gnupg: upgrade 2.2.16 -> 2.2.17 - openembedded-core-contrib - OpenEmbedded Core user contribution trees

OpenEmbedded Core user contribution trees
Grokmirror user
diff options
author	Anuj Mittal <anuj.mittal@intel.com>	2020-03-15 20:13:08 +0200
committer	Armin Kuster <akuster808@gmail.com>	2020-03-25 19:35:58 -0700
commit	ae33f509d753821111bb6b30343b02b37d996339 (patch)
tree	e856d6cf29c76402c9756558a2659441a2fad451
parent	bb12f99a5bce3fcee1ef36406197231723647a8d (diff)
download	openembedded-core-contrib-ae33f509d753821111bb6b30343b02b37d996339.tar.gz
gnupg: upgrade 2.2.16 -> 2.2.17
Also fixes CVE-2019-13050. Announcement: https://lists.gnupg.org/pipermail/gnupg-announce/2019q3/000439.html (From OE-Core rev: c6e46323f0d62daf8bd424e642581fdcba920ef7) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Diffstat
-rw-r--r--
meta/recipes-support/gnupg/gnupg_2.2.17.bb (renamed from meta/recipes-support/gnupg/gnupg_2.2.16.bb)
1 files changed, 2 insertions, 3 deletions
ref='#n177'>177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370
<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >

<chapter id='sdk-using-the-standard-sdk'>

<title>Using the Standard SDK</title>

<para>
    This chapter describes the standard SDK and how to use it.
    Information covers the pieces of the SDK, how to install it, and presents
    several task-based procedures common for developing with a standard SDK.
    <note>
        The tasks you can perform using a standard SDK are also applicable
        when you are using an extensible SDK.
        For information on the differences when using an extensible SDK as
        compared to a standard SDK, see the
        "<link linkend='sdk-extensible'>Using the Extensible SDK</link>"
        chapter.
    </note>
</para>

<section id='sdk-standard-sdk-intro'>
    <title>Why use the Standard SDK and What is in It?</title>

    <para>
        The Standard SDK provides a cross-development toolchain and libraries
        tailored to the contents of a specific image.
        You would use the Standard SDK if you want a more traditional toolchain
        experience.
    </para>

    <para>
        The installed Standard SDK consists of several files and directories.
        Basically, it contains an SDK environment setup script, some
        configuration files, and host and target root filesystems to support
        usage.
        You can see the directory structure in the
        "<link linkend='sdk-installed-standard-sdk-directory-structure'>Installed Standard SDK Directory Structure</link>"
        section.
    </para>
</section>

<section id='sdk-installing-the-sdk'>
    <title>Installing the SDK</title>

    <para>
        The first thing you need to do is install the SDK on your host
        development machine by running the <filename>*.sh</filename>
        installation script.
    </para>

    <para>
        You can download a tarball installer, which includes the
        pre-built toolchain, the <filename>runqemu</filename>
        script, and support files from the appropriate directory under
        <ulink url='&YOCTO_TOOLCHAIN_DL_URL;'></ulink>.
        Toolchains are available for 32-bit and 64-bit x86 development
        systems from the <filename>i686</filename> and
        <filename>x86_64</filename> directories, respectively.
        The toolchains the Yocto Project provides are based off the
        <filename>core-image-sato</filename> image and contain
        libraries appropriate for developing against that image.
        Each type of development system supports five or more target
        architectures.
    </para>

    <para>
        The names of the tarball installer scripts are such that a
        string representing the host system appears first in the
        filename and then is immediately followed by a string
        representing the target architecture.
        <literallayout class='monospaced'>
     poky-glibc-<replaceable>host_system</replaceable>-<replaceable>image_type</replaceable>-<replaceable>arch</replaceable>-toolchain-<replaceable>release_version</replaceable>.sh

     Where:
         <replaceable>host_system</replaceable> is a string representing your development system:

                    i686 or x86_64.

         <replaceable>image_type</replaceable> is the image for which the SDK was built.

         <replaceable>arch</replaceable> is a string representing the tuned target architecture:

                    i586, x86_64, powerpc, mips, armv7a or armv5te

         <replaceable>release_version</replaceable> is a string representing the release number of the
                Yocto Project:

                    &DISTRO;, &DISTRO;+snapshot
        </literallayout>
        For example, the following toolchain installer is for a 64-bit
        development host system and a i586-tuned target architecture
        based off the SDK for <filename>core-image-sato</filename> and
        using the current &DISTRO; snapshot:
        <literallayout class='monospaced'>
     poky-glibc-x86_64-core-image-sato-i586-toolchain-&DISTRO;.sh
        </literallayout>
        <note>
            As an alternative to downloading an SDK, you can build the toolchain
            installer.
            For information on building the installer, see the
            "<link linkend='sdk-building-an-sdk-installer'>Building an SDK Installer</link>"
            section.
            Another helpful resource for building an installer is the
            <ulink url='https://wiki.yoctoproject.org/wiki/TipsAndTricks/RunningEclipseAgainstBuiltImage'>Cookbook guide to Making an Eclipse Debug Capable Image</ulink>
            wiki page.
            This wiki page focuses on development when using the Eclipse IDE.
        </note>
    </para>

    <para>
        The SDK and toolchains are self-contained and by default are installed
        into <filename>/opt/poky</filename>.
        However, when you run the SDK installer, you can choose an
        installation directory.
        <note>
            You must change the permissions on the toolchain
            installer script so that it is executable:
            <literallayout class='monospaced'>
     $ chmod +x poky-glibc-x86_64-core-image-sato-i586-toolchain-&DISTRO;.sh
            </literallayout>
        </note>
    </para>

    <para>
        The following command shows how to run the installer given a
        toolchain tarball for a 64-bit x86 development host system and
        a 32-bit x86 target architecture.
        The example assumes the toolchain installer is located in
        <filename>~/Downloads/</filename>.
        <note>
            If you do not have write permissions for the directory
            into which you are installing the SDK, the installer
            notifies you and exits.
            Be sure you have write permissions in the directory and
            run the installer again.
        </note>
        <literallayout class='monospaced'>
     $ ./poky-glibc-x86_64-core-image-sato-i586-toolchain-&DISTRO;.sh
     Poky (Yocto Project Reference Distro) SDK installer version 2.0
     ===============================================================
     Enter target directory for SDK (default: /opt/poky/&DISTRO;):
     You are about to install the SDK to "/opt/poky/&DISTRO;". Proceed[Y/n]? Y
     Extracting SDK.......................................................................done
     Setting it up...done
     SDK has been successfully set up and is ready to be used.
     Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.
      $ . /opt/poky/&DISTRO;/environment-setup-i586-poky-linux
        </literallayout>
    </para>

    <para>
        Again, reference the
        "<link linkend='sdk-installed-standard-sdk-directory-structure'>Installed Standard SDK Directory Structure</link>"
        section for more details on the resulting directory structure of
        the installed SDK.
    </para>
</section>

<section id='sdk-running-the-sdk-environment-setup-script'>
    <title>Running the SDK Environment Setup Script</title>

