diff options
Diffstat (limited to 'meta/conf/machine')
28 files changed, 614 insertions, 0 deletions
diff --git a/meta/conf/machine/akita.conf b/meta/conf/machine/akita.conf new file mode 100644 index 0000000000..89c0d031ee --- /dev/null +++ b/meta/conf/machine/akita.conf @@ -0,0 +1,8 @@ +#@TYPE: Machine +#@NAME: Sharp Zaurus SL-C1000 +#@DESCRIPTION: Machine configuration for the Sharp Zaurus SL-C1000 device + +include conf/machine/include/zaurus-clamshell.conf +include conf/machine/include/zaurus-clamshell-2.6.conf + +ROOT_FLASH_SIZE = "58" diff --git a/meta/conf/machine/c7x0.conf b/meta/conf/machine/c7x0.conf new file mode 100644 index 0000000000..0bd9623526 --- /dev/null +++ b/meta/conf/machine/c7x0.conf @@ -0,0 +1,9 @@ +#@TYPE: Machine +#@NAME: Sharp Zaurus SL-C7x0 +#@DESCRIPTION: Machine configuration for the Sharp Zaurus SL-C700, Sharp Zaurus SL-C750, Sharp Zaurus SL-C760, Sharp Zaurus SL-C860 devices + +include conf/machine/include/zaurus-clamshell.conf +include conf/machine/include/zaurus-clamshell-2.6.conf + +ROOT_FLASH_SIZE = "25" +# yes, we are aware that the husky (c760,c860) has 54MB rootfs, but we don't make a special image for it. diff --git a/meta/conf/machine/cmx270.conf b/meta/conf/machine/cmx270.conf new file mode 100644 index 0000000000..fc281f3746 --- /dev/null +++ b/meta/conf/machine/cmx270.conf @@ -0,0 +1,31 @@ +#@TYPE: Machine +#@NAME: Nokia 770 internet tablet +#@DESCRIPTION: Machine configuration for the Nokia 770, an omap 1710 based tablet +TARGET_ARCH = "arm" +IPKG_EXTRA_ARCHS = "armv4 armv5te" + +EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x4000 -n" + +IMAGE_CMD_jffs2 = "mkdir -p ${DEPLOY_DIR_IMAGE}; \ + mkfs.jffs2 --root=${IMAGE_ROOTFS} --faketime \ + --output=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.img ${EXTRA_IMAGECMD}; " + +PREFERRED_PROVIDER_virtual/bootloader = "" + +# 800x480 is big enough for me +GUI_MACHINE_CLASS = "bigscreen" + +# Use tune-arm926 per default. Machine independent feeds should be built with tune-strongarm. +include conf/machine/include/tune-xscale.conf + +#size of the root partition (yes, it is 123 MB) +ROOT_FLASH_SIZE = "128" + +# serial console port on devboard rev. B3 +SERIAL_CONSOLE = "115200 ttyS0" + +PREFERRED_PROVIDER_virtual/kernel = "linux-cmx270" + + +include conf/machine/include/handheld-common.conf + diff --git a/meta/conf/machine/include/handheld-common.conf b/meta/conf/machine/include/handheld-common.conf new file mode 100644 index 0000000000..f8767d2ddf --- /dev/null +++ b/meta/conf/machine/include/handheld-common.conf @@ -0,0 +1,23 @@ +HANDHELD_MODULES = "ipv6 \ +ipsec \ +nvrd \ +mip6-mn \ +tun \ +ide-cs ide-disk ide-probe-mod \ +loop \ +vfat ext2 \ +sunrpc nfs \ +btuart-cs dtl1-cs bt3c-cs rfcomm bnep l2cap sco hci_uart hidp \ +pcnet-cs serial-cs airo-cs \ +af_packet \ +ppp-async ppp-deflate ppp-mppe \ +ip-gre ip-tables ipip \ +irda irlan irnet irport irtty ircomm-tty \ +input uinput \ +" + +# Configuration bits for "generic handheld" +BOOTSTRAP_EXTRA_RDEPENDS += "${PCMCIA_MANAGER} apm apmd network-suspend-scripts" +BOOTSTRAP_EXTRA_RRECOMMENDS += "ppp wireless-tools irda-utils openswan wpa-supplicant-nossl lrzsz ppp-dialin ${@linux_module_packages('${HANDHELD_MODULES}', d)}" + +INHERIT += "linux_modules" diff --git a/meta/conf/machine/include/ipaq-common.conf b/meta/conf/machine/include/ipaq-common.conf new file mode 100644 index 0000000000..eb696cf9f9 --- /dev/null +++ b/meta/conf/machine/include/ipaq-common.conf @@ -0,0 +1,7 @@ +IPAQ_MODULES = "apm h3600_generic_sleeve ipaq-sleeve ipaq-mtd-asset nvrd atmelwlandriver sa1100-rtc ipaq-hal h3600_ts usb-eth wavelan_cs keybdev" + +BOOTSTRAP_EXTRA_RRECOMMENDS += "kbdd bl hostap-modules-cs orinoco-modules-cs atmelwlandriver ${@linux_module_packages('${IPAQ_MODULES}', d)}" +BOOTSTRAP_EXTRA_RRECOMMENDS_append_kernel24 += "mipv6" + +PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive" + diff --git a/meta/conf/machine/include/ixp4xx.conf b/meta/conf/machine/include/ixp4xx.conf new file mode 100644 index 0000000000..93befb92ce --- /dev/null +++ b/meta/conf/machine/include/ixp4xx.conf @@ -0,0 +1,174 @@ +#@TYPE: Machine