Po ++ -rm -f $(DEPDIR)/stpcpy.Po ++ -rm -f $(DEPDIR)/strdup.Po ++ -rm -f $(DEPDIR)/strerror.Po ++ -rm -f $(DEPDIR)/strftime.Po ++ -rm -f $(DEPDIR)/strpbrk.Po ++ -rm -f $(DEPDIR)/strstr.Po ++ -rm -f $(DEPDIR)/strtol.Po ++ -rm -f $(DEPDIR)/strtoul.Po ++ -rm -f $(DEPDIR)/vasprintf.Po ++ -rm -f ./$(DEPDIR)/alloca.Po ++ -rm -f ./$(DEPDIR)/error.Po ++ -rm -f ./$(DEPDIR)/long-options.Po ++ -rm -f ./$(DEPDIR)/xstrtol.Po ++ -rm -f ./$(DEPDIR)/xstrtoul.Po ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic + +-mostlyclean-generic: +- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) ++mostlyclean: mostlyclean-am + +-clean-generic: +- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) ++mostlyclean-am: mostlyclean-compile mostlyclean-generic + +-distclean-generic: +- -rm -f Makefile $(DISTCLEANFILES) +- -rm -f config.cache config.log stamp-h stamp-h[0-9]* +- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++pdf: pdf-am + +-maintainer-clean-generic: +- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) +-mostlyclean: mostlyclean-noinstLIBRARIES mostlyclean-compile \ +- mostlyclean-krextra mostlyclean-kr mostlyclean-tags \ +- mostlyclean-generic +- +-clean: clean-noinstLIBRARIES clean-compile clean-krextra clean-kr \ +- clean-tags clean-generic mostlyclean +- +-distclean: distclean-noinstLIBRARIES distclean-compile \ +- distclean-krextra distclean-kr distclean-tags \ +- distclean-generic clean +- -rm -f config.status +- +-maintainer-clean: maintainer-clean-noinstLIBRARIES \ +- maintainer-clean-compile maintainer-clean-krextra \ +- maintainer-clean-kr maintainer-clean-tags \ +- maintainer-clean-generic distclean +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." ++pdf-am: ++ ++ps: ps-am ++ ++ps-am: ++ ++uninstall-am: ++ ++.MAKE: install-am install-strip ++ ++.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \ ++ clean-generic clean-noinstLIBRARIES cscopelist-am ctags \ ++ ctags-am distclean distclean-compile distclean-generic \ ++ distclean-tags distdir dvi dvi-am html html-am info info-am \ ++ install install-am install-data install-data-am install-dvi \ ++ install-dvi-am install-exec install-exec-am install-html \ ++ install-html-am install-info install-info-am install-man \ ++ install-pdf install-pdf-am install-ps install-ps-am \ ++ install-strip installcheck installcheck-am installdirs \ ++ maintainer-clean maintainer-clean-generic mostlyclean \ ++ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \ ++ tags tags-am uninstall uninstall-am + +-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ +-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ +-mostlyclean-compile distclean-compile clean-compile \ +-maintainer-clean-compile mostlyclean-krextra distclean-krextra \ +-clean-krextra maintainer-clean-krextra mostlyclean-kr distclean-kr \ +-clean-kr maintainer-clean-kr tags mostlyclean-tags distclean-tags \ +-clean-tags maintainer-clean-tags distdir info dvi installcheck \ +-install-exec install-data install uninstall all installdirs \ +-mostlyclean-generic distclean-generic clean-generic \ +-maintainer-clean-generic clean mostlyclean distclean maintainer-clean ++.PRECIOUS: Makefile + + + # Tell versions [3.59,3.63) of GNU make to not export all variables. +diff -uprN clean/lrzsz-0.12.20/m4/ChangeLog lrzsz-0.12.20/m4/ChangeLog +--- clean/lrzsz-0.12.20/m4/ChangeLog 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/m4/ChangeLog 2019-11-25 18:21:04.000000000 +0000 +@@ -0,0 +1,24 @@ ++2019-11-25 gettextize <bug-gnu-gettext@gnu.org> ++ ++ * gettext.m4: Upgrade to gettext-0.20.1. ++ * host-cpu-c-abi.m4: New file, from gettext-0.20.1. ++ * iconv.m4: Upgrade to gettext-0.20.1. ++ * intlmacosx.m4: New file, from gettext-0.20.1. ++ * lib-ld.m4: Upgrade to gettext-0.20.1. ++ * lib-link.m4: Upgrade to gettext-0.20.1. ++ * lib-prefix.m4: Upgrade to gettext-0.20.1. ++ * nls.m4: Upgrade to gettext-0.20.1. ++ * po.m4: Upgrade to gettext-0.20.1. ++ * progtest.m4: Upgrade to gettext-0.20.1. ++ ++2019-11-25 gettextize <bug-gnu-gettext@gnu.org> ++ ++ * gettext.m4: New file, from gettext-0.19.8.1. ++ * iconv.m4: New file, from gettext-0.19.8.1. ++ * lib-ld.m4: New file, from gettext-0.19.8.1. ++ * lib-link.m4: New file, from gettext-0.19.8.1. ++ * lib-prefix.m4: New file, from gettext-0.19.8.1. ++ * nls.m4: New file, from gettext-0.19.8.1. ++ * po.m4: New file, from gettext-0.19.8.1. ++ * progtest.m4: New file, from gettext-0.19.8.1. ++ +diff -uprN clean/lrzsz-0.12.20/m4/gettext.m4 lrzsz-0.12.20/m4/gettext.m4 +--- clean/lrzsz-0.12.20/m4/gettext.m4 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/m4/gettext.m4 2019-11-25 18:21:18.000000000 +0000 +@@ -0,0 +1,386 @@ ++# gettext.m4 serial 70 (gettext-0.20) ++dnl Copyright (C) 1995-2014, 2016, 2018 Free Software Foundation, Inc. ++dnl This file is free software; the Free Software Foundation ++dnl gives unlimited permission to copy and/or distribute it, ++dnl with or without modifications, as long as this notice is preserved. ++dnl ++dnl This file can be used in projects which are not available under ++dnl the GNU General Public License or the GNU Library General Public ++dnl License but which still want to provide support for the GNU gettext ++dnl functionality. ++dnl Please note that the actual code of the GNU gettext library is covered ++dnl by the GNU Library General Public License, and the rest of the GNU ++dnl gettext package is covered by the GNU General Public License. ++dnl They are *not* in the public domain. ++ ++dnl Authors: ++dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000. ++dnl Bruno Haible <haible@clisp.cons.org>, 2000-2006, 2008-2010. ++ ++dnl Macro to add for using GNU gettext. ++ ++dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). ++dnl INTLSYMBOL must be one of 'external', 'use-libtool'. ++dnl INTLSYMBOL should be 'external' for packages other than GNU gettext, and ++dnl 'use-libtool' for the packages 'gettext-runtime' and 'gettext-tools'. ++dnl If INTLSYMBOL is 'use-libtool', then a libtool library ++dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, ++dnl depending on --{enable,disable}-{shared,static} and on the presence of ++dnl AM-DISABLE-SHARED). ++dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext ++dnl implementations (in libc or libintl) without the ngettext() function ++dnl will be ignored. If NEEDSYMBOL is specified and is ++dnl 'need-formatstring-macros', then GNU gettext implementations that don't ++dnl support the ISO C 99 <inttypes.h> formatstring macros will be ignored. ++dnl INTLDIR is used to find the intl libraries. If empty, ++dnl the value '$(top_builddir)/intl/' is used. ++dnl ++dnl The result of the configuration is one of three cases: ++dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled ++dnl and used. ++dnl Catalog format: GNU --> install in $(datadir) ++dnl Catalog extension: .mo after installation, .gmo in source tree ++dnl 2) GNU gettext has been found in the system's C library. ++dnl Catalog format: GNU --> install in $(datadir) ++dnl Catalog extension: .mo after installation, .gmo in source tree ++dnl 3) No internationalization, always use English msgid. ++dnl Catalog format: none ++dnl Catalog extension: none ++dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. ++dnl The use of .gmo is historical (it was needed to avoid overwriting the ++dnl GNU format catalogs when building on a platform with an X/Open gettext), ++dnl but we keep it in order not to force irrelevant filename changes on the ++dnl maintainers. ++dnl ++AC_DEFUN([AM_GNU_GETTEXT], ++[ ++ dnl Argument checking. ++ ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [use-libtool], , ++ [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT ++])])])]) ++ ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old], ++ [errprint([ERROR: Use of AM_GNU_GETTEXT without [external] argument is no longer supported. ++])]) ++ ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , ++ [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT ++])])])]) ++ define([gt_included_intl], ++ ifelse([$1], [external], [no], [yes])) ++ gt_NEEDS_INIT ++ AM_GNU_GETTEXT_NEED([$2]) ++ ++ AC_REQUIRE([AM_PO_SUBDIRS])dnl ++ ifelse(gt_included_intl, yes, [ ++ AC_REQUIRE([AM_INTL_SUBDIR])dnl ++ ]) ++ ++ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. ++ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) ++ AC_REQUIRE([AC_LIB_RPATH]) ++ ++ dnl Sometimes libintl requires libiconv, so first search for libiconv. ++ dnl Ideally we would do this search only after the ++ dnl if test "$USE_NLS" = "yes"; then ++ dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then ++ dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT ++ dnl the configure script would need to contain the same shell code ++ dnl again, outside any 'if'. There are two solutions: ++ dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. ++ dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. ++ dnl Since AC_PROVIDE_IFELSE is not documented, we avoid it. ++ ifelse(gt_included_intl, yes, , [ ++ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) ++ ]) ++ ++ dnl Sometimes, on Mac OS X, libintl requires linking with CoreFoundation. ++ gt_INTL_MACOSX ++ ++ dnl Set USE_NLS. ++ AC_REQUIRE([AM_NLS]) ++ ++ ifelse(gt_included_intl, yes, [ ++ BUILD_INCLUDED_LIBINTL=no ++ USE_INCLUDED_LIBINTL=no ++ ]) ++ LIBINTL= ++ LTLIBINTL= ++ POSUB= ++ ++ dnl Add a version number to the cache macros. ++ case " $gt_needs " in ++ *" need-formatstring-macros "*) gt_api_version=3 ;; ++ *" need-ngettext "*) gt_api_version=2 ;; ++ *) gt_api_version=1 ;; ++ esac ++ gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" ++ gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" ++ ++ dnl If we use NLS figure out what method ++ if test "$USE_NLS" = "yes"; then ++ gt_use_preinstalled_gnugettext=no ++ ifelse(gt_included_intl, yes, [ ++ AC_MSG_CHECKING([whether included gettext is requested]) ++ AC_ARG_WITH([included-gettext], ++ [ --with-included-gettext use the GNU gettext library included here], ++ nls_cv_force_use_gnu_gettext=$withval, ++ nls_cv_force_use_gnu_gettext=no) ++ AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext]) ++ ++ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" ++ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then ++ ]) ++ dnl User does not insist on using GNU NLS library. Figure out what ++ dnl to use. If GNU gettext is available we use this. Else we have ++ dnl to fall back to GNU NLS library. ++ ++ if test $gt_api_version -ge 3; then ++ gt_revision_test_code=' ++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION ++#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) ++#endif ++changequote(,)dnl ++typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; ++changequote([,])dnl ++' ++ else ++ gt_revision_test_code= ++ fi ++ if test $gt_api_version -ge 2; then ++ gt_expression_test_code=' + * ngettext ("", "", 0)' ++ else ++ gt_expression_test_code= ++ fi ++ ++ AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc], ++ [AC_LINK_IFELSE( ++ [AC_LANG_PROGRAM( ++ [[ ++#include <libintl.h> ++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION ++extern int _nl_msg_cat_cntr; ++extern int *_nl_domain_bindings; ++#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings) ++#else ++#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 ++#endif ++$gt_revision_test_code ++ ]], ++ [[ ++bindtextdomain ("", ""); ++return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION ++ ]])], ++ [eval "$gt_func_gnugettext_libc=yes"], ++ [eval "$gt_func_gnugettext_libc=no"])]) ++ ++ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then ++ dnl Sometimes libintl requires libiconv, so first search for libiconv. ++ ifelse(gt_included_intl, yes, , [ ++ AM_ICONV_LINK ++ ]) ++ dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL ++ dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) ++ dnl because that would add "-liconv" to LIBINTL and LTLIBINTL ++ dnl even if libiconv doesn't exist. ++ AC_LIB_LINKFLAGS_BODY([intl]) ++ AC_CACHE_CHECK([for GNU gettext in libintl], ++ [$gt_func_gnugettext_libintl], ++ [gt_save_CPPFLAGS="$CPPFLAGS" ++ CPPFLAGS="$CPPFLAGS $INCINTL" ++ gt_save_LIBS="$LIBS" ++ LIBS="$LIBS $LIBINTL" ++ dnl Now see whether libintl exists and does not depend on libiconv. ++ AC_LINK_IFELSE( ++ [AC_LANG_PROGRAM( ++ [[ ++#include <libintl.h> ++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION ++extern int _nl_msg_cat_cntr; ++extern ++#ifdef __cplusplus ++"C" ++#endif ++const char *_nl_expand_alias (const char *); ++#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) ++#else ++#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 ++#endif ++$gt_revision_test_code ++ ]], ++ [[ ++bindtextdomain ("", ""); ++return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION ++ ]])], ++ [eval "$gt_func_gnugettext_libintl=yes"], ++ [eval "$gt_func_gnugettext_libintl=no"]) ++ dnl Now see whether libintl exists and depends on libiconv. ++ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then ++ LIBS="$LIBS $LIBICONV" ++ AC_LINK_IFELSE( ++ [AC_LANG_PROGRAM( ++ [[ ++#include <libintl.h> ++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION ++extern int _nl_msg_cat_cntr; ++extern ++#ifdef __cplusplus ++"C" ++#endif ++const char *_nl_expand_alias (const char *); ++#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) ++#else ++#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 ++#endif ++$gt_revision_test_code ++ ]], ++ [[ ++bindtextdomain ("", ""); ++return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION ++ ]])], ++ [LIBINTL="$LIBINTL $LIBICONV" ++ LTLIBINTL="$LTLIBINTL $LTLIBICONV" ++ eval "$gt_func_gnugettext_libintl=yes" ++ ]) ++ fi ++ CPPFLAGS="$gt_save_CPPFLAGS" ++ LIBS="$gt_save_LIBS"]) ++ fi ++ ++ dnl If an already present or preinstalled GNU gettext() is found, ++ dnl use it. But if this macro is used in GNU gettext, and GNU ++ dnl gettext is already preinstalled in libintl, we update this ++ dnl libintl. (Cf. the install rule in intl/Makefile.in.) ++ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ ++ || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ ++ && test "$PACKAGE" != gettext-runtime \ ++ && test "$PACKAGE" != gettext-tools; }; then ++ gt_use_preinstalled_gnugettext=yes ++ else ++ dnl Reset the values set by searching for libintl. ++ LIBINTL= ++ LTLIBINTL= ++ INCINTL= ++ fi ++ ++ ifelse(gt_included_intl, yes, [ ++ if test "$gt_use_preinstalled_gnugettext" != "yes"; then ++ dnl GNU gettext is not found in the C library. ++ dnl Fall back on included GNU gettext library. ++ nls_cv_use_gnu_gettext=yes ++ fi ++ fi ++ ++ if test "$nls_cv_use_gnu_gettext" = "yes"; then ++ dnl Mark actions used to generate GNU NLS library. ++ BUILD_INCLUDED_LIBINTL=yes ++ USE_INCLUDED_LIBINTL=yes ++ LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.la $LIBICONV $LIBTHREAD" ++ LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.la $LTLIBICONV $LTLIBTHREAD" ++ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` ++ fi ++ ++ CATOBJEXT= ++ if test "$gt_use_preinstalled_gnugettext" = "yes" \ ++ || test "$nls_cv_use_gnu_gettext" = "yes"; then ++ dnl Mark actions to use GNU gettext tools. ++ CATOBJEXT=.gmo ++ fi ++ ]) ++ ++ if test -n "$INTL_MACOSX_LIBS"; then ++ if test "$gt_use_preinstalled_gnugettext" = "yes" \ ++ || test "$nls_cv_use_gnu_gettext" = "yes"; then ++ dnl Some extra flags are needed during linking. ++ LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" ++ LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" ++ fi ++ fi ++ ++ if test "$gt_use_preinstalled_gnugettext" = "yes" \ ++ || test "$nls_cv_use_gnu_gettext" = "yes"; then ++ AC_DEFINE([ENABLE_NLS], [1], ++ [Define to 1 if translation of program messages to the user's native language ++ is requested.]) ++ else ++ USE_NLS=no ++ fi ++ fi ++ ++ AC_MSG_CHECKING([whether to use NLS]) ++ AC_MSG_RESULT([$USE_NLS]) ++ if test "$USE_NLS" = "yes"; then ++ AC_MSG_CHECKING([where the gettext function comes from]) ++ if test "$gt_use_preinstalled_gnugettext" = "yes"; then ++ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then ++ gt_source="external libintl" ++ else ++ gt_source="libc" ++ fi ++ else ++ gt_source="included intl directory" ++ fi ++ AC_MSG_RESULT([$gt_source]) ++ fi ++ ++ if test "$USE_NLS" = "yes"; then ++ ++ if test "$gt_use_preinstalled_gnugettext" = "yes"; then ++ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then ++ AC_MSG_CHECKING([how to link with libintl]) ++ AC_MSG_RESULT([$LIBINTL]) ++ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) ++ fi ++ ++ dnl For backward compatibility. Some packages may be using this. ++ AC_DEFINE([HAVE_GETTEXT], [1], ++ [Define if the GNU gettext() function is already present or preinstalled.]) ++ AC_DEFINE([HAVE_DCGETTEXT], [1], ++ [Define if the GNU dcgettext() function is already present or preinstalled.]) ++ fi ++ ++ dnl We need to process the po/ directory. ++ POSUB=po ++ fi ++ ++ ifelse(gt_included_intl, yes, [ ++ dnl In GNU gettext we have to set BUILD_INCLUDED_LIBINTL to 'yes' ++ dnl because some of the testsuite requires it. ++ BUILD_INCLUDED_LIBINTL=yes ++ ++ dnl Make all variables we use known to autoconf. ++ AC_SUBST([BUILD_INCLUDED_LIBINTL]) ++ AC_SUBST([USE_INCLUDED_LIBINTL]) ++ AC_SUBST([CATOBJEXT]) ++ ]) ++ ++ dnl For backward compatibility. Some Makefiles may be using this. ++ INTLLIBS="$LIBINTL" ++ AC_SUBST([INTLLIBS]) ++ ++ dnl Make all documented variables known to autoconf. ++ AC_SUBST([LIBINTL]) ++ AC_SUBST([LTLIBINTL]) ++ AC_SUBST([POSUB]) ++]) ++ ++ ++dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized. ++m4_define([gt_NEEDS_INIT], ++[ ++ m4_divert_text([DEFAULTS], [gt_needs=]) ++ m4_define([gt_NEEDS_INIT], []) ++]) ++ ++ ++dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL]) ++AC_DEFUN([AM_GNU_GETTEXT_NEED], ++[ ++ m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"]) ++]) ++ ++ ++dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) ++AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) ++ ++ ++dnl Usage: AM_GNU_GETTEXT_REQUIRE_VERSION([gettext-version]) ++AC_DEFUN([AM_GNU_GETTEXT_REQUIRE_VERSION], []) +diff -uprN clean/lrzsz-0.12.20/m4/host-cpu-c-abi.m4 lrzsz-0.12.20/m4/host-cpu-c-abi.m4 +--- clean/lrzsz-0.12.20/m4/host-cpu-c-abi.m4 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/m4/host-cpu-c-abi.m4 2019-11-25 18:21:18.000000000 +0000 +@@ -0,0 +1,644 @@ ++# host-cpu-c-abi.m4 serial 11 ++dnl Copyright (C) 2002-2019 Free Software Foundation, Inc. ++dnl This file is free software; the Free Software Foundation ++dnl gives unlimited permission to copy and/or distribute it, ++dnl with or without modifications, as long as this notice is preserved. ++ ++dnl From Bruno Haible and Sam Steingold. ++ ++dnl Sets the HOST_CPU variable to the canonical name of the CPU. ++dnl Sets the HOST_CPU_C_ABI variable to the canonical name of the CPU with its ++dnl C language ABI (application binary interface). ++dnl Also defines __${HOST_CPU}__ and __${HOST_CPU_C_ABI}__ as C macros in ++dnl config.h. ++dnl ++dnl This canonical name can be used to select a particular assembly language ++dnl source file that will interoperate with C code on the given host. ++dnl ++dnl For example: ++dnl * 'i386' and 'sparc' are different canonical names, because code for i386 ++dnl will not run on SPARC CPUs and vice versa. They have different ++dnl instruction sets. ++dnl * 'sparc' and 'sparc64' are different canonical names, because code for ++dnl 'sparc' and code for 'sparc64' cannot be linked together: 'sparc' code ++dnl contains 32-bit instructions, whereas 'sparc64' code contains 64-bit ++dnl instructions. A process on a SPARC CPU can be in 32-bit mode or in 64-bit ++dnl mode, but not both. ++dnl * 'mips' and 'mipsn32' are different canonical names, because they use ++dnl different argument passing and return conventions for C functions, and ++dnl although the instruction set of 'mips' is a large subset of the ++dnl instruction set of 'mipsn32'. ++dnl * 'mipsn32' and 'mips64' are different canonical names, because they use ++dnl different sizes for the C types like 'int' and 'void *', and although ++dnl the instruction sets of 'mipsn32' and 'mips64' are the same. ++dnl * The same canonical name is used for different endiannesses. You can ++dnl determine the endianness through preprocessor symbols: ++dnl - 'arm': test __ARMEL__. ++dnl - 'mips', 'mipsn32', 'mips64': test _MIPSEB vs. _MIPSEL. ++dnl - 'powerpc64': test _BIG_ENDIAN vs. _LITTLE_ENDIAN. ++dnl * The same name 'i386' is used for CPUs of type i386, i486, i586 ++dnl (Pentium), AMD K7, Pentium II, Pentium IV, etc., because ++dnl - Instructions that do not exist on all of these CPUs (cmpxchg, ++dnl MMX, SSE, SSE2, 3DNow! etc.) are not frequently used. If your ++dnl assembly language source files use such instructions, you will ++dnl need to make the distinction. ++dnl - Speed of execution of the common instruction set is reasonable across ++dnl the entire family of CPUs. If you have assembly language source files ++dnl that are optimized for particular CPU types (like GNU gmp has), you ++dnl will need to make the distinction. ++dnl See <https://en.wikipedia.org/wiki/X86_instruction_listings>. ++AC_DEFUN([gl_HOST_CPU_C_ABI], ++[ ++ AC_REQUIRE([AC_CANONICAL_HOST]) ++ AC_REQUIRE([gl_C_ASM]) ++ AC_CACHE_CHECK([host CPU and C ABI], [gl_cv_host_cpu_c_abi], ++ [case "$host_cpu" in ++ ++changequote(,)dnl ++ i[4567]86 ) ++changequote([,])dnl ++ gl_cv_host_cpu_c_abi=i386 ++ ;; ++ ++ x86_64 ) ++ # On x86_64 systems, the C compiler may be generating code in one of ++ # these ABIs: ++ # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64. ++ # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64 ++ # with native Windows (mingw, MSVC). ++ # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32. ++ # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if (defined __x86_64__ || defined __amd64__ \ ++ || defined _M_X64 || defined _M_AMD64) ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined __ILP32__ || defined _ILP32 ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi=x86_64-x32], ++ [gl_cv_host_cpu_c_abi=x86_64])], ++ [gl_cv_host_cpu_c_abi=i386]) ++ ;; ++ ++changequote(,)dnl ++ alphaev[4-8] | alphaev56 | alphapca5[67] | alphaev6[78] ) ++changequote([,])dnl ++ gl_cv_host_cpu_c_abi=alpha ++ ;; ++ ++ arm* | aarch64 ) ++ # Assume arm with EABI. ++ # On arm64 systems, the C compiler may be generating code in one of ++ # these ABIs: ++ # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64. ++ # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32. ++ # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#ifdef __aarch64__ ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined __ILP32__ || defined _ILP32 ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi=arm64-ilp32], ++ [gl_cv_host_cpu_c_abi=arm64])], ++ [# Don't distinguish little-endian and big-endian arm, since they ++ # don't require different machine code for simple operations and ++ # since the user can distinguish them through the preprocessor ++ # defines __ARMEL__ vs. __ARMEB__. ++ # But distinguish arm which passes floating-point arguments and ++ # return values in integer registers (r0, r1, ...) - this is ++ # gcc -mfloat-abi=soft or gcc -mfloat-abi=softfp - from arm which ++ # passes them in float registers (s0, s1, ...) and double registers ++ # (d0, d1, ...) - this is gcc -mfloat-abi=hard. GCC 4.6 or newer ++ # sets the preprocessor defines __ARM_PCS (for the first case) and ++ # __ARM_PCS_VFP (for the second case), but older GCC does not. ++ echo 'double ddd; void func (double dd) { ddd = dd; }' > conftest.c ++ # Look for a reference to the register d0 in the .s file. ++ AC_TRY_COMMAND(${CC-cc} $CFLAGS $CPPFLAGS $gl_c_asm_opt conftest.c) >/dev/null 2>&1 ++ if LC_ALL=C grep 'd0,' conftest.$gl_asmext >/dev/null; then ++ gl_cv_host_cpu_c_abi=armhf ++ else ++ gl_cv_host_cpu_c_abi=arm ++ fi ++ rm -f conftest* ++ ]) ++ ;; ++ ++ hppa1.0 | hppa1.1 | hppa2.0* | hppa64 ) ++ # On hppa, the C compiler may be generating 32-bit code or 64-bit ++ # code. In the latter case, it defines _LP64 and __LP64__. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#ifdef __LP64__ ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi=hppa64], ++ [gl_cv_host_cpu_c_abi=hppa]) ++ ;; ++ ++ ia64* ) ++ # On ia64 on HP-UX, the C compiler may be generating 64-bit code or ++ # 32-bit code. In the latter case, it defines _ILP32. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#ifdef _ILP32 ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi=ia64-ilp32], ++ [gl_cv_host_cpu_c_abi=ia64]) ++ ;; ++ ++ mips* ) ++ # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this ++ # at 32. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64) ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi=mips64], ++ [# In the n32 ABI, _ABIN32 is defined, _ABIO32 is not defined (but ++ # may later get defined by <sgidefs.h>), and _MIPS_SIM == _ABIN32. ++ # In the 32 ABI, _ABIO32 is defined, _ABIN32 is not defined (but ++ # may later get defined by <sgidefs.h>), and _MIPS_SIM == _ABIO32. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if (_MIPS_SIM == _ABIN32) ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi=mipsn32], ++ [gl_cv_host_cpu_c_abi=mips])]) ++ ;; ++ ++ powerpc* ) ++ # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD. ++ # No need to distinguish them here; the caller may distinguish ++ # them based on the OS. ++ # On powerpc64 systems, the C compiler may still be generating ++ # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may ++ # be generating 64-bit code. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined __powerpc64__ || defined _ARCH_PPC64 ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [# On powerpc64, there are two ABIs on Linux: The AIX compatible ++ # one and the ELFv2 one. The latter defines _CALL_ELF=2. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined _CALL_ELF && _CALL_ELF == 2 ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi=powerpc64-elfv2], ++ [gl_cv_host_cpu_c_abi=powerpc64]) ++ ], ++ [gl_cv_host_cpu_c_abi=powerpc]) ++ ;; ++ ++ rs6000 ) ++ gl_cv_host_cpu_c_abi=powerpc ++ ;; ++ ++ riscv32 | riscv64 ) ++ # There are 2 architectures (with variants): rv32* and rv64*. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if __riscv_xlen == 64 ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [cpu=riscv64], ++ [cpu=riscv32]) ++ # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d. ++ # Size of 'long' and 'void *': ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined __LP64__ ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [main_abi=lp64], ++ [main_abi=ilp32]) ++ # Float ABIs: ++ # __riscv_float_abi_double: ++ # 'float' and 'double' are passed in floating-point registers. ++ # __riscv_float_abi_single: ++ # 'float' are passed in floating-point registers. ++ # __riscv_float_abi_soft: ++ # No values are passed in floating-point registers. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined __riscv_float_abi_double ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [float_abi=d], ++ [AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined __riscv_float_abi_single ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [float_abi=f], ++ [float_abi='']) ++ ]) ++ gl_cv_host_cpu_c_abi="${cpu}-${main_abi}${float_abi}" ++ ;; ++ ++ s390* ) ++ # On s390x, the C compiler may be generating 64-bit (= s390x) code ++ # or 31-bit (= s390) code. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined __LP64__ || defined __s390x__ ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi=s390x], ++ [gl_cv_host_cpu_c_abi=s390]) ++ ;; ++ ++ sparc | sparc64 ) ++ # UltraSPARCs running Linux have `uname -m` = "sparc64", but the ++ # C compiler still generates 32-bit code. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined __sparcv9 || defined __arch64__ ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi=sparc64], ++ [gl_cv_host_cpu_c_abi=sparc]) ++ ;; ++ ++ *) ++ gl_cv_host_cpu_c_abi="$host_cpu" ++ ;; ++ esac ++ ]) ++ ++ dnl In most cases, $HOST_CPU and $HOST_CPU_C_ABI are the same. ++ HOST_CPU=`echo "$gl_cv_host_cpu_c_abi" | sed -e 's/-.*//'` ++ HOST_CPU_C_ABI="$gl_cv_host_cpu_c_abi" ++ AC_SUBST([HOST_CPU]) ++ AC_SUBST([HOST_CPU_C_ABI]) ++ ++ # This was ++ # AC_DEFINE_UNQUOTED([__${HOST_CPU}__]) ++ # AC_DEFINE_UNQUOTED([__${HOST_CPU_C_ABI}__]) ++ # earlier, but KAI C++ 3.2d doesn't like this. ++ sed -e 's/-/_/g' >> confdefs.h <<EOF ++#ifndef __${HOST_CPU}__ ++#define __${HOST_CPU}__ 1 ++#endif ++#ifndef __${HOST_CPU_C_ABI}__ ++#define __${HOST_CPU_C_ABI}__ 1 ++#endif ++EOF ++ AH_TOP([/* CPU and C ABI indicator */ ++#ifndef __i386__ ++#undef __i386__ ++#endif ++#ifndef __x86_64_x32__ ++#undef __x86_64_x32__ ++#endif ++#ifndef __x86_64__ ++#undef __x86_64__ ++#endif ++#ifndef __alpha__ ++#undef __alpha__ ++#endif ++#ifndef __arm__ ++#undef __arm__ ++#endif ++#ifndef __armhf__ ++#undef __armhf__ ++#endif ++#ifndef __arm64_ilp32__ ++#undef __arm64_ilp32__ ++#endif ++#ifndef __arm64__ ++#undef __arm64__ ++#endif ++#ifndef __hppa__ ++#undef __hppa__ ++#endif ++#ifndef __hppa64__ ++#undef __hppa64__ ++#endif ++#ifndef __ia64_ilp32__ ++#undef __ia64_ilp32__ ++#endif ++#ifndef __ia64__ ++#undef __ia64__ ++#endif ++#ifndef __m68k__ ++#undef __m68k__ ++#endif ++#ifndef __mips__ ++#undef __mips__ ++#endif ++#ifndef __mipsn32__ ++#undef __mipsn32__ ++#endif ++#ifndef __mips64__ ++#undef __mips64__ ++#endif ++#ifndef __powerpc__ ++#undef __powerpc__ ++#endif ++#ifndef __powerpc64__ ++#undef __powerpc64__ ++#endif ++#ifndef __powerpc64_elfv2__ ++#undef __powerpc64_elfv2__ ++#endif ++#ifndef __riscv32__ ++#undef __riscv32__ ++#endif ++#ifndef __riscv64__ ++#undef __riscv64__ ++#endif ++#ifndef __riscv32_ilp32__ ++#undef __riscv32_ilp32__ ++#endif ++#ifndef __riscv32_ilp32f__ ++#undef __riscv32_ilp32f__ ++#endif ++#ifndef __riscv32_ilp32d__ ++#undef __riscv32_ilp32d__ ++#endif ++#ifndef __riscv64_ilp32__ ++#undef __riscv64_ilp32__ ++#endif ++#ifndef __riscv64_ilp32f__ ++#undef __riscv64_ilp32f__ ++#endif ++#ifndef __riscv64_ilp32d__ ++#undef __riscv64_ilp32d__ ++#endif ++#ifndef __riscv64_lp64__ ++#undef __riscv64_lp64__ ++#endif ++#ifndef __riscv64_lp64f__ ++#undef __riscv64_lp64f__ ++#endif ++#ifndef __riscv64_lp64d__ ++#undef __riscv64_lp64d__ ++#endif ++#ifndef __s390__ ++#undef __s390__ ++#endif ++#ifndef __s390x__ ++#undef __s390x__ ++#endif ++#ifndef __sh__ ++#undef __sh__ ++#endif ++#ifndef __sparc__ ++#undef __sparc__ ++#endif ++#ifndef __sparc64__ ++#undef __sparc64__ ++#endif ++]) ++ ++]) ++ ++ ++dnl Sets the HOST_CPU_C_ABI_32BIT variable to 'yes' if the C language ABI ++dnl (application binary interface) is a 32-bit one, or to 'no' otherwise. ++dnl This is a simplified variant of gl_HOST_CPU_C_ABI. ++AC_DEFUN([gl_HOST_CPU_C_ABI_32BIT], ++[ ++ AC_REQUIRE([AC_CANONICAL_HOST]) ++ AC_CACHE_CHECK([32-bit host C ABI], [gl_cv_host_cpu_c_abi_32bit], ++ [if test -n "$gl_cv_host_cpu_c_abi"; then ++ case "$gl_cv_host_cpu_c_abi" in ++ i386 | x86_64-x32 | arm | armhf | arm64-ilp32 | hppa | ia64-ilp32 | mips | mipsn32 | powerpc | riscv*-ilp32* | s390 | sparc) ++ gl_cv_host_cpu_c_abi_32bit=yes ;; ++ *) ++ gl_cv_host_cpu_c_abi_32bit=no ;; ++ esac ++ else ++ case "$host_cpu" in ++ ++changequote(,)dnl ++ i[4567]86 ) ++changequote([,])dnl ++ gl_cv_host_cpu_c_abi_32bit=yes ++ ;; ++ ++ x86_64 ) ++ # On x86_64 systems, the C compiler may be generating code in one of ++ # these ABIs: ++ # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64. ++ # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64 ++ # with native Windows (mingw, MSVC). ++ # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32. ++ # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if (defined __x86_64__ || defined __amd64__ \ ++ || defined _M_X64 || defined _M_AMD64) \ ++ && !(defined __ILP32__ || defined _ILP32) ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi_32bit=no], ++ [gl_cv_host_cpu_c_abi_32bit=yes]) ++ ;; ++ ++ arm* | aarch64 ) ++ # Assume arm with EABI. ++ # On arm64 systems, the C compiler may be generating code in one of ++ # these ABIs: ++ # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64. ++ # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32. ++ # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined __aarch64__ && !(defined __ILP32__ || defined _ILP32) ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi_32bit=no], ++ [gl_cv_host_cpu_c_abi_32bit=yes]) ++ ;; ++ ++ hppa1.0 | hppa1.1 | hppa2.0* | hppa64 ) ++ # On hppa, the C compiler may be generating 32-bit code or 64-bit ++ # code. In the latter case, it defines _LP64 and __LP64__. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#ifdef __LP64__ ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi_32bit=no], ++ [gl_cv_host_cpu_c_abi_32bit=yes]) ++ ;; ++ ++ ia64* ) ++ # On ia64 on HP-UX, the C compiler may be generating 64-bit code or ++ # 32-bit code. In the latter case, it defines _ILP32. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#ifdef _ILP32 ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi_32bit=yes], ++ [gl_cv_host_cpu_c_abi_32bit=no]) ++ ;; ++ ++ mips* ) ++ # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this ++ # at 32. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64) ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi_32bit=no], ++ [gl_cv_host_cpu_c_abi_32bit=yes]) ++ ;; ++ ++ powerpc* ) ++ # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD. ++ # No need to distinguish them here; the caller may distinguish ++ # them based on the OS. ++ # On powerpc64 systems, the C compiler may still be generating ++ # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may ++ # be generating 64-bit code. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined __powerpc64__ || defined _ARCH_PPC64 ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi_32bit=no], ++ [gl_cv_host_cpu_c_abi_32bit=yes]) ++ ;; ++ ++ rs6000 ) ++ gl_cv_host_cpu_c_abi_32bit=yes ++ ;; ++ ++ riscv32 | riscv64 ) ++ # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d. ++ # Size of 'long' and 'void *': ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined __LP64__ ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi_32bit=no], ++ [gl_cv_host_cpu_c_abi_32bit=yes]) ++ ;; ++ ++ s390* ) ++ # On s390x, the C compiler may be generating 64-bit (= s390x) code ++ # or 31-bit (= s390) code. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined __LP64__ || defined __s390x__ ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi_32bit=no], ++ [gl_cv_host_cpu_c_abi_32bit=yes]) ++ ;; ++ ++ sparc | sparc64 ) ++ # UltraSPARCs running Linux have `uname -m` = "sparc64", but the ++ # C compiler still generates 32-bit code. ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined __sparcv9 || defined __arch64__ ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_host_cpu_c_abi_32bit=no], ++ [gl_cv_host_cpu_c_abi_32bit=yes]) ++ ;; ++ ++ *) ++ gl_cv_host_cpu_c_abi_32bit=no ++ ;; ++ esac ++ fi ++ ]) ++ ++ HOST_CPU_C_ABI_32BIT="$gl_cv_host_cpu_c_abi_32bit" ++]) +diff -uprN clean/lrzsz-0.12.20/m4/iconv.m4 lrzsz-0.12.20/m4/iconv.m4 +--- clean/lrzsz-0.12.20/m4/iconv.m4 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/m4/iconv.m4 2019-11-25 18:21:18.000000000 +0000 +@@ -0,0 +1,288 @@ ++# iconv.m4 serial 21 ++dnl Copyright (C) 2000-2002, 2007-2014, 2016-2019 Free Software Foundation, ++dnl Inc. ++dnl This file is free software; the Free Software Foundation ++dnl gives unlimited permission to copy and/or distribute it, ++dnl with or without modifications, as long as this notice is preserved. ++ ++dnl From Bruno Haible. ++ ++AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], ++[ ++ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. ++ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) ++ AC_REQUIRE([AC_LIB_RPATH]) ++ ++ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV ++ dnl accordingly. ++ AC_LIB_LINKFLAGS_BODY([iconv]) ++]) ++ ++AC_DEFUN([AM_ICONV_LINK], ++[ ++ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and ++ dnl those with the standalone portable GNU libiconv installed). ++ AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles ++ ++ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV ++ dnl accordingly. ++ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) ++ ++ dnl Add $INCICONV to CPPFLAGS before performing the following checks, ++ dnl because if the user has installed libiconv and not disabled its use ++ dnl via --without-libiconv-prefix, he wants to use it. The first ++ dnl AC_LINK_IFELSE will then fail, the second AC_LINK_IFELSE will succeed. ++ am_save_CPPFLAGS="$CPPFLAGS" ++ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) ++ ++ AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [ ++ am_cv_func_iconv="no, consider installing GNU libiconv" ++ am_cv_lib_iconv=no ++ AC_LINK_IFELSE( ++ [AC_LANG_PROGRAM( ++ [[ ++#include <stdlib.h> ++#include <iconv.h> ++ ]], ++ [[iconv_t cd = iconv_open("",""); ++ iconv(cd,NULL,NULL,NULL,NULL); ++ iconv_close(cd);]])], ++ [am_cv_func_iconv=yes]) ++ if test "$am_cv_func_iconv" != yes; then ++ am_save_LIBS="$LIBS" ++ LIBS="$LIBS $LIBICONV" ++ AC_LINK_IFELSE( ++ [AC_LANG_PROGRAM( ++ [[ ++#include <stdlib.h> ++#include <iconv.h> ++ ]], ++ [[iconv_t cd = iconv_open("",""); ++ iconv(cd,NULL,NULL,NULL,NULL); ++ iconv_close(cd);]])], ++ [am_cv_lib_iconv=yes] ++ [am_cv_func_iconv=yes]) ++ LIBS="$am_save_LIBS" ++ fi ++ ]) ++ if test "$am_cv_func_iconv" = yes; then ++ AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [ ++ dnl This tests against bugs in AIX 5.1, AIX 6.1..7.1, HP-UX 11.11, ++ dnl Solaris 10. ++ am_save_LIBS="$LIBS" ++ if test $am_cv_lib_iconv = yes; then ++ LIBS="$LIBS $LIBICONV" ++ fi ++ am_cv_func_iconv_works=no ++ for ac_iconv_const in '' 'const'; do ++ AC_RUN_IFELSE( ++ [AC_LANG_PROGRAM( ++ [[ ++#include <iconv.h> ++#include <string.h> ++ ++#ifndef ICONV_CONST ++# define ICONV_CONST $ac_iconv_const ++#endif ++ ]], ++ [[int result = 0; ++ /* Test against AIX 5.1 bug: Failures are not distinguishable from successful ++ returns. */ ++ { ++ iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); ++ if (cd_utf8_to_88591 != (iconv_t)(-1)) ++ { ++ static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */ ++ char buf[10]; ++ ICONV_CONST char *inptr = input; ++ size_t inbytesleft = strlen (input); ++ char *outptr = buf; ++ size_t outbytesleft = sizeof (buf); ++ size_t res = iconv (cd_utf8_to_88591, ++ &inptr, &inbytesleft, ++ &outptr, &outbytesleft); ++ if (res == 0) ++ result |= 1; ++ iconv_close (cd_utf8_to_88591); ++ } ++ } ++ /* Test against Solaris 10 bug: Failures are not distinguishable from ++ successful returns. */ ++ { ++ iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); ++ if (cd_ascii_to_88591 != (iconv_t)(-1)) ++ { ++ static ICONV_CONST char input[] = "\263"; ++ char buf[10]; ++ ICONV_CONST char *inptr = input; ++ size_t inbytesleft = strlen (input); ++ char *outptr = buf; ++ size_t outbytesleft = sizeof (buf); ++ size_t res = iconv (cd_ascii_to_88591, ++ &inptr, &inbytesleft, ++ &outptr, &outbytesleft); ++ if (res == 0) ++ result |= 2; ++ iconv_close (cd_ascii_to_88591); ++ } ++ } ++ /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ ++ { ++ iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); ++ if (cd_88591_to_utf8 != (iconv_t)(-1)) ++ { ++ static ICONV_CONST char input[] = "\304"; ++ static char buf[2] = { (char)0xDE, (char)0xAD }; ++ ICONV_CONST char *inptr = input; ++ size_t inbytesleft = 1; ++ char *outptr = buf; ++ size_t outbytesleft = 1; ++ size_t res = iconv (cd_88591_to_utf8, ++ &inptr, &inbytesleft, ++ &outptr, &outbytesleft); ++ if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) ++ result |= 4; ++ iconv_close (cd_88591_to_utf8); ++ } ++ } ++#if 0 /* This bug could be worked around by the caller. */ ++ /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ ++ { ++ iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); ++ if (cd_88591_to_utf8 != (iconv_t)(-1)) ++ { ++ static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; ++ char buf[50]; ++ ICONV_CONST char *inptr = input; ++ size_t inbytesleft = strlen (input); ++ char *outptr = buf; ++ size_t outbytesleft = sizeof (buf); ++ size_t res = iconv (cd_88591_to_utf8, ++ &inptr, &inbytesleft, ++ &outptr, &outbytesleft); ++ if ((int)res > 0) ++ result |= 8; ++ iconv_close (cd_88591_to_utf8); ++ } ++ } ++#endif ++ /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is ++ provided. */ ++ { ++ /* Try standardized names. */ ++ iconv_t cd1 = iconv_open ("UTF-8", "EUC-JP"); ++ /* Try IRIX, OSF/1 names. */ ++ iconv_t cd2 = iconv_open ("UTF-8", "eucJP"); ++ /* Try AIX names. */ ++ iconv_t cd3 = iconv_open ("UTF-8", "IBM-eucJP"); ++ /* Try HP-UX names. */ ++ iconv_t cd4 = iconv_open ("utf8", "eucJP"); ++ if (cd1 == (iconv_t)(-1) && cd2 == (iconv_t)(-1) ++ && cd3 == (iconv_t)(-1) && cd4 == (iconv_t)(-1)) ++ result |= 16; ++ if (cd1 != (iconv_t)(-1)) ++ iconv_close (cd1); ++ if (cd2 != (iconv_t)(-1)) ++ iconv_close (cd2); ++ if (cd3 != (iconv_t)(-1)) ++ iconv_close (cd3); ++ if (cd4 != (iconv_t)(-1)) ++ iconv_close (cd4); ++ } ++ return result; ++]])], ++ [am_cv_func_iconv_works=yes], , ++ [case "$host_os" in ++ aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; ++ *) am_cv_func_iconv_works="guessing yes" ;; ++ esac]) ++ test "$am_cv_func_iconv_works" = no || break ++ done ++ LIBS="$am_save_LIBS" ++ ]) ++ case "$am_cv_func_iconv_works" in ++ *no) am_func_iconv=no am_cv_lib_iconv=no ;; ++ *) am_func_iconv=yes ;; ++ esac ++ else ++ am_func_iconv=no am_cv_lib_iconv=no ++ fi ++ if test "$am_func_iconv" = yes; then ++ AC_DEFINE([HAVE_ICONV], [1], ++ [Define if you have the iconv() function and it works.]) ++ fi ++ if test "$am_cv_lib_iconv" = yes; then ++ AC_MSG_CHECKING([how to link with libiconv]) ++ AC_MSG_RESULT([$LIBICONV]) ++ else ++ dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV ++ dnl either. ++ CPPFLAGS="$am_save_CPPFLAGS" ++ LIBICONV= ++ LTLIBICONV= ++ fi ++ AC_SUBST([LIBICONV]) ++ AC_SUBST([LTLIBICONV]) ++]) ++ ++dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to ++dnl avoid warnings like ++dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required". ++dnl This is tricky because of the way 'aclocal' is implemented: ++dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN. ++dnl Otherwise aclocal's initial scan pass would miss the macro definition. ++dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions. ++dnl Otherwise aclocal would emit many "Use of uninitialized value $1" ++dnl warnings. ++m4_define([gl_iconv_AC_DEFUN], ++ m4_version_prereq([2.64], ++ [[AC_DEFUN_ONCE( ++ [$1], [$2])]], ++ [m4_ifdef([gl_00GNULIB], ++ [[AC_DEFUN_ONCE( ++ [$1], [$2])]], ++ [[AC_DEFUN( ++ [$1], [$2])]])])) ++gl_iconv_AC_DEFUN([AM_ICONV], ++[ ++ AM_ICONV_LINK ++ if test "$am_cv_func_iconv" = yes; then ++ AC_MSG_CHECKING([for iconv declaration]) ++ AC_CACHE_VAL([am_cv_proto_iconv], [ ++ AC_COMPILE_IFELSE( ++ [AC_LANG_PROGRAM( ++ [[ ++#include <stdlib.h> ++#include <iconv.h> ++extern ++#ifdef __cplusplus ++"C" ++#endif ++#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) ++size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); ++#else ++size_t iconv(); ++#endif ++ ]], ++ [[]])], ++ [am_cv_proto_iconv_arg1=""], ++ [am_cv_proto_iconv_arg1="const"]) ++ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) ++ am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` ++ AC_MSG_RESULT([ ++ $am_cv_proto_iconv]) ++ else ++ dnl When compiling GNU libiconv on a system that does not have iconv yet, ++ dnl pick the POSIX compliant declaration without 'const'. ++ am_cv_proto_iconv_arg1="" ++ fi ++ AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1], ++ [Define as const if the declaration of iconv() needs const.]) ++ dnl Also substitute ICONV_CONST in the gnulib generated <iconv.h>. ++ m4_ifdef([gl_ICONV_H_DEFAULTS], ++ [AC_REQUIRE([gl_ICONV_H_DEFAULTS]) ++ if test -n "$am_cv_proto_iconv_arg1"; then ++ ICONV_CONST="const" ++ fi ++ ]) ++]) +diff -uprN clean/lrzsz-0.12.20/m4/intlmacosx.m4 lrzsz-0.12.20/m4/intlmacosx.m4 +--- clean/lrzsz-0.12.20/m4/intlmacosx.m4 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/m4/intlmacosx.m4 2019-11-25 18:21:18.000000000 +0000 +@@ -0,0 +1,72 @@ ++# intlmacosx.m4 serial 6 (gettext-0.20) ++dnl Copyright (C) 2004-2014, 2016, 2019 Free Software Foundation, Inc. ++dnl This file is free software; the Free Software Foundation ++dnl gives unlimited permission to copy and/or distribute it, ++dnl with or without modifications, as long as this notice is preserved. ++dnl ++dnl This file can be used in projects which are not available under ++dnl the GNU General Public License or the GNU Library General Public ++dnl License but which still want to provide support for the GNU gettext ++dnl functionality. ++dnl Please note that the actual code of the GNU gettext library is covered ++dnl by the GNU Library General Public License, and the rest of the GNU ++dnl gettext package is covered by the GNU General Public License. ++dnl They are *not* in the public domain. ++ ++dnl Checks for special options needed on Mac OS X. ++dnl Defines INTL_MACOSX_LIBS. ++AC_DEFUN([gt_INTL_MACOSX], ++[ ++ dnl Check for API introduced in Mac OS X 10.4. ++ AC_CACHE_CHECK([for CFPreferencesCopyAppValue], ++ [gt_cv_func_CFPreferencesCopyAppValue], ++ [gt_save_LIBS="$LIBS" ++ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" ++ AC_LINK_IFELSE( ++ [AC_LANG_PROGRAM( ++ [[#include <CoreFoundation/CFPreferences.h>]], ++ [[CFPreferencesCopyAppValue(NULL, NULL)]])], ++ [gt_cv_func_CFPreferencesCopyAppValue=yes], ++ [gt_cv_func_CFPreferencesCopyAppValue=no]) ++ LIBS="$gt_save_LIBS"]) ++ if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then ++ AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1], ++ [Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in the CoreFoundation framework.]) ++ fi ++ dnl Check for API introduced in Mac OS X 10.5. ++ AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent], ++ [gt_save_LIBS="$LIBS" ++ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" ++ AC_LINK_IFELSE( ++ [AC_LANG_PROGRAM( ++ [[#include <CoreFoundation/CFLocale.h>]], ++ [[CFLocaleCopyCurrent();]])], ++ [gt_cv_func_CFLocaleCopyCurrent=yes], ++ [gt_cv_func_CFLocaleCopyCurrent=no]) ++ LIBS="$gt_save_LIBS"]) ++ if test $gt_cv_func_CFLocaleCopyCurrent = yes; then ++ AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1], ++ [Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the CoreFoundation framework.]) ++ fi ++ AC_CACHE_CHECK([for CFLocaleCopyPreferredLanguages], [gt_cv_func_CFLocaleCopyPreferredLanguages], ++ [gt_save_LIBS="$LIBS" ++ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" ++ AC_LINK_IFELSE( ++ [AC_LANG_PROGRAM( ++ [[#include <CoreFoundation/CFLocale.h>]], ++ [[CFLocaleCopyPreferredLanguages();]])], ++ [gt_cv_func_CFLocaleCopyPreferredLanguages=yes], ++ [gt_cv_func_CFLocaleCopyPreferredLanguages=no]) ++ LIBS="$gt_save_LIBS"]) ++ if test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then ++ AC_DEFINE([HAVE_CFLOCALECOPYPREFERREDLANGUAGES], [1], ++ [Define to 1 if you have the Mac OS X function CFLocaleCopyPreferredLanguages in the CoreFoundation framework.]) ++ fi ++ INTL_MACOSX_LIBS= ++ if test $gt_cv_func_CFPreferencesCopyAppValue = yes \ ++ || test $gt_cv_func_CFLocaleCopyCurrent = yes \ ++ || test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then ++ INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" ++ fi ++ AC_SUBST([INTL_MACOSX_LIBS]) ++]) +diff -uprN clean/lrzsz-0.12.20/m4/lib-ld.m4 lrzsz-0.12.20/m4/lib-ld.m4 +--- clean/lrzsz-0.12.20/m4/lib-ld.m4 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/m4/lib-ld.m4 2019-11-25 18:21:18.000000000 +0000 +@@ -0,0 +1,168 @@ ++# lib-ld.m4 serial 9 ++dnl Copyright (C) 1996-2003, 2009-2019 Free Software Foundation, Inc. ++dnl This file is free software; the Free Software Foundation ++dnl gives unlimited permission to copy and/or distribute it, ++dnl with or without modifications, as long as this notice is preserved. ++ ++dnl Subroutines of libtool.m4, ++dnl with replacements s/_*LT_PATH/AC_LIB_PROG/ and s/lt_/acl_/ to avoid ++dnl collision with libtool.m4. ++ ++dnl From libtool-2.4. Sets the variable with_gnu_ld to yes or no. ++AC_DEFUN([AC_LIB_PROG_LD_GNU], ++[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld], ++[# I'd rather use --version here, but apparently some GNU lds only accept -v. ++case `$LD -v 2>&1 </dev/null` in ++*GNU* | *'with BFD'*) ++ acl_cv_prog_gnu_ld=yes ++ ;; ++*) ++ acl_cv_prog_gnu_ld=no ++ ;; ++esac]) ++with_gnu_ld=$acl_cv_prog_gnu_ld ++]) ++ ++dnl From libtool-2.4. Sets the variable LD. ++AC_DEFUN([AC_LIB_PROG_LD], ++[AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([AC_CANONICAL_HOST])dnl ++ ++AC_ARG_WITH([gnu-ld], ++ [AS_HELP_STRING([--with-gnu-ld], ++ [assume the C compiler uses GNU ld [default=no]])], ++ [test "$withval" = no || with_gnu_ld=yes], ++ [with_gnu_ld=no])dnl ++ ++# Prepare PATH_SEPARATOR. ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which ++ # contains only /bin. Note that ksh looks also at the FPATH variable, ++ # so we have to set that as well for the test. ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ ++ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ ++ || PATH_SEPARATOR=';' ++ } ++fi ++ ++if test -n "$LD"; then ++ AC_MSG_CHECKING([for ld]) ++elif test "$GCC" = yes; then ++ AC_MSG_CHECKING([for ld used by $CC]) ++elif test "$with_gnu_ld" = yes; then ++ AC_MSG_CHECKING([for GNU ld]) ++else ++ AC_MSG_CHECKING([for non-GNU ld]) ++fi ++if test -n "$LD"; then ++ # Let the user override the test with a path. ++ : ++else ++ AC_CACHE_VAL([acl_cv_path_LD], ++ [ ++ acl_cv_path_LD= # Final result of this test ++ ac_prog=ld # Program to search in $PATH ++ if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ acl_output=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ acl_output=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $acl_output in ++ # Accept absolute paths. ++ [[\\/]]* | ?:[[\\/]]*) ++ re_direlt='/[[^/]][[^/]]*/\.\./' ++ # Canonicalize the pathname of ld ++ acl_output=`echo "$acl_output" | sed 's%\\\\%/%g'` ++ while echo "$acl_output" | grep "$re_direlt" > /dev/null 2>&1; do ++ acl_output=`echo $acl_output | sed "s%$re_direlt%/%"` ++ done ++ # Got the pathname. No search in PATH is needed. ++ acl_cv_path_LD="$acl_output" ++ ac_prog= ++ ;; ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++ fi ++ if test -n "$ac_prog"; then ++ # Search for $ac_prog in $PATH. ++ acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$acl_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ acl_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$acl_cv_path_LD" -v 2>&1 </dev/null` in ++ *GNU* | *'with BFD'*) ++ test "$with_gnu_ld" != no && break ++ ;; ++ *) ++ test "$with_gnu_ld" != yes && break ++ ;; ++ esac ++ fi ++ done ++ IFS="$acl_save_ifs" ++ fi ++ case $host in ++ *-*-aix*) ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined __powerpc64__ || defined _ARCH_PPC64 ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [# The compiler produces 64-bit code. Add option '-b64' so that the ++ # linker groks 64-bit object files. ++ case "$acl_cv_path_LD " in ++ *" -b64 "*) ;; ++ *) acl_cv_path_LD="$acl_cv_path_LD -b64" ;; ++ esac ++ ], []) ++ ;; ++ sparc64-*-netbsd*) ++ AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#if defined __sparcv9 || defined __arch64__ ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [], ++ [# The compiler produces 32-bit code. Add option '-m elf32_sparc' ++ # so that the linker groks 32-bit object files. ++ case "$acl_cv_path_LD " in ++ *" -m elf32_sparc "*) ;; ++ *) acl_cv_path_LD="$acl_cv_path_LD -m elf32_sparc" ;; ++ esac ++ ]) ++ ;; ++ esac ++ ]) ++ LD="$acl_cv_path_LD" ++fi ++if test -n "$LD"; then ++ AC_MSG_RESULT([$LD]) ++else ++ AC_MSG_RESULT([no]) ++ AC_MSG_ERROR([no acceptable ld found in \$PATH]) ++fi ++AC_LIB_PROG_LD_GNU ++]) +diff -uprN clean/lrzsz-0.12.20/m4/lib-link.m4 lrzsz-0.12.20/m4/lib-link.m4 +--- clean/lrzsz-0.12.20/m4/lib-link.m4 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/m4/lib-link.m4 2019-11-25 18:21:18.000000000 +0000 +@@ -0,0 +1,774 @@ ++# lib-link.m4 serial 28 ++dnl Copyright (C) 2001-2019 Free Software Foundation, Inc. ++dnl This file is free software; the Free Software Foundation ++dnl gives unlimited permission to copy and/or distribute it, ++dnl with or without modifications, as long as this notice is preserved. ++ ++dnl From Bruno Haible. ++ ++AC_PREREQ([2.61]) ++ ++dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and ++dnl the libraries corresponding to explicit and implicit dependencies. ++dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and ++dnl augments the CPPFLAGS variable. ++dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname ++dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. ++AC_DEFUN([AC_LIB_LINKFLAGS], ++[ ++ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) ++ AC_REQUIRE([AC_LIB_RPATH]) ++ pushdef([Name],[m4_translit([$1],[./+-], [____])]) ++ pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], ++ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) ++ AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ ++ AC_LIB_LINKFLAGS_BODY([$1], [$2]) ++ ac_cv_lib[]Name[]_libs="$LIB[]NAME" ++ ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" ++ ac_cv_lib[]Name[]_cppflags="$INC[]NAME" ++ ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX" ++ ]) ++ LIB[]NAME="$ac_cv_lib[]Name[]_libs" ++ LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" ++ INC[]NAME="$ac_cv_lib[]Name[]_cppflags" ++ LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix" ++ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) ++ AC_SUBST([LIB]NAME) ++ AC_SUBST([LTLIB]NAME) ++ AC_SUBST([LIB]NAME[_PREFIX]) ++ dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the ++ dnl results of this search when this library appears as a dependency. ++ HAVE_LIB[]NAME=yes ++ popdef([NAME]) ++ popdef([Name]) ++]) ++ ++dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message]) ++dnl searches for libname and the libraries corresponding to explicit and ++dnl implicit dependencies, together with the specified include files and ++dnl the ability to compile and link the specified testcode. The missing-message ++dnl defaults to 'no' and may contain additional hints for the user. ++dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} ++dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and ++dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs ++dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. ++dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname ++dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. ++AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], ++[ ++ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) ++ AC_REQUIRE([AC_LIB_RPATH]) ++ pushdef([Name],[m4_translit([$1],[./+-], [____])]) ++ pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], ++ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) ++ ++ dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME ++ dnl accordingly. ++ AC_LIB_LINKFLAGS_BODY([$1], [$2]) ++ ++ dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, ++ dnl because if the user has installed lib[]Name and not disabled its use ++ dnl via --without-lib[]Name-prefix, he wants to use it. ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) ++ ++ AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ ++ ac_save_LIBS="$LIBS" ++ dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS, ++ dnl because these -l options might require -L options that are present in ++ dnl LIBS. -l options benefit only from the -L options listed before it. ++ dnl Otherwise, add it to the front of LIBS, because it may be a static ++ dnl library that depends on another static library that is present in LIBS. ++ dnl Static libraries benefit only from the static libraries listed after ++ dnl it. ++ case " $LIB[]NAME" in ++ *" -l"*) LIBS="$LIBS $LIB[]NAME" ;; ++ *) LIBS="$LIB[]NAME $LIBS" ;; ++ esac ++ AC_LINK_IFELSE( ++ [AC_LANG_PROGRAM([[$3]], [[$4]])], ++ [ac_cv_lib[]Name=yes], ++ [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])']) ++ LIBS="$ac_save_LIBS" ++ ]) ++ if test "$ac_cv_lib[]Name" = yes; then ++ HAVE_LIB[]NAME=yes ++ AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.]) ++ AC_MSG_CHECKING([how to link with lib[]$1]) ++ AC_MSG_RESULT([$LIB[]NAME]) ++ else ++ HAVE_LIB[]NAME=no ++ dnl If $LIB[]NAME didn't lead to a usable library, we don't need ++ dnl $INC[]NAME either. ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ LIB[]NAME= ++ LTLIB[]NAME= ++ LIB[]NAME[]_PREFIX= ++ fi ++ AC_SUBST([HAVE_LIB]NAME) ++ AC_SUBST([LIB]NAME) ++ AC_SUBST([LTLIB]NAME) ++ AC_SUBST([LIB]NAME[_PREFIX]) ++ popdef([NAME]) ++ popdef([Name]) ++]) ++ ++dnl Determine the platform dependent parameters needed to use rpath: ++dnl acl_libext, ++dnl acl_shlibext, ++dnl acl_libname_spec, ++dnl acl_library_names_spec, ++dnl acl_hardcode_libdir_flag_spec, ++dnl acl_hardcode_libdir_separator, ++dnl acl_hardcode_direct, ++dnl acl_hardcode_minus_L. ++AC_DEFUN([AC_LIB_RPATH], ++[ ++ dnl Complain if config.rpath is missing. ++ AC_REQUIRE_AUX_FILE([config.rpath]) ++ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS ++ AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld ++ AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host ++ AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir ++ AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [ ++ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ++ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh ++ . ./conftest.sh ++ rm -f ./conftest.sh ++ acl_cv_rpath=done ++ ]) ++ wl="$acl_cv_wl" ++ acl_libext="$acl_cv_libext" ++ acl_shlibext="$acl_cv_shlibext" ++ acl_libname_spec="$acl_cv_libname_spec" ++ acl_library_names_spec="$acl_cv_library_names_spec" ++ acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" ++ acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" ++ acl_hardcode_direct="$acl_cv_hardcode_direct" ++ acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" ++ dnl Determine whether the user wants rpath handling at all. ++ AC_ARG_ENABLE([rpath], ++ [ --disable-rpath do not hardcode runtime library paths], ++ :, enable_rpath=yes) ++]) ++ ++dnl AC_LIB_FROMPACKAGE(name, package) ++dnl declares that libname comes from the given package. The configure file ++dnl will then not have a --with-libname-prefix option but a ++dnl --with-package-prefix option. Several libraries can come from the same ++dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar ++dnl macro call that searches for libname. ++AC_DEFUN([AC_LIB_FROMPACKAGE], ++[ ++ pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], ++ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) ++ define([acl_frompackage_]NAME, [$2]) ++ popdef([NAME]) ++ pushdef([PACK],[$2]) ++ pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-], ++ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) ++ define([acl_libsinpackage_]PACKUP, ++ m4_ifdef([acl_libsinpackage_]PACKUP, [m4_defn([acl_libsinpackage_]PACKUP)[, ]],)[lib$1]) ++ popdef([PACKUP]) ++ popdef([PACK]) ++]) ++ ++dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and ++dnl the libraries corresponding to explicit and implicit dependencies. ++dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. ++dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found ++dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem. ++AC_DEFUN([AC_LIB_LINKFLAGS_BODY], ++[ ++ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) ++ pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], ++ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) ++ pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])]) ++ pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-], ++ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) ++ pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])]) ++ dnl By default, look in $includedir and $libdir. ++ use_additional=yes ++ AC_LIB_WITH_FINAL_PREFIX([ ++ eval additional_includedir=\"$includedir\" ++ eval additional_libdir=\"$libdir\" ++ ]) ++ AC_ARG_WITH(PACK[-prefix], ++[[ --with-]]PACK[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib ++ --without-]]PACK[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]], ++[ ++ if test "X$withval" = "Xno"; then ++ use_additional=no ++ else ++ if test "X$withval" = "X"; then ++ AC_LIB_WITH_FINAL_PREFIX([ ++ eval additional_includedir=\"$includedir\" ++ eval additional_libdir=\"$libdir\" ++ ]) ++ else ++ additional_includedir="$withval/include" ++ additional_libdir="$withval/$acl_libdirstem" ++ if test "$acl_libdirstem2" != "$acl_libdirstem" \ ++ && test ! -d "$withval/$acl_libdirstem"; then ++ additional_libdir="$withval/$acl_libdirstem2" ++ fi ++ fi ++ fi ++]) ++ dnl Search the library and its dependencies in $additional_libdir and ++ dnl $LDFLAGS. Using breadth-first-seach. ++ LIB[]NAME= ++ LTLIB[]NAME= ++ INC[]NAME= ++ LIB[]NAME[]_PREFIX= ++ dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been ++ dnl computed. So it has to be reset here. ++ HAVE_LIB[]NAME= ++ rpathdirs= ++ ltrpathdirs= ++ names_already_handled= ++ names_next_round='$1 $2' ++ while test -n "$names_next_round"; do ++ names_this_round="$names_next_round" ++ names_next_round= ++ for name in $names_this_round; do ++ already_handled= ++ for n in $names_already_handled; do ++ if test "$n" = "$name"; then ++ already_handled=yes ++ break ++ fi ++ done ++ if test -z "$already_handled"; then ++ names_already_handled="$names_already_handled $name" ++ dnl See if it was already located by an earlier AC_LIB_LINKFLAGS ++ dnl or AC_LIB_HAVE_LINKFLAGS call. ++ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` ++ eval value=\"\$HAVE_LIB$uppername\" ++ if test -n "$value"; then ++ if test "$value" = yes; then ++ eval value=\"\$LIB$uppername\" ++ test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" ++ eval value=\"\$LTLIB$uppername\" ++ test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" ++ else ++ dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined ++ dnl that this library doesn't exist. So just drop it. ++ : ++ fi ++ else ++ dnl Search the library lib$name in $additional_libdir and $LDFLAGS ++ dnl and the already constructed $LIBNAME/$LTLIBNAME. ++ found_dir= ++ found_la= ++ found_so= ++ found_a= ++ eval libname=\"$acl_libname_spec\" # typically: libname=lib$name ++ if test -n "$acl_shlibext"; then ++ shrext=".$acl_shlibext" # typically: shrext=.so ++ else ++ shrext= ++ fi ++ if test $use_additional = yes; then ++ dir="$additional_libdir" ++ dnl The same code as in the loop below: ++ dnl First look for a shared library. ++ if test -n "$acl_shlibext"; then ++ if test -f "$dir/$libname$shrext"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext" ++ else ++ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ++ ver=`(cd "$dir" && \ ++ for f in "$libname$shrext".*; do echo "$f"; done \ ++ | sed -e "s,^$libname$shrext\\\\.,," \ ++ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ ++ | sed 1q ) 2>/dev/null` ++ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext.$ver" ++ fi ++ else ++ eval library_names=\"$acl_library_names_spec\" ++ for f in $library_names; do ++ if test -f "$dir/$f"; then ++ found_dir="$dir" ++ found_so="$dir/$f" ++ break ++ fi ++ done ++ fi ++ fi ++ fi ++ dnl Then look for a static library. ++ if test "X$found_dir" = "X"; then ++ if test -f "$dir/$libname.$acl_libext"; then ++ found_dir="$dir" ++ found_a="$dir/$libname.$acl_libext" ++ fi ++ fi ++ if test "X$found_dir" != "X"; then ++ if test -f "$dir/$libname.la"; then ++ found_la="$dir/$libname.la" ++ fi ++ fi ++ fi ++ if test "X$found_dir" = "X"; then ++ for x in $LDFLAGS $LTLIB[]NAME; do ++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) ++ case "$x" in ++ -L*) ++ dir=`echo "X$x" | sed -e 's/^X-L//'` ++ dnl First look for a shared library. ++ if test -n "$acl_shlibext"; then ++ if test -f "$dir/$libname$shrext"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext" ++ else ++ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ++ ver=`(cd "$dir" && \ ++ for f in "$libname$shrext".*; do echo "$f"; done \ ++ | sed -e "s,^$libname$shrext\\\\.,," \ ++ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ ++ | sed 1q ) 2>/dev/null` ++ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext.$ver" ++ fi ++ else ++ eval library_names=\"$acl_library_names_spec\" ++ for f in $library_names; do ++ if test -f "$dir/$f"; then ++ found_dir="$dir" ++ found_so="$dir/$f" ++ break ++ fi ++ done ++ fi ++ fi ++ fi ++ dnl Then look for a static library. ++ if test "X$found_dir" = "X"; then ++ if test -f "$dir/$libname.$acl_libext"; then ++ found_dir="$dir" ++ found_a="$dir/$libname.