aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-12-09xserver-common: disable TCP connectionsJavier Viguera
For security reasons disable TCP connections to the xserver. Signed-off-by: Javier Viguera <javier.viguera@digi.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-12-09at: systemd support now in OE-CorePaul Eggleton
systemd support has already been added to the OE-Core at recipe based on this file (in the dizzy branch). Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-12-09tiptop: Add new recipeQian Lei
Tiptop is a performance monitoring tool for Linux. It provides a dynamic real-time view of the tasks running in the system. Tiptop is very similar to the top utility, but most of the information displayed comes from hardware counters. Signed-off-by: Qian Lei <qianl.fnst@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-12-09takao-fonts: add new recipeLi xin
Takao Fonts are a community developed derivatives of IPA Fonts. IPA Fonts are high quality Japanese outline fonts developed by Information-technology Promotion Agency,Japan(called IPA for short). Homepage: https://launchpad.net/takao-fonts Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-12-03ufw: Uncomplicated Firewall recipeJoe MacDonald
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2014-12-03MAINTAINERS: add self for recipes-netkitArmin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2014-12-03netkit-rwho: New packageMiLo
This adds rwho and rwhod Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2014-12-03netkit-rpc: New packageArmin Kuster
this adds rpcinfo and rpcgen Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2014-12-03netkit-rusers: new packageArmin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2014-12-02Revert "open-iscsi: add recipe"Joe MacDonald
This reverts commit 97cffc1f247be7eedd061a142d9c366b63f691ed. Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2014-11-30netkit-ftp: new recipeArmin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2014-11-30open-iscsi: add recipeLi xin
Open-iSCSI project is a high performance, transport independent, multi-platform implementation of RFC3720. Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2014-11-30sethdlc: fix host contaminationWenzong Fan
* Clean INCLUDES to fix the host contamination errors: In file included from /usr/src/linux/include/linux/posix_types.h:47:0, from /usr/src/linux/include/linux/types.h:17, from /usr/src/linux/include/linux/if.h:22, from sethdlc.c:23: /usr/src/linux/include/asm-generic/posix_types.h:91:3: \ error: conflicting types for '__kernel_fsid_t' } __kernel_fsid_t; ^ .../tmp/sysroots/qemumips/usr/include/asm/posix_types.h:26:3: \ note: previous declaration of '__kernel_fsid_t' was here } __kernel_fsid_t; ^ * Correct LIC_FILES_CHKSUM to checkout license infos from sethdl.c instead of Makefile. Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2014-11-28meta-gpe: Add LAYERVERSION and LAYERDEPENDSJackie Huang
According to README, it depends on oe-core and openembedded-layer Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-28meta-gnome: Add LAYERVERSION and LAYERDEPENDSJackie Huang
According to README, it depends on oe-core and openembedded-layer Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-28meta-filesystems: Add LAYERVERSION and LAYERDEPENDSJackie Huang
According to README, it depends on oe-core and openembedded-layer Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-28meta-efl: Add LAYERVERSION and LAYERDEPENDSJackie Huang
According to README, it depends on oe-core and openembedded-layer Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-28toolchain-layer: Add LAYERVERSION and LAYERDEPENDSJackie Huang
According to README, it depends on oe-core layer Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-28meta-ruby: Add LAYERVERSION and LAYERDEPENDSJackie Huang
According to README, it depends on oe-core and openembedded-layer Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-28meta-python: Add LAYERVERSION and LAYERDEPENDSJackie Huang
According to README, it depends on oe-core and openembedded-layer Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-28meta-perl: Add LAYERVERSION and LAYERDEPENDSJackie Huang
According to README, it depends on oe-core layer Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-28meta-oe: Add LAYERVERSION and LAYERDEPENDSJackie Huang
According to README, it depends on oe-core layer Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-28iotop: Drop python-distutils from RDEPENDSMartin Jansa
* nothing in iotop is using that for normal function Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-28acpitests: Blacklist failing recipeMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-28cronie: rename .bbappend to match all versionsMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-28umip: add new recipeQian Lei
UMIP is an open source implementation of Mobile IPv6 and NEMO Basic Support for Linux. It is released under the GPLv2 license. It supports the following IETF RFC: RFC6275 (Mobile IPv6), RFC3963 (NEMO), RFC3776 and RFC4877 (IPsec and IKEv2). Signed-off-by: Qian Lei <qianl.fnst@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-28indent: Add new recipeQian Lei
Indent is a GNU program for beautifying C code, so that it is easier to read. Indent can also convert from one C writing style to a different one. Indent understands correct C syntax and tries to handle incorrect C syntax. Signed-off-by: Qian Lei <qianl.fnst@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24meta-networking: update LAYERDEPENDSJoe MacDonald
A minor typo was causing LAYERDEPENDS to be overwritten instead of appended to in our layer.conf. Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2014-11-24fwts: update to 14.09.00 releaseFathi Boudra
* bump PV and matching SRCREV * add glib-2.0 to DEPENDS, introduced in 14.09.00 with logind support Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24lvm2: add lvm.con to CONFFILESLiu Jian
