poky-qemu: integrate userspace nfsroot support

This is the first phase of some refactoring the poky-qemu control
scripts are getting. This integrates userspace nfsroot support into
poky-qemu, making runqemu-nfs obsolete.

This fixes [BUGID #295]

Signed-off-by: Scott Garman <scott.a.garman@intel.com>

1 files changed, 117 insertions, 136 deletions

diff --git a/scripts/poky-qemu-internal b/scripts/poky-qemu-internal
index 30e90df0b6..c65e0f1de2 100755
--- a/scripts/poky-qemu-internal
+++ b/scripts/poky-qemu-internal
@@ -17,7 +17,6 @@
 # with this program; if not, write to the Free Software Foundation, Inc.,
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 
-
 # Call setting:
 #   QEMU_MEMORY (optional) - set the amount of memory in the emualted system.
 #   SERIAL_LOGFILE (optional) - log the serial port output to a file
@@ -25,35 +24,37 @@
 #
 # Image options:
 #   MACHINE - the machine to run
-#   TYPE - the image type to run
-#   ZIMAGE - the kernel image file to use
-#   HDIMAGE - the disk image file to use
+#   FSTYPE - the image type to run
+#   KERNEL - the kernel image file to use
+#   ROOTFS - the disk image file to use
 #
 
 if [ -z "$QEMU_MEMORY" ]; then
-	case "$MACHINE" in
-		"qemux86")
-			QEMU_MEMORY="128M"
-			;;
-		"qemux86-64")
-			QEMU_MEMORY="128M"
-			;;
-		"qemumips")
-			QEMU_MEMORY="128M"
-			;;
-		"qemuppc")
-			QEMU_MEMORY="128M"
-			;;
-		*)
-			QEMU_MEMORY="64M"
-			;;
-	esac
+    case "$MACHINE" in
+        "qemux86")
+            QEMU_MEMORY="128M"
+            ;;
+        "qemux86-64")
+            QEMU_MEMORY="128M"
+            ;;
+        "qemumips")
+            QEMU_MEMORY="128M"
+            ;;
+        "qemuppc")
+            QEMU_MEMORY="128M"
+            ;;
+        *)
+            QEMU_MEMORY="64M"
+            ;;
+    esac
 
 fi
 
 QEMUIFUP=`which poky-qemu-ifup`
 QEMUIFDOWN=`which poky-qemu-ifdown`
 
+NFSRUNNING="false"
+
 LOCKDIR="/tmp/qemu-tap-locks"
 [ ! -d "$LOCKDIR" ] && mkdir $LOCKDIR
 
@@ -63,8 +64,8 @@ LOCKFILE=""
 for tap in $POSSIBLE; do
     LOCKFILE="$LOCKDIR/$tap"
     if lockfile -2 -r 1 $LOCKFILE; then
-	TAP=$tap
-	break;
+        TAP=$tap
+        break;
     fi 
 done
 
@@ -79,8 +80,7 @@ if [ "$TAP" = "" ]; then
     fi
     LOCKFILE="$LOCKDIR/$tap"
     if lockfile $LOCKFILE; then
-	TAP=$tap
-	break;
+        TAP=$tap
     fi 
 else
     echo "Using preconfigured tap device '$TAP'"
@@ -93,6 +93,12 @@ release_lock() {
         echo "Releasing lockfile of preconfigured tap device '$TAP'"
         rm -f $LOCKFILE
     fi
+
+    if [ "$NFSRUNNING" = "true" ]; then
+        echo "Shutting down the userspace NFS server:"
+        echo "poky-export-rootfs stop $ROOTFS"
+        poky-export-rootfs stop $ROOTFS
+    fi
 }
 
 n1=$[ (`echo $TAP | sed 's/tap//'` * 2) + 1 ]
@@ -110,44 +116,62 @@ if [ "x$SERIAL_LOGFILE" != "x" ]; then
 fi
 
 case "$MACHINE" in
-	"qemuarm") ;;
-	"qemumips") ;;
-	"qemuppc") ;;
-	"qemuarmv6") ;;
-	"qemuarmv7") ;;
-	"qemux86") ;;
-        "qemux86-64") ;;
-	"akita") ;;
-	"spitz") ;;
-	"nokia800") ;;
-	"nokia800-maemo") ;;
-	*)
-		echo "Error: Unsupported machine type $MACHINE"
-		return
-		;;
+    "qemuarm") ;;
+    "qemumips") ;;
+    "qemuppc") ;;
+    "qemuarmv6") ;;
+    "qemuarmv7") ;;
+    "qemux86") ;;
+    "qemux86-64") ;;
+    "akita") ;;
+    "spitz") ;;
+    *)
+        echo "Error: Unsupported machine type $MACHINE"
+        return
+    ;;
 esac
 