$acl_libext" ++ fi ++ fi ++ if test "X$found_dir" != "X"; then ++ if test -f "$dir/$libname.la"; then ++ found_la="$dir/$libname.la" ++ fi ++ fi ++ ;; ++ esac ++ if test "X$found_dir" != "X"; then ++ break ++ fi ++ done ++ fi ++ if test "X$found_dir" != "X"; then ++ dnl Found the library. ++ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" ++ if test "X$found_so" != "X"; then ++ dnl Linking with a shared library. We attempt to hardcode its ++ dnl directory into the executable's runpath, unless it's the ++ dnl standard /usr/lib. ++ if test "$enable_rpath" = no \ ++ || test "X$found_dir" = "X/usr/$acl_libdirstem" \ ++ || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then ++ dnl No hardcoding is needed. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" ++ else ++ dnl Use an explicit option to hardcode DIR into the resulting ++ dnl binary. ++ dnl Potentially add DIR to ltrpathdirs. ++ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. ++ haveit= ++ for x in $ltrpathdirs; do ++ if test "X$x" = "X$found_dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ ltrpathdirs="$ltrpathdirs $found_dir" ++ fi ++ dnl The hardcoding into $LIBNAME is system dependent. ++ if test "$acl_hardcode_direct" = yes; then ++ dnl Using DIR/libNAME.so during linking hardcodes DIR into the ++ dnl resulting binary. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" ++ else ++ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then ++ dnl Use an explicit option to hardcode DIR into the resulting ++ dnl binary. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" ++ dnl Potentially add DIR to rpathdirs. ++ dnl The rpathdirs will be appended to $LIBNAME at the end. ++ haveit= ++ for x in $rpathdirs; do ++ if test "X$x" = "X$found_dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ rpathdirs="$rpathdirs $found_dir" ++ fi ++ else ++ dnl Rely on "-L$found_dir". ++ dnl But don't add it if it's already contained in the LDFLAGS ++ dnl or the already constructed $LIBNAME ++ haveit= ++ for x in $LDFLAGS $LIB[]NAME; do ++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) ++ if test "X$x" = "X-L$found_dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" ++ fi ++ if test "$acl_hardcode_minus_L" != no; then ++ dnl FIXME: Not sure whether we should use ++ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" ++ dnl here. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" ++ else ++ dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH ++ dnl here, because this doesn't fit in flags passed to the ++ dnl compiler. So give up. No hardcoding. This affects only ++ dnl very old systems. ++ dnl FIXME: Not sure whether we should use ++ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" ++ dnl here. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" ++ fi ++ fi ++ fi ++ fi ++ else ++ if test "X$found_a" != "X"; then ++ dnl Linking with a static library. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" ++ else ++ dnl We shouldn't come here, but anyway it's good to have a ++ dnl fallback. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" ++ fi ++ fi ++ dnl Assume the include files are nearby. ++ additional_includedir= ++ case "$found_dir" in ++ */$acl_libdirstem | */$acl_libdirstem/) ++ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` ++ if test "$name" = '$1'; then ++ LIB[]NAME[]_PREFIX="$basedir" ++ fi ++ additional_includedir="$basedir/include" ++ ;; ++ */$acl_libdirstem2 | */$acl_libdirstem2/) ++ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` ++ if test "$name" = '$1'; then ++ LIB[]NAME[]_PREFIX="$basedir" ++ fi ++ additional_includedir="$basedir/include" ++ ;; ++ esac ++ if test "X$additional_includedir" != "X"; then ++ dnl Potentially add $additional_includedir to $INCNAME. ++ dnl But don't add it ++ dnl 1. if it's the standard /usr/include, ++ dnl 2. if it's /usr/local/include and we are using GCC on Linux, ++ dnl 3. if it's already present in $CPPFLAGS or the already ++ dnl constructed $INCNAME, ++ dnl 4. if it doesn't exist as a directory. ++ if test "X$additional_includedir" != "X/usr/include"; then ++ haveit= ++ if test "X$additional_includedir" = "X/usr/local/include"; then ++ if test -n "$GCC"; then ++ case $host_os in ++ linux* | gnu* | k*bsd*-gnu) haveit=yes;; ++ esac ++ fi ++ fi ++ if test -z "$haveit"; then ++ for x in $CPPFLAGS $INC[]NAME; do ++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) ++ if test "X$x" = "X-I$additional_includedir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ if test -d "$additional_includedir"; then ++ dnl Really add $additional_includedir to $INCNAME. ++ INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" ++ fi ++ fi ++ fi ++ fi ++ fi ++ dnl Look for dependencies. ++ if test -n "$found_la"; then ++ dnl Read the .la file. It defines the variables ++ dnl dlname, library_names, old_library, dependency_libs, current, ++ dnl age, revision, installed, dlopen, dlpreopen, libdir. ++ save_libdir="$libdir" ++ case "$found_la" in ++ */* | *\\*) . "$found_la" ;; ++ *) . "./$found_la" ;; ++ esac ++ libdir="$save_libdir" ++ dnl We use only dependency_libs. ++ for dep in $dependency_libs; do ++ case "$dep" in ++ -L*) ++ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` ++ dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. ++ dnl But don't add it ++ dnl 1. if it's the standard /usr/lib, ++ dnl 2. if it's /usr/local/lib and we are using GCC on Linux, ++ dnl 3. if it's already present in $LDFLAGS or the already ++ dnl constructed $LIBNAME, ++ dnl 4. if it doesn't exist as a directory. ++ if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ ++ && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then ++ haveit= ++ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ ++ || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then ++ if test -n "$GCC"; then ++ case $host_os in ++ linux* | gnu* | k*bsd*-gnu) haveit=yes;; ++ esac ++ fi ++ fi ++ if test -z "$haveit"; then ++ haveit= ++ for x in $LDFLAGS $LIB[]NAME; do ++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) ++ if test "X$x" = "X-L$additional_libdir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ if test -d "$additional_libdir"; then ++ dnl Really add $additional_libdir to $LIBNAME. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" ++ fi ++ fi ++ haveit= ++ for x in $LDFLAGS $LTLIB[]NAME; do ++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) ++ if test "X$x" = "X-L$additional_libdir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ if test -d "$additional_libdir"; then ++ dnl Really add $additional_libdir to $LTLIBNAME. ++ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" ++ fi ++ fi ++ fi ++ fi ++ ;; ++ -R*) ++ dir=`echo "X$dep" | sed -e 's/^X-R//'` ++ if test "$enable_rpath" != no; then ++ dnl Potentially add DIR to rpathdirs. ++ dnl The rpathdirs will be appended to $LIBNAME at the end. ++ haveit= ++ for x in $rpathdirs; do ++ if test "X$x" = "X$dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ rpathdirs="$rpathdirs $dir" ++ fi ++ dnl Potentially add DIR to ltrpathdirs. ++ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. ++ haveit= ++ for x in $ltrpathdirs; do ++ if test "X$x" = "X$dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ ltrpathdirs="$ltrpathdirs $dir" ++ fi ++ fi ++ ;; ++ -l*) ++ dnl Handle this in the next round. ++ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ++ ;; ++ *.la) ++ dnl Handle this in the next round. Throw away the .la's ++ dnl directory; it is already contained in a preceding -L ++ dnl option. ++ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ++ ;; ++ *) ++ dnl Most likely an immediate library name. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" ++ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" ++ ;; ++ esac ++ done ++ fi ++ else ++ dnl Didn't find the library; assume it is in the system directories ++ dnl known to the linker and runtime loader. (All the system ++ dnl directories known to the linker should also be known to the ++ dnl runtime loader, otherwise the system is severely misconfigured.) ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" ++ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" ++ fi ++ fi ++ fi ++ done ++ done ++ if test "X$rpathdirs" != "X"; then ++ if test -n "$acl_hardcode_libdir_separator"; then ++ dnl Weird platform: only the last -rpath option counts, the user must ++ dnl pass all path elements in one option. We can arrange that for a ++ dnl single library, but not when more than one $LIBNAMEs are used. ++ alldirs= ++ for found_dir in $rpathdirs; do ++ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" ++ done ++ dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl. ++ acl_save_libdir="$libdir" ++ libdir="$alldirs" ++ eval flag=\"$acl_hardcode_libdir_flag_spec\" ++ libdir="$acl_save_libdir" ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" ++ else ++ dnl The -rpath options are cumulative. ++ for found_dir in $rpathdirs; do ++ acl_save_libdir="$libdir" ++ libdir="$found_dir" ++ eval flag=\"$acl_hardcode_libdir_flag_spec\" ++ libdir="$acl_save_libdir" ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" ++ done ++ fi ++ fi ++ if test "X$ltrpathdirs" != "X"; then ++ dnl When using libtool, the option that works for both libraries and ++ dnl executables is -R. The -R options are cumulative. ++ for found_dir in $ltrpathdirs; do ++ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" ++ done ++ fi ++ popdef([PACKLIBS]) ++ popdef([PACKUP]) ++ popdef([PACK]) ++ popdef([NAME]) ++]) ++ ++dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, ++dnl unless already present in VAR. ++dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes ++dnl contains two or three consecutive elements that belong together. ++AC_DEFUN([AC_LIB_APPENDTOVAR], ++[ ++ for element in [$2]; do ++ haveit= ++ for x in $[$1]; do ++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) ++ if test "X$x" = "X$element"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ [$1]="${[$1]}${[$1]:+ }$element" ++ fi ++ done ++]) ++ ++dnl For those cases where a variable contains several -L and -l options ++dnl referring to unknown libraries and directories, this macro determines the ++dnl necessary additional linker options for the runtime path. ++dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) ++dnl sets LDADDVAR to linker options needed together with LIBSVALUE. ++dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, ++dnl otherwise linking without libtool is assumed. ++AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], ++[ ++ AC_REQUIRE([AC_LIB_RPATH]) ++ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) ++ $1= ++ if test "$enable_rpath" != no; then ++ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then ++ dnl Use an explicit option to hardcode directories into the resulting ++ dnl binary. ++ rpathdirs= ++ next= ++ for opt in $2; do ++ if test -n "$next"; then ++ dir="$next" ++ dnl No need to hardcode the standard /usr/lib. ++ if test "X$dir" != "X/usr/$acl_libdirstem" \ ++ && test "X$dir" != "X/usr/$acl_libdirstem2"; then ++ rpathdirs="$rpathdirs $dir" ++ fi ++ next= ++ else ++ case $opt in ++ -L) next=yes ;; ++ -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` ++ dnl No need to hardcode the standard /usr/lib. ++ if test "X$dir" != "X/usr/$acl_libdirstem" \ ++ && test "X$dir" != "X/usr/$acl_libdirstem2"; then ++ rpathdirs="$rpathdirs $dir" ++ fi ++ next= ;; ++ *) next= ;; ++ esac ++ fi ++ done ++ if test "X$rpathdirs" != "X"; then ++ if test -n ""$3""; then ++ dnl libtool is used for linking. Use -R options. ++ for dir in $rpathdirs; do ++ $1="${$1}${$1:+ }-R$dir" ++ done ++ else ++ dnl The linker is used for linking directly. ++ if test -n "$acl_hardcode_libdir_separator"; then ++ dnl Weird platform: only the last -rpath option counts, the user ++ dnl must pass all path elements in one option. ++ alldirs= ++ for dir in $rpathdirs; do ++ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir" ++ done ++ acl_save_libdir="$libdir" ++ libdir="$alldirs" ++ eval flag=\"$acl_hardcode_libdir_flag_spec\" ++ libdir="$acl_save_libdir" ++ $1="$flag" ++ else ++ dnl The -rpath options are cumulative. ++ for dir in $rpathdirs; do ++ acl_save_libdir="$libdir" ++ libdir="$dir" ++ eval flag=\"$acl_hardcode_libdir_flag_spec\" ++ libdir="$acl_save_libdir" ++ $1="${$1}${$1:+ }$flag" ++ done ++ fi ++ fi ++ fi ++ fi ++ fi ++ AC_SUBST([$1]) ++]) +diff -uprN clean/lrzsz-0.12.20/m4/lib-prefix.m4 lrzsz-0.12.20/m4/lib-prefix.m4 +--- clean/lrzsz-0.12.20/m4/lib-prefix.m4 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/m4/lib-prefix.m4 2019-11-25 18:21:18.000000000 +0000 +@@ -0,0 +1,249 @@ ++# lib-prefix.m4 serial 14 ++dnl Copyright (C) 2001-2005, 2008-2019 Free Software Foundation, Inc. ++dnl This file is free software; the Free Software Foundation ++dnl gives unlimited permission to copy and/or distribute it, ++dnl with or without modifications, as long as this notice is preserved. ++ ++dnl From Bruno Haible. ++ ++dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed ++dnl to access previously installed libraries. The basic assumption is that ++dnl a user will want packages to use other packages he previously installed ++dnl with the same --prefix option. ++dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate ++dnl libraries, but is otherwise very convenient. ++AC_DEFUN([AC_LIB_PREFIX], ++[ ++ AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) ++ AC_REQUIRE([AC_PROG_CC]) ++ AC_REQUIRE([AC_CANONICAL_HOST]) ++ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) ++ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) ++ dnl By default, look in $includedir and $libdir. ++ use_additional=yes ++ AC_LIB_WITH_FINAL_PREFIX([ ++ eval additional_includedir=\"$includedir\" ++ eval additional_libdir=\"$libdir\" ++ ]) ++ AC_ARG_WITH([lib-prefix], ++[[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib ++ --without-lib-prefix don't search for libraries in includedir and libdir]], ++[ ++ if test "X$withval" = "Xno"; then ++ use_additional=no ++ else ++ if test "X$withval" = "X"; then ++ AC_LIB_WITH_FINAL_PREFIX([ ++ eval additional_includedir=\"$includedir\" ++ eval additional_libdir=\"$libdir\" ++ ]) ++ else ++ additional_includedir="$withval/include" ++ additional_libdir="$withval/$acl_libdirstem" ++ fi ++ fi ++]) ++ if test $use_additional = yes; then ++ dnl Potentially add $additional_includedir to $CPPFLAGS. ++ dnl But don't add it ++ dnl 1. if it's the standard /usr/include, ++ dnl 2. if it's already present in $CPPFLAGS, ++ dnl 3. if it's /usr/local/include and we are using GCC on Linux, ++ dnl 4. if it doesn't exist as a directory. ++ if test "X$additional_includedir" != "X/usr/include"; then ++ haveit= ++ for x in $CPPFLAGS; do ++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) ++ if test "X$x" = "X-I$additional_includedir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ if test "X$additional_includedir" = "X/usr/local/include"; then ++ if test -n "$GCC"; then ++ case $host_os in ++ linux* | gnu* | k*bsd*-gnu) haveit=yes;; ++ esac ++ fi ++ fi ++ if test -z "$haveit"; then ++ if test -d "$additional_includedir"; then ++ dnl Really add $additional_includedir to $CPPFLAGS. ++ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" ++ fi ++ fi ++ fi ++ fi ++ dnl Potentially add $additional_libdir to $LDFLAGS. ++ dnl But don't add it ++ dnl 1. if it's the standard /usr/lib, ++ dnl 2. if it's already present in $LDFLAGS, ++ dnl 3. if it's /usr/local/lib and we are using GCC on Linux, ++ dnl 4. if it doesn't exist as a directory. ++ if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then ++ haveit= ++ for x in $LDFLAGS; do ++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) ++ if test "X$x" = "X-L$additional_libdir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then ++ if test -n "$GCC"; then ++ case $host_os in ++ linux*) haveit=yes;; ++ esac ++ fi ++ fi ++ if test -z "$haveit"; then ++ if test -d "$additional_libdir"; then ++ dnl Really add $additional_libdir to $LDFLAGS. ++ LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" ++ fi ++ fi ++ fi ++ fi ++ fi ++]) ++ ++dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, ++dnl acl_final_exec_prefix, containing the values to which $prefix and ++dnl $exec_prefix will expand at the end of the configure script. ++AC_DEFUN([AC_LIB_PREPARE_PREFIX], ++[ ++ dnl Unfortunately, prefix and exec_prefix get only finally determined ++ dnl at the end of configure. ++ if test "X$prefix" = "XNONE"; then ++ acl_final_prefix="$ac_default_prefix" ++ else ++ acl_final_prefix="$prefix" ++ fi ++ if test "X$exec_prefix" = "XNONE"; then ++ acl_final_exec_prefix='${prefix}' ++ else ++ acl_final_exec_prefix="$exec_prefix" ++ fi ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" ++ prefix="$acl_save_prefix" ++]) ++ ++dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the ++dnl variables prefix and exec_prefix bound to the values they will have ++dnl at the end of the configure script. ++AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], ++[ ++ acl_save_prefix="$prefix" ++ prefix="$acl_final_prefix" ++ acl_save_exec_prefix="$exec_prefix" ++ exec_prefix="$acl_final_exec_prefix" ++ $1 ++ exec_prefix="$acl_save_exec_prefix" ++ prefix="$acl_save_prefix" ++]) ++ ++dnl AC_LIB_PREPARE_MULTILIB creates ++dnl - a variable acl_libdirstem, containing the basename of the libdir, either ++dnl "lib" or "lib64" or "lib/64", ++dnl - a variable acl_libdirstem2, as a secondary possible value for ++dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or ++dnl "lib/amd64". ++AC_DEFUN([AC_LIB_PREPARE_MULTILIB], ++[ ++ dnl There is no formal standard regarding lib and lib64. ++ dnl On glibc systems, the current practice is that on a system supporting ++ dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under ++ dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine ++ dnl the compiler's default mode by looking at the compiler's library search ++ dnl path. If at least one of its elements ends in /lib64 or points to a ++ dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI. ++ dnl Otherwise we use the default, namely "lib". ++ dnl On Solaris systems, the current practice is that on a system supporting ++ dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under ++ dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or ++ dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib. ++ AC_REQUIRE([AC_CANONICAL_HOST]) ++ AC_REQUIRE([gl_HOST_CPU_C_ABI_32BIT]) ++ ++ case "$host_os" in ++ solaris*) ++ AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit], ++ [AC_COMPILE_IFELSE( ++ [AC_LANG_SOURCE( ++ [[#ifdef _LP64 ++ int ok; ++ #else ++ error fail ++ #endif ++ ]])], ++ [gl_cv_solaris_64bit=yes], ++ [gl_cv_solaris_64bit=no]) ++ ]);; ++ esac ++ ++ dnl Allow the user to override the result by setting acl_cv_libdirstems. ++ AC_CACHE_CHECK([for the common suffixes of directories in the library search path], ++ [acl_cv_libdirstems], ++ [acl_libdirstem=lib ++ acl_libdirstem2= ++ case "$host_os" in ++ solaris*) ++ dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment ++ dnl <https://docs.oracle.com/cd/E19253-01/816-5138/dev-env/index.html>. ++ dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link." ++ dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the ++ dnl symlink is missing, so we set acl_libdirstem2 too. ++ if test $gl_cv_solaris_64bit = yes; then ++ acl_libdirstem=lib/64 ++ case "$host_cpu" in ++ sparc*) acl_libdirstem2=lib/sparcv9 ;; ++ i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; ++ esac ++ fi ++ ;; ++ *) ++ dnl If $CC generates code for a 32-bit ABI, the libraries are ++ dnl surely under $prefix/lib, not $prefix/lib64. ++ if test "$HOST_CPU_C_ABI_32BIT" != yes; then ++ dnl The result is a property of the system. However, non-system ++ dnl compilers sometimes have odd library search paths. Therefore ++ dnl prefer asking /usr/bin/gcc, if available, rather than $CC. ++ searchpath=`(if test -f /usr/bin/gcc \ ++ && LC_ALL=C /usr/bin/gcc -print-search-dirs >/dev/null 2>/dev/null; then \ ++ LC_ALL=C /usr/bin/gcc -print-search-dirs; \ ++ else \ ++ LC_ALL=C $CC -print-search-dirs; \ ++ fi) 2>/dev/null \ ++ | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` ++ if test -n "$searchpath"; then ++ acl_save_IFS="${IFS= }"; IFS=":" ++ for searchdir in $searchpath; do ++ if test -d "$searchdir"; then ++ case "$searchdir" in ++ */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; ++ */../ | */.. ) ++ # Better ignore directories of this form. They are misleading. ++ ;; ++ *) searchdir=`cd "$searchdir" && pwd` ++ case "$searchdir" in ++ */lib64 ) acl_libdirstem=lib64 ;; ++ esac ;; ++ esac ++ fi ++ done ++ IFS="$acl_save_IFS" ++ fi ++ fi ++ ;; ++ esac ++ test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" ++ acl_cv_libdirstems="$acl_libdirstem,$acl_libdirstem2" ++ ]) ++ # Decompose acl_cv_libdirstems into acl_libdirstem and acl_libdirstem2. ++ acl_libdirstem=`echo "$acl_cv_libdirstems" | sed -e 's/,.*//'` ++ acl_libdirstem2=`echo "$acl_cv_libdirstems" | sed -e '/,/s/.*,//'` ++]) +diff -uprN clean/lrzsz-0.12.20/m4/nls.m4 lrzsz-0.12.20/m4/nls.m4 +--- clean/lrzsz-0.12.20/m4/nls.m4 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/m4/nls.m4 2019-11-25 18:21:18.000000000 +0000 +@@ -0,0 +1,32 @@ ++# nls.m4 serial 5 (gettext-0.18) ++dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014, 2016, 2019 Free Software ++dnl Foundation, Inc. ++dnl This file is free software; the Free Software Foundation ++dnl gives unlimited permission to copy and/or distribute it, ++dnl with or without modifications, as long as this notice is preserved. ++dnl ++dnl This file can be used in projects which are not available under ++dnl the GNU General Public License or the GNU Library General Public ++dnl License but which still want to provide support for the GNU gettext ++dnl functionality. ++dnl Please note that the actual code of the GNU gettext library is covered ++dnl by the GNU Library General Public License, and the rest of the GNU ++dnl gettext package is covered by the GNU General Public License. ++dnl They are *not* in the public domain. ++ ++dnl Authors: ++dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000. ++dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003. ++ ++AC_PREREQ([2.50]) ++ ++AC_DEFUN([AM_NLS], ++[ ++ AC_MSG_CHECKING([whether NLS is requested]) ++ dnl Default is enabled NLS ++ AC_ARG_ENABLE([nls], ++ [ --disable-nls do not use Native Language Support], ++ USE_NLS=$enableval, USE_NLS=yes) ++ AC_MSG_RESULT([$USE_NLS]) ++ AC_SUBST([USE_NLS]) ++]) +diff -uprN clean/lrzsz-0.12.20/m4/po.m4 lrzsz-0.12.20/m4/po.m4 +--- clean/lrzsz-0.12.20/m4/po.m4 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/m4/po.m4 2019-11-25 18:21:18.000000000 +0000 +@@ -0,0 +1,450 @@ ++# po.m4 serial 30 (gettext-0.20) ++dnl Copyright (C) 1995-2014, 2016, 2018-2019 Free Software Foundation, Inc. ++dnl This file is free software; the Free Software Foundation ++dnl gives unlimited permission to copy and/or distribute it, ++dnl with or without modifications, as long as this notice is preserved. ++dnl ++dnl This file can be used in projects which are not available under ++dnl the GNU General Public License or the GNU Library General Public ++dnl License but which still want to provide support for the GNU gettext ++dnl functionality. ++dnl Please note that the actual code of the GNU gettext library is covered ++dnl by the GNU Library General Public License, and the rest of the GNU ++dnl gettext package is covered by the GNU General Public License. ++dnl They are *not* in the public domain. ++ ++dnl Authors: ++dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000. ++dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003. ++ ++AC_PREREQ([2.60]) ++ ++dnl Checks for all prerequisites of the po subdirectory. ++AC_DEFUN([AM_PO_SUBDIRS], ++[ ++ AC_REQUIRE([AC_PROG_MAKE_SET])dnl ++ AC_REQUIRE([AC_PROG_INSTALL])dnl ++ AC_REQUIRE([AC_PROG_MKDIR_P])dnl ++ AC_REQUIRE([AC_PROG_SED])dnl ++ AC_REQUIRE([AM_NLS])dnl ++ ++ dnl Release version of the gettext macros. This is used to ensure that ++ dnl the gettext macros and po/Makefile.in.in are in sync. ++ AC_SUBST([GETTEXT_MACRO_VERSION], [0.20]) ++ ++ dnl Perform the following tests also if --disable-nls has been given, ++ dnl because they are needed for "make dist" to work. ++ ++ dnl Search for GNU msgfmt in the PATH. ++ dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. ++ dnl The second test excludes FreeBSD msgfmt. ++ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, ++ [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && ++ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], ++ :) ++ AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT]) ++ ++ dnl Test whether it is GNU msgfmt >= 0.15. ++changequote(,)dnl ++ case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in ++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; ++ *) GMSGFMT_015=$GMSGFMT ;; ++ esac ++changequote([,])dnl ++ AC_SUBST([GMSGFMT_015]) ++ ++ dnl Search for GNU xgettext 0.12 or newer in the PATH. ++ dnl The first test excludes Solaris xgettext and early GNU xgettext versions. ++ dnl The second test excludes FreeBSD xgettext. ++ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, ++ [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && ++ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], ++ :) ++ dnl Remove leftover from FreeBSD xgettext call. ++ rm -f messages.po ++ ++ dnl Test whether it is GNU xgettext >= 0.15. ++changequote(,)dnl ++ case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in ++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; ++ *) XGETTEXT_015=$XGETTEXT ;; ++ esac ++changequote([,])dnl ++ AC_SUBST([XGETTEXT_015]) ++ ++ dnl Search for GNU msgmerge 0.11 or newer in the PATH. ++ AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, ++ [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :) ++ ++ dnl Test whether it is GNU msgmerge >= 0.20. ++ if LC_ALL=C $MSGMERGE --help | grep ' --for-msgfmt ' >/dev/null; then ++ MSGMERGE_FOR_MSGFMT_OPTION='--for-msgfmt' ++ else ++ dnl Test whether it is GNU msgmerge >= 0.12. ++ if LC_ALL=C $MSGMERGE --help | grep ' --no-fuzzy-matching ' >/dev/null; then ++ MSGMERGE_FOR_MSGFMT_OPTION='--no-fuzzy-matching --no-location --quiet' ++ else ++ dnl With these old versions, $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) is ++ dnl slow. But this is not a big problem, as such old gettext versions are ++ dnl hardly in use any more. ++ MSGMERGE_FOR_MSGFMT_OPTION='--no-location --quiet' ++ fi ++ fi ++ AC_SUBST([MSGMERGE_FOR_MSGFMT_OPTION]) ++ ++ dnl Support for AM_XGETTEXT_OPTION. ++ test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= ++ AC_SUBST([XGETTEXT_EXTRA_OPTIONS]) ++ ++ AC_CONFIG_COMMANDS([po-directories], [[ ++ for ac_file in $CONFIG_FILES; do ++ # Support "outfile[:infile[:infile...]]" ++ case "$ac_file" in ++ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; ++ esac ++ # PO directories have a Makefile.in generated from Makefile.in.in. ++ case "$ac_file" in */Makefile.in) ++ # Adjust a relative srcdir. ++ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` ++ ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` ++ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` ++ # In autoconf-2.13 it is called $ac_given_srcdir. ++ # In autoconf-2.50 it is called $srcdir. ++ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" ++ case "$ac_given_srcdir" in ++ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; ++ /*) top_srcdir="$ac_given_srcdir" ;; ++ *) top_srcdir="$ac_dots$ac_given_srcdir" ;; ++ esac ++ # Treat a directory as a PO directory if and only if it has a ++ # POTFILES.in file. This allows packages to have multiple PO ++ # directories under different names or in different locations. ++ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then ++ rm -f "$ac_dir/POTFILES" ++ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" ++ gt_tab=`printf '\t'` ++ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" ++ POMAKEFILEDEPS="POTFILES.in" ++ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend ++ # on $ac_dir but don't depend on user-specified configuration ++ # parameters. ++ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then ++ # The LINGUAS file contains the set of available languages. ++ if test -n "$OBSOLETE_ALL_LINGUAS"; then ++ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" ++ fi ++ ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` ++ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" ++ else ++ # The set of available languages was given in configure.in. ++ ALL_LINGUAS=$OBSOLETE_ALL_LINGUAS ++ fi ++ # Compute POFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) ++ # Compute UPDATEPOFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) ++ # Compute DUMMYPOFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) ++ # Compute GMOFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) ++ case "$ac_given_srcdir" in ++ .) srcdirpre= ;; ++ *) srcdirpre='$(srcdir)/' ;; ++ esac ++ POFILES= ++ UPDATEPOFILES= ++ DUMMYPOFILES= ++ GMOFILES= ++ for lang in $ALL_LINGUAS; do ++ POFILES="$POFILES $srcdirpre$lang.po" ++ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" ++ DUMMYPOFILES="$DUMMYPOFILES $lang.nop" ++ GMOFILES="$GMOFILES $srcdirpre$lang.gmo" ++ done ++ # CATALOGS depends on both $ac_dir and the user's LINGUAS ++ # environment variable. ++ INST_LINGUAS= ++ if test -n "$ALL_LINGUAS"; then ++ for presentlang in $ALL_LINGUAS; do ++ useit=no ++ if test "%UNSET%" != "$LINGUAS"; then ++ desiredlanguages="$LINGUAS" ++ else ++ desiredlanguages="$ALL_LINGUAS" ++ fi ++ for desiredlang in $desiredlanguages; do ++ # Use the presentlang catalog if desiredlang is ++ # a. equal to presentlang, or ++ # b. a variant of presentlang (because in this case, ++ # presentlang can be used as a fallback for messages ++ # which are not translated in the desiredlang catalog). ++ case "$desiredlang" in ++ "$presentlang"*) useit=yes;; ++ esac ++ done ++ if test $useit = yes; then ++ INST_LINGUAS="$INST_LINGUAS $presentlang" ++ fi ++ done ++ fi ++ CATALOGS= ++ if test -n "$INST_LINGUAS"; then ++ for lang in $INST_LINGUAS; do ++ CATALOGS="$CATALOGS $lang.gmo" ++ done ++ fi ++ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" ++ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" ++ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do ++ if test -f "$f"; then ++ case "$f" in ++ *.orig | *.bak | *~) ;; ++ *) cat "$f" >> "$ac_dir/Makefile" ;; ++ esac ++ fi ++ done ++ fi ++ ;; ++ esac ++ done]], ++ [# Capture the value of obsolete ALL_LINGUAS because we need it to compute ++ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. ++ OBSOLETE_ALL_LINGUAS="$ALL_LINGUAS" ++ # Capture the value of LINGUAS because we need it to compute CATALOGS. ++ LINGUAS="${LINGUAS-%UNSET%}" ++ ]) ++]) ++ ++dnl Postprocesses a Makefile in a directory containing PO files. ++AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE], ++[ ++ # When this code is run, in config.status, two variables have already been ++ # set: ++ # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in, ++ # - LINGUAS is the value of the environment variable LINGUAS at configure ++ # time. ++ ++changequote(,)dnl ++ # Adjust a relative srcdir. ++ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` ++ ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` ++ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` ++ # In autoconf-2.13 it is called $ac_given_srcdir. ++ # In autoconf-2.50 it is called $srcdir. ++ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" ++ case "$ac_given_srcdir" in ++ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; ++ /*) top_srcdir="$ac_given_srcdir" ;; ++ *) top_srcdir="$ac_dots$ac_given_srcdir" ;; ++ esac ++ ++ # Find a way to echo strings without interpreting backslash. ++ if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then ++ gt_echo='echo' ++ else ++ if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then ++ gt_echo='printf %s\n' ++ else ++ echo_func () { ++ cat <<EOT ++$* ++EOT ++ } ++ gt_echo='echo_func' ++ fi ++ fi ++ ++ # A sed script that extracts the value of VARIABLE from a Makefile. ++ tab=`printf '\t'` ++ sed_x_variable=' ++# Test if the hold space is empty. ++x ++s/P/P/ ++x ++ta ++# Yes it was empty. Look if we have the expected variable definition. ++/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=/{ ++ # Seen the first line of the variable definition. ++ s/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=// ++ ba ++} ++bd ++:a ++# Here we are processing a line from the variable definition. ++# Remove comment, more precisely replace it with a space. ++s/#.