    <para>
        Once you have the SDK installed, you must run the SDK environment
        setup script before you can actually use it.
        This setup script resides in the directory you chose when you installed
        the SDK.
        For information on where this setup script can reside, see the
        "<link linkend='sdk-appendix-obtain'>Obtaining the SDK</link>"
        Appendix.
    </para>

    <para>
        Before running the script, be sure it is the one that matches the
        architecture for which you are developing.
        Environment setup scripts begin with the string
        "<filename>environment-setup</filename>" and include as part of their
        name the tuned target architecture.
        For example, the command to source a setup script for an IA-based
        target machine using i586 tuning and located in the default SDK
        installation directory is as follows:
        <literallayout class='monospaced'>
     $ source /opt/poky/&DISTRO;/environment-setup-i586-poky-linux
        </literallayout>
        When you run the setup script, many environment variables are
        defined:
        <literallayout class='monospaced'>
     <ulink url='&YOCTO_DOCS_REF_URL;#var-SDKTARGETSYSROOT'><filename>SDKTARGETSYSROOT</filename></ulink> - The path to the sysroot used for cross-compilation
     <ulink url='&YOCTO_DOCS_REF_URL;#var-PKG_CONFIG_PATH'><filename>PKG_CONFIG_PATH</filename></ulink> - The path to the target pkg-config files
     <ulink url='&YOCTO_DOCS_REF_URL;#var-CONFIG_SITE'><filename>CONFIG_SITE</filename></ulink> - A GNU autoconf site file preconfigured for the target
     <ulink url='&YOCTO_DOCS_REF_URL;#var-CC'><filename>CC</filename></ulink> - The minimal command and arguments to run the C compiler
     <ulink url='&YOCTO_DOCS_REF_URL;#var-CXX'><filename>CXX</filename></ulink> - The minimal command and arguments to run the C++ compiler
     <ulink url='&YOCTO_DOCS_REF_URL;#var-CPP'><filename>CPP</filename></ulink> - The minimal command and arguments to run the C preprocessor
     <ulink url='&YOCTO_DOCS_REF_URL;#var-AS'><filename>AS</filename></ulink> - The minimal command and arguments to run the assembler
     <ulink url='&YOCTO_DOCS_REF_URL;#var-LD'><filename>LD</filename></ulink> - The minimal command and arguments to run the linker
     <ulink url='&YOCTO_DOCS_REF_URL;#var-GDB'><filename>GDB</filename></ulink> - The minimal command and arguments to run the GNU Debugger
     <ulink url='&YOCTO_DOCS_REF_URL;#var-STRIP'><filename>STRIP</filename></ulink> - The minimal command and arguments to run 'strip', which strips symbols
     <ulink url='&YOCTO_DOCS_REF_URL;#var-RANLIB'><filename>RANLIB</filename></ulink> - The minimal command and arguments to run 'ranlib'
     <ulink url='&YOCTO_DOCS_REF_URL;#var-OBJCOPY'><filename>OBJCOPY</filename></ulink> - The minimal command and arguments to run 'objcopy'
     <ulink url='&YOCTO_DOCS_REF_URL;#var-OBJDUMP'><filename>OBJDUMP</filename></ulink> - The minimal command and arguments to run 'objdump'
     <ulink url='&YOCTO_DOCS_REF_URL;#var-AR'><filename>AR</filename></ulink> - The minimal command and arguments to run 'ar'
     <ulink url='&YOCTO_DOCS_REF_URL;#var-NM'><filename>NM</filename></ulink> - The minimal command and arguments to run 'nm'
     <ulink url='&YOCTO_DOCS_REF_URL;#var-TARGET_PREFIX'><filename>TARGET_PREFIX</filename></ulink> - The toolchain binary prefix for the target tools
     <ulink url='&YOCTO_DOCS_REF_URL;#var-CROSS_COMPILE'><filename>CROSS_COMPILE</filename></ulink> - The toolchain binary prefix for the target tools
     <ulink url='&YOCTO_DOCS_REF_URL;#var-CONFIGURE_FLAGS'><filename>CONFIGURE_FLAGS</filename></ulink> - The minimal arguments for GNU configure
     <ulink url='&YOCTO_DOCS_REF_URL;#var-CFLAGS'><filename>CFLAGS</filename></ulink> - Suggested C flags
     <ulink url='&YOCTO_DOCS_REF_URL;#var-CXXFLAGS'><filename>CXXFLAGS</filename></ulink> - Suggested C++ flags
     <ulink url='&YOCTO_DOCS_REF_URL;#var-LDFLAGS'><filename>LDFLAGS</filename></ulink> - Suggested linker flags when you use CC to link
     <ulink url='&YOCTO_DOCS_REF_URL;#var-CPPFLAGS'><filename>CPPFLAGS</filename></ulink> - Suggested preprocessor flags
        </literallayout>
    </para>
</section>

<section id='autotools-based-projects'>
    <title>Autotools-Based Projects</title>

    <para>
        Once you have a suitable cross-toolchain installed, it is very easy to
        develop a project outside of the OpenEmbedded build system.
        This section presents a simple "Helloworld" example that shows how
        to set up, compile, and run the project.
    </para>

    <section id='creating-and-running-a-project-based-on-gnu-autotools'>
        <title>Creating and Running a Project Based on GNU Autotools</title>

        <para>
            Follow these steps to create a simple Autotools-based project:
            <orderedlist>
                <listitem><para><emphasis>Create your directory:</emphasis>
                    Create a clean directory for your project and then make
                    that directory your working location:
                    <literallayout class='monospaced'>
     $ mkdir $HOME/helloworld
     $ cd $HOME/helloworld
                    </literallayout></para></listitem>
                <listitem><para><emphasis>Populate the directory:</emphasis>
                    Create <filename>hello.c</filename>, <filename>Makefile.am</filename>,
                    and <filename>configure.ac</filename> files as follows:
                    <itemizedlist>
                        <listitem><para>For <filename>hello.c</filename>, include
                            these lines:
                            <literallayout class='monospaced'>
     #include &lt;stdio.h&gt;

