diff options
Diffstat (limited to 'meta/classes/testimage.bbclass')
| -rw-r--r-- | meta/classes/testimage.bbclass | 121 |
1 files changed, 104 insertions, 17 deletions
diff --git a/meta/classes/testimage.bbclass b/meta/classes/testimage.bbclass index 73cd375dcb..78da4b09bd 100644 --- a/meta/classes/testimage.bbclass +++ b/meta/classes/testimage.bbclass @@ -3,6 +3,8 @@ # Released under the MIT license (see COPYING.MIT) inherit metadata_scm +inherit image-artifact-names + # testimage.bbclass enables testing of qemu images using python unittests. # Most of the tests are commands run on target image over ssh. # To use it add testimage to global inherit and call your target image with -c testimage @@ -31,7 +33,20 @@ TESTIMAGE_AUTO ??= "0" # TEST_LOG_DIR contains a command ssh log and may contain infromation about what command is running, output and return codes and for qemu a boot log till login. # Booting is handled by this class, and it's not a test in itself. # TEST_QEMUBOOT_TIMEOUT can be used to set the maximum time in seconds the launch code will wait for the login prompt. +# TEST_OVERALL_TIMEOUT can be used to set the maximum time in seconds the tests will be allowed to run (defaults to no limit). # TEST_QEMUPARAMS can be used to pass extra parameters to qemu, e.g. "-m 1024" for setting the amount of ram to 1 GB. +# TEST_RUNQEMUPARAMS can be used to pass extra parameters to runqemu, e.g. "gl" to enable OpenGL acceleration. + +# TESTIMAGE_BOOT_PATTERNS can be used to override certain patterns used to communicate with the target when booting, +# if a pattern is not specifically present on this variable a default will be used when booting the target. +# TESTIMAGE_BOOT_PATTERNS[<flag>] overrides the pattern used for that specific flag, where flag comes from a list of accepted flags +# e.g. normally the system boots and waits for a login prompt (login:), after that it sends the command: "root\n" to log as the root user +# if we wanted to log in as the hypothetical "webserver" user for example we could set the following: +# TESTIMAGE_BOOT_PATTERNS = "send_login_user search_login_succeeded" +# TESTIMAGE_BOOT_PATTERNS[send_login_user] = "webserver\n" +# TESTIMAGE_BOOT_PATTERNS[search_login_succeeded] = "webserver@[a-zA-Z0-9\-]+:~#" +# The accepted flags are the following: search_reached_prompt, send_login_user, search_login_succeeded, search_cmd_finished. +# They are prefixed with either search/send, to differentiate if the pattern is meant to be sent or searched to/from the target terminal TEST_LOG_DIR ?= "${WORKDIR}/testimage" @@ -45,7 +60,7 @@ BASICTESTSUITE = "\ ping date df ssh scp python perl gi ptest parselogs \ logrotate connman systemd oe_syslog pam stap ldd xorg \ kernelmodule gcc buildcpio buildlzip buildgalculator \ - dnf rpm opkg apt" + dnf rpm opkg apt weston" DEFAULT_TEST_SUITES = "${BASICTESTSUITE}" @@ -63,8 +78,12 @@ DEFAULT_TEST_SUITES_remove_qemumips64 = "${MIPSREMOVE}" TEST_SUITES ?= "${DEFAULT_TEST_SUITES}" TEST_QEMUBOOT_TIMEOUT ?= "1000" +TEST_OVERALL_TIMEOUT ?= "" TEST_TARGET ?= "qemu" TEST_QEMUPARAMS ?= "" +TEST_RUNQEMUPARAMS ?= "" + +TESTIMAGE_BOOT_PATTERNS ?