*$/ / ++# See if the line ends in a backslash. ++tb ++:b ++s/\\$// ++# Print the line, without the trailing backslash. ++p ++tc ++# There was no trailing backslash. The end of the variable definition is ++# reached. Clear the hold space. ++s/^.*$// ++x ++bd ++:c ++# A trailing backslash means that the variable definition continues in the ++# next line. Put a nonempty string into the hold space to indicate this. ++s/^.*$/P/ ++x ++:d ++' ++changequote([,])dnl ++ ++ # Set POTFILES to the value of the Makefile variable POTFILES. ++ sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'` ++ POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"` ++ # Compute POTFILES_DEPS as ++ # $(foreach file, $(POTFILES), $(top_srcdir)/$(file)) ++ POTFILES_DEPS= ++ for file in $POTFILES; do ++ POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file" ++ done ++ POMAKEFILEDEPS="" ++ ++ if test -n "$OBSOLETE_ALL_LINGUAS"; then ++ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" ++ fi ++ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then ++ # The LINGUAS file contains the set of available languages. ++ ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` ++ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" ++ else ++ # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS. ++ sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'` ++ ALL_LINGUAS=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"` ++ fi ++ # Compute POFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) ++ # Compute UPDATEPOFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) ++ # Compute DUMMYPOFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) ++ # Compute GMOFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) ++ # Compute PROPERTIESFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(DOMAIN)_$(lang).properties) ++ # Compute CLASSFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(DOMAIN)_$(lang).class) ++ # Compute QMFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm) ++ # Compute MSGFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg) ++ # Compute RESOURCESDLLFILES ++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll) ++ case "$ac_given_srcdir" in ++ .) srcdirpre= ;; ++ *) srcdirpre='$(srcdir)/' ;; ++ esac ++ POFILES= ++ UPDATEPOFILES= ++ DUMMYPOFILES= ++ GMOFILES= ++ PROPERTIESFILES= ++ CLASSFILES= ++ QMFILES= ++ MSGFILES= ++ RESOURCESDLLFILES= ++ for lang in $ALL_LINGUAS; do ++ POFILES="$POFILES $srcdirpre$lang.po" ++ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" ++ DUMMYPOFILES="$DUMMYPOFILES $lang.nop" ++ GMOFILES="$GMOFILES $srcdirpre$lang.gmo" ++ PROPERTIESFILES="$PROPERTIESFILES \$(srcdir)/\$(DOMAIN)_$lang.properties" ++ CLASSFILES="$CLASSFILES \$(srcdir)/\$(DOMAIN)_$lang.class" ++ QMFILES="$QMFILES $srcdirpre$lang.qm" ++ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'` ++ MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg" ++ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'` ++ RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll" ++ done ++ # CATALOGS depends on both $ac_dir and the user's LINGUAS ++ # environment variable. ++ INST_LINGUAS= ++ if test -n "$ALL_LINGUAS"; then ++ for presentlang in $ALL_LINGUAS; do ++ useit=no ++ if test "%UNSET%" != "$LINGUAS"; then ++ desiredlanguages="$LINGUAS" ++ else ++ desiredlanguages="$ALL_LINGUAS" ++ fi ++ for desiredlang in $desiredlanguages; do ++ # Use the presentlang catalog if desiredlang is ++ # a. equal to presentlang, or ++ # b. a variant of presentlang (because in this case, ++ # presentlang can be used as a fallback for messages ++ # which are not translated in the desiredlang catalog). ++ case "$desiredlang" in ++ "$presentlang"*) useit=yes;; ++ esac ++ done ++ if test $useit = yes; then ++ INST_LINGUAS="$INST_LINGUAS $presentlang" ++ fi ++ done ++ fi ++ CATALOGS= ++ JAVACATALOGS= ++ QTCATALOGS= ++ TCLCATALOGS= ++ CSHARPCATALOGS= ++ if test -n "$INST_LINGUAS"; then ++ for lang in $INST_LINGUAS; do ++ CATALOGS="$CATALOGS $lang.gmo" ++ JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties" ++ QTCATALOGS="$QTCATALOGS $lang.qm" ++ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'` ++ TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg" ++ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'` ++ CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll" ++ done ++ fi ++ ++ sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp" ++ tab=`printf '\t'` ++ if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then ++ # Add dependencies that cannot be formulated as a simple suffix rule. ++ for lang in $ALL_LINGUAS; do ++ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'` ++ cat >> "$ac_file.tmp" <<EOF ++$frobbedlang.msg: $lang.po ++${tab}@echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \ ++${tab}\$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; } ++EOF ++ done ++ fi ++ if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then ++ # Add dependencies that cannot be formulated as a simple suffix rule. ++ for lang in $ALL_LINGUAS; do ++ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'` ++ cat >> "$ac_file.tmp" <<EOF ++$frobbedlang/\$(DOMAIN).resources.dll: $lang.po ++${tab}@echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \ ++${tab}\$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; } ++EOF ++ done ++ fi ++ if test -n "$POMAKEFILEDEPS"; then ++ cat >> "$ac_file.tmp" <<EOF ++Makefile: $POMAKEFILEDEPS ++EOF ++ fi ++ mv "$ac_file.tmp" "$ac_file" ++]) ++ ++dnl Initializes the accumulator used by AM_XGETTEXT_OPTION. ++AC_DEFUN([AM_XGETTEXT_OPTION_INIT], ++[ ++ XGETTEXT_EXTRA_OPTIONS= ++]) ++ ++dnl Registers an option to be passed to xgettext in the po subdirectory. ++AC_DEFUN([AM_XGETTEXT_OPTION], ++[ ++ AC_REQUIRE([AM_XGETTEXT_OPTION_INIT]) ++ XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1" ++]) +diff -uprN clean/lrzsz-0.12.20/m4/progtest.m4 lrzsz-0.12.20/m4/progtest.m4 +--- clean/lrzsz-0.12.20/m4/progtest.m4 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/m4/progtest.m4 2019-11-25 18:21:18.000000000 +0000 +@@ -0,0 +1,91 @@ ++# progtest.m4 serial 7 (gettext-0.18.2) ++dnl Copyright (C) 1996-2003, 2005, 2008-2019 Free Software Foundation, Inc. ++dnl This file is free software; the Free Software Foundation ++dnl gives unlimited permission to copy and/or distribute it, ++dnl with or without modifications, as long as this notice is preserved. ++dnl ++dnl This file can be used in projects which are not available under ++dnl the GNU General Public License or the GNU Library General Public ++dnl License but which still want to provide support for the GNU gettext ++dnl functionality. ++dnl Please note that the actual code of the GNU gettext library is covered ++dnl by the GNU Library General Public License, and the rest of the GNU ++dnl gettext package is covered by the GNU General Public License. ++dnl They are *not* in the public domain. ++ ++dnl Authors: ++dnl Ulrich Drepper <drepper@cygnus.com>, 1996. ++ ++AC_PREREQ([2.50]) ++ ++# Search path for a program which passes the given test. ++ ++dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, ++dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) ++AC_DEFUN([AM_PATH_PROG_WITH_TEST], ++[ ++# Prepare PATH_SEPARATOR. ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which ++ # contains only /bin. Note that ksh looks also at the FPATH variable, ++ # so we have to set that as well for the test. ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ ++ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ ++ || PATH_SEPARATOR=';' ++ } ++fi ++ ++# Find out how to test for executable files. Don't use a zero-byte file, ++# as systems may use methods other than mode bits to determine executability. ++cat >conf$$.file <<_ASEOF ++#! /bin/sh ++exit 0 ++_ASEOF ++chmod +x conf$$.file ++if test -x conf$$.file >/dev/null 2>&1; then ++ ac_executable_p="test -x" ++else ++ ac_executable_p="test -f" ++fi ++rm -f conf$$.file ++ ++# Extract the first word of "$2", so it can be a program name with args. ++set dummy $2; ac_word=[$]2 ++AC_MSG_CHECKING([for $ac_word]) ++AC_CACHE_VAL([ac_cv_path_$1], ++[case "[$]$1" in ++ [[\\/]]* | ?:[[\\/]]*) ++ ac_cv_path_$1="[$]$1" # Let the user override the test with a path. ++ ;; ++ *) ++ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in ifelse([$5], , $PATH, [$5]); do ++ IFS="$ac_save_IFS" ++ test -z "$ac_dir" && ac_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then ++ echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD ++ if [$3]; then ++ ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" ++ break 2 ++ fi ++ fi ++ done ++ done ++ IFS="$ac_save_IFS" ++dnl If no 4th arg is given, leave the cache variable unset, ++dnl so AC_PATH_PROGS will keep looking. ++ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" ++])dnl ++ ;; ++esac])dnl ++$1="$ac_cv_path_$1" ++if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then ++ AC_MSG_RESULT([$][$1]) ++else ++ AC_MSG_RESULT([no]) ++fi ++AC_SUBST([$1])dnl ++]) +diff -uprN clean/lrzsz-0.12.20/Makefile.am lrzsz-0.12.20/Makefile.am +--- clean/lrzsz-0.12.20/Makefile.am 1998-12-30 11:19:40.000000000 +0000 ++++ lrzsz-0.12.20/Makefile.am 2019-11-26 11:47:29.000000000 +0000 +@@ -1,5 +1,5 @@ +-SUBDIRS = lib intl src po man testsuite +-EXTRA_DIST = check.lrzsz COMPATABILITY README.cvs README.isdn4linux \ ++SUBDIRS = lib src po man testsuite ++EXTRA_DIST = config.rpath m4/ChangeLog check.lrzsz COMPATABILITY README.cvs README.isdn4linux \ + README.gettext rpmrc buildrpm systype.in fastcheck.sh README.tests \ + beos-runpiped.c fastcheck.beos + noinst_SCRIPTS=systype +@@ -7,7 +7,6 @@ PR=@PACKAGE@-@VERSION@ + CLEAN_FILES=fastcheck.done + + dist-hook: +- mkdir $(distdir)/debian + cp -fa $(srcdir)/debian/changelog $(distdir)/debian/ + cp -fa $(srcdir)/debian/control $(distdir)/debian/ + cp -fa $(srcdir)/debian/copyright $(distdir)/debian/ +@@ -83,3 +82,5 @@ cvs-dist: + rpm: $(PR).tar.gz Specfile + $(srcdir)/buildrpm $(srcdir) + ++ ++ACLOCAL_AMFLAGS = -I m4 +diff -uprN clean/lrzsz-0.12.20/Makefile.in lrzsz-0.12.20/Makefile.in +--- clean/lrzsz-0.12.20/Makefile.in 1998-12-30 16:31:40.000000000 +0000 ++++ lrzsz-0.12.20/Makefile.in 2019-11-26 11:47:49.000000000 +0000 +@@ -1,6 +1,8 @@ +-# Makefile.in generated automatically by automake 1.3 from Makefile.am ++# Makefile.in generated by automake 1.16.1 from Makefile.am. ++# @configure_input@ ++ ++# Copyright (C) 1994-2018 Free Software Foundation, Inc. + +-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -10,345 +12,817 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + ++@SET_MAKE@ + +-SHELL = /bin/sh +- +-srcdir = @srcdir@ +-top_srcdir = @top_srcdir@ + VPATH = @srcdir@ +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +- +-bindir = @bindir@ +-sbindir = @sbindir@ +-libexecdir = @libexecdir@ +-datadir = @datadir@ +-sysconfdir = @sysconfdir@ +-sharedstatedir = @sharedstatedir@ +-localstatedir = @localstatedir@ +-libdir = @libdir@ +-infodir = @infodir@ +-mandir = @mandir@ +-includedir = @includedir@ +-oldincludedir = /usr/include +- +-DISTDIR = +- ++am__is_gnu_make = { \ ++ if test -z '$(MAKELEVEL)'; then \ ++ false; \ ++ elif test -n '$(MAKE_HOST)'; then \ ++ true; \ ++ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ ++ true; \ ++ else \ ++ false; \ ++ fi; \ ++} ++am__make_running_with_option = \ ++ case $${target_option-} in \ ++ ?) ;; \ ++ *) echo "am__make_running_with_option: internal error: invalid" \ ++ "target option '$${target_option-}' specified" >&2; \ ++ exit 1;; \ ++ esac; \ ++ has_opt=no; \ ++ sane_makeflags=$$MAKEFLAGS; \ ++ if $(am__is_gnu_make); then \ ++ sane_makeflags=$$MFLAGS; \ ++ else \ ++ case $$MAKEFLAGS in \ ++ *\\[\ \ ]*) \ ++ bs=\\; \ ++ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ ++ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ ++ esac; \ ++ fi; \ ++ skip_next=no; \ ++ strip_trailopt () \ ++ { \ ++ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ ++ }; \ ++ for flg in $$sane_makeflags; do \ ++ test $$skip_next = yes && { skip_next=no; continue; }; \ ++ case $$flg in \ ++ *=*|--*) continue;; \ ++ -*I) strip_trailopt 'I'; skip_next=yes;; \ ++ -*I?*) strip_trailopt 'I';; \ ++ -*O) strip_trailopt 'O'; skip_next=yes;; \ ++ -*O?*) strip_trailopt 'O';; \ ++ -*l) strip_trailopt 'l'; skip_next=yes;; \ ++ -*l?*) strip_trailopt 'l';; \ ++ -[dEDm]) skip_next=yes;; \ ++ -[JT]) skip_next=yes;; \ ++ esac; \ ++ case $$flg in \ ++ *$$target_option*) has_opt=yes; break;; \ ++ esac; \ ++ done; \ ++ test $$has_opt = yes ++am__make_dryrun = (target_option=n; $(am__make_running_with_option)) ++am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) + pkgdatadir = $(datadir)/@PACKAGE@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +- +-top_builddir = . +- +-ACLOCAL = @ACLOCAL@ +-AUTOCONF = @AUTOCONF@ +-AUTOMAKE = @AUTOMAKE@ +-AUTOHEADER = @AUTOHEADER@ +- +-INSTALL = @INSTALL@ +-INSTALL_PROGRAM = @INSTALL_PROGRAM@ +-INSTALL_DATA = @INSTALL_DATA@ +-INSTALL_SCRIPT = @INSTALL_SCRIPT@ +-transform = @program_transform_name@ +- ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : +-CATALOGS = @CATALOGS@ +-CATOBJEXT = @CATOBJEXT@ ++build_triplet = @build@ ++host_triplet = @host@ ++subdir = . ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ ++ $(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \ ++ $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ ++ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ ++ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ ++ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \ ++ $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ ++ $(am__configure_deps) $(am__DIST_COMMON) ++am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ ++ configure.lineno config.status.lineno ++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ++CONFIG_HEADER = config.h ++CONFIG_CLEAN_FILES = debian/rules Specfile systype ++CONFIG_CLEAN_VPATH_FILES = ++SCRIPTS = $(noinst_SCRIPTS) ++AM_V_P = $(am__v_P_@AM_V@) ++am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) ++am__v_P_0 = false ++am__v_P_1 = : ++AM_V_GEN = $(am__v_GEN_@AM_V@) ++am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) ++am__v_GEN_0 = @echo " GEN " $@; ++am__v_GEN_1 = ++AM_V_at = $(am__v_at_@AM_V@) ++am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) ++am__v_at_0 = @ ++am__v_at_1 = ++SOURCES = ++DIST_SOURCES = ++RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ++ ctags-recursive dvi-recursive html-recursive info-recursive \ ++ install-data-recursive install-dvi-recursive \ ++ install-exec-recursive install-html-recursive \ ++ install-info-recursive install-pdf-recursive \ ++ install-ps-recursive install-recursive installcheck-recursive \ ++ installdirs-recursive pdf-recursive ps-recursive \ ++ tags-recursive uninstall-recursive ++am__can_run_installinfo = \ ++ case $$AM_UPDATE_INFO_DIR in \ ++ n|no|NO) false;; \ ++ *) (install-info --version) >/dev/null 2>&1;; \ ++ esac ++RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ ++ distclean-recursive maintainer-clean-recursive ++am__recursive_targets = \ ++ $(RECURSIVE_TARGETS) \ ++ $(RECURSIVE_CLEAN_TARGETS) \ ++ $(am__extra_recursive_targets) ++AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ ++ cscope distdir distdir-am dist dist-all distcheck ++am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ ++ $(LISP)config.h.in ++# Read a list of newline-separated strings from the standard input, ++# and print each of them once, without duplicates. Input order is ++# *not* preserved. ++am__uniquify_input = $(AWK) '\ ++ BEGIN { nonempty = 0; } \ ++ { items[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in items) print i; }; } \ ++' ++# Make sure the list of sources is unique. This is necessary because, ++# e.g., the same source file might be shared among _SOURCES variables ++# for different programs/libraries. ++am__define_uniq_tagged_files = \ ++ list='$(am__tagged_files)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | $(am__uniquify_input)` ++ETAGS = etags ++CTAGS = ctags ++CSCOPE = cscope ++DIST_SUBDIRS = $(SUBDIRS) ++am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Specfile.in \ ++ $(srcdir)/config.h.in $(srcdir)/systype.in \ ++ $(top_srcdir)/debian/rules.in ABOUT-NLS AUTHORS COPYING \ ++ ChangeLog INSTALL NEWS README THANKS TODO acconfig.h compile \ ++ config.guess config.rpath config.sub depcomp install-sh \ ++ missing mkinstalldirs ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++distdir = $(PACKAGE)-$(VERSION) ++top_distdir = $(distdir) ++am__remove_distdir = \ ++ if test -d "$(distdir)"; then \ ++ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ ++ && rm -rf "$(distdir)" \ ++ || { sleep 5 && rm -rf "$(distdir)"; }; \ ++ else :; fi ++am__post_remove_distdir = $(am__remove_distdir) ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" ++DIST_ARCHIVES = $(distdir).tar.gz ++GZIP_ENV = --best ++DIST_TARGETS = dist-gzip ++distuninstallcheck_listfiles = find . -type f -print ++am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ ++ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' ++distcleancheck_listfiles = find . -type f -print ++ACLOCAL = @ACLOCAL@ ++ALLOCA = @ALLOCA@ ++AMTAR = @AMTAR@ ++AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ + CC = @CC@ ++CCDEPMODE = @CCDEPMODE@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ +-DATADIRNAME = @DATADIRNAME@ ++CPPFLAGS = @CPPFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ ++EGREP = @EGREP@ + ENABLE_TIMESYNC = @ENABLE_TIMESYNC@ +-GENCAT = @GENCAT@ +-GMOFILES = @GMOFILES@ ++EXEEXT = @EXEEXT@ ++GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ + GMSGFMT = @GMSGFMT@ +-GT_NO = @GT_NO@ +-GT_YES = @GT_YES@ +-INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@ +-INSTOBJEXT = @INSTOBJEXT@ +-INTLDEPS = @INTLDEPS@ ++GMSGFMT_015 = @GMSGFMT_015@ ++GREP = @GREP@ ++INSTALL = @INSTALL@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INTLLIBS = @INTLLIBS@ +-INTLOBJS = @INTLOBJS@ ++INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ + LDFLAGS = @LDFLAGS@ ++LIBICONV = @LIBICONV@ ++LIBINTL = @LIBINTL@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ ++LTLIBICONV = @LTLIBICONV@ ++LTLIBINTL = @LTLIBINTL@ ++LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKINSTALLDIRS = @MKINSTALLDIRS@ ++MKDIR_P = @MKDIR_P@ + MSGFMT = @MSGFMT@ ++MSGMERGE = @MSGMERGE@ ++MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@ ++OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ +-POFILES = @POFILES@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ + POSUB = @POSUB@ + RANLIB = @RANLIB@ +-U = @U@ +-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ ++SED = @SED@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ ++STRIP = @STRIP@ + USE_NLS = @USE_NLS@ + VERSION = @VERSION@ +-l = @l@ +- +-SUBDIRS = lib intl src po man testsuite +-EXTRA_DIST = check.lrzsz COMPATABILITY README.cvs README.isdn4linux \ ++XGETTEXT = @XGETTEXT@ ++XGETTEXT_015 = @XGETTEXT_015@ ++XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ ++abs_builddir = @abs_builddir@ ++abs_srcdir = @abs_srcdir@ ++abs_top_builddir = @abs_top_builddir@ ++abs_top_srcdir = @abs_top_srcdir@ ++ac_ct_CC = @ac_ct_CC@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++builddir = @builddir@ ++datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++htmldir = @htmldir@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localedir = @localedir@ ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++psdir = @psdir@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++srcdir = @srcdir@ ++sysconfdir = @sysconfdir@ ++target_alias = @target_alias@ ++top_build_prefix = @top_build_prefix@ ++top_builddir = @top_builddir@ ++top_srcdir = @top_srcdir@ ++SUBDIRS = lib src po man testsuite ++EXTRA_DIST = config.rpath m4/ChangeLog check.lrzsz COMPATABILITY README.cvs README.isdn4linux \ + README.gettext rpmrc buildrpm systype.in fastcheck.sh README.tests \ + beos-runpiped.c fastcheck.beos +-noinst_SCRIPTS=systype +-PR=@PACKAGE@-@VERSION@ +-CLEAN_FILES=fastcheck.done +-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_HEADER = config.h +-CONFIG_CLEAN_FILES = Specfile systype +-SCRIPTS = $(noinst_SCRIPTS) +- +-DIST_COMMON = README ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL \ +-Makefile.am Makefile.in NEWS Specfile.in THANKS TODO acconfig.h \ +-acinclude.m4 aclocal.m4 config.guess config.h.in config.sub configure \ +-configure.in install-sh missing mkinstalldirs stamp-h.in systype.in + +- +-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) +- +-TAR = tar +-GZIP = --best +-all: all-recursive-am all-am ++noinst_SCRIPTS = systype ++PR = @PACKAGE@-@VERSION@ ++CLEAN_FILES = fastcheck.done ++ACLOCAL_AMFLAGS = -I m4 ++all: config.h ++ $(MAKE) $(AM_MAKEFLAGS) all-recursive + + .SUFFIXES: +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile +- +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +- cd $(top_builddir) \ +- && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status +- +-$(ACLOCAL_M4): configure.in acinclude.m4 +- cd $(srcdir) && $(ACLOCAL) +- +-config.status: $(srcdir)/configure +- $(SHELL) ./config.status --recheck +-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) +- cd $(srcdir) && $(AUTOCONF) +- +-config.h: stamp-h ++am--refresh: Makefile + @: +-stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status +- cd $(top_builddir) \ +- && CONFIG_FILES= CONFIG_HEADERS=config.h \ +- $(SHELL) ./config.status +- @echo timestamp > stamp-h +-$(srcdir)/config.h.in: $(srcdir)/stamp-h.in +-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h +- cd $(top_srcdir) && $(AUTOHEADER) +- @echo timestamp > $(srcdir)/stamp-h.in ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ ++ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ ++ && exit 0; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ echo ' $(SHELL) ./config.status'; \ ++ $(SHELL) ./config.status;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ ++ esac; + +-mostlyclean-hdr: ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ $(SHELL) ./config.status --recheck + +-clean-hdr: ++$(top_srcdir)/configure: $(am__configure_deps) ++ $(am__cd) $(srcdir) && $(AUTOCONF) ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) ++$(am__aclocal_m4_deps): ++ ++config.h: stamp-h1 ++ @test -f $@ || rm -f stamp-h1 ++ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 ++ ++stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status ++ @rm -f stamp-h1 ++ cd $(top_builddir) && $(SHELL) ./config.status config.h ++$(srcdir)/config.h.in: $(am__configure_deps) $(top_srcdir)/acconfig.h ++ ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) ++ rm -f stamp-h1 ++ touch $@ + + distclean-hdr: +- -rm -f config.h +- +-maintainer-clean-hdr: +-Specfile: $(top_builddir)/config.status Specfile.in +- cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= ./config.status +-systype: $(top_builddir)/config.status systype.in +- cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= ./config.status ++ -rm -f config.h stamp-h1 ++debian/rules: $(top_builddir)/config.status $(top_srcdir)/debian/rules.in ++ cd $(top_builddir) && $(SHELL) ./config.status $@ ++Specfile: $(top_builddir)/config.status $(srcdir)/Specfile.in ++ cd $(top_builddir) && $(SHELL) ./config.status $@ ++systype: $(top_builddir)/config.status $(srcdir)/systype.in ++ cd $(top_builddir) && $(SHELL) ./config.status $@ + + # This directory's subdirectories are mostly independent; you can cd +-# into them and run `make' without going through this Makefile. +-# To change the values of `make' variables: instead of editing Makefiles, +-# (1) if the variable is set in `config.status', edit `config.status' +-# (which will cause the Makefiles to be regenerated when you run `make'); +-# (2) otherwise, pass the desired values on the `make' command line. +- +-@SET_MAKE@ +- +-all-recursive install-data-recursive install-exec-recursive \ +-installdirs-recursive install-recursive uninstall-recursive \ +-check-recursive installcheck-recursive info-recursive dvi-recursive: +- @set fnord $(MAKEFLAGS); amf=$$2; \ +- list='$(SUBDIRS)'; for subdir in $$list; do \ +- target=`echo $@ | sed s/-recursive//`; \ ++# into them and run 'make' without going through this Makefile. ++# To change the values of 'make' variables: instead of editing Makefiles, ++# (1) if the variable is set in 'config.status', edit 'config.status' ++# (which will cause the Makefiles to be regenerated when you run 'make'); ++# (2) otherwise, pass the desired values on the 'make' command line. ++$(am__recursive_targets): ++ @fail=; \ ++ if $(am__make_keepgoing); then \ ++ failcom='fail=yes'; \ ++ else \ ++ failcom='exit 1'; \ ++ fi; \ ++ dot_seen=no; \ ++ target=`echo $@ | sed s/-recursive//`; \ ++ case "$@" in \ ++ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ ++ *) list='$(SUBDIRS)' ;; \ ++ esac; \ ++ for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ +- (cd $$subdir && $(MAKE) $$target) \ +- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ +- done && test -z "$$fail" +- +-mostlyclean-recursive clean-recursive distclean-recursive \ +-maintainer-clean-recursive: +- @set fnord $(MAKEFLAGS); amf=$$2; \ +- rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ +- rev="$$subdir $$rev"; \ ++ if test "$$subdir" = "."; then \ ++ dot_seen=yes; \ ++ local_target="$$target-am"; \ ++ else \ ++ local_target="$$target"; \ ++ fi; \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ || eval $$failcom; \ + done; \ +- for subdir in $$rev; do \ +- target=`echo $@ | sed s/-recursive//`; \ +- echo "Making $$target in $$subdir"; \ +- (cd $$subdir && $(MAKE) $$target) \ +- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ +- done && test -z "$$fail" +-tags-recursive: +- list='$(SUBDIRS)'; for subdir in $$list; do \ +- (cd $$subdir && $(MAKE) tags); \ +- done +- +-tags: TAGS ++ if test "$$dot_seen" = "no"; then \ ++ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ ++ fi; test -z "$$fail" ++ ++ID: $(am__tagged_files) ++ $(am__define_uniq_tagged_files); mkid -fID $$unique ++tags: tags-recursive ++TAGS: tags + +-ID: $(HEADERS) $(SOURCES) $(LISP) +- here=`pwd` && cd $(srcdir) \ +- && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP) +- +-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP) +- tags=; \ ++tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) ++ set x; \ + here=`pwd`; \ ++ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ ++ include_option=--etags-include; \ ++ empty_fix=.; \ ++ else \ ++ include_option=--include; \ ++ empty_fix=; \ ++ fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ ++ if test "$$subdir" = .; then :; else \ ++ test ! -f $$subdir/TAGS || \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ ++ fi; \ + done; \ +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ +- test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \ +- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS) +- +-mostlyclean-tags: +- +-clean-tags: ++ $(am__define_uniq_tagged_files); \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ ++ test -n "$$unique" || unique=$$empty_fix; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ ++ fi ++ctags: ctags-recursive ++ ++CTAGS: ctags ++ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) ++ $(am__define_uniq_tagged_files); \ ++ test -z "$(CTAGS_ARGS)$$unique" \ ++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ ++ $$unique ++ ++GTAGS: ++ here=`$(am__cd) $(top_builddir) && pwd` \ ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" ++cscope: cscope.files ++ test ! -s cscope.files \ ++ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) ++clean-cscope: ++ -rm -f cscope.files ++cscope.files: clean-cscope cscopelist ++cscopelist: cscopelist-recursive ++ ++cscopelist-am: $(am__tagged_files) ++ list='$(am__tagged_files)'; \ ++ case "$(srcdir)" in \ ++ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ ++ *) sdir=$(subdir)/$(srcdir) ;; \ ++ esac; \ ++ for i in $$list; do \ ++ if test -f "$$i"; then \ ++ echo "$(subdir)/$$i"; \ ++ else \ ++ echo "$$sdir/$$i"; \ ++ fi; \ ++ done >> $(top_builddir)/cscope.files + + distclean-tags: +- -rm -f TAGS ID ++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags ++ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files + +-maintainer-clean-tags: ++distdir: $(BUILT_SOURCES) ++ $(MAKE) $(AM_MAKEFLAGS) distdir-am + +-distdir = $(PACKAGE)-$(VERSION) +-top_distdir = $(distdir) ++distdir-am: $(DISTFILES) ++ $(am__remove_distdir) ++ test -d "$(distdir)" || mkdir "$(distdir)" ++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ list='$(DISTFILES)'; \ ++ dist_files=`for file in $$list; do echo $$file; done | \ ++ sed -e "s|^$$srcdirstrip/||;t" \ ++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ ++ case $$dist_files in \ ++ */*) $(MKDIR_P) `echo "$$dist_files" | \ ++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ ++ sort -u` ;; \ ++ esac; \ ++ for file in $$dist_files; do \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ if test -d $$d/$$file; then \ ++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ ++ else \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ ++ || exit 1; \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ $(am__make_dryrun) \ ++ || test -d "$(distdir)/$$subdir" \ ++ || $(MKDIR_P) "$(distdir)/$$subdir" \ ++ || exit 1; \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ ++ $(MAKE) $(AM_MAKEFLAGS) \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ ++ am__remove_distdir=: \ ++ am__skip_length_check=: \ ++ am__skip_mode_fix=: \ ++ distdir) \ ++ || exit 1; \ ++ fi; \ ++ done ++ $(MAKE) $(AM_MAKEFLAGS) \ ++ top_distdir="$(top_distdir)" distdir="$(distdir)" \ ++ dist-hook ++ -test -n "$(am__skip_mode_fix)" \ ++ || find "$(distdir)" -type d ! -perm -755 \ ++ -exec chmod u+rwx,go+rx {} \; -o \ ++ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ++ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ++ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ ++ || chmod -R a+r "$(distdir)" ++dist-gzip: distdir ++ tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz ++ $(am__post_remove_distdir) ++ ++dist-bzip2: distdir ++ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 ++ $(am__post_remove_distdir) ++ ++dist-lzip: distdir ++ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz ++ $(am__post_remove_distdir) ++ ++dist-xz: distdir ++ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz ++ $(am__post_remove_distdir) ++ ++dist-tarZ: distdir ++ @echo WARNING: "Support for distribution archives compressed with" \ ++ "legacy program 'compress' is deprecated." >&2 ++ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 ++ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z ++ $(am__post_remove_distdir) ++ ++dist-shar: distdir ++ @echo WARNING: "Support for shar distribution archives is" \ ++ "deprecated." >&2 ++ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 ++ shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz ++ $(am__post_remove_distdir) ++ ++dist-zip: distdir ++ -rm -f $(distdir).zip ++ zip -rq $(distdir).zip $(distdir) ++ $(am__post_remove_distdir) ++ ++dist dist-all: ++ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' ++ $(am__post_remove_distdir) + + # This target untars the dist file and tries a VPATH configuration. Then + # it guarantees that the distribution is self-contained by making another + # tarfile. + distcheck: dist +- -rm -rf $(distdir) +- GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz +- mkdir $(distdir)/=build +- mkdir $(distdir)/=inst +- dc_install_base=`cd $(distdir)/=inst && pwd`; \ +- cd $(distdir)/=build \ +- && ../configure --with-included-gettext --srcdir=.. --prefix=$$dc_install_base \ +- && $(MAKE) \ +- && $(MAKE) dvi \ +- && $(MAKE) check \ +- && $(MAKE) install \ +- && $(MAKE) installcheck \ +- && $(MAKE) dist +- -rm -rf $(distdir) +- @echo "========================"; \ +- echo "$(distdir).tar.gz is ready for distribution"; \ +- echo "========================" +-dist: distdir +- -chmod -R a+r $(distdir) +- GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir) +- -rm -rf $(distdir) +-dist-all: distdir +- -chmod -R a+r $(distdir) +- GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir) +- -rm -rf $(distdir) +-distdir: $(DISTFILES) +- -rm -rf $(distdir) +- mkdir $(distdir) +- -chmod 777 $(distdir) +- @for file in $(DISTFILES); do \ +- d=$(srcdir); \ +- test -f $(distdir)/$$file \ +- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ +- || cp -p $$d/$$file $(distdir)/$$file; \ +- done +- for subdir in $(SUBDIRS); do \ +- test -d $(distdir)/$$subdir \ +- || mkdir $(distdir)/$$subdir \ +- || exit 1; \ +- chmod 777 $(distdir)/$$subdir; \ +- (cd $$subdir && $(MAKE) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ +- || exit 1; \ +- done +- $(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook +-info: info-recursive +-dvi: dvi-recursive +-check: all-am +- $(MAKE) check-recursive +-installcheck: installcheck-recursive +-all-recursive-am: config.h +- $(MAKE) all-recursive +- ++ case '$(DIST_ARCHIVES)' in \ ++ *.tar.gz*) \ ++ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ ++ *.tar.bz2*) \ ++ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ ++ *.tar.lz*) \ ++ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ ++ *.tar.xz*) \ ++ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ ++ *.tar.Z*) \ ++ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ ++ *.shar.gz*) \ ++ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ ++ *.zip*) \ ++ unzip $(distdir).zip ;;\ ++ esac ++ chmod -R a-w $(distdir) ++ chmod u+w $(distdir) ++ mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst ++ chmod a-w $(distdir) ++ test -d $(distdir)/_build || exit 0; \ ++ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ ++ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ ++ && am__cwd=`pwd` \ ++ && $(am__cd) $(distdir)/_build/sub \ ++ && ../../configure \ ++ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ ++ $(DISTCHECK_CONFIGURE_FLAGS) \ ++ --srcdir=../.. --prefix="$$dc_install_base" \ ++ && $(MAKE) $(AM_MAKEFLAGS) \ ++ && $(MAKE) $(AM_MAKEFLAGS) dvi \ ++ && $(MAKE) $(AM_MAKEFLAGS) check \ ++ && $(MAKE) $(AM_MAKEFLAGS) install \ ++ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ ++ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ ++ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ ++ distuninstallcheck \ ++ && chmod -R a-w "$$dc_install_base" \ ++ && ({ \ ++ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ ++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ ++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ ++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ ++ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ ++ } || { rm -rf "$$dc_destdir"; exit 1; }) \ ++ && rm -rf "$$dc_destdir" \ ++ && $(MAKE) $(AM_MAKEFLAGS) dist \ ++ && rm -rf $(DIST_ARCHIVES) \ ++ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ ++ && cd "$$am__cwd" \ ++ || exit 1 ++ $(am__post_remove_distdir) ++ @(echo "$(distdir) archives ready for distribution: "; \ ++ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ ++ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' ++distuninstallcheck: ++ @test -n '$(distuninstallcheck_dir)' || { \ ++ echo 'ERROR: trying to run $@ with an empty' \ ++ '$$(distuninstallcheck_dir)' >&2; \ ++ exit 1; \ ++ }; \ ++ $(am__cd) '$(distuninstallcheck_dir)' || { \ ++ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ ++ exit 1; \ ++ }; \ ++ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ ++ || { echo "ERROR: files left after uninstall:" ; \ ++ if test -n "$(DESTDIR)"; then \ ++ echo " (check DESTDIR support)"; \ ++ fi ; \ ++ $(distuninstallcheck_listfiles) ; \ ++ exit 1; } >&2 ++distcleancheck: distclean ++ @if test '$(srcdir)' = . ; then \ ++ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ ++ exit 1 ; \ ++ fi ++ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ ++ || { echo "ERROR: files left in build directory after distclean:" ; \ ++ $(distcleancheck_listfiles) ; \ ++ exit 1; } >&2 ++check-am: all-am ++check: check-recursive + all-am: Makefile $(SCRIPTS) config.h +- ++installdirs: installdirs-recursive ++installdirs-am: ++install: install-recursive + install-exec: install-exec-recursive +- @$(NORMAL_INSTALL) +- + install-data: install-data-recursive +- @$(NORMAL_INSTALL) +- +-install: install-recursive +- @: +- + uninstall: uninstall-recursive + +-install-strip: +- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install +-installdirs: installdirs-recursive +- ++install-am: all-am ++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + ++installcheck: installcheck-recursive ++install-strip: ++ if test -z '$(STRIP)'; then \ ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ install; \ ++ else \ ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ ++ fi + mostlyclean-generic: +- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) + + clean-generic: +- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + + distclean-generic: +- -rm -f Makefile $(DISTCLEANFILES) +- -rm -f config.cache config.log stamp-h stamp-h[0-9]* + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: +- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) +-mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean: clean-recursive + +-clean-am: clean-hdr clean-tags clean-generic mostlyclean-am ++clean-am: clean-generic mostlyclean-am + +-distclean-am: distclean-hdr distclean-tags distclean-generic clean-am ++distclean: distclean-recursive ++ -rm -f $(am__CONFIG_DISTCLEAN_FILES) ++ -rm -f Makefile ++distclean-am: clean-am distclean-generic distclean-hdr distclean-tags + +-maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \ +- maintainer-clean-generic distclean-am ++dvi: dvi-recursive + +-mostlyclean: mostlyclean-recursive mostlyclean-am ++dvi-am: + +-clean: clean-recursive clean-am ++html: html-recursive + +-distclean: distclean-recursive distclean-am +- -rm -f config.status ++html-am: + +-maintainer-clean: maintainer-clean-recursive maintainer-clean-am +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." +- -rm -f config.status ++info: info-recursive ++ ++info-am: ++ ++install-data-am: ++ ++install-dvi: install-dvi-recursive ++ ++install-dvi-am: ++ ++install-exec-am: ++ ++install-html: install-html-recursive ++ ++install-html-am: ++ ++install-info: install-info-recursive ++ ++install-info-am: ++ ++install-man: ++ ++install-pdf: install-pdf-recursive ++ ++install-pdf-am: ++ ++install-ps: install-ps-recursive ++ ++install-ps-am: ++ ++installcheck-am: ++ ++maintainer-clean: maintainer-clean-recursive ++ -rm -f $(am__CONFIG_DISTCLEAN_FILES) ++ -rm -rf $(top_srcdir)/autom4te.cache ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic ++ ++mostlyclean: mostlyclean-recursive ++ ++mostlyclean-am: mostlyclean-generic ++ ++pdf: pdf-recursive ++ ++pdf-am: ++ ++ps: ps-recursive ++ ++ps-am: ++ ++uninstall-am: ++ ++.MAKE: $(am__recursive_targets) all install-am install-strip ++ ++.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ ++ am--refresh check check-am clean clean-cscope clean-generic \ ++ cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ ++ dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \ ++ dist-zip distcheck distclean distclean-generic distclean-hdr \ ++ distclean-tags distcleancheck distdir distuninstallcheck dvi \ ++ dvi-am html html-am info info-am install install-am \ ++ install-data install-data-am install-dvi install-dvi-am \ ++ install-exec install-exec-am install-html install-html-am \ ++ install-info install-info-am install-man install-pdf \ ++ install-pdf-am install-ps install-ps-am install-strip \ ++ installcheck installcheck-am installdirs installdirs-am \ ++ maintainer-clean maintainer-clean-generic mostlyclean \ ++ mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ ++ uninstall-am + +-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \ +-install-data-recursive uninstall-data-recursive install-exec-recursive \ +-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ +-all-recursive check-recursive installcheck-recursive info-recursive \ +-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ +-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +-distclean-tags clean-tags maintainer-clean-tags distdir info dvi \ +-installcheck all-recursive-am all-am install-exec install-data install \ +-uninstall all installdirs mostlyclean-generic distclean-generic \ +-clean-generic maintainer-clean-generic clean mostlyclean distclean \ +-maintainer-clean ++.PRECIOUS: Makefile + + + dist-hook: +- mkdir $(distdir)/debian + cp -fa $(srcdir)/debian/changelog $(distdir)/debian/ + cp -fa $(srcdir)/debian/control $(distdir)/debian/ + cp -fa $(srcdir)/debian/copyright $(distdir)/debian/ +diff -uprN clean/lrzsz-0.12.20/man/Makefile.in lrzsz-0.12.20/man/Makefile.in +--- clean/lrzsz-0.12.20/man/Makefile.in 1998-12-30 16:31:48.000000000 +0000 ++++ lrzsz-0.12.20/man/Makefile.in 2019-11-26 11:37:46.000000000 +0000 +@@ -1,6 +1,8 @@ +-# Makefile.in generated automatically by automake 1.3 from Makefile.am ++# Makefile.in generated by automake 1.16.1 from Makefile.am. ++# @configure_input@ ++ ++# Copyright (C) 1994-2018 Free Software Foundation, Inc. + +-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -10,219 +12,503 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + +- +-SHELL = /bin/sh +- +-srcdir = @srcdir@ +-top_srcdir = @top_srcdir@ ++@SET_MAKE@ + VPATH = @srcdir@ +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +- +-bindir = @bindir@ +-sbindir = @sbindir@ +-libexecdir = @libexecdir@ +-datadir = @datadir@ +-sysconfdir = @sysconfdir@ +-sharedstatedir = @sharedstatedir@ +-localstatedir = @localstatedir@ +-libdir = @libdir@ +-infodir = @infodir@ +-mandir = @mandir@ +-includedir = @includedir@ +-oldincludedir = /usr/include +- +-DISTDIR = +- ++am__is_gnu_make = { \ ++ if test -z '$(MAKELEVEL)'; then \ ++ false; \ ++ elif test -n '$(MAKE_HOST)'; then \ ++ true; \ ++ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ ++ true; \ ++ else \ ++ false; \ ++ fi; \ ++} ++am__make_running_with_option = \ ++ case $${target_option-} in \ ++ ?) ;; \ ++ *) echo "am__make_running_with_option: internal error: invalid" \ ++ "target option '$${target_option-}' specified" >&2; \ ++ exit 1;; \ ++ esac; \ ++ has_opt=no; \ ++ sane_makeflags=$$MAKEFLAGS; \ ++ if $(am__is_gnu_make); then \ ++ sane_makeflags=$$MFLAGS; \ ++ else \ ++ case $$MAKEFLAGS in \ ++ *\\[\ \ ]*) \ ++ bs=\\; \ ++ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ ++ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ ++ esac; \ ++ fi; \ ++ skip_next=no; \ ++ strip_trailopt () \ ++ { \ ++ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ ++ }; \ ++ for flg in $$sane_makeflags; do \ ++ test $$skip_next = yes && { skip_next=no; continue; }; \ ++ case $$flg in \ ++ *=*|--*) continue;; \ ++ -*I) strip_trailopt 'I'; skip_next=yes;; \ ++ -*I?*) strip_trailopt 'I';; \ ++ -*O) strip_trailopt 'O'; skip_next=yes;; \ ++ -*O?*) strip_trailopt 'O';; \ ++ -*l) strip_trailopt 'l'; skip_next=yes;; \ ++ -*l?*) strip_trailopt 'l';; \ ++ -[dEDm]) skip_next=yes;; \ ++ -[JT]) skip_next=yes;; \ ++ esac; \ ++ case $$flg in \ ++ *$$target_option*) has_opt=yes; break;; \ ++ esac; \ ++ done; \ ++ test $$has_opt = yes ++am__make_dryrun = (target_option=n; $(am__make_running_with_option)) ++am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) + pkgdatadir = $(datadir)/@PACKAGE@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +- +-top_builddir = .. +- +-ACLOCAL = @ACLOCAL@ +-AUTOCONF = @AUTOCONF@ +-AUTOMAKE = @AUTOMAKE@ +-AUTOHEADER = @AUTOHEADER@ +- +-INSTALL = @INSTALL@ +-INSTALL_PROGRAM = @INSTALL_PROGRAM@ +-INSTALL_DATA = @INSTALL_DATA@ +-INSTALL_SCRIPT = @INSTALL_SCRIPT@ +-transform = @program_transform_name@ +- ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : +-CATALOGS = @CATALOGS@ +-CATOBJEXT = @CATOBJEXT@ ++build_triplet = @build@ ++host_triplet = @host@ ++subdir = man ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ ++ $(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \ ++ $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ ++ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ ++ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ ++ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \ ++ $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) ++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ++CONFIG_HEADER = $(top_builddir)/config.h ++CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = ++AM_V_P = $(am__v_P_@AM_V@) ++am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) ++am__v_P_0 = false ++am__v_P_1 = : ++AM_V_GEN = $(am__v_GEN_@AM_V@) ++am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) ++am__v_GEN_0 = @echo " GEN " $@; ++am__v_GEN_1 = ++AM_V_at = $(am__v_at_@AM_V@) ++am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) ++am__v_at_0 = @ ++am__v_at_1 = ++SOURCES = ++DIST_SOURCES = ++am__can_run_installinfo = \ ++ case $$AM_UPDATE_INFO_DIR in \ ++ n|no|NO) false;; \ ++ *) (install-info --version) >/dev/null 2>&1;; \ ++ esac ++am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; ++am__vpath_adj = case $$p in \ ++ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ ++ *) f=$$p;; \ ++ esac; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' ++am__uninstall_files_from_dir = { \ ++ test -z "$$files" \ ++ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ ++ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ ++ $(am__cd) "$$dir" && rm -f $$files; }; \ ++ } ++man1dir = $(mandir)/man1 ++am__installdirs = "$(DESTDIR)$(man1dir)" ++NROFF = nroff ++MANS = $(man_MANS) ++am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) ++am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/mkinstalldirs ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++ACLOCAL = @ACLOCAL@ ++ALLOCA = @ALLOCA@ ++AMTAR = @AMTAR@ ++AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ + CC = @CC@ ++CCDEPMODE = @CCDEPMODE@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ +-DATADIRNAME = @DATADIRNAME@ ++CPPFLAGS = @CPPFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ ++EGREP = @EGREP@ + ENABLE_TIMESYNC = @ENABLE_TIMESYNC@ +-GENCAT = @GENCAT@ +-GMOFILES = @GMOFILES@ ++EXEEXT = @EXEEXT@ ++GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ + GMSGFMT = @GMSGFMT@ +-GT_NO = @GT_NO@ +-GT_YES = @GT_YES@ +-INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@ +-INSTOBJEXT = @INSTOBJEXT@ +-INTLDEPS = @INTLDEPS@ ++GMSGFMT_015 = @GMSGFMT_015@ ++GREP = @GREP@ ++INSTALL = @INSTALL@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INTLLIBS = @INTLLIBS@ +-INTLOBJS = @INTLOBJS@ ++INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ + LDFLAGS = @LDFLAGS@ ++LIBICONV = @LIBICONV@ ++LIBINTL = @LIBINTL@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ ++LTLIBICONV = @LTLIBICONV@ ++LTLIBINTL = @LTLIBINTL@ ++LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKINSTALLDIRS = @MKINSTALLDIRS@ ++MKDIR_P = @MKDIR_P@ + MSGFMT = @MSGFMT@ ++MSGMERGE = @MSGMERGE@ ++MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@ ++OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ +-POFILES = @POFILES@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ + POSUB = @POSUB@ + RANLIB = @RANLIB@ +-U = @U@ +-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ ++SED = @SED@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ ++STRIP = @STRIP@ + USE_NLS = @USE_NLS@ + VERSION = @VERSION@ +-l = @l@ +- ++XGETTEXT = @XGETTEXT@ ++XGETTEXT_015 = @XGETTEXT_015@ ++XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ ++abs_builddir = @abs_builddir@ ++abs_srcdir = @abs_srcdir@ ++abs_top_builddir = @abs_top_builddir@ ++abs_top_srcdir = @abs_top_srcdir@ ++ac_ct_CC = @ac_ct_CC@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++builddir = @builddir@ ++datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++htmldir = @htmldir@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localedir = @localedir@ ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++psdir = @psdir@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++srcdir = @srcdir@ ++sysconfdir = @sysconfdir@ ++target_alias = @target_alias@ ++top_build_prefix = @top_build_prefix@ ++top_builddir = @top_builddir@ ++top_srcdir = @top_srcdir@ + man_MANS = lrz.1 lsz.1 + EXTRA_DIST = lrz.1 lsz.1 +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_HEADER = ../config.h +-CONFIG_CLEAN_FILES = +-man1dir = $(mandir)/man1 +-MANS = $(man_MANS) ++all: all-am + +-NROFF = nroff +-DIST_COMMON = Makefile.am Makefile.in ++.SUFFIXES: ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ ++ && { if test -f $@; then exit 0; else break; fi; }; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu man/Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ ++ esac; ++ ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++$(top_srcdir)/configure: $(am__configure_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): ++install-man1: $(man_MANS) ++ @$(NORMAL_INSTALL) ++ @list1=''; \ ++ list2='$(man_MANS)'; \ ++ test -n "$(man1dir)" \ ++ && test -n "`echo $$list1$$list2`" \ ++ || exit 0; \ ++ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ ++ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ ++ { for i in $$list1; do echo "$$i"; done; \ ++ if test -n "$$list2"; then \ ++ for i in $$list2; do echo "$$i"; done \ ++ | sed -n '/\.1[a-z]*$$/p'; \ ++ fi; \ ++ } | while read p; do \ ++ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ ++ echo "$$d$$p"; echo "$$p"; \ ++ done | \ ++ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ ++ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ ++ sed 'N;N;s,\n, ,g' | { \ ++ list=; while read file base inst; do \ ++ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ ++ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ ++ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ ++ fi; \ ++ done; \ ++ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ ++ while read files; do \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ ++ done; } + ++uninstall-man1: ++ @$(NORMAL_UNINSTALL) ++ @list=''; test -n "$(man1dir)" || exit 0; \ ++ files=`{ for i in $$list; do echo "$$i"; done; \ ++ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ ++ sed -n '/\.1[a-z]*$$/p'; \ ++ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ ++ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ ++ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) ++tags TAGS: ++ ++ctags CTAGS: ++ ++cscope cscopelist: ++ ++ ++distdir: $(BUILT_SOURCES) ++ $(MAKE) $(AM_MAKEFLAGS) distdir-am ++ ++distdir-am: $(DISTFILES) ++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ list='$(DISTFILES)'; \ ++ dist_files=`for file in $$list; do echo $$file; done | \ ++ sed -e "s|^$$srcdirstrip/||;t" \ ++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ ++ case $$dist_files in \ ++ */*) $(MKDIR_P) `echo "$$dist_files" | \ ++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ ++ sort -u` ;; \ ++ esac; \ ++ for file in $$dist_files; do \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ if test -d $$d/$$file; then \ ++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ ++ else \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ ++ || exit 1; \ ++ fi; \ ++ done ++check-am: all-am ++check: check-am ++all-am: Makefile $(MANS) ++installdirs: ++ for dir in "$(DESTDIR)$(man1dir)"; do \ ++ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ done ++install: install-am ++install-exec: install-exec-am ++install-data: install-data-am ++uninstall: uninstall-am + +-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) ++install-am: all-am ++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +-TAR = tar +-GZIP = --best +-all: Makefile $(MANS) ++installcheck: installcheck-am ++install-strip: ++ if test -z '$(STRIP)'; then \ ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ install; \ ++ else \ ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ ++ fi ++mostlyclean-generic: + +-.SUFFIXES: +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps man/Makefile ++clean-generic: + +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +- cd $(top_builddir) \ +- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status ++distclean-generic: ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + ++maintainer-clean-generic: ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean: clean-am + +-install-man1: +- $(mkinstalldirs) $(DESTDIR)$(man1dir) +- @list='$(man1_MANS)'; \ +- l2='$(man_MANS)'; for i in $$l2; do \ +- case "$$i" in \ +- *.1*) list="$$list $$i" ;; \ +- esac; \ +- done; \ +- for i in $$list; do \ +- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ +- else file=$$i; fi; \ +- ext=`echo $$i | sed -e 's/^.*\\.//'`; \ +- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ +- inst=`echo $$inst | sed '$(transform)'`.$$ext; \ +- echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ +- $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ +- done ++clean-am: clean-generic mostlyclean-am + +-uninstall-man1: +- @list='$(man1_MANS)'; \ +- l2='$(man_MANS)'; for i in $$l2; do \ +- case "$$i" in \ +- *.1*) list="$$list $$i" ;; \ +- esac; \ +- done; \ +- for i in $$list; do \ +- ext=`echo $$i | sed -e 's/^.*\\.//'`; \ +- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ +- inst=`echo $$inst | sed '$(transform)'`.$$ext; \ +- echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ +- rm -f $(DESTDIR)$(man1dir)/$$inst; \ +- done +-install-man: $(MANS) +- @$(NORMAL_INSTALL) +- $(MAKE) install-man1 +-uninstall-man: +- @$(NORMAL_UNINSTALL) +- $(MAKE) uninstall-man1 +-tags: TAGS +-TAGS: ++distclean: distclean-am ++ -rm -f Makefile ++distclean-am: clean-am distclean-generic + ++dvi: dvi-am + +-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) ++dvi-am: + +-subdir = man ++html: html-am + +-distdir: $(DISTFILES) +- @for file in $(DISTFILES); do \ +- d=$(srcdir); \ +- test -f $(distdir)/$$file \ +- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ +- || cp -p $$d/$$file $(distdir)/$$file; \ +- done +-info: +-dvi: +-check: all +- $(MAKE) +-installcheck: +-install-exec: +- @$(NORMAL_INSTALL) ++html-am: + +-install-data: install-man +- @$(NORMAL_INSTALL) ++info: info-am + +-install: install-exec install-data all +- @: ++info-am: + +-uninstall: uninstall-man ++install-data-am: install-man + +-install-strip: +- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install +-installdirs: +- $(mkinstalldirs) $(DESTDIR)$(mandir)/man1 ++install-dvi: install-dvi-am + ++install-dvi-am: + +-mostlyclean-generic: +- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) ++install-exec-am: + +-clean-generic: +- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) ++install-html: install-html-am + +-distclean-generic: +- -rm -f Makefile $(DISTCLEANFILES) +- -rm -f config.cache config.log stamp-h stamp-h[0-9]* +- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++install-html-am: + +-maintainer-clean-generic: +- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) +-mostlyclean: mostlyclean-generic ++install-info: install-info-am + +-clean: clean-generic mostlyclean ++install-info-am: + +-distclean: distclean-generic clean +- -rm -f config.status ++install-man: install-man1 + +-maintainer-clean: maintainer-clean-generic distclean +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." ++install-pdf: install-pdf-am ++ ++install-pdf-am: ++ ++install-ps: install-ps-am ++ ++install-ps-am: ++ ++installcheck-am: ++ ++maintainer-clean: maintainer-clean-am ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic ++ ++mostlyclean: mostlyclean-am ++ ++mostlyclean-am: mostlyclean-generic ++ ++pdf: pdf-am ++ ++pdf-am: ++ ++ps: ps-am ++ ++ps-am: ++ ++uninstall-am: uninstall-man ++ ++uninstall-man: uninstall-man1 ++ ++.MAKE: install-am install-strip ++ ++.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ ++ ctags-am distclean distclean-generic distdir dvi dvi-am html \ ++ html-am info info-am install install-am install-data \ ++ install-data-am install-dvi install-dvi-am install-exec \ ++ install-exec-am install-html install-html-am install-info \ ++ install-info-am install-man install-man1 install-pdf \ ++ install-pdf-am install-ps install-ps-am install-strip \ ++ installcheck installcheck-am installdirs maintainer-clean \ ++ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ ++ pdf-am ps ps-am tags-am uninstall uninstall-am uninstall-man \ ++ uninstall-man1 + +-.PHONY: install-man1 uninstall-man1 install-man uninstall-man tags \ +-distdir info dvi installcheck install-exec install-data install \ +-uninstall all installdirs mostlyclean-generic distclean-generic \ +-clean-generic maintainer-clean-generic clean mostlyclean distclean \ +-maintainer-clean ++.PRECIOUS: Makefile + + + # Tell versions [3.59,3.63) of GNU make to not export all variables. +diff -uprN clean/lrzsz-0.12.20/po/boldquot.sed lrzsz-0.12.20/po/boldquot.sed +--- clean/lrzsz-0.12.20/po/boldquot.sed 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/po/boldquot.sed 2019-11-25 18:21:17.000000000 +0000 +@@ -0,0 +1,10 @@ ++s/"\([^"]*\)"/“\1â€/g ++s/`\([^`']*\)'/‘\1’/g ++s/ '\([^`']*\)' / ‘\1’ /g ++s/ '\([^`']*\)'$/ ‘\1’/g ++s/^'\([^`']*\)' /‘\1’ /g ++s/“â€/""/g ++s/“/“[1m/g ++s/â€/[0mâ€/g ++s/‘/‘[1m/g ++s/’/[0m’/g +diff -uprN clean/lrzsz-0.12.20/po/cat-id-tbl.c lrzsz-0.12.20/po/cat-id-tbl.c +--- clean/lrzsz-0.12.20/po/cat-id-tbl.c 1998-12-29 09:24:24.000000000 +0000 ++++ lrzsz-0.12.20/po/cat-id-tbl.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,234 +0,0 @@ +-/* Automatically generated by po2tbl.sed from lrzsz.pot. */ +- +-#if HAVE_CONFIG_H +-# include <config.h> +-#endif +- +-#include "libgettext.h" +- +-const struct _msg_ent _msg_tbl[] = { +- {"", 1}, +- {"io_mode(,2) in rbsb.c not implemented\n", 2}, +- {"caught signal %d; exiting", 3}, +- {"command tries", 4}, +- {"packetlength", 5}, +- {"packetlength out of range 24..%ld", 6}, +- {"framelength", 7}, +- {"framelength out of range 32..%ld", 8}, +- {"min_bps", 9}, +- {"min_bps must be >= 0", 10}, +- {"min_bps_time", 11}, +- {"min_bps_time must be > 1", 12}, +- {"hour to large (0..23)", 13}, +- {"unparsable stop time\n", 14}, +- {"minute to large (0..59)", 15}, +- {"stop time to small", 16}, +- {"stop-at", 17}, +- {"timeout", 18}, +- {"timeout out of range 10..1000", 19}, +- {"security violation: can't do that under restricted shell\n", 20}, +- {"window size", 21}, +- {"cannot turnoff syslog", 22}, +- {"startup delay", 23}, +- {"out of memory", 24}, +- {"this program was never intended to be used setuid\n", 25}, +- {"need at least one file to send", 26}, +- {"Can't send command in restricted mode\n", 27}, +- {"hostname too long\n", 28}, +- {"illegal server address\n", 29}, +- {"can read only one file from stdin", 30}, +- {"Transfer incomplete\n", 31}, +- {"Transfer complete\n", 32}, +- {"send_pseudo %s: cannot open tmpfile %s: %s", 33}, +- {"send_pseudo %s: cannot lstat tmpfile %s: %s", 34}, +- {"send_pseudo %s: avoiding symlink trap", 35}, +- {"send_pseudo %s: cannot write to tmpfile %s: %s", 36}, +- {"send_pseudo %s: failed", 37}, +- {"send_pseudo %s: ok", 38}, +- {"tcp protocol init failed\n", 39}, +- {"Answering TIMESYNC at %s", 40}, +- {"timezone", 41}, +- {"timezone unknown", 42}, +- {"Can't open any requested files.", 43}, +- {"security violation: not allowed to upload from %s", 44}, +- {"cannot open %s", 45}, +- {"is not a file: %s", 46}, +- {"%s/%s: error occured", 47}, +- {"skipped: %s", 48}, +- {"%s/%s: skipped", 49}, +- {"Bytes Sent:%7ld BPS:%-8ld \n", 50}, +- {"Sending %s, %ld blocks: ", 51}, +- {"Give your local XMODEM receive command now.", 52}, +- {"Sending: %s\n", 53}, +- {"Timeout on pathname", 54}, +- {"Receiver Cancelled", 55}, +- {"No ACK on EOT", 56}, +- {"Xmodem sectors/kbytes sent: %3d/%2dk", 57}, +- {"Ymodem sectors/kbytes sent: %3d/%2dk", 58}, +- {"Cancelled", 59}, +- {"Timeout on sector ACK", 60}, +- {"NAK on sector", 61}, +- {"Got burst for sector ACK", 62}, +- {"Got %02x for sector ACK", 63}, +- {"Retry Count Exceeded", 64}, +- {"Try `%s --help' for more information.\n", 65}, +- {"%s version %s\n", 66}, +- {"Usage: %s [options] file ...\n", 67}, +- {" or: %s [options] -{c|i} COMMAND\n", 68}, +- {"Send file(s) with ZMODEM/YMODEM/XMODEM protocol\n", 69}, +- {"\ +- (X) = option applies to XMODEM only\n\ +- (Y) = option applies to YMODEM only\n\ +- (Z) = option applies to ZMODEM only\n", 70}, +- {"\ +- -+, --append append to existing destination file (Z)\n\ +- -2, --twostop use 2 stop bits\n\ +- -4, --try-4k go up to 4K blocksize\n\ +- --start-4k start with 4K blocksize (doesn't try 8)\n\ +- -8, --try-8k go up to 8K blocksize\n\ +- --start-8k start with 8K blocksize\n\ +- -a, --ascii ASCII transfer (change CR/LF to LF)\n\ +- -b, --binary binary transfer\n\ +- -B, --bufsize N buffer N bytes (N==auto: buffer whole file)\n\ +- -c, --command COMMAND execute remote command COMMAND (Z)\n\ +- -C, --command-tries N try N times to execute a command (Z)\n\ +- -d, --dot-to-slash change '.' to '/' in pathnames (Y/Z)\n\ +- --delay-startup N sleep N seconds before doing anything\n\ +- -e, --escape escape all control characters (Z)\n\ +- -E, --rename force receiver to rename files it already has\n\ +- -f, --full-path send full pathname (Y/Z)\n\ +- -i, --immediate-command CMD send remote CMD, return immediately (Z)\n\ +- -h, --help print this usage message\n\ +- -k, --1k send 1024 byte packets (X)\n\ +- -L, --packetlen N limit subpacket length to N bytes (Z)\n\ +- -l, --framelen N limit frame length to N bytes (l>=L) (Z)\n\ +- -m, --min-bps N stop transmission if BPS below N\n\ +- -M, --min-bps-time N for at least N seconds (default: 120)\n", 71}, +- {"\ +- -n, --newer send file if source newer (Z)\n\ +- -N, --newer-or-longer send file if source newer or longer (Z)\n\ +- -o, --16-bit-crc use 16 bit CRC instead of 32 bit CRC (Z)\n\ +- -O, --disable-timeouts disable timeout code, wait forever\n\ +- -p, --protect protect existing destination file (Z)\n\ +- -r, --resume resume interrupted file transfer (Z)\n\ +- -R, --restricted restricted, more secure mode\n\ +- -q, --quiet quiet (no progress reports)\n\ +- -s, --stop-at {HH:MM|+N} stop transmission at HH:MM or in N seconds\n\ +- --tcp build a TCP connection to transmit files\n\ +- --tcp-server open socket, wait for connection\n\ +- -u, --unlink unlink file after transmission\n\ +- -U, --unrestrict turn off restricted mode (if allowed to)\n\ +- -v, --verbose be verbose, provide debugging information\n\ +- -w, --windowsize N Window is N bytes (Z)\n\ +- -X, --xmodem use XMODEM protocol\n\ +- -y, --overwrite overwrite existing files\n\ +- -Y, --overwrite-or-skip overwrite existing files, else skip\n\ +- --ymodem use YMODEM protocol\n\ +- -Z, --zmodem use ZMODEM protocol\n\ +-\n\ +-short options use the same arguments as the long ones\n", 72}, +- {"got ZRQINIT", 73}, +- {"got ZCAN", 74}, +- {"blklen now %d\n", 75}, +- {"zsendfdata: bps rate %ld below min %ld", 76}, +- {"zsendfdata: reached stop time", 77}, +- {"Bytes Sent:%7ld/%7ld BPS:%-8ld ETA %02d:%02d ", 78}, +- {"calc_blklen: reduced to %d due to error\n", 79}, +- {"calc_blklen: returned old value %d due to low bpe diff\n", 80}, +- {"calc_blklen: old %ld, new %ld, d %ld\n", 81}, +- {"calc_blklen: calc total_bytes=%ld, bpe=%ld, ec=%ld\n", 82}, +- {"calc_blklen: blklen %d, ok %ld, failed %ld -> %lu\n", 83}, +- {"calc_blklen: returned %d as best\n", 84}, +- {"\ +-\n\ +-countem: Total %d %ld\n", 85}, +- {"Bad escape sequence %x", 86}, +- {"Sender Canceled", 87}, +- {"TIMEOUT", 88}, +- {"Bad data subpacket", 89}, +- {"Data subpacket too long", 90}, +- {"Garbage count exceeded", 91}, +- {"Got %s", 92}, +- {"Retry %d: ", 93}, +- {"don't have settimeofday, will not set time\n", 94}, +- {"not running as root (this is good!), can not set time\n", 95}, +- {"bytes_per_error", 96}, +- {"bytes-per-error should be >100", 97}, +- {"O_SYNC not supported by the kernel", 98}, +- {"garbage on commandline", 99}, +- {"Usage: %s [options] [filename.if.xmodem]\n", 100}, +- {"Receive files with ZMODEM/YMODEM/XMODEM protocol\n", 101}, +- {"\ +- -+, --append append to existing files\n\ +- -a, --ascii ASCII transfer (change CR/LF to LF)\n\ +- -b, --binary binary transfer\n\ +- -B, --bufsize N buffer N bytes (N==auto: buffer whole file)\n\ +- -c, --with-crc Use 16 bit CRC (X)\n\ +- -C, --allow-remote-commands allow execution of remote commands (Z)\n\ +- -D, --null write all received data to /dev/null\n\ +- --delay-startup N sleep N seconds before doing anything\n\ +- -e, --escape Escape control characters (Z)\n\ +- -E, --rename rename any files already existing\n\ +- --errors N generate CRC error every N bytes (debugging)\n\ +- -h, --help Help, print this usage message\n\ +- -m, --min-bps N stop transmission if BPS below N\n\ +- -M, --min-bps-time N for at least N seconds (default: 120)\n\ +- -O, --disable-timeouts disable timeout code, wait forever for data\n\ +- --o-sync open output file(s) in synchronous write mode\n\ +- -p, --protect protect existing files\n\ +- -q, --quiet quiet, no progress reports\n\ +- -r, --resume try to resume interrupted file transfer (Z)\n\ +- -R, --restricted restricted, more secure mode\n\ +- -s, --stop-at {HH:MM|+N} stop transmission at HH:MM or in N seconds\n\ +- -S, --timesync request remote time (twice: set local time)\n\ +- --syslog[=off] turn syslog on or off, if possible\n\ +- -t, --timeout N set timeout to N tenths of a second\n\ +- -u, --keep-uppercase keep upper case filenames\n\ +- -U, --unrestrict disable restricted mode (if allowed to)\n\ +- -v, --verbose be verbose, provide debugging information\n\ +- -w, --windowsize N Window is N bytes (Z)\n\ +- -X --xmodem use XMODEM protocol\n\ +- -y, --overwrite Yes, clobber existing file if any\n\ +- --ymodem use YMODEM protocol\n\ +- -Z, --zmodem use ZMODEM protocol\n\ +-\n\ +-short options use the same arguments as the long ones\n", 102}, +- {"%s waiting to receive.", 103}, +- {"\rBytes received: %7ld/%7ld BPS:%-6ld \r\n", 104}, +- {"%s: ready to receive %s", 105}, +- {"\rBytes received: %7ld BPS:%-6ld \r\n", 106}, +- {"\ +-\r\n\ +-%s: %s removed.