     main()
        {
           printf("Hello World!\n");
        }
                            </literallayout></para></listitem>
                        <listitem><para>For <filename>Makefile.am</filename>,
                            include these lines:
                            <literallayout class='monospaced'>
     bin_PROGRAMS = hello
     hello_SOURCES = hello.c
                            </literallayout></para></listitem>
                        <listitem><para>For <filename>configure.in</filename>,
                            include these lines:
                            <literallayout class='monospaced'>
     AC_INIT(hello,0.1)
     AM_INIT_AUTOMAKE([foreign])
     AC_PROG_CC
     AC_PROG_INSTALL
     AC_OUTPUT(Makefile)
                            </literallayout></para></listitem>
                    </itemizedlist></para></listitem>
                <listitem><para><emphasis>Source the cross-toolchain
                    environment setup file:</emphasis>
                    As described earlier in the manual, installing the
                    cross-toolchain creates a cross-toolchain
                    environment setup script in the directory that the SDK
                    was installed.
                    Before you can use the tools to develop your project,
                    you must source this setup script.
                    The script begins with the string "environment-setup" and
                    contains the machine architecture, which is followed by the
                    string "poky-linux".
                    Here is an example that sources a script from the
                    default SDK installation directory that uses the
                    32-bit Intel x86 Architecture and the
                    &DISTRO_NAME; Yocto Project release:
                    <literallayout class='monospaced'>
     $ source /opt/poky/&DISTRO;/environment-setup-i586-poky-linux
                    </literallayout></para></listitem>
                <listitem><para><emphasis>Generate the local aclocal.m4
                    files and create the configure script:</emphasis>
                    The following GNU Autotools generate the local
                    <filename>aclocal.m4</filename> files and create the
                    configure script:
                    <literallayout class='monospaced'>
     $ aclocal
     $ autoconf
                    </literallayout></para></listitem>
                <listitem><para><emphasis>Generate files needed by GNU
                    coding standards:</emphasis>
                    GNU coding standards require certain files in order for the
                    project to be compliant.
                    This command creates those files:
                    <literallayout class='monospaced'>
     $ touch NEWS README AUTHORS ChangeLog
                    </literallayout></para></listitem>
                <listitem><para><emphasis>Generate the configure
                    file:</emphasis>
                    This command generates the <filename>configure</filename>:
                    <literallayout class='monospaced'>
     $ automake -a
                    </literallayout></para></listitem>
                <listitem><para><emphasis>Cross-compile the project:</emphasis>
                    This command compiles the project using the cross-compiler.
                    The
                    <ulink url='&YOCTO_DOCS_REF_URL;#var-CONFIGURE_FLAGS'><filename>CONFIGURE_FLAGS</filename></ulink>
                    environment variable provides the minimal arguments for
                    GNU configure:
                    <literallayout class='monospaced'>
     $ ./configure ${CONFIGURE_FLAGS}
                    </literallayout></para></listitem>
                <listitem><para><emphasis>Make and install the project:</emphasis>
                    These two commands generate and install the project into the
                    destination directory:
                    <literallayout class='monospaced'>
     $ make
     $ make install DESTDIR=./tmp
                    </literallayout></para></listitem>
                <listitem><para><emphasis>Verify the installation:</emphasis>
                    This command is a simple way to verify the installation
                    of your project.
                    Running the command prints the architecture on which
                    the binary file can run.
                    This architecture should be the same architecture that
                    the installed cross-toolchain supports.
                    <literallayout class='monospaced'>
     $ file ./tmp/usr/local/bin/hello
                    </literallayout></para></listitem>
                <listitem><para><emphasis>Execute your project:</emphasis>
                    To execute the project in the shell, simply enter the name.
                    You could also copy the binary to the actual target hardware
                    and run the project there as well:
                    <literallayout class='monospaced'>
     $ ./hello
                    </literallayout>
                    As expected, the project displays the "Hello World!" message.
                    </para></listitem>
            </orderedlist>
        </para>
    </section>

    <section id='passing-host-options'>
        <title>Passing Host Options</title>

        <para>
            For an Autotools-based project, you can use the cross-toolchain by just
            passing the appropriate host option to <filename>configure.sh</filename>.
            The host option you use is derived from the name of the environment setup
            script found in the directory in which you installed the cross-toolchain.
            For example, the host option for an ARM-based target that uses the GNU EABI
            is <filename>armv5te-poky-linux-gnueabi</filename>.
            You will notice that the name of the script is
            <filename>environment-setup-armv5te-poky-linux-gnueabi</filename>.
            Thus, the following command works to update your project and
            rebuild it using the appropriate cross-toolchain tools:
            <literallayout class='monospaced'>
     $ ./configure --host=armv5te-poky-linux-gnueabi \
        --with-libtool-sysroot=<replaceable>sysroot_dir</replaceable>
            </literallayout>
            <note>
                If the <filename>configure</filename> script results in problems recognizing the
                <filename>--with-libtool-sysroot=</filename><replaceable>sysroot-dir</replaceable> option,
                regenerate the script to enable the support by doing the following and then
                run the script again:
                <literallayout class='monospaced'>
     $ libtoolize --automake
     $ aclocal -I ${OECORE_NATIVE_SYSROOT}/usr/share/aclocal \
        [-I <replaceable>dir_containing_your_project-specific_m4_macros</replaceable>]
     $ autoconf
     $ autoheader
     $ automake -a
                </literallayout>
            </note>
        </para>
    </section>
</section>

<section id='makefile-based-projects'>
    <title>Makefile-Based Projects</title>

    <para>
        For Makefile-based projects, the cross-toolchain environment variables
        established by running the cross-toolchain environment setup script
        are subject to general <filename>make</filename> rules.
    </para>

    <para>
        To illustrate this, consider the following four cross-toolchain
        environment variables:
        <literallayout class='monospaced'>
     <ulink url='&YOCTO_DOCS_REF_URL;#var-CC'>CC</ulink>=i586-poky-linux-gcc -m32 -march=i586 --sysroot=/opt/poky/&DISTRO;/sysroots/i586-poky-linux
     <ulink url='&YOCTO_DOCS_REF_URL;#var-LD'>LD</ulink>=i586-poky-linux-ld --sysroot=/opt/poky/&DISTRO;/sysroots/i586-poky-linux
     <ulink url='&YOCTO_DOCS_REF_URL;#var-CFLAGS'>CFLAGS</ulink>=-O2 -pipe -g -feliminate-unused-debug-types
     <ulink url='&YOCTO_DOCS_REF_URL;#var-CXXFLAGS'>CXXFLAGS</ulink>=-O2 -pipe -g -feliminate-unused-debug-types
        </literallayout>
        Now, consider the following three cases:
        <itemizedlist>
            <listitem><para><emphasis>Case 1 - No Variables Set in the <filename>Makefile</filename>:</emphasis>
                Because these variables are not specifically set in the
                <filename>Makefile</filename>, the variables retain their
                values based on the environment.
                </para></listitem>
            <listitem><para><emphasis>Case 2 - Variables Set in the <filename>Makefile</filename>:</emphasis>
                Specifically setting variables in the
                <filename>Makefile</filename> during the build results in the
                environment settings of the variables being overwritten.
                </para></listitem>
            <listitem><para><emphasis>Case 3 - Variables Set when the <filename>Makefile</filename> is Executed from the Command Line:</emphasis>
                Executing the <filename>Makefile</filename> from the command
                line results in the variables being overwritten with
                command-line content regardless of what is being set in the
                <filename>Makefile</filename>.
                In this case, environment variables are not considered unless
                you use the "-e" flag during the build:
                <literallayout class='monospaced'>
     $ make -e <replaceable>file</replaceable>
                </literallayout>
                If you use this flag, then the environment values of the
                variables override any variables specifically set in the
                <filename>Makefile</filename>.
                </para></listitem>
        </itemizedlist>
        <note>
            For the list of variables set up by the cross-toolchain environment
            setup script, see the
            "<link linkend='sdk-running-the-sdk-environment-setup-script'>Running the SDK Environment Setup Script</link>"
            section.
        </note>
    </para>
</section>