configuration +#@NAME: ixp4xx +#@DESCRIPTION: genric machine configuration for ixp4xx platforms + +#------------------------------------------------------------------------------- +# INPUTS +#------------------------------------------------------------------------------- +# conf/${DISTRO}.conf is included after this file and should be used to modify +# variables identified as 'INPUTS' to the required values for the DISTRO, this +# will cause the board specific settings (which depend for the most part on the +# exact CPU used) to be set correctly within this file. The results are the +# variables identifies here as 'OUTPUTS' +# +#variable = "default" +# <possible values> +# description + +ARCH_BYTE_SEX = "be" +# "be" "le" +# The memory byte sex and (on correctly implemented hardware - the IXP4XX is +# correct) the byte sex of the buses within the system. 'be' (big-endian) +# means that the first byte is the most significant byte on a bus, 'le' +# (little-endian) means that the first byte is the least significant byte. + +ARM_INSTRUCTION_SET = "arm" +# "arm" "thumb" +# The instruction set the compiler should use when generating application +# code. The kernel is always compiled with arm code at present. arm code +# is the original 32 bit ARM instruction set, thumb code is the 16 bit +# encoded RISC sub-set. Thumb code is smaller (maybe 70% of the ARM size) +# but requires more instructions (140% for 70% smaller code) so may be +# slower. + +THUMB_INTERWORK = "yes" +# "yes" "no" +# Whether to compile with code to allow interworking between the two +# instruction sets. This allows thumb code to be executed on a primarily +# arm system and vice versa. It is strongly recommended that DISTROs not +# turn this off - the actual cost is very small. + +DISTRO_BASE = "" +# "" ":<base>" +# If given this must be the name of a 'distro' to add to the bitbake OVERRIDES +# after ${DISTRO}, this allows different distros to share a common base of +# overrides. The value given must include a leading ':' or chaos will result. + +IXP4XX_SUFFIX = "${MACHINE_ARCH}" +# <string> +# Kernel suffix - 'ixp4xxbe' or 'ixp4xxle' for a truely generic image, controls +# the suffix on the name of the generated zImage, override in the DISTRO +# configuration if patches or defconfig are changed for the DISTRO. + +#------------------------------------------------------------------------------- +# OUTPUTS +#------------------------------------------------------------------------------- + +#OVERRIDES +# The standard ':' separated list of overrides used by bitbake - see the +# basic setting in bitbake.conf. This list is based on that used for the +# standard setting however :<base>, :thumb and :thumb-interwork will be +# inserted at appropriate points if a base distro, default use of thumb or +# arm/thumb interworking are enabled in the inputs. +OVERRIDE_THUMB = "${@['', ':thumb'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}" +OVERRIDE_INTERWORK = "${@['', ':thumb-interwork'][bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes']}" +OVERRIDES = "local:${MACHINE}:ixp4xx:${DISTRO}${DISTRO_BASE}:${TARGET_OS}:${TARGET_ARCH}${OVERRIDE_THUMB}${OVERRIDE_INTERWORK}:build-${BUILD_OS}:fail-fast" + +# TARGET_CC_ARCH +# TARGET_CC_KERNEL_ARCH +# TARGET_LD_ARCH +# TARGET_LD_KERNEL_ARCH +# Compiler and linker options for application code and kernel code. These +# options ensure that the compiler has the correct settings for the selected +# instruction set and interworking. +ARM_INTERWORK_M_OPT = "${@['-mno-thumb-interwork', '-mthumb-interwork'][bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes']}" +ARM_THUMB_M_OPT = "${@['-mno-thumb', '-mthumb'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}" +# +TARGET_CC_ARCH = "-march=armv5te -mtune=xscale ${ARM_INTERWORK_M_OPT} ${ARM_THUMB_M_OPT}" +TARGET_CC_KERNEL_ARCH = "-march=armv5te -mtune=xscale -mno-thumb-interwork -mno-thumb" +TARGET_LD_ARCH = "" +TARGET_LD_KERNEL_ARCH = "" + +# FULL_OPTIMIZATION +# Optimization settings. Os works fine and is significantly better than O2. +# The other settings are somewhat arbitrary. The optimisations chosen here +# include the ones which 'break' symbolic debugging (because the compiler does +# not include enough information to allow the debugger to know where given +# values are.) The -fno options are an attempt to cancel explicit use of space +# consuming options found in some packages (this isn't a complete list, this is +# just the ones which package writers seem to know about and abuse). +FULL_OPTIMIZATION = "-Os -fomit-frame-pointer -frename-registers \ + -fno-unroll-loops -fno-inline-functions \ + -fweb -funit-at-a-time" + +# TARGET_ARCH +# The correct setting for the system endianness (ARCH_BYTE_SEX). This will +# be arm (le) or armeb (be) - it is difficult to be more precise in the +# setting because of the large number of ways it is used within OpenEmbedded. +TARGET_ARCH = "${@['armeb', 'arm'][bb.data.getVar('ARCH_BYTE_SEX', d, 1) == 'le']}" + +# TARGET_PACKAGE_ARCH [not used] +# The correct setting for the generated packages. This corresponds to the +# -march flag passed to the compiler because that limits the architectures +# on which the generated code will run. +BYTE_SEX_CHAR = "${@['b', 'l'][bb.data.getVar('ARCH_BYTE_SEX', d, 1) == 'le']}" +TARGET_PACKAGE_ARCH_BASE = "${@['armv5te', 'thumbv5t'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}" +TARGET_PACKAGE_ARCH = "${TARGET_PACKAGE_ARCH_BASE}${BYTE_SEX_CHAR}" + +# MACHINE_ARCH +# The correct setting for packages which are specific to the machine, this +# defaults to ${MACHINE} in bitbake.conf, however it is set to ixp4xx here +# because everything built here is no more specific than that. +MACHINE_ARCH = "ixp4xx${ARCH_BYTE_SEX}" + +# IPKG_EXTRA_ARCHS +# The full list of package architectures which should run on the system. +# This takes into account both the board level issues and the INPUTS set +# by the distro. The arm list is derived from the architecture settings +# known to gcc, the thumb list is then derived from that (only the 't' +# architectures of course). +#[not used]: TARGET_ARCH is handled below because it is also currently +# used for thumb packages. +#ARM_ARCHITECTURES = "${TARGET_ARCH} armv2${BYTE_SEX_CHAR} armv2a${BYTE_SEX_CHAR} armv3${BYTE_SEX_CHAR} armv3m${BYTE_SEX_CHAR} armv4${BYTE_SEX_CHAR} armv4t${BYTE_SEX_CHAR} armv5${BYTE_SEX_CHAR} armv5t${BYTE_SEX_CHAR} armv5e${BYTE_SEX_CHAR} armv5te${BYTE_SEX_CHAR} xscale${BYTE_SEX_CHAR}" +ARM_ARCHITECTURES = "armv2${BYTE_SEX_CHAR} armv2a${BYTE_SEX_CHAR} armv3${BYTE_SEX_CHAR} armv3m${BYTE_SEX_CHAR} armv4${BYTE_SEX_CHAR} armv4t${BYTE_SEX_CHAR} armv5${BYTE_SEX_CHAR} armv5t${BYTE_SEX_CHAR} armv5e${BYTE_SEX_CHAR} armv5te${BYTE_SEX_CHAR} xscale${BYTE_SEX_CHAR}" +THUMB_ARCHITECTURES = "thumbe${BYTE_SEX_CHAR} thumbv4t${BYTE_SEX_CHAR} thumbv5t${BYTE_SEX_CHAR}" + +# NOTE: this list contains just the things which rootfs_ipk.bbclass does +# not add, rootfs_ipk.bbclass evaluates: +# +# ipkgarchs="all any noarch ${TARGET_ARCH} ${IPKG_EXTRA_ARCHS} ${MACHINE}" +# +# This is a priority ordered list - most desireable architecture at the end, +# so put <ARM_INSTRUCTION_SET>_ARCHITECTURES at the end and, if +# THUMB_INTERWORK precede this with the other architectures. +IPKG_EXTRA_ARCHS = "ixp4xx ${MACHINE} \ + ${@(lambda arch_thumb, arch_arm, is_arm, interwork: \ + (interwork and (is_arm and arch_thumb or arch_arm) + ' ' or '') \ + + '${TARGET_ARCH} ' + (is_arm and arch_arm or arch_thumb)) \ + (bb.data.getVar('THUMB_ARCHITECTURES', d, 1), \ + bb.data.getVar('ARM_ARCHITECTURES', d, 1), \ + bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) != 'thumb', \ + bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes')} \ + ${MACHINE_ARCH} ${MACHINE}${ARCH_BYTE_SEX}" + +# IPKG_ARCH_LIST [not used] +# This is used to override the ipkgarchs settings in rootfs_ipk.bbclass, allowing +# the removal of the raw "${MACHINE}" from the end of the list. ${MACHINE} and +# ixp4xx are included at the start (lower priority) as the non-byte-sex specific +# versions. +IPKG_ARCH_LIST = "all any noarch ixp4xx ${MACHINE} ${IPKG_EXTRA_ARCHS}" + +#------------------------------------------------------------------------------- +# Package versions +#------------------------------------------------------------------------------- +# Warning: these are shared across the different machine and distro +# configurations but can be overridden therein if required. +SRCDATE_ipkg-utils ?