\r\n", 107}, +- {"Pathname fetch returned EOT", 108}, +- {"Received dup Sector", 109}, +- {"Sync Error", 110}, +- {"CRC", 111}, +- {"Checksum", 112}, +- {"Sector number garbled", 113}, +- {"Sender Cancelled", 114}, +- {"Got 0%o sector header", 115}, +- {"file name ends with a /, skipped: %s\n", 116}, +- {"zmanag=%d, Lzmanag=%d\n", 117}, +- {"zconv=%d\n", 118}, +- {"file exists, skipped: %s\n", 119}, +- {"TIMESYNC: here %ld, remote %ld, diff %ld seconds\n", 120}, +- {"TIMESYNC: cannot set time: %s\n", 121}, +- {"cannot tmpfile() for tcp protocol synchronization", 122}, +- {"Topipe", 123}, +- {"Receiving: %s\n", 124}, +- {"Blocks received: %d", 125}, +- {"%s: %s exists\n", 126}, +- {"%s:\tSecurity Violation", 127}, +- {"remote command execution requested", 128}, +- {"not executed", 129}, +- {"got ZRINIT", 130}, +- {"Skipped", 131}, +- {"rzfile: bps rate %ld below min %ld", 132}, +- {"rzfile: reached stop time", 133}, +- {"\rBytes received: %7ld/%7ld BPS:%-6ld ETA %02d:%02d ", 134}, +- {"fgets for tcp protocol synchronization failed: ", 135}, +- {"file close error", 136}, +-}; +- +-int _msg_tbl_length = 136; +diff -uprN clean/lrzsz-0.12.20/po/ChangeLog lrzsz-0.12.20/po/ChangeLog +--- clean/lrzsz-0.12.20/po/ChangeLog 1998-04-26 14:20:52.000000000 +0100 ++++ lrzsz-0.12.20/po/ChangeLog 2019-11-25 18:21:03.000000000 +0000 +@@ -1,3 +1,25 @@ ++2019-11-25 gettextize <bug-gnu-gettext@gnu.org> ++ ++ * Makefile.in.in: Upgrade to gettext-0.20.1. ++ * en@boldquot.header: Upgrade to gettext-0.20.1. ++ * en@quot.header: Upgrade to gettext-0.20.1. ++ * insert-header.sin: Upgrade to gettext-0.20.1. ++ * remove-potcdate.sin: Upgrade to gettext-0.20.1. ++ * Rules-quot: Upgrade to gettext-0.20.1. ++ ++2019-11-25 gettextize <bug-gnu-gettext@gnu.org> ++ ++ * Makefile.in.in: Upgrade to gettext-0.19.8.1. ++ * boldquot.sed: New file, from gettext-0.19.8.1. ++ * en@boldquot.header: New file, from gettext-0.19.8.1. ++ * en@quot.header: New file, from gettext-0.19.8.1. ++ * insert-header.sin: New file, from gettext-0.19.8.1. ++ * quot.sed: New file, from gettext-0.19.8.1. ++ * remove-potcdate.sin: New file, from gettext-0.19.8.1. ++ * Rules-quot: New file, from gettext-0.19.8.1. ++ * cat-id-tbl.c: Remove file. ++ * stamp-cat-id: Remove file. ++ + /* Automatically generated by po2tbl.sed from lrzsz.pot. */ + + #if HAVE_CONFIG_H +Binary files clean/lrzsz-0.12.20/po/de.gmo and lrzsz-0.12.20/po/de.gmo differ +diff -uprN clean/lrzsz-0.12.20/po/de.po lrzsz-0.12.20/po/de.po +--- clean/lrzsz-0.12.20/po/de.po 1998-12-30 16:31:46.000000000 +0000 ++++ lrzsz-0.12.20/po/de.po 2019-11-26 11:42:07.000000000 +0000 +@@ -6,10 +6,12 @@ + msgid "" + msgstr "" + "Project-Id-Version: PACKAGE VERSION\n" +-"POT-Creation-Date: 1998-12-30 08:49+0100\n" ++"Report-Msgid-Bugs-To: \n" ++"POT-Creation-Date: 2019-11-26 11:39+0000\n" + "PO-Revision-Date: 1997-06-01 19:00+0200\n" + "Last-Translator: FULL NAME <uwe@ohse.de>\n" + "Language-Team: none. try <uwe@ohse.de>\n" ++"Language: de\n" + "MIME-Version: 1.0\n" + "Content-Type: text/plain; charset=iso-8859-1\n" + "Content-Transfer-Encoding: 8bit\n" +@@ -18,7 +20,7 @@ msgstr "" + msgid "io_mode(,2) in rbsb.c not implemented\n" + msgstr "io_mode(2) in rbsb.c nicht implementiert\n" + +-#: src/lrz.c:201 src/lsz.c:230 ++#: src/lsz.c:230 src/lrz.c:201 + #, c-format + msgid "caught signal %d; exiting" + msgstr "erhielt Signal %d; Programmabbruch" +@@ -45,7 +47,7 @@ msgstr "Framelänge" + msgid "framelength out of range 32..%ld" + msgstr "Argument der Option l außerhalb des Bereichs 32..%ld" + +-#: src/lrz.c:323 src/lsz.c:450 ++#: src/lsz.c:450 src/lrz.c:323 + msgid "min_bps" + msgstr "minimale BPS-Rate" + +@@ -53,65 +55,65 @@ msgstr "minimale BPS-Rate" + msgid "min_bps must be >= 0" + msgstr "minimale BPS-Rate muß >= 0 sein" + +-#: src/lrz.c:329 src/lsz.c:458 ++#: src/lsz.c:458 src/lrz.c:329 + msgid "min_bps_time" + msgstr "" + +-#: src/lrz.c:331 src/lsz.c:460 ++#: src/lsz.c:460 src/lrz.c:331 + msgid "min_bps_time must be > 1" + msgstr "Zeitfenster für minimale BPS-Rate muß > 1 Sekunde sein" + +-#: src/lrz.c:347 src/lsz.c:484 ++#: src/lsz.c:484 src/lrz.c:347 + msgid "hour to large (0..23)" + msgstr "Stunde zu gross (0..23)" + +-#: src/lrz.c:349 src/lsz.c:486 ++#: src/lsz.c:486 src/lrz.c:349 + msgid "unparsable stop time\n" + msgstr "unparsbare Endzeit\n" + +-#: src/lrz.c:353 src/lsz.c:490 ++#: src/lsz.c:490 src/lrz.c:353 + msgid "minute to large (0..59)" + msgstr "Minute zu groß (0..59)" + +-#: src/lrz.c:363 src/lrz.c:370 src/lsz.c:500 src/lsz.c:507 ++#: src/lsz.c:500 src/lsz.c:507 src/lrz.c:363 src/lrz.c:370 + msgid "stop time to small" + msgstr "Stopzeit zu kurz" + +-#: src/lrz.c:368 src/lsz.c:505 ++#: src/lsz.c:505 src/lrz.c:368 + msgid "stop-at" + msgstr "" + +-#: src/lrz.c:399 src/lsz.c:516 ++#: src/lsz.c:516 src/lrz.c:399 + msgid "timeout" + msgstr "Timeout" + +-#: src/lrz.c:401 src/lsz.c:518 ++#: src/lsz.c:518 src/lrz.c:401 + msgid "timeout out of range 10..1000" + msgstr "Argument der Option t außerhalb des Bereichs 10..1000" + +-#: src/lrz.c:417 src/lsz.c:526 ++#: src/lsz.c:526 src/lrz.c:417 + msgid "security violation: can't do that under restricted shell\n" + msgstr "Sicherheitsverstoß: Ausführung unter eingeschränkter Shell verboten\n" + +-#: src/lrz.c:407 src/lsz.c:533 ++#: src/lsz.c:533 src/lrz.c:407 + msgid "window size" + msgstr "Fenstergröße" + +-#: src/lrz.c:432 src/lrz.c:439 src/lsz.c:556 src/lsz.c:563 ++#: src/lsz.c:556 src/lsz.c:563 src/lrz.c:432 src/lrz.c:439 + msgid "cannot turnoff syslog" + msgstr "kann syslogging nicht abschalten" + +-#: src/lrz.c:454 src/lsz.c:571 ++#: src/lsz.c:571 src/lrz.c:454 + msgid "startup delay" + msgstr "Startverzögerung" + ++#: src/lsz.c:583 src/lsz.c:692 src/lsz.c:831 src/lsz.c:1080 src/zreadline.c:127 + #: src/lrz.c:470 src/lrz.c:755 src/lrz.c:1117 src/lrz.c:1243 src/lrz.c:1300 +-#: src/lrz.c:1317 src/lrz.c:1332 src/lrz.c:1431 src/lsz.c:583 src/lsz.c:692 +-#: src/lsz.c:831 src/lsz.c:1080 src/zreadline.c:127 ++#: src/lrz.c:1317 src/lrz.c:1332 src/lrz.c:1431 + msgid "out of memory" + msgstr "Kein Speicher mehr frei" + +-#: src/lrz.c:480 src/lsz.c:595 ++#: src/lsz.c:595 src/lrz.c:480 + msgid "this program was never intended to be used setuid\n" + msgstr "dieses Programm darf nicht setuid laufen\n" + +@@ -120,14 +122,15 @@ msgid "need at least one file to send" + msgstr "es muß mindestens ein Name einer zu sendenden Datei angegeben werden" + + #: src/lsz.c:628 ++#, c-format + msgid "Can't send command in restricted mode\n" + msgstr "Im eingeschränkten Modus ist das Senden von Kommandos verboten\n" + +-#: src/lrz.c:524 src/lsz.c:655 ++#: src/lsz.c:655 src/lrz.c:524 + msgid "hostname too long\n" + msgstr "Hostname zu lang\n" + +-#: src/lrz.c:539 src/lsz.c:670 ++#: src/lsz.c:670 src/lrz.c:539 + msgid "illegal server address\n" + msgstr "Illegale Serveraddresse\n" + +@@ -135,11 +138,11 @@ msgstr "Illegale Serveraddresse\n" + msgid "can read only one file from stdin" + msgstr "kann nur eine Datei von der Standardeingabe lesen" + +-#: src/lrz.c:571 src/lsz.c:806 ++#: src/lsz.c:806 src/lrz.c:571 + msgid "Transfer incomplete\n" + msgstr "Übertragung nicht abgeschlossen\n" + +-#: src/lrz.c:573 src/lsz.c:808 ++#: src/lsz.c:808 src/lrz.c:573 + msgid "Transfer complete\n" + msgstr "Übertragung abgeschlossen\n" + +@@ -197,9 +200,9 @@ msgstr "Kann keine der angeforderten Dat + #: src/lsz.c:1028 + #, c-format + msgid "security violation: not allowed to upload from %s" +-msgstr "Sicherheitsverstoß: Ausführung unter eingeschränkter Shell verboten" ++msgstr "Sicherheitsverstoß: Ausführung unter %s verboten" + +-#: src/lrz.c:1392 src/lsz.c:1046 ++#: src/lsz.c:1046 src/lrz.c:1392 + #, c-format + msgid "cannot open %s" + msgstr "kann %s nicht öffnen" +@@ -290,12 +293,12 @@ msgstr "Erhielt %02x als Sektorbestätigu + msgid "Retry Count Exceeded" + msgstr "Maximale Wiederholungsanzahl überschritten" + +-#: src/lrz.c:593 src/lsz.c:1521 ++#: src/lsz.c:1521 src/lrz.c:593 + #, c-format + msgid "Try `%s --help' for more information.\n" + msgstr "`%s --help' gibt weitere Informationen.\n" + +-#: src/lrz.c:598 src/lsz.c:1526 ++#: src/lsz.c:1526 src/lrz.c:598 + #, c-format + msgid "%s version %s\n" + msgstr "%s Version %s\n" +@@ -315,7 +318,7 @@ msgid "Send file(s) with ZMODEM/YMODEM/X + msgstr "Dateien mit ZMODEM/YMODEM/XMODEM übertragen\n" + + # src/lrz.c:475 src/lsz.c:1330 xx +-#: src/lrz.c:604 src/lsz.c:1534 ++#: src/lsz.c:1534 src/lrz.c:604 + msgid "" + " (X) = option applies to XMODEM only\n" + " (Y) = option applies to YMODEM only\n" +@@ -431,7 +434,7 @@ msgstr "" + msgid "got ZRQINIT" + msgstr "erhielt ZRQINIT" + +-#: src/lrz.c:1074 src/lrz.c:1787 src/lsz.c:1792 ++#: src/lsz.c:1792 src/lrz.c:1074 src/lrz.c:1787 + msgid "got ZCAN" + msgstr "erhielt ZCAN" + +@@ -472,7 +475,7 @@ msgstr "calc_blklen: alt %ld, neu %ld, D + #: src/lsz.c:2272 + #, c-format + msgid "calc_blklen: calc total_bytes=%ld, bpe=%ld, ec=%ld\n" +-msgstr "calc_blklen: kalkuliere gesamt_bytes=%ld, bpe=%le, ec=%ld\n" ++msgstr "calc_blklen: kalkuliere gesamt_bytes=%ld, bpe=%ld, ec=%ld\n" + + #: src/lsz.c:2283 + #, c-format +@@ -493,6 +496,10 @@ msgstr "" + "\n" + "countem: Gesamt %d %ld\n" + ++#: src/zm.c:91 ++msgid "Bad CRC" ++msgstr "" ++ + #: src/zm.c:244 + #, c-format + msgid "Bad escape sequence %x" +@@ -502,7 +509,7 @@ msgstr "Falsche Escapesequenz %x" + msgid "Sender Canceled" + msgstr "Sender brach ab" + +-#: src/lrz.c:997 src/zm.c:585 src/zm.c:644 ++#: src/zm.c:585 src/zm.c:644 src/lrz.c:997 + msgid "TIMEOUT" + msgstr "TIMEOUT" + +@@ -772,13 +779,11 @@ msgstr "Erhielt unerwartetes ZRINIT" + msgid "Skipped" + msgstr "Übersprungen" + +-#. too bad + #: src/lrz.c:2064 + #, c-format + msgid "rzfile: bps rate %ld below min %ld" + msgstr "rzfile: BPS-Rate %ld unter Minimum %ld" + +-#. too bad + #: src/lrz.c:2079 + msgid "rzfile: reached stop time" + msgstr "rzfile: Abbruchzeit erreicht" +diff -uprN clean/lrzsz-0.12.20/po/en@boldquot.header lrzsz-0.12.20/po/en@boldquot.header +--- clean/lrzsz-0.12.20/po/en@boldquot.header 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/po/en@boldquot.header 2019-11-25 18:21:17.000000000 +0000 +@@ -0,0 +1,25 @@ ++# All this catalog "translates" are quotation characters. ++# The msgids must be ASCII and therefore cannot contain real quotation ++# characters, only substitutes like grave accent (0x60), apostrophe (0x27) ++# and double quote (0x22). These substitutes look strange; see ++# https://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html ++# ++# This catalog translates grave accent (0x60) and apostrophe (0x27) to ++# left single quotation mark (U+2018) and right single quotation mark (U+2019). ++# It also translates pairs of apostrophe (0x27) to ++# left single quotation mark (U+2018) and right single quotation mark (U+2019) ++# and pairs of quotation mark (0x22) to ++# left double quotation mark (U+201C) and right double quotation mark (U+201D). ++# ++# When output to an UTF-8 terminal, the quotation characters appear perfectly. ++# When output to an ISO-8859-1 terminal, the single quotation marks are ++# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to ++# grave/acute accent (by libiconv), and the double quotation marks are ++# transliterated to 0x22. ++# When output to an ASCII terminal, the single quotation marks are ++# transliterated to apostrophes, and the double quotation marks are ++# transliterated to 0x22. ++# ++# This catalog furthermore displays the text between the quotation marks in ++# bold face, assuming the VT100/XTerm escape sequences. ++# +diff -uprN clean/lrzsz-0.12.20/po/en@quot.header lrzsz-0.12.20/po/en@quot.header +--- clean/lrzsz-0.12.20/po/en@quot.header 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/po/en@quot.header 2019-11-25 18:21:17.000000000 +0000 +@@ -0,0 +1,22 @@ ++# All this catalog "translates" are quotation characters. ++# The msgids must be ASCII and therefore cannot contain real quotation ++# characters, only substitutes like grave accent (0x60), apostrophe (0x27) ++# and double quote (0x22). These substitutes look strange; see ++# https://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html ++# ++# This catalog translates grave accent (0x60) and apostrophe (0x27) to ++# left single quotation mark (U+2018) and right single quotation mark (U+2019). ++# It also translates pairs of apostrophe (0x27) to ++# left single quotation mark (U+2018) and right single quotation mark (U+2019) ++# and pairs of quotation mark (0x22) to ++# left double quotation mark (U+201C) and right double quotation mark (U+201D). ++# ++# When output to an UTF-8 terminal, the quotation characters appear perfectly. ++# When output to an ISO-8859-1 terminal, the single quotation marks are ++# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to ++# grave/acute accent (by libiconv), and the double quotation marks are ++# transliterated to 0x22. ++# When output to an ASCII terminal, the single quotation marks are ++# transliterated to apostrophes, and the double quotation marks are ++# transliterated to 0x22. ++# +diff -uprN clean/lrzsz-0.12.20/po/insert-header.sin lrzsz-0.12.20/po/insert-header.sin +--- clean/lrzsz-0.12.20/po/insert-header.sin 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/po/insert-header.sin 2019-11-25 18:21:17.000000000 +0000 +@@ -0,0 +1,28 @@ ++# Sed script that inserts the file called HEADER before the header entry. ++# ++# Copyright (C) 2001 Free Software Foundation, Inc. ++# Written by Bruno Haible <bruno@clisp.org>, 2001. ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to use, copy, distribute, and modify it. ++# ++# At each occurrence of a line starting with "msgid ", we execute the following ++# commands. At the first occurrence, insert the file. At the following ++# occurrences, do nothing. The distinction between the first and the following ++# occurrences is achieved by looking at the hold space. ++/^msgid /{ ++x ++# Test if the hold space is empty. ++s/m/m/ ++ta ++# Yes it was empty. First occurrence. Read the file. ++r HEADER ++# Output the file's contents by reading the next line. But don't lose the ++# current line while doing this. ++g ++N ++bb ++:a ++# The hold space was nonempty. Following occurrences. Do nothing. ++x ++:b ++} +diff -uprN clean/lrzsz-0.12.20/po/lrzsz.pot lrzsz-0.12.20/po/lrzsz.pot +--- clean/lrzsz-0.12.20/po/lrzsz.pot 1998-12-30 07:50:00.000000000 +0000 ++++ lrzsz-0.12.20/po/lrzsz.pot 2019-11-26 11:39:12.000000000 +0000 +@@ -1,24 +1,27 @@ + # SOME DESCRIPTIVE TITLE. + # Copyright (C) YEAR Free Software Foundation, Inc. ++# This file is distributed under the same license as the lrzsz package. + # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. + # + #, fuzzy + msgid "" + msgstr "" +-"Project-Id-Version: PACKAGE VERSION\n" +-"POT-Creation-Date: 1998-12-30 08:49+0100\n" ++"Project-Id-Version: lrzsz 0.12.20\n" ++"Report-Msgid-Bugs-To: \n" ++"POT-Creation-Date: 2019-11-26 11:39+0000\n" + "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" + "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" + "Language-Team: LANGUAGE <LL@li.org>\n" ++"Language: \n" + "MIME-Version: 1.0\n" + "Content-Type: text/plain; charset=CHARSET\n" +-"Content-Transfer-Encoding: ENCODING\n" ++"Content-Transfer-Encoding: 8bit\n" + + #: src/lsz.c:228 + msgid "io_mode(,2) in rbsb.c not implemented\n" + msgstr "" + +-#: src/lrz.c:201 src/lsz.c:230 ++#: src/lsz.c:230 src/lrz.c:201 + #, c-format + msgid "caught signal %d; exiting" + msgstr "" +@@ -45,7 +48,7 @@ msgstr "" + msgid "framelength out of range 32..%ld" + msgstr "" + +-#: src/lrz.c:323 src/lsz.c:450 ++#: src/lsz.c:450 src/lrz.c:323 + msgid "min_bps" + msgstr "" + +@@ -53,65 +56,65 @@ msgstr "" + msgid "min_bps must be >= 0" + msgstr "" + +-#: src/lrz.c:329 src/lsz.c:458 ++#: src/lsz.c:458 src/lrz.c:329 + msgid "min_bps_time" + msgstr "" + +-#: src/lrz.c:331 src/lsz.c:460 ++#: src/lsz.c:460 src/lrz.c:331 + msgid "min_bps_time must be > 1" + msgstr "" + +-#: src/lrz.c:347 src/lsz.c:484 ++#: src/lsz.c:484 src/lrz.c:347 + msgid "hour to large (0..23)" + msgstr "" + +-#: src/lrz.c:349 src/lsz.c:486 ++#: src/lsz.c:486 src/lrz.c:349 + msgid "unparsable stop time\n" + msgstr "" + +-#: src/lrz.c:353 src/lsz.c:490 ++#: src/lsz.c:490 src/lrz.c:353 + msgid "minute to large (0..59)" + msgstr "" + +-#: src/lrz.c:363 src/lrz.c:370 src/lsz.c:500 src/lsz.c:507 ++#: src/lsz.c:500 src/lsz.c:507 src/lrz.c:363 src/lrz.c:370 + msgid "stop time to small" + msgstr "" + +-#: src/lrz.c:368 src/lsz.c:505 ++#: src/lsz.c:505 src/lrz.c:368 + msgid "stop-at" + msgstr "" + +-#: src/lrz.c:399 src/lsz.c:516 ++#: src/lsz.c:516 src/lrz.c:399 + msgid "timeout" + msgstr "" + +-#: src/lrz.c:401 src/lsz.c:518 ++#: src/lsz.c:518 src/lrz.c:401 + msgid "timeout out of range 10..1000" + msgstr "" + +-#: src/lrz.c:417 src/lsz.c:526 ++#: src/lsz.c:526 src/lrz.c:417 + msgid "security violation: can't do that under restricted shell\n" + msgstr "" + +-#: src/lrz.c:407 src/lsz.c:533 ++#: src/lsz.c:533 src/lrz.c:407 + msgid "window size" + msgstr "" + +-#: src/lrz.c:432 src/lrz.c:439 src/lsz.c:556 src/lsz.c:563 ++#: src/lsz.c:556 src/lsz.c:563 src/lrz.c:432 src/lrz.c:439 + msgid "cannot turnoff syslog" + msgstr "" + +-#: src/lrz.c:454 src/lsz.c:571 ++#: src/lsz.c:571 src/lrz.c:454 + msgid "startup delay" + msgstr "" + ++#: src/lsz.c:583 src/lsz.c:692 src/lsz.c:831 src/lsz.c:1080 src/zreadline.c:127 + #: src/lrz.c:470 src/lrz.c:755 src/lrz.c:1117 src/lrz.c:1243 src/lrz.c:1300 +-#: src/lrz.c:1317 src/lrz.c:1332 src/lrz.c:1431 src/lsz.c:583 src/lsz.c:692 +-#: src/lsz.c:831 src/lsz.c:1080 src/zreadline.c:127 ++#: src/lrz.c:1317 src/lrz.c:1332 src/lrz.c:1431 + msgid "out of memory" + msgstr "" + +-#: src/lrz.c:480 src/lsz.c:595 ++#: src/lsz.c:595 src/lrz.c:480 + msgid "this program was never intended to be used setuid\n" + msgstr "" + +@@ -120,14 +123,15 @@ msgid "need at least one file to send" + msgstr "" + + #: src/lsz.c:628 ++#, c-format + msgid "Can't send command in restricted mode\n" + msgstr "" + +-#: src/lrz.c:524 src/lsz.c:655 ++#: src/lsz.c:655 src/lrz.c:524 + msgid "hostname too long\n" + msgstr "" + +-#: src/lrz.c:539 src/lsz.c:670 ++#: src/lsz.c:670 src/lrz.c:539 + msgid "illegal server address\n" + msgstr "" + +@@ -135,11 +139,11 @@ msgstr "" + msgid "can read only one file from stdin" + msgstr "" + +-#: src/lrz.c:571 src/lsz.c:806 ++#: src/lsz.c:806 src/lrz.c:571 + msgid "Transfer incomplete\n" + msgstr "" + +-#: src/lrz.c:573 src/lsz.c:808 ++#: src/lsz.c:808 src/lrz.c:573 + msgid "Transfer complete\n" + msgstr "" + +@@ -199,7 +203,7 @@ msgstr "" + msgid "security violation: not allowed to upload from %s" + msgstr "" + +-#: src/lrz.c:1392 src/lsz.c:1046 ++#: src/lsz.c:1046 src/lrz.c:1392 + #, c-format + msgid "cannot open %s" + msgstr "" +@@ -290,12 +294,12 @@ msgstr "" + msgid "Retry Count Exceeded" + msgstr "" + +-#: src/lrz.c:593 src/lsz.c:1521 ++#: src/lsz.c:1521 src/lrz.c:593 + #, c-format + msgid "Try `%s --help' for more information.\n" + msgstr "" + +-#: src/lrz.c:598 src/lsz.c:1526 ++#: src/lsz.c:1526 src/lrz.c:598 + #, c-format + msgid "%s version %s\n" + msgstr "" +@@ -314,7 +318,7 @@ msgstr "" + msgid "Send file(s) with ZMODEM/YMODEM/XMODEM protocol\n" + msgstr "" + +-#: src/lrz.c:604 src/lsz.c:1534 ++#: src/lsz.c:1534 src/lrz.c:604 + msgid "" + " (X) = option applies to XMODEM only\n" + " (Y) = option applies to YMODEM only\n" +@@ -378,7 +382,7 @@ msgstr "" + msgid "got ZRQINIT" + msgstr "" + +-#: src/lrz.c:1074 src/lrz.c:1787 src/lsz.c:1792 ++#: src/lsz.c:1792 src/lrz.c:1074 src/lrz.c:1787 + msgid "got ZCAN" + msgstr "" + +@@ -438,6 +442,10 @@ msgid "" + "countem: Total %d %ld\n" + msgstr "" + ++#: src/zm.c:91 ++msgid "Bad CRC" ++msgstr "" ++ + #: src/zm.c:244 + #, c-format + msgid "Bad escape sequence %x" +@@ -447,7 +455,7 @@ msgstr "" + msgid "Sender Canceled" + msgstr "" + +-#: src/lrz.c:997 src/zm.c:585 src/zm.c:644 ++#: src/zm.c:585 src/zm.c:644 src/lrz.c:997 + msgid "TIMEOUT" + msgstr "" + +@@ -678,13 +686,11 @@ msgstr "" + msgid "Skipped" + msgstr "" + +-#. too bad + #: src/lrz.c:2064 + #, c-format + msgid "rzfile: bps rate %ld below min %ld" + msgstr "" + +-#. too bad + #: src/lrz.c:2079 + msgid "rzfile: reached stop time" + msgstr "" +diff -uprN clean/lrzsz-0.12.20/po/Makefile.in.in lrzsz-0.12.20/po/Makefile.in.in +--- clean/lrzsz-0.12.20/po/Makefile.in.in 1998-04-26 14:22:40.000000000 +0100 ++++ lrzsz-0.12.20/po/Makefile.in.in 2019-11-25 18:21:17.000000000 +0000 +@@ -1,14 +1,20 @@ +-# Makefile for program source directory in GNU NLS utilities package. +-# Copyright (C) 1995, 1996, 1997 by Ulrich Drepper <drepper@gnu.ai.mit.edu> ++# Makefile for PO directory in any package using GNU gettext. ++# Copyright (C) 1995-2000 Ulrich Drepper <drepper@gnu.ai.mit.edu> ++# Copyright (C) 2000-2019 Free Software Foundation, Inc. + # +-# This file file be copied and used freely without restrictions. It can +-# be used in projects which are not available under the GNU Public License +-# but which still want to provide support for the GNU gettext functionality. +-# Please note that the actual code is *not* freely available. ++# Copying and distribution of this file, with or without modification, ++# are permitted in any medium without royalty provided the copyright ++# notice and this notice are preserved. This file is offered as-is, ++# without any warranty. ++# ++# Origin: gettext-0.20 ++GETTEXT_MACRO_VERSION = 0.20 + + PACKAGE = @PACKAGE@ + VERSION = @VERSION@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + ++SED = @SED@ + SHELL = /bin/sh + @SET_MAKE@ + +@@ -18,229 +24,479 @@ VPATH = @srcdir@ + + prefix = @prefix@ + exec_prefix = @exec_prefix@ +-datadir = $(prefix)/@DATADIRNAME@ +-localedir = $(datadir)/locale +-gnulocaledir = $(prefix)/share/locale +-gettextsrcdir = $(prefix)/share/gettext/po +-subdir = po ++datarootdir = @datarootdir@ ++datadir = @datadir@ ++localedir = @localedir@ ++gettextsrcdir = $(datadir)/gettext/po + + INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ +-MKINSTALLDIRS = $(top_srcdir)/@MKINSTALLDIRS@ +- +-CC = @CC@ +-GENCAT = @GENCAT@ +-GMSGFMT = PATH=../src:$$PATH @GMSGFMT@ +-MSGFMT = @MSGFMT@ +-XGETTEXT = PATH=../src:$$PATH @XGETTEXT@ +-MSGMERGE = PATH=../src:$$PATH msgmerge +- +-DEFS = @DEFS@ +-CFLAGS = @CFLAGS@ +-CPPFLAGS = @CPPFLAGS@ +- +-INCLUDES = -I.. -I$(top_srcdir)/intl + +-COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS) ++# We use $(mkdir_p). ++# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as ++# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, ++# @install_sh@ does not start with $(SHELL), so we add it. ++# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined ++# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake ++# versions, $(mkinstalldirs) and $(install_sh) are unused. ++mkinstalldirs = $(SHELL) @install_sh@ -d ++install_sh = $(SHELL) @install_sh@ ++MKDIR_P = @MKDIR_P@ ++mkdir_p = @mkdir_p@ ++ ++# When building gettext-tools, we prefer to use the built programs ++# rather than installed programs. However, we can't do that when we ++# are cross compiling. ++CROSS_COMPILING = @CROSS_COMPILING@ ++ ++GMSGFMT_ = @GMSGFMT@ ++GMSGFMT_no = @GMSGFMT@ ++GMSGFMT_yes = @GMSGFMT_015@ ++GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) ++XGETTEXT_ = @XGETTEXT@ ++XGETTEXT_no = @XGETTEXT@ ++XGETTEXT_yes = @XGETTEXT_015@ ++XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) ++MSGMERGE = @MSGMERGE@ ++MSGMERGE_UPDATE = @MSGMERGE@ --update ++MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@ ++MSGINIT = msginit ++MSGCONV = msgconv ++MSGFILTER = msgfilter + +-SOURCES = cat-id-tbl.c + POFILES = @POFILES@ + GMOFILES = @GMOFILES@ +-DISTFILES = ChangeLog Makefile.in.in POTFILES.in $(PACKAGE).pot \ +-stamp-cat-id $(POFILES) $(GMOFILES) $(SOURCES) ++UPDATEPOFILES = @UPDATEPOFILES@ ++DUMMYPOFILES = @DUMMYPOFILES@ ++DISTFILES.common = Makefile.in.in remove-potcdate.sin \ ++$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) ++DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ ++$(POFILES) $(GMOFILES) \ ++$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) + + POTFILES = \ + + CATALOGS = @CATALOGS@ +-CATOBJEXT = @CATOBJEXT@ +-INSTOBJEXT = @INSTOBJEXT@ + +-.SUFFIXES: +-.SUFFIXES: .c .o .po .pox .gmo .mo .msg .cat +- +-.c.o: +- $(COMPILE) $< ++POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot ++POFILESDEPS_yes = $(POFILESDEPS_) ++POFILESDEPS_no = ++POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT)) ++ ++DISTFILESDEPS_ = update-po ++DISTFILESDEPS_yes = $(DISTFILESDEPS_) ++DISTFILESDEPS_no = ++DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO)) + +-.po.pox: +- $(MAKE) $(PACKAGE).pot +- $(MSGMERGE) $< $(srcdir)/$(PACKAGE).pot -o $*.pox ++# Makevars gets inserted here. (Don't remove this line!) + +-.po.mo: +- $(MSGFMT) -o $@ $< +- +-.po.gmo: +- file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \ +- && rm -f $$file && $(GMSGFMT) -o $$file $< ++.SUFFIXES: ++.SUFFIXES: .po .gmo .sed .sin .nop .po-create .po-update + +-.po.cat: +- sed -f ../intl/po2msg.sed < $< > $*.msg \ +- && rm -f $@ && $(GENCAT) $@ $*.msg ++# The .pot file, stamp-po, .po files, and .gmo files appear in release tarballs. ++# The GNU Coding Standards say in ++# <https://www.gnu.org/prep/standards/html_node/Makefile-Basics.html>: ++# "GNU distributions usually contain some files which are not source files ++# ... . Since these files normally appear in the source directory, they ++# should always appear in the source directory, not in the build directory. ++# So Makefile rules to update them should put the updated files in the ++# source directory." ++# Therefore we put these files in the source directory, not the build directory. ++ ++# During .po -> .gmo conversion, take into account the most recent changes to ++# the .pot file. This eliminates the need to update the .po files when the ++# .pot file has changed, which would be troublesome if the .po files are put ++# under version control. ++.po.gmo: $(srcdir)/$(DOMAIN).pot ++ @lang=`echo $* | sed -e 's,.*/,,'`; \ ++ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ ++ echo "$${cdcmd}rm -f $${lang}.gmo && $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.1po && rm -f $${lang}.1po"; \ ++ cd $(srcdir) && \ ++ rm -f $${lang}.gmo && \ ++ $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && \ ++ $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.1po && \ ++ mv t-$${lang}.gmo $${lang}.gmo && \ ++ rm -f $${lang}.1po ++ ++.sin.sed: ++ sed -e '/^#/d' $< > t-$@ ++ mv t-$@ $@ + + + all: all-@USE_NLS@ + +-all-yes: cat-id-tbl.c $(CATALOGS) ++all-yes: $(srcdir)/stamp-po + all-no: + +-$(srcdir)/$(PACKAGE).pot: $(POTFILES) +- $(XGETTEXT) --default-domain=$(PACKAGE) --directory=$(top_srcdir) \ +- --add-comments --keyword=_ --keyword=N_ \ +- --files-from=$(srcdir)/POTFILES.in +- rm -f $(srcdir)/$(PACKAGE).pot +- mv $(PACKAGE).po $(srcdir)/$(PACKAGE).pot +- +-$(srcdir)/cat-id-tbl.c: stamp-cat-id; @: +-$(srcdir)/stamp-cat-id: $(PACKAGE).pot +- rm -f cat-id-tbl.tmp +- sed -f ../intl/po2tbl.sed $(srcdir)/$(PACKAGE).pot \ +- | sed -e "s/@PACKAGE NAME@/$(PACKAGE)/" > cat-id-tbl.tmp +- if cmp -s cat-id-tbl.tmp $(srcdir)/cat-id-tbl.c; then \ +- rm cat-id-tbl.tmp; \ +- else \ +- echo cat-id-tbl.c changed; \ +- rm -f $(srcdir)/cat-id-tbl.c; \ +- mv cat-id-tbl.tmp $(srcdir)/cat-id-tbl.c; \ ++# Ensure that the gettext macros and this Makefile.in.in are in sync. ++CHECK_MACRO_VERSION = \ ++ test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \ ++ || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \ ++ exit 1; \ ++ } ++ ++# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no ++# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because ++# we don't want to bother translators with empty POT files). We assume that ++# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. ++# In this case, $(srcdir)/stamp-po is a nop (i.e. a phony target). ++ ++# $(srcdir)/stamp-po is a timestamp denoting the last time at which the CATALOGS ++# have been loosely updated. Its purpose is that when a developer or translator ++# checks out the package from a version control system, and the $(DOMAIN).pot ++# file is not under version control, "make" will update the $(DOMAIN).pot and ++# the $(CATALOGS), but subsequent invocations of "make" will do nothing. This ++# timestamp would not be necessary if updating the $(CATALOGS) would always ++# touch them; however, the rule for $(POFILES) has been designed to not touch ++# files that don't need to be changed. ++$(srcdir)/stamp-po: $(srcdir)/$(DOMAIN).pot ++ @$(CHECK_MACRO_VERSION) ++ test ! -f $(srcdir)/$(DOMAIN).pot || \ ++ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) ++ @test ! -f $(srcdir)/$(DOMAIN).pot || { \ ++ echo "touch $(srcdir)/stamp-po" && \ ++ echo timestamp > $(srcdir)/stamp-poT && \ ++ mv $(srcdir)/stamp-poT $(srcdir)/stamp-po; \ ++ } ++ ++# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', ++# otherwise packages like GCC can not be built if only parts of the source ++# have been downloaded. ++ ++# This target rebuilds $(DOMAIN).pot; it is an expensive operation. ++# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. ++# The determination of whether the package xyz is a GNU one is based on the ++# heuristic whether some file in the top level directory mentions "GNU xyz". ++# If GNU 'find' is available, we avoid grepping through monster files. ++$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed ++ package_gnu="$(PACKAGE_GNU)"; \ ++ test -n "$$package_gnu" || { \ ++ if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \ ++ LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep -i 'GNU @PACKAGE@' /dev/null '{}' ';' 2>/dev/null; \ ++ else \ ++ LC_ALL=C grep -i 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \ ++ fi; \ ++ } | grep -v 'libtool:' >/dev/null; then \ ++ package_gnu=yes; \ ++ else \ ++ package_gnu=no; \ ++ fi; \ ++ }; \ ++ if test "$$package_gnu" = "yes"; then \ ++ package_prefix='GNU '; \ ++ else \ ++ package_prefix=''; \ ++ fi; \ ++ if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ ++ msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ ++ else \ ++ msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ ++ fi; \ ++ case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ ++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ ++ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ ++ --add-comments=TRANSLATORS: \ ++ --files-from=$(srcdir)/POTFILES.in \ ++ --copyright-holder='$(COPYRIGHT_HOLDER)' \ ++ --msgid-bugs-address="$$msgid_bugs_address" \ ++ $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ ++ ;; \ ++ *) \ ++ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ ++ --add-comments=TRANSLATORS: \ ++ --files-from=$(srcdir)/POTFILES.in \ ++ --copyright-holder='$(COPYRIGHT_HOLDER)' \ ++ --package-name="$${package_prefix}@PACKAGE@" \ ++ --package-version='@VERSION@' \ ++ --msgid-bugs-address="$$msgid_bugs_address" \ ++ $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ ++ ;; \ ++ esac ++ test ! -f $(DOMAIN).po || { \ ++ if test -f $(srcdir)/$(DOMAIN).pot-header; then \ ++ sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \ ++ cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po && \ ++ rm -f $(DOMAIN).1po \ ++ || exit 1; \ ++ fi; \ ++ if test -f $(srcdir)/$(DOMAIN).pot; then \ ++ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ ++ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ ++ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ ++ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ ++ else \ ++ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ ++ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ ++ fi; \ ++ else \ ++ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ ++ fi; \ ++ } ++ ++# This rule has no dependencies: we don't need to update $(DOMAIN).pot at ++# every "make" invocation, only create it when it is missing. ++# Only "make $(DOMAIN).pot-update" or "make dist" will force an update. ++$(srcdir)/$(DOMAIN).pot: ++ $(MAKE) $(DOMAIN).pot-update ++ ++# This target rebuilds a PO file if $(DOMAIN).pot has changed. ++# Note that a PO file is not touched if it doesn't need to be changed. ++$(POFILES): $(POFILESDEPS) ++ @test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot ++ @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ ++ if test -f "$(srcdir)/$${lang}.po"; then \ ++ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ ++ echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot"; \ ++ cd $(srcdir) \ ++ && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ ++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \ ++ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \ ++ 0.1[6-7] | 0.1[6-7].