<section id='sdk-developing-applications-using-eclipse'>
    <title>Developing Applications Using <trademark class='trade'>Eclipse</trademark></title>

    <para>
        If you are familiar with the popular Eclipse IDE, you can use an
        Eclipse Yocto Plug-in to allow you to develop, deploy, and test your
        application all from within Eclipse.
        This section describes general workflow using the SDK and Eclipse
        and how to configure and set up Eclipse.
    </para>

    <section id='workflow-using-eclipse'>

        <title>Workflow Using <trademark class='trade'>Eclipse</trademark></title>

        <para>
            The following figure and supporting list summarize the application
            development general workflow that employs both the SDK Eclipse.
        </para>

        <para>
            <imagedata fileref="figures/sdk-eclipse-dev-flow.png"
                width="7in" depth="7in" align="center" scale="100" />
        </para>

        <para>
            <orderedlist>
                <listitem><para><emphasis>Prepare the host system for the Yocto Project</emphasis>:
                    See
                    "<ulink url='&YOCTO_DOCS_REF_URL;#detailed-supported-distros'>Supported Linux Distributions</ulink>"
                    and
                    "<ulink url='&YOCTO_DOCS_REF_URL;#required-packages-for-the-host-development-system'>Required Packages for the Host Development System</ulink>" sections both
                    in the Yocto Project Reference Manual for requirements.
                    In particular, be sure your host system has the
                    <filename>xterm</filename> package installed.
                    </para></listitem>
                <listitem><para><emphasis>Secure the Yocto Project kernel target image</emphasis>:
                    You must have a target kernel image that has been built using the OpenEmbedded
                    build system.</para>
                    <para>Depending on whether the Yocto Project has a pre-built image that matches your target
                    architecture and where you are going to run the image while you develop your application
                    (QEMU or real hardware), the area from which you get the image differs.
                        <itemizedlist>
                            <listitem><para>Download the image from
                                <ulink url='&YOCTO_MACHINES_DL_URL;'><filename>machines</filename></ulink>
                                if your target architecture is supported and you are going to develop
                                and test your application on actual hardware.</para></listitem>
                            <listitem><para>Download the image from
                                <ulink url='&YOCTO_QEMU_DL_URL;'>
                                <filename>machines/qemu</filename></ulink> if your target architecture is supported
                                and you are going to develop and test your application using the QEMU
                                emulator.</para></listitem>
                            <listitem><para>Build your image if you cannot find a pre-built image that matches
                                your target architecture.
                                If your target architecture is similar to a supported architecture, you can
                                modify the kernel image before you build it.
                                See the
                                "<ulink url='&YOCTO_DOCS_DEV_URL;#patching-the-kernel'>Patching the Kernel</ulink>"
                                section in the Yocto Project Development
                                manual for an example.
                                </para></listitem>
                        </itemizedlist>
                    </para></listitem>
                <listitem><para><emphasis>Install the SDK</emphasis>:
                    The SDK provides a target-specific cross-development toolchain, the root filesystem,
                    the QEMU emulator, and other tools that can help you develop your application.
                    For information on how to install the SDK, see the
                    "<link linkend='sdk-installing-the-sdk'>Installing the SDK</link>"
                    section.
                    </para></listitem>
                <listitem><para><emphasis>
                    Secure the target root filesystem
                    and the Cross-development toolchain</emphasis>:
                    You need to find and download the appropriate root
                    filesystem and the cross-development toolchain.</para>
                    <para>You can find the tarballs for the root filesystem in
                    the same area used for the kernel image.
                    Depending on the type of image you are running, the root
                    filesystem you need differs.
                    For example, if you are developing an application that
                    runs on an image that supports Sato, you need to get a
                    root filesystem that supports Sato.</para>
                    <para>You can find the cross-development toolchains at
                    <ulink url='&YOCTO_TOOLCHAIN_DL_URL;'><filename>toolchains</filename></ulink>.
                    Be sure to get the correct toolchain for your development host and your
                    target architecture.
                    See the "<link linkend='sdk-locating-pre-built-sdk-installers'>Locating Pre-Built SDK Installers</link>"
                    section for information and the
                    "<link linkend='sdk-installing-the-sdk'>Installing the SDK</link>"
                    section for installation information.
                    <note>
                        As an alternative to downloading an SDK, you can build
                        the toolchain installer.
                        For information on building the installer, see the
                        "<link linkend='sdk-building-an-sdk-installer'>Building an SDK Installer</link>"
                        section.
                        Another helpful resource for building an installer is
                        the
                        <ulink url='https://wiki.yoctoproject.org/wiki/TipsAndTricks/RunningEclipseAgainstBuiltImage'>Cookbook guide to Making an Eclipse Debug Capable Image</ulink>
                        wiki page.
                    </note>
                    </para></listitem>
                <listitem><para><emphasis>Create and build your application</emphasis>:
                    At this point, you need to have source files for your application.
                    Once you have the files, you can use the Eclipse IDE to import them and build the
                    project.
                    If you are not using Eclipse, you need to use the cross-development tools you have
                    installed to create the image.</para></listitem>
                <listitem><para>
                    <emphasis>Deploy the image with the application</emphasis>:
                    Using the Eclipse IDE, you can deploy your image to the
                    hardware or to QEMU through the project's preferences.
                    You can also use Eclipse to load and test your image under
                    QEMU.
                    See the
                    "<ulink url='&YOCTO_DOCS_DEV_URL;#dev-manual-qemu'>Using the Quick EMUlator (QEMU)</ulink>"
                    chapter in the Yocto Project Development Manual
                    for information on using QEMU.
                    </para></listitem>
                <listitem><para><emphasis>Test and debug the application</emphasis>:
                    Once your application is deployed, you need to test it.
                    Within the Eclipse IDE, you can use the debugging
                    environment along with supported performance enhancing
                    <ulink url='http://www.eclipse.org/linuxtools/'>tools</ulink>.
                    </para></listitem>
           </orderedlist>
        </para>
    </section>

    <section id='adt-eclipse'>
        <title>Working Within Eclipse</title>

        <para role="writernotes">
            This section needs to be updated to use Eclipse Neon throughout.
            It is out of date at the moment.
        </para>

        <para>
            The Eclipse IDE is a popular development environment and it fully
            supports development using the Yocto Project.
            <note>
                This release of the Yocto Project supports both the Luna
                and Kepler versions of the Eclipse IDE.
                Thus, the following information provides setup information for
                both versions.
            </note>
        </para>

        <para>
            When you install and configure the Eclipse Yocto Project Plug-in
            into the Eclipse IDE, you maximize your Yocto Project experience.
            Installing and configuring the Plug-in results in an environment
            that has extensions specifically designed to let you more easily
            develop software.
            These extensions allow for cross-compilation, deployment, and
            execution of your output into a QEMU emulation session as well as
            actual target hardware.
            You can also perform cross-debugging and profiling.
            The environment also supports performance enhancing
            <ulink url='http://www.eclipse.org/linuxtools/'>tools</ulink> that
            allow you to perform remote profiling, tracing, collection of
            power data, collection of latency data, and collection of
            performance data.
        </para>