= "20060106" +SRCDATE_ipkg-utils-native ?= "20060106" +SRCDATE_ipkg-link ?= "20060106" +SRCDATE_irssi ?= "20050930" + +CVS_TARBALL_STASH = "http://sources.nslu2-linux.org/sources/" +INHERIT += "nslu2-mirrors" + +PREFERRED_VERSION_ipkg ?= "0.99.154" +PREFERRED_VERSION_ipkg-native ?= "0.99.154" + +#------------------------------------------------------------------------------- +# Board defaults +#------------------------------------------------------------------------------- +# These values are board specific but they seem to be common to a large number +# of boards so are reasonable defaults. +SERIAL_CONSOLE = "115200 ttyS0" +KERNEL_CONSOLE = "ttyS0,115200n8" +USE_VT = "0" diff --git a/meta/conf/machine/include/poodle-2.6.conf b/meta/conf/machine/include/poodle-2.6.conf new file mode 100644 index 0000000000..9076355522 --- /dev/null +++ b/meta/conf/machine/include/poodle-2.6.conf @@ -0,0 +1,43 @@ +PREFERRED_PROVIDER_virtual/kernel = "linux-openzaurus" + +PCMCIA_MANAGER ?= "pcmciautils" + +BOOTSTRAP_EXTRA_RDEPENDS += "kernel udev sysfsutils spectrum-fw \ +${PCMCIA_MANAGER} apm wireless-tools irda-utils udev-utils keymaps hostap-utils prism3-firmware prism3-support \ +ppp ppp-dialin alsa-utils-alsactl alsa-utils-alsamixer module-init-tools alsa-conf zaurusd" + +# Ethernet modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-pcnet-cs" +# NFS Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-nfs kernel-module-lockd kernel-module-sunrpc" +# Crypto Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-des kernel-module-md5" +# SMB and CRAMFS +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-smbfs kernel-module-cramfs" +# Serial Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-8250 kernel-module-serial-cs" +# Bluetooth Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-bluetooth kernel-module-l2cap kernel-module-rfcomm kernel-module-hci-vhci \ + kernel-module-bnep kernel-module-hidp kernel-module-hci-uart kernel-module-sco \ + kernel-module-bt3c-cs kernel-module-bluecard-cs kernel-module-btuart-cs kernel-module-dtl1-cs" +# Infrared Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-pxaficp-ir kernel-module-irda kernel-module-ircomm \ + kernel-module-ircomm-tty kernel-module-irlan kernel-module-irnet kernel-module-ir-usb" + +# USB Gadget Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-gadgetfs kernel-module-g-file-storage \ + kernel-module-g-serial kernel-module-g-ether" + +# Wireless Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-hostap kernel-module-hostap-cs \ + kernel-module-hermes kernel-module-orinoco \ + kernel-module-orinoco-cs kernel-module-spectrum-cs \ + hostap-conf orinoco-conf" + +# Sound Modules +###BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-snd-mixer-oss kernel-module-snd-pcm-oss" +BOOTSTRAP_EXTRA_SOUND = "kernel-module-soundcore kernel-module-snd kernel-module-snd-page-alloc kernel-module-snd-timer \ + kernel-module-snd-pcm \ + kernel-module-snd-soc-core kernel-module-snd-soc-pxa2xx kernel-module-snd-soc-pxa2xx-i2s" + +###BOOTSTRAP_EXTRA_RDEPENDS_append_poodle += "${BOOTSTRAP_EXTRA_SOUND} kernel-module-snd-soc-poodle kernel-module-snd-soc-wm8731 " diff --git a/meta/conf/machine/include/thinclient-common.conf b/meta/conf/machine/include/thinclient-common.conf new file mode 100644 index 0000000000..4a96b42525 --- /dev/null +++ b/meta/conf/machine/include/thinclient-common.conf @@ -0,0 +1,19 @@ +THINCLIENT_MODULES = "ipv6 \ +mip6-mn \ +tun \ +loop \ +vfat \ +sunrpc nfs \ +rfcomm bnep l2cap sco \ +af_packet \ +ppp-async ppp-deflate ppp-mppe \ +ip-gre ip-tables ipip \ +irda irlan irnet irport irtty \ +input uinput \ +" + +# Configuration bits for "generic thinclient" +BOOTSTRAP_EXTRA_RDEPENDS += "apm" +BOOTSTRAP_EXTRA_RRECOMMENDS += "ppp bluez-utils wireless-tools ${@linux_module_packages('${THINCLIENT_MODULES}', d)}" + +INHERIT += "linux_modules" diff --git a/meta/conf/machine/include/tosa-2.6.conf b/meta/conf/machine/include/tosa-2.6.conf