*) \ ++ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --previous $${lang}.po $(DOMAIN).pot;; \ ++ *) \ ++ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot;; \ ++ esac; \ ++ }; \ ++ else \ ++ $(MAKE) $${lang}.po-create; \ + fi +- cd $(srcdir) && rm -f stamp-cat-id && echo timestamp > stamp-cat-id + + + install: install-exec install-data + install-exec: + install-data: install-data-@USE_NLS@ +-install-data-no: all +-install-data-yes: all +- if test -r $(MKINSTALLDIRS); then \ +- $(MKINSTALLDIRS) $(datadir); \ ++ if test "$(PACKAGE)" = "gettext-tools"; then \ ++ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ ++ for file in $(DISTFILES.common) Makevars.template; do \ ++ $(INSTALL_DATA) $(srcdir)/$$file \ ++ $(DESTDIR)$(gettextsrcdir)/$$file; \ ++ done; \ ++ for file in Makevars; do \ ++ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ ++ done; \ + else \ +- $(top_srcdir)/mkinstalldirs $(datadir); \ ++ : ; \ + fi ++install-data-no: all ++install-data-yes: all + @catalogs='$(CATALOGS)'; \ + for cat in $$catalogs; do \ + cat=`basename $$cat`; \ +- case "$$cat" in \ +- *.gmo) destdir=$(gnulocaledir);; \ +- *) destdir=$(localedir);; \ +- esac; \ +- lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \ +- dir=$$destdir/$$lang/LC_MESSAGES; \ +- if test -r $(MKINSTALLDIRS); then \ +- $(MKINSTALLDIRS) $$dir; \ +- else \ +- $(top_srcdir)/mkinstalldirs $$dir; \ +- fi; \ +- if test -r $$cat; then \ +- $(INSTALL_DATA) $$cat $$dir/$(PACKAGE)$(INSTOBJEXT); \ +- echo "installing $$cat as $$dir/$(PACKAGE)$(INSTOBJEXT)"; \ +- else \ +- $(INSTALL_DATA) $(srcdir)/$$cat $$dir/$(PACKAGE)$(INSTOBJEXT); \ +- echo "installing $(srcdir)/$$cat as" \ +- "$$dir/$(PACKAGE)$(INSTOBJEXT)"; \ +- fi; \ +- if test -r $$cat.m; then \ +- $(INSTALL_DATA) $$cat.m $$dir/$(PACKAGE)$(INSTOBJEXT).m; \ +- echo "installing $$cat.m as $$dir/$(PACKAGE)$(INSTOBJEXT).m"; \ +- else \ +- if test -r $(srcdir)/$$cat.m ; then \ +- $(INSTALL_DATA) $(srcdir)/$$cat.m \ +- $$dir/$(PACKAGE)$(INSTOBJEXT).m; \ +- echo "installing $(srcdir)/$$cat as" \ +- "$$dir/$(PACKAGE)$(INSTOBJEXT).m"; \ +- else \ +- true; \ ++ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ ++ dir=$(localedir)/$$lang/LC_MESSAGES; \ ++ $(mkdir_p) $(DESTDIR)$$dir; \ ++ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ ++ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ ++ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ ++ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ ++ if test -n "$$lc"; then \ ++ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ ++ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ ++ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ ++ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ ++ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ ++ for file in *; do \ ++ if test -f $$file; then \ ++ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ ++ fi; \ ++ done); \ ++ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ ++ else \ ++ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ ++ :; \ ++ else \ ++ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ ++ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ ++ fi; \ ++ fi; \ ++ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ ++ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ ++ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ ++ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ ++ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ + fi; \ +- fi; \ ++ done; \ + done +- if test "$(PACKAGE)" = "gettext"; then \ +- if test -r $(MKINSTALLDIRS); then \ +- $(MKINSTALLDIRS) $(gettextsrcdir); \ +- else \ +- $(top_srcdir)/mkinstalldirs $(gettextsrcdir); \ +- fi; \ +- $(INSTALL_DATA) $(srcdir)/Makefile.in.in \ +- $(gettextsrcdir)/Makefile.in.in; \ ++ ++install-strip: install ++ ++installdirs: installdirs-exec installdirs-data ++installdirs-exec: ++installdirs-data: installdirs-data-@USE_NLS@ ++ if test "$(PACKAGE)" = "gettext-tools"; then \ ++ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ + else \ + : ; \ + fi ++installdirs-data-no: ++installdirs-data-yes: ++ @catalogs='$(CATALOGS)'; \ ++ for cat in $$catalogs; do \ ++ cat=`basename $$cat`; \ ++ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ ++ dir=$(localedir)/$$lang/LC_MESSAGES; \ ++ $(mkdir_p) $(DESTDIR)$$dir; \ ++ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ ++ if test -n "$$lc"; then \ ++ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ ++ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ ++ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ ++ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ ++ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ ++ for file in *; do \ ++ if test -f $$file; then \ ++ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ ++ fi; \ ++ done); \ ++ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ ++ else \ ++ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ ++ :; \ ++ else \ ++ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ ++ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ ++ fi; \ ++ fi; \ ++ fi; \ ++ done; \ ++ done + + # Define this as empty until I found a useful application. + installcheck: + +-uninstall: ++uninstall: uninstall-exec uninstall-data ++uninstall-exec: ++uninstall-data: uninstall-data-@USE_NLS@ ++ if test "$(PACKAGE)" = "gettext-tools"; then \ ++ for file in $(DISTFILES.common) Makevars.template; do \ ++ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ ++ done; \ ++ else \ ++ : ; \ ++ fi ++uninstall-data-no: ++uninstall-data-yes: + catalogs='$(CATALOGS)'; \ + for cat in $$catalogs; do \ + cat=`basename $$cat`; \ +- lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \ +- rm -f $(localedir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT); \ +- rm -f $(localedir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT).m; \ +- rm -f $(gnulocaledir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT); \ +- rm -f $(gnulocaledir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT).m; \ ++ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ ++ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ ++ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ ++ done; \ + done +- rm -f $(gettextsrcdir)/po-Makefile.in.in + + check: all + +-cat-id-tbl.o: ../intl/libgettext.h ++info dvi ps pdf html tags TAGS ctags CTAGS ID: + +-dvi info tags TAGS ID: ++install-dvi install-ps install-pdf install-html: + + mostlyclean: +- rm -f core core.* *.pox $(PACKAGE).po *.old.po cat-id-tbl.tmp ++ rm -f remove-potcdate.sed ++ rm -f $(srcdir)/stamp-poT ++ rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po + rm -fr *.o + + clean: mostlyclean + + distclean: clean +- rm -f Makefile Makefile.in POTFILES *.mo *.msg *.cat *.cat.m ++ rm -f Makefile Makefile.in POTFILES + + maintainer-clean: distclean + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." +- rm -f $(GMOFILES) ++ rm -f $(srcdir)/$(DOMAIN).pot $(srcdir)/stamp-po $(GMOFILES) + +-distdir = ../$(PACKAGE)-$(VERSION)/$(subdir) +-dist distdir: update-po $(DISTFILES) ++distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) ++dist distdir: ++ test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS) ++ @$(MAKE) dist2 ++# This is a separate target because 'update-po' must be executed before. ++dist2: $(srcdir)/stamp-po $(DISTFILES) + dists="$(DISTFILES)"; \ ++ if test "$(PACKAGE)" = "gettext-tools"; then \ ++ dists="$$dists Makevars.template"; \ ++ fi; \ ++ if test -f $(srcdir)/$(DOMAIN).pot; then \ ++ dists="$$dists $(DOMAIN).pot stamp-po"; \ ++ fi; \ ++ if test -f $(srcdir)/ChangeLog; then \ ++ dists="$$dists ChangeLog"; \ ++ fi; \ ++ for i in 0 1 2 3 4 5 6 7 8 9; do \ ++ if test -f $(srcdir)/ChangeLog.$$i; then \ ++ dists="$$dists ChangeLog.$$i"; \ ++ fi; \ ++ done; \ ++ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ + for file in $$dists; do \ +- ln $(srcdir)/$$file $(distdir) 2> /dev/null \ +- || cp -p $(srcdir)/$$file $(distdir); \ ++ if test -f $$file; then \ ++ cp -p $$file $(distdir) || exit 1; \ ++ else \ ++ cp -p $(srcdir)/$$file $(distdir) || exit 1; \ ++ fi; \ + done + + update-po: Makefile +- $(MAKE) $(PACKAGE).pot +- PATH=`pwd`/../src:$$PATH; \ ++ $(MAKE) $(DOMAIN).pot-update ++ test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) ++ $(MAKE) update-gmo ++ ++# General rule for creating PO files. ++ ++.nop.po-create: ++ @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ ++ echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ ++ exit 1 ++ ++# General rule for updating PO files. ++ ++.nop.po-update: ++ @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ ++ if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \ ++ tmpdir=`pwd`; \ ++ echo "$$lang:"; \ ++ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ ++ echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ + cd $(srcdir); \ +- catalogs='$(CATALOGS)'; \ +- for cat in $$catalogs; do \ +- cat=`basename $$cat`; \ +- lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \ +- mv $$lang.po $$lang.old.po; \ +- echo "$$lang:"; \ +- if $(MSGMERGE) $$lang.old.po $(PACKAGE).pot -o $$lang.po; then \ +- rm -f $$lang.old.po; \ ++ if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ ++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \ ++ $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ ++ 0.1[6-7] | 0.1[6-7].*) \ ++ $(MSGMERGE) $(MSGMERGE_OPTIONS) --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ ++ *) \ ++ $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ ++ esac; \ ++ }; then \ ++ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ ++ rm -f $$tmpdir/$$lang.new.po; \ + else \ +- echo "msgmerge for $$cat failed!"; \ +- rm -f $$lang.po; \ +- mv $$lang.old.po $$lang.po; \ ++ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ ++ :; \ ++ else \ ++ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ ++ exit 1; \ ++ fi; \ + fi; \ +- done ++ else \ ++ echo "msgmerge for $$lang.po failed!" 1>&2; \ ++ rm -f $$tmpdir/$$lang.new.po; \ ++ fi + +-POTFILES: POTFILES.in +- ( if test 'x$(srcdir)' != 'x.'; then \ +- posrcprefix='$(top_srcdir)/'; \ +- else \ +- posrcprefix="../"; \ +- fi; \ +- rm -f $@-t $@ \ +- && (sed -e '/^#/d' -e '/^[ ]*$$/d' \ +- -e "s@.*@ $$posrcprefix& \\\\@" < $(srcdir)/$@.in \ +- | sed -e '$$s/\\$$//') > $@-t \ +- && chmod a-w $@-t \ +- && mv $@-t $@ ) +- +-Makefile: Makefile.in.in ../config.status POTFILES +- cd .. \ +- && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \ +- $(SHELL) ./config.status ++$(DUMMYPOFILES): ++ ++update-gmo: Makefile $(GMOFILES) ++ @: ++ ++# Recreate Makefile by invoking config.status. Explicitly invoke the shell, ++# because execution permission bits may not work on the current file system. ++# Use @SHELL@, which is the shell determined by autoconf for the use by its ++# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient. ++Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@ ++ cd $(top_builddir) \ ++ && @SHELL@ ./config.status $(subdir)/$@.in po-directories ++ ++force: + + # Tell versions [3.59,3.63) of GNU make not to export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -uprN clean/lrzsz-0.12.20/po/Makevars lrzsz-0.12.20/po/Makevars +--- clean/lrzsz-0.12.20/po/Makevars 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/po/Makevars 2019-11-25 18:09:52.000000000 +0000 +@@ -0,0 +1,78 @@ ++# Makefile variables for PO directory in any package using GNU gettext. ++ ++# Usually the message domain is the same as the package name. ++DOMAIN = $(PACKAGE) ++ ++# These two variables depend on the location of this directory. ++subdir = po ++top_builddir = .. ++ ++# These options get passed to xgettext. ++XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ ++ ++# This is the copyright holder that gets inserted into the header of the ++# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding ++# package. (Note that the msgstr strings, extracted from the package's ++# sources, belong to the copyright holder of the package.) Translators are ++# expected to transfer the copyright for their translations to this person ++# or entity, or to disclaim their copyright. The empty string stands for ++# the public domain; in this case the translators are expected to disclaim ++# their copyright. ++COPYRIGHT_HOLDER = Free Software Foundation, Inc. ++ ++# This tells whether or not to prepend "GNU " prefix to the package ++# name that gets inserted into the header of the $(DOMAIN).pot file. ++# Possible values are "yes", "no", or empty. If it is empty, try to ++# detect it automatically by scanning the files in $(top_srcdir) for ++# "GNU packagename" string. ++PACKAGE_GNU = ++ ++# This is the email address or URL to which the translators shall report ++# bugs in the untranslated strings: ++# - Strings which are not entire sentences, see the maintainer guidelines ++# in the GNU gettext documentation, section 'Preparing Strings'. ++# - Strings which use unclear terms or require additional context to be ++# understood. ++# - Strings which make invalid assumptions about notation of date, time or ++# money. ++# - Pluralisation problems. ++# - Incorrect English spelling. ++# - Incorrect formatting. ++# It can be your email address, or a mailing list address where translators ++# can write to without being subscribed, or the URL of a web page through ++# which the translators can contact you. ++MSGID_BUGS_ADDRESS = ++ ++# This is the list of locale categories, beyond LC_MESSAGES, for which the ++# message catalogs shall be used. It is usually empty. ++EXTRA_LOCALE_CATEGORIES = ++ ++# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt' ++# context. Possible values are "yes" and "no". Set this to yes if the ++# package uses functions taking also a message context, like pgettext(), or ++# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument. ++USE_MSGCTXT = no ++ ++# These options get passed to msgmerge. ++# Useful options are in particular: ++# --previous to keep previous msgids of translated messages, ++# --quiet to reduce the verbosity. ++MSGMERGE_OPTIONS = ++ ++# These options get passed to msginit. ++# If you want to disable line wrapping when writing PO files, add ++# --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and ++# MSGINIT_OPTIONS. ++MSGINIT_OPTIONS = ++ ++# This tells whether or not to regenerate a PO file when $(DOMAIN).pot ++# has changed. Possible values are "yes" and "no". Set this to no if ++# the POT file is checked in the repository and the version control ++# program ignores timestamps. ++PO_DEPENDS_ON_POT = yes ++ ++# This tells whether or not to forcibly update $(DOMAIN).pot and ++# regenerate PO files on "make dist". Possible values are "yes" and ++# "no". Set this to no if the POT file and PO files are maintained ++# externally. ++DIST_DEPENDS_ON_UPDATE_PO = yes +diff -uprN clean/lrzsz-0.12.20/po/quot.sed lrzsz-0.12.20/po/quot.sed +--- clean/lrzsz-0.12.20/po/quot.sed 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/po/quot.sed 2019-11-25 18:21:17.000000000 +0000 +@@ -0,0 +1,6 @@ ++s/"\([^"]*\)"/“\1â€/g ++s/`\([^`']*\)'/‘\1’/g ++s/ '\([^`']*\)' / ‘\1’ /g ++s/ '\([^`']*\)'$/ ‘\1’/g ++s/^'\([^`']*\)' /‘\1’ /g ++s/“â€/""/g +diff -uprN clean/lrzsz-0.12.20/po/remove-potcdate.sin lrzsz-0.12.20/po/remove-potcdate.sin +--- clean/lrzsz-0.12.20/po/remove-potcdate.sin 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/po/remove-potcdate.sin 2019-11-25 18:21:17.000000000 +0000 +@@ -0,0 +1,25 @@ ++# Sed script that removes the POT-Creation-Date line in the header entry ++# from a POT file. ++# ++# Copyright (C) 2002 Free Software Foundation, Inc. ++# Copying and distribution of this file, with or without modification, ++# are permitted in any medium without royalty provided the copyright ++# notice and this notice are preserved. This file is offered as-is, ++# without any warranty. ++# ++# The distinction between the first and the following occurrences of the ++# pattern is achieved by looking at the hold space. ++/^"POT-Creation-Date: .*"$/{ ++x ++# Test if the hold space is empty. ++s/P/P/ ++ta ++# Yes it was empty. First occurrence. Remove the line. ++g ++d ++bb ++:a ++# The hold space was nonempty. Following occurrences. Do nothing. ++x ++:b ++} +diff -uprN clean/lrzsz-0.12.20/po/Rules-quot lrzsz-0.12.20/po/Rules-quot +--- clean/lrzsz-0.12.20/po/Rules-quot 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/po/Rules-quot 2019-11-25 18:21:17.000000000 +0000 +@@ -0,0 +1,62 @@ ++# Special Makefile rules for English message catalogs with quotation marks. ++# ++# Copyright (C) 2001-2017 Free Software Foundation, Inc. ++# This file, Rules-quot, and its auxiliary files (listed under ++# DISTFILES.common.extra1) are free software; the Free Software Foundation ++# gives unlimited permission to use, copy, distribute, and modify them. ++ ++DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot ++ ++.SUFFIXES: .insert-header .po-update-en ++ ++en@quot.po-create: ++ $(MAKE) en@quot.po-update ++en@boldquot.po-create: ++ $(MAKE) en@boldquot.po-update ++ ++en@quot.po-update: en@quot.po-update-en ++en@boldquot.po-update: en@boldquot.po-update-en ++ ++.insert-header.po-update-en: ++ @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \ ++ if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ ++ tmpdir=`pwd`; \ ++ echo "$$lang:"; \ ++ ll=`echo $$lang | sed -e 's/@.*//'`; \ ++ LC_ALL=C; export LC_ALL; \ ++ cd $(srcdir); \ ++ if $(MSGINIT) $(MSGINIT_OPTIONS) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null \ ++ | $(SED) -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | \ ++ { case `$(MSGFILTER) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ ++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-8] | 0.1[0-8].*) \ ++ $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed \ ++ ;; \ ++ *) \ ++ $(MSGFILTER) `echo $$lang | sed -e 's/.*@//'` \ ++ ;; \ ++ esac } 2>/dev/null > $$tmpdir/$$lang.new.po \ ++ ; then \ ++ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ ++ rm -f $$tmpdir/$$lang.new.po; \ ++ else \ ++ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ ++ :; \ ++ else \ ++ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ ++ exit 1; \ ++ fi; \ ++ fi; \ ++ else \ ++ echo "creation of $$lang.po failed!" 1>&2; \ ++ rm -f $$tmpdir/$$lang.new.po; \ ++ fi ++ ++en@quot.insert-header: insert-header.sin ++ sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header ++ ++en@boldquot.insert-header: insert-header.sin ++ sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header ++ ++mostlyclean: mostlyclean-quot ++mostlyclean-quot: ++ rm -f *.insert-header +diff -uprN clean/lrzsz-0.12.20/po/stamp-cat-id lrzsz-0.12.20/po/stamp-cat-id +--- clean/lrzsz-0.12.20/po/stamp-cat-id 1998-12-30 07:50:01.000000000 +0000 ++++ lrzsz-0.12.20/po/stamp-cat-id 1970-01-01 01:00:00.000000000 +0100 +@@ -1 +0,0 @@ +-timestamp +diff -uprN clean/lrzsz-0.12.20/po/stamp-po lrzsz-0.12.20/po/stamp-po +--- clean/lrzsz-0.12.20/po/stamp-po 1970-01-01 01:00:00.000000000 +0100 ++++ lrzsz-0.12.20/po/stamp-po 2019-11-26 11:42:09.000000000 +0000 +@@ -0,0 +1 @@ ++timestamp +diff -uprN clean/lrzsz-0.12.20/src/Makefile.am lrzsz-0.12.20/src/Makefile.am +--- clean/lrzsz-0.12.20/src/Makefile.am 1998-12-28 08:38:47.000000000 +0000 ++++ lrzsz-0.12.20/src/Makefile.am 2019-11-25 16:22:49.000000000 +0000 +@@ -2,13 +2,11 @@ bin_PROGRAMS=lrz lsz + lrz_SOURCES=lrz.c timing.c zperr.c zreadline.c crctab.c rbsb.c zm.c protname.c tcp.c lsyslog.c canit.c + lsz_SOURCES=lsz.c timing.c zperr.c zreadline.c crctab.c rbsb.c zm.c protname.c tcp.c lsyslog.c canit.c + noinst_HEADERS = timing.h zglobal.h zmodem.h +-datadir = $(prefix)/@DATADIRNAME@ ++datadir = $(prefix)/share + localedir = $(datadir)/locale +-CFLAGS=@CFLAGS@ + DISTCLEAN_FILES=lrzszbug + +-LDADD = ../lib/libzmodem.a @INTLLIBS@ +-AUTOMAKE_OPTIONS=ansi2knr ++LDADD = ../lib/libzmodem.a @LIBINTL@ + EXTRA_DIST = ansi2knr.1 ansi2knr.c lrzszbug.in + INCLUDES = -I.. -I$(srcdir) -I$(top_srcdir)/src -I../intl -I$(top_srcdir)/lib + #DEFS = -DLOCALEDIR=\"$(localedir)\" -DOS=\"@host_os@\" -DCPU=\"@host_cpu@\" +diff -uprN clean/lrzsz-0.12.20/src/Makefile.in lrzsz-0.12.20/src/Makefile.in +--- clean/lrzsz-0.12.20/src/Makefile.in 1998-12-30 16:31:46.000000000 +0000 ++++ lrzsz-0.12.20/src/Makefile.in 2019-11-26 11:37:46.000000000 +0000 +@@ -1,6 +1,8 @@ +-# Makefile.in generated automatically by automake 1.3 from Makefile.am ++# Makefile.in generated by automake 1.16.1 from Makefile.am. ++# @configure_input@ ++ ++# Copyright (C) 1994-2018 Free Software Foundation, Inc. + +-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -10,362 +12,659 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + ++@SET_MAKE@ + +-SHELL = /bin/sh + +-srcdir = @srcdir@ +-top_srcdir = @top_srcdir@ + VPATH = @srcdir@ +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +- +-bindir = @bindir@ +-sbindir = @sbindir@ +-libexecdir = @libexecdir@ +-sysconfdir = @sysconfdir@ +-sharedstatedir = @sharedstatedir@ +-localstatedir = @localstatedir@ +-libdir = @libdir@ +-infodir = @infodir@ +-mandir = @mandir@ +-includedir = @includedir@ +-oldincludedir = /usr/include +- +-DISTDIR = +- ++am__is_gnu_make = { \ ++ if test -z '$(MAKELEVEL)'; then \ ++ false; \ ++ elif test -n '$(MAKE_HOST)'; then \ ++ true; \ ++ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ ++ true; \ ++ else \ ++ false; \ ++ fi; \ ++} ++am__make_running_with_option = \ ++ case $${target_option-} in \ ++ ?) ;; \ ++ *) echo "am__make_running_with_option: internal error: invalid" \ ++ "target option '$${target_option-}' specified" >&2; \ ++ exit 1;; \ ++ esac; \ ++ has_opt=no; \ ++ sane_makeflags=$$MAKEFLAGS; \ ++ if $(am__is_gnu_make); then \ ++ sane_makeflags=$$MFLAGS; \ ++ else \ ++ case $$MAKEFLAGS in \ ++ *\\[\ \ ]*) \ ++ bs=\\; \ ++ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ ++ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ ++ esac; \ ++ fi; \ ++ skip_next=no; \ ++ strip_trailopt () \ ++ { \ ++ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ ++ }; \ ++ for flg in $$sane_makeflags; do \ ++ test $$skip_next = yes && { skip_next=no; continue; }; \ ++ case $$flg in \ ++ *=*|--*) continue;; \ ++ -*I) strip_trailopt 'I'; skip_next=yes;; \ ++ -*I?*) strip_trailopt 'I';; \ ++ -*O) strip_trailopt 'O'; skip_next=yes;; \ ++ -*O?*) strip_trailopt 'O';; \ ++ -*l) strip_trailopt 'l'; skip_next=yes;; \ ++ -*l?*) strip_trailopt 'l';; \ ++ -[dEDm]) skip_next=yes;; \ ++ -[JT]) skip_next=yes;; \ ++ esac; \ ++ case $$flg in \ ++ *$$target_option*) has_opt=yes; break;; \ ++ esac; \ ++ done; \ ++ test $$has_opt = yes ++am__make_dryrun = (target_option=n; $(am__make_running_with_option)) ++am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) + pkgdatadir = $(datadir)/@PACKAGE@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +- +-top_builddir = .. +- +-ACLOCAL = @ACLOCAL@ +-AUTOCONF = @AUTOCONF@ +-AUTOMAKE = @AUTOMAKE@ +-AUTOHEADER = @AUTOHEADER@ +- +-INSTALL = @INSTALL@ +-INSTALL_PROGRAM = @INSTALL_PROGRAM@ +-INSTALL_DATA = @INSTALL_DATA@ +-INSTALL_SCRIPT = @INSTALL_SCRIPT@ +-transform = @program_transform_name@ +- ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : +-CATALOGS = @CATALOGS@ +-CATOBJEXT = @CATOBJEXT@ ++build_triplet = @build@ ++host_triplet = @host@ ++bin_PROGRAMS = lrz$(EXEEXT) lsz$(EXEEXT) ++subdir = src ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ ++ $(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \ ++ $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ ++ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ ++ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ ++ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \ ++ $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS) \ ++ $(am__DIST_COMMON) ++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ++CONFIG_HEADER = $(top_builddir)/config.h ++CONFIG_CLEAN_FILES = lrzszbug ++CONFIG_CLEAN_VPATH_FILES = ++am__installdirs = "$(DESTDIR)$(bindir)" ++PROGRAMS = $(bin_PROGRAMS) ++am_lrz_OBJECTS = lrz.$(OBJEXT) timing.$(OBJEXT) zperr.$(OBJEXT) \ ++ zreadline.$(OBJEXT) crctab.$(OBJEXT) rbsb.$(OBJEXT) \ ++ zm.$(OBJEXT) protname.$(OBJEXT) tcp.$(OBJEXT) \ ++ lsyslog.$(OBJEXT) canit.$(OBJEXT) ++lrz_OBJECTS = $(am_lrz_OBJECTS) ++lrz_LDADD = $(LDADD) ++lrz_DEPENDENCIES = ../lib/libzmodem.a ++am_lsz_OBJECTS = lsz.$(OBJEXT) timing.$(OBJEXT) zperr.$(OBJEXT) \ ++ zreadline.$(OBJEXT) crctab.$(OBJEXT) rbsb.$(OBJEXT) \ ++ zm.$(OBJEXT) protname.$(OBJEXT) tcp.$(OBJEXT) \ ++ lsyslog.$(OBJEXT) canit.$(OBJEXT) ++lsz_OBJECTS = $(am_lsz_OBJECTS) ++lsz_LDADD = $(LDADD) ++lsz_DEPENDENCIES = ../lib/libzmodem.a ++AM_V_P = $(am__v_P_@AM_V@) ++am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) ++am__v_P_0 = false ++am__v_P_1 = : ++AM_V_GEN = $(am__v_GEN_@AM_V@) ++am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) ++am__v_GEN_0 = @echo " GEN " $@; ++am__v_GEN_1 = ++AM_V_at = $(am__v_at_@AM_V@) ++am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) ++am__v_at_0 = @ ++am__v_at_1 = ++DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) ++depcomp = $(SHELL) $(top_srcdir)/depcomp ++am__maybe_remake_depfiles = depfiles ++am__depfiles_remade = ./$(DEPDIR)/canit.Po ./$(DEPDIR)/crctab.Po \ ++ ./$(DEPDIR)/lrz.Po ./$(DEPDIR)/lsyslog.Po ./$(DEPDIR)/lsz.Po \ ++ ./$(DEPDIR)/protname.Po ./$(DEPDIR)/rbsb.Po ./$(DEPDIR)/tcp.Po \ ++ ./$(DEPDIR)/timing.Po ./$(DEPDIR)/zm.Po ./$(DEPDIR)/zperr.Po \ ++ ./$(DEPDIR)/zreadline.Po ++am__mv = mv -f ++COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ ++ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++AM_V_CC = $(am__v_CC_@AM_V@) ++am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) ++am__v_CC_0 = @echo " CC " $@; ++am__v_CC_1 = ++CCLD = $(CC) ++LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ ++AM_V_CCLD = $(am__v_CCLD_@AM_V@) ++am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) ++am__v_CCLD_0 = @echo " CCLD " $@; ++am__v_CCLD_1 = ++SOURCES = $(lrz_SOURCES) $(lsz_SOURCES) ++DIST_SOURCES = $(lrz_SOURCES) $(lsz_SOURCES) ++am__can_run_installinfo = \ ++ case $$AM_UPDATE_INFO_DIR in \ ++ n|no|NO) false;; \ ++ *) (install-info --version) >/dev/null 2>&1;; \ ++ esac ++HEADERS = $(noinst_HEADERS) ++am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) ++# Read a list of newline-separated strings from the standard input, ++# and print each of them once, without duplicates. Input order is ++# *not* preserved. ++am__uniquify_input = $(AWK) '\ ++ BEGIN { nonempty = 0; } \ ++ { items[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in items) print i; }; } \ ++' ++# Make sure the list of sources is unique. This is necessary because, ++# e.g., the same source file might be shared among _SOURCES variables ++# for different programs/libraries. ++am__define_uniq_tagged_files = \ ++ list='$(am__tagged_files)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | $(am__uniquify_input)` ++ETAGS = etags ++CTAGS = ctags ++am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/lrzszbug.in \ ++ $(top_srcdir)/depcomp $(top_srcdir)/mkinstalldirs ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++ACLOCAL = @ACLOCAL@ ++ALLOCA = @ALLOCA@ ++AMTAR = @AMTAR@ ++AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ + CC = @CC@ ++CCDEPMODE = @CCDEPMODE@ ++CFLAGS = @CFLAGS@ + CPP = @CPP@ +-DATADIRNAME = @DATADIRNAME@ ++CPPFLAGS = @CPPFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++#DEFS = -DLOCALEDIR=\"$(localedir)\" -DOS=\"@host_os@\" -DCPU=\"@host_cpu@\" ++DEFS = -DNFGVMIN @DEFS@ -DLOCALEDIR=\"$(localedir)\" ++DEPDIR = @DEPDIR@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ ++EGREP = @EGREP@ + ENABLE_TIMESYNC = @ENABLE_TIMESYNC@ +-GENCAT = @GENCAT@ +-GMOFILES = @GMOFILES@ ++EXEEXT = @EXEEXT@ ++GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ + GMSGFMT = @GMSGFMT@ +-GT_NO = @GT_NO@ +-GT_YES = @GT_YES@ +-INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@ +-INSTOBJEXT = @INSTOBJEXT@ +-INTLDEPS = @INTLDEPS@ ++GMSGFMT_015 = @GMSGFMT_015@ ++GREP = @GREP@ ++INSTALL = @INSTALL@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INTLLIBS = @INTLLIBS@ +-INTLOBJS = @INTLOBJS@ ++INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ + LDFLAGS = @LDFLAGS@ ++LIBICONV = @LIBICONV@ ++LIBINTL = @LIBINTL@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ ++LTLIBICONV = @LTLIBICONV@ ++LTLIBINTL = @LTLIBINTL@ ++LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKINSTALLDIRS = @MKINSTALLDIRS@ ++MKDIR_P = @MKDIR_P@ + MSGFMT = @MSGFMT@ ++MSGMERGE = @MSGMERGE@ ++MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@ ++OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ +-POFILES = @POFILES@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ + POSUB = @POSUB@ + RANLIB = @RANLIB@ +-U = @U@ +-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ ++SED = @SED@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ ++STRIP = @STRIP@ + USE_NLS = @USE_NLS@ + VERSION = @VERSION@ +-l = @l@ +- +-bin_PROGRAMS=lrz lsz +-lrz_SOURCES=lrz.c timing.c zperr.c zreadline.c crctab.c rbsb.c zm.c protname.c tcp.c lsyslog.c canit.c +-lsz_SOURCES=lsz.c timing.c zperr.c zreadline.c crctab.c rbsb.c zm.c protname.c tcp.c lsyslog.c canit.c +-noinst_HEADERS = timing.h zglobal.h zmodem.h +-datadir = $(prefix)/@DATADIRNAME@ ++XGETTEXT = @XGETTEXT@ ++XGETTEXT_015 = @XGETTEXT_015@ ++XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ ++abs_builddir = @abs_builddir@ ++abs_srcdir = @abs_srcdir@ ++abs_top_builddir = @abs_top_builddir@ ++abs_top_srcdir = @abs_top_srcdir@ ++ac_ct_CC = @ac_ct_CC@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++builddir = @builddir@ ++datadir = $(prefix)/share ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++htmldir = @htmldir@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ + localedir = $(datadir)/locale +-CFLAGS=@CFLAGS@ +-DISTCLEAN_FILES=lrzszbug +- +-LDADD = ../lib/libzmodem.a @INTLLIBS@ +-AUTOMAKE_OPTIONS=ansi2knr ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++psdir = @psdir@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++srcdir = @srcdir@ ++sysconfdir = @sysconfdir@ ++target_alias = @target_alias@ ++top_build_prefix = @top_build_prefix@ ++top_builddir = @top_builddir@ ++top_srcdir = @top_srcdir@ ++lrz_SOURCES = lrz.c timing.c zperr.c zreadline.c crctab.c rbsb.c zm.c protname.c tcp.c lsyslog.c canit.c ++lsz_SOURCES = lsz.c timing.c zperr.c zreadline.c crctab.c rbsb.c zm.c protname.c tcp.c lsyslog.c canit.c ++noinst_HEADERS = timing.h zglobal.h zmodem.h ++DISTCLEAN_FILES = lrzszbug ++LDADD = ../lib/libzmodem.a @LIBINTL@ + EXTRA_DIST = ansi2knr.1 ansi2knr.c lrzszbug.in + INCLUDES = -I.. -I$(srcdir) -I$(top_srcdir)/src -I../intl -I$(top_srcdir)/lib +-#DEFS = -DLOCALEDIR=\"$(localedir)\" -DOS=\"@host_os@\" -DCPU=\"@host_cpu@\" +-DEFS = -DNFGVMIN @DEFS@ -DLOCALEDIR=\"$(localedir)\" +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_HEADER = ../config.h +-CONFIG_CLEAN_FILES = lrzszbug +-PROGRAMS = $(bin_PROGRAMS) ++all: all-am + +-CPPFLAGS = @CPPFLAGS@ +-ANSI2KNR = @ANSI2KNR@ +-lrz_OBJECTS = lrz$U.o timing$U.o zperr$U.o zreadline$U.o crctab$U.o \ +-rbsb$U.o zm$U.o protname$U.o tcp$U.o lsyslog$U.o canit$U.o +-lrz_LDADD = $(LDADD) +-lrz_DEPENDENCIES = ../lib/libzmodem.a +-lrz_LDFLAGS = +-lsz_OBJECTS = lsz$U.o timing$U.o zperr$U.o zreadline$U.o crctab$U.o \ +-rbsb$U.o zm$U.o protname$U.o tcp$U.o lsyslog$U.o canit$U.o +-lsz_LDADD = $(LDADD) +-lsz_DEPENDENCIES = ../lib/libzmodem.a +-lsz_LDFLAGS = +-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) +-LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@ +-HEADERS = $(noinst_HEADERS) ++.SUFFIXES: ++.SUFFIXES: .c .o .obj ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ ++ && { if test -f $@; then exit 0; else break; fi; }; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu src/Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ ++ esac; ++ ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++$(top_srcdir)/configure: $(am__configure_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): ++lrzszbug: $(top_builddir)/config.status $(srcdir)/lrzszbug.in ++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ ++install-binPROGRAMS: $(bin_PROGRAMS) ++ @$(NORMAL_INSTALL) ++ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ ++ if test -n "$$list"; then \ ++ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ ++ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ ++ fi; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p \ ++ ; then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' \ ++ -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ ++ } \ ++ ; done + +-DIST_COMMON = Makefile.am Makefile.in ansi2knr.1 ansi2knr.c lrzszbug.in ++uninstall-binPROGRAMS: ++ @$(NORMAL_UNINSTALL) ++ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' \ ++ `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(bindir)" && rm -f $$files + ++clean-binPROGRAMS: ++ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) + +-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) ++lrz$(EXEEXT): $(lrz_OBJECTS) $(lrz_DEPENDENCIES) $(EXTRA_lrz_DEPENDENCIES) ++ @rm -f lrz$(EXEEXT) ++ $(AM_V_CCLD)$(LINK) $(lrz_OBJECTS) $(lrz_LDADD) $(LIBS) ++ ++lsz$(EXEEXT): $(lsz_OBJECTS) $(lsz_DEPENDENCIES) $(EXTRA_lsz_DEPENDENCIES) ++ @rm -f lsz$(EXEEXT) ++ $(AM_V_CCLD)$(LINK) $(lsz_OBJECTS) $(lsz_LDADD) $(LIBS) + +-TAR = tar +-GZIP = --best +-SOURCES = $(lrz_SOURCES) $(lsz_SOURCES) +-OBJECTS = $(lrz_OBJECTS) $(lsz_OBJECTS) ++mostlyclean-compile: ++ -rm -f *.