        <para>
            This section describes how to install and configure the Eclipse IDE
            Yocto Plug-in and how to use it to develop your application.
        </para>

        <section id='setting-up-the-eclipse-ide'>
            <title>Setting Up the Eclipse IDE</title>

            <para>
                To develop within the Eclipse IDE, you need to do the following:
                <orderedlist>
                    <listitem><para>Install the optimal version of the Eclipse
                       IDE.</para></listitem>
                    <listitem><para>Configure the Eclipse IDE.
                       </para></listitem>
                    <listitem><para>Install the Eclipse Yocto Plug-in.
                       </para></listitem>
                    <listitem><para>Configure the Eclipse Yocto Plug-in.
                       </para></listitem>
                </orderedlist>
                <note>
                    Do not install Eclipse from your distribution's package
                    repository.
                    Be sure to install Eclipse from the official Eclipse
                    download site as directed in the next section.
                </note>
            </para>

            <section id='installing-eclipse-ide'>
                <title>Installing the Eclipse IDE</title>

                <para>
                    It is recommended that you have the Luna SR2 (4.4.2)
                    version of the Eclipse IDE installed on your development
                    system.
                    However, if you currently have the Kepler 4.3.2 version
                    installed and you do not want to upgrade the IDE, you can
                    configure Kepler to work with the Yocto Project.
                </para>

                <para>
                    If you do not have the Luna SR2 (4.4.2) Eclipse IDE
                    installed, you can find the tarball at
                    <ulink url='&ECLIPSE_MAIN_URL;'></ulink>.
                    From that site, choose the appropriate download from the
                    "Eclipse IDE for C/C++ Developers".
                    This version contains the Eclipse Platform, the Java
                    Development Tools (JDT), and the Plug-in Development
                    Environment.
                </para>

                <para>
                    Once you have downloaded the tarball, extract it into a
                    clean directory.
                    For example, the following commands unpack and install the
                    downloaded Eclipse IDE tarball into a clean directory
                    using the default name <filename>eclipse</filename>:
                    <literallayout class='monospaced'>
     $ cd ~
     $ tar -xzvf ~/Downloads/eclipse-cpp-luna-SR2-linux-gtk-x86_64.tar.gz
                    </literallayout>
                </para>
            </section>

            <section id='configuring-the-eclipse-ide'>
                <title>Configuring the Eclipse IDE</title>

                <para>
                    This section presents the steps needed to configure the
                    Eclipse IDE.
                </para>

                <para>
                    Before installing and configuring the Eclipse Yocto Plug-in,
                    you need to configure the Eclipse IDE.
                    Follow these general steps:
                    <orderedlist>
                        <listitem><para>Start the Eclipse IDE.</para></listitem>
                        <listitem><para>Make sure you are in your Workbench and
                            select "Install New Software" from the "Help"
                            pull-down menu.</para></listitem>
                        <listitem><para>Select
                            <filename>Luna - &ECLIPSE_LUNA_URL;</filename>
                            from the "Work with:" pull-down menu.
                            <note>
                                For Kepler, select
                                <filename>Kepler - &ECLIPSE_KEPLER_URL;</filename>
                            </note>
                            </para></listitem>
                        <listitem><para>Expand the box next to "Linux Tools"
                            and select the
                            <filename>Linux Tools LTTng Tracer Control</filename>,
                            <filename>Linux Tools LTTng Userspace Analysis</filename>,
                            and
                            <filename>LTTng Kernel Analysis</filename> boxes.
                            If these selections do not appear in the list,
                            that means the items are already installed.
                            <note>
                                For Kepler, select
                                <filename>LTTng - Linux Tracing Toolkit</filename>
                                box.
                            </note>
                            </para></listitem>
                        <listitem><para>Expand the box next to "Mobile and
                            Device Development" and select the following boxes.
                            Again, if any of the following items are not
                            available for selection, that means the items are
                            already installed:
                            <itemizedlist>
                                <listitem><para><filename>C/C++ Remote Launch (Requires RSE Remote System Explorer)</filename></para></listitem>
                                <listitem><para><filename>Remote System Explorer End-user Runtime</filename></para></listitem>
                                <listitem><para><filename>Remote System Explorer User Actions</filename></para></listitem>
                                <listitem><para><filename>Target Management Terminal (Core SDK)</filename></para></listitem>
                                <listitem><para><filename>TCF Remote System Explorer add-in</filename></para></listitem>
                                <listitem><para><filename>TCF Target Explorer</filename></para></listitem>
                            </itemizedlist></para></listitem>
                        <listitem><para>Expand the box next to "Programming
                            Languages" and select the
                            <filename>C/C++ Autotools Support</filename>
                            and <filename>C/C++ Development Tools</filename>
                            boxes.
                            For Luna, these items do not appear on the list
                            as they are already installed.
                            </para></listitem>
                        <listitem><para>Complete the installation and restart
                            the Eclipse IDE.</para></listitem>
                    </orderedlist>
                </para>
            </section>

            <section id='installing-the-eclipse-yocto-plug-in'>
                <title>Installing or Accessing the Eclipse Yocto Plug-in</title>

                <para>
                    You can install the Eclipse Yocto Plug-in into the Eclipse
                    IDE one of two ways:  use the Yocto Project's Eclipse
                    Update site to install the pre-built plug-in or build and
                    install the plug-in from the latest source code.
                </para>

                <section id='new-software'>
                    <title>Installing the Pre-built Plug-in from the Yocto Project Eclipse Update Site</title>

                    <para>
                        To install the Eclipse Yocto Plug-in from the update
                        site, follow these steps:
                        <orderedlist>
                            <listitem><para>Start up the Eclipse IDE.
                                </para></listitem>
                            <listitem><para>In Eclipse, select "Install New
                                Software" from the "Help" menu.
                                </para></listitem>
                            <listitem><para>Click "Add..." in the "Work with:"
                                area.</para></listitem>
                           <listitem><para>Enter
                                <filename>&ECLIPSE_DL_PLUGIN_URL;/luna</filename>
                                in the URL field and provide a meaningful name
                                in the "Name" field.
                                <note>
                                    If you are using Kepler, use
                                    <filename>&ECLIPSE_DL_PLUGIN_URL;/kepler</filename>
                                    in the URL field.
                                </note></para></listitem>
                            <listitem><para>Click "OK" to have the entry added
                                to the "Work with:" drop-down list.
                                </para></listitem>
                            <listitem><para>Select the entry for the plug-in
                                from the "Work with:" drop-down list.
                                </para></listitem>
                            <listitem><para>Check the boxes next to
                                <filename>Yocto Project ADT Plug-in</filename>,
                                <filename>Yocto Project Bitbake Commander Plug-in</filename>,
                                and
                                <filename>Yocto Project Documentation plug-in</filename>.
                                </para></listitem>
                            <listitem><para>Complete the remaining software
                                installation steps and then restart the Eclipse
                                IDE to finish the installation of the plug-in.
                                <note>
                                    You can click "OK" when prompted about
                                    installing software that contains unsigned
                                    content.
                                </note>
                                </para></listitem>
                        </orderedlist>
                    </para>
                </section>

