yocto-project-qs: Updated the "Super User" section for no tarballs

Fixes [YOCTO #5368]

Partial fix for this issue.  This section had two options for
setting up the Source Directory (tarball and cloned repo).  I
removed the tarball option.

Also, I did some routine formatting as well as verified that
the example runs on a more recent Linux distro.  Previously, the
example was confirmed and stated that it ran on 10.04 Ubuntu.
Well, this distro is not even in the supported list any longer
so I ran it on a 12.04 Ubuntu machine and stated that.

(From yocto-docs rev: 1203e083ec8f7ac91bd832a27273ab4afc5aa4c8)

Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

1 files changed, 41 insertions, 37 deletions

diff --git a/documentation/yocto-project-qs/yocto-project-qs.xml b/documentation/yocto-project-qs/yocto-project-qs.xml
index 73da2903037..250398e63af 100644
--- a/documentation/yocto-project-qs/yocto-project-qs.xml
+++ b/documentation/yocto-project-qs/yocto-project-qs.xml
@@ -804,29 +804,23 @@
         </footnote>
         gives you a minimal description of how to use the Yocto Project to build images
         for a BeagleBoard xM starting from scratch.
-        The steps were performed on a 64-bit Ubuntu 10.04 system.
+        The steps were performed on a 64-bit Ubuntu 12.04 system.
     </para>
 
     <section id='getting-yocto'>
         <title>Getting the Yocto Project</title>
 
         <para>
-            Set up your <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>
-            one of two ways:
-            <itemizedlist>
-                <listitem><para><emphasis>Tarball:</emphasis>
-                    Use if you want the latest stable release:
-                    <literallayout class='monospaced'>
-     $ wget &YOCTO_RELEASE_DL_URL;/&YOCTO_POKY_TARBALL;
-     $ tar xvjf &YOCTO_POKY_TARBALL;
-                    </literallayout></para></listitem>
-                <listitem><para><emphasis>Git Repository:</emphasis>
-                    Use if you want to work with cutting edge development content:
-                    <literallayout class='monospaced'>
+            Set up your
+            <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>
+            by using Git to clone the <filename>poky</filename> poky
+            repository and then check out the release branch:
+            <literallayout class='monospaced'>
+     $ cd ~
      $ git clone git://git.yoctoproject.org/poky
-                    </literallayout></para></listitem>
-            </itemizedlist>
-            The remainder of the section assumes the Git repository method.
+     $ cd poky
+     $ git checkout -b &DISTRO_NAME; origin/&DISTRO_NAME;
+            </literallayout>
         </para>
     </section>
 
@@ -835,7 +829,8 @@
 
         <para>
             You need some packages for everything to work.
-            Rather than duplicate them here, look at the "<link linkend='packages'>The Packages</link>"
+            Rather than duplicate them here, look at the
+            "<link linkend='packages'>The Packages</link>"
             section earlier in this quick start.
         </para>
     </section>
@@ -844,17 +839,18 @@
         <title>Initializing the Build Environment</title>
 
         <para>
-            From the parent directory your
+            From the root directory of your
             <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>,
             initialize your environment and provide a meaningful
             <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
             name:
             <literallayout class='monospaced'>
-     $ source poky/&OE_INIT_FILE; mybuilds
+     $ source &OE_INIT_FILE; mybuilds
             </literallayout>
-            At this point, the <filename>mybuilds</filename> directory has been created for you
-            and it is now your current working directory.
-            If you don't provide your own directory name it defaults to <filename>build</filename>,
+            At this point, the <filename>mybuilds</filename> directory has
+            been created for you and it is now your current working directory.
+            If you don't provide your own directory name,
+            it defaults to <filename>build</filename>,
             which is inside the Source Directory.
         </para>
     </section>
@@ -863,18 +859,21 @@
         <title>Configuring the local.conf File</title>
 
         <para>
-            Initializing the build environment creates a <filename>conf/local.conf</filename> configuration file
+            Initializing the build environment creates a
+            <filename>conf/local.conf</filename> configuration file
             in the Build Directory.
-            You need to manually edit this file to specify the machine you are building and to optimize
-            your build time.
+            You need to manually edit this file to specify the machine you
+            are building and to optimize your build time.
             Here are the minimal changes to make:
             <literallayout class='monospaced'>
      BB_NUMBER_THREADS = "8"
      PARALLEL_MAKE = "-j 8"
      MACHINE ?= "beagleboard"
             </literallayout>
-            Briefly, set <ulink url='&YOCTO_DOCS_REF_URL;#var-BB_NUMBER_THREADS'><filename>BB_NUMBER_THREADS</filename></ulink>
-            and <ulink url='&YOCTO_DOCS_REF_URL;#var-PARALLEL_MAKE'><filename>PARALLEL_MAKE</filename></ulink> to
+            Briefly, set
+            <ulink url='&YOCTO_DOCS_REF_URL;#var-BB_NUMBER_THREADS'><filename>BB_NUMBER_THREADS</filename></ulink>
+            and
+            <ulink url='&YOCTO_DOCS_REF_URL;#var-PARALLEL_MAKE'><filename>PARALLEL_MAKE</filename></ulink> to
             twice your host processor's number of cores.
         </para>
 
@@ -924,9 +923,10 @@
         <title>Building the Image</title>
 
         <para>
-            At this point, you need to select an image to build for the BeagleBoard xM.
-            If this is your first build using the Yocto Project, you should try the smallest and simplest
-            image:
+            At this point, you need to select an image to build for the
+            BeagleBoard xM.
+            If this is your first build using the Yocto Project, you should try
+            the smallest and simplest image:
             <literallayout class='monospaced'>
      $ bitbake core-image-minimal
             </literallayout>
@@ -936,15 +936,18 @@
         <para>
             Here are some variations on the build process that could be helpful:
             <itemizedlist>
-                <listitem><para>Fetch all the necessary sources without starting the build:
+                <listitem><para>Fetch all the necessary sources without starting
+                    the build:
                     <literallayout class='monospaced'>
      $ bitbake -c fetchall core-image-minimal
                     </literallayout>
-                    This variation guarantees that you have all the sources for that BitBake target
-                    should you disconnect from the net and want to do the build later offline.
-                    </para></listitem>
-                <listitem><para>Specify to continue the build even if BitBake encounters an error.
-                    By default, BitBake aborts the build when it encounters an error.
+                    This variation guarantees that you have all the sources for
+                    that BitBake target should you disconnect from the net and
+                    want to do the build later offline.</para></listitem>
+                <listitem><para>Specify to continue the build even if BitBake
+                    encounters an error.
+                    By default, BitBake aborts the build when it encounters an
+                    error.
                     This command keeps a faulty build going:
                     <literallayout class='monospaced'>
      $ bitbake -k core-image-minimal
@@ -953,7 +956,8 @@
         </para>
 
         <para>
-            Once you have your image, you can take steps to load and boot it on the target hardware.
+            Once you have your image, you can take steps to load and boot it on
+            the target hardware.
         </para>
     </section>
 </section>