-if [ "$TYPE" != "nfs" -a ! -f "$HDIMAGE" ]; then
-    echo "Error: Image file $HDIMAGE doesn't exist"
+if [ ! -f "$KERNEL" ]; then
+    echo "Error: Kernel image file $KERNEL doesn't exist"
     release_lock
     return
 fi
 
-if [ "$TYPE" = "nfs" ]; then
+if [ "$FSTYPE" != "nfs" -a ! -f "$ROOTFS" ]; then
+    echo "Error: Image file $ROOTFS doesn't exist"
+    release_lock
+    return
+fi
+
+if [ "$FSTYPE" = "nfs" ]; then
     NFS_SERVER="192.168.7.1"
-    NFS_DIR=`echo $HDIMAGE | sed 's/^[^:]*:\(.*\)/\1/'`
+    NFS_DIR=`echo $ROOTFS | sed 's/^[^:]*:\(.*\)/\1/'`
     UNFS_OPTS="nfsvers=2,mountprog=21111,nfsprog=11111,udp"
+
+    PSEUDO_LOCALSTATEDIR=~/.poky-sdk/pseudo
+    export PSEUDO_LOCALSTATEDIR
+
+    rpcbind_running=`ps ax | grep rpcbind | grep -v grep | wc -l`
+    portmap_running=`ps ax | grep portmap | grep -v grep | wc -l`
+    if [[ $rpcbind_running == 0 && $portmap_running == 0 ]]; then
+        echo "You need to be running either rpcbind or portmap to continue"
+        release_lock
+        return
+    fi
+
+    # Start the userspace NFS server
+    echo "poky-export-rootfs restart $ROOTFS"
+    poky-export-rootfs restart $ROOTFS
+    if [ $? != 0 ]; then
+        release_lock
+        return
+    fi
+    NFSRUNNING="true"
 fi
 
 if [ "$NFS_SERVER" = "" ]; then
     NFS_SERVER="192.168.7.1"
-    NFS_DIR=$HDIMAGE
-fi
-
-if [ ! -f "$ZIMAGE" ]; then
-    echo "Error: Kernel image file $ZIMAGE doesn't exist"
-    release_lock
-    return
+    NFS_DIR=$ROOTFS
 fi
 
 if [ "$MACHINE" = "qemuarm" -o "$MACHINE" = "qemuarmv6" -o "$MACHINE" = "qemuarmv7" ]; then
@@ -162,37 +186,37 @@ if [ "$MACHINE" = "qemuarm" -o "$MACHINE" = "qemuarmv6" -o "$MACHINE" = "qemuarm
     MACHINE_SUBTYPE=versatilepb
     QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS"
     # QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS -force-pointer"
-    if [ "$TYPE" = "ext3" ]; then
+    if [ "$FSTYPE" = "ext3" ]; then
         KERNCMDLINE="root=/dev/sda console=ttyAMA0,115200 console=tty $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY highres=off"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -M versatilepb -hda $HDIMAGE -no-reboot $QEMU_UI_OPTIONS"
+        QEMUOPTIONS="$QEMU_NETWORK_CMD -M versatilepb -hda $ROOTFS -no-reboot $QEMU_UI_OPTIONS"
     fi
-    if [ "$TYPE" = "nfs" ]; then
+    if [ "$FSTYPE" = "nfs" ]; then
         if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
-            echo "Error: NFS mount point $HDIMAGE doesn't exist"
+            echo "Error: NFS mount point $ROOTFS doesn't exist"
             release_lock
             return
         fi
         KERNCMDLINE="root=/dev/nfs nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
         QEMUOPTIONS="$QEMU_NETWORK_CMD -M versatilepb --no-reboot $QEMU_UI_OPTIONS"
     fi
-	if [ "$MACHINE" = "qemuarmv6" ]; then
-		QEMUOPTIONS="$QEMUOPTIONS -cpu arm1136"
-	fi
-	if [ "$MACHINE" = "qemuarmv7" ]; then
-		QEMUOPTIONS="$QEMUOPTIONS -cpu cortex-a8"
-	fi
+    if [ "$MACHINE" = "qemuarmv6" ]; then
+        QEMUOPTIONS="$QEMUOPTIONS -cpu arm1136"
+    fi
+    if [ "$MACHINE" = "qemuarmv7" ]; then
+        QEMUOPTIONS="$QEMUOPTIONS -cpu cortex-a8"
+    fi
 fi
 