$(OBJEXT) + +-all: Makefile $(ANSI2KNR) $(PROGRAMS) $(HEADERS) ++distclean-compile: ++ -rm -f *.tab.c + +-.SUFFIXES: +-.SUFFIXES: .S .c .o .s +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/Makefile +- +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +- cd $(top_builddir) \ +- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/canit.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crctab.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lrz.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lsyslog.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lsz.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/protname.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rbsb.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tcp.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/timing.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zm.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zperr.Po@am__quote@ # am--include-marker ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zreadline.Po@am__quote@ # am--include-marker ++ ++$(am__depfiles_remade): ++ @$(MKDIR_P) $(@D) ++ @echo '# dummy' >$@-t && $(am__mv) $@-t $@ + +-lrzszbug: $(top_builddir)/config.status lrzszbug.in +- cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= ./config.status ++am--depfiles: $(am__depfiles_remade) + +-mostlyclean-binPROGRAMS: ++.c.o: ++@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< ++@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< ++ ++.c.obj: ++@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` ++@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` ++ ++ID: $(am__tagged_files) ++ $(am__define_uniq_tagged_files); mkid -fID $$unique ++tags: tags-am ++TAGS: tags + +-clean-binPROGRAMS: +- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) ++tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) ++ set x; \ ++ here=`pwd`; \ ++ $(am__define_uniq_tagged_files); \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ ++ test -n "$$unique" || unique=$$empty_fix; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ ++ fi ++ctags: ctags-am ++ ++CTAGS: ctags ++ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) ++ $(am__define_uniq_tagged_files); \ ++ test -z "$(CTAGS_ARGS)$$unique" \ ++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ ++ $$unique ++ ++GTAGS: ++ here=`$(am__cd) $(top_builddir) && pwd` \ ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" ++cscopelist: cscopelist-am ++ ++cscopelist-am: $(am__tagged_files) ++ list='$(am__tagged_files)'; \ ++ case "$(srcdir)" in \ ++ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ ++ *) sdir=$(subdir)/$(srcdir) ;; \ ++ esac; \ ++ for i in $$list; do \ ++ if test -f "$$i"; then \ ++ echo "$(subdir)/$$i"; \ ++ else \ ++ echo "$$sdir/$$i"; \ ++ fi; \ ++ done >> $(top_builddir)/cscope.files + +-distclean-binPROGRAMS: ++distclean-tags: ++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +-maintainer-clean-binPROGRAMS: ++distdir: $(BUILT_SOURCES) ++ $(MAKE) $(AM_MAKEFLAGS) distdir-am + +-install-binPROGRAMS: $(bin_PROGRAMS) +- @$(NORMAL_INSTALL) +- $(mkinstalldirs) $(DESTDIR)$(bindir) +- @list='$(bin_PROGRAMS)'; for p in $$list; do \ +- if test -f $$p; then \ +- echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`"; \ +- $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \ +- else :; fi; \ ++distdir-am: $(DISTFILES) ++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ list='$(DISTFILES)'; \ ++ dist_files=`for file in $$list; do echo $$file; done | \ ++ sed -e "s|^$$srcdirstrip/||;t" \ ++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ ++ case $$dist_files in \ ++ */*) $(MKDIR_P) `echo "$$dist_files" | \ ++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ ++ sort -u` ;; \ ++ esac; \ ++ for file in $$dist_files; do \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ if test -d $$d/$$file; then \ ++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ ++ else \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ ++ || exit 1; \ ++ fi; \ + done +- +-uninstall-binPROGRAMS: +- @$(NORMAL_UNINSTALL) +- list='$(bin_PROGRAMS)'; for p in $$list; do \ +- rm -f $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \ ++check-am: all-am ++check: check-am ++all-am: Makefile $(PROGRAMS) $(HEADERS) ++installdirs: ++ for dir in "$(DESTDIR)$(bindir)"; do \ ++ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done ++install: install-am ++install-exec: install-exec-am ++install-data: install-data-am ++uninstall: uninstall-am + +-.c.o: +- $(COMPILE) -c $< ++install-am: all-am ++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am ++ ++installcheck: installcheck-am ++install-strip: ++ if test -z '$(STRIP)'; then \ ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ install; \ ++ else \ ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ ++ fi ++mostlyclean-generic: + +-.s.o: +- $(COMPILE) -c $< ++clean-generic: + +-.S.o: +- $(COMPILE) -c $< ++distclean-generic: ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +-mostlyclean-compile: +- -rm -f *.o core *.core ++maintainer-clean-generic: ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean: clean-am + +-clean-compile: ++clean-am: clean-binPROGRAMS clean-generic mostlyclean-am + +-distclean-compile: +- -rm -f *.tab.c ++distclean: distclean-am ++ -rm -f ./$(DEPDIR)/canit.Po ++ -rm -f ./$(DEPDIR)/crctab.Po ++ -rm -f ./$(DEPDIR)/lrz.Po ++ -rm -f ./$(DEPDIR)/lsyslog.Po ++ -rm -f ./$(DEPDIR)/lsz.Po ++ -rm -f ./$(DEPDIR)/protname.Po ++ -rm -f ./$(DEPDIR)/rbsb.Po ++ -rm -f ./$(DEPDIR)/tcp.Po ++ -rm -f ./$(DEPDIR)/timing.Po ++ -rm -f ./$(DEPDIR)/zm.Po ++ -rm -f ./$(DEPDIR)/zperr.Po ++ -rm -f ./$(DEPDIR)/zreadline.Po ++ -rm -f Makefile ++distclean-am: clean-am distclean-compile distclean-generic \ ++ distclean-tags + +-maintainer-clean-compile: ++dvi: dvi-am + +-mostlyclean-krextra: ++dvi-am: + +-clean-krextra: +- -rm -f ansi2knr ++html: html-am + +-distclean-krextra: ++html-am: + +-maintainer-clean-krextra: +-ansi2knr: ansi2knr.o +- $(LINK) ansi2knr.o $(LIBS) +-ansi2knr.o: $(CONFIG_HEADER) +- +- +-mostlyclean-kr: +- -rm -f *_.c +- +-clean-kr: +- +-distclean-kr: +- +-maintainer-clean-kr: +- +-lrz: $(lrz_OBJECTS) $(lrz_DEPENDENCIES) +- @rm -f lrz +- $(LINK) $(lrz_LDFLAGS) $(lrz_OBJECTS) $(lrz_LDADD) $(LIBS) +- +-lsz: $(lsz_OBJECTS) $(lsz_DEPENDENCIES) +- @rm -f lsz +- $(LINK) $(lsz_LDFLAGS) $(lsz_OBJECTS) $(lsz_LDADD) $(LIBS) +-canit_.c: canit.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/canit.c; then echo $(srcdir)/canit.c; else echo canit.c; fi` | $(ANSI2KNR) canit_.c +-crctab_.c: crctab.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/crctab.c; then echo $(srcdir)/crctab.c; else echo crctab.c; fi` | $(ANSI2KNR) crctab_.c +-lrz_.c: lrz.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/lrz.c; then echo $(srcdir)/lrz.c; else echo lrz.c; fi` | $(ANSI2KNR) lrz_.c +-lsyslog_.c: lsyslog.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/lsyslog.c; then echo $(srcdir)/lsyslog.c; else echo lsyslog.c; fi` | $(ANSI2KNR) lsyslog_.c +-lsz_.c: lsz.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/lsz.c; then echo $(srcdir)/lsz.c; else echo lsz.c; fi` | $(ANSI2KNR) lsz_.c +-protname_.c: protname.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/protname.c; then echo $(srcdir)/protname.c; else echo protname.c; fi` | $(ANSI2KNR) protname_.c +-rbsb_.c: rbsb.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/rbsb.c; then echo $(srcdir)/rbsb.c; else echo rbsb.c; fi` | $(ANSI2KNR) rbsb_.c +-tcp_.c: tcp.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/tcp.c; then echo $(srcdir)/tcp.c; else echo tcp.c; fi` | $(ANSI2KNR) tcp_.c +-timing_.c: timing.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/timing.c; then echo $(srcdir)/timing.c; else echo timing.c; fi` | $(ANSI2KNR) timing_.c +-zm_.c: zm.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/zm.c; then echo $(srcdir)/zm.c; else echo zm.c; fi` | $(ANSI2KNR) zm_.c +-zperr_.c: zperr.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/zperr.c; then echo $(srcdir)/zperr.c; else echo zperr.c; fi` | $(ANSI2KNR) zperr_.c +-zreadline_.c: zreadline.c $(ANSI2KNR) +- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/zreadline.c; then echo $(srcdir)/zreadline.c; else echo zreadline.c; fi` | $(ANSI2KNR) zreadline_.c +-canit_.o crctab_.o lrz_.o lsyslog_.o lsz_.o protname_.o rbsb_.o tcp_.o \ +-timing_.o zm_.o zperr_.o zreadline_.o : $(ANSI2KNR) +- +-tags: TAGS +- +-ID: $(HEADERS) $(SOURCES) $(LISP) +- here=`pwd` && cd $(srcdir) \ +- && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP) ++info: info-am + +-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) +- tags=; \ +- here=`pwd`; \ +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ +- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ +- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) ++info-am: + +-mostlyclean-tags: ++install-data-am: + +-clean-tags: ++install-dvi: install-dvi-am + +-distclean-tags: +- -rm -f TAGS ID ++install-dvi-am: + +-maintainer-clean-tags: ++install-exec-am: install-binPROGRAMS install-exec-local + +-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) ++install-html: install-html-am + +-subdir = src ++install-html-am: + +-distdir: $(DISTFILES) +- @for file in $(DISTFILES); do \ +- d=$(srcdir); \ +- test -f $(distdir)/$$file \ +- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ +- || cp -p $$d/$$file $(distdir)/$$file; \ +- done +-canit.o: canit.c zglobal.h ../config.h zmodem.h ../lib/getopt.h +-crctab.o: crctab.c +-lrz.o: lrz.c zglobal.h ../config.h zmodem.h ../lib/getopt.h timing.h \ +- ../lib/long-options.h ../lib/xstrtoul.h ../lib/xstrtol.h \ +- ../lib/error.h +-lsyslog.o: lsyslog.c ../config.h zglobal.h zmodem.h +-lsz.o: lsz.c zglobal.h ../config.h zmodem.h ../lib/getopt.h timing.h \ +- ../lib/long-options.h ../lib/xstrtoul.h ../lib/xstrtol.h \ +- ../lib/error.h +-protname.o: protname.c zglobal.h ../config.h zmodem.h +-rbsb.o: rbsb.c zglobal.h ../config.h zmodem.h +-tcp.o: tcp.c ../config.h zglobal.h zmodem.h ../lib/error.h +-timing.o: timing.c zglobal.h ../config.h zmodem.h timing.h +-zm.o: zm.c zglobal.h ../config.h zmodem.h +-zperr.o: zperr.c zglobal.h ../config.h zmodem.h +-zreadline.o: zreadline.c zglobal.h ../config.h zmodem.h ../lib/error.h +- +-info: +-dvi: +-check: all +- $(MAKE) +-installcheck: +-install-exec: install-binPROGRAMS install-exec-local +- @$(NORMAL_INSTALL) ++install-info: install-info-am + +-install-data: +- @$(NORMAL_INSTALL) ++install-info-am: + +-install: install-exec install-data all +- @: ++install-man: + +-uninstall: uninstall-binPROGRAMS uninstall-local ++install-pdf: install-pdf-am + +-install-strip: +- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install +-installdirs: +- $(mkinstalldirs) $(DATADIR)$(bindir) ++install-pdf-am: + ++install-ps: install-ps-am + +-mostlyclean-generic: +- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) ++install-ps-am: + +-clean-generic: +- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) ++installcheck-am: + +-distclean-generic: +- -rm -f Makefile $(DISTCLEANFILES) +- -rm -f config.cache config.log stamp-h stamp-h[0-9]* +- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++maintainer-clean: maintainer-clean-am ++ -rm -f ./$(DEPDIR)/canit.Po ++ -rm -f ./$(DEPDIR)/crctab.Po ++ -rm -f ./$(DEPDIR)/lrz.Po ++ -rm -f ./$(DEPDIR)/lsyslog.Po ++ -rm -f ./$(DEPDIR)/lsz.Po ++ -rm -f ./$(DEPDIR)/protname.Po ++ -rm -f ./$(DEPDIR)/rbsb.Po ++ -rm -f ./$(DEPDIR)/tcp.Po ++ -rm -f ./$(DEPDIR)/timing.Po ++ -rm -f ./$(DEPDIR)/zm.Po ++ -rm -f ./$(DEPDIR)/zperr.Po ++ -rm -f ./$(DEPDIR)/zreadline.Po ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic + +-maintainer-clean-generic: +- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) +-mostlyclean: mostlyclean-binPROGRAMS mostlyclean-compile \ +- mostlyclean-krextra mostlyclean-kr mostlyclean-tags \ +- mostlyclean-generic +- +-clean: clean-binPROGRAMS clean-compile clean-krextra clean-kr \ +- clean-tags clean-generic mostlyclean +- +-distclean: distclean-binPROGRAMS distclean-compile distclean-krextra \ +- distclean-kr distclean-tags distclean-generic clean +- -rm -f config.status +- +-maintainer-clean: maintainer-clean-binPROGRAMS maintainer-clean-compile \ +- maintainer-clean-krextra maintainer-clean-kr \ +- maintainer-clean-tags maintainer-clean-generic \ +- distclean +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." ++mostlyclean: mostlyclean-am ++ ++mostlyclean-am: mostlyclean-compile mostlyclean-generic ++ ++pdf: pdf-am ++ ++pdf-am: ++ ++ps: ps-am ++ ++ps-am: ++ ++uninstall-am: uninstall-binPROGRAMS uninstall-local ++ ++.MAKE: install-am install-strip ++ ++.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \ ++ clean-binPROGRAMS clean-generic cscopelist-am ctags ctags-am \ ++ distclean distclean-compile distclean-generic distclean-tags \ ++ distdir dvi dvi-am html html-am info info-am install \ ++ install-am install-binPROGRAMS install-data install-data-am \ ++ install-dvi install-dvi-am install-exec install-exec-am \ ++ install-exec-local install-html install-html-am install-info \ ++ install-info-am install-man install-pdf install-pdf-am \ ++ install-ps install-ps-am install-strip installcheck \ ++ installcheck-am installdirs maintainer-clean \ ++ maintainer-clean-generic mostlyclean mostlyclean-compile \ ++ mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ ++ uninstall-am uninstall-binPROGRAMS uninstall-local + +-.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \ +-maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \ +-mostlyclean-compile distclean-compile clean-compile \ +-maintainer-clean-compile mostlyclean-krextra distclean-krextra \ +-clean-krextra maintainer-clean-krextra mostlyclean-kr distclean-kr \ +-clean-kr maintainer-clean-kr tags mostlyclean-tags distclean-tags \ +-clean-tags maintainer-clean-tags distdir info dvi installcheck \ +-install-exec install-data install uninstall all installdirs \ +-mostlyclean-generic distclean-generic clean-generic \ +-maintainer-clean-generic clean mostlyclean distclean maintainer-clean ++.PRECIOUS: Makefile + + + install-exec-local: +diff -uprN clean/lrzsz-0.12.20/src/zglobal.h lrzsz-0.12.20/src/zglobal.h +--- clean/lrzsz-0.12.20/src/zglobal.h 1998-12-29 12:34:59.000000000 +0000 ++++ lrzsz-0.12.20/src/zglobal.h 2019-11-25 16:32:42.000000000 +0000 +@@ -180,9 +180,6 @@ struct termios; + #if HAVE_LOCALE_H + # include <locale.h> + #endif +-#if !HAVE_SETLOCALE +-# define setlocale(Category, Locale) /* empty */ +-#endif + + #if ENABLE_NLS + # include <libintl.h> +diff -uprN clean/lrzsz-0.12.20/stamp-h.in lrzsz-0.12.20/stamp-h.in +--- clean/lrzsz-0.12.20/stamp-h.in 1998-12-30 07:51:07.000000000 +0000 ++++ lrzsz-0.12.20/stamp-h.in 1970-01-01 01:00:00.000000000 +0100 +@@ -1 +0,0 @@ +-timestamp +diff -uprN clean/lrzsz-0.12.20/testsuite/Makefile.in lrzsz-0.12.20/testsuite/Makefile.in +--- clean/lrzsz-0.12.20/testsuite/Makefile.in 1998-12-30 16:31:50.000000000 +0000 ++++ lrzsz-0.12.20/testsuite/Makefile.in 2019-11-26 11:37:46.000000000 +0000 +@@ -1,6 +1,8 @@ +-# Makefile.in generated automatically by automake 1.3 from Makefile.am ++# Makefile.in generated by automake 1.16.1 from Makefile.am. ++# @configure_input@ ++ ++# Copyright (C) 1994-2018 Free Software Foundation, Inc. + +-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -10,206 +12,477 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + +- +-SHELL = /bin/sh +- +-srcdir = @srcdir@ +-top_srcdir = @top_srcdir@ ++@SET_MAKE@ + VPATH = @srcdir@ +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +- +-bindir = @bindir@ +-sbindir = @sbindir@ +-libexecdir = @libexecdir@ +-datadir = @datadir@ +-sysconfdir = @sysconfdir@ +-sharedstatedir = @sharedstatedir@ +-localstatedir = @localstatedir@ +-libdir = @libdir@ +-infodir = @infodir@ +-mandir = @mandir@ +-includedir = @includedir@ +-oldincludedir = /usr/include +- +-DISTDIR = +- ++am__is_gnu_make = { \ ++ if test -z '$(MAKELEVEL)'; then \ ++ false; \ ++ elif test -n '$(MAKE_HOST)'; then \ ++ true; \ ++ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ ++ true; \ ++ else \ ++ false; \ ++ fi; \ ++} ++am__make_running_with_option = \ ++ case $${target_option-} in \ ++ ?) ;; \ ++ *) echo "am__make_running_with_option: internal error: invalid" \ ++ "target option '$${target_option-}' specified" >&2; \ ++ exit 1;; \ ++ esac; \ ++ has_opt=no; \ ++ sane_makeflags=$$MAKEFLAGS; \ ++ if $(am__is_gnu_make); then \ ++ sane_makeflags=$$MFLAGS; \ ++ else \ ++ case $$MAKEFLAGS in \ ++ *\\[\ \ ]*) \ ++ bs=\\; \ ++ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ ++ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ ++ esac; \ ++ fi; \ ++ skip_next=no; \ ++ strip_trailopt () \ ++ { \ ++ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ ++ }; \ ++ for flg in $$sane_makeflags; do \ ++ test $$skip_next = yes && { skip_next=no; continue; }; \ ++ case $$flg in \ ++ *=*|--*) continue;; \ ++ -*I) strip_trailopt 'I'; skip_next=yes;; \ ++ -*I?*) strip_trailopt 'I';; \ ++ -*O) strip_trailopt 'O'; skip_next=yes;; \ ++ -*O?*) strip_trailopt 'O';; \ ++ -*l) strip_trailopt 'l'; skip_next=yes;; \ ++ -*l?*) strip_trailopt 'l';; \ ++ -[dEDm]) skip_next=yes;; \ ++ -[JT]) skip_next=yes;; \ ++ esac; \ ++ case $$flg in \ ++ *$$target_option*) has_opt=yes; break;; \ ++ esac; \ ++ done; \ ++ test $$has_opt = yes ++am__make_dryrun = (target_option=n; $(am__make_running_with_option)) ++am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) + pkgdatadir = $(datadir)/@PACKAGE@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +- +-top_builddir = .. +- +-ACLOCAL = @ACLOCAL@ +-AUTOCONF = @AUTOCONF@ +-AUTOMAKE = @AUTOMAKE@ +-AUTOHEADER = @AUTOHEADER@ +- +-INSTALL = @INSTALL@ +-INSTALL_PROGRAM = @INSTALL_PROGRAM@ +-INSTALL_DATA = @INSTALL_DATA@ +-INSTALL_SCRIPT = @INSTALL_SCRIPT@ +-transform = @program_transform_name@ +- ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : +-CATALOGS = @CATALOGS@ +-CATOBJEXT = @CATOBJEXT@ ++build_triplet = @build@ ++host_triplet = @host@ ++subdir = testsuite ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ ++ $(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \ ++ $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ ++ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ ++ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ ++ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \ ++ $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) ++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ++CONFIG_HEADER = $(top_builddir)/config.h ++CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = ++AM_V_P = $(am__v_P_@AM_V@) ++am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) ++am__v_P_0 = false ++am__v_P_1 = : ++AM_V_GEN = $(am__v_GEN_@AM_V@) ++am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) ++am__v_GEN_0 = @echo " GEN " $@; ++am__v_GEN_1 = ++AM_V_at = $(am__v_at_@AM_V@) ++am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) ++am__v_at_0 = @ ++am__v_at_1 = ++SOURCES = ++DIST_SOURCES = ++am__can_run_installinfo = \ ++ case $$AM_UPDATE_INFO_DIR in \ ++ n|no|NO) false;; \ ++ *) (install-info --version) >/dev/null 2>&1;; \ ++ esac ++am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) ++DEJATOOL = $(PACKAGE) ++RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir ++EXPECT = expect ++RUNTEST = runtest ++am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/mkinstalldirs ++ACLOCAL = @ACLOCAL@ ++ALLOCA = @ALLOCA@ ++AMTAR = @AMTAR@ ++AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ + CC = @CC@ ++CCDEPMODE = @CCDEPMODE@ + CFLAGS = @CFLAGS@ + CPP = @CPP@ +-DATADIRNAME = @DATADIRNAME@ ++CPPFLAGS = @CPPFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ ++EGREP = @EGREP@ + ENABLE_TIMESYNC = @ENABLE_TIMESYNC@ +-GENCAT = @GENCAT@ +-GMOFILES = @GMOFILES@ ++EXEEXT = @EXEEXT@ ++GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ + GMSGFMT = @GMSGFMT@ +-GT_NO = @GT_NO@ +-GT_YES = @GT_YES@ +-INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@ +-INSTOBJEXT = @INSTOBJEXT@ +-INTLDEPS = @INTLDEPS@ ++GMSGFMT_015 = @GMSGFMT_015@ ++GREP = @GREP@ ++INSTALL = @INSTALL@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INTLLIBS = @INTLLIBS@ +-INTLOBJS = @INTLOBJS@ ++INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ + LDFLAGS = @LDFLAGS@ ++LIBICONV = @LIBICONV@ ++LIBINTL = @LIBINTL@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ ++LTLIBICONV = @LTLIBICONV@ ++LTLIBINTL = @LTLIBINTL@ ++LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-MKINSTALLDIRS = @MKINSTALLDIRS@ ++MKDIR_P = @MKDIR_P@ + MSGFMT = @MSGFMT@ ++MSGMERGE = @MSGMERGE@ ++MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@ ++OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ +-POFILES = @POFILES@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ + POSUB = @POSUB@ + RANLIB = @RANLIB@ +-U = @U@ +-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ ++SED = @SED@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ ++STRIP = @STRIP@ + USE_NLS = @USE_NLS@ + VERSION = @VERSION@ +-l = @l@ ++XGETTEXT = @XGETTEXT@ ++XGETTEXT_015 = @XGETTEXT_015@ ++XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ ++abs_builddir = @abs_builddir@ ++abs_srcdir = @abs_srcdir@ ++abs_top_builddir = @abs_top_builddir@ ++abs_top_srcdir = @abs_top_srcdir@ ++ac_ct_CC = @ac_ct_CC@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++builddir = @builddir@ ++datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++htmldir = @htmldir@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localedir = @localedir@ ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++psdir = @psdir@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++srcdir = @srcdir@ ++sysconfdir = @sysconfdir@ ++target_alias = @target_alias@ ++top_build_prefix = @top_build_prefix@ ++top_builddir = @top_builddir@ ++top_srcdir = @top_srcdir@ ++AUTOMAKE_OPTIONS = dejagnu ++DISTFILES = Makefile.am Makefile.in ++CLEANFILES = lrzsz.log lrzsz.sum site.bak ++DISTCLEANFILES = site.exp ++all: all-am + +-AUTOMAKE_OPTIONS=dejagnu ++.SUFFIXES: ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ ++ && { if test -f $@; then exit 0; else break; fi; }; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu testsuite/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu testsuite/Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ ++ esac; ++ ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++$(top_srcdir)/configure: $(am__configure_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): ++tags TAGS: + +-DISTFILES=Makefile.am Makefile.in +-CLEANFILES=lrzsz.log lrzsz.sum site.bak +-DISTCLEANFILES=site.exp +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_HEADER = ../config.h +-CONFIG_CLEAN_FILES = +-DIST_COMMON = Makefile.am Makefile.in ++ctags CTAGS: + ++cscope cscopelist: + +-TAR = tar +-GZIP = --best +-EXPECT = expect +-RUNTEST = runtest +-all: Makefile + +-.SUFFIXES: +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps testsuite/Makefile ++check-DEJAGNU: site.exp ++ srcdir='$(srcdir)'; export srcdir; \ ++ EXPECT=$(EXPECT); export EXPECT; \ ++ if $(SHELL) -c "$(RUNTEST) --version" > /dev/null 2>&1; then \ ++ exit_status=0; l='$(DEJATOOL)'; for tool in $$l; do \ ++ if $(RUNTEST) $(RUNTESTDEFAULTFLAGS) $(AM_RUNTESTFLAGS) $(RUNTESTFLAGS); \ ++ then :; else exit_status=1; fi; \ ++ done; \ ++ else echo "WARNING: could not find '$(RUNTEST)'" 1>&2; :;\ ++ fi; \ ++ exit $$exit_status ++site.exp: Makefile $(EXTRA_DEJAGNU_SITE_CONFIG) ++ @echo 'Making a new site.exp file ...' ++ @echo '## these variables are automatically generated by make ##' >site.tmp ++ @echo '# Do not edit here. If you wish to override these values' >>site.tmp ++ @echo '# edit the last section' >>site.tmp ++ @echo 'set srcdir "$(srcdir)"' >>site.tmp ++ @echo "set objdir `pwd`" >>site.tmp ++ @echo 'set build_alias "$(build_alias)"' >>site.tmp ++ @echo 'set build_triplet $(build_triplet)' >>site.tmp ++ @echo 'set host_alias "$(host_alias)"' >>site.tmp ++ @echo 'set host_triplet $(host_triplet)' >>site.tmp ++ @list='$(EXTRA_DEJAGNU_SITE_CONFIG)'; for f in $$list; do \ ++ echo "## Begin content included from file $$f. Do not modify. ##" \ ++ && cat `test -f "$$f" || echo '$(srcdir)/'`$$f \ ++ && echo "## End content included from file $$f. ##" \ ++ || exit 1; \ ++ done >> site.tmp ++ @echo "## End of auto-generated content; you can edit from here. ##" >> site.tmp ++ @if test -f site.exp; then \ ++ sed -e '1,/^## End of auto-generated content.*##/d' site.exp >> site.tmp; \ ++ fi ++ @-rm -f site.bak ++ @test ! -f site.exp || mv site.exp site.bak ++ @mv site.tmp site.exp ++ ++distclean-DEJAGNU: ++ -rm -f site.exp site.bak ++ -l='$(DEJATOOL)'; for tool in $$l; do \ ++ rm -f $$tool.sum $$tool.log; \ ++ done + +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +- cd $(top_builddir) \ +- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status ++distdir: $(BUILT_SOURCES) ++ $(MAKE) $(AM_MAKEFLAGS) distdir-am + +-tags: TAGS +-TAGS: ++distdir-am: $(DISTFILES) ++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ list='$(DISTFILES)'; \ ++ dist_files=`for file in $$list; do echo $$file; done | \ ++ sed -e "s|^$$srcdirstrip/||;t" \ ++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ ++ case $$dist_files in \ ++ */*) $(MKDIR_P) `echo "$$dist_files" | \ ++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ ++ sort -u` ;; \ ++ esac; \ ++ for file in $$dist_files; do \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ if test -d $$d/$$file; then \ ++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ ++ else \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ ++ || exit 1; \ ++ fi; \ ++ done ++ $(MAKE) $(AM_MAKEFLAGS) \ ++ top_distdir="$(top_distdir)" distdir="$(distdir)" \ ++ dist-hook ++check-am: all-am ++ $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU ++check: check-am ++all-am: Makefile ++installdirs: ++install: install-am ++install-exec: install-exec-am ++install-data: install-data-am ++uninstall: uninstall-am + ++install-am: all-am ++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) ++installcheck: installcheck-am ++install-strip: ++ if test -z '$(STRIP)'; then \ ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ install; \ ++ else \ ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ ++ fi ++mostlyclean-generic: + +-subdir = testsuite ++clean-generic: ++ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +-distdir: $(DISTFILES) +- @for file in $(DISTFILES); do \ +- d=$(srcdir); \ +- test -f $(distdir)/$$file \ +- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ +- || cp -p $$d/$$file $(distdir)/$$file; \ +- done +- $(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook ++distclean-generic: ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) ++ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +-RUNTESTFLAGS = ++maintainer-clean-generic: ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean: clean-am + +-DEJATOOL = $(PACKAGE) ++clean-am: clean-generic mostlyclean-am + +-RUNTESTDEFAULTFLAGS = --tool $(DEJATOOL) --srcdir $$srcdir ++distclean: distclean-am ++ -rm -f Makefile ++distclean-am: clean-am distclean-DEJAGNU distclean-generic + +-check-DEJAGNU: site.exp +- srcdir=`cd $(srcdir) && pwd`; export srcdir; \ +- EXPECT=$(EXPECT); export EXPECT; \ +- runtest=$(RUNTEST); \ +- if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ +- $$runtest $(RUNTESTDEFAULTFLAGS) $(RUNTESTFLAGS); \ +- else echo "WARNING: could not find \`runtest'" 1>&2; :;\ +- fi +-site.exp: Makefile +- @echo 'Making a new site.exp file...' +- -@rm -f site.bak +- @echo '## these variables are automatically generated by make ##' > $@-t +- @echo '# Do not edit here. If you wish to override these values' >> $@-t +- @echo '# edit the last section' >> $@-t +- @echo 'set tool $(DEJATOOL)' >> $@-t +- @echo 'set srcdir $(srcdir)' >> $@-t +- @echo 'set objdir' `pwd` >> $@-t +- @echo '## All variables above are generated by configure. Do Not Edit ##' >> $@-t +- -@sed '1,/^## All variables above are.*##/ d' site.bak >> $@-t +- -@mv site.exp site.bak +- @mv $@-t site.exp +-info: +-dvi: +-check: all +- $(MAKE) check-DEJAGNU +-installcheck: +-install-exec: +- @$(NORMAL_INSTALL) ++dvi: dvi-am + +-install-data: +- @$(NORMAL_INSTALL) ++dvi-am: + +-install: install-exec install-data all +- @: ++html: html-am + +-uninstall: ++html-am: + +-install-strip: +- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install +-installdirs: ++info: info-am + ++info-am: + +-mostlyclean-generic: +- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) ++install-data-am: + +-clean-generic: +- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) ++install-dvi: install-dvi-am + +-distclean-generic: +- -rm -f Makefile $(DISTCLEANFILES) +- -rm -f config.cache config.log stamp-h stamp-h[0-9]* +- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++install-dvi-am: + +-maintainer-clean-generic: +- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) +-mostlyclean: mostlyclean-generic ++install-exec-am: + +-clean: clean-generic mostlyclean ++install-html: install-html-am + +-distclean: distclean-generic clean +- -rm -f config.status ++install-html-am: + +-maintainer-clean: maintainer-clean-generic distclean +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." ++install-info: install-info-am ++ ++install-info-am: ++ ++install-man: ++ ++install-pdf: install-pdf-am ++ ++install-pdf-am: ++ ++install-ps: install-ps-am ++ ++install-ps-am: ++ ++installcheck-am: ++ ++maintainer-clean: maintainer-clean-am ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic ++ ++mostlyclean: mostlyclean-am ++ ++mostlyclean-am: mostlyclean-generic ++ ++pdf: pdf-am ++ ++pdf-am: ++ ++ps: ps-am ++ ++ps-am: ++ ++uninstall-am: ++ ++.MAKE: check-am install-am install-strip ++ ++.PHONY: all all-am check check-DEJAGNU check-am clean clean-generic \ ++ cscopelist-am ctags-am dist-hook distclean distclean-DEJAGNU \ ++ distclean-generic distdir dvi dvi-am html html-am info info-am \ ++ install install-am install-data install-data-am install-dvi \ ++ install-dvi-am install-exec install-exec-am install-html \ ++ install-html-am install-info install-info-am install-man \ ++ install-pdf install-pdf-am install-ps install-ps-am \ ++ install-strip installcheck installcheck-am installdirs \ ++ maintainer-clean maintainer-clean-generic mostlyclean \ ++ mostlyclean-generic pdf pdf-am ps ps-am tags-am uninstall \ ++ uninstall-am + +-.PHONY: tags distdir check-DEJAGNU info dvi installcheck install-exec \ +-install-data install uninstall all installdirs mostlyclean-generic \ +-distclean-generic clean-generic maintainer-clean-generic clean \ +-mostlyclean distclean maintainer-clean ++.PRECIOUS: Makefile + + + dist-hook: |