#
# System Type
#
CONFIG_ARCH_SA1100=y

#
# SA11x0 Implementations
#
CONFIG_SA1100_COLLIE=y

#
# Processor Type
#
CONFIG_CPU_SA1100=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_V4WB=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WB=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_USE_DOMAINS=y

#
# Processor Features
#
CONFIG_SHARP_LOCOMO=y

#
# PC-card bridges
#
CONFIG_PCMCIA_SA11XX_BASE=y
CONFIG_PCMCIA_SA1100=y

#
# Kernel Features
#
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y

#
# Boot options
#
CONFIG_CMDLINE="console=ttySA0,115200n8 console=tty1 fbcon=rotate:1 loglevel=3"

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
CONFIG_MTD_CFI_GEOMETRY=y

# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set

# CONFIG_MTD_CFI_I1 is not set
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_UTIL=y

CONFIG_MTD_OTP=y

#
# Mapping drivers for chip access
#
CONFIG_MTD_SA1100=y

#
# Non-8250 serial port support
# 
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y

#
# Multimedia Capabilities Port drivers
#
CONFIG_MCP=y
CONFIG_MCP_SA11X0=y
CONFIG_MCP_UCB1200=y
CONFIG_MCP_UCB1200_TS=y

#
# Input Device Drivers
#
CONFIG_KEYBOARD_LOCOMO=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320

#
# Frame buffer hardware drivers
#
CONFIG_FB_SA1100=y
CONFIG_BACKLIGHT_LOCOMO=y

#
# Console display driver support
#
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONT_8x8=y

#
# LED drivers
#
CONFIG_LEDS_LOCOMO=y

#
# MODULbus GPIO expanders:
#
CONFIG_BATTERY_COLLIE=y