new file mode 100644 index 0000000000..c7805c36fe --- /dev/null +++ b/meta/conf/machine/include/tosa-2.6.conf @@ -0,0 +1,6 @@ +include conf/machine/include/zaurus-clamshell-2.6.conf +# wlan-ng Modules +BOOTSTRAP_EXTRA_RDEPENDS += "wlan-ng-modules-usb" + +# WM97xx Modules +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-wm97xx-core kernel-module-wm9705 kernel-module-pxa-wm97xx" diff --git a/meta/conf/machine/include/tune-arm920t.conf b/meta/conf/machine/include/tune-arm920t.conf new file mode 100644 index 0000000000..936b137517 --- /dev/null +++ b/meta/conf/machine/include/tune-arm920t.conf @@ -0,0 +1,2 @@ +TARGET_CC_ARCH = "-march=armv4t -mtune=arm920t" + diff --git a/meta/conf/machine/include/tune-arm926ejs.conf b/meta/conf/machine/include/tune-arm926ejs.conf new file mode 100644 index 0000000000..c1462ee148 --- /dev/null +++ b/meta/conf/machine/include/tune-arm926ejs.conf @@ -0,0 +1,6 @@ +#if gcc breaks change arm926ejs to arm926ej-s +# For gcc 3.x you need: +TARGET_CC_ARCH = "-march=armv5te -mtune=arm926ejs" +# For gcc 4.x you need: +#TARGET_CC_ARCH = "-march=armv5te -mtune=arm926ej-s" +PACKAGE_ARCH = "armv5te" diff --git a/meta/conf/machine/include/tune-arm9tdmi.conf b/meta/conf/machine/include/tune-arm9tdmi.conf new file mode 100644 index 0000000000..cfc3bad1c1 --- /dev/null +++ b/meta/conf/machine/include/tune-arm9tdmi.conf @@ -0,0 +1 @@ +TARGET_CC_ARCH = "-mcpu=arm9tdmi -mtune=arm9tdmi" diff --git a/meta/conf/machine/include/tune-c3.conf b/meta/conf/machine/include/tune-c3.conf new file mode 100644 index 0000000000..e6a522af10 --- /dev/null +++ b/meta/conf/machine/include/tune-c3.conf @@ -0,0 +1,3 @@ +TARGET_CC_ARCH = "-march=c3 -mtune=c3" +PACKAGE_ARCH = "i586" + diff --git a/meta/conf/machine/include/tune-ep9312.conf b/meta/conf/machine/include/tune-ep9312.conf new file mode 100644 index 0000000000..f7a6fb845b --- /dev/null +++ b/meta/conf/machine/include/tune-ep9312.conf @@ -0,0 +1,6 @@ +TARGET_CC_ARCH = "-march=ep9312 -mtune=ep9312" +# add "-mfp=maverick" for newer gcc versions > 4.0 + +#set arch to ep9312 for all generated packages +PACKAGE_ARCH = "ep9312" + diff --git a/meta/conf/machine/include/tune-ppc603e.conf b/meta/conf/machine/include/tune-ppc603e.conf new file mode 100644 index 0000000000..7c8714cfc2 --- /dev/null +++ b/meta/conf/machine/include/tune-ppc603e.conf @@ -0,0 +1,2 @@ +TARGET_CC_ARCH = "-mcpu=603e" +PACKAGE_ARCH = "ppc603e" diff --git a/meta/conf/machine/include/tune-ppce500.conf b/meta/conf/machine/include/tune-ppce500.conf new file mode 100644 index 0000000000..11717eba70 --- /dev/null +++ b/meta/conf/machine/include/tune-ppce500.conf @@ -0,0 +1,2 @@ +TARGET_CC_ARCH = "-mcpu=8540" +PACKAGE_ARCH = "ppce500" diff --git a/meta/conf/machine/include/tune-sh3.conf b/meta/conf/machine/include/tune-sh3.conf new file mode 100644 index 0000000000..192dd8fd22 --- /dev/null +++ b/meta/conf/machine/include/tune-sh3.conf @@ -0,0 +1 @@ +TARGET_CC_ARCH = "-ml -m3" diff --git a/meta/conf/machine/include/tune-sh4.conf b/meta/conf/machine/include/tune-sh4.conf new file mode 100644 index 0000000000..866f7f89d5 --- /dev/null +++ b/meta/conf/machine/include/tune-sh4.conf @@ -0,0 +1 @@ +TARGET_CC_ARCH = "-ml -m4" diff --git a/meta/conf/machine/include/tune-strongarm.conf b/meta/conf/machine/include/tune-strongarm.conf new file mode 100644 index 0000000000..8654c996ef --- /dev/null +++ b/meta/conf/machine/include/tune-strongarm.conf @@ -0,0 +1,2 @@ +TARGET_CC_ARCH = "-march=armv4 -mtune=xscale" + diff --git a/meta/conf/machine/include/tune-supersparc.conf b/meta/conf/machine/include/tune-supersparc.conf new file mode 100644 index 0000000000..1b1ec1207f --- /dev/null +++ b/meta/conf/machine/include/tune-supersparc.conf @@ -0,0 +1,2 @@ +TARGET_CC_ARCH = "-mcpu=supersparc" +PACKAGE_ARCH = "supersparc" diff --git a/meta/conf/machine/include/tune-xscale.conf b/meta/conf/machine/include/tune-xscale.conf new file mode 100644 index 0000000000..0b98f09fc8 --- /dev/null +++ b/meta/conf/machine/include/tune-xscale.conf @@ -0,0 +1,3 @@ +TARGET_CC_ARCH = "-march=armv5te -mtune=xscale" +PACKAGE_ARCH = "armv5te" + diff --git a/meta/conf/machine/include/zaurus-clamshell-2.6.conf b/meta/conf/machine/include/zaurus-clamshell-2.6.conf new file mode 100644 index 0000000000..3c19ef3da6 --- /dev/null +++ b/meta/conf/machine/include/zaurus-clamshell-2.6.conf @@ -0,0 +1,46 @@ +# Zaurus Clamshell specific configuration for kernel 2.6 +# Don't forget to include zaurus-clamshell.conf as well + +PREFERRED_PROVIDER_virtual/kernel = "linux-openzaurus" +PREFERRED_VERSION_wpa_supplicant = "0.4.7" + +PCMCIA_MANAGER ?