* Files will be over written when updating using rpm. * If there is no %config micro before the file in the spec file, this file will be over-written after updating this package using rpm. This will make our settings lost. Signed-off-by: Jian Liu <jian.liu@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24mariadb: add dependency libeventKang Kai
mariadb failed to build: | make[2]: *** No rule to make target '/.../bitbake_build/tmp/sysroots/qemux86-64/usr/lib64/libevent.so', needed by 'tests/async_queries'. Stop. | make[2]: Leaving directory '/.../bitbake_build/tmp/work/core2-64-wrs-linux/mariadb/5.5.40-r0/build' CMakeFiles/Makefile2:6742: recipe for target 'tests/CMakeFiles/async_queries.dir/all' failed | make[1]: *** [tests/CMakeFiles/async_queries.dir/all] Error 2 It is an rare case that when configure mariadb, libevent exists in sysroot. But when do compile for mariadb, libevent is gone somehow. That causes build fails. Run follow commands could reproduce this error: $ bitbake libevent $ bitbake mariadb -c cleansstate $ bitbake mariadb -c configure $ bitbake libevent -c clean $ bitbake mariadb Add if without libevent, test case tests/async_queries.c will not be built. The case is helpful to do unit test. So add libevent as a dependency to fix the error and make sure async_queries.c will be built. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24mariadb: re-package configure filesKang Kai
There are 3 configure files under /etc/my.cnf.d: client.cnf: options for client library mysql-clients.cnf: options for MariaDB tools such as mysqladmin, etc server.cnf: options for server They are packaged to mariadb-leftover at this moment. That is not correct. Split them into sub-packages: client.cnf --> libmysqlclient mysql-clients.cnf --> mariadb-client server.cnf --> mariadb-server Make these files as configure file by CONFFILES and update global configure file my.cnf to include /etc/my.cnf.d as well. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24mariadb: Update from version 5.5.39 to 5.5.40Kang Kai
* rename mariadb_5.5.39.inc -> mariadb.inc * add dependency bision-native for mariadb-native * add revert-fix-for-MDEV-5120.patch to revert an commit for mariadb test suite which causes packages mysql-python and modphp fail to build * add PACKAGECONFIG 'libedit' Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24mariadb: Check valgrind headers only if WITH_VALGRIND is setJackie Huang
Changes: - Add patch to check valgrind headers only if WITH_VALGRIND is set - Add PACKAGECONFIG for valgrind and disable it by default Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24python-ujson: add recipe for 1.33Derek Straka
Signed-off-by: Derek Straka <derek@minotaurinc.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24python-tornado: add recipe for 4.0.2Derek Straka
Signed-off-by: Derek Straka <derek@minotaurinc.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24python-certifi: add recipe for 14.05.14Derek Straka
Signed-off-by: Derek Straka <derek@minotaurinc.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24python-backports-ssl: add recipe for 3.4.0.2Derek Straka
Signed-off-by: Derek Straka <derek@minotaurinc.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24dash: Port from openembedded and upgrade to 0.5.8Bian Naimeng
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24hostapd: several fixes for init scriptJackie Huang
* restart: The stop may delay a few seconds according to different wireless devices, on debian/ubuntu, the init script directly sleep 8 seconds to wait the stop complete, here we add a delay function (sleep in a loop) to ensure the stop is completed before start. * add status command. * add --oknodo for stop so it will not break restart if there is no running process. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24glibmm: add perl to RDEPENDS_{PN}-devAndreas Müller
QA Issue: glibmm-dev requires /usr/bin/perl, but no providers in its RDEPENDS [file-rdeps] Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24gparted: initial add 0.20.0Andreas Müller
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24krb5: fix CVE-2014-5351Wenzong Fan
The kadm5_randkey_principal_3 function in lib/kadm5/srv/svr_principal.c in kadmind in MIT Kerberos 5 (aka krb5) before 1.13 sends old keys in a response to a -randkey -keepold request, which allows remote authentic- ated users to forge tickets by leveraging administrative access. This back-ported patch fixes CVE-2014-5351. Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24python-flufl-enum: add recipe for 4.0.1Derek Straka
Signed-off-by: Derek Straka <derek@minotaurinc.com> Acked-by: Tim Orling <TicoTimo@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24rrdtool: add missing dependency on groff-nativeJackie Huang
rrdtool needs groff-native to format the documentation. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24rrdtool: inherit cpan-base to help build perl modulesJackie Huang
It's incorrect to use -I for nativeperl to specify @INC/#include directory to target build perl, which cause error like: | temp/do_configure/run.do_configure.20749: line 112: 20256 Illegal instruction (core dumped) | perl -I/path/to/tmp/sysroots/intel-haswell-64/usr/lib64/perl/$perl_version Makefile.PL Inherit cpan-base and set related env vars to fix this and avoid using sed to hack Makefile when build perl modules. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24dfu-util: Point to gitorious.org repository as gnumonks.org is downChris Morgan
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Chris Morgan <chmorgan@gmail.com>
2014-11-24gupnp-av: use GNOME_MIRROR in SRC_URIRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24gupnp: use GNOME_MIRROR in SRC_URIRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-11-24gssdp: use GNOME_MIRROR in SRC_URIRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>