 if [ "$MACHINE" = "qemux86" ]; then
     QEMU=qemu
     QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS -vga vmware -enable-gl"
-    if [ "$TYPE" = "ext3" ]; then
+    if [ "$FSTYPE" = "ext3" ]; then
         KERNCMDLINE="vga=0 root=/dev/hda mem=$QEMU_MEMORY $KERNEL_NETWORK_CMD"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -hda $HDIMAGE $QEMU_UI_OPTIONS"
+        QEMUOPTIONS="$QEMU_NETWORK_CMD -hda $ROOTFS $QEMU_UI_OPTIONS"
     fi
-    if [ "$TYPE" = "nfs" ]; then
+    if [ "$FSTYPE" = "nfs" ]; then
         if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
-            echo "Error: NFS mount point $HDIMAGE doesn't exist."
+            echo "Error: NFS mount point $ROOTFS doesn't exist."
             release_lock
             return
         fi
@@ -204,16 +228,16 @@ fi
 if [ "$MACHINE" = "qemux86-64" ]; then
     QEMU=qemu-system-x86_64
     QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS -vga vmware -enable-gl"
-    if [ "$TYPE" = "ext3" ]; then
+    if [ "$FSTYPE" = "ext3" ]; then
         KERNCMDLINE="vga=0 root=/dev/hda mem=$QEMU_MEMORY $KERNEL_NETWORK_CMD"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -hda $HDIMAGE $QEMU_UI_OPTIONS"
+        QEMUOPTIONS="$QEMU_NETWORK_CMD -hda $ROOTFS $QEMU_UI_OPTIONS"
     fi
-    if [ "$TYPE" = "nfs" ]; then
-        if [ "x$HDIMAGE" = "x" ]; then
-            HDIMAGE=/srv/nfs/qemux86-64
+    if [ "$FSTYPE" = "nfs" ]; then
+        if [ "x$ROOTFS" = "x" ]; then
+            ROOTFS=/srv/nfs/qemux86-64
         fi
-        if [ ! -d "$HDIMAGE" ]; then
-            echo "Error: NFS mount point $HDIMAGE doesn't exist."
+        if [ ! -d "$ROOTFS" ]; then
+            echo "Error: NFS mount point $ROOTFS doesn't exist."
             release_lock
             return
         fi
@@ -224,15 +248,15 @@ fi
 
 if [ "$MACHINE" = "spitz" ]; then
     QEMU=qemu-system-arm
-    if [ "$TYPE" = "ext3" ]; then
-        echo $HDIMAGE
-        HDIMAGE=`readlink -f $HDIMAGE`
-        echo $HDIMAGE
-        if [ ! -e "$HDIMAGE.qemudisk" ]; then
+    if [ "$FSTYPE" = "ext3" ]; then
+        echo $ROOTFS
+        ROOTFS=`readlink -f $ROOTFS`
+        echo $ROOTFS
+        if [ ! -e "$ROOTFS.qemudisk" ]; then
             echo "Adding a partition table to the ext3 image for use by QEMU, please wait..."
-            poky-addptable2image $HDIMAGE $HDIMAGE.qemudisk
+            poky-addptable2image $ROOTFS $ROOTFS.qemudisk
         fi
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -M spitz -hda $HDIMAGE.qemudisk -portrait"
+        QEMUOPTIONS="$QEMU_NETWORK_CMD -M spitz -hda $ROOTFS.qemudisk -portrait"
     fi
 fi
 
@@ -243,11 +267,11 @@ if [ "$MACHINE" = "qemumips" ]; then
     if [ "$TYPE" = "ext3" ]; then
         #KERNCMDLINE="root=/dev/hda console=ttyS0 console=tty0 $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
         KERNCMDLINE="root=/dev/hda console=ttyS0 console=tty $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -M $MACHINE_SUBTYPE -hda $HDIMAGE -no-reboot $QEMU_UI_OPTIONS"
+        QEMUOPTIONS="$QEMU_NETWORK_CMD -M $MACHINE_SUBTYPE -hda $ROOTFS -no-reboot $QEMU_UI_OPTIONS"
     fi
-    if [ "$TYPE" = "nfs" ]; then
+    if [ "$FSTYPE" = "nfs" ]; then
         if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
-            echo "Error: NFS mount point $HDIMAGE doesn't exist"
+            echo "Error: NFS mount point $ROOTFS doesn't exist"
             release_lock
             return
         fi
@@ -262,13 +286,13 @@ if [ "$MACHINE" = "qemuppc" ]; then
     CPU_SUBTYPE=603e
     BIOS=powerpc_rom.bin
     QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS -nographic"
-    if [ "$TYPE" = "ext3" ]; then
+    if [ "$FSTYPE" = "ext3" ]; then
         KERNCMDLINE="root=/dev/hda console=ttyS0 console=tty0 $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE -M $MACHINE_SUBTYPE -bios $BIOS -hda $HDIMAGE -no-reboot $QEMU_UI_OPTIONS"
+        QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE -M $MACHINE_SUBTYPE -bios $BIOS -hda $ROOTFS -no-reboot $QEMU_UI_OPTIONS"
     fi
-    if [ "$TYPE" = "nfs" ]; then
+    if [ "$FSTYPE" = "nfs" ]; then
         if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
-            echo "Error: NFS mount point $HDIMAGE doesn't exist"
+            echo "Error: NFS mount point $ROOTFS doesn't exist"
             release_lock
             return
         fi
@@ -279,56 +303,13 @@ fi
 