= "pcmciautils" + +BOOTSTRAP_EXTRA_RDEPENDS += "kernel udev sysfsutils spectrum-fw \ +${PCMCIA_MANAGER} apm wireless-tools irda-utils udev-utils keymaps hostap-utils prism3-firmware prism3-support \ +ppp ppp-dialin openswan wpa-supplicant-nossl alsa-utils-alsactl alsa-utils-alsamixer module-init-tools alsa-conf zaurusd" + +# Ethernet modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-pcnet-cs" +# NFS Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-nfs kernel-module-lockd kernel-module-sunrpc" +# Crypto Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-des kernel-module-md5" +# SMB and CRAMFS +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-smbfs kernel-module-cramfs" +# Serial Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-8250 kernel-module-serial-cs" +# Bluetooth Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-bluetooth kernel-module-l2cap kernel-module-rfcomm kernel-module-hci-vhci \ + kernel-module-bnep kernel-module-hidp kernel-module-hci-uart kernel-module-sco \ + kernel-module-bt3c-cs kernel-module-bluecard-cs kernel-module-btuart-cs kernel-module-dtl1-cs" +# Infrared Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-pxaficp-ir kernel-module-irda kernel-module-ircomm \ + kernel-module-ircomm-tty kernel-module-irlan kernel-module-irnet kernel-module-ir-usb" + +# USB Gadget Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-gadgetfs kernel-module-g-file-storage \ + kernel-module-g-serial kernel-module-g-ether" + +# Wireless Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-hostap kernel-module-hostap-cs \ + kernel-module-hermes kernel-module-orinoco \ + kernel-module-orinoco-cs kernel-module-spectrum-cs \ + hostap-conf orinoco-conf" + +# Sound Modules +BOOTSTRAP_EXTRA_RDEPENDS_append_c7x0 = " kernel-module-snd-soc-corgi " +BOOTSTRAP_EXTRA_RDEPENDS_append_akita = " kernel-module-snd-soc-spitz " +BOOTSTRAP_EXTRA_RDEPENDS_append_spitz = " kernel-module-snd-soc-spitz " +# For OSS +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-snd-mixer-oss kernel-module-snd-pcm-oss"
\ No newline at end of file diff --git a/meta/conf/machine/include/zaurus-clamshell.conf b/meta/conf/machine/include/zaurus-clamshell.conf new file mode 100644 index 0000000000..dfbbe5024e --- /dev/null +++ b/meta/conf/machine/include/zaurus-clamshell.conf @@ -0,0 +1,29 @@ +TARGET_ARCH = "arm" +IPKG_EXTRA_ARCHS = "armv4 armv5te" + +PREFERRED_PROVIDER_xserver = "xserver-kdrive" + +EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x4000 -n" +EXTRA_IMAGEDEPENDS += "sharp-flash-header-c700 zaurus-updater" + +IMAGE_CMD_jffs2 = "mkfs.jffs2 --root=${IMAGE_ROOTFS} --faketime \ + --output=${T}/${IMAGE_NAME}.rootfs.jffs2 ${EXTRA_IMAGECMD}; \ + cat ${STAGING_LIBDIR}/sharp-flash-header/header-c700.bin \ + ${T}/${IMAGE_NAME}.rootfs.jffs2 > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.img" + +# add a summary to the jffs2 file to make it mount a lot faster +#EXTRA_IMAGECMD_jffs2 += "&& sumtool -i ${T}/${IMAGE_NAME}.rootfs.jffs2 \ +# -o ${T}/${IMAGE_NAME}.rootfs.jffs2.summary \ +# --eraseblock=0x4000" +#IMAGE_CMD_jffs2 += "; cat ${STAGING_LIBDIR}/sharp-flash-header/header-c700.bin \ +# ${T}/${IMAGE_NAME}.rootfs.jffs2.summary > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.summary.img" + +GUI_MACHINE_CLASS = "bigscreen" +GPE_EXTRA_INSTALL += "gaim sylpheed" + +include conf/machine/include/handheld-common.conf + +# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm. +include conf/machine/include/tune-xscale.conf + +SERIAL_CONSOLE = "115200 ttyS0" diff --git a/meta/conf/machine/ipaq-pxa270.conf b/meta/conf/machine/ipaq-pxa270.conf new file mode 100644 index 0000000000..f5cc893c9c --- /dev/null +++ b/meta/conf/machine/ipaq-pxa270.conf @@ -0,0 +1,63 @@ +#@TYPE: Machine +#@NAME: iPAQ hx47xx hx2xxx +#@DESCRIPTION: Machine configuration for the iPAQ with a pxa27x CPU devices + +TARGET_ARCH = "arm" +IPKG_EXTRA_ARCHS = "armv4 armv5te ipaqpxa hx4700" +#use this for a hx47xx ipaq +PREFERRED_PROVIDER_virtual/kernel = "handhelds-pxa-2.6" + +#use this for a hx2xxx ipaq +#PREFERRED_PROVIDER_virtual/kernel = "linux-openzaurus" + +PREFERRED_VERSION_orinoco-modules = "0.15rc1" + +ROOT_FLASH_SIZE = "80" + +EXTRA_IMAGECMD_jffs2 = "; sumtool -i ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 \ + -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs-summary.jffs2 \ + -e 256KiB -p" + +MODUTILS = "26" +PCMCIA_MANAGER = "pcmciautils" +BOOTSTRAP_EXTRA_RDEPENDS = "kernel ipaq-boot-params " +BOOTSTRAP_EXTRA_RRECOMMENDS += "${@linux_module_packages('${PXA270_MODULES}', d)}" +BOOTSTRAP_EXTRA_RDEPENDS_append = " udev module-init-tools" + +PXA270_MODULES = "g_ether g_file_storage g_serial gadgetfs pxa27x_udc \ + snd_pcm_oss snd_mixer_oss evdev mmc_block pcmcia hidp \ + nls_cp437 nls_iso8859-1 nls_utf8 af_key" + +SERIAL_CONSOLE = "115200 ttyS0" + +include conf/machine/include/handheld-common.conf + +GUI_MACHINE_CLASS = "bigscreen" + +# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm. +include conf/machine/include/tune-xscale.conf + +# Uncomment this to use iwmmxt optimizations. Remove the above xscale stuff first +#include conf/machine/include/tune-iwmmxt.conf + +BOOTSTRAP_EXTRA_RRECOMMENDS += "${@linux_module_packages('${HX4700_MODULES}', d)}" +HX4700_MODULES = "i2c-pxa asic3_mmc hx4700_bt hx4700_leds hx4700_navpt hx4700_pcmcia \ + hx4700_ts hx4700_wlan snd_hx4700_audio hx4700_power" + + +module_autoload_evdev = "evdev" +module_autoload_hx4700_power = "hx4700_power" +module_autoload_pcmcia = "pcmcia" +module_autoload_hx4700_pcmcia = "hx4700_pcmcia" +module_autoload_asic3_mmc = "asic3_mmc" +module_autoload_mmc_block = "mmc_block" +module_autoload_hx4700_ts = "hx4700_ts" +module_autoload_hx4700_navpt = "hx4700_navpt" +module_autoload_hx4700_bt = "hx4700_bt" +module_autoload_snd-hx4700_audio = "snd-hx4700_audio" +module_autoload_snd-pcm-oss = "snd-pcm-oss" +module_autoload_snd-mixer-oss = "snd-mixer-oss" +module_autoload_pxa27x_udc = "pxa27x_udc" + +#FIXME: this should be controlled by a userspace utility later. +module_autoload_g_ether = "g_ether" diff --git a/meta/conf/machine/jornada7xx.conf b/meta/conf/machine/jornada7xx.conf new file mode 100644 index 0000000000..e8218138d5 --- /dev/null +++ b/meta/conf/machine/jornada7xx.conf @@ -0,0 +1,7 @@ +#@TYPE: Machine +#@NAME: HP Jornada 7xx +#@DESCRIPTION: Machine configuration for the SA1100 based HP Jornada 7xx palmtop computer + +TARGET_ARCH = "arm" + +include conf/machine/include/tune-strongarm.conf
\ No newline at end of file diff --git a/meta/conf/machine/nokia770.conf b/meta/conf/machine/nokia770.conf new file mode 100644 index 0000000000..bf893660d4 --- /dev/null +++ b/meta/conf/machine/nokia770.conf @@ -0,0 +1,54 @@ +#@TYPE: Machine +#@NAME: Nokia 770 internet tablet +#@DESCRIPTION: Machine configuration for the Nokia 770, an omap 1710 based tablet +TARGET_ARCH = "arm" +IPKG_EXTRA_ARCHS = "armv4 armv5te" + +PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive-omap" +PREFERRED_PROVIDER_virtual/bootloader = "" +PREFERRED_PROVIDER_tslib = "tslib-maemo" + +XSERVER = "xserver-kdrive-omap" + +# 800x480 is big enough for me +GUI_MACHINE_CLASS = "bigscreen" +GPE_EXTRA_INSTALL += "gaim sylpheed gpe-mini-browser tscalib" + +# Use tune-arm926 per default. Machine independent feeds should be built with tune-strongarm. +include conf/machine/include/tune-arm926ejs.conf + + +#size of the root partition (yes, it is 123 MB) +ROOT_FLASH_SIZE = "123" +EXTRA_IMAGECMD_jffs2_nokia770 = "--pad --little-endian --eraseblock=0x20000" + +# serial console port on devboard rev. B3 +SERIAL_CONSOLE = "115200 ttyS0" + +PREFERRED_PROVIDER_virtual/kernel = "linux-nokia770" + +BOOTSTRAP_EXTRA_RDEPENDS += "sysfsutils nokia770-init \ +${PCMCIA_MANAGER} apm ppp wireless-tools console-tools" + +# NFS Modules +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-nfs