diff options
Diffstat (limited to 'recipes-kernel/linux/linux-handhelds-2.6.inc')
| -rw-r--r-- | recipes-kernel/linux/linux-handhelds-2.6.inc | 126 |
1 files changed, 0 insertions, 126 deletions
diff --git a/recipes-kernel/linux/linux-handhelds-2.6.inc b/recipes-kernel/linux/linux-handhelds-2.6.inc deleted file mode 100644 index d92e324..0000000 --- a/recipes-kernel/linux/linux-handhelds-2.6.inc +++ /dev/null @@ -1,126 +0,0 @@ -SECTION = "kernel" -DESCRIPTION = "handhelds.org Linux kernel 2.6 for PocketPCs and other consumer handheld devices." -LICENSE = "GPLv2" - -COMPATIBLE_HOST = "arm.*-linux" -COMPATIBLE_MACHINE ?= "(asus620|asus730|aximx50|aximx50v|eseries|h1910|h2200|h3600|h3800|h3900|h4000|h5000|htcalpine|htcapache|htcblueangel|htchermes|htchimalaya|htcsable|htcuniversal|htcwallaby|hx4700|ghi270|looxc550|jornada56x|magician|rx1950|rx3000)" - -# SRC_URI *must* be overriden in includer, but this is a good reference -SRC_URI ?= "${HANDHELDS_CVS};module=linux/kernel26;tag=${@'K' + bb.data.getVar('PV',d,1).replace('.', '-')} \ - file://24-hostap_cs_id.diff \ - file://hrw-pcmcia-ids-r2.patch \ - file://defconfig" - -S = "${WORKDIR}/kernel26" - -inherit kernel - - -K_MAJOR ?= "${@bb.data.getVar('PV',d,1).split('-')[0].split('.')[0]}" -K_MINOR ?= "${@bb.data.getVar('PV',d,1).split('-')[0].split('.')[1]}" -K_MICRO ?= "${@bb.data.getVar('PV',d,1).split('-')[0].split('.')[2]}" -HHV ?= "${@bb.data.getVar('PV',d,1).split('-')[1].split('hh')[-1]}" - -KERNEL_PRIORITY = "${@'%d' % (int(bb.data.getVar('K_MAJOR',d,1)) * 100000000 + int(bb.data.getVar('K_MINOR',d,1)) * 1000000 + int(bb.data.getVar('K_MICRO',d,1)) * 10000 + float(bb.data.getVar('HHV',d,1)))}" - -do_configure() { - - if [ `grep EXTRAVERSION Makefile | grep hh | awk '{print $3}' | sed s/-hh//` != ${HHV} ]; then - die "-hh version mismatch" - fi - - rm -f ${S}/.config - - if [ ! -e ${WORKDIR}/defconfig ]; then - die "No default configuration for ${MACHINE} available." - fi - - if [ -n "${KERNEL_INITRAMFS_PATH}" -a "${ANGSTROMLIBC}" = "glibc" ]; then - if [ ! -f ${KERNEL_INITRAMFS_PATH} ]; then - echo "Kernel is requested to be built with internal initramfs." - echo "The initramfs image must exist prior to building the kernel, but it does not" - echo "exist at the specified path ${KERNEL_INITRAMFS_PATH}. You may need to bitbake" - echo "it separately, possibly, with a different set of bitbake options. Please" - echo "consult documentation for your distro." - exit 1 - fi - - # Kernel expects non-compressed cpio - gzip -d -c ${KERNEL_INITRAMFS_PATH} >${WORKDIR}/initramfs.cpio - echo "CONFIG_INITRAMFS_SOURCE=\"${WORKDIR}/initramfs.cpio\"" >> ${S}/.config - fi - - if [ "${TARGET_OS}" = "linux-gnueabi" -o "${TARGET_OS}" = "linux-uclibceabi" ]; then - echo "CONFIG_AEABI=y" >> ${S}/.config - echo "CONFIG_OABI_COMPAT=y" >> ${S}/.config - else - echo "# CONFIG_AEABI is not set" >> ${S}/.config - echo "# CONFIG_OABI_COMPAT is not set" >> ${S}/.config - fi - - sed -e '/CONFIG_AEABI/d' \ - -e '/CONFIG_OABI_COMPAT=/d' \ - -e '/CONFIG_INITRAMFS_SOURCE=/d' \ - '${WORKDIR}/defconfig' >>'${S}/.config' - - yes '' | oe_runmake oldconfig - -} - -do_deploy_append() { - #reflash.ctl is required to reflash using bootldr - # format: - # name file md5sumfile destination - mkdir -p ${DEPLOY_DIR_IMAGE} - echo "${MACHINE}-kernel-${DATETIME} ${KERNEL_IMAGE_BASE_NAME} - kernel" >> ${DEPLOY_DIR_IMAGE}/reflash.ctl - gen_haret_startup - - if [ -n "${KERNEL_INITRAMFS_PATH}" -a "${ANGSTROMLIBC}" = "glibc" ]; then - cp ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_BASE_NAME}.bin ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-$(basename ${KERNEL_INITRAMFS_PATH} | awk -F. '{print $1}')-${PV}-${PR}-${MACHINE}.bin - fi -} - - -gen_haret_startup() { - cat >${DEPLOY_DIR_IMAGE}/startup.txt <<EOF -# This is startup file for HaRET, Linux bootloader for WinCE -# http://handhelds.org/wiki/HaRET - -set kernel "${KERNEL_IMAGE_BASE_NAME}.bin" - -# Boot choices. Uncomment 'set' statements in exactly one section - -## Choice 1 - Boot from SD/MMC card -# Have 2 partition on a card: -# 1st - FAT with HaRET executable, this file and zImage above -# 2nd - EXT2 with rootfs tarball extracted -set cmdline "root=/dev/mmcblk0p2 rootdelay=10 console=ttyS0,115200n8 console=tty0" - -## Choice 2 - Boot from CF card, setup like above -#set cmdline "root=/dev/hda2 rootdelay=10 console=ttyS0,115200n8 console=tty0" - -## Choice 3 - Boot kernel with builtin interactive bootloader (initramfs-bootmenu-image) -# rootdelay is a wait before scanning for the available partitions -# if root= is also specified, interactive selection will be skipped and -# direct boot will happen. -#set cmdline "rootdelay=3 console=ttyS0,115200n8 console=tty0" - -## Choice 4 - Boot rootfs image as initramfs (works only for smaller images) -# have a cpio.gz file below together with zImage, no EXT2 partition required -#set initrd "<image>.rootfs.cpio.gz" -#set cmdline "rdinit=/sbin/init console=ttyS0,115200n8 console=tty0" - -## Choice 5 - Boot via NFS over USB networking (must be kernel-builtin -# or initramfs-*-image works too) -# 192.168.x.x - Server address (the other side) -# 192.168.y.y - Handheld's address -#set cmdline "root=/dev/nfs nfsroot=192.168.x.x:<nfs_path> ip=192.168.y.y:192.168.x.x:192.168.x.x:255.255.255.0:pda:usb0 console=ttyS0,115200n8 console=tty0" - -## Choice 6 - Boot from MTD partition, for devices with lots of flash -# to have both WinCE and Linux there. Note the value of root param, -# that's how it should be, not "/dev/mtdblockN". -#set cmdline "root=mtdN console=ttyS0,115200n8 console=tty0" - -bootlinux -EOF -} |