= "" TESTIMAGEDEPENDS = "" TESTIMAGEDEPENDS_append_qemuall = " qemu-native:do_populate_sysroot qemu-helper-native:do_populate_sysroot qemu-helper-native:do_addto_recipe_sysroot" @@ -77,7 +96,7 @@ TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'deb', 'apt-native:do TESTIMAGELOCK = "${TMPDIR}/testimage.lock" TESTIMAGELOCK_qemuall = "" -TESTIMAGE_DUMP_DIR ?= "/tmp/oe-saved-tests/" +TESTIMAGE_DUMP_DIR ?= "${LOG_DIR}/runtime-hostdump/" TESTIMAGE_UPDATE_VARS ?= "DL_DIR WORKDIR DEPLOY_DIR" @@ -148,6 +167,29 @@ def get_testimage_json_result_dir(d): def get_testimage_result_id(configuration): return '%s_%s_%s_%s' % (configuration['TEST_TYPE'], configuration['IMAGE_BASENAME'], configuration['MACHINE'], configuration['STARTTIME']) +def get_testimage_boot_patterns(d): + from collections import defaultdict + boot_patterns = defaultdict(str) + # Only accept certain values + accepted_patterns = ['search_reached_prompt', 'send_login_user', 'search_login_succeeded', 'search_cmd_finished'] + # Not all patterns need to be overriden, e.g. perhaps we only want to change the user + boot_patterns_flags = d.getVarFlags('TESTIMAGE_BOOT_PATTERNS') or {} + if boot_patterns_flags: + patterns_set = [p for p in boot_patterns_flags.items() if p[0] in d.getVar('TESTIMAGE_BOOT_PATTERNS').split()] + for flag, flagval in patterns_set: + if flag not in accepted_patterns: + bb.fatal('Testimage: The only accepted boot patterns are: search_reached_prompt,send_login_user, \ + search_login_succeeded,search_cmd_finished\n Make sure your TESTIMAGE_BOOT_PATTERNS=%s \ + contains an accepted flag.' % d.getVar('TESTIMAGE_BOOT_PATTERNS')) + return + # We know boot prompt is searched through in binary format, others might be expressions + if flag == 'search_reached_prompt': + boot_patterns[flag] = flagval.encode() + else: + boot_patterns[flag] = flagval.encode().decode('unicode-escape') + return boot_patterns + + def testimage_main(d): import os import json @@ -166,7 +208,11 @@ def testimage_main(d): """ Catch SIGTERM from worker in order to stop qemu. """ - raise RuntimeError + os.kill(os.getpid(), signal.SIGINT) + + def handle_test_timeout(timeout): + bb.warn("Global test timeout reached (%s seconds), stopping the tests." %(timeout)) + os.kill(os.getpid(), signal.SIGINT) testimage_sanity(d) @@ -205,10 +251,14 @@ def testimage_main(d): if d.getVar("TEST_TARGET") == "qemu": fstypes = [fs for fs in fstypes if fs in supported_fstypes] if not fstypes: - bb.fatal('Unsupported image type built. Add a comptible image to ' + bb.fatal('Unsupported image type built. Add a compatible image to ' 'IMAGE_FSTYPES. Supported types: %s' % ', '.join(supported_fstypes)) - rootfs = '%s.%s' % (image_name, fstypes[0]) + qfstype = fstypes[0] + qdeffstype = d.getVar("QB_DEFAULT_FSTYPE") + if qdeffstype: + qfstype = qdeffstype + rootfs = '%s.%s' % (image_name, qfstype) # Get tmpdir (not really used, just for compatibility) tmpdir = d.getVar("TMPDIR") @@ -233,11 +283,14 @@ def testimage_main(d): # Get use_kvm kvm = oe.types.qemu_use_kvm(d.getVar('QEMU_USE_KVM'), d.getVar('TARGET_ARCH')) + # Get OVMF + ovmf = d.getVar("QEMU_USE_OVMF") + slirp = False if d.getVar("QEMU_USE_SLIRP"): slirp = True - # TODO: We use the current implementatin of qemu runner because of + # TODO: We use the current implementation of qemu runner because of # time constrains, qemu runner really needs a refactor too. target_kwargs = { 'machine' : machine, 'rootfs' : rootfs, @@ -249,12 +302,37 @@ def testimage_main(d): 'bootlog' : bootlog, 'kvm' : kvm, 'slirp' : slirp, + 'dump_dir' : d.getVar("TESTIMAGE_DUMP_DIR"), + 'serial_ports': len(d.getVar("SERIAL_CONSOLES").split()), + 'ovmf' : ovmf, } + if d.getVar("TESTIMAGE_BOOT_PATTERNS"): + target_kwargs['boot_patterns'] = get_testimage_boot_patterns(d) + # TODO: Currently BBPATH is needed for custom loading of targets. # It would be better to find these modules using instrospection. target_kwargs['target_modules_path'] = d.getVar('BBPATH') + # hardware controlled targets might need further access + target_kwargs['powercontrol_cmd'] = d.getVar("TEST_POWERCONTROL_CMD") or None + target_kwargs['powercontrol_extra_args'] = d.getVar("TEST_POWERCONTROL_EXTRA_ARGS") or "" + target_kwargs['serialcontrol_cmd'] = d.getVar("TEST_SERIALCONTROL_CMD") or None + target_kwargs['serialcontrol_extra_args'] = d.getVar("TEST_SERIALCONTROL_EXTRA_ARGS") or "" + target_kwargs['testimage_dump_target'] = d.getVar("testimage_dump_target") or "" + + def export_ssh_agent(d): + import os + + variables = ['SSH_AGENT_PID', 'SSH_AUTH_SOCK'] + for v in variables: + if v not in os.environ.keys(): + val = d.getVar(v) + if val is not None: + os.environ[v] = val + + export_ssh_agent(d) + # runtime use network for download projects for build export_proxies(d) @@ -289,32 +367,41 @@ def testimage_main(d): package_extraction(d, tc.suites) results = None + complete = False orig_sigterm_handler = signal.signal(signal.SIGTERM, sigterm_exception) try: # We need to check if runqemu ends unexpectedly # or if the worker send us a SIGTERM - tc.target.start(params=d.getVar("TEST_QEMUPARAMS")) + tc.target.start(params=d.getVar("TEST_QEMUPARAMS"), runqemuparams=d.getVar("TEST_RUNQEMUPARAMS")) + import threading + try: + threading.Timer(int(d.getVar("TEST_OVERALL_TIMEOUT")), handle_test_timeout, (int(d.getVar("TEST_OVERALL_TIMEOUT")),)).start() + except ValueError: + pass results = tc.runTests() - except (RuntimeError, BlockingIOError) as err: - if isinstance(err, RuntimeError): - bb.error('testimage received SIGTERM, shutting down...') + complete = True + except (KeyboardInterrupt, BlockingIOError) as err: + if isinstance(err, KeyboardInterrupt): + bb.error('testimage interrupted, shutting down...') else: bb.error('runqemu failed, shutting down...') if results: results.stop() - results = None + results = tc.results finally: signal.signal(signal.SIGTERM, orig_sigterm_handler) tc.target.stop() # Show results (if we have them) - if not results: + if results: + configuration = get_testimage_configuration(d, 'runtime', machine) + results.logDetails(get_testimage_json_result_dir(d), + configuration, + get_testimage_result_id(configuration), + dump_streams=d.getVar('TESTREPORT_FULLLOGS')) + results.logSummary(pn) + if not results or not complete: bb.fatal('%s - FAILED - tests were interrupted during execution' % pn, forcelog=True) - configuration = get_testimage_configuration(d, 'runtime', machine) - results.logDetails(get_testimage_json_result_dir(d), - configuration, - get_testimage_result_id(configuration)) - results.logSummary(pn) if not results.wasSuccessful(): bb.fatal('%s - FAILED - check the task log and the ssh log' % pn, forcelog=True) |