kernel-module-lockd kernel-module-sunrpc" +# Crypto Modules +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-des kernel-module-md5" +# SMB and CRAMFS +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-smbfs kernel-module-cramfs" +# Serial Modules +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-8250 " +# Bluetooth Modules +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-bluetooth kernel-module-l2cap kernel-module-rfcomm kernel-module-hci-vhci \ +# kernel-module-bnep kernel-module-hidp kernel-module-hci-uart kernel-module-sco" +# PPP Modules +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-ppp-generic kernel-module-ppp-async" + +#USB Gadget Modules +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-gadgetfs kernel-module-g-file-storage kernel-module-g-serial \ +# kernel-module-g-ether" + +ROOTFS_POSTPROCESS_COMMAND += " remove_init_link; " + +include conf/machine/include/handheld-common.conf + diff --git a/meta/conf/machine/qemuarm.conf b/meta/conf/machine/qemuarm.conf new file mode 100644 index 0000000000..3341efd1a7 --- /dev/null +++ b/meta/conf/machine/qemuarm.conf @@ -0,0 +1,46 @@ +#@TYPE: Machine +#@NAME: qemu ARM Emulator setup +#@DESCRIPTION: Machine configuration for running an ARM system under qemu emulation + +TARGET_ARCH = "arm" +IPKG_EXTRA_ARCHS = "armv4 armv5te" + +PCMCIA_MANAGER = "pcmciautils" +PREFERRED_PROVIDER_xserver = "xserver-kdrive" +GUI_MACHINE_CLASS = "bigscreen" +GPE_EXTRA_INSTALL += "gaim sylpheed" + +include conf/machine/include/handheld-common.conf +include conf/machine/include/tune-arm926ejs.conf + +SERIAL_CONSOLE = "115200 ttyAMA0" + +PREFERRED_PROVIDER_virtual/kernel = "linux-openzaurus" + +BOOTSTRAP_EXTRA_RDEPENDS += "kernel udev sysfsutils spectrum-fw \ +pcmciautils apm wireless-tools irda-utils udev-utils console-tools hostap-utils prism3-firmware prism3-support \ +ppp ppp-dialin openswan wpa-supplicant-nossl alsa-utils-alsactl alsa-utils-alsamixer module-init-tools alsa-conf" + +# Ethernet modules +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-pcnet-cs" +# NFS Modules +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-nfs kernel-module-lockd kernel-module-sunrpc" +# Crypto Modules +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-des kernel-module-md5" +# SMB and CRAMFS +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-smbfs kernel-module-cramfs" +# Serial Modules +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-8250 kernel-module-serial-cs" +# Bluetooth Modules +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-bluetooth kernel-module-l2cap kernel-module-rfcomm kernel-module-hci-vhci \ +# kernel-module-bnep kernel-module-hidp kernel-module-hci-uart kernel-module-sco \ +# kernel-module-bt3c-cs kernel-module-bluecard-cs kernel-module-btuart-cs kernel-module-dtl1-cs" +# Infrared Modules +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-irda kernel-module-ircomm \ +# kernel-module-ircomm-tty kernel-module-irlan kernel-module-irnet kernel-module-ir-usb" + +IMAGE_FSTYPES = "tar.bz2" + +ROOT_FLASH_SIZE = "100" +# actually that should really read ROOTFS_SIZE = "100", because with modern kernels, +# we boot from the built-in harddisk in C3000. ROOT_FLASH_SIZE is really 5 MegaByte diff --git a/meta/conf/machine/spitz.conf b/meta/conf/machine/spitz.conf new file mode 100644 index 0000000000..f78dd7a3b9 --- /dev/null +++ b/meta/conf/machine/spitz.conf @@ -0,0 +1,18 @@ +#@TYPE: Machine +#@NAME: Sharp Zaurus SL-C3000 +#@DESCRIPTION: Machine configuration for the Sharp Zaurus SL-C3000 device + +include conf/machine/include/zaurus-clamshell.conf +include conf/machine/include/zaurus-clamshell-2.6.conf + +PIVOTBOOT_EXTRA_RDEPENDS += "pivotinit ${PCMCIA_MANAGER}" +PIVOTBOOT_EXTRA_RRECOMMENDS += "" + +# Useful things for the built-in Harddisk +BOOTSTRAP_EXTRA_RDEPENDS += "hdparm e2fsprogs e2fsprogs-e2fsck e2fsprogs-mke2fs" + +IMAGE_FSTYPES = "jffs2 tar.gz" + +ROOT_FLASH_SIZE = "100" +# actually that should really read ROOTFS_SIZE = "100", because with modern kernels, +# we boot from the built-in harddisk in C3000. ROOT_FLASH_SIZE is really 5 MegaByte |