prism-firmware: added support of loading 1.8.4 firmware for Prism2/3 CF cards on insert

This will give possibility of using WPA/WPA2 for users which cards have firmware
older then 1.7.4 (which was first version with WPA support).
It is alternative to reflashing cards.

Tested on Prism2 and Prism3 cards, replace all previous ways of supporting them.


git-svn-id: https://svn.o-hand.com/repos/poky/trunk@1999 311d38ba-8fff-0310-9ca6-ca027cbcb966

3 files changed, 67 insertions, 0 deletions

diff --git a/meta/packages/misc-binary-only/prism-firmware.bb b/meta/packages/misc-binary-only/prism-firmware.bb
new file mode 100644
index 0000000000..4b18d865da
--- /dev/null
+++ b/meta/packages/misc-binary-only/prism-firmware.bb
@@ -0,0 +1,30 @@
+DESCRIPTION = "Firmware for the Prism 2.x/3 cards"
+SECTION = "base"
+LICENSE = "closed"
+RDEPENDS = "hostap-utils"
+RREPLACES = "prism3-firmware prism3-support"
+RCONFLICTS = "prism3-firmware prism3-support"
+PACKAGE_ARCH = "all"
+PR = "r1"
+
+SRC_URI = "http://www.red-bean.com/~proski/firmware/Latest-prism.tar.bz2 \
+           file://prism-fw.sh \
+	   file://hostap.rules"
+
+S = "${WORKDIR}/Latest-prism/"
+
+do_install() {
+	install -d ${D}${base_libdir}/firmware/
+	install -d ${D}${base_libdir}/udev/
+	install -d ${D}${sysconfdir}/pcmcia/
+	install -d ${D}${sysconfdir}/udev/rules.d/
+
+	install -m 0644 primary-RAM/*.hex ${D}${base_libdir}/firmware/
+	install -m 0644 secondary-RAM/rf010804.hex ${D}${base_libdir}/firmware/
+
+	install -m 0755 ${WORKDIR}/prism-fw.sh ${D}${base_libdir}/udev/
+	install -m 0644 ${WORKDIR}/hostap.rules ${D}${sysconfdir}/udev/rules.d/
+}
+
+PACKAGES = "${PN}"
+FILES_${PN} += "${base_libdir}"
diff --git a/meta/packages/misc-binary-only/prism-firmware/hostap.rules b/meta/packages/misc-binary-only/prism-firmware/hostap.rules
new file mode 100644
index 0000000000..dece98ae93
--- /dev/null
+++ b/meta/packages/misc-binary-only/prism-firmware/hostap.rules
@@ -0,0 +1,4 @@
+#
+# update firmware on Prism cards (load it to RAM, not to Flash)
+#
+SUBSYSTEM=="net", KERNEL=="wlan*" RUN="/lib/udev/prism-fw.sh"
diff --git a/meta/packages/misc-binary-only/prism-firmware/prism-fw.sh b/meta/packages/misc-binary-only/prism-firmware/prism-fw.sh
new file mode 100644
index 0000000000..c58600791c
--- /dev/null
+++ b/meta/packages/misc-binary-only/prism-firmware/prism-fw.sh
@@ -0,0 +1,33 @@
+#!/bin/sh
+
+CARD_ID=`/usr/sbin/hostap_diag $INTERFACE|grep NICID|awk '{print $2}'|sed -e 's/id=0x//'`
+
+# 801d cards lack even Primary firmware so we cannot use hostap_diag
+PRI=/lib/firmware/pm010102.hex 
+STA=/lib/firmware/rf010804.hex
+
+if [ $CARD_ID = '800c' ] || [ $CARD_ID = '8013' ] || [ $CARD_ID = '8017' ] || \
+   [ $CARD_ID = '801b' ] || [ $CARD_ID = '8022' ] || [ $CARD_ID = '8023' ] ; then
+        PRI=/lib/firmware/ak010104.hex 
+elif [ $CARD_ID = '800b' ] || [ $CARD_ID = '8012' ] || [ $CARD_ID = '8016' ] || \
+     [ $CARD_ID = '801a' ] ; then
+        PRI=/lib/firmware/af010104.hex 
+elif [ $CARD_ID = '800e' ] || [ $CARD_ID = '8015' ] || [ $CARD_ID = '8019' ] || \
+     [ $CARD_ID = '801d' ] ; then
+        PRI=/lib/firmware/pm010102.hex 
+fi
+
+DIR=/proc/net/hostap/wlan0  
+
+if [ ! -d $DIR ]; then
+    exit 1 
+fi
+
+if grep -q no_pri=1 $DIR/debug; then
+    /usr/sbin/prism2_srec -gs wlan0 $PRI   
+    /usr/sbin/prism2_srec -gp wlan0 $PRI 
+fi
+
+if grep -q pri_only=0 $DIR/debug; then
+    /usr/sbin/prism2_srec -rp wlan0 $STA
+fi