               <section id='zip-file-method'>
                   <title>Installing the Plug-in Using the Latest Source Code</title>

                   <para>
                        To install the Eclipse Yocto Plug-in from the latest
                        source code, follow these steps:
                        <orderedlist>
                            <listitem><para>Be sure your development system
                                is not using OpenJDK to build the plug-in
                                by doing the following:
                                <orderedlist>
                                    <listitem><para>Use the Oracle JDK.
                                        If you don't have that, go to
                                        <ulink url='http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html'></ulink>
                                        and download the latest appropriate
                                        Java SE Development Kit tarball for
                                        your development system and
                                        extract it into your home directory.
                                        </para></listitem>
                                    <listitem><para>In the shell you are going
                                        to do your work, export the location of
                                        the Oracle Java.
                                        The previous step creates a new folder
                                        for the extracted software.
                                        You need to use the following
                                        <filename>export</filename> command
                                        and provide the specific location:
                                        <literallayout class='monospaced'>
     export PATH=~/<replaceable>extracted_jdk_location</replaceable>/bin:$PATH
                                        </literallayout>
                                        </para></listitem>
                                </orderedlist>
                                </para></listitem>
                            <listitem><para>In the same shell, create a Git
                                repository with:
                                <literallayout class='monospaced'>
     $ cd ~
     $ git clone git://git.yoctoproject.org/eclipse-poky
                                </literallayout>
                                </para></listitem>
                            <listitem><para>Be sure to checkout the correct
                                tag.
                                For example, if you are using Luna, do the
                                following:
                                <literallayout class='monospaced'>
     $ git checkout luna/yocto-&DISTRO;
                                </literallayout>
                                This puts you in a detached HEAD state, which
                                is fine since you are only going to be building
                                and not developing.
                                <note>
                                    If you are building kepler, checkout the
                                    <filename>kepler/yocto-&DISTRO;</filename>
                                    branch.
                                </note>
                                </para></listitem>
                            <listitem><para>Change to the
                                <filename>scripts</filename>
                                directory within the Git repository:
                                <literallayout class='monospaced'>
     $ cd scripts
                                </literallayout>
                                </para></listitem>
                            <listitem><para>Set up the local build environment
                                by running the setup script:
                                <literallayout class='monospaced'>
     $ ./setup.sh
                                </literallayout>
                                </para></listitem>
                            <listitem><para>When the script finishes execution,
                                it prompts you with instructions on how to run
                                the <filename>build.sh</filename> script, which
                                is also in the <filename>scripts</filename>
                                directory of the Git repository created
                                earlier.
                                </para></listitem>
                            <listitem><para>Run the <filename>build.sh</filename>
                                script as directed.
                                Be sure to provide the tag name, documentation
                                branch, and a release name.
                                Here is an example that uses the
                                <filename>luna/yocto-&DISTRO;</filename> tag, the
                                <filename>master</filename> documentation
                                branch, and
                                <filename>&DISTRO_NAME_NO_CAP;</filename> for the
                                release name:
                                <literallayout class='monospaced'>
     $ ECLIPSE_HOME=/home/scottrif/eclipse-poky/scripts/eclipse ./build.sh luna/yocto-&DISTRO; master &DISTRO_NAME_NO_CAP; 2>&amp;1 | tee -a build.log
                                </literallayout>
                                After running the script, the file
                                <filename>org.yocto.sdk-</filename><replaceable>release</replaceable><filename>-</filename><replaceable>date</replaceable><filename>-archive.zip</filename>
                                is in the current directory.
                                </para></listitem>
                            <listitem><para>If necessary, start the Eclipse IDE
                                and be sure you are in the Workbench.
                                </para></listitem>
                            <listitem><para>Select "Install New Software" from
                                the "Help" pull-down menu.
                                </para></listitem>
                            <listitem><para>Click "Add".</para></listitem>
                            <listitem><para>Provide anything you want in the
                                "Name" field.
                                </para></listitem>
                            <listitem><para>Click "Archive" and browse to the
                                ZIP file you built in step eight.
                                This ZIP file should not be "unzipped", and must
                                be the <filename>*archive.zip</filename> file
                                created by running the
                                <filename>build.sh</filename> script.
                                </para></listitem>
                            <listitem><para>Click the "OK" button.
                                </para></listitem>
                            <listitem><para>Check the boxes that appear in
                                the installation window to install the
                                <filename>Yocto Project ADT Plug-in</filename>,
                                <filename>Yocto Project Bitbake Commander Plug-in</filename>,
                                and the
                                <filename>Yocto Project Documentation plug-in</filename>.
                                </para></listitem>
                            <listitem><para>Finish the installation by clicking
                                through the appropriate buttons.
                                You can click "OK" when prompted about
                                installing software that contains unsigned
                                content.
                                </para></listitem>
                            <listitem><para>Restart the Eclipse IDE if
                                necessary.
                                </para></listitem>
                        </orderedlist>
                    </para>

                    <para>
                        At this point you should be able to configure the
                        Eclipse Yocto Plug-in as described in the
                        "<link linkend='configuring-the-eclipse-yocto-plug-in'>Configuring the Eclipse Yocto Plug-in</link>"
                        section.</para>
                </section>
            </section>

            <section id='configuring-the-eclipse-yocto-plug-in'>
                <title>Configuring the Eclipse Yocto Plug-in</title>

                <para>
                    Configuring the Eclipse Yocto Plug-in involves setting the
                    Cross Compiler options and the Target options.
                    The configurations you choose become the default settings
                    for all projects.
                    You do have opportunities to change them later when
                    you configure the project (see the following section).
                </para>

                <para>
                    To start, you need to do the following from within the
                    Eclipse IDE:
                    <itemizedlist>
                        <listitem><para>Choose "Preferences" from the
                            "Window" menu to display the Preferences Dialog.
                            </para></listitem>
                        <listitem><para>Click "Yocto Project ADT" to display
                            the configuration screen.
                            </para></listitem>
                    </itemizedlist>
                </para>

                <section id='configuring-the-cross-compiler-options'>
                    <title>Configuring the Cross-Compiler Options</title>