 if [ "$MACHINE" = "akita" ]; then
     QEMU=qemu-system-arm
-    if [ "$TYPE" = "jffs2" ]; then
-        HDIMAGE=`readlink -f $HDIMAGE`
-        if [ ! -e "$HDIMAGE.qemuflash" ]; then
+    if [ "$FSTYPE" = "jffs2" ]; then
+        ROOTFS=`readlink -f $ROOTFS`
+        if [ ! -e "$ROOTFS.qemuflash" ]; then
             echo "Converting raw image into flash image format for use by QEMU, please wait..."
-	    raw2flash.akita < $HDIMAGE > $HDIMAGE.qemuflash
-        fi
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -M akita -mtdblock $HDIMAGE.qemuflash -portrait"
-    fi
-fi
-
-if [ "$MACHINE" = "nokia800" ]; then
-    QEMU=qemu-system-arm
-    if [ "$TYPE" = "jffs2" ]; then
-        HDIMAGE=`readlink -f $HDIMAGE`
-        if [ ! -e "$HDIMAGE.qemuflash" ]; then
-            echo "'Flashing' rootfs, please wait..."
-            poky-nokia800-flashutil $HDIMAGE $HDIMAGE.qemuflash 
-        fi
-	KERNCMDLINE="root=/dev/mtdblock4 rootfstype=jffs2"
-        QEMU_NETWORK_CMD="-net nic,model=usb,vlan=0 $QEMU_TAP_CMD"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -M n800 -mtdblock $HDIMAGE.qemuflash -serial vc -m 130 -serial vc -serial vc -serial vc -usb -usbdevice net:0"
-    fi
-fi
-
-if [ "$MACHINE" = "nokia800-maemo" ]; then
-    QEMU=qemu-system-arm
-    if [ "$TYPE" = "jffs2" ]; then
-        HDIMAGE=`readlink -f $HDIMAGE`
-        if [ ! -e "$HDIMAGE.qemuflash" ]; then
-            if [ ! -e "$HDIMAGE.initfs" ]; then
-                echo "Error, $HDIMAGE.initfs must exist!"
-                release_lock
-                return
-            fi
-            if [ ! -e "$HDIMAGE.config" ]; then
-                echo "Error, $HDIMAGE.config must exist!"
-                echo "To generate it, take an n800 and cat /dev/mtdblock1 > $HDIMAGE.config"
-                release_lock
-                return
-            fi
-            echo "'Flashing' config partition, please wait..."
-            poky-nokia800-flashutil $HDIMAGE.config $HDIMAGE.qemuflash config
-            echo "'Flashing' initfs, please wait..."
-            poky-nokia800-flashutil $HDIMAGE.initfs $HDIMAGE.qemuflash initfs
-            echo "'Flashing' rootfs, please wait..."
-            poky-nokia800-flashutil $HDIMAGE $HDIMAGE.qemuflash 
+        raw2flash.akita < $ROOTFS > $ROOTFS.qemuflash
         fi
-	KERNCMDLINE=""
-        QEMU_NETWORK_CMD="-net nic,model=usb,vlan=0 $QEMU_TAP_CMD"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -M n800 -mtdblock $HDIMAGE.qemuflash -serial vc -m 130 -serial vc -serial vc -serial vc -usb -usbdevice net:0 -show-cursor"
+        QEMUOPTIONS="$QEMU_NETWORK_CMD -M akita -mtdblock $ROOTFS.qemuflash -portrait"
     fi
 fi
 
@@ -384,8 +365,8 @@ else
 fi
 
 echo "Running $QEMU..."
-echo $QEMUBIN -kernel $ZIMAGE $QEMUOPTIONS $SERIALOPTS $* --append '"'$KERNCMDLINE'"'
-$QEMUBIN -kernel $ZIMAGE $QEMUOPTIONS $SERIALOPTS $* --append "$KERNCMDLINE" || /bin/true
+echo $QEMUBIN -kernel $KERNEL $QEMUOPTIONS $SERIALOPTS $* --append '"'$KERNCMDLINE'"'
+$QEMUBIN -kernel $KERNEL $QEMUOPTIONS $SERIALOPTS $* --append "$KERNCMDLINE" || /bin/true
 
 release_lock