                    <para>
                        To configure the Cross Compiler Options, you must select
                        the type of toolchain, point to the toolchain, specify
                        the sysroot location, and select the target
                        architecture.
                        <itemizedlist>
                            <listitem><para><emphasis>Selecting the Toolchain Type:</emphasis>
                                Choose between
                                <filename>Standalone pre-built toolchain</filename>
                                and
                                <filename>Build system derived toolchain</filename>
                                for Cross Compiler Options.
                                    <itemizedlist>
                                        <listitem><para><emphasis>
                                            <filename>Standalone Pre-built Toolchain:</filename></emphasis>
                                            Select this mode when you are using
                                            a stand-alone cross-toolchain.
                                            For example, suppose you are an
                                            application developer and do not
                                            need to build a target image.
                                            Instead, you just want to use an
                                            architecture-specific toolchain on
                                            an existing kernel and target root
                                            filesystem.</para></listitem>
                                       <listitem><para><emphasis>
                                            <filename>Build System Derived Toolchain:</filename></emphasis>
                                            Select this mode if the
                                            cross-toolchain has been installed
                                            and built as part of the
                                            <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
                                            When you select
                                            <filename>Build system derived toolchain</filename>,
                                            you are using the toolchain bundled
                                            inside the Build Directory.
                                            </para></listitem>
                                    </itemizedlist>
                                </para></listitem>
                            <listitem><para><emphasis>Point to the Toolchain:</emphasis>
                                If you are using a stand-alone pre-built
                                toolchain, you should be pointing to where it is
                                installed.
                                See the
                                "<link linkend='sdk-installing-the-sdk'>Installing the SDK</link>"
                                section for information about how the SDK is
                                installed.</para>
                                <para>If you are using a system-derived
                                toolchain, the path you provide for the
                                <filename>Toolchain Root Location</filename>
                                field is the
                                <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
                                See the
                                "<link linkend='sdk-building-an-sdk-installer'>Building an SDK Installer</link>"
                                section.</para></listitem>
                            <listitem><para><emphasis>Specify the Sysroot Location:</emphasis>
                                This location is where the root filesystem for
                                the target hardware resides.
                                </para>
                                <para>The location of
                                the sysroot filesystem depends on where you
                                separately extracted and installed the
                                filesystem.</para>
                                <para>For information on how to install the
                                toolchain and on how to extract and install the
                                sysroot filesystem, see the
                                "<link linkend='sdk-building-an-sdk-installer'>Building an SDK Installer</link>"
                                section.
                                </para></listitem>
                            <listitem><para><emphasis>Select the Target Architecture:</emphasis>
                                The target architecture is the type of hardware
                                you are going to use or emulate.
                                Use the pull-down
                                <filename>Target Architecture</filename> menu
                                to make your selection.
                                The pull-down menu should have the supported
                                architectures.
                                If the architecture you need is not listed in
                                the menu, you will need to build the image.
                                See the
                                "<ulink url='&YOCTO_DOCS_QS_URL;#qs-building-images'>Building Images</ulink>"
                                section of the Yocto Project Quick Start for
                                more information.</para></listitem>
                        </itemizedlist>
                    </para>
                </section>

                <section id='configuring-the-target-options'>
                    <title>Configuring the Target Options</title>

                    <para>
                        You can choose to emulate hardware using the QEMU
                        emulator, or you can choose to run your image on actual
                        hardware.
                        <itemizedlist>
                            <listitem><para><emphasis>QEMU:</emphasis>
                                Select this option if you will be using the
                                QEMU emulator.
                                If you are using the emulator, you also need to
                                locate the kernel and specify any custom
                                options.</para>
                                <para>If you selected
                                <filename>Build system derived toolchain</filename>,
                                the target kernel you built will be located in
                                the Build Directory in
                                <filename>tmp/deploy/images/<replaceable>machine</replaceable></filename>
                                directory.
                                If you selected
                                <filename>Standalone pre-built toolchain</filename>,
                                the pre-built image you downloaded is located
                                in the directory you specified when you
                                downloaded the image.</para>
                                <para>Most custom options are for advanced QEMU
                                users to further customize their QEMU instance.
                                These options are specified between paired
                                angled brackets.
                                Some options must be specified outside the
                                brackets.
                                In particular, the options
                                <filename>serial</filename>,
                                <filename>nographic</filename>, and
                                <filename>kvm</filename> must all be outside the
                                brackets.
                                Use the <filename>man qemu</filename> command
                                to get help on all the options and their use.
                                The following is an example:
                               <literallayout class='monospaced'>
    serial ‘&lt;-m 256 -full-screen&gt;’
                                </literallayout></para>
                                <para>
                                Regardless of the mode, Sysroot is already
                                defined as part of the Cross-Compiler Options
                                configuration in the
                                <filename>Sysroot Location:</filename> field.
                                </para></listitem>
                            <listitem><para><emphasis>External HW:</emphasis>
                                Select this option if you will be using actual
                                hardware.</para></listitem>
                        </itemizedlist>
                    </para>

                    <para>
                        Click the "OK" to save your plug-in configurations.
                    </para>
                </section>
            </section>
        </section>

        <section id='creating-the-project'>
            <title>Creating the Project</title>

            <para>
                You can create two types of projects:  Autotools-based, or
                Makefile-based.
                This section describes how to create Autotools-based projects
                from within the Eclipse IDE.
                For information on creating Makefile-based projects in a
                terminal window, see the
                "<link linkend='makefile-based-projects'>Makefile-Based Projects</link>"
                section.
                <note>
                    Do not use special characters in project names
                    (e.g. spaces, underscores, etc.).  Doing so can
                    cause configuration to fail.
                </note>
            </para>

            <para>
                To create a project based on a Yocto template and then display
                the source code, follow these steps:
                <orderedlist>
                    <listitem><para>Select "Project" from the "File -> New" menu.
                        </para></listitem>
                    <listitem><para>Double click <filename>CC++</filename>.
                        </para></listitem>
                    <listitem><para>Double click <filename>C Project</filename>
                        to create the project.</para></listitem>
                    <listitem><para>Expand <filename>Yocto Project ADT Autotools Project</filename>.
                        </para></listitem>
                    <listitem><para>Select <filename>Hello World ANSI C Autotools Project</filename>.
                        This is an Autotools-based project based on a Yocto
                        template.</para></listitem>
                    <listitem><para>Put a name in the <filename>Project name:</filename>
                        field.
                        Do not use hyphens as part of the name.
                        </para></listitem>
                    <listitem><para>Click "Next".</para></listitem>
                    <listitem><para>Add information in the
                        <filename>Author</filename> and
                        <filename>Copyright notice</filename> fields.
                        </para></listitem>
                    <listitem><para>Be sure the <filename>License</filename>
                        field is correct.</para></listitem>
                    <listitem><para>Click "Finish".</para></listitem>
                    <listitem><para>If the "open perspective" prompt appears,
                        click "Yes" so that you in the C/C++ perspective.
                        </para></listitem>
                    <listitem><para>The left-hand navigation pane shows your
                        project.
                        You can display your source by double clicking the
                        project's source file.</para></listitem>
                </orderedlist>
            </para>
        </section>

        <section id='configuring-the-cross-toolchains'>
            <title>Configuring the Cross-Toolchains</title>

            <para>
                The earlier section,
                "<link linkend='configuring-the-eclipse-yocto-plug-in'>Configuring the Eclipse Yocto Plug-in</link>",
                sets up the default project configurations.
                You can override these settings for a given project by following
                these steps:
                <orderedlist>
                    <listitem><para>Select "Change Yocto Project Settings" from
                        the "Project" menu.
                        This selection brings up the Yocto Project Settings
                        Dialog and allows you to make changes specific to an
                        individual project.</para>
                        <para>By default, the Cross Compiler Options and Target
                        Options for a project are inherited from settings you
                        provided using the Preferences Dialog as described
                        earlier in the
                        "<link linkend='configuring-the-eclipse-yocto-plug-in'>Configuring the Eclipse Yocto Plug-in</link>" section.
                        The Yocto Project Settings Dialog allows you to override
                        those default settings for a given project.
                        </para></listitem>
                    <listitem><para>Make your configurations for the project
                        and click "OK".
                        </para></listitem>
                    <listitem><para>Right-click in the navigation pane and
                        select "Reconfigure Project" from the pop-up menu.
                        This selection reconfigures the project by running
                        <filename>autogen.sh</filename> in the workspace for
                        your project.
                        The script also runs <filename>libtoolize</filename>,
                        <filename>aclocal</filename>,
                        <filename>autoconf</filename>,
                        <filename>autoheader</filename>,
                        <filename>automake --a</filename>, and
                        <filename>./configure</filename>.
                        Click on the "Console" tab beneath your source code to
                        see the results of reconfiguring your project.
                        </para></listitem>
                </orderedlist>
            </para>
        </section>

        <section id='building-the-project'>
            <title>Building the Project</title>

            <para>
                To build the project select "Build Project" from the
                "Project" menu.
                The console should update and you can note the cross-compiler
                you are using.
                <note>
                    When building "Yocto Project ADT Autotools" projects, the Eclipse
                    IDE might display error messages for Functions/Symbols/Types
                    that cannot be "resolved", even when the related include file
                    is listed at the project navigator and when the project is
                    able to build.
                    For these cases only, it is recommended to add a new linked
                    folder to the appropriate sysroot.
                    Use these steps to add the linked folder:
                    <orderedlist>
                        <listitem><para>
                            Select the project.
                            </para></listitem>
                        <listitem><para>
                            Select "Folder" from the
                            <filename>File > New</filename> menu.
                            </para></listitem>
                        <listitem><para>
                            In the "New Folder" Dialog, select "Link to alternate
                            location (linked folder)".
                            </para></listitem>
                        <listitem><para>
                            Click "Browse" to navigate to the include folder inside
                            the same sysroot location selected in the Yocto Project
                            configuration preferences.
                            </para></listitem>
                        <listitem><para>
                            Click "OK".
                            </para></listitem>
                        <listitem><para>
                            Click "Finish" to save the linked folder.
                            </para></listitem>
                    </orderedlist>
                </note>
            </para>
        </section>

        <section id='starting-qemu-in-user-space-nfs-mode'>
            <title>Starting QEMU in User-Space NFS Mode</title>

            <para>
                To start the QEMU emulator from within Eclipse, follow these
                steps:
                <note>
                    See the
                    "<ulink url='&YOCTO_DOCS_DEV_URL;#dev-manual-qemu'>Using the Quick EMUlator (QEMU)</ulink>"
                    chapter in the Yocto Project Development Manual
                    for more information on using QEMU.
                </note>
                <orderedlist>
                    <listitem><para>Expose and select "External Tools" from
                        the "Run" menu.
                        Your image should appear as a selectable menu item.
                        </para></listitem>
                    <listitem><para>Select your image from the menu to launch
                        the emulator in a new window.
                        </para></listitem>
                    <listitem><para>If needed, enter your host root password in
                        the shell window at the prompt.
                        This sets up a <filename>Tap 0</filename> connection
                        needed for running in user-space NFS mode.
                        </para></listitem>
                    <listitem><para>Wait for QEMU to launch.</para></listitem>
                    <listitem><para>Once QEMU launches, you can begin operating
                        within that environment.
                        One useful task at this point would be to determine the
                        IP Address for the user-space NFS by using the
                       <filename>ifconfig</filename> command.
                       </para></listitem>
                </orderedlist>
            </para>
        </section>

        <section id='deploying-and-debugging-the-application'>
            <title>Deploying and Debugging the Application</title>

            <para>
                Once the QEMU emulator is running the image, you can deploy
                your application using the Eclipse IDE and then use
                the emulator to perform debugging.
                Follow these steps to deploy the application.
                <note>
                    Currently, Eclipse does not support SSH port forwarding.
                    Consequently, if you need to run or debug a remote
                    application using the host display, you must create a
                    tunneling connection from outside Eclipse and keep
                    that connection alive during your work.
                    For example, in a new terminal, run the following:
                    <literallayout class='monospaced'>
     ssh -XY user_name@remote_host_ip
                    </literallayout>
                    After running the command, add the command to be executed
                    in Eclipse's run configuration before the application
                    as follows:
                    <literallayout class='monospaced'>
     export DISPLAY=:10.0
                    </literallayout>
                </note>
                <orderedlist>
                    <listitem><para>Select "Debug Configurations..." from the
                        "Run" menu.</para></listitem>
                    <listitem><para>In the left area, expand
                        <filename>C/C++Remote Application</filename>.
                        </para></listitem>
                    <listitem><para>Locate your project and select it to bring
                        up a new tabbed view in the Debug Configurations Dialog.
                        </para></listitem>
                    <listitem><para>Enter the absolute path into which you want
                        to deploy the application.
                        Use the "Remote Absolute File Path for
                        C/C++Application:" field.
                        For example, enter
                        <filename>/usr/bin/<replaceable>programname</replaceable></filename>.
                        </para></listitem>
                    <listitem><para>Click on the "Debugger" tab to see the
                        cross-tool debugger you are using.</para></listitem>
                    <listitem><para>Click on the "Main" tab.</para></listitem>
                    <listitem><para>Create a new connection to the QEMU instance
                        by clicking on "new".</para></listitem>
                    <listitem><para>Select <filename>TCF</filename>, which means
                        Target Communication Framework.</para></listitem>
                    <listitem><para>Click "Next".</para></listitem>
                    <listitem><para>Clear out the "host name" field and enter
                        the IP Address determined earlier.</para></listitem>
                    <listitem><para>Click "Finish" to close the
                        New Connections Dialog.</para></listitem>
                    <listitem><para>Use the drop-down menu now in the
                        "Connection" field and pick the IP Address you entered.
                         </para></listitem>
                    <listitem><para>Click "Debug" to bring up a login screen
                        and login.</para></listitem>
                    <listitem><para>Accept the debug perspective.
                        </para></listitem>
                </orderedlist>
            </para>
        </section>

        <section id='running-performance-tools'>
            <title>Running Performance Tools</title>

            <para>
                As mentioned earlier in the manual, several tools exist that
                enhance your development experience.
                These tools are aids in developing and debugging applications
                and images.
                You can run these tools from within the Eclipse
                IDE through the "YoctoProjectTools" menu.
                For more information on these tools, see
                <ulink url='http://www.eclipse.org/linuxtools/'>http://www.eclipse.org/linuxtools/</ulink>.
            </para>
        </section>
    </section>
</section>

</chapter>
<!--
vim: expandtab tw=80 ts=4
-->

context:
space:
mode: